1// SPDX-License-Identifier: GPL-2.0+ 2/* 3 * intel TCO Watchdog Driver 4 * 5 * (c) Copyright 2006-2011 Wim Van Sebroeck <wim@iguana.be>. 6 * 7 * Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor 8 * provide warranty for any of this software. This material is 9 * provided "AS-IS" and at no charge. 10 * 11 * The TCO watchdog is implemented in the following I/O controller hubs: 12 * (See the intel documentation on http://developer.intel.com.) 13 * document number 290655-003, 290677-014: 82801AA (ICH), 82801AB (ICHO) 14 * document number 290687-002, 298242-027: 82801BA (ICH2) 15 * document number 290733-003, 290739-013: 82801CA (ICH3-S) 16 * document number 290716-001, 290718-007: 82801CAM (ICH3-M) 17 * document number 290744-001, 290745-025: 82801DB (ICH4) 18 * document number 252337-001, 252663-008: 82801DBM (ICH4-M) 19 * document number 273599-001, 273645-002: 82801E (C-ICH) 20 * document number 252516-001, 252517-028: 82801EB (ICH5), 82801ER (ICH5R) 21 * document number 300641-004, 300884-013: 6300ESB 22 * document number 301473-002, 301474-026: 82801F (ICH6) 23 * document number 313082-001, 313075-006: 631xESB, 632xESB 24 * document number 307013-003, 307014-024: 82801G (ICH7) 25 * document number 322896-001, 322897-001: NM10 26 * document number 313056-003, 313057-017: 82801H (ICH8) 27 * document number 316972-004, 316973-012: 82801I (ICH9) 28 * document number 319973-002, 319974-002: 82801J (ICH10) 29 * document number 322169-001, 322170-003: 5 Series, 3400 Series (PCH) 30 * document number 320066-003, 320257-008: EP80597 (IICH) 31 * document number 324645-001, 324646-001: Cougar Point (CPT) 32 * document number TBD : Patsburg (PBG) 33 * document number TBD : DH89xxCC 34 * document number TBD : Panther Point 35 * document number TBD : Lynx Point 36 * document number TBD : Lynx Point-LP 37 */ 38 39/* 40 * Includes, defines, variables, module parameters, ... 41 */ 42 43#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 44 45/* Module and version information */ 46#define DRV_NAME "iTCO_wdt" 47#define DRV_VERSION "1.11" 48 49/* Includes */ 50#include <linux/acpi.h> /* For ACPI support */ 51#include <linux/bits.h> /* For BIT() */ 52#include <linux/module.h> /* For module specific items */ 53#include <linux/moduleparam.h> /* For new moduleparam's */ 54#include <linux/types.h> /* For standard types (like size_t) */ 55#include <linux/errno.h> /* For the -ENODEV/... values */ 56#include <linux/kernel.h> /* For printk/panic/... */ 57#include <linux/watchdog.h> /* For the watchdog specific items */ 58#include <linux/init.h> /* For __init/__exit/... */ 59#include <linux/fs.h> /* For file operations */ 60#include <linux/platform_device.h> /* For platform_driver framework */ 61#include <linux/pci.h> /* For pci functions */ 62#include <linux/ioport.h> /* For io-port access */ 63#include <linux/spinlock.h> /* For spin_lock/spin_unlock/... */ 64#include <linux/uaccess.h> /* For copy_to_user/put_user/... */ 65#include <linux/io.h> /* For inb/outb/... */ 66#include <linux/platform_data/itco_wdt.h> 67#include <linux/mfd/intel_pmc_bxt.h> 68 69#include "iTCO_vendor.h" 70 71/* Address definitions for the TCO */ 72/* TCO base address */ 73#define TCOBASE(p) ((p)->tco_res->start) 74/* SMI Control and Enable Register */ 75#define SMI_EN(p) ((p)->smi_res->start) 76 77#define TCO_RLD(p) (TCOBASE(p) + 0x00) /* TCO Timer Reload/Curr. Value */ 78#define