1// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) 2/* 3 * hcd.c - DesignWare HS OTG Controller host-mode routines 4 * 5 * Copyright (C) 2004-2013 Synopsys, Inc. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions, and the following disclaimer, 12 * without modification. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 3. The names of the above-listed copyright holders may not be used 17 * to endorse or promote products derived from this software without 18 * specific prior written permission. 19 * 20 * ALTERNATIVELY, this software may be distributed under the terms of the 21 * GNU General Public License ("GPL") as published by the Free Software 22 * Foundation; either version 2 of the License, or (at your option) any 23 * later version. 24 * 25 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS 26 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 27 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 28 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR 29 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 30 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 31 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 32 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 33 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 34 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 35 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 36 */ 37 38/* 39 * This file contains the core HCD code, and implements the Linux hc_driver 40 * API 41 */ 42#include <linux/kernel.h> 43#include <linux/module.h> 44#include <linux/spinlock.h> 45#include <linux/interrupt.h> 46#include <linux/platform_device.h> 47#include <linux/dma-mapping.h> 48#include <linux/delay.h> 49#include <linux/io.h> 50#include <linux/slab.h> 51#include <linux/usb.h> 52 53#include <linux/usb/hcd.h> 54#include <linux/usb/ch11.h> 55 56#include "core.h" 57#include "hcd.h" 58 59static void dwc2_port_resume(struct dwc2_hsotg *hsotg); 60 61/* 62 * ========================================================================= 63 * Host Core Layer Functions 64 * ========================================================================= 65 */ 66 67/** 68 * dwc2_enable_common_interrupts() - Initializes the commmon interrupts, 69 * used in both device and host modes 70 * 71 * @hsotg: Programming view of the DWC_otg controller 72 */ 73static void dwc2_enable_common_interrupts(struct dwc2_hsotg *hsotg) 74{ 75 u32 intmsk; 76 77 /* Clear any pending OTG Interrupts */ 78 dwc2_writel(hsotg, 0xffffffff, GOTGINT); 79 80 /* Clear any pending interrupts */ 81 dwc2_writel(hsotg, 0xffffffff, GINTSTS); 82 83 /* Enable the interrupts in the GINTMSK */ 84 intmsk = GINTSTS_MODEMIS | GINTSTS_OTGINT; 85 86 if (!hsotg->params.host_dma) 87 intmsk |= GINTSTS_RXFLVL; 88 if (!hsotg->params.external_id_pin_ctl) 89 intmsk |= GINTSTS_CONIDSTSCHNG; 90 91 intmsk |= GINTSTS_WKUPINT | GINTSTS_USBSUSP | 92 GINTSTS_SESSREQINT; 93 94 if (dwc2_is_device_mode(hsotg) && hsotg->params.lpm) 95 intmsk |= GINTSTS_LPMTRANRCVD; 96 97 dwc2_writel(hsotg, intmsk, GINTMSK); 98} 99 100static int dwc2_gahbcfg_init(struct dwc2_hsotg *hsotg) 101{ 102 u32 ahbcfg = dwc2_readl(hsotg, GAHBCFG); 103 104 switch (hsotg->hw_params.arch) { 105 case GHWCFG2_EXT_DMA_ARCH: 106 dev_err(hsotg->dev, "External DMA Mode not supported\n"); 107 return -EINVAL; 108 109 case GHWCFG2_INT_DMA_ARCH: 110 dev_dbg(hsotg->dev, "Internal DMA Mode\n"); 111 if (hsotg->params.ahbcfg != -1) { 112 ahbcfg &= GAHBCFG_CTRL_MASK; 113 ahbcfg |= hsotg->params.ahbcfg & 114 ~GAHBCFG_CTRL_MASK; 115 } 116 break; 117 118 case GHWCFG2_SLAVE_ONLY_ARCH: 119 default: 120 dev_dbg(hsotg->dev, "Slave Only Mode\n"); 121 break; 122 } 123 124 if (hsotg->params.host_dma) 125 ahbcfg |= GAHBCFG_DMA_EN; 126 else 127 hsotg->params.dma_desc_enable = false; 128 129 dwc2_writel(hsotg, ahbcfg, GAHBCFG); 130 131 return 0; 132} 133 134static void dwc2_gusbcfg_init(struct dwc2_hsotg *hsotg) 135{ 136 u32 usbcfg; 137 138 usbcfg = dwc2_readl(hsotg, GUSBCFG); 139 usbcfg &= ~(GUSBCFG_HNPCAP | GUSBCFG_SRPCAP); 140 141 switch (hsotg->hw_params.op_mode) { 142 case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE: 143 if (hsotg->params.otg_cap == 144 DWC2_CAP_PARAM_HNP_SRP_CAPABLE) 145 usbcfg |= GUSBCFG_HNPCAP; 146 if (hsotg->params.otg_cap != 147 DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE) 148 usbcfg |= GUSBCFG_SRPCAP; 149 break; 150 151 case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE: 152 case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE: 153 case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST: 154 if (hsotg->params.otg_cap != 155 DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE) 156 usbcfg |= GUSBCFG_SRPCAP; 157 break; 158 159 case GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE: 160 case GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE: 161 case GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST: 162 default: 163 break; 164 } 165 166 dwc2_writel(hsotg, usbcfg, GUSBCFG); 167} 168 169static int dwc2_vbus_supply_init(struct dwc2_hsotg *hsotg) 170{ 171 if (hsotg->vbus_supply) 172 return regulator_enable(hsotg->vbus_supply); 173 174 return 0; 175} 176 177static int dwc2_vbus_supply_exit(struct dwc2_hsotg *hsotg) 178{ 179 if (hsotg->vbus_supply) 180 return regulator_disable(hsotg->vbus_supply); 181 182 return 0; 183} 184 185/** 186 * dwc2_enable_host_interrupts() - Enables the Host mode interrupts 187 * 188 * @hsotg: Programming view of DWC_otg controller 189 */ 190static void dwc2_enable_host_interrupts(struct dwc2_hsotg *hsotg) 191{ 192 u32 intmsk; 193 194 dev_dbg(hsotg->dev, "%s()\n", __func__); 195 196 /* Disable all interrupts */ 197 dwc2_writel(hsotg, 0, GINTMSK); 198 dwc2_writel(hsotg, 0, HAINTMSK); 199 200 /* Enable the common interrupts */ 201 dwc2_enable_common_interrupts(hsotg); 202 203 /* Enable host mode interrupts without disturbing common interrupts */ 204 intmsk = dwc2_readl(hsotg, GINTMSK); 205 intmsk |= GINTSTS_DISCONNINT | GINTSTS_PRTINT | GINTSTS_HCHINT; 206 dwc2_writel(hsotg, intmsk, GINTMSK); 207} 208 209/** 210 * dwc2_disable_host_interrupts() - Disables the Host Mode interrupts 211 * 212 * @hsotg: Programming view of DWC_otg controller 213 */ 214static void dwc2_disable_host_interrupts(struct dwc2_hsotg *hsotg) 215{ 216 u32 intmsk = dwc2_readl(hsotg, GINTMSK); 217 218 /* Disable host mode interrupts without disturbing common interrupts */ 219 intmsk &= ~(GINTSTS_SOF | GINTSTS_PRTINT | GINTSTS_HCHINT | 220 GINTSTS_PTXFEMP | GINTSTS_NPTXFEMP | GINTSTS_DISCONNINT); 221 dwc2_writel(hsotg, intmsk, GINTMSK); 222} 223 224/* 225 * dwc2_calculate_dynamic_fifo() - Calculates the default fifo size 226 * For system that have a total fifo depth that is smaller than the default 227 * RX + TX fifo size. 228 * 229 * @hsotg: Programming view of DWC_otg controller 230 */ 231static void dwc2_calculate_dynamic_fifo(struct dwc2_hsotg *hsotg) 232{ 233 struct dwc2_core_params *params = &hsotg->params; 234 struct dwc2_hw_params *hw = &hsotg->hw_params; 235 u32 rxfsiz, nptxfsiz, ptxfsiz, total_fifo_size; 236 237 total_fifo_size = hw->total_fifo_size; 238 rxfsiz = params->host_rx_fifo_size; 239 nptxfsiz = params->host_nperio_tx_fifo_size; 240 ptxfsiz = params->host_perio_tx_fifo_size; 241 242 /* 243 * Will use Method 2 defined in the DWC2 spec: minimum FIFO depth 244 * allocation with support for high bandwidth endpoints. Synopsys 245 * defines MPS(Max Packet size) for a periodic EP=1024, and for 246 * non-periodic as 512. 247 */ 248 if (total_fifo_size < (rxfsiz + nptxfsiz + ptxfsiz)) { 249 /* 250 * For Buffer DMA mode/Scatter Gather DMA mode 251 * 2 * ((Largest Packet size / 4) + 1 + 1) + n 252 * with n = number of host channel. 253 * 2 * ((1024/4) + 2) = 516 254 */ 255 rxfsiz = 516 + hw->host_channels; 256 257 /* 258 * min non-periodic tx fifo depth 259 * 2 * (largest non-periodic USB packet used / 4) 260 * 2 * (512/4) = 256 261 */ 262 nptxfsiz = 256; 263 264 /* 265 * min periodic tx fifo depth 266 * (largest packet size*MC)/4 267 * (1024 * 3)/4 = 768 268 */ 269 ptxfsiz = 768; 270 271 params->host_rx_fifo_size = rxfsiz; 272 params->host_nperio_tx_fifo_size = nptxfsiz; 273 params->host_perio_tx_fifo_size = ptxfsiz; 274 } 275 276 /* 277 * If the summation of RX, NPTX and PTX fifo sizes is still 278 * bigger than the total_fifo_size, then we have a problem. 279 * 280 * We won't be able to allocate as many endpoints. Right now, 281 * we're just printing an error message, but ideally this FIFO 282 * allocation algorithm would be improved in the future. 283 * 284 * FIXME improve this FIFO allocation algorithm. 285 */ 286 if (unlikely(total_fifo_size < (rxfsiz + nptxfsiz + ptxfsiz))) 287 dev_err(hsotg->dev, "invalid fifo sizes\n"); 288} 289 290static void dwc2_config_fifos(struct dwc2_hsotg *hsotg) 291{ 292 struct dwc2_core_params *params = &hsotg->params; 293 u32 nptxfsiz, hptxfsiz, dfifocfg, grxfsiz; 294 295 if (!params->enable_dynamic_fifo) 296 return; 297 298 dwc2_calculate_dynamic_fifo(hsotg); 299 300 /* Rx FIFO */ 301 grxfsiz = dwc2_readl(hsotg, GRXFSIZ); 302 dev_dbg(hsotg->dev, "initial grxfsiz=%08x\n", grxfsiz); 303 grxfsiz &= ~GRXFSIZ_DEPTH_MASK; 304 grxfsiz |= params->host_rx_fifo_size << 305 GRXFSIZ_DEPTH_SHIFT & GRXFSIZ_DEPTH_MASK; 306 dwc2_writel(hsotg, grxfsiz, GRXFSIZ); 307 dev_dbg(hsotg->dev, "new grxfsiz=%08x\n", 308 dwc2_readl(hsotg, GRXFSIZ)); 309 310 /* Non-periodic Tx FIFO */ 311 dev_dbg(hsotg->dev, "initial gnptxfsiz=%08x\n", 312 dwc2_readl(hsotg, GNPTXFSIZ)); 313 nptxfsiz = params->host_nperio_tx_fifo_size << 314 FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK; 315 nptxfsiz |= params->host_rx_fifo_size << 316 FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK; 317 dwc2_writel(hsotg, nptxfsiz, GNPTXFSIZ); 318 dev_dbg(hsotg->dev, "new gnptxfsiz=%08x\n", 319 dwc2_readl(hsotg, GNPTXFSIZ)); 320 321 /* Periodic Tx FIFO */ 322 dev_dbg(hsotg->dev, "initial hptxfsiz=%08x\n", 323 dwc2_readl(hsotg, HPTXFSIZ)); 324 hptxfsiz = params->host_perio_tx_fifo_size << 325 FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK; 326 hptxfsiz |= (params->host_rx_fifo_size + 327 params->host_nperio_tx_fifo_size) << 328 FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK; 329 dwc2_writel(hsotg, hptxfsiz, HPTXFSIZ); 330 dev_dbg(hsotg->dev, "new hptxfsiz=%08x\n", 331 dwc2_readl(hsotg, HPTXFSIZ)); 332 333 if (hsotg->params.en_multiple_tx_fifo && 334 hsotg->hw_params.snpsid >= DWC2_CORE_REV_2_91a) { 335 /* 336 * This feature was implemented in 2.91a version 337 * Global DFIFOCFG calculation for Host mode - 338 * include RxFIFO, NPTXFIFO and HPTXFIFO 339 */ 340 dfifocfg = dwc2_readl(hsotg, GDFIFOCFG); 341 dfifocfg &= ~GDFIFOCFG_EPINFOBASE_MASK; 342 dfifocfg |= (params->host_rx_fifo_size + 343 params->host_nperio_tx_fifo_size + 344 params->host_perio_tx_fifo_size) << 345 GDFIFOCFG_EPINFOBASE_SHIFT & 346 GDFIFOCFG_EPINFOBASE_MASK; 347 dwc2_writel(hsotg, dfifocfg, GDFIFOCFG); 348 } 349} 350 351/** 352 * dwc2_calc_frame_interval() - Calculates the correct frame Interval value for 353 * the HFIR register according to PHY type and speed 354 * 355 * @hsotg: Programming view of DWC_otg controller 356 * 357 * NOTE: The caller can modify the value of the HFIR register only after the 358 * Port Enable bit of the Host Port Control and Status register (HPRT.EnaPort) 359 * has been set 360 */ 361u32 dwc2_calc_frame_interval(struct dwc2_hsotg *hsotg) 362{ 363 u32 usbcfg; 364 u32 hprt0; 365 int clock = 60; /* default value */ 366 367 usbcfg = dwc2_readl(hsotg, GUSBCFG); 368 hprt0 = dwc2_readl(hsotg, HPRT0); 369 370 if (!(usbcfg & GUSBCFG_PHYSEL) && (usbcfg & GUSBCFG_ULPI_UTMI_SEL) && 371 !(usbcfg & GUSBCFG_PHYIF16)) 372 clock = 60; 373 if ((usbcfg & GUSBCFG_PHYSEL) && hsotg->hw_params.fs_phy_type == 374 GHWCFG2_FS_PHY_TYPE_SHARED_ULPI) 375 clock = 48; 376 if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) && 377 !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && (usbcfg & GUSBCFG_PHYIF16)) 378 clock = 30; 379 if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) && 380 !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && !(usbcfg & GUSBCFG_PHYIF16)) 381 clock = 60; 382 if ((usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) && 383 !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && (usbcfg & GUSBCFG_PHYIF16)) 384 clock = 48; 385 if ((usbcfg & GUSBCFG_PHYSEL) && !(usbcfg & GUSBCFG_PHYIF16) && 386 hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_SHARED_UTMI) 387 clock = 48; 388 if ((usbcfg & GUSBCFG_PHYSEL) && 389 hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED) 390 clock = 48; 391 392 if ((hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT == HPRT0_SPD_HIGH_SPEED) 393 /* High speed case */ 394 return 125 * clock - 1; 395 396 /* FS/LS case */ 397 return 1000 * clock - 1; 398} 399 400/** 401 * dwc2_read_packet() - Reads a packet from the Rx FIFO into the destination 402 * buffer 403 * 404 * @hsotg: Programming view of DWC_otg controller 405 * @dest: Destination buffer for the packet 406 * @bytes: Number of bytes to copy to the destination 407 */ 408void dwc2_read_packet(struct dwc2_hsotg *hsotg, u8 *dest, u16 bytes) 409{ 410 u32 *data_buf = (u32 *)dest; 411 int word_count = (bytes + 3) / 4; 412 int i; 413 414 /* 415 * Todo: Account for the case where dest is not dword aligned. This 416 * requires reading data from the FIFO into a u32 temp buffer, then 417 * moving it into the data buffer. 418 */ 419 420 dev_vdbg(hsotg->dev, "%s(%p,%p,%d)\n", __func__, hsotg, dest, bytes); 421 422 for (i = 0; i < word_count; i++, data_buf++) 423 *data_buf = dwc2_readl(hsotg, HCFIFO(0)); 424} 425 426/** 427 * dwc2_dump_channel_info() - Prints the state of a host channel 428 * 429 * @hsotg: Programming view of DWC_otg controller 430 * @chan: Pointer to the channel to dump 431 * 432 * Must be called with interrupt disabled and spinlock held 433 * 434 * NOTE: This function will be removed once the peripheral controller code 435 * is integrated and the driver is stable 436 */ 437static void dwc2_dump_channel_info(struct dwc2_hsotg *hsotg, 438 struct dwc2_host_chan *chan) 439{ 440#ifdef VERBOSE_DEBUG 441 int num_channels = hsotg->params.host_channels; 442 struct dwc2_qh *qh; 443 u32 hcchar; 444 u32 hcsplt; 445 u32 hctsiz; 446 u32 hc_dma; 447 int i; 448 449 if (!chan) 450 return; 451 452 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num)); 453 hcsplt = dwc2_readl(hsotg, HCSPLT(chan->hc_num)); 454 hctsiz = dwc2_readl(hsotg, HCTSIZ(chan->hc_num)); 455 hc_dma = dwc2_readl(hsotg, HCDMA(chan->hc_num)); 456 457 dev_dbg(hsotg->dev, " Assigned to channel %p:\n", chan); 458 dev_dbg(hsotg->dev, " hcchar 0x%08x, hcsplt 0x%08x\n", 459 hcchar, hcsplt); 460 dev_dbg(hsotg->dev, " hctsiz 0x%08x, hc_dma 0x%08x\n", 461 hctsiz, hc_dma); 462 dev_dbg(hsotg->dev, " dev_addr: %d, ep_num: %d, ep_is_in: %d\n", 463 chan->dev_addr, chan->ep_num, chan->ep_is_in); 464 dev_dbg(hsotg->dev, " ep_type: %d\n", chan->ep_type); 465 dev_dbg(hsotg->dev, " max_packet: %d\n", chan->max_packet); 466 dev_dbg(hsotg->dev, " data_pid_start: %d\n", chan->data_pid_start); 467 dev_dbg(hsotg->dev, " xfer_started: %d\n", chan->xfer_started); 468 dev_dbg(hsotg->dev, " halt_status: %d\n", chan->halt_status); 469 dev_dbg(hsotg->dev, " xfer_buf: %p\n", chan->xfer_buf); 470 dev_dbg(hsotg->dev, " xfer_dma: %08lx\n", 471 (unsigned long)chan->xfer_dma); 472 dev_dbg(hsotg->dev, " xfer_len: %d\n", chan->xfer_len); 473 dev_dbg(hsotg->dev, " qh: %p\n", chan->qh); 474 dev_dbg(hsotg->dev, " NP inactive sched:\n"); 475 list_for_each_entry(qh, &hsotg->non_periodic_sched_inactive, 476 qh_list_entry) 477 dev_dbg(hsotg->dev, " %p\n", qh); 478 dev_dbg(hsotg->dev, " NP waiting sched:\n"); 479 list_for_each_entry(qh, &hsotg->non_periodic_sched_waiting, 480 qh_list_entry) 481 dev_dbg(hsotg->dev, " %p\n", qh); 482 dev_dbg(hsotg->dev, " NP active sched:\n"); 483 list_for_each_entry(qh, &hsotg->non_periodic_sched_active, 484 qh_list_entry) 485 dev_dbg(hsotg->dev, " %p\n", qh); 486 dev_dbg(hsotg->dev, " Channels:\n"); 487 for (i = 0; i < num_channels; i++) { 488 struct dwc2_host_chan *chan = hsotg->hc_ptr_array[i]; 489 490 dev_dbg(hsotg->dev, " %2d: %p\n", i, chan); 491 } 492#endif /* VERBOSE_DEBUG */ 493} 494 495static int _dwc2_hcd_start(struct usb_hcd *hcd); 496 497static void dwc2_host_start(struct dwc2_hsotg *hsotg) 498{ 499 struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg); 500 501 hcd->self.is_b_host = dwc2_hcd_is_b_host(hsotg); 502 _dwc2_hcd_start(hcd); 503} 504 505static void dwc2_host_disconnect(struct dwc2_hsotg *hsotg) 506{ 507 struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg); 508 509 hcd->self.is_b_host = 0; 510} 511 512static void dwc2_host_hub_info(struct dwc2_hsotg *hsotg, void *context, 513 int *hub_addr, int *hub_port) 514{ 515 struct urb *urb = context; 516 517 if (urb->dev->tt) 518 *hub_addr = urb->dev->tt->hub->devnum; 519 else 520 *hub_addr = 0; 521 *hub_port = urb->dev->ttport; 522} 523 524/* 525 * ========================================================================= 526 * Low Level Host Channel Access Functions 527 * ========================================================================= 528 */ 529 530static void dwc2_hc_enable_slave_ints(struct dwc2_hsotg *hsotg, 531 struct dwc2_host_chan *chan) 532{ 533 u32 hcintmsk = HCINTMSK_CHHLTD; 534 535 switch (chan->ep_type) { 536 case USB_ENDPOINT_XFER_CONTROL: 537 case USB_ENDPOINT_XFER_BULK: 538 dev_vdbg(hsotg->dev, "control/bulk\n"); 539 hcintmsk |= HCINTMSK_XFERCOMPL; 540 hcintmsk |= HCINTMSK_STALL; 541 hcintmsk |= HCINTMSK_XACTERR; 542 hcintmsk |= HCINTMSK_DATATGLERR; 543 if (chan->ep_is_in) { 544 hcintmsk |= HCINTMSK_BBLERR; 545 } else { 546 hcintmsk |= HCINTMSK_NAK; 547 hcintmsk |= HCINTMSK_NYET; 548 if (chan->do_ping) 549 hcintmsk |= HCINTMSK_ACK; 550 } 551 552 if (chan->do_split) { 553 hcintmsk |= HCINTMSK_NAK; 554 if (chan->complete_split) 555 hcintmsk |= HCINTMSK_NYET; 556 else 557 hcintmsk |= HCINTMSK_ACK; 558 } 559 560 if (chan->error_state) 561 hcintmsk |= HCINTMSK_ACK; 562 break; 563 564 case USB_ENDPOINT_XFER_INT: 565 if (dbg_perio()) 566 dev_vdbg(hsotg->dev, "intr\n"); 567 hcintmsk |= HCINTMSK_XFERCOMPL; 568 hcintmsk |= HCINTMSK_NAK; 569 hcintmsk |= HCINTMSK_STALL; 570 hcintmsk |= HCINTMSK_XACTERR; 571 hcintmsk |= HCINTMSK_DATATGLERR; 572 hcintmsk |= HCINTMSK_FRMOVRUN; 573 574 if (chan->ep_is_in) 575 hcintmsk |= HCINTMSK_BBLERR; 576 if (chan->error_state) 577 hcintmsk |= HCINTMSK_ACK; 578 if (chan->do_split) { 579 if (chan->complete_split) 580 hcintmsk |= HCINTMSK_NYET; 581 else 582 hcintmsk |= HCINTMSK_ACK; 583 } 584 break; 585 586 case USB_ENDPOINT_XFER_ISOC: 587 if (dbg_perio()) 588 dev_vdbg(hsotg->dev, "isoc\n"); 589 hcintmsk |= HCINTMSK_XFERCOMPL; 590 hcintmsk |= HCINTMSK_FRMOVRUN; 591 hcintmsk |= HCINTMSK_ACK; 592 593 if (chan->ep_is_in) { 594 hcintmsk |= HCINTMSK_XACTERR; 595 hcintmsk |= HCINTMSK_BBLERR; 596 } 597 break; 598 default: 599 dev_err(hsotg->dev, "## Unknown EP type ##\n"); 600 break; 601 } 602 603 dwc2_writel(hsotg, hcintmsk, HCINTMSK(chan->hc_num)); 604 if (dbg_hc(chan)) 605 dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk); 606} 607 608static void dwc2_hc_enable_dma_ints(struct dwc2_hsotg *hsotg, 609 struct dwc2_host_chan *chan) 610{ 611 u32 hcintmsk = HCINTMSK_CHHLTD; 612 613 /* 614 * For Descriptor DMA mode core halts the channel on AHB error. 615 * Interrupt is not required. 616 */ 617 if (!hsotg->params.dma_desc_enable) { 618 if (dbg_hc(chan)) 619 dev_vdbg(hsotg->dev, "desc DMA disabled\n"); 620 hcintmsk |= HCINTMSK_AHBERR; 621 } else { 622 if (dbg_hc(chan)) 623 dev_vdbg(hsotg->dev, "desc DMA enabled\n"); 624 if (chan->ep_type == USB_ENDPOINT_XFER_ISOC) 625 hcintmsk |= HCINTMSK_XFERCOMPL; 626 } 627 628 if (chan->error_state && !chan->do_split && 629 chan->ep_type != USB_ENDPOINT_XFER_ISOC) { 630 if (dbg_hc(chan)) 631 dev_vdbg(hsotg->dev, "setting ACK\n"); 632 hcintmsk |= HCINTMSK_ACK; 633 if (chan->ep_is_in) { 634 hcintmsk |= HCINTMSK_DATATGLERR; 635 if (chan->ep_type != USB_ENDPOINT_XFER_INT) 636 hcintmsk |= HCINTMSK_NAK; 637 } 638 } 639 640 dwc2_writel(hsotg, hcintmsk, HCINTMSK(chan->hc_num)); 641 if (dbg_hc(chan)) 642 dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk); 643} 644 645static void dwc2_hc_enable_ints(struct dwc2_hsotg *hsotg, 646 struct dwc2_host_chan *chan) 647{ 648 u32 intmsk; 649 650 if (hsotg->params.host_dma) { 651 if (dbg_hc(chan)) 652 dev_vdbg(hsotg->dev, "DMA enabled\n"); 653 dwc2_hc_enable_dma_ints(hsotg, chan); 654 } else { 655 if (dbg_hc(chan)) 656 dev_vdbg(hsotg->dev, "DMA disabled\n"); 657 dwc2_hc_enable_slave_ints(hsotg, chan); 658 } 659 660 /* Enable the top level host channel interrupt */ 661 intmsk = dwc2_readl(hsotg, HAINTMSK); 662 intmsk |= 1 << chan->hc_num; 663 dwc2_writel(hsotg, intmsk, HAINTMSK); 664 if (dbg_hc(chan)) 665 dev_vdbg(hsotg->dev, "set HAINTMSK to %08x\n", intmsk); 666 667 /* Make sure host channel interrupts are enabled */ 668 intmsk = dwc2_readl(hsotg, GINTMSK); 669 intmsk |= GINTSTS_HCHINT; 670 dwc2_writel(hsotg, intmsk, GINTMSK); 671 if (dbg_hc(chan)) 672 dev_vdbg(hsotg->dev, "set GINTMSK to %08x\n", intmsk); 673} 674 675/** 676 * dwc2_hc_init() - Prepares a host channel for transferring packets to/from 677 * a specific endpoint 678 * 679 * @hsotg: Programming view of DWC_otg controller 680 * @chan: Information needed to initialize the host channel 681 * 682 * The HCCHARn register is set up with the characteristics specified in chan. 683 * Host channel interrupts that may need to be serviced while this transfer is 684 * in progress are enabled. 