1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * lms283gf05.c -- support for Samsung LMS283GF05 LCD
4 *
5 * Copyright (c) 2009 Marek Vasut <marek.vasut@gmail.com>
6 */
7
8#include <linux/device.h>
9#include <linux/kernel.h>
10#include <linux/delay.h>
11#include <linux/slab.h>
12#include <linux/gpio.h>
13#include <linux/lcd.h>
14
15#include <linux/spi/spi.h>
16#include <linux/spi/lms283gf05.h>
17#include <linux/module.h>
18
19struct lms283gf05_state {
20	struct spi_device	*spi;
21	struct lcd_device	*ld;
22};
23
24struct lms283gf05_seq {
25	unsigned char		reg;
26	unsigned short		value;
27	unsigned char		delay;
28};
29
30/* Magic sequences supplied by manufacturer, for details refer to datasheet */
31static const struct lms283gf05_seq disp_initseq[] = {
32	/* REG, VALUE, DELAY */
33	{ 0x07, 0x0000, 0 },
34	{ 0x13, 0x0000, 10 },
35
36	{ 0x11, 0x3004, 0 },
37	{ 0x14, 0x200F, 0 },
38	{ 0x10, 0x1a20, 0 },
39	{ 0x13, 0x0040, 50 },
40
41	{ 0x13, 0x0060, 0 },
42	{ 0x13, 0x0070, 200 },
43
44	{ 0x01, 0x0127, 0 },
45	{ 0x02,	0x0700, 0 },
46	{ 0x03, 0x1030, 0 },
47	{ 0x08, 0x0208, 0 },
48	{ 0x0B, 0x0620, 0 },
49	{ 0x0C, 0x0110, 0 },
50	{ 0x30, 0x0120, 0 },
51	{ 0x31, 0x0127, 0 },
52	{ 0x32, 0x0000, 0 },
53	{ 0x33, 0x0503, 0 },
54	{ 0x34, 0x0727, 0 },
55	{ 0x35, 0x0124, 0 },
56	{ 0x36, 0x0706, 0 },
57	{ 0x37, 0x0701, 0 },
58	{ 0x38, 0x0F00, 0 },
59	{ 0x39, 0x0F00, 0 },
60	{ 0x40, 0x0000, 0 },
61	{ 0x41, 0x0000, 0 },
62	{ 0x42, 0x013f, 0 },
63	{ 0x43, 0x0000, 0 },
64	{ 0x44, 0x013f, 0 },
65	{ 0x45, 0x0000, 0 },
66	{ 0x46, 0xef00, 0 },
67	{ 0x47, 0x013f, 0 },
68	{ 0x48, 0x0000, 0 },
69	{ 0x07, 0x0015, 30 },
70
71	{ 0x07, 0x0017, 0 },
72
73	{ 0x20, 0x0000, 0 },
74	{ 0x21, 0x0000, 0 },
75	{ 0x22, 0x0000, 0 }
76};
77
78static const struct lms283gf05_seq disp_pdwnseq[] = {
79	{ 0x07, 0x0016, 30 },
80
81	{ 0x07, 0x0004, 0 },
82	{ 0x10, 0x0220, 20 },
83
84	{ 0x13, 0x0060, 50 },
85
86	{ 0x13, 0x0040, 50 },
87
88	{ 0x13, 0x0000, 0 },
89	{ 0x10, 0x0000, 0 }
90};
91
92
93static void lms283gf05_reset(unsigned long gpio, bool inverted)
94{
95	gpio_set_value(gpio, !inverted);
96	mdelay(100);
97	gpio_set_value(gpio, inverted);
98	mdelay(20);
99	gpio_set_value(gpio, !inverted);
100	mdelay(20);
101}
102
103static void lms283gf05_toggle(struct spi_device *spi,
104				const struct lms283gf05_seq *seq, int sz)
105{
106	char buf[3];
107	int i;
108
109	for (i = 0; i < sz; i++) {
110		buf[0] = 0x74;
111		buf[1] = 0x00;
112		buf[2] = seq[i].reg;
113		spi_write(spi, buf, 3);
114
115		buf[0] = 0x76;
116		buf[1] = seq[i].value >> 8;
117		buf[2] = seq[i].value & 0xff;
118		spi_write(spi, buf, 3);
119
120		mdelay(seq[i].delay);
121	}
122}
123
124static int lms283gf05_power_set(struct lcd_device *ld, int power)
125{
126	struct lms283gf05_state *st = lcd_get_data(ld);
127	struct spi_device *spi = st->spi;
128	struct lms283gf05_pdata *pdata = dev_get_platdata(&spi->dev);
129
130	if (power <= FB_BLANK_NORMAL) {
131		if (pdata)
132			lms283gf05_reset(pdata->reset_gpio,
133					pdata->reset_inverted);
134		lms283gf05_toggle(spi, disp_initseq, ARRAY_SIZE(disp_initseq));
135	} else {
136		lms283gf05_toggle(spi, disp_pdwnseq, ARRAY_SIZE(disp_pdwnseq));
137		if (pdata)
138			gpio_set_value(pdata->reset_gpio,
139					pdata->reset_inverted);
140	}
141
142	return 0;
143}
144
145static struct lcd_ops lms_ops = {
146	.set_power	= lms283gf05_power_set,
147	.get_power	= NULL,
148};
149
150static int lms283gf05_probe(struct spi_device *spi)
151{
152	struct lms283gf05_state *st;
153	struct lms283gf05_pdata *pdata = dev_get_platdata(&spi->dev);
154	struct lcd_device *ld;
155	int ret = 0;
156
157	if (pdata != NULL) {
158		ret = devm_gpio_request_one(&spi->dev, pdata->reset_gpio,
159				GPIOF_DIR_OUT | (!pdata->reset_inverted ?
160				GPIOF_INIT_HIGH : GPIOF_INIT_LOW),
161				"LMS283GF05 RESET");
162		if (ret)
163			return ret;
164	}
165
166	st = devm_kzalloc(&spi->dev, sizeof(struct lms283gf05_state),
167				GFP_KERNEL);
168	if (st == NULL)
169		return -ENOMEM;
170
171	ld = devm_lcd_device_register(&spi->dev, "lms283gf05", &spi->dev, st,
172					&lms_ops);
173	if (IS_ERR(ld))
174		return PTR_ERR(ld);
175
176	st->spi = spi;
177	st->ld = ld;
178
179	spi_set_drvdata(spi, st);
180
181	/* kick in the LCD */
182	if (pdata)
183		lms283gf05_reset(pdata->reset_gpio, pdata->reset_inverted);
184	lms283gf05_toggle(spi, disp_initseq, ARRAY_SIZE(disp_initseq));
185
186	return 0;
187}
188
189static struct spi_driver lms283gf05_driver = {
190	.driver = {
191		.name	= "lms283gf05",
192	},
193	.probe		= lms283gf05_probe,
194};
195
196module_spi_driver(lms283gf05_driver);
197
198MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
199MODULE_DESCRIPTION("LCD283GF05 LCD");
200MODULE_LICENSE("GPL v2");
201