TCOv1_TMR(p) (TCOBASE(p) + 0x01) /* TCOv1 Timer Initial Value*/ 79#define TCO_DAT_IN(p) (TCOBASE(p) + 0x02) /* TCO Data In Register */ 80#define TCO_DAT_OUT(p) (TCOBASE(p) + 0x03) /* TCO Data Out Register */ 81#define TCO1_STS(p) (TCOBASE(p) + 0x04) /* TCO1 Status Register */ 82#define TCO2_STS(p) (TCOBASE(p) + 0x06) /* TCO2 Status Register */ 83#define TCO1_CNT(p) (TCOBASE(p) + 0x08) /* TCO1 Control Register */ 84#define TCO2_CNT(p) (TCOBASE(p) + 0x0a) /* TCO2 Control Register */ 85#define TCOv2_TMR(p) (TCOBASE(p) + 0x12) /* TCOv2 Timer Initial Value*/ 86 87/* internal variables */ 88struct iTCO_wdt_private { 89 struct watchdog_device wddev; 90 91 /* TCO version/generation */ 92 unsigned int iTCO_version; 93 struct resource *tco_res; 94 struct resource *smi_res; 95 /* 96 * NO_REBOOT flag is Memory-Mapped GCS register bit 5 (TCO version 2), 97 * or memory-mapped PMC register bit 4 (TCO version 3). 98 */ 99 struct resource *gcs_pmc_res; 100 unsigned long __iomem *gcs_pmc; 101 /* the lock for io operations */ 102 spinlock_t io_lock; 103 /* the PCI-device */ 104 struct pci_dev *pci_dev; 105 /* whether or not the watchdog has been suspended */ 106 bool suspended; 107 /* no reboot API private data */ 108 void *no_reboot_priv; 109 /* no reboot update function pointer */ 110 int (*update_no_reboot_bit)(void *p, bool set); 111}; 112 113/* module parameters */ 114#define WATCHDOG_TIMEOUT 30 /* 30 sec default heartbeat */ 115static int heartbeat = WATCHDOG_TIMEOUT; /* in seconds */ 116module_param(heartbeat, int, 0); 117MODULE_PARM_DESC(heartbeat, "Watchdog timeout in seconds. " 118 "5..76 (TCO v1) or 3..614 (TCO v2), default=" 119 __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); 120 121static bool nowayout = WATCHDOG_NOWAYOUT; 122module_param(nowayout, bool, 0); 123MODULE_PARM_DESC(nowayout, 124 "Watchdog cannot be stopped once started (default=" 125 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); 126 127static int turn_SMI_watchdog_clear_off = 1; 128module_param(turn_SMI_watchdog_clear_off, int, 0); 129MODULE_PARM_DESC(turn_SMI_watchdog_clear_off, 130 "Turn off SMI clearing watchdog (depends on TCO-version)(default=1)"); 131 132/* 133 * Some TCO specific functions 134 */ 135 136/* 137 * The iTCO v1 and v2's internal timer is stored as ticks which decrement 138 * every 0.6 seconds. v3's internal timer is stored as seconds (some 139 * datasheets incorrectly state 0.6 seconds). 140 */ 141static inline unsigned int seconds_to_ticks(struct iTCO_wdt_private *p, 142 int secs) 143{ 144 return p->iTCO_version == 3 ? secs : (secs * 10) / 6; 145} 146 147static inline unsigned int ticks_to_seconds(struct iTCO_wdt_private *p, 148 int ticks) 149{ 150 return p->iTCO_version == 3 ? ticks : (ticks * 6) / 10; 151} 152 153static inline u32 no_reboot_bit(struct iTCO_wdt_private *p) 154{ 155 u32 enable_bit; 156 157 switch (p->iTCO_version) { 158 case 5: 159 case 3: 160 enable_bit = 0x00000010; 161 break; 162 case 2: 163 enable_bit = 0x00000020; 164 break; 165 case 4: 166 case 1: 167 default: 168 enable_bit = 0x00000002; 169 break; 170 } 171 172 return enable_bit; 173} 174 175static int update_no_reboot_bit_def(void *priv, bool set) 176{ 177 return 0; 178} 179 180static int update_no_reboot_bit_pci(void *priv, bool set) 181{ 182 struct iTCO_wdt_private *p = priv; 183 u32 val32 = 0, newval32 = 0; 184 185 pci_read_config_dword(p->pci_dev, 0xd4, &val32); 186 if (set) 