685 */ 686static void dwc2_hc_init(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan) 687{ 688 u8 hc_num = chan->hc_num; 689 u32 hcintmsk; 690 u32 hcchar; 691 u32 hcsplt = 0; 692 693 if (dbg_hc(chan)) 694 dev_vdbg(hsotg->dev, "%s()\n", __func__); 695 696 /* Clear old interrupt conditions for this host channel */ 697 hcintmsk = 0xffffffff; 698 hcintmsk &= ~HCINTMSK_RESERVED14_31; 699 dwc2_writel(hsotg, hcintmsk, HCINT(hc_num)); 700 701 /* Enable channel interrupts required for this transfer */ 702 dwc2_hc_enable_ints(hsotg, chan); 703 704 /* 705 * Program the HCCHARn register with the endpoint characteristics for 706 * the current transfer 707 */ 708 hcchar = chan->dev_addr << HCCHAR_DEVADDR_SHIFT & HCCHAR_DEVADDR_MASK; 709 hcchar |= chan->ep_num << HCCHAR_EPNUM_SHIFT & HCCHAR_EPNUM_MASK; 710 if (chan->ep_is_in) 711 hcchar |= HCCHAR_EPDIR; 712 if (chan->speed == USB_SPEED_LOW) 713 hcchar |= HCCHAR_LSPDDEV; 714 hcchar |= chan->ep_type << HCCHAR_EPTYPE_SHIFT & HCCHAR_EPTYPE_MASK; 715 hcchar |= chan->max_packet << HCCHAR_MPS_SHIFT & HCCHAR_MPS_MASK; 716 dwc2_writel(hsotg, hcchar, HCCHAR(hc_num)); 717 if (dbg_hc(chan)) { 718 dev_vdbg(hsotg->dev, "set HCCHAR(%d) to %08x\n", 719 hc_num, hcchar); 720 721 dev_vdbg(hsotg->dev, "%s: Channel %d\n", 722 __func__, hc_num); 723 dev_vdbg(hsotg->dev, " Dev Addr: %d\n", 724 chan->dev_addr); 725 dev_vdbg(hsotg->dev, " Ep Num: %d\n", 726 chan->ep_num); 727 dev_vdbg(hsotg->dev, " Is In: %d\n", 728 chan->ep_is_in); 729 dev_vdbg(hsotg->dev, " Is Low Speed: %d\n", 730 chan->speed == USB_SPEED_LOW); 731 dev_vdbg(hsotg->dev, " Ep Type: %d\n", 732 chan->ep_type); 733 dev_vdbg(hsotg->dev, " Max Pkt: %d\n", 734 chan->max_packet); 735 } 736 737 /* Program the HCSPLT register for SPLITs */ 738 if (chan->do_split) { 739 if (dbg_hc(chan)) 740 dev_vdbg(hsotg->dev, 741 "Programming HC %d with split --> %s\n", 742 hc_num, 743 chan->complete_split ? "CSPLIT" : "SSPLIT"); 744 if (chan->complete_split) 745 hcsplt |= HCSPLT_COMPSPLT; 746 hcsplt |= chan->xact_pos << HCSPLT_XACTPOS_SHIFT & 747 HCSPLT_XACTPOS_MASK; 748 hcsplt |= chan->hub_addr << HCSPLT_HUBADDR_SHIFT & 749 HCSPLT_HUBADDR_MASK; 750 hcsplt |= chan->hub_port << HCSPLT_PRTADDR_SHIFT & 751 HCSPLT_PRTADDR_MASK; 752 if (dbg_hc(chan)) { 753 dev_vdbg(hsotg->dev, " comp split %d\n", 754 chan->complete_split); 755 dev_vdbg(hsotg->dev, " xact pos %d\n", 756 chan->xact_pos); 757 dev_vdbg(hsotg->dev, " hub addr %d\n", 758 chan->hub_addr); 759 dev_vdbg(hsotg->dev, " hub port %d\n", 760 chan->hub_port); 761 dev_vdbg(hsotg->dev, " is_in %d\n", 762 chan->ep_is_in); 763 dev_vdbg(hsotg->dev, " Max Pkt %d\n", 764 chan->max_packet); 765 dev_vdbg(hsotg->dev, " xferlen %d\n", 766 chan->xfer_len); 767 } 768 } 769 770 dwc2_writel(hsotg, hcsplt, HCSPLT(hc_num)); 771} 772 773/** 774 * dwc2_hc_halt() - Attempts to halt a host channel 775 * 776 * @hsotg: Controller register interface 777 * @chan: Host channel to halt 778 * @halt_status: Reason for halting the channel 779 * 780 * This function should only be called in Slave mode or to abort a transfer in 781 * either Slave mode or DMA mode. Under normal circumstances in DMA mode, the 782 * controller halts the channel when the transfer is complete or a condition 783 * occurs that requires application intervention. 784 * 785 * In slave mode, checks for a free request queue entry, then sets the Channel 786 * Enable and Channel Disable bits of the Host Channel Characteristics 787 * register of the specified channel to intiate the halt. If there is no free 788 * request queue entry, sets only the Channel Disable bit of the HCCHARn 789 * register to flush requests for this channel. In the latter case, sets a 790 * flag to indicate that the host channel needs to be halted when a request 791 * queue slot is open. 792 * 793 * In DMA mode, always sets the Channel Enable and Channel Disable bits of the 794 * HCCHARn register. The controller ensures there is space in the request 795 * queue before submitting the halt request. 796 * 797 * Some time may elapse before the core flushes any posted requests for this 798 * host channel and halts. The Channel Halted interrupt handler completes the 799 * deactivation of the host channel. 800 */ 801void dwc2_hc_halt(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan, 802 enum dwc2_halt_status halt_status) 803{ 804 u32 nptxsts, hptxsts, hcchar; 805 806 if (dbg_hc(chan)) 807 dev_vdbg(hsotg->dev, "%s()\n", __func__); 808 809 /* 810 * In buffer DMA or external DMA mode channel can't be halted 811 * for non-split periodic channels. At the end of the next 812 * uframe/frame (in the worst case), the core generates a channel 813 * halted and disables the channel automatically. 814 */ 815 if ((hsotg->params.g_dma && !hsotg->params.g_dma_desc) || 816 hsotg->hw_params.arch == GHWCFG2_EXT_DMA_ARCH) { 817 if (!chan->do_split && 818 (chan->ep_type == USB_ENDPOINT_XFER_ISOC || 819 chan->ep_type == USB_ENDPOINT_XFER_INT)) { 820 dev_err(hsotg->dev, "%s() Channel can't be halted\n", 821 __func__); 822 return; 823 } 824 } 825 826 if (halt_status == DWC2_HC_XFER_NO_HALT_STATUS) 827 dev_err(hsotg->dev, "!!! halt_status = %d !!!\n", halt_status); 828 829 if (halt_status == DWC2_HC_XFER_URB_DEQUEUE || 830 halt_status == DWC2_HC_XFER_AHB_ERR) { 831 /* 832 * Disable all channel interrupts except Ch Halted. The QTD 833 * and QH state associated with this transfer has been cleared 834 * (in the case of URB_DEQUEUE), so the channel needs to be 835 * shut down carefully to prevent crashes. 836 */ 837 u32 hcintmsk = HCINTMSK_CHHLTD; 838 839 dev_vdbg(hsotg->dev, "dequeue/error\n"); 840 dwc2_writel(hsotg, hcintmsk, HCINTMSK(chan->hc_num)); 841 842 /* 843 * Make sure no other interrupts besides halt are currently 844 * pending. Handling another interrupt could cause a crash due 845 * to the QTD and QH state. 846 */ 847 dwc2_writel(hsotg, ~hcintmsk, HCINT(chan->hc_num)); 848 849 /* 850 * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR 851 * even if the channel was already halted for some other 852 * reason 853 */ 854 chan->halt_status = halt_status; 855 856 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num)); 857 if (!(hcchar & HCCHAR_CHENA)) { 858 /* 859 * The channel is either already halted or it hasn't 860 * started yet. In DMA mode, the transfer may halt if 861 * it finishes normally or a condition occurs that 862 * requires driver intervention. Don't want to halt 863 * the channel again. In either Slave or DMA mode, 864 * it's possible that the transfer has been assigned 865 * to a channel, but not started yet when an URB is 866 * dequeued. Don't want to halt a channel that hasn't 867 * started yet. 868 */ 869 return; 870 } 871 } 872 if (chan->halt_pending) { 873 /* 874 * A halt has already been issued for this channel. This might 875 * happen when a transfer is aborted by a higher level in 876 * the stack. 877 */ 878 dev_vdbg(hsotg->dev, 879 "*** %s: Channel %d, chan->halt_pending already set ***\n", 880 __func__, chan->hc_num); 881 return; 882 } 883 884 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num)); 885 886 /* No need to set the bit in DDMA for disabling the channel */ 887 /* TODO check it everywhere channel is disabled */ 888 if (!hsotg->params.dma_desc_enable) { 889 if (dbg_hc(chan)) 890 dev_vdbg(hsotg->dev, "desc DMA disabled\n"); 891 hcchar |= HCCHAR_CHENA; 892 } else { 893 if (dbg_hc(chan)) 894 dev_dbg(hsotg->dev, "desc DMA enabled\n"); 895 } 896 hcchar |= HCCHAR_CHDIS; 897 898 if (!hsotg->params.host_dma) { 899 if (dbg_hc(chan)) 900 dev_vdbg(hsotg->dev, "DMA not enabled\n"); 901 hcchar |= HCCHAR_CHENA; 902 903 /* Check for space in the request queue to issue the halt */ 904 if (chan->ep_type == USB_ENDPOINT_XFER_CONTROL || 905 chan->ep_type == USB_ENDPOINT_XFER_BULK) { 906 dev_vdbg(hsotg->dev, "control/bulk\n"); 907 nptxsts = dwc2_readl(hsotg, GNPTXSTS); 908 if ((nptxsts & TXSTS_QSPCAVAIL_MASK) == 0) { 909 dev_vdbg(hsotg->dev, "Disabling channel\n"); 910 hcchar &= ~HCCHAR_CHENA; 911 } 912 } else { 913 if (dbg_perio()) 914 dev_vdbg(hsotg->dev, "isoc/intr\n"); 915 hptxsts = dwc2_readl(hsotg, HPTXSTS); 916 if ((hptxsts & TXSTS_QSPCAVAIL_MASK) == 0 || 917 hsotg->queuing_high_bandwidth) { 918 if (dbg_perio()) 919 dev_vdbg(hsotg->dev, "Disabling channel\n"); 920 hcchar &= ~HCCHAR_CHENA; 921 } 922 } 923 } else { 924 if (dbg_hc(chan)) 925 dev_vdbg(hsotg->dev, "DMA enabled\n"); 926 } 927 928 dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num)); 929 chan->halt_status = halt_status; 930 931 if (hcchar & HCCHAR_CHENA) { 932 if (dbg_hc(chan)) 933 dev_vdbg(hsotg->dev, "Channel enabled\n"); 934 chan->halt_pending = 1; 935 chan->halt_on_queue = 0; 936 } else { 937 if (dbg_hc(chan)) 938 dev_vdbg(hsotg->dev, "Channel disabled\n"); 939 chan->halt_on_queue = 1; 940 } 941 942 if (dbg_hc(chan)) { 943 dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, 944 chan->hc_num); 945 dev_vdbg(hsotg->dev, " hcchar: 0x%08x\n", 946 hcchar); 947 dev_vdbg(hsotg->dev, " halt_pending: %d\n", 948 chan->halt_pending); 949 dev_vdbg(hsotg->dev, " halt_on_queue: %d\n", 950 chan->halt_on_queue); 951 dev_vdbg(hsotg->dev, " halt_status: %d\n", 952 chan->halt_status); 953 } 954} 955 956/** 957 * dwc2_hc_cleanup() - Clears the transfer state for a host channel 958 * 959 * @hsotg: Programming view of DWC_otg controller 960 * @chan: Identifies the host channel to clean up 961 * 962 * This function is normally called after a transfer is done and the host 963 * channel is being released 964 */ 965void dwc2_hc_cleanup(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan) 966{ 967 u32 hcintmsk; 968 969 chan->xfer_started = 0; 970 971 list_del_init(&chan->split_order_list_entry); 972 973 /* 974 * Clear channel interrupt enables and any unhandled channel interrupt 975 * conditions 976 */ 977 dwc2_writel(hsotg, 0, HCINTMSK(chan->hc_num)); 978 hcintmsk = 0xffffffff; 979 hcintmsk &= ~HCINTMSK_RESERVED14_31; 980 dwc2_writel(hsotg, hcintmsk, HCINT(chan->hc_num)); 981} 982 983/** 984 * dwc2_hc_set_even_odd_frame() - Sets the channel property that indicates in 985 * which frame a periodic transfer should occur 986 * 987 * @hsotg: Programming view of DWC_otg controller 988 * @chan: Identifies the host channel to set up and its properties 989 * @hcchar: Current value of the HCCHAR register for the specified host channel 990 * 991 * This function has no effect on non-periodic transfers 992 */ 993static void dwc2_hc_set_even_odd_frame(struct dwc2_hsotg *hsotg, 994 struct dwc2_host_chan *chan, u32 *hcchar) 995{ 996 if (chan->ep_type == USB_ENDPOINT_XFER_INT || 997 chan->ep_type == USB_ENDPOINT_XFER_ISOC) { 998 int host_speed; 999 int xfer_ns; 1000 int xfer_us; 1001 int bytes_in_fifo; 1002 u16 fifo_space; 1003 u16 frame_number; 1004 u16 wire_frame; 1005 1006 /* 1007 * Try to figure out if we're an even or odd frame. If we set 1008 * even and the current frame number is even the the transfer 1009 * will happen immediately. Similar if both are odd. If one is 1010 * even and the other is odd then the transfer will happen when 1011 * the frame number ticks. 1012 * 1013 * There's a bit of a balancing act to get this right. 1014 * Sometimes we may want to send data in the current frame (AK 1015 * right away). We might want to do this if the frame number 1016 * _just_ ticked, but we might also want to do this in order 1017 * to continue a split transaction that happened late in a 1018 * microframe (so we didn't know to queue the next transfer 1019 * until the frame number had ticked). The problem is that we 1020 * need a lot of knowledge to know if there's actually still 1021 * time to send things or if it would be better to wait until 1022 * the next frame. 1023 * 1024 * We can look at how much time is left in the current frame 1025 * and make a guess about whether we'll have time to transfer. 1026 * We'll do that. 1027 */ 1028 1029 /* Get speed host is running at */ 1030 host_speed = (chan->speed != USB_SPEED_HIGH && 1031 !chan->do_split) ? chan->speed : USB_SPEED_HIGH; 1032 1033 /* See how many bytes are in the periodic FIFO right now */ 1034 fifo_space = (dwc2_readl(hsotg, HPTXSTS) & 1035 TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT; 1036 bytes_in_fifo = sizeof(u32) * 1037 (hsotg->params.host_perio_tx_fifo_size - 1038 fifo_space); 1039 1040 /* 1041 * Roughly estimate bus time for everything in the periodic 1042 * queue + our new transfer. This is "rough" because we're 1043 * using a function that makes takes into account IN/OUT 1044 * and INT/ISO and we're just slamming in one value for all 1045 * transfers. This should be an over-estimate and that should 1046 * be OK, but we can probably tighten it. 1047 */ 1048 xfer_ns = usb_calc_bus_time(host_speed, false, false, 1049 chan->xfer_len + bytes_in_fifo); 1050 xfer_us = NS_TO_US(xfer_ns); 1051 1052 /* See what frame number we'll be at by the time we finish */ 1053 frame_number = dwc2_hcd_get_future_frame_number(hsotg, xfer_us); 1054 1055 /* This is when we were scheduled to be on the wire */ 1056 wire_frame = dwc2_frame_num_inc(chan->qh->next_active_frame, 1); 1057 1058 /* 1059 * If we'd finish _after_ the frame we're scheduled in then 1060 * it's hopeless. Just schedule right away and hope for the 1061 * best. Note that it _might_ be wise to call back into the 1062 * scheduler to pick a better frame, but this is better than 1063 * nothing. 1064 */ 1065 if (dwc2_frame_num_gt(frame_number, wire_frame)) { 1066 dwc2_sch_vdbg(hsotg, 1067 "QH=%p EO MISS fr=%04x=>%04x (%+d)\n", 1068 chan->qh, wire_frame, frame_number, 1069 dwc2_frame_num_dec(frame_number, 1070 wire_frame)); 1071 wire_frame = frame_number; 1072 1073 /* 1074 * We picked a different frame number; communicate this 1075 * back to the scheduler so it doesn't try to schedule 1076 * another in the same frame. 1077 * 1078 * Remember that next_active_frame is 1 before the wire 1079 * frame. 1080 */ 1081 chan->qh->next_active_frame = 1082 dwc2_frame_num_dec(frame_number, 1); 1083 } 1084 1085 if (wire_frame & 1) 1086 *hcchar |= HCCHAR_ODDFRM; 1087 else 1088 *hcchar &= ~HCCHAR_ODDFRM; 1089 } 1090} 1091 1092static void dwc2_set_pid_isoc(struct dwc2_host_chan *chan) 1093{ 1094 /* Set up the initial PID for the transfer */ 1095 if (chan->speed == USB_SPEED_HIGH) { 1096 if (chan->ep_is_in) { 1097 if (chan->multi_count == 1) 1098 chan->data_pid_start = DWC2_HC_PID_DATA0; 1099 else if (chan->multi_count == 2) 1100 chan->data_pid_start = DWC2_HC_PID_DATA1; 1101 else 1102 chan->data_pid_start = DWC2_HC_PID_DATA2; 1103 } else { 1104 if (chan->multi_count == 1) 1105 chan->data_pid_start = DWC2_HC_PID_DATA0; 1106 else 1107 chan->data_pid_start = DWC2_HC_PID_MDATA; 1108 } 1109 } else { 1110 chan->data_pid_start = DWC2_HC_PID_DATA0; 1111 } 1112} 1113 1114/** 1115 * dwc2_hc_write_packet() - Writes a packet into the Tx FIFO associated with 1116 * the Host Channel 1117 * 1118 * @hsotg: Programming view of DWC_otg controller 1119 * @chan: Information needed to initialize the host channel 1120 * 1121 * This function should only be called in Slave mode. For a channel associated 1122 * with a non-periodic EP, the non-periodic Tx FIFO is written. For a channel 1123 * associated with a periodic EP, the periodic Tx FIFO is written. 1124 * 1125 * Upon return the xfer_buf and xfer_count fields in chan are incremented by 1126 * the number of bytes written to the Tx FIFO. 1127 */ 1128static void dwc2_hc_write_packet(struct dwc2_hsotg *hsotg, 1129 struct dwc2_host_chan *chan) 1130{ 1131 u32 i; 1132 u32 remaining_count; 1133 u32 byte_count; 1134 u32 dword_count; 1135 u32 *data_buf = (u32 *)chan->xfer_buf; 1136 1137 if (dbg_hc(chan)) 1138 dev_vdbg(hsotg->dev, "%s()\n", __func__); 1139 1140 remaining_count = chan->xfer_len - chan->xfer_count; 1141 if (remaining_count > chan->max_packet) 1142 byte_count = chan->max_packet; 1143 else 1144 byte_count = remaining_count; 1145 1146 dword_count = (byte_count + 3) / 4; 1147 1148 if (((unsigned long)data_buf & 0x3) == 0) { 1149 /* xfer_buf is DWORD aligned */ 1150 for (i = 0; i < dword_count; i++, data_buf++) 1151 dwc2_writel(hsotg, *data_buf, HCFIFO(chan->hc_num)); 1152 } else { 1153 /* xfer_buf is not DWORD aligned */ 1154 for (i = 0; i < dword_count; i++, data_buf++) { 1155 u32 data = data_buf[0] | data_buf[1] << 8 | 1156 data_buf[2] << 16 | data_buf[3] << 24; 1157 dwc2_writel(hsotg, data, HCFIFO(chan->hc_num)); 1158 } 1159 } 1160 1161 chan->xfer_count += byte_count; 1162 chan->xfer_buf += byte_count; 1163} 1164 1165/** 1166 * dwc2_hc_do_ping() - Starts a PING transfer 1167 * 1168 * @hsotg: Programming view of DWC_otg controller 1169 * @chan: Information needed to initialize the host channel 1170 * 1171 * This function should only be called in Slave mode. The Do Ping bit is set in 1172 * the HCTSIZ register, then the channel is enabled. 1173 */ 1174static void dwc2_hc_do_ping(struct dwc2_hsotg *hsotg, 1175 struct dwc2_host_chan *chan) 1176{ 1177 u32 hcchar; 1178 u32 hctsiz; 1179 1180 if (dbg_hc(chan)) 1181 dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, 1182 chan->hc_num); 1183 1184 hctsiz = TSIZ_DOPNG; 1185 hctsiz |= 1 << TSIZ_PKTCNT_SHIFT; 1186 dwc2_writel(hsotg, hctsiz, HCTSIZ(chan->hc_num)); 1187 1188 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num)); 1189 hcchar |= HCCHAR_CHENA; 1190 hcchar &= ~HCCHAR_CHDIS; 1191 dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num)); 1192} 1193 1194/** 1195 * dwc2_hc_start_transfer() - Does the setup for a data transfer for a host 1196 * channel and starts the transfer 1197 * 1198 * @hsotg: Programming view of DWC_otg controller 1199 * @chan: Information needed to initialize the host channel. The xfer_len value 1200 * may be reduced to accommodate the max widths of the XferSize and 1201 * PktCnt fields in the HCTSIZn register. The multi_count value may be 1202 * changed to reflect the final xfer_len value. 1203 * 1204 * This function may be called in either Slave mode or DMA mode. In Slave mode, 1205 * the caller must ensure that there is sufficient space in the request queue 1206 * and Tx Data FIFO. 1207 * 1208 * For an OUT transfer in Slave mode, it loads a data packet into the 1209 * appropriate FIFO. If necessary, additional data packets are loaded in the 1210 * Host ISR. 1211 * 1212 * For an IN transfer in Slave mode, a data packet is requested. The data 1213 * packets are unloaded from the Rx FIFO in the Host ISR. If necessary, 1214 * additional data packets are requested in the Host ISR. 1215 * 1216 * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ 1217 * register along with a packet count of 1 and the channel is enabled. This 1218 * causes a single PING transaction to occur. Other fields in HCTSIZ are 1219 * simply set to 0 since no data transfer occurs in this case. 1220 * 1221 * For a PING transfer in DMA mode, the HCTSIZ register is initialized with 1222 * all the information required to perform the subsequent data transfer. In 1223 * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the 1224 * controller performs the entire PING protocol, then starts the data 1225 * transfer. 1226 */ 1227static void dwc2_hc_start_transfer(struct dwc2_hsotg *hsotg, 1228 struct dwc2_host_chan *chan) 1229{ 1230 u32 max_hc_xfer_size = hsotg->params.max_transfer_size; 1231 u16 max_hc_pkt_count = hsotg->params.max_packet_count; 1232 u32 hcchar; 1233 u32 hctsiz = 0; 1234 u16 num_packets; 1235 u32 ec_mc; 1236 1237 if (dbg_hc(chan)) 1238 dev_vdbg(hsotg->dev, "%s()\n", __func__); 1239 1240 if (chan->do_ping) { 1241 if (!hsotg->params.host_dma) { 1242 if (dbg_hc(chan)) 1243 dev_vdbg(hsotg->dev, "ping, no DMA\n"); 1244 dwc2_hc_do_ping(hsotg, chan); 1245 chan->xfer_started = 1; 1246 return; 1247 } 1248 1249 if (dbg_hc(chan)) 1250 dev_vdbg(hsotg->dev, "ping, DMA\n"); 1251 1252 hctsiz |= TSIZ_DOPNG; 1253 } 1254 1255 if (chan->do_split) { 1256 if (dbg_hc(chan)) 1257 dev_vdbg(hsotg->dev, "split\n"); 1258 num_packets = 1; 1259 1260 if (chan->complete_split && !chan->ep_is_in) 1261 /* 1262 * For CSPLIT OUT Transfer, set the size to 0 so the 1263 * core doesn't expect any data written to the FIFO 1264 */ 1265 chan->xfer_len = 0; 1266 else if (chan->ep_is_in || chan->xfer_len > chan->max_packet) 1267 chan->xfer_len = chan->max_packet; 1268 else if (!chan->ep_is_in && chan->xfer_len > 188) 1269 chan->xfer_len = 188; 1270 1271 hctsiz |= chan->xfer_len << TSIZ_XFERSIZE_SHIFT & 1272 TSIZ_XFERSIZE_MASK; 1273 1274 /* For split set ec_mc for immediate retries */ 1275 if (chan->ep_type == USB_ENDPOINT_XFER_INT || 1276 chan->ep_type == USB_ENDPOINT_XFER_ISOC) 1277 ec_mc = 3; 1278 else 1279 ec_mc = 1; 1280 } else { 1281 if (dbg_hc(chan)) 1282 dev_vdbg(hsotg->dev, "no split\n"); 1283 /* 1284 * Ensure that the transfer length and packet count will fit 1285 * in the widths allocated for them in the HCTSIZn register 1286 */ 1287 if (chan->ep_type == USB_ENDPOINT_XFER_INT || 1288 chan->ep_type == USB_ENDPOINT_XFER_ISOC) { 1289 /* 1290 * Make sure the transfer size is no larger than one 1291 * (micro)frame's worth of data. (A check was done 1292 * when the periodic transfer was accepted to ensure 1293 * that a (micro)frame's worth of data can be 1294 * programmed into a channel.) 1295 */ 1296 u32 max_periodic_len = 1297 chan->multi_count * chan->max_packet; 1298 1299 if (chan->xfer_len > max_periodic_len) 1300 chan->xfer_len = max_periodic_len; 1301 } else if (chan->xfer_len > max_hc_xfer_size) { 1302 /* 1303 * Make sure that xfer_len is a multiple of max packet 1304 * size 1305 */ 1306 chan->xfer_len = 1307 max_hc_xfer_size - chan->max_packet + 1; 1308 } 1309 1310 if (chan->xfer_len > 0) { 1311 num_packets = (chan->xfer_len + chan->max_packet - 1) / 1312 chan->max_packet; 1313 if (num_packets > max_hc_pkt_count) { 1314 num_packets = max_hc_pkt_count; 1315 chan->xfer_len = num_packets * chan->max_packet; 1316 } else if (chan->ep_is_in) { 1317 /* 1318 * Always program an integral # of max packets 1319 * for IN transfers. 