187 val32 |= no_reboot_bit(p); 188 else 189 val32 &= ~no_reboot_bit(p); 190 pci_write_config_dword(p->pci_dev, 0xd4, val32); 191 pci_read_config_dword(p->pci_dev, 0xd4, &newval32); 192 193 /* make sure the update is successful */ 194 if (val32 != newval32) 195 return -EIO; 196 197 return 0; 198} 199 200static int update_no_reboot_bit_mem(void *priv, bool set) 201{ 202 struct iTCO_wdt_private *p = priv; 203 u32 val32 = 0, newval32 = 0; 204 205 val32 = readl(p->gcs_pmc); 206 if (set) 207 val32 |= no_reboot_bit(p); 208 else 209 val32 &= ~no_reboot_bit(p); 210 writel(val32, p->gcs_pmc); 211 newval32 = readl(p->gcs_pmc); 212 213 /* make sure the update is successful */ 214 if (val32 != newval32) 215 return -EIO; 216 217 return 0; 218} 219 220static int update_no_reboot_bit_cnt(void *priv, bool set) 221{ 222 struct iTCO_wdt_private *p = priv; 223 u16 val, newval; 224 225 val = inw(TCO1_CNT(p)); 226 if (set) 227 val |= BIT(0); 228 else 229 val &= ~BIT(0); 230 outw(val, TCO1_CNT(p)); 231 newval = inw(TCO1_CNT(p)); 232 233 /* make sure the update is successful */ 234 return val != newval ? -EIO : 0; 235} 236 237static int update_no_reboot_bit_pmc(void *priv, bool set) 238{ 239 struct intel_pmc_dev *pmc = priv; 240 u32 bits = PMC_CFG_NO_REBOOT_EN; 241 u32 value = set ? bits : 0; 242 243 return intel_pmc_gcr_update(pmc, PMC_GCR_PMC_CFG_REG, bits, value); 244} 245 246static void iTCO_wdt_no_reboot_bit_setup(struct iTCO_wdt_private *p, 247 struct platform_device *pdev, 248 struct itco_wdt_platform_data *pdata) 249{ 250 if (pdata->no_reboot_use_pmc) { 251 struct intel_pmc_dev *pmc = dev_get_drvdata(pdev->dev.parent); 252 253 p->update_no_reboot_bit = update_no_reboot_bit_pmc; 254 p->no_reboot_priv = pmc; 255 return; 256 } 257 258 if (p->iTCO_version >= 6) 259 p->update_no_reboot_bit = update_no_reboot_bit_cnt; 260 else if (p->iTCO_version >= 2) 261 p->update_no_reboot_bit = update_no_reboot_bit_mem; 262 else if (p->iTCO_version == 1) 263 p->update_no_reboot_bit = update_no_reboot_bit_pci; 264 else 265 p->update_no_reboot_bit = update_no_reboot_bit_def; 266 267 p->no_reboot_priv = p; 268} 269 270static int iTCO_wdt_start(struct watchdog_device *wd_dev) 271{ 272 struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev); 273 unsigned int val; 274 275 spin_lock(&p->io_lock); 276 277 iTCO_vendor_pre_start(p->smi_res, wd_dev->timeout); 278 279 /* disable chipset's NO_REBOOT bit */ 280 if (p->update_no_reboot_bit(p->no_reboot_priv, false)) { 281 spin_unlock(&p->io_lock); 282 pr_err("failed to reset NO_REBOOT flag, reboot disabled by hardware/BIOS\n"); 283 return -EIO; 284 } 285 286 /* Force the timer to its reload value by writing to the TCO_RLD 287 register */ 288 if (p->iTCO_version >= 2) 289 outw(0x01, TCO_RLD(p)); 290 else if (p->iTCO_version == 1) 291 outb(0x01, TCO_RLD(p)); 292 293 /* Bit 11: TCO Timer Halt -> 0 = The TCO timer is enabled to count */ 294 val = inw(TCO1_CNT(p)); 295 val &= 0xf7ff; 296 outw(val, TCO1_CNT(p)); 297 val = inw(TCO1_CNT(p)); 298 spin_unlock(&p->io_lock); 299 300 if (val & 0x0800) 301 return -1; 302 return 0; 303} 304 305static int iTCO_wdt_stop(struct watchdog_device *wd_dev) 306{ 307 struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev); 308 unsigned int val; 309 310 spin_lock(&p->io_lock); 311 312 iTCO_vendor_pre_stop(p->smi_res); 313 314 /* Bit 11: TCO Timer Halt -> 1 = The TCO timer is disabled */ 315 val = inw(TCO1_CNT(p)); 316 val |= 0x0800; 317 outw(val, TCO1_CNT(p)); 318 val = inw(TCO1_CNT(p)); 319 320 /* Set the NO_REBOOT bit to prevent later reboots, just for sure */ 321 p->update_no_reboot_bit(p->no_reboot_priv, true); 322 323 spin_unlock(&p->io_lock); 324 325 if ((val & 0x0800) == 0) 326 return -1; 327 return 0; 328} 329 330static int iTCO_wdt_ping(struct watchdog_device *wd_dev) 331{ 332 struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev); 333 334 spin_lock(&p->io_lock); 335 336 /* Reload the timer by writing to the TCO Timer Counter register */ 337 if (p->iTCO_version >= 2) { 338 outw(0x01, TCO_RLD(p)); 339 } else if (p->iTCO_version == 1) { 340 /* Reset the timeout status bit so that the timer 341 * needs to count down twice again before rebooting */ 342 outw(0x0008, TCO1_STS(p)); /* write 1 to clear bit */ 343 344 outb(0x01, TCO_RLD(p)); 345 } 346 347 spin_unlock(&p->io_lock); 348 return 0; 349} 350 351static int iTCO_wdt_set_timeout(struct watchdog_device *wd_dev, unsigned int t) 352{ 353 struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev); 354 unsigned int val16; 355 unsigned char val8; 356 unsigned int tmrval; 357 358 tmrval = seconds_to_ticks(p, t); 359 360 /* For TCO v1 the timer counts down twice before rebooting */ 361 if (p->iTCO_version == 1) 362 tmrval /= 2; 363 364 /* from the specs: */ 365 /* "Values of 0h-3h are ignored and should not be attempted" */ 366 if (tmrval < 0x04) 367 return -EINVAL; 368 if ((p->iTCO_version >= 2 && tmrval > 0x3ff) || 369 (p->iTCO_version == 1 && tmrval > 0x03f)) 370 return -EINVAL; 371 372 /* Write new heartbeat to watchdog */ 373 if (p->iTCO_version >= 2) { 374 spin_lock(&p->io_lock); 375 val16 = inw(TCOv2_TMR(p)); 376 val16 &= 0xfc00; 377 val16 |= tmrval; 378 outw(val16, TCOv2_TMR(p)); 379 val16 = inw(TCOv2_TMR(p)); 380 spin_unlock(&p->io_lock); 381 382 if ((val16 & 0x3ff) != tmrval) 383 return -EINVAL; 384 } else if (p->iTCO_version == 1) { 385 spin_lock(&p->io_lock); 386 val8 = inb(TCOv1_TMR(p)); 387 val8 &= 0xc0; 388 val8 |= (tmrval & 0xff); 389 outb(val8, TCOv1_TMR(p)); 390 val8 = inb(TCOv1_TMR(p)); 391 spin_unlock(&p->io_lock); 392 393 if ((val8 & 0x3f) != tmrval) 394 return -EINVAL; 395 } 396 397 wd_dev->timeout = t; 398 return 0; 399} 400 401static unsigned int iTCO_wdt_get_timeleft(struct watchdog_device *wd_dev) 402{ 403 struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev); 404 unsigned int val16; 405 unsigned char val8; 406 unsigned int time_left = 0; 407 408 /* read the TCO Timer */ 409 if (p->iTCO_version >= 2) { 410 spin_lock(&p->io_lock); 411 val16 = inw(TCO_RLD(p)); 412 val16 &= 0x3ff; 413 spin_unlock(&p->io_lock); 414 415 time_left = ticks_to_seconds(p, val16); 416 } else if (p->iTCO_version == 1) { 417 spin_lock(&p->io_lock); 418 val8 = inb(TCO_RLD(p)); 419 val8 &= 0x3f; 420 if (!(inw(TCO1_STS(p)) & 0x0008)) 421 val8 += (inb(TCOv1_TMR(p)) & 0x3f); 422 spin_unlock(&p->io_lock); 423 424 time_left = ticks_to_seconds(p, val8); 425 } 426 return time_left; 427} 428 429/* Returns true if the watchdog was running */ 430static bool iTCO_wdt_set_running(struct iTCO_wdt_private *p) 431{ 432 u16 val; 433 434 /* Bit 11: TCO Timer Halt -> 0 = The TCO timer is enabled */ 435 val = inw(TCO1_CNT(p)); 436 if (!