1320 * Note: This assumes that the input buffer is 1321 * aligned and sized accordingly. 1322 */ 1323 chan->xfer_len = num_packets * chan->max_packet; 1324 } 1325 } else { 1326 /* Need 1 packet for transfer length of 0 */ 1327 num_packets = 1; 1328 } 1329 1330 if (chan->ep_type == USB_ENDPOINT_XFER_INT || 1331 chan->ep_type == USB_ENDPOINT_XFER_ISOC) 1332 /* 1333 * Make sure that the multi_count field matches the 1334 * actual transfer length 1335 */ 1336 chan->multi_count = num_packets; 1337 1338 if (chan->ep_type == USB_ENDPOINT_XFER_ISOC) 1339 dwc2_set_pid_isoc(chan); 1340 1341 hctsiz |= chan->xfer_len << TSIZ_XFERSIZE_SHIFT & 1342 TSIZ_XFERSIZE_MASK; 1343 1344 /* The ec_mc gets the multi_count for non-split */ 1345 ec_mc = chan->multi_count; 1346 } 1347 1348 chan->start_pkt_count = num_packets; 1349 hctsiz |= num_packets << TSIZ_PKTCNT_SHIFT & TSIZ_PKTCNT_MASK; 1350 hctsiz |= chan->data_pid_start << TSIZ_SC_MC_PID_SHIFT & 1351 TSIZ_SC_MC_PID_MASK; 1352 dwc2_writel(hsotg, hctsiz, HCTSIZ(chan->hc_num)); 1353 if (dbg_hc(chan)) { 1354 dev_vdbg(hsotg->dev, "Wrote %08x to HCTSIZ(%d)\n", 1355 hctsiz, chan->hc_num); 1356 1357 dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, 1358 chan->hc_num); 1359 dev_vdbg(hsotg->dev, " Xfer Size: %d\n", 1360 (hctsiz & TSIZ_XFERSIZE_MASK) >> 1361 TSIZ_XFERSIZE_SHIFT); 1362 dev_vdbg(hsotg->dev, " Num Pkts: %d\n", 1363 (hctsiz & TSIZ_PKTCNT_MASK) >> 1364 TSIZ_PKTCNT_SHIFT); 1365 dev_vdbg(hsotg->dev, " Start PID: %d\n", 1366 (hctsiz & TSIZ_SC_MC_PID_MASK) >> 1367 TSIZ_SC_MC_PID_SHIFT); 1368 } 1369 1370 if (hsotg->params.host_dma) { 1371 dma_addr_t dma_addr; 1372 1373 if (chan->align_buf) { 1374 if (dbg_hc(chan)) 1375 dev_vdbg(hsotg->dev, "align_buf\n"); 1376 dma_addr = chan->align_buf; 1377 } else { 1378 dma_addr = chan->xfer_dma; 1379 } 1380 dwc2_writel(hsotg, (u32)dma_addr, HCDMA(chan->hc_num)); 1381 1382 if (dbg_hc(chan)) 1383 dev_vdbg(hsotg->dev, "Wrote %08lx to HCDMA(%d)\n", 1384 (unsigned long)dma_addr, chan->hc_num); 1385 } 1386 1387 /* Start the split */ 1388 if (chan->do_split) { 1389 u32 hcsplt = dwc2_readl(hsotg, HCSPLT(chan->hc_num)); 1390 1391 hcsplt |= HCSPLT_SPLTENA; 1392 dwc2_writel(hsotg, hcsplt, HCSPLT(chan->hc_num)); 1393 } 1394 1395 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num)); 1396 hcchar &= ~HCCHAR_MULTICNT_MASK; 1397 hcchar |= (ec_mc << HCCHAR_MULTICNT_SHIFT) & HCCHAR_MULTICNT_MASK; 1398 dwc2_hc_set_even_odd_frame(hsotg, chan, &hcchar); 1399 1400 if (hcchar & HCCHAR_CHDIS) 1401 dev_warn(hsotg->dev, 1402 "%s: chdis set, channel %d, hcchar 0x%08x\n", 1403 __func__, chan->hc_num, hcchar); 1404 1405 /* Set host channel enable after all other setup is complete */ 1406 hcchar |= HCCHAR_CHENA; 1407 hcchar &= ~HCCHAR_CHDIS; 1408 1409 if (dbg_hc(chan)) 1410 dev_vdbg(hsotg->dev, " Multi Cnt: %d\n", 1411 (hcchar & HCCHAR_MULTICNT_MASK) >> 1412 HCCHAR_MULTICNT_SHIFT); 1413 1414 dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num)); 1415 if (dbg_hc(chan)) 1416 dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar, 1417 chan->hc_num); 1418 1419 chan->xfer_started = 1; 1420 chan->requests++; 1421 1422 if (!hsotg->params.host_dma && 1423 !chan->ep_is_in && chan->xfer_len > 0) 1424 /* Load OUT packet into the appropriate Tx FIFO */ 1425 dwc2_hc_write_packet(hsotg, chan); 1426} 1427 1428/** 1429 * dwc2_hc_start_transfer_ddma() - Does the setup for a data transfer for a 1430 * host channel and starts the transfer in Descriptor DMA mode 1431 * 1432 * @hsotg: Programming view of DWC_otg controller 1433 * @chan: Information needed to initialize the host channel 1434 * 1435 * Initializes HCTSIZ register. For a PING transfer the Do Ping bit is set. 1436 * Sets PID and NTD values. For periodic transfers initializes SCHED_INFO field 1437 * with micro-frame bitmap. 1438 * 1439 * Initializes HCDMA register with descriptor list address and CTD value then 1440 * starts the transfer via enabling the channel. 1441 */ 1442void dwc2_hc_start_transfer_ddma(struct dwc2_hsotg *hsotg, 1443 struct dwc2_host_chan *chan) 1444{ 1445 u32 hcchar; 1446 u32 hctsiz = 0; 1447 1448 if (chan->do_ping) 1449 hctsiz |= TSIZ_DOPNG; 1450 1451 if (chan->ep_type == USB_ENDPOINT_XFER_ISOC) 1452 dwc2_set_pid_isoc(chan); 1453 1454 /* Packet Count and Xfer Size are not used in Descriptor DMA mode */ 1455 hctsiz |= chan->data_pid_start << TSIZ_SC_MC_PID_SHIFT & 1456 TSIZ_SC_MC_PID_MASK; 1457 1458 /* 0 - 1 descriptor, 1 - 2 descriptors, etc */ 1459 hctsiz |= (chan->ntd - 1) << TSIZ_NTD_SHIFT & TSIZ_NTD_MASK; 1460 1461 /* Non-zero only for high-speed interrupt endpoints */ 1462 hctsiz |= chan->schinfo << TSIZ_SCHINFO_SHIFT & TSIZ_SCHINFO_MASK; 1463 1464 if (dbg_hc(chan)) { 1465 dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, 1466 chan->hc_num); 1467 dev_vdbg(hsotg->dev, " Start PID: %d\n", 1468 chan->data_pid_start); 1469 dev_vdbg(hsotg->dev, " NTD: %d\n", chan->ntd - 1); 1470 } 1471 1472 dwc2_writel(hsotg, hctsiz, HCTSIZ(chan->hc_num)); 1473 1474 dma_sync_single_for_device(hsotg->dev, chan->desc_list_addr, 1475 chan->desc_list_sz, DMA_TO_DEVICE); 1476 1477 dwc2_writel(hsotg, chan->desc_list_addr, HCDMA(chan->hc_num)); 1478 1479 if (dbg_hc(chan)) 1480 dev_vdbg(hsotg->dev, "Wrote %pad to HCDMA(%d)\n", 1481 &chan->desc_list_addr, chan->hc_num); 1482 1483 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num)); 1484 hcchar &= ~HCCHAR_MULTICNT_MASK; 1485 hcchar |= chan->multi_count << HCCHAR_MULTICNT_SHIFT & 1486 HCCHAR_MULTICNT_MASK; 1487 1488 if (hcchar & HCCHAR_CHDIS) 1489 dev_warn(hsotg->dev, 1490 "%s: chdis set, channel %d, hcchar 0x%08x\n", 1491 __func__, chan->hc_num, hcchar); 1492 1493 /* Set host channel enable after all other setup is complete */ 1494 hcchar |= HCCHAR_CHENA; 1495 hcchar &= ~HCCHAR_CHDIS; 1496 1497 if (dbg_hc(chan)) 1498 dev_vdbg(hsotg->dev, " Multi Cnt: %d\n", 1499 (hcchar & HCCHAR_MULTICNT_MASK) >> 1500 HCCHAR_MULTICNT_SHIFT); 1501 1502 dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num)); 1503 if (dbg_hc(chan)) 1504 dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar, 1505 chan->hc_num); 1506 1507 chan->xfer_started = 1; 1508 chan->requests++; 1509} 1510 1511/** 1512 * dwc2_hc_continue_transfer() - Continues a data transfer that was started by 1513 * a previous call to dwc2_hc_start_transfer() 1514 * 1515 * @hsotg: Programming view of DWC_otg controller 1516 * @chan: Information needed to initialize the host channel 1517 * 1518 * The caller must ensure there is sufficient space in the request queue and Tx 1519 * Data FIFO. This function should only be called in Slave mode. In DMA mode, 1520 * the controller acts autonomously to complete transfers programmed to a host 1521 * channel. 1522 * 1523 * For an OUT transfer, a new data packet is loaded into the appropriate FIFO 1524 * if there is any data remaining to be queued. For an IN transfer, another 1525 * data packet is always requested. For the SETUP phase of a control transfer, 1526 * this function does nothing. 1527 * 1528 * Return: 1 if a new request is queued, 0 if no more requests are required 1529 * for this transfer 1530 */ 1531static int dwc2_hc_continue_transfer(struct dwc2_hsotg *hsotg, 1532 struct dwc2_host_chan *chan) 1533{ 1534 if (dbg_hc(chan)) 1535 dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, 1536 chan->hc_num); 1537 1538 if (chan->do_split) 1539 /* SPLITs always queue just once per channel */ 1540 return 0; 1541 1542 if (chan->data_pid_start == DWC2_HC_PID_SETUP) 1543 /* SETUPs are queued only once since they can't be NAK'd */ 1544 return 0; 1545 1546 if (chan->ep_is_in) { 1547 /* 1548 * Always queue another request for other IN transfers. If 1549 * back-to-back INs are issued and NAKs are received for both, 1550 * the driver may still be processing the first NAK when the 1551 * second NAK is received. When the interrupt handler clears 1552 * the NAK interrupt for the first NAK, the second NAK will 1553 * not be seen. So we can't depend on the NAK interrupt 1554 * handler to requeue a NAK'd request. Instead, IN requests 1555 * are issued each time this function is called. When the 1556 * transfer completes, the extra requests for the channel will 1557 * be flushed. 1558 */ 1559 u32 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num)); 1560 1561 dwc2_hc_set_even_odd_frame(hsotg, chan, &hcchar); 1562 hcchar |= HCCHAR_CHENA; 1563 hcchar &= ~HCCHAR_CHDIS; 1564 if (dbg_hc(chan)) 1565 dev_vdbg(hsotg->dev, " IN xfer: hcchar = 0x%08x\n", 1566 hcchar); 1567 dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num)); 1568 chan->requests++; 1569 return 1; 1570 } 1571 1572 /* OUT transfers */ 1573 1574 if (chan->xfer_count < chan->xfer_len) { 1575 if (chan->ep_type == USB_ENDPOINT_XFER_INT || 1576 chan->ep_type == USB_ENDPOINT_XFER_ISOC) { 1577 u32 hcchar = dwc2_readl(hsotg, 1578 HCCHAR(chan->hc_num)); 1579 1580 dwc2_hc_set_even_odd_frame(hsotg, chan, 1581 &hcchar); 1582 } 1583 1584 /* Load OUT packet into the appropriate Tx FIFO */ 1585 dwc2_hc_write_packet(hsotg, chan); 1586 chan->requests++; 1587 return 1; 1588 } 1589 1590 return 0; 1591} 1592 1593/* 1594 * ========================================================================= 1595 * HCD 1596 * ========================================================================= 1597 */ 1598 1599/* 1600 * Processes all the URBs in a single list of QHs. Completes them with 1601 * -ETIMEDOUT and frees the QTD. 1602 * 1603 * Must be called with interrupt disabled and spinlock held 1604 */ 1605static void dwc2_kill_urbs_in_qh_list(struct dwc2_hsotg *hsotg, 1606 struct list_head *qh_list) 1607{ 1608 struct dwc2_qh *qh, *qh_tmp; 1609 struct dwc2_qtd *qtd, *qtd_tmp; 1610 1611 list_for_each_entry_safe(qh, qh_tmp, qh_list, qh_list_entry) { 1612 list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list, 1613 qtd_list_entry) { 1614 dwc2_host_complete(hsotg, qtd, -ECONNRESET); 1615 dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh); 1616 } 1617 } 1618} 1619 1620static void dwc2_qh_list_free(struct dwc2_hsotg *hsotg, 1621 struct list_head *qh_list) 1622{ 1623 struct dwc2_qtd *qtd, *qtd_tmp; 1624 struct dwc2_qh *qh, *qh_tmp; 1625 unsigned long flags; 1626 1627 if (!qh_list->next) 1628 /* The list hasn't been initialized yet */ 1629 return; 1630 1631 spin_lock_irqsave(&hsotg->lock, flags); 1632 1633 /* Ensure there are no QTDs or URBs left */ 1634 dwc2_kill_urbs_in_qh_list(hsotg, qh_list); 1635 1636 list_for_each_entry_safe(qh, qh_tmp, qh_list, qh_list_entry) { 1637 dwc2_hcd_qh_unlink(hsotg, qh); 1638 1639 /* Free each QTD in the QH's QTD list */ 1640 list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list, 1641 qtd_list_entry) 1642 dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh); 1643 1644 if (qh->channel && qh->channel->qh == qh) 1645 qh->channel->qh = NULL; 1646 1647 spin_unlock_irqrestore(&hsotg->lock, flags); 1648 dwc2_hcd_qh_free(hsotg, qh); 1649 spin_lock_irqsave(&hsotg->lock, flags); 1650 } 1651 1652 spin_unlock_irqrestore(&hsotg->lock, flags); 1653} 1654 1655/* 1656 * Responds with an error status of -ETIMEDOUT to all URBs in the non-periodic 1657 * and periodic schedules. The QTD associated with each URB is removed from 1658 * the schedule and freed. This function may be called when a disconnect is 1659 * detected or when the HCD is being stopped. 1660 * 1661 * Must be called with interrupt disabled and spinlock held 1662 */ 1663static void dwc2_kill_all_urbs(struct dwc2_hsotg *hsotg) 1664{ 1665 dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_inactive); 1666 dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_waiting); 1667 dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_active); 1668 dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_inactive); 1669 dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_ready); 1670 dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_assigned); 1671 dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_queued); 1672} 1673 1674/** 1675 * dwc2_hcd_start() - Starts the HCD when switching to Host mode 1676 * 1677 * @hsotg: Pointer to struct dwc2_hsotg 1678 */ 1679void dwc2_hcd_start(struct dwc2_hsotg *hsotg) 1680{ 1681 u32 hprt0; 1682 1683 if (hsotg->op_state == OTG_STATE_B_HOST) { 1684 /* 1685 * Reset the port. During a HNP mode switch the reset 1686 * needs to occur within 1ms and have a duration of at 1687 * least 50ms. 1688 */ 1689 hprt0 = dwc2_read_hprt0(hsotg); 1690 hprt0 |= HPRT0_RST; 1691 dwc2_writel(hsotg, hprt0, HPRT0); 1692 } 1693 1694 queue_delayed_work(hsotg->wq_otg, &hsotg->start_work, 1695 msecs_to_jiffies(50)); 1696} 1697 1698/* Must be called with interrupt disabled and spinlock held */ 1699static void dwc2_hcd_cleanup_channels(struct dwc2_hsotg *hsotg) 1700{ 1701 int num_channels = hsotg->params.host_channels; 1702 struct dwc2_host_chan *channel; 1703 u32 hcchar; 1704 int i; 1705 1706 if (!hsotg->params.host_dma) { 1707 /* Flush out any channel requests in slave mode */ 1708 for (i = 0; i < num_channels; i++) { 1709 channel = hsotg->hc_ptr_array[i]; 1710 if (!list_empty(&channel->hc_list_entry)) 1711 continue; 1712 hcchar = dwc2_readl(hsotg, HCCHAR(i)); 1713 if (hcchar & HCCHAR_CHENA) { 1714 hcchar &= ~(HCCHAR_CHENA | HCCHAR_EPDIR); 1715 hcchar |= HCCHAR_CHDIS; 1716 dwc2_writel(hsotg, hcchar, HCCHAR(i)); 1717 } 1718 } 1719 } 1720 1721 for (i = 0; i < num_channels; i++) { 1722 channel = hsotg->hc_ptr_array[i]; 1723 if (!list_empty(&channel->hc_list_entry)) 1724 continue; 1725 hcchar = dwc2_readl(hsotg, HCCHAR(i)); 1726 if (hcchar & HCCHAR_CHENA) { 1727 /* Halt the channel */ 1728 hcchar |= HCCHAR_CHDIS; 1729 dwc2_writel(hsotg, hcchar, HCCHAR(i)); 1730 } 1731 1732 dwc2_hc_cleanup(hsotg, channel); 1733 list_add_tail(&channel->hc_list_entry, &hsotg->free_hc_list); 1734 /* 1735 * Added for Descriptor DMA to prevent channel double cleanup in 1736 * release_channel_ddma(), which is called from ep_disable when 1737 * device disconnects 1738 */ 1739 channel->qh = NULL; 1740 } 1741 /* All channels have been freed, mark them available */ 1742 if (hsotg->params.uframe_sched) { 1743 hsotg->available_host_channels = 1744 hsotg->params.host_channels; 1745 } else { 1746 hsotg->non_periodic_channels = 0; 1747 hsotg->periodic_channels = 0; 1748 } 1749} 1750 1751/** 1752 * dwc2_hcd_connect() - Handles connect of the HCD 1753 * 1754 * @hsotg: Pointer to struct dwc2_hsotg 1755 * 1756 * Must be called with interrupt disabled and spinlock held 1757 */ 1758void dwc2_hcd_connect(struct dwc2_hsotg *hsotg) 1759{ 1760 if (hsotg->lx_state != DWC2_L0) 1761 usb_hcd_resume_root_hub(hsotg->priv); 1762 1763 hsotg->flags.b.port_connect_status_change = 1; 1764 hsotg->flags.b.port_connect_status = 1; 1765} 1766 1767/** 1768 * dwc2_hcd_disconnect() - Handles disconnect of the HCD 1769 * 1770 * @hsotg: Pointer to struct dwc2_hsotg 1771 * @force: If true, we won't try to reconnect even if we see device connected. 1772 * 1773 * Must be called with interrupt disabled and spinlock held 1774 */ 1775void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg, bool force) 1776{ 1777 u32 intr; 1778 u32 hprt0; 1779 1780 /* Set status flags for the hub driver */ 1781 hsotg->flags.b.port_connect_status_change = 1; 1782 hsotg->flags.b.port_connect_status = 0; 1783 1784 /* 1785 * Shutdown any transfers in process by clearing the Tx FIFO Empty 1786 * interrupt mask and status bits and disabling subsequent host 1787 * channel interrupts. 1788 */ 1789 intr = dwc2_readl(hsotg, GINTMSK); 1790 intr &= ~(GINTSTS_NPTXFEMP | GINTSTS_PTXFEMP | GINTSTS_HCHINT); 1791 dwc2_writel(hsotg, intr, GINTMSK); 1792 intr = GINTSTS_NPTXFEMP | GINTSTS_PTXFEMP | GINTSTS_HCHINT; 1793 dwc2_writel(hsotg, intr, GINTSTS); 1794 1795 /* 1796 * Turn off the vbus power only if the core has transitioned to device 1797 * mode. If still in host mode, need to keep power on to detect a 1798 * reconnection. 1799 */ 1800 if (dwc2_is_device_mode(hsotg)) { 1801 if (hsotg->op_state != OTG_STATE_A_SUSPEND) { 1802 dev_dbg(hsotg->dev, "Disconnect: PortPower off\n"); 1803 dwc2_writel(hsotg, 0, HPRT0); 1804 } 1805 1806 dwc2_disable_host_interrupts(hsotg); 1807 } 1808 1809 /* Respond with an error status to all URBs in the schedule */ 1810 dwc2_kill_all_urbs(hsotg); 1811 1812 if (dwc2_is_host_mode(hsotg)) 1813 /* Clean up any host channels that were in use */ 1814 dwc2_hcd_cleanup_channels(hsotg); 1815 1816 dwc2_host_disconnect(hsotg); 1817 1818 /* 1819 * Add an extra check here to see if we're actually connected but 1820 * we don't have a detection interrupt pending. This can happen if: 1821 * 1. hardware sees connect 1822 * 2. hardware sees disconnect 1823 * 3. hardware sees connect 1824 * 4. dwc2_port_intr() - clears connect interrupt 1825 * 5. dwc2_handle_common_intr() - calls here 1826 * 1827 * Without the extra check here we will end calling disconnect 1828 * and won't get any future interrupts to handle the connect. 1829 */ 1830 if (!force) { 1831 hprt0 = dwc2_readl(hsotg, HPRT0); 1832 if (!(hprt0 & HPRT0_CONNDET) && (hprt0 & HPRT0_CONNSTS)) 1833 dwc2_hcd_connect(hsotg); 1834 } 1835} 1836 1837/** 1838 * dwc2_hcd_rem_wakeup() - Handles Remote Wakeup 1839 * 1840 * @hsotg: Pointer to struct dwc2_hsotg 1841 */ 1842static void dwc2_hcd_rem_wakeup(struct dwc2_hsotg *hsotg) 1843{ 1844 if (hsotg->bus_suspended) { 1845 hsotg->flags.b.port_suspend_change = 1; 1846 usb_hcd_resume_root_hub(hsotg->priv); 1847 } 1848 1849 if (hsotg->lx_state == DWC2_L1) 1850 hsotg->flags.b.port_l1_change = 1; 1851} 1852 1853/** 1854 * dwc2_hcd_stop() - Halts the DWC_otg host mode operations in a clean manner 1855 * 1856 * @hsotg: Pointer to struct dwc2_hsotg 1857 * 1858 * Must be called with interrupt disabled and spinlock held 1859 */ 1860void dwc2_hcd_stop(struct dwc2_hsotg *hsotg) 1861{ 1862 dev_dbg(hsotg->dev, "DWC OTG HCD STOP\n"); 1863 1864 /* 1865 * The root hub should be disconnected before this function is called. 1866 * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue) 1867 * and the QH lists (via ..._hcd_endpoint_disable). 1868 */ 1869 1870 /* Turn off all host-specific interrupts */ 1871 dwc2_disable_host_interrupts(hsotg); 1872 1873 /* Turn off the vbus power */ 1874 dev_dbg(hsotg->dev, "PortPower off\n"); 1875 dwc2_writel(hsotg, 0, HPRT0); 1876} 1877 1878/* Caller must hold driver lock */ 1879static int dwc2_hcd_urb_enqueue(struct dwc2_hsotg *hsotg, 1880 struct dwc2_hcd_urb *urb, struct dwc2_qh *qh, 1881 struct dwc2_qtd *qtd) 1882{ 1883 u32 intr_mask; 1884 int retval; 1885 int dev_speed; 1886 1887 if (!hsotg->flags.b.port_connect_status) { 1888 /* No longer connected */ 1889 dev_err(hsotg->dev, "Not connected\n"); 1890 return -ENODEV; 1891 } 1892 1893 dev_speed = dwc2_host_get_speed(hsotg, urb->priv); 1894 1895 /* Some configurations cannot support LS traffic on a FS root port */ 1896 if ((dev_speed == USB_SPEED_LOW) && 1897 (hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED) && 1898 (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI)) { 1899 u32 hprt0 = dwc2_readl(hsotg, HPRT0); 1900 u32 prtspd = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT; 1901 1902 if (prtspd == HPRT0_SPD_FULL_SPEED) 1903 return -ENODEV; 1904 } 1905 1906 if (!qtd) 1907 return -EINVAL; 1908 1909 dwc2_hcd_qtd_init(qtd, urb); 1910 retval = dwc2_hcd_qtd_add(hsotg, qtd, qh); 1911 if (retval) { 1912 dev_err(hsotg->dev, 1913 "DWC OTG HCD URB Enqueue failed adding QTD. Error status %d\n", 1914 retval); 1915 return retval; 1916 } 1917 1918 intr_mask = dwc2_readl(hsotg, GINTMSK); 1919 if (!(intr_mask & GINTSTS_SOF)) { 1920 enum dwc2_transaction_type tr_type; 1921 1922 if (qtd->qh->ep_type == USB_ENDPOINT_XFER_BULK && 1923 !(qtd->urb->flags & URB_GIVEBACK_ASAP)) 1924 /* 1925 * Do not schedule SG transactions until qtd has 1926 * URB_GIVEBACK_ASAP set 1927 */ 1928 return 0; 1929 1930 tr_type = dwc2_hcd_select_transactions(hsotg); 1931 if (tr_type != DWC2_TRANSACTION_NONE) 1932 dwc2_hcd_queue_transactions(hsotg, tr_type); 1933 } 1934 1935 return 0; 1936} 1937 1938/* Must be called with interrupt disabled and spinlock held */ 1939static int dwc2_hcd_urb_dequeue(struct dwc2_hsotg *hsotg, 1940 struct dwc2_hcd_urb *urb) 1941{ 1942 struct dwc2_qh *qh; 1943 struct dwc2_qtd *urb_qtd; 1944 1945 urb_qtd = urb->qtd; 1946 if (!urb_qtd) { 1947 dev_dbg(hsotg->dev, "## Urb QTD is NULL ##\n"); 1948 return -EINVAL; 1949 } 1950 1951 qh = urb_qtd->qh; 1952 if (!qh) { 1953 dev_dbg(hsotg->dev, "## Urb QTD QH is NULL ##\n"); 1954 return -EINVAL; 1955 } 1956 1957 urb->priv = NULL; 1958 1959 if (urb_qtd->in_process && qh->channel) { 1960 dwc2_dump_channel_info(hsotg, qh->channel); 1961 1962 /* The QTD is in process (it has been assigned to a channel) */ 1963 if (hsotg->flags.b.port_connect_status) 1964 /* 1965 * If still connected (i.e. in host mode), halt the 1966 * channel so it can be used for other transfers. If 1967 * no longer connected, the host registers can't be 1968 * written to halt the channel since the core is in 1969 * device mode. 1970 */ 1971 dwc2_hc_halt(hsotg, qh->channel, 1972 DWC2_HC_XFER_URB_DEQUEUE); 1973 } 1974 1975 /* 1976 * Free the QTD and clean up the associated QH. Leave the QH in the 1977 * schedule if it has any remaining QTDs. 1978 */ 1979 if (!hsotg->params.dma_desc_enable) { 1980 u8 in_process = urb_qtd->in_process; 1981 1982 dwc2_hcd_qtd_unlink_and_free(hsotg, urb_qtd, qh); 1983 if (in_process) { 1984 dwc2_hcd_qh_deactivate(hsotg, qh, 0); 1985 qh->channel = NULL; 1986 } else if (list_empty(&qh->qtd_list)) { 1987 dwc2_hcd_qh_unlink(hsotg, qh); 1988 } 1989 } else { 1990 dwc2_hcd_qtd_unlink_and_free(hsotg, urb_qtd, qh); 1991 } 1992 1993 return 0; 1994} 1995 1996/* Must NOT be called with interrupt disabled or spinlock held */ 1997static int dwc2_hcd_endpoint_disable(struct dwc2_hsotg *hsotg, 1998 struct usb_host_endpoint *ep, int retry) 1999{ 2000 struct dwc2_qtd *qtd, *qtd_tmp; 2001 struct dwc2_qh *qh; 2002 unsigned long flags; 2003 int rc; 2004 2005 spin_lock_irqsave(&hsotg->lock, flags); 2006 2007 qh = ep->hcpriv; 2008 if (!qh) { 2009 rc = -EINVAL; 2010 goto err; 2011 } 2012 2013 while (!list_empty(&qh->qtd_list) && retry--) { 2014 if (retry == 0) { 2015 dev_err(hsotg->dev, 2016 "## timeout in dwc2_hcd_endpoint_disable() ##\n"); 2017 rc = -EBUSY; 2018 goto err; 2019 } 2020 2021 spin_unlock_irqrestore(&hsotg->lock, flags); 2022 msleep(20); 2023 spin_lock_irqsave(&hsotg->lock, flags); 2024 qh = ep->hcpriv; 2025 if (!qh) { 2026 rc = -EINVAL; 2027 goto err; 2028 } 2029 } 2030 2031 dwc2_hcd_qh_unlink(hsotg, qh); 2032 2033 /* Free each QTD in the QH's QTD list */ 2034 list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry) 2035 dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh); 2036 2037 ep->hcpriv = NULL; 2038 2039 if (qh->channel && qh->channel->qh == qh) 2040 qh->channel->qh = NULL; 2041 2042 spin_unlock_irqrestore(&hsotg->lock, flags); 2043 2044 dwc2_hcd_qh_free(hsotg, qh); 2045 2046 return 0; 2047 2048err: 2049 ep->hcpriv = NULL; 2050 spin_unlock_irqrestore(&hsotg->lock, flags); 2051 2052 return rc; 2053} 2054 2055/* Must be called with interrupt disabled and spinlock held */ 2056static int dwc2_hcd_endpoint_reset(struct dwc2_hsotg *hsotg, 2057 struct usb_host_endpoint *ep) 2058{ 2059 struct dwc2_qh *qh = ep->hcpriv; 2060 2061 if (!qh) 2062 return -EINVAL; 2063 2064 qh->data_toggle = DWC2_HC_PID_DATA0; 2065 2066 return 0; 2067} 2068 2069/** 2070 * dwc2_core_init() - Initializes the DWC_otg controller registers and 2071 * prepares the core for device mode or host mode operation 2072 * 2073 * @hsotg: Programming view of the DWC_otg controller 2074 * @initial_setup: If true then this is the first init for this instance. 2075 */ 2076int dwc2_core_init(struct dwc2_hsotg *hsotg, bool initial_setup) 2077{ 2078 u32 usbcfg, otgctl; 2079 int retval; 2080 2081 dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg); 2082 2083 usbcfg = dwc2_readl(hsotg, GUSBCFG); 2084 2085 /* Set ULPI External VBUS bit if needed */ 2086 usbcfg &= ~GUSBCFG_ULPI_EXT_VBUS_DRV; 2087 if (hsotg->params.phy_ulpi_ext_vbus) 2088 usbcfg |= GUSBCFG_ULPI_EXT_VBUS_DRV; 2089 2090 /* Set external TS Dline pulsing bit if needed */ 2091 usbcfg &= ~GUSBCFG_TERMSELDLPULSE; 2092 if (hsotg->params.ts_dline) 2093 usbcfg |= GUSBCFG_TERMSELDLPULSE; 2094 2095 dwc2_writel(hsotg, usbcfg, GUSBCFG); 2096 2097 /* 2098 * Reset the Controller 2099 * 2100 * We only need to reset the controller if this is a re-init. 2101 * For the first init we know for sure that earlier code reset us (it 2102 * needed to in order to properly detect various parameters). 2103 */ 2104 if (!initial_setup) { 2105 retval = dwc2_core_reset(hsotg, false); 2106 if (retval) { 2107 dev_err(hsotg->dev, "%s(): Reset failed, aborting\n", 2108 __func__); 2109 return retval; 2110 } 2111 } 2112 2113 /* 2114 * This needs to happen in FS mode before any other programming occurs 2115 */ 2116 retval = dwc2_phy_init(hsotg, initial_setup); 2117 if (retval) 2118 return retval; 2119 2120 /* Program the GAHBCFG Register */ 2121 retval = dwc2_gahbcfg_init(hsotg); 2122 if (retval) 2123 return retval; 2124 2125 /* Program the GUSBCFG register */ 2126 dwc2_gusbcfg_init(hsotg); 2127 2128 /* Program the GOTGCTL register */ 2129 otgctl = dwc2_readl(hsotg, GOTGCTL); 2130 otgctl &= ~GOTGCTL_OTGVER; 2131 dwc2_writel(hsotg, otgctl, GOTGCTL); 2132 2133 /* Clear the SRP success bit for FS-I2c */ 2134 hsotg->srp_success = 0; 2135 2136 /* Enable common interrupts */ 2137 dwc2_enable_common_interrupts(hsotg); 2138 2139 /* 2140 * Do device or host initialization based on mode during PCD and 2141 * HCD initialization 2142 */ 2143 if (dwc2_is_host_mode(hsotg)) { 2144 dev_dbg(hsotg->dev, "Host Mode\n"); 2145 hsotg->op_state = OTG_STATE_A_HOST; 2146 } else { 2147 dev_dbg(hsotg->dev, "Device Mode\n"); 2148 hsotg->op_state = OTG_STATE_B_PERIPHERAL; 2149 } 2150 2151 return 0; 2152} 2153 2154/** 2155 * dwc2_core_host_init() - Initializes the DWC_otg controller registers for 2156 * Host mode 2157 * 2158 * @hsotg: Programming view of DWC_otg controller 2159 * 2160 * This function flushes the Tx and Rx FIFOs and flushes any entries in the 2161 * request queues. Host channels are reset to ensure that they are ready for 2162 * performing transfers. 2163 */ 2164static void dwc2_core_host_init(struct dwc2_hsotg *hsotg) 2165{ 2166 u32 hcfg, hfir, otgctl, usbcfg; 2167 2168 dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg); 2169 2170 /* Set HS/FS Timeout Calibration to 7 (max available value). 2171 * The number of PHY clocks that the application programs in 2172 * this field is added to the high/full speed interpacket timeout 2173 * duration in the core to account for any additional delays 2174 * introduced by the PHY. This can be required, because the delay 2175 * introduced by the PHY in generating the linestate condition 2176 * can vary from one PHY to another. 2177 */ 2178 usbcfg = dwc2_readl(hsotg, GUSBCFG); 2179 usbcfg |= GUSBCFG_TOUTCAL(7); 2180 dwc2_writel(hsotg, usbcfg, GUSBCFG); 2181 2182 /* Restart the Phy Clock */ 2183 dwc2_writel(hsotg, 0, PCGCTL); 2184 2185 /* Initialize Host Configuration Register */ 2186 dwc2_init_fs_ls_pclk_sel(hsotg); 2187 if (hsotg->params.speed == DWC2_SPEED_PARAM_FULL || 2188 hsotg->params.speed == DWC2_SPEED_PARAM_LOW) { 2189 hcfg = dwc2_readl(hsotg, HCFG); 2190 hcfg |= HCFG_FSLSSUPP; 2191 dwc2_writel(hsotg, hcfg, HCFG); 2192 } 2193 2194 /* 2195 * This bit allows dynamic reloading of the HFIR register during 2196 * runtime. This bit needs to be programmed during initial configuration 2197 * and its value must not be changed during runtime. 2198 */ 2199 if (hsotg->params.reload_ctl) { 2200 hfir = dwc2_readl(hsotg, HFIR); 2201 hfir |= HFIR_RLDCTRL; 2202 dwc2_writel(hsotg, hfir, HFIR); 2203 } 2204 2205 if (hsotg->params.dma_desc_enable) { 2206 u32 op_mode = hsotg->hw_params.op_mode; 2207 2208 if (hsotg->hw_params.snpsid < DWC2_CORE_REV_2_90a || 2209 !hsotg->hw_params.dma_desc_enable || 2210 op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE || 2211 op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE || 2212 op_mode == GHWCFG2_OP_MODE_UNDEFINED) { 2213 dev_err(hsotg->dev, 2214 "Hardware does not support descriptor DMA mode -\n"); 2215 dev_err(hsotg->dev, 2216 "falling back to buffer DMA mode.\n"); 2217 hsotg->params.dma_desc_enable = false; 2218 } else { 2219 hcfg = dwc2_readl(hsotg, HCFG); 2220 hcfg |= HCFG_DESCDMA; 2221 dwc2_writel(hsotg, hcfg, HCFG); 2222 } 2223 } 2224 2225 /* Configure data FIFO sizes */ 2226 dwc2_config_fifos(hsotg); 2227 2228 /* TODO - check this */ 2229 /* Clear Host Set HNP Enable in the OTG Control Register */ 2230 otgctl = dwc2_readl(hsotg, GOTGCTL); 2231 otgctl &= ~GOTGCTL_HSTSETHNPEN; 2232 dwc2_writel(hsotg, otgctl, GOTGCTL); 2233 2234 /* Make sure the FIFOs are flushed */ 2235 dwc2_flush_tx_fifo(hsotg, 0x10 /* all TX FIFOs */); 2236 dwc2_flush_rx_fifo(hsotg); 2237 2238 /* Clear Host Set HNP Enable in the OTG Control Register */ 2239 otgctl = dwc2_readl(hsotg, GOTGCTL); 2240 otgctl &= ~GOTGCTL_HSTSETHNPEN; 2241 dwc2_writel(hsotg, otgctl, GOTGCTL); 2242 2243 if (!hsotg->params.dma_desc_enable) { 2244 int num_channels, i; 2245 u32 hcchar; 2246 2247 /* Flush out any leftover queued requests */ 2248 num_channels = hsotg->params.host_channels; 2249 for (i = 0; i < num_channels; i++) { 2250 hcchar = dwc2_readl(hsotg, HCCHAR(i)); 2251 if (hcchar & HCCHAR_CHENA) { 2252 hcchar &= ~HCCHAR_CHENA; 2253 hcchar |= HCCHAR_CHDIS; 2254 hcchar &= ~HCCHAR_EPDIR; 2255 dwc2_writel(hsotg, hcchar, HCCHAR(i)); 2256 } 2257 } 2258 2259 /* Halt all channels to put them into a known state */ 2260 for (i = 0; i < num_channels; i++) { 2261 hcchar = dwc2_readl(hsotg, HCCHAR(i)); 2262 if (hcchar & HCCHAR_CHENA) { 2263 hcchar |= HCCHAR_CHENA | HCCHAR_CHDIS; 2264 hcchar &= ~HCCHAR_EPDIR; 2265 dwc2_writel(hsotg, hcchar, HCCHAR(i)); 2266 dev_dbg(hsotg->dev, "%s: Halt channel %d\n", 2267 __func__, i); 2268 2269 if (dwc2_hsotg_wait_bit_clear(hsotg, HCCHAR(i), 2270 HCCHAR_CHENA, 2271 1000)) { 2272 dev_warn(hsotg->dev, 2273 "Unable to clear enable on channel %d\n", 2274 i); 2275 } 2276 } 2277 } 2278 } 2279 2280 /* Enable ACG feature in host mode, if supported */ 2281 dwc2_enable_acg(hsotg); 2282 2283 /* Turn on the vbus power */ 2284 dev_dbg(hsotg->dev, "Init: Port Power? op_state=%d\n", hsotg->op_state); 2285 if (hsotg->op_state == OTG_STATE_A_HOST) { 2286 u32 hprt0 = dwc2_read_hprt0(hsotg); 2287 2288 dev_dbg(hsotg->dev, "Init: Power Port (%d)\n", 2289 !!(hprt0 & HPRT0_PWR)); 2290 if (!(hprt0 & HPRT0_PWR)) { 2291 hprt0 |= HPRT0_PWR; 2292 dwc2_writel(hsotg, hprt0, HPRT0); 2293 } 2294 } 2295 2296 dwc2_enable_host_interrupts(hsotg); 2297} 2298 2299/* 2300 * Initializes dynamic portions of the DWC_otg HCD state 2301 * 2302 * Must be called with interrupt disabled and spinlock held 2303 */ 2304static void dwc2_hcd_reinit(struct dwc2_hsotg *hsotg) 2305{ 2306 struct dwc2_host_chan *chan, *chan_tmp; 2307 int num_channels; 2308 int i; 2309 2310 hsotg->flags.d32 = 0; 2311 hsotg->non_periodic_qh_ptr = &hsotg->non_periodic_sched_active; 2312 2313 if (hsotg->params.uframe_sched) { 2314 hsotg->available_host_channels = 2315 hsotg->params.host_channels; 2316 } else { 2317 hsotg->non_periodic_channels = 0; 2318 hsotg->periodic_channels = 0; 2319 } 2320 2321 /* 2322 * Put all channels in the free channel list and clean up channel 2323 * states 2324 */ 2325 list_for_each_entry_safe(chan, chan_tmp, &hsotg->free_hc_list, 2326 hc_list_entry) 2327 list_del_init(&chan->hc_list_entry); 2328 2329 num_channels = hsotg->params.host_channels; 2330 for (i = 0; i < num_channels; i++) { 2331 chan = hsotg->hc_ptr_array[i]; 2332 list_add_tail(&chan->hc_list_entry, &hsotg->free_hc_list); 2333 dwc2_hc_cleanup(hsotg, chan); 2334 } 2335 2336 /* Initialize the DWC core for host mode operation */ 2337 dwc2_core_host_init(hsotg); 2338} 2339 2340static void dwc2_hc_init_split(struct dwc2_hsotg *hsotg, 2341 struct dwc2_host_chan *chan, 2342 struct dwc2_qtd *qtd, struct dwc2_hcd_urb *urb) 2343{ 2344 int hub_addr, hub_port; 2345 2346 chan->do_split = 1; 2347 chan->xact_pos = qtd->isoc_split_pos; 2348 chan->complete_split = qtd->complete_split; 2349 dwc2_host_hub_info(hsotg, urb->priv, &hub_addr, &hub_port); 2350 chan->hub_addr = (u8)hub_addr; 2351 chan->hub_port = (u8)hub_port; 2352} 2353 2354static void dwc2_hc_init_xfer(struct dwc2_hsotg *hsotg, 2355 struct dwc2_host_chan *chan, 2356 struct dwc2_qtd *qtd) 2357{ 2358 struct dwc2_hcd_urb *urb = qtd->urb; 2359 struct dwc2_hcd_iso_packet_desc *frame_desc; 2360 2361 switch (dwc2_hcd_get_pipe_type(&urb->pipe_info)) { 2362 case USB_ENDPOINT_XFER_CONTROL: 2363 chan->ep_type = USB_ENDPOINT_XFER_CONTROL; 2364 2365 switch (qtd->control_phase) { 2366 case DWC2_CONTROL_SETUP: 2367 dev_vdbg(hsotg->dev, " Control setup transaction\n"); 2368 chan->do_ping = 0; 2369 chan->ep_is_in = 0; 2370 chan->data_pid_start = DWC2_HC_PID_SETUP; 2371 if (hsotg->params.host_dma) 2372 chan->xfer_dma = urb->setup_dma; 2373 else 2374 chan->xfer_buf = urb->setup_packet; 2375 chan->xfer_len = 8; 2376 break; 2377 2378 case DWC2_CONTROL_DATA: 2379 dev_vdbg(hsotg->dev, " Control data transaction\n"); 2380 chan->data_pid_start = qtd->data_toggle; 2381 break; 2382 2383 case DWC2_CONTROL_STATUS: 2384 /* 2385 * Direction is opposite of data direction or IN if no 2386 * data 2387 */ 2388 dev_vdbg(hsotg->dev, " Control status transaction\n"); 2389 if (urb->length == 0) 2390 chan->ep_is_in = 1; 2391 else 2392 chan->ep_is_in = 2393 dwc2_hcd_is_pipe_out(&urb->pipe_info); 2394 if (chan->ep_is_in) 2395 chan->do_ping = 0; 2396 chan->data_pid_start = DWC2_HC_PID_DATA1; 2397 chan->xfer_len = 0; 2398 if (hsotg->params.host_dma) 2399 chan->xfer_dma = hsotg->status_buf_dma; 2400 else 2401 chan->xfer_buf = hsotg->status_buf; 2402 break; 2403 } 2404 break; 2405 2406 case USB_ENDPOINT_XFER_BULK: 2407 chan->ep_type = USB_ENDPOINT_XFER_BULK; 2408 break; 2409 2410 case USB_ENDPOINT_XFER_INT: 2411 chan->ep_type = USB_ENDPOINT_XFER_INT; 2412 break; 2413 2414 case USB_ENDPOINT_XFER_ISOC: 2415 chan->ep_type = USB_ENDPOINT_XFER_ISOC; 2416 if (hsotg->params.dma_desc_enable) 2417 break; 2418 2419 frame_desc = &urb->iso_descs[qtd->isoc_frame_index]; 2420 frame_desc->status = 0; 2421 2422 if (hsotg->params.host_dma) { 2423 chan->xfer_dma = urb->dma; 2424 chan->xfer_dma += frame_desc->offset + 2425 qtd->isoc_split_offset; 2426 } else { 2427 chan->xfer_buf = urb->buf; 2428 chan->xfer_buf += frame_desc->offset + 2429 qtd->isoc_split_offset; 2430 } 2431 2432 chan->xfer_len = frame_desc->length - qtd->isoc_split_offset; 2433 2434 if (chan->xact_pos == DWC2_HCSPLT_XACTPOS_ALL) { 2435 if (chan->xfer_len <= 188) 2436 chan->xact_pos = DWC2_HCSPLT_XACTPOS_ALL; 2437 else 2438 chan->xact_pos = DWC2_HCSPLT_XACTPOS_BEGIN; 2439 } 2440 break; 2441 } 2442} 2443 2444static int dwc2_alloc_split_dma_aligned_buf(struct dwc2_hsotg *hsotg, 2445 struct dwc2_qh *qh, 2446 struct dwc2_host_chan *chan) 2447{ 2448 if (!hsotg->unaligned_cache || 2449 chan->max_packet > DWC2_KMEM_UNALIGNED_BUF_SIZE) 2450 return -ENOMEM; 2451 2452 if (!qh->dw_align_buf) { 2453 qh->dw_align_buf = kmem_cache_alloc(hsotg->unaligned_cache, 2454 GFP_ATOMIC | GFP_DMA); 2455 if (!qh->dw_align_buf) 2456 return -ENOMEM; 2457 } 2458 2459 qh->dw_align_buf_dma = dma_map_single(hsotg->dev, qh->dw_align_buf, 2460 DWC2_KMEM_UNALIGNED_BUF_SIZE, 2461 DMA_FROM_DEVICE); 2462 2463 if (dma_mapping_error(hsotg->dev, qh->dw_align_buf_dma)) { 2464 dev_err(hsotg->dev, "can't map align_buf\n"); 2465 chan->align_buf = 0; 2466 return -EINVAL; 2467 } 2468 2469 chan->align_buf = qh->dw_align_buf_dma; 2470 return 0; 2471} 2472 2473#define DWC2_USB_DMA_ALIGN 4 2474 2475static void dwc2_free_dma_aligned_buffer(struct urb *urb) 2476{ 2477 void *stored_xfer_buffer; 2478 size_t length; 2479 2480 if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER)) 2481 return; 2482 2483 /* Restore urb->transfer_buffer from the end of the allocated area */ 2484 memcpy(&stored_xfer_buffer, 2485 PTR_ALIGN(urb->transfer_buffer + urb->transfer_buffer_length, 2486 dma_get_cache_alignment()), 2487 sizeof(urb->transfer_buffer)); 2488 2489 if (usb_urb_dir_in(urb)) { 2490 if (usb_pipeisoc(urb->pipe)) 2491 length = urb->transfer_buffer_length; 2492 else 2493 length = urb->actual_length; 2494 2495 memcpy(stored_xfer_buffer, urb->transfer_buffer, length); 2496 } 2497 kfree(urb->transfer_buffer); 2498 urb->transfer_buffer = stored_xfer_buffer; 2499 2500 urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER; 2501} 2502 2503static int dwc2_alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags) 2504{ 2505 void *kmalloc_ptr; 2506 size_t kmalloc_size; 2507 2508 if (urb->num_sgs || urb->sg || 2509 urb->transfer_buffer_length == 0 || 2510 !((uintptr_t)urb->transfer_buffer & (DWC2_USB_DMA_ALIGN - 1))) 2511 return 0; 2512 2513 /* 2514 * Allocate a buffer with enough padding for original transfer_buffer 2515 * pointer. This allocation is guaranteed to be aligned properly for 2516 * DMA 2517 */ 2518 kmalloc_size = urb->transfer_buffer_length + 2519 (dma_get_cache_alignment() - 1) + 2520 sizeof(urb->transfer_buffer); 2521 2522 kmalloc_ptr = kmalloc(kmalloc_size, mem_flags); 2523 if (!kmalloc_ptr) 2524 return -ENOMEM; 2525 2526 /* 2527 * Position value of original urb->transfer_buffer pointer to the end 2528 * of allocation for later referencing 2529 */ 2530 memcpy(PTR_ALIGN(kmalloc_ptr + urb->transfer_buffer_length, 2531 dma_get_cache_alignment()), 2532 &urb->transfer_buffer, sizeof(urb->transfer_buffer)); 2533 2534 if (usb_urb_dir_out(urb)) 2535 memcpy(kmalloc_ptr, urb->transfer_buffer, 2536 urb->transfer_buffer_length); 2537 urb->transfer_buffer = kmalloc_ptr; 2538 2539 urb->transfer_flags |= URB_ALIGNED_TEMP_BUFFER; 2540 2541 return 0; 2542} 2543 2544static int dwc2_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, 2545 gfp_t mem_flags) 2546{ 2547 int ret; 2548 2549 /* We assume setup_dma is always aligned; warn if not */ 2550 WARN_ON_ONCE(urb->setup_dma && 2551 (urb->setup_dma & (DWC2_USB_DMA_ALIGN - 1))); 2552 2553 ret = dwc2_alloc_dma_aligned_buffer(urb, mem_flags); 2554 if (ret) 2555 return ret; 2556 2557 ret = usb_hcd_map_urb_for_dma(hcd, urb, mem_flags); 2558 if (ret) 2559 dwc2_free_dma_aligned_buffer(urb); 2560 2561 return ret; 2562} 2563 2564static void dwc2_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb) 2565{ 2566 usb_hcd_unmap_urb_for_dma(hcd, urb); 2567 dwc2_free_dma_aligned_buffer(urb); 2568} 2569 2570/** 2571 * dwc2_assign_and_init_hc() - Assigns transactions from a QTD to a free host 2572 * channel and initializes the host channel to perform the transactions. The 2573 * host channel is removed from the free list. 2574 * 2575 * @hsotg: The HCD state structure 2576 * @qh: Transactions from the first QTD for this QH are selected and assigned 2577 * to a free host channel 2578 */ 2579static int dwc2_assign_and_init_hc(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) 2580{ 2581 struct dwc2_host_chan *chan; 2582 struct dwc2_hcd_urb *urb; 2583 struct dwc2_qtd *qtd; 2584 2585 if (dbg_qh(qh)) 2586 dev_vdbg(hsotg->dev, "%s(%p,%p)\n", __func__, hsotg, qh); 2587 2588 if (list_empty(&qh->qtd_list)) { 2589 dev_dbg(hsotg->dev, "No QTDs in QH list\n"); 2590 return -ENOMEM; 2591 } 2592 2593 if (list_empty(&hsotg->free_hc_list)) { 2594 dev_dbg(hsotg->dev, "No free channel to assign\n"); 2595 return -ENOMEM; 2596 } 2597 2598 chan = list_first_entry(&hsotg->free_hc_list, struct dwc2_host_chan, 2599 hc_list_entry); 2600 2601 /* Remove host channel from free list */ 2602 list_del_init(&chan->hc_list_entry); 2603 2604 qtd = list_first_entry(&qh->qtd_list, struct dwc2_qtd, qtd_list_entry); 2605 urb = qtd->urb; 2606 qh->channel = chan; 2607 qtd->in_process = 1; 2608 2609 /* 2610 * Use usb_pipedevice to determine device address. This address is 2611 * 0 before the SET_ADDRESS command and the correct address afterward. 2612 */ 2613 chan->dev_addr = dwc2_hcd_get_dev_addr(&urb->pipe_info); 2614 chan->ep_num = dwc2_hcd_get_ep_num(&urb->pipe_info); 2615 chan->speed = qh->dev_speed; 2616 chan->max_packet = qh->maxp; 2617 2618 chan->xfer_started = 0; 2619 chan->halt_status = DWC2_HC_XFER_NO_HALT_STATUS; 2620 chan->error_state = (qtd->error_count > 0); 2621 chan->halt_on_queue = 0; 2622 chan->halt_pending = 0; 2623 chan->requests = 0; 2624 2625 /* 2626 * The following values may be modified in the transfer type section 2627 * below. The xfer_len value may be reduced when the transfer is 2628 * started to accommodate the max widths of the XferSize and PktCnt 2629 * fields in the HCTSIZn register. 2630 */ 2631 2632 chan->ep_is_in = (dwc2_hcd_is_pipe_in(&urb->pipe_info) != 0); 2633 if (chan->ep_is_in) 2634 chan->do_ping = 0; 2635 else 2636 chan->do_ping = qh->ping_state; 2637 2638 chan->data_pid_start = qh->data_toggle; 2639 chan->multi_count = 1; 2640 2641 if (urb->actual_length > urb->length && 2642 !dwc2_hcd_is_pipe_in(&urb->pipe_info)) 2643 urb->actual_length = urb->length; 2644 2645 if (hsotg->params.host_dma) 2646 chan->xfer_dma = urb->dma + urb->actual_length; 2647 else 2648 chan->xfer_buf = (u8 *)urb->buf + urb->actual_length; 2649 2650 chan->xfer_len = urb->length - urb->actual_length; 2651 chan->xfer_count = 0; 2652 2653 /* Set the split attributes if required */ 2654 if (qh->do_split) 2655 dwc2_hc_init_split(hsotg, chan, qtd, urb); 2656 else 2657 chan->do_split = 0; 2658 2659 /* Set the transfer attributes */ 2660 dwc2_hc_init_xfer(hsotg, chan, qtd); 2661 2662 /* For non-dword aligned buffers */ 2663 if (hsotg->params.host_dma && qh->do_split && 2664 chan->ep_is_in && (chan->xfer_dma & 0x3)) { 2665 dev_vdbg(hsotg->dev, "Non-aligned buffer\n"); 2666 if (dwc2_alloc_split_dma_aligned_buf(hsotg, qh, chan)) { 2667 dev_err(hsotg->dev, 2668 "Failed to allocate memory to handle non-aligned buffer\n"); 2669 /* Add channel back to free list */ 2670 chan->align_buf = 0; 2671 chan->multi_count = 0; 2672 list_add_tail(&chan->hc_list_entry, 2673 &hsotg->free_hc_list); 2674 qtd->in_process = 0; 2675 qh->channel = NULL; 2676 return -ENOMEM; 2677 } 2678 } else { 2679 /* 2680 * We assume that DMA is always aligned in non-split 2681 * case or split out case. Warn if not. 2682 */ 2683 WARN_ON_ONCE(hsotg->params.host_dma && 2684 (chan->xfer_dma & 0x3)); 2685 chan->align_buf = 0; 2686 } 2687 2688 if (chan->ep_type == USB_ENDPOINT_XFER_INT || 2689 chan->ep_type == USB_ENDPOINT_XFER_ISOC) 2690 /* 2691 * This value may be modified when the transfer is started 2692 * to reflect the actual transfer length 2693 */ 2694 chan->multi_count = qh->maxp_mult; 2695 2696 if (hsotg->params.dma_desc_enable) { 2697 chan->desc_list_addr = qh->desc_list_dma; 2698 chan->desc_list_sz = qh->desc_list_sz; 2699 } 2700 2701 dwc2_hc_init(hsotg, chan); 2702 chan->qh = qh; 2703 2704 return 0; 2705} 2706 2707/** 2708 * dwc2_hcd_select_transactions() - Selects transactions from the HCD transfer 2709 * schedule and assigns them to available host channels. Called from the HCD 2710 * interrupt handler functions. 