(val & BIT(11))) { 437 set_bit(WDOG_HW_RUNNING, &p->wddev.status); 438 return true; 439 } 440 return false; 441} 442 443/* 444 * Kernel Interfaces 445 */ 446 447static const struct watchdog_info ident = { 448 .options = WDIOF_SETTIMEOUT | 449 WDIOF_KEEPALIVEPING | 450 WDIOF_MAGICCLOSE, 451 .firmware_version = 0, 452 .identity = DRV_NAME, 453}; 454 455static const struct watchdog_ops iTCO_wdt_ops = { 456 .owner = THIS_MODULE, 457 .start = iTCO_wdt_start, 458 .stop = iTCO_wdt_stop, 459 .ping = iTCO_wdt_ping, 460 .set_timeout = iTCO_wdt_set_timeout, 461 .get_timeleft = iTCO_wdt_get_timeleft, 462}; 463 464/* 465 * Init & exit routines 466 */ 467 468static int iTCO_wdt_probe(struct platform_device *pdev) 469{ 470 struct device *dev = &pdev->dev; 471 struct itco_wdt_platform_data *pdata = dev_get_platdata(dev); 472 struct iTCO_wdt_private *p; 473 unsigned long val32; 474 int ret; 475 476 if (!pdata) 477 return -ENODEV; 478 479 p = devm_kzalloc(dev, sizeof(*p), GFP_KERNEL); 480 if (!p) 481 return -ENOMEM; 482 483 spin_lock_init(&p->io_lock); 484 485 p->tco_res = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_IO_TCO); 486 if (!p->tco_res) 487 return -ENODEV; 488 489 p->iTCO_version = pdata->version; 490 p->pci_dev = to_pci_dev(dev->parent); 491 492 p->smi_res = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_IO_SMI); 493 if (p->smi_res) { 494 /* The TCO logic uses the TCO_EN bit in the SMI_EN register */ 495 if (!devm_request_region(dev, p->smi_res->start, 496 resource_size(p->smi_res), 497 pdev->name)) { 498 pr_err("I/O address 0x%04llx already in use, device disabled\n", 499 (u64)SMI_EN(p)); 500 return -EBUSY; 501 } 502 } else if (iTCO_vendorsupport || 503 turn_SMI_watchdog_clear_off >= p->iTCO_version) { 504 pr_err("SMI I/O resource is missing\n"); 505 return -ENODEV; 506 } 507 508 iTCO_wdt_no_reboot_bit_setup(p, pdev, pdata); 509 510 /* 511 * Get the Memory-Mapped GCS or PMC register, we need it for the 512 * NO_REBOOT flag (TCO v2 and v3). 513 */ 514 if (p->iTCO_version >= 2 && p->iTCO_version < 6 && 515 !pdata->no_reboot_use_pmc) { 516 p->gcs_pmc_res = platform_get_resource(pdev, 517 IORESOURCE_MEM, 518 ICH_RES_MEM_GCS_PMC); 519 p->gcs_pmc = devm_ioremap_resource(dev, p->gcs_pmc_res); 520 if (IS_ERR(p->gcs_pmc)) 521 return PTR_ERR(p->gcs_pmc); 522 } 523 524 /* Check chipset's NO_REBOOT bit */ 525 if (p->update_no_reboot_bit(p->no_reboot_priv, false) && 526 iTCO_vendor_check_noreboot_on()) { 527 pr_info("unable to reset NO_REBOOT flag, device disabled by hardware/BIOS\n"); 528 return -ENODEV; /* Cannot reset NO_REBOOT bit */ 529 } 530 531 if (turn_SMI_watchdog_clear_off >= p->iTCO_version) { 532 /* 533 * Bit 13: TCO_EN -> 0 534 * Disables TCO logic generating an SMI# 535 */ 536 val32 = inl(SMI_EN(p)); 537 val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ 538 outl(val32, SMI_EN(p)); 539 } 540 541 if (!devm_request_region(dev, p->tco_res->start, 542 resource_size(p->tco_res), 543 pdev->name)) { 544 pr_err("I/O address 0x%04llx already in use, device disabled\n", 545 (u64)TCOBASE(p)); 546 return -EBUSY; 547 } 548 549 pr_info("Found a %s TCO device (Version=%d, TCOBASE=0x%04llx)\n", 550 pdata->name, pdata->version, (u64)TCOBASE(p)); 551 552 /* Clear out the (probably old) status */ 553 switch (p->iTCO_version) { 554 case 6: 555 case 5: 556 case 4: 557 outw(0x0008, TCO1_STS(p)); /* Clear the Time Out Status bit */ 558 outw(0x0002, TCO2_STS(p)); /* Clear SECOND_TO_STS bit */ 559 break; 560 case 3: 561 outl(0x20008, TCO1_STS(p)); 562 break; 563 case 2: 564 case 1: 565 default: 566 outw(0x0008, TCO1_STS(p)); /* Clear