2711 * 2712 * @hsotg: The HCD state structure 2713 * 2714 * Return: The types of new transactions that were assigned to host channels 2715 */ 2716enum dwc2_transaction_type dwc2_hcd_select_transactions( 2717 struct dwc2_hsotg *hsotg) 2718{ 2719 enum dwc2_transaction_type ret_val = DWC2_TRANSACTION_NONE; 2720 struct list_head *qh_ptr; 2721 struct dwc2_qh *qh; 2722 int num_channels; 2723 2724#ifdef DWC2_DEBUG_SOF 2725 dev_vdbg(hsotg->dev, " Select Transactions\n"); 2726#endif 2727 2728 /* Process entries in the periodic ready list */ 2729 qh_ptr = hsotg->periodic_sched_ready.next; 2730 while (qh_ptr != &hsotg->periodic_sched_ready) { 2731 if (list_empty(&hsotg->free_hc_list)) 2732 break; 2733 if (hsotg->params.uframe_sched) { 2734 if (hsotg->available_host_channels <= 1) 2735 break; 2736 hsotg->available_host_channels--; 2737 } 2738 qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry); 2739 if (dwc2_assign_and_init_hc(hsotg, qh)) 2740 break; 2741 2742 /* 2743 * Move the QH from the periodic ready schedule to the 2744 * periodic assigned schedule 2745 */ 2746 qh_ptr = qh_ptr->next; 2747 list_move_tail(&qh->qh_list_entry, 2748 &hsotg->periodic_sched_assigned); 2749 ret_val = DWC2_TRANSACTION_PERIODIC; 2750 } 2751 2752 /* 2753 * Process entries in the inactive portion of the non-periodic 2754 * schedule. Some free host channels may not be used if they are 2755 * reserved for periodic transfers. 2756 */ 2757 num_channels = hsotg->params.host_channels; 2758 qh_ptr = hsotg->non_periodic_sched_inactive.next; 2759 while (qh_ptr != &hsotg->non_periodic_sched_inactive) { 2760 if (!hsotg->params.uframe_sched && 2761 hsotg->non_periodic_channels >= num_channels - 2762 hsotg->periodic_channels) 2763 break; 2764 if (list_empty(&hsotg->free_hc_list)) 2765 break; 2766 qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry); 2767 if (hsotg->params.uframe_sched) { 2768 if (hsotg->available_host_channels < 1) 2769 break; 2770 hsotg->available_host_channels--; 2771 } 2772 2773 if (dwc2_assign_and_init_hc(hsotg, qh)) 2774 break; 2775 2776 /* 2777 * Move the QH from the non-periodic inactive schedule to the 2778 * non-periodic active schedule 2779 */ 2780 qh_ptr = qh_ptr->next; 2781 list_move_tail(&qh->qh_list_entry, 2782 &hsotg->non_periodic_sched_active); 2783 2784 if (ret_val == DWC2_TRANSACTION_NONE) 2785 ret_val = DWC2_TRANSACTION_NON_PERIODIC; 2786 else 2787 ret_val = DWC2_TRANSACTION_ALL; 2788 2789 if (!hsotg->params.uframe_sched) 2790 hsotg->non_periodic_channels++; 2791 } 2792 2793 return ret_val; 2794} 2795 2796/** 2797 * dwc2_queue_transaction() - Attempts to queue a single transaction request for 2798 * a host channel associated with either a periodic or non-periodic transfer 2799 * 2800 * @hsotg: The HCD state structure 2801 * @chan: Host channel descriptor associated with either a periodic or 2802 * non-periodic transfer 2803 * @fifo_dwords_avail: Number of DWORDs available in the periodic Tx FIFO 2804 * for periodic transfers or the non-periodic Tx FIFO 2805 * for non-periodic transfers 2806 * 2807 * Return: 1 if a request is queued and more requests may be needed to 2808 * complete the transfer, 0 if no more requests are required for this 2809 * transfer, -1 if there is insufficient space in the Tx FIFO 2810 * 2811 * This function assumes that there is space available in the appropriate 2812 * request queue. For an OUT transfer or SETUP transaction in Slave mode, 2813 * it checks whether space is available in the appropriate Tx FIFO. 2814 * 2815 * Must be called with interrupt disabled and spinlock held 2816 */ 2817static int dwc2_queue_transaction(struct dwc2_hsotg *hsotg, 2818 struct dwc2_host_chan *chan, 2819 u16 fifo_dwords_avail) 2820{ 2821 int retval = 0; 2822 2823 if (chan->do_split) 2824 /* Put ourselves on the list to keep order straight */ 2825 list_move_tail(&chan->split_order_list_entry, 2826 &hsotg->split_order); 2827 2828 if (hsotg->params.host_dma && chan->qh) { 2829 if (hsotg->params.dma_desc_enable) { 2830 if (!chan->xfer_started || 2831 chan->ep_type == USB_ENDPOINT_XFER_ISOC) { 2832 dwc2_hcd_start_xfer_ddma(hsotg, chan->qh); 2833 chan->qh->ping_state = 0; 2834 } 2835 } else if (!chan->xfer_started) { 2836 dwc2_hc_start_transfer(hsotg, chan); 2837 chan->qh->ping_state = 0; 2838 } 2839 } else if (chan->halt_pending) { 2840 /* Don't queue a request if the channel has been halted */ 2841 } else if (chan->halt_on_queue) { 2842 dwc2_hc_halt(hsotg, chan, chan->halt_status); 2843 } else if (chan->do_ping) { 2844 if (!chan->xfer_started) 2845 dwc2_hc_start_transfer(hsotg, chan); 2846 } else if (!chan->ep_is_in || 2847 chan->data_pid_start == DWC2_HC_PID_SETUP) { 2848 if ((fifo_dwords_avail * 4) >= chan->max_packet) { 2849 if (!chan->xfer_started) { 2850 dwc2_hc_start_transfer(hsotg, chan); 2851 retval = 1; 2852 } else { 2853 retval = dwc2_hc_continue_transfer(hsotg, chan); 2854 } 2855 } else { 2856 retval = -1; 2857 } 2858 } else { 2859 if (!chan->xfer_started) { 2860 dwc2_hc_start_transfer(hsotg, chan); 2861 retval = 1; 2862 } else { 2863 retval = dwc2_hc_continue_transfer(hsotg, chan); 2864 } 2865 } 2866 2867 return retval; 2868} 2869 2870/* 2871 * Processes periodic channels for the next frame and queues transactions for 2872 * these channels to the DWC_otg controller. After queueing transactions, the 2873 * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions 2874 * to queue as Periodic Tx FIFO or request queue space becomes available. 2875 * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled. 2876 * 2877 * Must be called with interrupt disabled and spinlock held 2878 */ 2879static void dwc2_process_periodic_channels(struct dwc2_hsotg *hsotg) 2880{ 2881 struct list_head *qh_ptr; 2882 struct dwc2_qh *qh; 2883 u32 tx_status; 2884 u32 fspcavail; 2885 u32 gintmsk; 2886 int status; 2887 bool no_queue_space = false; 2888 bool no_fifo_space = false; 2889 u32 qspcavail; 2890 2891 /* If empty list then just adjust interrupt enables */ 2892 if (list_empty(&hsotg->periodic_sched_assigned)) 2893 goto exit; 2894 2895 if (dbg_perio()) 2896 dev_vdbg(hsotg->dev, "Queue periodic transactions\n"); 2897 2898 tx_status = dwc2_readl(hsotg, HPTXSTS); 2899 qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> 2900 TXSTS_QSPCAVAIL_SHIFT; 2901 fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> 2902 TXSTS_FSPCAVAIL_SHIFT; 2903 2904 if (dbg_perio()) { 2905 dev_vdbg(hsotg->dev, " P Tx Req Queue Space Avail (before queue): %d\n", 2906 qspcavail); 2907 dev_vdbg(hsotg->dev, " P Tx FIFO Space Avail (before queue): %d\n", 2908 fspcavail); 2909 } 2910 2911 qh_ptr = hsotg->periodic_sched_assigned.next; 2912 while (qh_ptr != &hsotg->periodic_sched_assigned) { 2913 tx_status = dwc2_readl(hsotg, HPTXSTS); 2914 qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> 2915 TXSTS_QSPCAVAIL_SHIFT; 2916 if (qspcavail == 0) { 2917 no_queue_space = true; 2918 break; 2919 } 2920 2921 qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry); 2922 if (!qh->channel) { 2923 qh_ptr = qh_ptr->next; 2924 continue; 2925 } 2926 2927 /* Make sure EP's TT buffer is clean before queueing qtds */ 2928 if (qh->tt_buffer_dirty) { 2929 qh_ptr = qh_ptr->next; 2930 continue; 2931 } 2932 2933 /* 2934 * Set a flag if we're queuing high-bandwidth in slave mode. 2935 * The flag prevents any halts to get into the request queue in 2936 * the middle of multiple high-bandwidth packets getting queued. 2937 */ 2938 if (!hsotg->params.host_dma && 2939 qh->channel->multi_count > 1) 2940 hsotg->queuing_high_bandwidth = 1; 2941 2942 fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> 2943 TXSTS_FSPCAVAIL_SHIFT; 2944 status = dwc2_queue_transaction(hsotg, qh->channel, fspcavail); 2945 if (status < 0) { 2946 no_fifo_space = true; 2947 break; 2948 } 2949 2950 /* 2951 * In Slave mode, stay on the current transfer until there is 2952 * nothing more to do or the high-bandwidth request count is 2953 * reached. In DMA mode, only need to queue one request. The 2954 * controller automatically handles multiple packets for 2955 * high-bandwidth transfers. 2956 */ 2957 if (hsotg->params.host_dma || status == 0 || 2958 qh->channel->requests == qh->channel->multi_count) { 2959 qh_ptr = qh_ptr->next; 2960 /* 2961 * Move the QH from the periodic assigned schedule to 2962 * the periodic queued schedule 2963 */ 2964 list_move_tail(&qh->qh_list_entry, 2965 &hsotg->periodic_sched_queued); 2966 2967 /* done queuing high bandwidth */ 2968 hsotg->queuing_high_bandwidth = 0; 2969 } 2970 } 2971 2972exit: 2973 if (no_queue_space || no_fifo_space || 2974 (!hsotg->params.host_dma && 2975 !list_empty(&hsotg->periodic_sched_assigned))) { 2976 /* 2977 * May need to queue more transactions as the request 2978 * queue or Tx FIFO empties. Enable the periodic Tx 2979 * FIFO empty interrupt. (Always use the half-empty 2980 * level to ensure that new requests are loaded as 2981 * soon as possible.) 2982 */ 2983 gintmsk = dwc2_readl(hsotg, GINTMSK); 2984 if (!(gintmsk & GINTSTS_PTXFEMP)) { 2985 gintmsk |= GINTSTS_PTXFEMP; 2986 dwc2_writel(hsotg, gintmsk, GINTMSK); 2987 } 2988 } else { 2989 /* 2990 * Disable the Tx FIFO empty interrupt since there are 2991 * no more transactions that need to be queued right 2992 * now. This function is called from interrupt 2993 * handlers to queue more transactions as transfer 2994 * states change. 2995 */ 2996 gintmsk = dwc2_readl(hsotg, GINTMSK); 2997 if (gintmsk & GINTSTS_PTXFEMP) { 2998 gintmsk &= ~GINTSTS_PTXFEMP; 2999 dwc2_writel(hsotg, gintmsk, GINTMSK); 3000 } 3001 } 3002} 3003 3004/* 3005 * Processes active non-periodic channels and queues transactions for these 3006 * channels to the DWC_otg controller. After queueing transactions, the NP Tx 3007 * FIFO Empty interrupt is enabled if there are more transactions to queue as 3008 * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx 3009 * FIFO Empty interrupt is disabled. 3010 * 3011 * Must be called with interrupt disabled and spinlock held 3012 */ 3013static void dwc2_process_non_periodic_channels(struct dwc2_hsotg *hsotg) 3014{ 3015 struct list_head *orig_qh_ptr; 3016 struct dwc2_qh *qh; 3017 u32 tx_status; 3018 u32 qspcavail; 3019 u32 fspcavail; 3020 u32 gintmsk; 3021 int status; 3022 int no_queue_space = 0; 3023 int no_fifo_space = 0; 3024 int more_to_do = 0; 3025 3026 dev_vdbg(hsotg->dev, "Queue non-periodic transactions\n"); 3027 3028 tx_status = dwc2_readl(hsotg, GNPTXSTS); 3029 qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> 3030 TXSTS_QSPCAVAIL_SHIFT; 3031 fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> 3032 TXSTS_FSPCAVAIL_SHIFT; 3033 dev_vdbg(hsotg->dev, " NP Tx Req Queue Space Avail (before queue): %d\n", 3034 qspcavail); 3035 dev_vdbg(hsotg->dev, " NP Tx FIFO Space Avail (before queue): %d\n", 3036 fspcavail); 3037 3038 /* 3039 * Keep track of the starting point. Skip over the start-of-list 3040 * entry. 3041 */ 3042 if (hsotg->non_periodic_qh_ptr == &hsotg->non_periodic_sched_active) 3043 hsotg->non_periodic_qh_ptr = hsotg->non_periodic_qh_ptr->next; 3044 orig_qh_ptr = hsotg->non_periodic_qh_ptr; 3045 3046 /* 3047 * Process once through the active list or until no more space is 3048 * available in the request queue or the Tx FIFO 3049 */ 3050 do { 3051 tx_status = dwc2_readl(hsotg, GNPTXSTS); 3052 qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> 3053 TXSTS_QSPCAVAIL_SHIFT; 3054 if (!hsotg->params.host_dma && qspcavail == 0) { 3055 no_queue_space = 1; 3056 break; 3057 } 3058 3059 qh = list_entry(hsotg->non_periodic_qh_ptr, struct dwc2_qh, 3060 qh_list_entry); 3061 if (!qh->channel) 3062 goto next; 3063 3064 /* Make sure EP's TT buffer is clean before queueing qtds */ 3065 if (qh->tt_buffer_dirty) 3066 goto next; 3067 3068 fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> 3069 TXSTS_FSPCAVAIL_SHIFT; 3070 status = dwc2_queue_transaction(hsotg, qh->channel, fspcavail); 3071 3072 if (status > 0) { 3073 more_to_do = 1; 3074 } else if (status < 0) { 3075 no_fifo_space = 1; 3076 break; 3077 } 3078next: 3079 /* Advance to next QH, skipping start-of-list entry */ 3080 hsotg->non_periodic_qh_ptr = hsotg->non_periodic_qh_ptr->next; 3081 if (hsotg->non_periodic_qh_ptr == 3082 &hsotg->non_periodic_sched_active) 3083 hsotg->non_periodic_qh_ptr = 3084 hsotg->non_periodic_qh_ptr->next; 3085 } while (hsotg->non_periodic_qh_ptr != orig_qh_ptr); 3086 3087 if (!hsotg->params.host_dma) { 3088 tx_status = dwc2_readl(hsotg, GNPTXSTS); 3089 qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> 3090 TXSTS_QSPCAVAIL_SHIFT; 3091 fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> 3092 TXSTS_FSPCAVAIL_SHIFT; 3093 dev_vdbg(hsotg->dev, 3094 " NP Tx Req Queue Space Avail (after queue): %d\n", 3095 qspcavail); 3096 dev_vdbg(hsotg->dev, 3097 " NP Tx FIFO Space Avail (after queue): %d\n", 3098 fspcavail); 3099 3100 if (more_to_do || no_queue_space || no_fifo_space) { 3101 /* 3102 * May need to queue more transactions as the request 3103 * queue or Tx FIFO empties. Enable the non-periodic 3104 * Tx FIFO empty interrupt. (Always use the half-empty 3105 * level to ensure that new requests are loaded as 3106 * soon as possible.) 3107 */ 3108 gintmsk = dwc2_readl(hsotg, GINTMSK); 3109 gintmsk |= GINTSTS_NPTXFEMP; 3110 dwc2_writel(hsotg, gintmsk, GINTMSK); 3111 } else { 3112 /* 3113 * Disable the Tx FIFO empty interrupt since there are 3114 * no more transactions that need to be queued right 3115 * now. This function is called from interrupt 3116 * handlers to queue more transactions as transfer 3117 * states change. 3118 */ 3119 gintmsk = dwc2_readl(hsotg, GINTMSK); 3120 gintmsk &= ~GINTSTS_NPTXFEMP; 3121 dwc2_writel(hsotg, gintmsk, GINTMSK); 3122 } 3123 } 3124} 3125 3126/** 3127 * dwc2_hcd_queue_transactions() - Processes the currently active host channels 3128 * and queues transactions for these channels to the DWC_otg controller. Called 3129 * from the HCD interrupt handler functions. 3130 * 3131 * @hsotg: The HCD state structure 3132 * @tr_type: The type(s) of transactions to queue (non-periodic, periodic, 3133 * or both) 3134 * 3135 * Must be called with interrupt disabled and spinlock held 3136 */ 3137void dwc2_hcd_queue_transactions(struct dwc2_hsotg *hsotg, 3138 enum dwc2_transaction_type tr_type) 3139{ 3140#ifdef DWC2_DEBUG_SOF 3141 dev_vdbg(hsotg->dev, "Queue Transactions\n"); 3142#endif 3143 /* Process host channels associated with periodic transfers */ 3144 if (tr_type == DWC2_TRANSACTION_PERIODIC || 3145 tr_type == DWC2_TRANSACTION_ALL) 3146 dwc2_process_periodic_channels(hsotg); 3147 3148 /* Process host channels associated with non-periodic transfers */ 3149 if (tr_type == DWC2_TRANSACTION_NON_PERIODIC || 3150 tr_type == DWC2_TRANSACTION_ALL) { 3151 if (!list_empty(&hsotg->non_periodic_sched_active)) { 3152 dwc2_process_non_periodic_channels(hsotg); 3153 } else { 3154 /* 3155 * Ensure NP Tx FIFO empty interrupt is disabled when 3156 * there are no non-periodic transfers to process 3157 */ 3158 u32 gintmsk = dwc2_readl(hsotg, GINTMSK); 3159 3160 gintmsk &= ~GINTSTS_NPTXFEMP; 3161 dwc2_writel(hsotg, gintmsk, GINTMSK); 3162 } 3163 } 3164} 3165 3166static void dwc2_conn_id_status_change(struct work_struct *work) 3167{ 3168 struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg, 3169 wf_otg); 3170 u32 count = 0; 3171 u32 gotgctl; 3172 unsigned long flags; 3173 3174 dev_dbg(hsotg->dev, "%s()\n", __func__); 3175 3176 gotgctl = dwc2_readl(hsotg, GOTGCTL); 3177 dev_dbg(hsotg->dev, "gotgctl=%0x\n", gotgctl); 3178 dev_dbg(hsotg->dev, "gotgctl.b.conidsts=%d\n", 3179 !!(gotgctl & GOTGCTL_CONID_B)); 3180 3181 /* B-Device connector (Device Mode) */ 3182 if (gotgctl & GOTGCTL_CONID_B) { 3183 dwc2_vbus_supply_exit(hsotg); 3184 /* Wait for switch to device mode */ 3185 dev_dbg(hsotg->dev, "connId B\n"); 3186 if (hsotg->bus_suspended) { 3187 dev_info(hsotg->dev, 3188 "Do port resume before switching to device mode\n"); 3189 dwc2_port_resume(hsotg); 3190 } 3191 while (!dwc2_is_device_mode(hsotg)) { 3192 dev_info(hsotg->dev, 3193 "Waiting for Peripheral Mode, Mode=%s\n", 3194 dwc2_is_host_mode(hsotg) ? "Host" : 3195 "Peripheral"); 3196 msleep(20); 3197 /* 3198 * Sometimes the initial GOTGCTRL read is wrong, so 3199 * check it again and jump to host mode if that was 3200 * the case. 3201 */ 3202 gotgctl = dwc2_readl(hsotg, GOTGCTL); 3203 if (!(gotgctl & GOTGCTL_CONID_B)) 3204 goto host; 3205 if (++count > 250) 3206 break; 3207 } 3208 if (count > 250) 3209 dev_err(hsotg->dev, 3210 "Connection id status change timed out\n"); 3211 hsotg->op_state = OTG_STATE_B_PERIPHERAL; 3212 dwc2_core_init(hsotg, false); 3213 dwc2_enable_global_interrupts(hsotg); 3214 spin_lock_irqsave(&hsotg->lock, flags); 3215 dwc2_hsotg_core_init_disconnected(hsotg, false); 3216 spin_unlock_irqrestore(&hsotg->lock, flags); 3217 /* Enable ACG feature in device mode,if supported */ 3218 dwc2_enable_acg(hsotg); 3219 dwc2_hsotg_core_connect(hsotg); 3220 } else { 3221host: 3222 /* A-Device connector (Host Mode) */ 3223 dev_dbg(hsotg->dev, "connId A\n"); 3224 while (!dwc2_is_host_mode(hsotg)) { 3225 dev_info(hsotg->dev, "Waiting for Host Mode, Mode=%s\n", 3226 dwc2_is_host_mode(hsotg) ? 3227 "Host" : "Peripheral"); 3228 msleep(20); 3229 if (++count > 250) 3230 break; 3231 } 3232 if (count > 250) 3233 dev_err(hsotg->dev, 3234 "Connection id status change timed out\n"); 3235 3236 spin_lock_irqsave(&hsotg->lock, flags); 3237 dwc2_hsotg_disconnect(hsotg); 3238 spin_unlock_irqrestore(&hsotg->lock, flags); 3239 3240 hsotg->op_state = OTG_STATE_A_HOST; 3241 /* Initialize the Core for Host mode */ 3242 dwc2_core_init(hsotg, false); 3243 dwc2_enable_global_interrupts(hsotg); 3244 dwc2_hcd_start(hsotg); 3245 } 3246} 3247 3248static void dwc2_wakeup_detected(struct timer_list *t) 3249{ 3250 struct dwc2_hsotg *hsotg = from_timer(hsotg, t, wkp_timer); 3251 u32 hprt0; 3252 3253 dev_dbg(hsotg->dev, "%s()\n", __func__); 3254 3255 /* 3256 * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms 3257 * so that OPT tests pass with all PHYs.) 3258 */ 3259 hprt0 = dwc2_read_hprt0(hsotg); 3260 dev_dbg(hsotg->dev, "Resume: HPRT0=%0x\n", hprt0); 3261 hprt0 &= ~HPRT0_RES; 3262 dwc2_writel(hsotg, hprt0, HPRT0); 3263 dev_dbg(hsotg->dev, "Clear Resume: HPRT0=%0x\n", 3264 dwc2_readl(hsotg, HPRT0)); 3265 3266 dwc2_hcd_rem_wakeup(hsotg); 3267 hsotg->bus_suspended = false; 3268 3269 /* Change to L0 state */ 3270 hsotg->lx_state = DWC2_L0; 3271} 3272 3273static int dwc2_host_is_b_hnp_enabled(struct dwc2_hsotg *hsotg) 3274{ 3275 struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg); 3276 3277 return hcd->self.b_hnp_enable; 3278} 3279 3280/* Must NOT be called with interrupt disabled or spinlock held */ 3281static void dwc2_port_suspend(struct dwc2_hsotg *hsotg, u16 windex) 3282{ 3283 unsigned long flags; 3284 u32 hprt0; 3285 u32 pcgctl; 3286 u32 gotgctl; 3287 3288 dev_dbg(hsotg->dev, "%s()\n", __func__); 3289 3290 spin_lock_irqsave(&hsotg->lock, flags); 3291 3292 if (windex == hsotg->otg_port && dwc2_host_is_b_hnp_enabled(hsotg)) { 3293 gotgctl = dwc2_readl(hsotg, GOTGCTL); 3294 gotgctl |= GOTGCTL_HSTSETHNPEN; 3295 dwc2_writel(hsotg, gotgctl, GOTGCTL); 3296 hsotg->op_state = OTG_STATE_A_SUSPEND; 3297 } 3298 3299 hprt0 = dwc2_read_hprt0(hsotg); 3300 hprt0 |= HPRT0_SUSP; 3301 dwc2_writel(hsotg, hprt0, HPRT0); 3302 3303 hsotg->bus_suspended = true; 3304 3305 /* 3306 * If power_down is supported, Phy clock will be suspended 3307 * after registers are backuped. 3308 */ 3309 if (!hsotg->params.power_down) { 3310 /* Suspend the Phy Clock */ 3311 pcgctl = dwc2_readl(hsotg, PCGCTL); 3312 pcgctl |= PCGCTL_STOPPCLK; 3313 dwc2_writel(hsotg, pcgctl, PCGCTL); 3314 udelay(10); 3315 } 3316 3317 /* For HNP the bus must be suspended for at least 200ms */ 3318 if (dwc2_host_is_b_hnp_enabled(hsotg)) { 3319 pcgctl = dwc2_readl(hsotg, PCGCTL); 3320 pcgctl &= ~PCGCTL_STOPPCLK; 3321 dwc2_writel(hsotg, pcgctl, PCGCTL); 3322 3323 spin_unlock_irqrestore(&hsotg->lock, flags); 3324 3325 msleep(200); 3326 } else { 3327 spin_unlock_irqrestore(&hsotg->lock, flags); 3328 } 3329} 3330 3331/* Must NOT be called with interrupt disabled or spinlock held */ 3332static void dwc2_port_resume(struct dwc2_hsotg *hsotg) 3333{ 3334 unsigned long flags; 3335 u32 hprt0; 3336 u32 pcgctl; 3337 3338 spin_lock_irqsave(&hsotg->lock, flags); 3339 3340 /* 3341 * If power_down is supported, Phy clock is already resumed 3342 * after registers restore. 3343 */ 3344 if (!hsotg->params.power_down) { 3345 pcgctl = dwc2_readl(hsotg, PCGCTL); 3346 pcgctl &= ~PCGCTL_STOPPCLK; 3347 dwc2_writel(hsotg, pcgctl, PCGCTL); 3348 spin_unlock_irqrestore(&hsotg->lock, flags); 3349 msleep(20); 3350 spin_lock_irqsave(&hsotg->lock, flags); 3351 } 3352 3353 hprt0 = dwc2_read_hprt0(hsotg); 3354 hprt0 |= HPRT0_RES; 3355 hprt0 &= ~HPRT0_SUSP; 3356 dwc2_writel(hsotg, hprt0, HPRT0); 3357 spin_unlock_irqrestore(&hsotg->lock, flags); 3358 3359 msleep(USB_RESUME_TIMEOUT); 3360 3361 spin_lock_irqsave(&hsotg->lock, flags); 3362 hprt0 = dwc2_read_hprt0(hsotg); 3363 hprt0 &= ~(HPRT0_RES | HPRT0_SUSP); 3364 dwc2_writel(hsotg, hprt0, HPRT0); 3365 hsotg->bus_suspended = false; 3366 spin_unlock_irqrestore(&hsotg->lock, flags); 3367} 3368 3369/* Handles hub class-specific requests */ 3370static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq, 3371 u16 wvalue, u16 windex, char *buf, u16 wlength) 3372{ 3373 struct usb_hub_descriptor *hub_desc; 3374 int retval = 0; 3375 u32 hprt0; 3376 u32 port_status; 3377 u32 speed; 3378 u32 pcgctl; 3379 u32 pwr; 3380 3381 switch (typereq) { 3382 case ClearHubFeature: 3383 dev_dbg(hsotg->dev, "ClearHubFeature %1xh\n", wvalue); 3384 3385 switch (wvalue) { 3386 case C_HUB_LOCAL_POWER: 3387 case C_HUB_OVER_CURRENT: 3388 /* Nothing required here */ 3389 break; 3390 3391 default: 3392 retval = -EINVAL; 3393 dev_err(hsotg->dev, 3394 "ClearHubFeature request %1xh unknown\n", 3395 wvalue); 3396 } 3397 break; 3398 3399 case ClearPortFeature: 3400 if (wvalue != USB_PORT_FEAT_L1) 3401 if (!windex || windex > 1) 3402 goto error; 3403 switch (wvalue) { 3404 case USB_PORT_FEAT_ENABLE: 3405 dev_dbg(hsotg->dev, 3406 "ClearPortFeature USB_PORT_FEAT_ENABLE\n"); 3407 hprt0 = dwc2_read_hprt0(hsotg); 3408 hprt0 |= HPRT0_ENA; 3409 dwc2_writel(hsotg, hprt0, HPRT0); 3410 break; 3411 3412 case USB_PORT_FEAT_SUSPEND: 3413 dev_dbg(hsotg->dev, 3414 "ClearPortFeature USB_PORT_FEAT_SUSPEND\n"); 3415 3416 if (hsotg->bus_suspended) { 3417 if (hsotg->hibernated) 3418 dwc2_exit_hibernation(hsotg, 0, 0, 1); 3419 else 3420 dwc2_port_resume(hsotg); 3421 } 3422 break; 3423 3424 case USB_PORT_FEAT_POWER: 3425 dev_dbg(hsotg->dev, 3426 "ClearPortFeature USB_PORT_FEAT_POWER\n"); 3427 hprt0 = dwc2_read_hprt0(hsotg); 3428 pwr = hprt0 & HPRT0_PWR; 3429 hprt0 &= ~HPRT0_PWR; 3430 dwc2_writel(hsotg, hprt0, HPRT0); 3431 if (pwr) 3432 dwc2_vbus_supply_exit(hsotg); 3433 break; 3434 3435 case USB_PORT_FEAT_INDICATOR: 3436 dev_dbg(hsotg->dev, 3437 "ClearPortFeature USB_PORT_FEAT_INDICATOR\n"); 3438 /* Port indicator not supported */ 3439 break; 3440 3441 case USB_PORT_FEAT_C_CONNECTION: 3442 /* 3443 * Clears driver's internal Connect Status Change flag 3444 */ 3445 dev_dbg(hsotg->dev, 3446 "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n"); 3447 hsotg->flags.b.port_connect_status_change = 0; 3448 break; 3449 3450 case USB_PORT_FEAT_C_RESET: 3451 /* Clears driver's internal Port Reset Change flag */ 3452 dev_dbg(hsotg->dev, 3453 "ClearPortFeature USB_PORT_FEAT_C_RESET\n"); 3454 hsotg->flags.b.port_reset_change = 0; 3455 break; 3456 3457 case USB_PORT_FEAT_C_ENABLE: 3458 /* 3459 * Clears the driver's internal Port Enable/Disable 3460 * Change flag 3461 */ 3462 dev_dbg(hsotg->dev, 3463 "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n"); 3464 hsotg->flags.b.port_enable_change = 0; 3465 break; 3466 3467 case USB_PORT_FEAT_C_SUSPEND: 3468 /* 3469 * Clears the driver's internal Port Suspend Change 3470 * flag, which is set when resume signaling on the host 3471 * port is complete 3472 */ 3473 dev_dbg(hsotg->dev, 3474 "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n"); 3475 hsotg->flags.b.port_suspend_change = 0; 3476 break; 3477 3478 case USB_PORT_FEAT_C_PORT_L1: 3479 dev_dbg(hsotg->dev, 3480 "ClearPortFeature USB_PORT_FEAT_C_PORT_L1\n"); 3481 hsotg->flags.b.port_l1_change = 0; 3482 break; 3483 3484 case USB_PORT_FEAT_C_OVER_CURRENT: 3485 dev_dbg(hsotg->dev, 3486 "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n"); 3487 hsotg->flags.b.port_over_current_change = 0; 3488 break; 3489 3490 default: 3491 retval = -EINVAL; 3492 dev_err(hsotg->dev, 3493 "ClearPortFeature request %1xh unknown or unsupported\n", 3494 wvalue); 3495 } 3496 break; 3497 3498 case GetHubDescriptor: 3499 dev_dbg(hsotg->dev, "GetHubDescriptor\n"); 3500 hub_desc = (struct usb_hub_descriptor *)buf; 3501 hub_desc->bDescLength = 9; 3502 hub_desc->bDescriptorType = USB_DT_HUB; 3503 hub_desc->bNbrPorts = 1; 3504 hub_desc->wHubCharacteristics = 3505 cpu_to_le16(HUB_CHAR_COMMON_LPSM | 3506 HUB_CHAR_INDV_PORT_OCPM); 3507 hub_desc->bPwrOn2PwrGood = 1; 3508 hub_desc->bHubContrCurrent = 0; 3509 hub_desc->u.hs.DeviceRemovable[0] = 0; 3510 hub_desc->u.hs.DeviceRemovable[1] = 0xff; 3511 break; 3512 3513 case GetHubStatus: 3514 dev_dbg(hsotg->dev, "GetHubStatus\n"); 3515 memset(buf, 0, 4); 3516 break; 3517 3518 case GetPortStatus: 3519 dev_vdbg(hsotg->dev, 3520 "GetPortStatus wIndex=0x%04x flags=0x%08x\n", windex, 3521 hsotg->flags.d32); 3522 if (!windex || windex > 1) 3523 goto error; 3524 3525 port_status = 0; 3526 if (hsotg->flags.b.port_connect_status_change) 3527 port_status |= USB_PORT_STAT_C_CONNECTION << 16; 3528 if (hsotg->flags.b.port_enable_change) 3529 port_status |= USB_PORT_STAT_C_ENABLE << 16; 3530 if (hsotg->flags.b.port_suspend_change) 3531 port_status |= USB_PORT_STAT_C_SUSPEND << 16; 3532 if (hsotg->flags.b.port_l1_change) 3533 port_status |= USB_PORT_STAT_C_L1 << 16; 3534 if (hsotg->flags.b.port_reset_change) 3535 port_status |= USB_PORT_STAT_C_RESET << 16; 3536 if (hsotg->flags.b.port_over_current_change) { 3537 dev_warn(hsotg->dev, "Overcurrent change detected\n"); 3538 port_status |= USB_PORT_STAT_C_OVERCURRENT << 16; 3539 } 3540 3541 if (!hsotg->flags.b.port_connect_status) { 3542 /* 3543 * The port is disconnected, which means the core is 3544 * either in device mode or it soon will be. Just 3545 * return 0's for the remainder of the port status 3546 * since the port register can't be read if the core 3547 * is in device mode. 3548 */ 3549 *(__le32 *)buf = cpu_to_le32(port_status); 3550 break; 3551 } 3552 3553 hprt0 = dwc2_readl(hsotg, HPRT0); 3554 dev_vdbg(hsotg->dev, " HPRT0: 0x%08x\n", hprt0); 3555 3556 if (hprt0 & HPRT0_CONNSTS) 3557 port_status |= USB_PORT_STAT_CONNECTION; 3558 if (hprt0 & HPRT0_ENA) 3559 port_status |= USB_PORT_STAT_ENABLE; 3560 if (hprt0 & HPRT0_SUSP) 3561 port_status |= USB_PORT_STAT_SUSPEND; 3562 if (hprt0 & HPRT0_OVRCURRACT) 3563 port_status |= USB_PORT_STAT_OVERCURRENT; 3564 if (hprt0 & HPRT0_RST) 3565 port_status |= USB_PORT_STAT_RESET; 3566 if (hprt0 & HPRT0_PWR) 3567 port_status |= USB_PORT_STAT_POWER; 3568 3569 speed = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT; 3570 if (speed == HPRT0_SPD_HIGH_SPEED) 3571 port_status |= USB_PORT_STAT_HIGH_SPEED; 3572 else if (speed == HPRT0_SPD_LOW_SPEED) 3573 port_status |= USB_PORT_STAT_LOW_SPEED; 3574 3575 if (hprt0 & HPRT0_TSTCTL_MASK) 3576 port_status |= USB_PORT_STAT_TEST; 3577 /* USB_PORT_FEAT_INDICATOR unsupported always 0 */ 3578 3579 if (hsotg->params.dma_desc_fs_enable) { 3580 /* 3581 * Enable descriptor DMA only if a full speed 3582 * device is connected. 3583 */ 3584 if (hsotg->new_connection && 3585 ((port_status & 3586 (USB_PORT_STAT_CONNECTION | 3587 USB_PORT_STAT_HIGH_SPEED | 3588 USB_PORT_STAT_LOW_SPEED)) == 3589 USB_PORT_STAT_CONNECTION)) { 3590 u32 hcfg; 3591 3592 dev_info(hsotg->dev, "Enabling descriptor DMA mode\n"); 3593 hsotg->params.dma_desc_enable = true; 3594 hcfg = dwc2_readl(hsotg, HCFG); 3595 hcfg |= HCFG_DESCDMA; 3596 dwc2_writel(hsotg, hcfg, HCFG); 3597 hsotg->new_connection = false; 3598 } 3599 } 3600 3601 dev_vdbg(hsotg->dev, "port_status=%08x\n", port_status); 3602 *(__le32 *)buf = cpu_to_le32(port_status); 3603 break; 3604 3605 case SetHubFeature: 3606 dev_dbg(hsotg->dev, "SetHubFeature\n"); 3607 /* No HUB features supported */ 3608 break; 3609 3610 case SetPortFeature: 3611 dev_dbg(hsotg->dev, "SetPortFeature\n"); 3612 if (wvalue != USB_PORT_FEAT_TEST && (!windex || windex > 1)) 3613 goto error; 3614 3615 if (!hsotg->flags.b.port_connect_status) { 3616 /* 3617 * The port is disconnected, which means the core is 3618 * either in device mode or it soon will be. Just 3619 * return without doing anything since the port 3620 * register can't be written if the core is in device 3621 * mode. 3622 */ 3623 break; 3624 } 3625 3626 switch (wvalue) { 3627 case USB_PORT_FEAT_SUSPEND: 3628 dev_dbg(hsotg->dev, 3629 "SetPortFeature - USB_PORT_FEAT_SUSPEND\n"); 3630 if (windex != hsotg->otg_port) 3631 goto error; 3632 if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_HIBERNATION) 3633 dwc2_enter_hibernation(hsotg, 1); 3634 else 3635 dwc2_port_suspend(hsotg, windex); 3636 break; 3637 3638 case USB_PORT_FEAT_POWER: 3639 dev_dbg(hsotg->dev, 3640 "SetPortFeature - USB_PORT_FEAT_POWER\n"); 3641 hprt0 = dwc2_read_hprt0(hsotg); 3642 pwr = hprt0 & HPRT0_PWR; 3643 hprt0 |= HPRT0_PWR; 3644 dwc2_writel(hsotg, hprt0, HPRT0); 3645 if (!pwr) 3646 dwc2_vbus_supply_init(hsotg); 3647 break; 3648 3649 case USB_PORT_FEAT_RESET: 3650 if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_HIBERNATION && 3651 hsotg->hibernated) 3652 dwc2_exit_hibernation(hsotg, 0, 1, 1); 3653 hprt0 = dwc2_read_hprt0(hsotg); 3654 dev_dbg(hsotg->dev, 3655 "SetPortFeature - USB_PORT_FEAT_RESET\n"); 3656 pcgctl = dwc2_readl(hsotg, PCGCTL); 3657 pcgctl &= ~(PCGCTL_ENBL_SLEEP_GATING | PCGCTL_STOPPCLK); 3658 dwc2_writel(hsotg, pcgctl, PCGCTL); 3659 /* ??? Original driver does this */ 3660 dwc2_writel(hsotg, 0, PCGCTL); 3661 3662 hprt0 = dwc2_read_hprt0(hsotg); 3663 pwr = hprt0 & HPRT0_PWR; 3664 /* Clear suspend bit if resetting from suspend state */ 3665 hprt0 &= ~HPRT0_SUSP; 3666 3667 /* 3668 * When B-Host the Port reset bit is set in the Start 3669 * HCD Callback function, so that the reset is started 3670 * within 1ms of the HNP success interrupt 3671 */ 3672 if (!dwc2_hcd_is_b_host(hsotg)) { 3673 hprt0 |= HPRT0_PWR | HPRT0_RST; 3674 dev_dbg(hsotg->dev, 3675 "In host mode, hprt0=%08x\n", hprt0); 3676 dwc2_writel(hsotg, hprt0, HPRT0); 3677 if (!pwr) 3678 dwc2_vbus_supply_init(hsotg); 3679 } 3680 3681 /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */ 3682 msleep(50); 3683 hprt0 &= ~HPRT0_RST; 3684 dwc2_writel(hsotg, hprt0, HPRT0); 3685 hsotg->lx_state = DWC2_L0; /* Now back to On state */ 3686 break; 3687 3688 case USB_PORT_FEAT_INDICATOR: 3689 dev_dbg(hsotg->dev, 3690 "SetPortFeature - USB_PORT_FEAT_INDICATOR\n"); 3691 /* Not supported */ 3692 break; 3693 3694 case USB_PORT_FEAT_TEST: 3695 hprt0 = dwc2_read_hprt0(hsotg); 3696 dev_dbg(hsotg->dev, 3697 "SetPortFeature - USB_PORT_FEAT_TEST\n"); 3698 hprt0 &= ~HPRT0_TSTCTL_MASK; 3699 hprt0 |= (windex >> 8) << HPRT0_TSTCTL_SHIFT; 3700 dwc2_writel(hsotg, hprt0, HPRT0); 3701 break; 3702 3703 default: 3704 retval = -EINVAL; 3705 dev_err(hsotg->dev, 3706 "SetPortFeature %1xh unknown or unsupported\n", 3707 wvalue); 3708 break; 3709 } 3710 break; 3711 3712 default: 3713error: 3714 retval = -EINVAL; 3715 dev_dbg(hsotg->dev, 3716 "Unknown hub control request: %1xh wIndex: %1xh wValue: %1xh\n", 3717 typereq, windex, wvalue); 3718 break; 3719 } 3720 3721 return retval; 3722} 3723 3724static int dwc2_hcd_is_status_changed(struct dwc2_hsotg *hsotg, int port) 3725{ 3726 int retval; 3727 3728 if (port != 1) 3729 return -EINVAL; 3730 3731 retval = (hsotg->flags.b.port_connect_status_change || 3732 hsotg->flags.b.port_reset_change || 3733 hsotg->flags.b.port_enable_change || 3734 hsotg->flags.b.port_suspend_change || 3735 hsotg->flags.b.port_over_current_change); 3736 3737 if (retval) { 3738 dev_dbg(hsotg->dev, 3739 "DWC OTG HCD HUB STATUS DATA: Root port status changed\n"); 3740 dev_dbg(hsotg->dev, " port_connect_status_change: %d\n", 3741 hsotg->flags.b.port_connect_status_change); 3742 dev_dbg(hsotg->dev, " port_reset_change: %d\n", 3743 hsotg->flags.b.port_reset_change); 3744 dev_dbg(hsotg->dev, " port_enable_change: %d\n", 3745 hsotg->flags.b.port_enable_change); 3746 dev_dbg(hsotg->dev, " port_suspend_change: %d\n", 3747 hsotg->flags.b.port_suspend_change); 3748 dev_dbg(hsotg->dev, " port_over_current_change: %d\n", 3749 hsotg->flags.b.port_over_current_change); 3750 } 3751 3752 return retval; 3753} 3754 3755int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg) 3756{ 3757 u32 hfnum = dwc2_readl(hsotg, HFNUM); 3758 3759#ifdef DWC2_DEBUG_SOF 3760 dev_vdbg(hsotg->dev, "DWC OTG HCD GET FRAME NUMBER %d\n", 3761 (hfnum & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT); 3762#endif 3763 return (hfnum & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT; 3764} 3765 3766int dwc2_hcd_get_future_frame_number(struct dwc2_hsotg *hsotg, int us) 3767{ 3768 u32 hprt = dwc2_readl(hsotg, HPRT0); 3769 u32 hfir = dwc2_readl(hsotg, HFIR); 3770 u32 hfnum = dwc2_readl(hsotg, HFNUM); 3771 unsigned int us_per_frame; 3772 unsigned int frame_number; 3773 unsigned int remaining; 3774 unsigned int interval; 3775 unsigned int phy_clks; 3776 3777 /* High speed has 125 us per (micro) frame; others are 1 ms per */ 3778 us_per_frame = (hprt & HPRT0_SPD_MASK) ? 1000 : 125; 3779 3780 /* Extract fields */ 3781 frame_number = (hfnum & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT; 3782 remaining = (hfnum & HFNUM_FRREM_MASK) >> HFNUM_FRREM_SHIFT; 3783 interval = (hfir & HFIR_FRINT_MASK) >> HFIR_FRINT_SHIFT; 3784 3785 /* 3786 * Number of phy clocks since the last tick of the frame number after 3787 * "us" has passed. 3788 */ 3789 phy_clks = (interval - remaining) + 3790 DIV_ROUND_UP(interval * us, us_per_frame); 3791 3792 return dwc2_frame_num_inc(frame_number, phy_clks / interval); 3793} 3794 3795int dwc2_hcd_is_b_host(struct dwc2_hsotg *hsotg) 3796{ 3797 return hsotg->op_state == OTG_STATE_B_HOST; 3798} 3799 3800static struct dwc2_hcd_urb *dwc2_hcd_urb_alloc(struct dwc2_hsotg *hsotg, 3801 int iso_desc_count, 3802 gfp_t mem_flags) 3803{ 3804 struct dwc2_hcd_urb *urb; 3805 3806 urb = kzalloc(struct_size(urb, iso_descs, iso_desc_count), mem_flags); 3807 if (urb) 3808 urb->packet_count = iso_desc_count; 3809 return urb; 3810} 3811 3812static void dwc2_hcd_urb_set_pipeinfo(struct dwc2_hsotg *hsotg, 3813 struct dwc2_hcd_urb *urb, u8 dev_addr, 3814 u8 ep_num, u8 ep_type, u8 ep_dir, 3815 u16 maxp, u16 maxp_mult) 3816{ 3817 if (dbg_perio() || 3818 ep_type == USB_ENDPOINT_XFER_BULK || 3819 ep_type == USB_ENDPOINT_XFER_CONTROL) 3820 dev_vdbg(hsotg->dev, 3821 "addr=%d, ep_num=%d, ep_dir=%1x, ep_type=%1x, maxp=%d (%d mult)\n", 3822 dev_addr, ep_num, ep_dir, ep_type, maxp, maxp_mult); 3823 urb->pipe_info.dev_addr = dev_addr; 3824 urb->pipe_info.ep_num = ep_num; 3825 urb->pipe_info.pipe_type = ep_type; 3826 urb->pipe_info.pipe_dir = ep_dir; 3827 urb->pipe_info.maxp = maxp; 3828 urb->pipe_info.maxp_mult = maxp_mult; 3829} 3830 3831/* 3832 * NOTE: This function will be removed once the peripheral controller code 3833 * is integrated and the driver is stable 3834 */ 3835void dwc2_hcd_dump_state(struct dwc2_hsotg *hsotg) 3836{ 3837#ifdef DEBUG 3838 struct dwc2_host_chan *chan; 3839 struct dwc2_hcd_urb *urb; 3840 struct dwc2_qtd *qtd; 3841 int num_channels; 3842 u32 np_tx_status; 3843 u32 p_tx_status; 3844 int i; 3845 3846 num_channels = hsotg->params.host_channels; 3847 dev_dbg(hsotg->dev, "\n"); 3848 dev_dbg(hsotg->dev, 3849 "************************************************************\n"); 3850 dev_dbg(hsotg->dev, "HCD State:\n"); 3851 dev_dbg(hsotg->dev, " Num channels: %d\n", num_channels); 3852 3853 for (i = 0; i < num_channels; i++) { 3854 chan = hsotg->hc_ptr_array[i]; 3855 dev_dbg(hsotg->dev, " Channel %d:\n", i); 3856 dev_dbg(hsotg->dev, 3857 " dev_addr: %d, ep_num: %d, ep_is_in: %d\n", 3858 chan->dev_addr, chan->ep_num, chan->ep_is_in); 3859 dev_dbg(hsotg->dev, " speed: %d\n", chan->speed); 3860 dev_dbg(hsotg->dev, " ep_type: %d\n", chan->ep_type); 3861 dev_dbg(hsotg->dev, " max_packet: %d\n", chan->max_packet); 3862 dev_dbg(hsotg->dev, " data_pid_start: %d\n", 3863 chan->data_pid_start); 3864 dev_dbg(hsotg->dev, " multi_count: %d\n", chan->multi_count); 3865 dev_dbg(hsotg->dev, " xfer_started: %d\n", 3866 chan->xfer_started); 3867 dev_dbg(hsotg->dev, " xfer_buf: %p\n", chan->xfer_buf); 3868 dev_dbg(hsotg->dev, " xfer_dma: %08lx\n", 3869 (unsigned long)chan->xfer_dma); 3870 dev_dbg(hsotg->dev, " xfer_len: %d\n", chan->xfer_len); 3871 dev_dbg(hsotg->dev, " xfer_count: %d\n", chan->xfer_count); 3872 dev_dbg(hsotg->dev, " halt_on_queue: %d\n", 3873 chan->halt_on_queue); 3874 dev_dbg(hsotg->dev, " halt_pending: %d\n", 3875 chan->halt_pending); 3876 dev_dbg(hsotg->dev, " halt_status: %d\n", chan->halt_status); 3877 dev_dbg(hsotg->dev, " do_split: %d\n", chan->do_split); 3878 dev_dbg(hsotg->dev, " complete_split: %d\n", 3879 chan->complete_split); 3880 dev_dbg(hsotg->dev, " hub_addr: %d\n", chan->hub_addr); 3881 dev_dbg(hsotg->dev, " hub_port: %d\n", chan->hub_port); 3882 dev_dbg(hsotg->dev, " xact_pos: %d\n", chan->xact_pos); 3883 dev_dbg(hsotg->dev, " requests: %d\n", chan->requests); 3884 dev_dbg(hsotg->dev, " qh: %p\n", chan->qh); 3885 3886 if (chan->xfer_started) { 3887 u32 hfnum, hcchar, hctsiz, hcint, hcintmsk; 3888 3889 hfnum = dwc2_readl(hsotg, HFNUM); 3890 hcchar = dwc2_readl(hsotg, HCCHAR(i)); 3891 hctsiz = dwc2_readl(hsotg, HCTSIZ(i)); 3892 hcint = dwc2_readl(hsotg, HCINT(i)); 3893 hcintmsk = dwc2_readl(hsotg, HCINTMSK(i)); 3894 dev_dbg(hsotg->dev, " hfnum: 0x%08x\n", hfnum); 3895 dev_dbg(hsotg->dev, " hcchar: 0x%08x\n", hcchar); 3896 dev_dbg(hsotg->dev, " hctsiz: 0x%08x\n", hctsiz); 3897 dev_dbg(hsotg->dev, " hcint: 0x%08x\n", hcint); 3898 dev_dbg(hsotg->dev, " hcintmsk: 0x%08x\n", hcintmsk); 3899 } 3900 3901 if (!(chan->xfer_started && chan->qh)) 3902 continue; 3903 3904 list_for_each_entry(qtd, &chan->qh->qtd_list, qtd_list_entry) { 3905 if (!qtd->in_process) 3906 break; 3907 urb = qtd->urb; 3908 dev_dbg(hsotg->dev, " URB Info:\n"); 3909 dev_dbg(hsotg->dev, " qtd: %p, urb: %p\n", 3910 qtd, urb); 3911 if (urb) { 3912 dev_dbg(hsotg->dev, 3913 " Dev: %d, EP: %d %s\n", 3914 dwc2_hcd_get_dev_addr(&urb->pipe_info), 3915 dwc2_hcd_get_ep_num(&urb->pipe_info), 3916 dwc2_hcd_is_pipe_in(&urb->pipe_info) ? 3917 "IN" : "OUT"); 3918 dev_dbg(hsotg->dev, 3919 " Max packet size: %d (%d mult)\n", 3920 dwc2_hcd_get_maxp(&urb->pipe_info), 3921 dwc2_hcd_get_maxp_mult(&urb->pipe_info)); 3922 dev_dbg(hsotg->dev, 3923 " transfer_buffer: %p\n", 3924 urb->buf); 3925 dev_dbg(hsotg->dev, 3926 " transfer_dma: %08lx\n", 3927 (unsigned long)urb->dma); 3928 dev_dbg(hsotg->dev, 3929 " transfer_buffer_length: %d\n", 3930 urb->length); 3931 dev_dbg(hsotg->dev, " actual_length: %d\n", 3932 urb->actual_length); 3933 } 3934 } 3935 } 3936 3937 dev_dbg(hsotg->dev, " non_periodic_channels: %d\n", 3938 hsotg->non_periodic_channels); 3939 dev_dbg(hsotg->dev, " periodic_channels: %d\n", 3940 hsotg->periodic_channels); 3941 dev_dbg(hsotg->dev, " periodic_usecs: %d\n", hsotg->periodic_usecs); 3942 np_tx_status = dwc2_readl(hsotg, GNPTXSTS); 3943 dev_dbg(hsotg->dev, " NP Tx Req Queue Space Avail: %d\n", 3944 (np_tx_status & TXSTS_QSPCAVAIL_MASK) >> TXSTS_QSPCAVAIL_SHIFT); 3945 dev_dbg(hsotg->dev, " NP Tx FIFO Space Avail: %d\n", 3946 (np_tx_status & TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT); 3947 p_tx_status = dwc2_readl(hsotg, HPTXSTS); 3948 dev_dbg(hsotg->dev, " P Tx Req Queue Space Avail: %d\n", 3949 (p_tx_status & TXSTS_QSPCAVAIL_MASK) >> TXSTS_QSPCAVAIL_SHIFT); 3950 dev_dbg(hsotg->dev, " P Tx FIFO Space Avail: %d\n", 3951 (p_tx_status & TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT); 3952 dwc2_dump_global_registers(hsotg); 3953 dwc2_dump_host_registers(hsotg); 3954 dev_dbg(hsotg->dev, 3955 "************************************************************\n"); 3956 dev_dbg(hsotg->dev, "\n"); 3957#endif 3958} 3959 3960struct wrapper_priv_data { 3961 struct dwc2_hsotg *hsotg; 3962}; 3963 3964/* Gets the dwc2_hsotg from a usb_hcd */ 3965static struct dwc2_hsotg *dwc2_hcd_to_hsotg(struct usb_hcd *hcd) 3966{ 3967 struct wrapper_priv_data *p; 3968 3969 p = (struct wrapper_priv_data *)&hcd->hcd_priv; 3970 return p->hsotg; 3971} 3972 3973/** 3974 * dwc2_host_get_tt_info() - Get the dwc2_tt associated with context 3975 * 3976 * This will get the dwc2_tt structure (and ttport) associated with the given 3977 * context (which is really just a struct urb pointer). 3978 * 3979 * The first time this is called for a given TT we allocate memory for our 3980 * structure. When everyone is done and has called dwc2_host_put_tt_info() 3981 * then the refcount for the structure will go to 0 and we'll free it. 3982 * 3983 * @hsotg: The HCD state structure for the DWC OTG controller. 3984 * @context: The priv pointer from a struct dwc2_hcd_urb. 3985 * @mem_flags: Flags for allocating memory. 3986 * @ttport: We'll return this device's port number here. That's used to 3987 * reference into the bitmap if we're on a multi_tt hub. 3988 * 3989 * Return: a pointer to a struct dwc2_tt. Don't forget to call 3990 * dwc2_host_put_tt_info()! Returns NULL upon memory alloc failure. 3991 */ 3992 3993struct dwc2_tt *dwc2_host_get_tt_info(struct dwc2_hsotg *hsotg, void *context, 3994 gfp_t mem_flags, int *ttport) 3995{ 3996 struct urb *urb = context; 3997 struct dwc2_tt *dwc_tt = NULL; 3998 3999 if (urb->dev->tt) { 4000 *ttport = urb->dev->ttport; 4001 4002 dwc_tt = urb->dev->tt->hcpriv; 4003 if (!dwc_tt) { 4004 size_t bitmap_size; 4005 4006 /* 4007 * For single_tt we need one schedule. For multi_tt 4008 * we need one per port. 4009 */ 4010 bitmap_size = DWC2_ELEMENTS_PER_LS_BITMAP * 4011 sizeof(dwc_tt->periodic_bitmaps[0]); 4012 if (urb->dev->tt->multi) 4013 bitmap_size *= urb->dev->tt->hub->maxchild; 4014 4015 dwc_tt = kzalloc(sizeof(*dwc_tt) + bitmap_size, 4016 mem_flags); 4017 if (!dwc_tt) 4018 return NULL; 4019 4020 dwc_tt->usb_tt = urb->dev->tt; 4021 dwc_tt->usb_tt->hcpriv = dwc_tt; 4022 } 4023 4024 dwc_tt->refcount++; 4025 } 4026 4027 return dwc_tt; 4028} 4029 4030/** 4031 * dwc2_host_put_tt_info() - Put the dwc2_tt from dwc2_host_get_tt_info() 4032 * 4033 * Frees resources allocated by dwc2_host_get_tt_info() if all current holders 4034 * of the structure are done. 4035 * 4036 * It's OK to call this with NULL. 4037 * 4038 * @hsotg: The HCD state structure for the DWC OTG controller. 4039 * @dwc_tt: The pointer returned by dwc2_host_get_tt_info. 4040 */ 4041void dwc2_host_put_tt_info(struct dwc2_hsotg *hsotg, struct dwc2_tt *dwc_tt) 4042{ 4043 /* Model kfree and make put of NULL a no-op */ 4044 if (!dwc_tt) 4045 return; 4046 4047 WARN_ON(dwc_tt->refcount < 1); 4048 4049 dwc_tt->refcount--; 4050 if (!dwc_tt->refcount) { 4051 dwc_tt->usb_tt->hcpriv = NULL; 4052 kfree(dwc_tt); 4053 } 4054} 4055 4056int dwc2_host_get_speed(struct dwc2_hsotg *hsotg, void *context) 4057{ 4058 struct urb *urb = context; 4059 4060 return urb->dev->speed; 4061} 4062 4063static void dwc2_allocate_bus_bandwidth(struct usb_hcd *hcd, u16 bw, 4064 struct urb *urb) 4065{ 4066 struct usb_bus *bus = hcd_to_bus(hcd); 4067 4068 if (urb->interval) 4069 bus->bandwidth_allocated += bw / urb->interval; 4070 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) 4071 bus->bandwidth_isoc_reqs++; 4072 else 4073 bus->bandwidth_int_reqs++; 4074} 4075 4076static void dwc2_free_bus_bandwidth(struct usb_hcd *hcd, u16 bw, 4077 struct urb *urb) 4078{ 4079 struct usb_bus *bus = hcd_to_bus(hcd); 4080 4081 if (urb->interval) 4082 bus->bandwidth_allocated -= bw / urb->interval; 4083 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) 4084 bus->bandwidth_isoc_reqs--; 4085 else 4086 bus->bandwidth_int_reqs--; 4087} 4088 4089/* 4090 * Sets the final status of an URB and returns it to the upper layer. Any 4091 * required cleanup of the URB is performed. 