the Time Out Status bit */ 567 outw(0x0002, TCO2_STS(p)); /* Clear SECOND_TO_STS bit */ 568 outw(0x0004, TCO2_STS(p)); /* Clear BOOT_STS bit */ 569 break; 570 } 571 572 p->wddev.info = &ident, 573 p->wddev.ops = &iTCO_wdt_ops, 574 p->wddev.bootstatus = 0; 575 p->wddev.timeout = WATCHDOG_TIMEOUT; 576 watchdog_set_nowayout(&p->wddev, nowayout); 577 p->wddev.parent = dev; 578 579 watchdog_set_drvdata(&p->wddev, p); 580 platform_set_drvdata(pdev, p); 581 582 if (!iTCO_wdt_set_running(p)) { 583 /* 584 * If the watchdog was not running set NO_REBOOT now to 585 * prevent later reboots. 586 */ 587 p->update_no_reboot_bit(p->no_reboot_priv, true); 588 } 589 590 /* Check that the heartbeat value is within it's range; 591 if not reset to the default */ 592 if (iTCO_wdt_set_timeout(&p->wddev, heartbeat)) { 593 iTCO_wdt_set_timeout(&p->wddev, WATCHDOG_TIMEOUT); 594 pr_info("timeout value out of range, using %d\n", 595 WATCHDOG_TIMEOUT); 596 } 597 598 watchdog_stop_on_reboot(&p->wddev); 599 watchdog_stop_on_unregister(&p->wddev); 600 ret = devm_watchdog_register_device(dev, &p->wddev); 601 if (ret != 0) { 602 pr_err("cannot register watchdog device (err=%d)\n", ret); 603 return ret; 604 } 605 606 pr_info("initialized. heartbeat=%d sec (nowayout=%d)\n", 607 heartbeat, nowayout); 608 609 return 0; 610} 611 612#ifdef CONFIG_PM_SLEEP 613/* 614 * Suspend-to-idle requires this, because it stops the ticks and timekeeping, so 615 * the watchdog cannot be pinged while in that state. In ACPI sleep states the 616 * watchdog is stopped by the platform firmware. 617 */ 618 619#ifdef CONFIG_ACPI 620static inline bool need_suspend(void) 621{ 622 return acpi_target_system_state() == ACPI_STATE_S0; 623} 624#else 625static inline bool need_suspend(void) { return true; } 626#endif 627 628static int iTCO_wdt_suspend_noirq(struct device *dev) 629{ 630 struct iTCO_wdt_private *p = dev_get_drvdata(dev); 631 int ret = 0; 632 633 p->suspended = false; 634 if (watchdog_active(&p->wddev) && need_suspend()) { 635 ret = iTCO_wdt_stop(&p->wddev); 636 if (!ret) 637 p->suspended = true; 638 } 639 return ret; 640} 641 642static int iTCO_wdt_resume_noirq(struct device *dev) 643{ 644 struct iTCO_wdt_private *p = dev_get_drvdata(dev); 645 646 if (p->suspended) 647 iTCO_wdt_start(&p->wddev); 648 649 return 0; 650} 651 652static const struct dev_pm_ops iTCO_wdt_pm = { 653 .suspend_noirq = iTCO_wdt_suspend_noirq, 654 .resume_noirq = iTCO_wdt_resume_noirq, 655}; 656 657#define ITCO_WDT_PM_OPS (&iTCO_wdt_pm) 658#else 659#define ITCO_WDT_PM_OPS NULL 660#endif /* CONFIG_PM_SLEEP */ 661 662static struct platform_driver iTCO_wdt_driver = { 663 .probe = iTCO_wdt_probe, 664 .driver = { 665 .name = DRV_NAME, 666 .pm = ITCO_WDT_PM_OPS, 667 }, 668}; 669 670static int __init iTCO_wdt_init_module(void) 671{ 672 pr_info("Intel TCO WatchDog Timer Driver v%s\n", DRV_VERSION); 673 674 return platform_driver_register(&iTCO_wdt_driver); 675} 676 677static void __exit iTCO_wdt_cleanup_module(void) 678{ 679 platform_driver_unregister(&iTCO_wdt_driver); 680 pr_info("Watchdog Module Unloaded\n"); 681} 682 683module_init(iTCO_wdt_init_module); 684module_exit(iTCO_wdt_cleanup_module); 685 686MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>"); 687MODULE_DESCRIPTION("Intel TCO WatchDog Timer Driver"); 688MODULE_VERSION(DRV_VERSION); 689MODULE_LICENSE("GPL"); 690MODULE_ALIAS("platform:" DRV_NAME); 691