4092 * 4093 * Must be called with interrupt disabled and spinlock held 4094 */ 4095void dwc2_host_complete(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd, 4096 int status) 4097{ 4098 struct urb *urb; 4099 int i; 4100 4101 if (!qtd) { 4102 dev_dbg(hsotg->dev, "## %s: qtd is NULL ##\n", __func__); 4103 return; 4104 } 4105 4106 if (!qtd->urb) { 4107 dev_dbg(hsotg->dev, "## %s: qtd->urb is NULL ##\n", __func__); 4108 return; 4109 } 4110 4111 urb = qtd->urb->priv; 4112 if (!urb) { 4113 dev_dbg(hsotg->dev, "## %s: urb->priv is NULL ##\n", __func__); 4114 return; 4115 } 4116 4117 urb->actual_length = dwc2_hcd_urb_get_actual_length(qtd->urb); 4118 4119 if (dbg_urb(urb)) 4120 dev_vdbg(hsotg->dev, 4121 "%s: urb %p device %d ep %d-%s status %d actual %d\n", 4122 __func__, urb, usb_pipedevice(urb->pipe), 4123 usb_pipeendpoint(urb->pipe), 4124 usb_pipein(urb->pipe) ? "IN" : "OUT", status, 4125 urb->actual_length); 4126 4127 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { 4128 urb->error_count = dwc2_hcd_urb_get_error_count(qtd->urb); 4129 for (i = 0; i < urb->number_of_packets; ++i) { 4130 urb->iso_frame_desc[i].actual_length = 4131 dwc2_hcd_urb_get_iso_desc_actual_length( 4132 qtd->urb, i); 4133 urb->iso_frame_desc[i].status = 4134 dwc2_hcd_urb_get_iso_desc_status(qtd->urb, i); 4135 } 4136 } 4137 4138 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS && dbg_perio()) { 4139 for (i = 0; i < urb->number_of_packets; i++) 4140 dev_vdbg(hsotg->dev, " ISO Desc %d status %d\n", 4141 i, urb->iso_frame_desc[i].status); 4142 } 4143 4144 urb->status = status; 4145 if (!status) { 4146 if ((urb->transfer_flags & URB_SHORT_NOT_OK) && 4147 urb->actual_length < urb->transfer_buffer_length) 4148 urb->status = -EREMOTEIO; 4149 } 4150 4151 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS || 4152 usb_pipetype(urb->pipe) == PIPE_INTERRUPT) { 4153 struct usb_host_endpoint *ep = urb->ep; 4154 4155 if (ep) 4156 dwc2_free_bus_bandwidth(dwc2_hsotg_to_hcd(hsotg), 4157 dwc2_hcd_get_ep_bandwidth(hsotg, ep), 4158 urb); 4159 } 4160 4161 usb_hcd_unlink_urb_from_ep(dwc2_hsotg_to_hcd(hsotg), urb); 4162 urb->hcpriv = NULL; 4163 kfree(qtd->urb); 4164 qtd->urb = NULL; 4165 4166 usb_hcd_giveback_urb(dwc2_hsotg_to_hcd(hsotg), urb, status); 4167} 4168 4169/* 4170 * Work queue function for starting the HCD when A-Cable is connected 4171 */ 4172static void dwc2_hcd_start_func(struct work_struct *work) 4173{ 4174 struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg, 4175 start_work.work); 4176 4177 dev_dbg(hsotg->dev, "%s() %p\n", __func__, hsotg); 4178 dwc2_host_start(hsotg); 4179} 4180 4181/* 4182 * Reset work queue function 4183 */ 4184static void dwc2_hcd_reset_func(struct work_struct *work) 4185{ 4186 struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg, 4187 reset_work.work); 4188 unsigned long flags; 4189 u32 hprt0; 4190 4191 dev_dbg(hsotg->dev, "USB RESET function called\n"); 4192 4193 spin_lock_irqsave(&hsotg->lock, flags); 4194 4195 hprt0 = dwc2_read_hprt0(hsotg); 4196 hprt0 &= ~HPRT0_RST; 4197 dwc2_writel(hsotg, hprt0, HPRT0); 4198 hsotg->flags.b.port_reset_change = 1; 4199 4200 spin_unlock_irqrestore(&hsotg->lock, flags); 4201} 4202 4203static void dwc2_hcd_phy_reset_func(struct work_struct *work) 4204{ 4205 struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg, 4206 phy_reset_work); 4207 int ret; 4208 4209 ret = phy_reset(hsotg->phy); 4210 if (ret) 4211 dev_warn(hsotg->dev, "PHY reset failed\n"); 4212} 4213 4214/* 4215 * ========================================================================= 4216 * Linux HC Driver Functions 4217 * ========================================================================= 4218 */ 4219 4220/* 4221 * Initializes the DWC_otg controller and its root hub and prepares it for host 4222 * mode operation. Activates the root port. Returns 0 on success and a negative 4223 * error code on failure. 4224 */ 4225static int _dwc2_hcd_start(struct usb_hcd *hcd) 4226{ 4227 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4228 struct usb_bus *bus = hcd_to_bus(hcd); 4229 unsigned long flags; 4230 u32 hprt0; 4231 int ret; 4232 4233 dev_dbg(hsotg->dev, "DWC OTG HCD START\n"); 4234 4235 spin_lock_irqsave(&hsotg->lock, flags); 4236 hsotg->lx_state = DWC2_L0; 4237 hcd->state = HC_STATE_RUNNING; 4238 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); 4239 4240 if (dwc2_is_device_mode(hsotg)) { 4241 spin_unlock_irqrestore(&hsotg->lock, flags); 4242 return 0; /* why 0 ?? */ 4243 } 4244 4245 dwc2_hcd_reinit(hsotg); 4246 4247 hprt0 = dwc2_read_hprt0(hsotg); 4248 /* Has vbus power been turned on in dwc2_core_host_init ? */ 4249 if (hprt0 & HPRT0_PWR) { 4250 /* Enable external vbus supply before resuming root hub */ 4251 spin_unlock_irqrestore(&hsotg->lock, flags); 4252 ret = dwc2_vbus_supply_init(hsotg); 4253 if (ret) 4254 return ret; 4255 spin_lock_irqsave(&hsotg->lock, flags); 4256 } 4257 4258 /* Initialize and connect root hub if one is not already attached */ 4259 if (bus->root_hub) { 4260 dev_dbg(hsotg->dev, "DWC OTG HCD Has Root Hub\n"); 4261 /* Inform the HUB driver to resume */ 4262 usb_hcd_resume_root_hub(hcd); 4263 } 4264 4265 spin_unlock_irqrestore(&hsotg->lock, flags); 4266 4267 return 0; 4268} 4269 4270/* 4271 * Halts the DWC_otg host mode operations in a clean manner. USB transfers are 4272 * stopped. 4273 */ 4274static void _dwc2_hcd_stop(struct usb_hcd *hcd) 4275{ 4276 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4277 unsigned long flags; 4278 u32 hprt0; 4279 4280 /* Turn off all host-specific interrupts */ 4281 dwc2_disable_host_interrupts(hsotg); 4282 4283 /* Wait for interrupt processing to finish */ 4284 synchronize_irq(hcd->irq); 4285 4286 spin_lock_irqsave(&hsotg->lock, flags); 4287 hprt0 = dwc2_read_hprt0(hsotg); 4288 /* Ensure hcd is disconnected */ 4289 dwc2_hcd_disconnect(hsotg, true); 4290 dwc2_hcd_stop(hsotg); 4291 hsotg->lx_state = DWC2_L3; 4292 hcd->state = HC_STATE_HALT; 4293 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); 4294 spin_unlock_irqrestore(&hsotg->lock, flags); 4295 4296 /* keep balanced supply init/exit by checking HPRT0_PWR */ 4297 if (hprt0 & HPRT0_PWR) 4298 dwc2_vbus_supply_exit(hsotg); 4299 4300 usleep_range(1000, 3000); 4301} 4302 4303static int _dwc2_hcd_suspend(struct usb_hcd *hcd) 4304{ 4305 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4306 unsigned long flags; 4307 int ret = 0; 4308 u32 hprt0; 4309 u32 pcgctl; 4310 4311 spin_lock_irqsave(&hsotg->lock, flags); 4312 4313 if (dwc2_is_device_mode(hsotg)) 4314 goto unlock; 4315 4316 if (hsotg->lx_state != DWC2_L0) 4317 goto unlock; 4318 4319 if (!HCD_HW_ACCESSIBLE(hcd)) 4320 goto unlock; 4321 4322 if (hsotg->op_state == OTG_STATE_B_PERIPHERAL) 4323 goto unlock; 4324 4325 if (hsotg->params.power_down != DWC2_POWER_DOWN_PARAM_PARTIAL || 4326 hsotg->flags.b.port_connect_status == 0) 4327 goto skip_power_saving; 4328 4329 /* 4330 * Drive USB suspend and disable port Power 4331 * if usb bus is not suspended. 4332 */ 4333 if (!hsotg->bus_suspended) { 4334 hprt0 = dwc2_read_hprt0(hsotg); 4335 if (hprt0 & HPRT0_CONNSTS) { 4336 hprt0 |= HPRT0_SUSP; 4337 if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_PARTIAL) 4338 hprt0 &= ~HPRT0_PWR; 4339 dwc2_writel(hsotg, hprt0, HPRT0); 4340 } 4341 if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_PARTIAL) { 4342 spin_unlock_irqrestore(&hsotg->lock, flags); 4343 dwc2_vbus_supply_exit(hsotg); 4344 spin_lock_irqsave(&hsotg->lock, flags); 4345 } else { 4346 pcgctl = readl(hsotg->regs + PCGCTL); 4347 pcgctl |= PCGCTL_STOPPCLK; 4348 writel(pcgctl, hsotg->regs + PCGCTL); 4349 } 4350 } 4351 4352 if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_PARTIAL) { 4353 /* Enter partial_power_down */ 4354 ret = dwc2_enter_partial_power_down(hsotg); 4355 if (ret) { 4356 if (ret != -ENOTSUPP) 4357 dev_err(hsotg->dev, 4358 "enter partial_power_down failed\n"); 4359 goto skip_power_saving; 4360 } 4361 4362 /* After entering partial_power_down, hardware is no more accessible */ 4363 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); 4364 } 4365 4366 /* Ask phy to be suspended */ 4367 if (!IS_ERR_OR_NULL(hsotg->uphy)) { 4368 spin_unlock_irqrestore(&hsotg->lock, flags); 4369 usb_phy_set_suspend(hsotg->uphy, true); 4370 spin_lock_irqsave(&hsotg->lock, flags); 4371 } 4372 4373skip_power_saving: 4374 hsotg->lx_state = DWC2_L2; 4375unlock: 4376 spin_unlock_irqrestore(&hsotg->lock, flags); 4377 4378 return ret; 4379} 4380 4381static int _dwc2_hcd_resume(struct usb_hcd *hcd) 4382{ 4383 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4384 unsigned long flags; 4385 u32 pcgctl; 4386 int ret = 0; 4387 4388 spin_lock_irqsave(&hsotg->lock, flags); 4389 4390 if (dwc2_is_device_mode(hsotg)) 4391 goto unlock; 4392 4393 if (hsotg->lx_state != DWC2_L2) 4394 goto unlock; 4395 4396 if (hsotg->params.power_down > DWC2_POWER_DOWN_PARAM_PARTIAL) { 4397 hsotg->lx_state = DWC2_L0; 4398 goto unlock; 4399 } 4400 4401 /* 4402 * Enable power if not already done. 4403 * This must not be spinlocked since duration 4404 * of this call is unknown. 4405 */ 4406 if (!IS_ERR_OR_NULL(hsotg->uphy)) { 4407 spin_unlock_irqrestore(&hsotg->lock, flags); 4408 usb_phy_set_suspend(hsotg->uphy, false); 4409 spin_lock_irqsave(&hsotg->lock, flags); 4410 } 4411 4412 if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_PARTIAL) { 4413 /* 4414 * Set HW accessible bit before powering on the controller 4415 * since an interrupt may rise. 4416 */ 4417 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); 4418 4419 4420 /* Exit partial_power_down */ 4421 ret = dwc2_exit_partial_power_down(hsotg, true); 4422 if (ret && (ret != -ENOTSUPP)) 4423 dev_err(hsotg->dev, "exit partial_power_down failed\n"); 4424 } else { 4425 pcgctl = readl(hsotg->regs + PCGCTL); 4426 pcgctl &= ~PCGCTL_STOPPCLK; 4427 writel(pcgctl, hsotg->regs + PCGCTL); 4428 } 4429 4430 hsotg->lx_state = DWC2_L0; 4431 4432 spin_unlock_irqrestore(&hsotg->lock, flags); 4433 4434 if (hsotg->bus_suspended) { 4435 spin_lock_irqsave(&hsotg->lock, flags); 4436 hsotg->flags.b.port_suspend_change = 1; 4437 spin_unlock_irqrestore(&hsotg->lock, flags); 4438 dwc2_port_resume(hsotg); 4439 } else { 4440 if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_PARTIAL) { 4441 dwc2_vbus_supply_init(hsotg); 4442 4443 /* Wait for controller to correctly update D+/D- level */ 4444 usleep_range(3000, 5000); 4445 } 4446 4447 /* 4448 * Clear Port Enable and Port Status changes. 4449 * Enable Port Power. 4450 */ 4451 dwc2_writel(hsotg, HPRT0_PWR | HPRT0_CONNDET | 4452 HPRT0_ENACHG, HPRT0); 4453 /* Wait for controller to detect Port Connect */ 4454 usleep_range(5000, 7000); 4455 } 4456 4457 return ret; 4458unlock: 4459 spin_unlock_irqrestore(&hsotg->lock, flags); 4460 4461 return ret; 4462} 4463 4464/* Returns the current frame number */ 4465static int _dwc2_hcd_get_frame_number(struct usb_hcd *hcd) 4466{ 4467 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4468 4469 return dwc2_hcd_get_frame_number(hsotg); 4470} 4471 4472static void dwc2_dump_urb_info(struct usb_hcd *hcd, struct urb *urb, 4473 char *fn_name) 4474{ 4475#ifdef VERBOSE_DEBUG 4476 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4477 char *pipetype = NULL; 4478 char *speed = NULL; 4479 4480 dev_vdbg(hsotg->dev, "%s, urb %p\n", fn_name, urb); 4481 dev_vdbg(hsotg->dev, " Device address: %d\n", 4482 usb_pipedevice(urb->pipe)); 4483 dev_vdbg(hsotg->dev, " Endpoint: %d, %s\n", 4484 usb_pipeendpoint(urb->pipe), 4485 usb_pipein(urb->pipe) ? "IN" : "OUT"); 4486 4487 switch (usb_pipetype(urb->pipe)) { 4488 case PIPE_CONTROL: 4489 pipetype = "CONTROL"; 4490 break; 4491 case PIPE_BULK: 4492 pipetype = "BULK"; 4493 break; 4494 case PIPE_INTERRUPT: 4495 pipetype = "INTERRUPT"; 4496 break; 4497 case PIPE_ISOCHRONOUS: 4498 pipetype = "ISOCHRONOUS"; 4499 break; 4500 } 4501 4502 dev_vdbg(hsotg->dev, " Endpoint type: %s %s (%s)\n", pipetype, 4503 usb_urb_dir_in(urb) ? "IN" : "OUT", usb_pipein(urb->pipe) ? 4504 "IN" : "OUT"); 4505 4506 switch (urb->dev->speed) { 4507 case USB_SPEED_HIGH: 4508 speed = "HIGH"; 4509 break; 4510 case USB_SPEED_FULL: 4511 speed = "FULL"; 4512 break; 4513 case USB_SPEED_LOW: 4514 speed = "LOW"; 4515 break; 4516 default: 4517 speed = "UNKNOWN"; 4518 break; 4519 } 4520 4521 dev_vdbg(hsotg->dev, " Speed: %s\n", speed); 4522 dev_vdbg(hsotg->dev, " Max packet size: %d (%d mult)\n", 4523 usb_endpoint_maxp(&urb->ep->desc), 4524 usb_endpoint_maxp_mult(&urb->ep->desc)); 4525 4526 dev_vdbg(hsotg->dev, " Data buffer length: %d\n", 4527 urb->transfer_buffer_length); 4528 dev_vdbg(hsotg->dev, " Transfer buffer: %p, Transfer DMA: %08lx\n", 4529 urb->transfer_buffer, (unsigned long)urb->transfer_dma); 4530 dev_vdbg(hsotg->dev, " Setup buffer: %p, Setup DMA: %08lx\n", 4531 urb->setup_packet, (unsigned long)urb->setup_dma); 4532 dev_vdbg(hsotg->dev, " Interval: %d\n", urb->interval); 4533 4534 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { 4535 int i; 4536 4537 for (i = 0; i < urb->number_of_packets; i++) { 4538 dev_vdbg(hsotg->dev, " ISO Desc %d:\n", i); 4539 dev_vdbg(hsotg->dev, " offset: %d, length %d\n", 4540 urb->iso_frame_desc[i].offset, 4541 urb->iso_frame_desc[i].length); 4542 } 4543 } 4544#endif 4545} 4546 4547/* 4548 * Starts processing a USB transfer request specified by a USB Request Block 4549 * (URB). mem_flags indicates the type of memory allocation to use while 4550 * processing this URB. 4551 */ 4552static int _dwc2_hcd_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, 4553 gfp_t mem_flags) 4554{ 4555 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4556 struct usb_host_endpoint *ep = urb->ep; 4557 struct dwc2_hcd_urb *dwc2_urb; 4558 int i; 4559 int retval; 4560 int alloc_bandwidth = 0; 4561 u8 ep_type = 0; 4562 u32 tflags = 0; 4563 void *buf; 4564 unsigned long flags; 4565 struct dwc2_qh *qh; 4566 bool qh_allocated = false; 4567 struct dwc2_qtd *qtd; 4568 4569 if (dbg_urb(urb)) { 4570 dev_vdbg(hsotg->dev, "DWC OTG HCD URB Enqueue\n"); 4571 dwc2_dump_urb_info(hcd, urb, "urb_enqueue"); 4572 } 4573 4574 if (!ep) 4575 return -EINVAL; 4576 4577 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS || 4578 usb_pipetype(urb->pipe) == PIPE_INTERRUPT) { 4579 spin_lock_irqsave(&hsotg->lock, flags); 4580 if (!dwc2_hcd_is_bandwidth_allocated(hsotg, ep)) 4581 alloc_bandwidth = 1; 4582 spin_unlock_irqrestore(&hsotg->lock, flags); 4583 } 4584 4585 switch (usb_pipetype(urb->pipe)) { 4586 case PIPE_CONTROL: 4587 ep_type = USB_ENDPOINT_XFER_CONTROL; 4588 break; 4589 case PIPE_ISOCHRONOUS: 4590 ep_type = USB_ENDPOINT_XFER_ISOC; 4591 break; 4592 case PIPE_BULK: 4593 ep_type = USB_ENDPOINT_XFER_BULK; 4594 break; 4595 case PIPE_INTERRUPT: 4596 ep_type = USB_ENDPOINT_XFER_INT; 4597 break; 4598 } 4599 4600 dwc2_urb = dwc2_hcd_urb_alloc(hsotg, urb->number_of_packets, 4601 mem_flags); 4602 if (!dwc2_urb) 4603 return -ENOMEM; 4604 4605 dwc2_hcd_urb_set_pipeinfo(hsotg, dwc2_urb, usb_pipedevice(urb->pipe), 4606 usb_pipeendpoint(urb->pipe), ep_type, 4607 usb_pipein(urb->pipe), 4608 usb_endpoint_maxp(&ep->desc), 4609 usb_endpoint_maxp_mult(&ep->desc)); 4610 4611 buf = urb->transfer_buffer; 4612 4613 if (hcd_uses_dma(hcd)) { 4614 if (!buf && (urb->transfer_dma & 3)) { 4615 dev_err(hsotg->dev, 4616 "%s: unaligned transfer with no transfer_buffer", 4617 __func__); 4618 retval = -EINVAL; 4619 goto fail0; 4620 } 4621 } 4622 4623 if (!(urb->transfer_flags & URB_NO_INTERRUPT)) 4624 tflags |= URB_GIVEBACK_ASAP; 4625 if (urb->transfer_flags & URB_ZERO_PACKET) 4626 tflags |= URB_SEND_ZERO_PACKET; 4627 4628 dwc2_urb->priv = urb; 4629 dwc2_urb->buf = buf; 4630 dwc2_urb->dma = urb->transfer_dma; 4631 dwc2_urb->length = urb->transfer_buffer_length; 4632 dwc2_urb->setup_packet = urb->setup_packet; 4633 dwc2_urb->setup_dma = urb->setup_dma; 4634 dwc2_urb->flags = tflags; 4635 dwc2_urb->interval = urb->interval; 4636 dwc2_urb->status = -EINPROGRESS; 4637 4638 for (i = 0; i < urb->number_of_packets; ++i) 4639 dwc2_hcd_urb_set_iso_desc_params(dwc2_urb, i, 4640 urb->iso_frame_desc[i].offset, 4641 urb->iso_frame_desc[i].length); 4642 4643 urb->hcpriv = dwc2_urb; 4644 qh = (struct dwc2_qh *)ep->hcpriv; 4645 /* Create QH for the endpoint if it doesn't exist */ 4646 if (!qh) { 4647 qh = dwc2_hcd_qh_create(hsotg, dwc2_urb, mem_flags); 4648 if (!qh) { 4649 retval = -ENOMEM; 4650 goto fail0; 4651 } 4652 ep->hcpriv = qh; 4653 qh_allocated = true; 4654 } 4655 4656 qtd = kzalloc(sizeof(*qtd), mem_flags); 4657 if (!qtd) { 4658 retval = -ENOMEM; 4659 goto fail1; 4660 } 4661 4662 spin_lock_irqsave(&hsotg->lock, flags); 4663 retval = usb_hcd_link_urb_to_ep(hcd, urb); 4664 if (retval) 4665 goto fail2; 4666 4667 retval = dwc2_hcd_urb_enqueue(hsotg, dwc2_urb, qh, qtd); 4668 if (retval) 4669 goto fail3; 4670 4671 if (alloc_bandwidth) { 4672 dwc2_allocate_bus_bandwidth(hcd, 4673 dwc2_hcd_get_ep_bandwidth(hsotg, ep), 4674 urb); 4675 } 4676 4677 spin_unlock_irqrestore(&hsotg->lock, flags); 4678 4679 return 0; 4680 4681fail3: 4682 dwc2_urb->priv = NULL; 4683 usb_hcd_unlink_urb_from_ep(hcd, urb); 4684 if (qh_allocated && qh->channel && qh->channel->qh == qh) 4685 qh->channel->qh = NULL; 4686fail2: 4687 urb->hcpriv = NULL; 4688 spin_unlock_irqrestore(&hsotg->lock, flags); 4689 kfree(qtd); 4690fail1: 4691 if (qh_allocated) { 4692 struct dwc2_qtd *qtd2, *qtd2_tmp; 4693 4694 ep->hcpriv = NULL; 4695 dwc2_hcd_qh_unlink(hsotg, qh); 4696 /* Free each QTD in the QH's QTD list */ 4697 list_for_each_entry_safe(qtd2, qtd2_tmp, &qh->qtd_list, 4698 qtd_list_entry) 4699 dwc2_hcd_qtd_unlink_and_free(hsotg, qtd2, qh); 4700 dwc2_hcd_qh_free(hsotg, qh); 4701 } 4702fail0: 4703 kfree(dwc2_urb); 4704 4705 return retval; 4706} 4707 4708/* 4709 * Aborts/cancels a USB transfer request. Always returns 0 to indicate success. 4710 */ 4711static int _dwc2_hcd_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, 4712 int status) 4713{ 4714 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4715 int rc; 4716 unsigned long flags; 4717 4718 dev_dbg(hsotg->dev, "DWC OTG HCD URB Dequeue\n"); 4719 dwc2_dump_urb_info(hcd, urb, "urb_dequeue"); 4720 4721 spin_lock_irqsave(&hsotg->lock, flags); 4722 4723 rc = usb_hcd_check_unlink_urb(hcd, urb, status); 4724 if (rc) 4725 goto out; 4726 4727 if (!urb->hcpriv) { 4728 dev_dbg(hsotg->dev, "## urb->hcpriv is NULL ##\n"); 4729 goto out; 4730 } 4731 4732 rc = dwc2_hcd_urb_dequeue(hsotg, urb->hcpriv); 4733 4734 usb_hcd_unlink_urb_from_ep(hcd, urb); 4735 4736 kfree(urb->hcpriv); 4737 urb->hcpriv = NULL; 4738 4739 /* Higher layer software sets URB status */ 4740 spin_unlock(&hsotg->lock); 4741 usb_hcd_giveback_urb(hcd, urb, status); 4742 spin_lock(&hsotg->lock); 4743 4744 dev_dbg(hsotg->dev, "Called usb_hcd_giveback_urb()\n"); 4745 dev_dbg(hsotg->dev, " urb->status = %d\n", urb->status); 4746out: 4747 spin_unlock_irqrestore(&hsotg->lock, flags); 4748 4749 return rc; 4750} 4751 4752/* 4753 * Frees resources in the DWC_otg controller related to a given endpoint. Also 4754 * clears state in the HCD related to the endpoint. Any URBs for the endpoint 4755 * must already be dequeued. 4756 */ 4757static void _dwc2_hcd_endpoint_disable(struct usb_hcd *hcd, 4758 struct usb_host_endpoint *ep) 4759{ 4760 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4761 4762 dev_dbg(hsotg->dev, 4763 "DWC OTG HCD EP DISABLE: bEndpointAddress=0x%02x, ep->hcpriv=%p\n", 4764 ep->desc.bEndpointAddress, ep->hcpriv); 4765 dwc2_hcd_endpoint_disable(hsotg, ep, 250); 4766} 4767 4768/* 4769 * Resets endpoint specific parameter values, in current version used to reset 4770 * the data toggle (as a WA). This function can be called from usb_clear_halt 4771 * routine. 4772 */ 4773static void _dwc2_hcd_endpoint_reset(struct usb_hcd *hcd, 4774 struct usb_host_endpoint *ep) 4775{ 4776 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4777 unsigned long flags; 4778 4779 dev_dbg(hsotg->dev, 4780 "DWC OTG HCD EP RESET: bEndpointAddress=0x%02x\n", 4781 ep->desc.bEndpointAddress); 4782 4783 spin_lock_irqsave(&hsotg->lock, flags); 4784 dwc2_hcd_endpoint_reset(hsotg, ep); 4785 spin_unlock_irqrestore(&hsotg->lock, flags); 4786} 4787 4788/* 4789 * Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if 4790 * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid 4791 * interrupt. 4792 * 4793 * This function is called by the USB core when an interrupt occurs 4794 */ 4795static irqreturn_t _dwc2_hcd_irq(struct usb_hcd *hcd) 4796{ 4797 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4798 4799 return dwc2_handle_hcd_intr(hsotg); 4800} 4801 4802/* 4803 * Creates Status Change bitmap for the root hub and root port. The bitmap is 4804 * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1 4805 * is the status change indicator for the single root port. Returns 1 if either 4806 * change indicator is 1, otherwise returns 0. 4807 */ 4808static int _dwc2_hcd_hub_status_data(struct usb_hcd *hcd, char *buf) 4809{ 4810 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4811 4812 buf[0] = dwc2_hcd_is_status_changed(hsotg, 1) << 1; 4813 return buf[0] != 0; 4814} 4815 4816/* Handles hub class-specific requests */ 4817static int _dwc2_hcd_hub_control(struct usb_hcd *hcd, u16 typereq, u16 wvalue, 4818 u16 windex, char *buf, u16 wlength) 4819{ 4820 int retval = dwc2_hcd_hub_control(dwc2_hcd_to_hsotg(hcd), typereq, 4821 wvalue, windex, buf, wlength); 4822 return retval; 4823} 4824 4825/* Handles hub TT buffer clear completions */ 4826static void _dwc2_hcd_clear_tt_buffer_complete(struct usb_hcd *hcd, 4827 struct usb_host_endpoint *ep) 4828{ 4829 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4830 struct dwc2_qh *qh; 4831 unsigned long flags; 4832 4833 qh = ep->hcpriv; 4834 if (!qh) 4835 return; 4836 4837 spin_lock_irqsave(&hsotg->lock, flags); 4838 qh->tt_buffer_dirty = 0; 4839 4840 if (hsotg->flags.b.port_connect_status) 4841 dwc2_hcd_queue_transactions(hsotg, DWC2_TRANSACTION_ALL); 4842 4843 spin_unlock_irqrestore(&hsotg->lock, flags); 4844} 4845 4846/* 4847 * HPRT0_SPD_HIGH_SPEED: high speed 4848 * HPRT0_SPD_FULL_SPEED: full speed 4849 */ 4850static void dwc2_change_bus_speed(struct usb_hcd *hcd, int speed) 4851{ 4852 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4853 4854 if (hsotg->params.speed == speed) 4855 return; 4856 4857 hsotg->params.speed = speed; 4858 queue_work(hsotg->wq_otg, &hsotg->wf_otg); 4859} 4860 4861static void dwc2_free_dev(struct usb_hcd *hcd, struct usb_device *udev) 4862{ 4863 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4864 4865 if (!hsotg->params.change_speed_quirk) 4866 return; 4867 4868 /* 4869 * On removal, set speed to default high-speed. 4870 */ 4871 if (udev->parent && udev->parent->speed > USB_SPEED_UNKNOWN && 4872 udev->parent->speed < USB_SPEED_HIGH) { 4873 dev_info(hsotg->dev, "Set speed to default high-speed\n"); 4874 dwc2_change_bus_speed(hcd, HPRT0_SPD_HIGH_SPEED); 4875 } 4876} 4877 4878static int dwc2_reset_device(struct usb_hcd *hcd, struct usb_device *udev) 4879{ 4880 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4881 4882 if (!hsotg->params.change_speed_quirk) 4883 return 0; 4884 4885 if (udev->speed == USB_SPEED_HIGH) { 4886 dev_info(hsotg->dev, "Set speed to high-speed\n"); 4887 dwc2_change_bus_speed(hcd, HPRT0_SPD_HIGH_SPEED); 4888 } else if ((udev->speed == USB_SPEED_FULL || 4889 udev->speed == USB_SPEED_LOW)) { 4890 /* 4891 * Change speed setting to full-speed if there's 4892 * a full-speed or low-speed device plugged in. 4893 */ 4894 dev_info(hsotg->dev, "Set speed to full-speed\n"); 4895 dwc2_change_bus_speed(hcd, HPRT0_SPD_FULL_SPEED); 4896 } 4897 4898 return 0; 4899} 4900 4901static struct hc_driver dwc2_hc_driver = { 4902 .description = "dwc2_hsotg", 4903 .product_desc = "DWC OTG Controller", 4904 .hcd_priv_size = sizeof(struct wrapper_priv_data), 4905 4906 .irq = _dwc2_hcd_irq, 4907 .flags = HCD_MEMORY | HCD_USB2 | HCD_BH, 4908 4909 .start = _dwc2_hcd_start, 4910 .stop = _dwc2_hcd_stop, 4911 .urb_enqueue = _dwc2_hcd_urb_enqueue, 4912 .urb_dequeue = _dwc2_hcd_urb_dequeue, 4913 .endpoint_disable = _dwc2_hcd_endpoint_disable, 4914 .endpoint_reset = _dwc2_hcd_endpoint_reset, 4915 .get_frame_number = _dwc2_hcd_get_frame_number, 4916 4917 .hub_status_data = _dwc2_hcd_hub_status_data, 4918 .hub_control = _dwc2_hcd_hub_control, 4919 .clear_tt_buffer_complete = _dwc2_hcd_clear_tt_buffer_complete, 4920 4921 .bus_suspend = _dwc2_hcd_suspend, 4922 .bus_resume = _dwc2_hcd_resume, 4923 4924 .map_urb_for_dma = dwc2_map_urb_for_dma, 4925 .unmap_urb_for_dma = dwc2_unmap_urb_for_dma, 4926}; 4927 4928/* 4929 * Frees secondary storage associated with the dwc2_hsotg structure contained 4930 * in the struct usb_hcd field 4931 */ 4932static void dwc2_hcd_free(struct dwc2_hsotg *hsotg) 4933{ 4934 u32 ahbcfg; 4935 u32 dctl; 4936 int i; 4937 4938 dev_dbg(hsotg->dev, "DWC OTG HCD FREE\n"); 4939 4940 /* Free memory for QH/QTD lists */ 4941 dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_inactive); 4942 dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_waiting); 4943 dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_active); 4944 dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_inactive); 4945 dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_ready); 4946 dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_assigned); 4947 dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_queued); 4948 4949 /* Free memory for the host channels */ 4950 for (i = 0; i < MAX_EPS_CHANNELS; i++) { 4951 struct dwc2_host_chan *chan = hsotg->hc_ptr_array[i]; 4952 4953 if (chan) { 4954 dev_dbg(hsotg->dev, "HCD Free channel #%i, chan=%p\n", 4955 i, chan); 4956 hsotg->hc_ptr_array[i] = NULL; 4957 kfree(chan); 4958 } 4959 } 4960 4961 if (hsotg->params.host_dma) { 4962 if (hsotg->status_buf) { 4963 dma_free_coherent(hsotg->dev, DWC2_HCD_STATUS_BUF_SIZE, 4964 hsotg->status_buf, 4965 hsotg->status_buf_dma); 4966 hsotg->status_buf = NULL; 4967 } 4968 } else { 4969 kfree(hsotg->status_buf); 4970 hsotg->status_buf = NULL; 4971 } 4972 4973 ahbcfg = dwc2_readl(hsotg, GAHBCFG); 4974 4975 /* Disable all interrupts */ 4976 ahbcfg &= ~GAHBCFG_GLBL_INTR_EN; 4977 dwc2_writel(hsotg, ahbcfg, GAHBCFG); 4978 dwc2_writel(hsotg, 0, GINTMSK); 4979 4980 if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_3_00a) { 4981 dctl = dwc2_readl(hsotg, DCTL); 4982 dctl |= DCTL_SFTDISCON; 4983 dwc2_writel(hsotg, dctl, DCTL); 4984 } 4985 4986 if (hsotg->wq_otg) { 4987 if (!cancel_work_sync(&hsotg->wf_otg)) 4988 flush_workqueue(hsotg->wq_otg); 4989 destroy_workqueue(hsotg->wq_otg); 4990 } 4991 4992 cancel_work_sync(&hsotg->phy_reset_work); 4993 4994 del_timer(&hsotg->wkp_timer); 4995} 4996 4997static void dwc2_hcd_release(struct dwc2_hsotg *hsotg) 4998{ 4999 /* Turn off all host-specific interrupts */ 5000 dwc2_disable_host_interrupts(hsotg); 5001 5002 dwc2_hcd_free(hsotg); 5003} 5004 5005/* 5006 * Initializes the HCD. This function allocates memory for and initializes the 5007 * static parts of the usb_hcd and dwc2_hsotg structures. It also registers the 5008 * USB bus with the core and calls the hc_driver->start() function. It returns 5009 * a negative error on failure. 5010 */ 5011int dwc2_hcd_init(struct dwc2_hsotg *hsotg) 5012{ 5013 struct platform_device *pdev = to_platform_device(hsotg->dev); 5014 struct resource *res; 5015 struct usb_hcd *hcd; 5016 struct dwc2_host_chan *channel; 5017 u32 hcfg; 5018 int i, num_channels; 5019 int retval; 5020 5021 if (usb_disabled()) 5022 return -ENODEV; 5023 5024 dev_dbg(hsotg->dev, "DWC OTG HCD INIT\n"); 5025 5026 retval = -ENOMEM; 5027 5028 hcfg = dwc2_readl(hsotg, HCFG); 5029 dev_dbg(hsotg->dev, "hcfg=%08x\n", hcfg); 5030 5031#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS 5032 hsotg->frame_num_array = kcalloc(FRAME_NUM_ARRAY_SIZE, 5033 sizeof(*hsotg->frame_num_array), 5034 GFP_KERNEL); 5035 if (!hsotg->frame_num_array) 5036 goto error1; 5037 hsotg->last_frame_num_array = 5038 kcalloc(FRAME_NUM_ARRAY_SIZE, 5039 sizeof(*hsotg->last_frame_num_array), GFP_KERNEL); 5040 if (!hsotg->last_frame_num_array) 5041 goto error1; 5042#endif 5043 hsotg->last_frame_num = HFNUM_MAX_FRNUM; 5044 5045 /* Check if the bus driver or platform code has setup a dma_mask */ 5046 if (hsotg->params.host_dma && 5047 !hsotg->dev->dma_mask) { 5048 dev_warn(hsotg->dev, 5049 "dma_mask not set, disabling DMA\n"); 5050 hsotg->params.host_dma = false; 5051 hsotg->params.dma_desc_enable = false; 5052 } 5053 5054 /* Set device flags indicating whether the HCD supports DMA */ 5055 if (hsotg->params.host_dma) { 5056 if (dma_set_mask(hsotg->dev, DMA_BIT_MASK(32)) < 0) 5057 dev_warn(hsotg->dev, "can't set DMA mask\n"); 5058 if (dma_set_coherent_mask(hsotg->dev, DMA_BIT_MASK(32)) < 0) 5059 dev_warn(hsotg->dev, "can't set coherent DMA mask\n"); 5060 } 5061 5062 if (hsotg->params.change_speed_quirk) { 5063 dwc2_hc_driver.free_dev = dwc2_free_dev; 5064 dwc2_hc_driver.reset_device = dwc2_reset_device; 5065 } 5066 5067 if (hsotg->params.host_dma) 5068 dwc2_hc_driver.flags |= HCD_DMA; 5069 5070 hcd = usb_create_hcd(&dwc2_hc_driver, hsotg->dev, dev_name(hsotg->dev)); 5071 if (!hcd) 5072 goto error1; 5073 5074 hcd->has_tt = 1; 5075 5076 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 5077 if (!res) { 5078 retval = -EINVAL; 5079 goto error2; 5080 } 5081 hcd->rsrc_start = res->start; 5082 hcd->rsrc_len = resource_size(res); 5083 5084 ((struct wrapper_priv_data *)&hcd->hcd_priv)->hsotg = hsotg; 5085 hsotg->priv = hcd; 5086 5087 /* 5088 * Disable the global interrupt until all the interrupt handlers are 5089 * installed 5090 */ 5091 dwc2_disable_global_interrupts(hsotg); 5092 5093 /* Initialize the DWC_otg core, and select the Phy type */ 5094 retval = dwc2_core_init(hsotg, true); 5095 if (retval) 5096 goto error2; 5097 5098 /* Create new workqueue and init work */ 5099 retval = -ENOMEM; 5100 hsotg->wq_otg = alloc_ordered_workqueue("dwc2", 0); 5101 if (!hsotg->wq_otg) { 5102 dev_err(hsotg->dev, "Failed to create workqueue\n"); 5103 goto error2; 5104 } 5105 INIT_WORK(&hsotg->wf_otg, dwc2_conn_id_status_change); 5106 5107 timer_setup(&hsotg->wkp_timer, dwc2_wakeup_detected, 0); 5108 5109 /* Initialize the non-periodic schedule */ 5110 INIT_LIST_HEAD(&hsotg->non_periodic_sched_inactive); 5111 INIT_LIST_HEAD(&hsotg->non_periodic_sched_waiting); 5112 INIT_LIST_HEAD(&hsotg->non_periodic_sched_active); 5113 5114 /* Initialize the periodic schedule */ 5115 INIT_LIST_HEAD(&hsotg->periodic_sched_inactive); 5116 INIT_LIST_HEAD(&hsotg->periodic_sched_ready); 5117 INIT_LIST_HEAD(&hsotg->periodic_sched_assigned); 5118 INIT_LIST_HEAD(&hsotg->periodic_sched_queued); 5119 5120 INIT_LIST_HEAD(&hsotg->split_order); 5121 5122 /* 5123 * Create a host channel descriptor for each host channel implemented 5124 * in the controller. Initialize the channel descriptor array. 5125 */ 5126 INIT_LIST_HEAD(&hsotg->free_hc_list); 5127 num_channels = hsotg->params.host_channels; 5128 memset(&hsotg->hc_ptr_array[0], 0, sizeof(hsotg->hc_ptr_array)); 5129 5130 for (i = 0; i < num_channels; i++) { 5131 channel = kzalloc(sizeof(*channel), GFP_KERNEL); 5132 if (!channel) 5133 goto error3; 5134 channel->hc_num = i; 5135 INIT_LIST_HEAD(&channel->split_order_list_entry); 5136 hsotg->hc_ptr_array[i] = channel; 5137 } 5138 5139 /* Initialize work */ 5140 INIT_DELAYED_WORK(&hsotg->start_work, dwc2_hcd_start_func); 5141 INIT_DELAYED_WORK(&hsotg->reset_work, dwc2_hcd_reset_func); 5142 INIT_WORK(&hsotg->phy_reset_work, dwc2_hcd_phy_reset_func); 5143 5144 /* 5145 * Allocate space for storing data on status transactions. Normally no 5146 * data is sent, but this space acts as a bit bucket. This must be 5147 * done after usb_add_hcd since that function allocates the DMA buffer 5148 * pool. 5149 */ 5150 if (hsotg->params.host_dma) 5151 hsotg->status_buf = dma_alloc_coherent(hsotg->dev, 5152 DWC2_HCD_STATUS_BUF_SIZE, 5153 &hsotg->status_buf_dma, GFP_KERNEL); 5154 else 5155 hsotg->status_buf = kzalloc(DWC2_HCD_STATUS_BUF_SIZE, 5156 GFP_KERNEL); 5157 5158 if (!hsotg->status_buf) 5159 goto error3; 5160 5161 /* 5162 * Create kmem caches to handle descriptor buffers in descriptor 5163 * DMA mode. 5164 * Alignment must be set to 512 bytes. 5165 */ 5166 if (hsotg->params.dma_desc_enable || 5167 hsotg->params.dma_desc_fs_enable) { 5168 hsotg->desc_gen_cache = kmem_cache_create("dwc2-gen-desc", 5169 sizeof(struct dwc2_dma_desc) * 5170 MAX_DMA_DESC_NUM_GENERIC, 512, SLAB_CACHE_DMA, 5171 NULL); 5172 if (!hsotg->desc_gen_cache) { 5173 dev_err(hsotg->dev, 5174 "unable to create dwc2 generic desc cache\n"); 5175 5176 /* 5177 * Disable descriptor dma mode since it will not be 5178 * usable. 5179 */ 5180 hsotg->params.dma_desc_enable = false; 5181 hsotg->params.dma_desc_fs_enable = false; 5182 } 5183 5184 hsotg->desc_hsisoc_cache = kmem_cache_create("dwc2-hsisoc-desc", 5185 sizeof(struct dwc2_dma_desc) * 5186 MAX_DMA_DESC_NUM_HS_ISOC, 512, 0, NULL); 5187 if (!hsotg->desc_hsisoc_cache) { 5188 dev_err(hsotg->dev, 5189 "unable to create dwc2 hs isoc desc cache\n"); 5190 5191 kmem_cache_destroy(hsotg->desc_gen_cache); 5192 5193 /* 5194 * Disable descriptor dma mode since it will not be 5195 * usable. 5196 */ 5197 hsotg->params.dma_desc_enable = false; 5198 hsotg->params.dma_desc_fs_enable = false; 5199 } 5200 } 5201 5202 if (hsotg->params.host_dma) { 5203 /* 5204 * Create kmem caches to handle non-aligned buffer 5205 * in Buffer DMA mode. 5206 */ 5207 hsotg->unaligned_cache = kmem_cache_create("dwc2-unaligned-dma", 5208 DWC2_KMEM_UNALIGNED_BUF_SIZE, 4, 5209 SLAB_CACHE_DMA, NULL); 5210 if (!hsotg->unaligned_cache) 5211 dev_err(hsotg->dev, 5212 "unable to create dwc2 unaligned cache\n"); 5213 } 5214 5215 hsotg->otg_port = 1; 5216 hsotg->frame_list = NULL; 5217 hsotg->frame_list_dma = 0; 5218 hsotg->periodic_qh_count = 0; 5219 5220 /* Initiate lx_state to L3 disconnected state */ 5221 hsotg->lx_state = DWC2_L3; 5222 5223 hcd->self.otg_port = hsotg->otg_port; 5224 5225 /* Don't support SG list at this point */ 5226 hcd->self.sg_tablesize = 0; 5227 5228 if (!IS_ERR_OR_NULL(hsotg->uphy)) 5229 otg_set_host(hsotg->uphy->otg, &hcd->self); 5230 5231 /* 5232 * Finish generic HCD initialization and start the HCD. This function 5233 * allocates the DMA buffer pool, registers the USB bus, requests the 5234 * IRQ line, and calls hcd_start method. 5235 */ 5236 retval = usb_add_hcd(hcd, hsotg->irq, IRQF_SHARED); 5237 if (retval < 0) 5238 goto error4; 5239 5240 device_wakeup_enable(hcd->self.controller); 5241 5242 dwc2_hcd_dump_state(hsotg); 5243 5244 dwc2_enable_global_interrupts(hsotg); 5245 5246 return 0; 5247 5248error4: 5249 kmem_cache_destroy(hsotg->unaligned_cache); 5250 kmem_cache_destroy(hsotg->desc_hsisoc_cache); 5251 kmem_cache_destroy(hsotg->desc_gen_cache); 5252error3: 5253 dwc2_hcd_release(hsotg); 5254error2: 5255 usb_put_hcd(hcd); 5256error1: 5257 5258#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS 5259 kfree(hsotg->last_frame_num_array); 5260 kfree(hsotg->frame_num_array); 5261#endif 5262 5263 dev_err(hsotg->dev, "%s() FAILED, returning %d\n", __func__, retval); 5264 return retval; 5265} 5266 5267/* 5268 * Removes the HCD. 5269 * Frees memory and resources associated with the HCD and deregisters the bus. 5270 */ 5271void dwc2_hcd_remove(struct dwc2_hsotg *hsotg) 5272{ 5273 struct usb_hcd *hcd; 5274 5275 dev_dbg(hsotg->dev, "DWC OTG HCD REMOVE\n"); 5276 5277 hcd = dwc2_hsotg_to_hcd(hsotg); 5278 dev_dbg(hsotg->dev, "hsotg->hcd = %p\n", hcd); 5279 5280 if (!hcd) { 5281 dev_dbg(hsotg->dev, "%s: dwc2_hsotg_to_hcd(hsotg) NULL!\n", 5282 __func__); 5283 return; 5284 } 5285 5286 if (!IS_ERR_OR_NULL(hsotg->uphy)) 5287 otg_set_host(hsotg->uphy->otg, NULL); 5288 5289 usb_remove_hcd(hcd); 5290 hsotg->priv = NULL; 5291 5292 kmem_cache_destroy(hsotg->unaligned_cache); 5293 kmem_cache_destroy(hsotg->desc_hsisoc_cache); 5294 kmem_cache_destroy(hsotg->desc_gen_cache); 5295 5296 dwc2_hcd_release(hsotg); 5297 usb_put_hcd(hcd); 5298 5299#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS 5300 kfree(hsotg->last_frame_num_array); 5301 kfree(hsotg->frame_num_array); 5302#endif 5303} 5304 5305/** 5306 * dwc2_backup_host_registers() - Backup controller host registers. 5307 * When suspending usb bus, registers needs to be backuped 5308 * if controller power is disabled once suspended. 5309 * 5310 * @hsotg: Programming view of the DWC_otg controller 5311 */ 5312int dwc2_backup_host_registers(struct dwc2_hsotg *hsotg) 5313{ 5314 struct dwc2_hregs_backup *hr; 5315 int i; 5316 5317 dev_dbg(hsotg->dev, "%s\n", __func__); 5318 5319 /* Backup Host regs */ 5320 hr = &hsotg->hr_backup; 5321 hr->hcfg = dwc2_readl(hsotg, HCFG); 5322 hr->haintmsk = dwc2_readl(hsotg, HAINTMSK); 5323 for (i = 0; i < hsotg->params.host_channels; ++i) 5324 hr->hcintmsk[i] = dwc2_readl(hsotg, HCINTMSK(i)); 5325 5326 hr->hprt0 = dwc2_read_hprt0(hsotg); 5327 hr->hfir = dwc2_readl(hsotg, HFIR); 5328 hr->hptxfsiz = dwc2_readl(hsotg, HPTXFSIZ); 5329 hr->valid = true; 5330 5331 return 0; 5332} 5333 5334/** 5335 * dwc2_restore_host_registers() - Restore controller host registers. 5336 * When resuming usb bus, device registers needs to be restored 5337 * if controller power were disabled. 5338 * 5339 * @hsotg: Programming view of the DWC_otg controller 5340 */ 5341int dwc2_restore_host_registers(struct dwc2_hsotg *hsotg) 5342{ 5343 struct dwc2_hregs_backup *hr; 5344 int i; 5345 5346 dev_dbg(hsotg->dev, "%s\n", __func__); 5347 5348 /* Restore host regs */ 5349 hr = &hsotg->hr_backup; 5350 if (!hr->valid) { 5351 dev_err(hsotg->dev, "%s: no host registers to restore\n", 5352 __func__); 5353 return -EINVAL; 5354 } 5355 hr->valid = false; 5356 5357 dwc2_writel(hsotg, hr->hcfg, HCFG); 5358 dwc2_writel(hsotg, hr->haintmsk, HAINTMSK); 5359 5360 for (i = 0; i < hsotg->params.host_channels; ++i) 5361 dwc2_writel(hsotg, hr->hcintmsk[i], HCINTMSK(i)); 5362 5363 dwc2_writel(hsotg, hr->hprt0, HPRT0); 5364 dwc2_writel(hsotg, hr->hfir, HFIR); 5365 dwc2_writel(hsotg, hr->hptxfsiz, HPTXFSIZ); 5366 hsotg->frame_number = 0; 5367 5368 return 0; 5369} 5370 5371/** 5372 * dwc2_host_enter_hibernation() - Put controller in Hibernation. 5373 * 5374 * @hsotg: Programming view of the DWC_otg controller 5375 */ 5376int dwc2_host_enter_hibernation(struct dwc2_hsotg *hsotg) 5377{ 5378 unsigned long flags; 5379 int ret = 0; 5380 u32 hprt0; 5381 u32 pcgcctl; 5382 u32 gusbcfg; 5383 u32 gpwrdn; 5384 5385 dev_dbg(hsotg->dev, "Preparing host for hibernation\n"); 5386 ret = dwc2_backup_global_registers(hsotg); 5387 if (ret) { 5388 dev_err(hsotg->dev, "%s: failed to backup global registers\n", 5389 __func__); 5390 return ret; 5391 } 5392 ret = dwc2_backup_host_registers(hsotg); 5393 if (ret) { 5394 dev_err(hsotg->dev, "%s: failed to backup host registers\n", 5395 __func__); 5396 return ret; 5397 } 5398 5399 /* Enter USB Suspend Mode */ 5400 hprt0 = dwc2_readl(hsotg, HPRT0); 5401 hprt0 |= HPRT0_SUSP; 5402 hprt0 &= ~HPRT0_ENA; 5403 dwc2_writel(hsotg, hprt0, HPRT0); 5404 5405 /* Wait for the HPRT0.PrtSusp register field to be set */ 5406 if (dwc2_hsotg_wait_bit_set(hsotg, HPRT0, HPRT0_SUSP, 5000)) 5407 dev_warn(hsotg->dev, "Suspend wasn't generated\n"); 5408 5409 /* 5410 * We need to disable interrupts to prevent servicing of any IRQ 5411 * during going to hibernation 5412 */ 5413 spin_lock_irqsave(&hsotg->lock, flags); 5414 hsotg->lx_state = DWC2_L2; 5415 5416 gusbcfg = dwc2_readl(hsotg, GUSBCFG); 5417 if (gusbcfg & GUSBCFG_ULPI_UTMI_SEL) { 5418 /* ULPI interface */ 5419 /* Suspend the Phy Clock */ 5420 pcgcctl = dwc2_readl(hsotg, PCGCTL); 5421 pcgcctl |= PCGCTL_STOPPCLK; 5422 dwc2_writel(hsotg, pcgcctl, PCGCTL); 5423 udelay(10); 5424 5425 gpwrdn = dwc2_readl(hsotg, GPWRDN); 5426 gpwrdn |= GPWRDN_PMUACTV; 5427 dwc2_writel(hsotg, gpwrdn, GPWRDN); 5428 udelay(10); 5429 } else { 5430 /* UTMI+ Interface */ 5431 gpwrdn = dwc2_readl(hsotg, GPWRDN); 5432 gpwrdn |= GPWRDN_PMUACTV; 5433 dwc2_writel(hsotg, gpwrdn, GPWRDN); 5434 udelay(10); 5435 5436 pcgcctl = dwc2_readl(hsotg, PCGCTL); 5437 pcgcctl |= PCGCTL_STOPPCLK; 5438 dwc2_writel(hsotg, pcgcctl, PCGCTL); 5439 udelay(10); 5440 } 5441 5442 /* Enable interrupts from wake up logic */ 5443 gpwrdn = dwc2_readl(hsotg, GPWRDN); 5444 gpwrdn |= GPWRDN_PMUINTSEL; 5445 dwc2_writel(hsotg, gpwrdn, GPWRDN); 5446 udelay(10); 5447 5448 /* Unmask host mode interrupts in GPWRDN */ 5449 gpwrdn = dwc2_readl(hsotg, GPWRDN); 5450 gpwrdn |= GPWRDN_DISCONN_DET_MSK; 5451 gpwrdn |= GPWRDN_LNSTSCHG_MSK; 5452 gpwrdn |= GPWRDN_STS_CHGINT_MSK; 5453 dwc2_writel(hsotg, gpwrdn, GPWRDN); 5454 udelay(10); 5455 5456 /* Enable Power Down Clamp */ 5457 gpwrdn = dwc2_readl(hsotg, GPWRDN); 5458 gpwrdn |= GPWRDN_PWRDNCLMP; 5459 dwc2_writel(hsotg, gpwrdn, GPWRDN); 5460 udelay(10); 5461 5462 /* Switch off VDD */ 5463 gpwrdn = dwc2_readl(hsotg, GPWRDN); 5464 gpwrdn |= GPWRDN_PWRDNSWTCH; 5465 dwc2_writel(hsotg, gpwrdn, GPWRDN); 5466 5467 hsotg->hibernated = 1; 5468 hsotg->bus_suspended = 1; 5469 dev_dbg(hsotg->dev, "Host hibernation completed\n"); 5470 spin_unlock_irqrestore(&hsotg->lock, flags); 5471 return ret; 5472} 5473 5474/* 5475 * dwc2_host_exit_hibernation() 5476 * 5477 * @hsotg: Programming view of the DWC_otg controller 5478 * @rem_wakeup: indicates whether resume is initiated by Device or Host. 5479 * @param reset: indicates whether resume is initiated by Reset. 5480 * 5481 * Return: non-zero if failed to enter to hibernation. 5482 * 5483 * This function is for exiting from Host mode hibernation by 5484 * Host Initiated Resume/Reset and Device Initiated Remote-Wakeup. 5485 */ 5486int dwc2_host_exit_hibernation(struct dwc2_hsotg *hsotg, int rem_wakeup, 5487 int reset) 5488{ 5489 u32 gpwrdn; 5490 u32 hprt0; 5491 int ret = 0; 5492 struct dwc2_gregs_backup *gr; 5493 struct dwc2_hregs_backup *hr; 5494 5495 gr = &hsotg->gr_backup; 5496 hr = &hsotg->hr_backup; 5497 5498 dev_dbg(hsotg->dev, 5499 "%s: called with rem_wakeup = %d reset = %d\n", 5500 __func__, rem_wakeup, reset); 5501 5502 dwc2_hib_restore_common(hsotg, rem_wakeup, 1); 5503 hsotg->hibernated = 0; 5504 5505 /* 5506 * This step is not described in functional spec but if not wait for 5507 * this delay, mismatch interrupts occurred because just after restore 5508 * core is in Device mode(gintsts.curmode == 0) 5509 */ 5510 mdelay(100); 5511 5512 /* Clear all pending interupts */ 5513 dwc2_writel(hsotg, 0xffffffff, GINTSTS); 5514 5515 /* De-assert Restore */ 5516 gpwrdn = dwc2_readl(hsotg, GPWRDN); 5517 gpwrdn &= ~GPWRDN_RESTORE; 5518 dwc2_writel(hsotg, gpwrdn, GPWRDN); 5519 udelay(10); 5520 5521 /* Restore GUSBCFG, HCFG */ 5522 dwc2_writel(hsotg, gr->gusbcfg, GUSBCFG); 5523 dwc2_writel(hsotg, hr->hcfg, HCFG); 5524 5525 /* De-assert Wakeup Logic */ 5526 gpwrdn = dwc2_readl(hsotg, GPWRDN); 5527 gpwrdn &= ~GPWRDN_PMUACTV; 5528 dwc2_writel(hsotg, gpwrdn, GPWRDN); 5529 udelay(10); 5530 5531 hprt0 = hr->hprt0; 5532 hprt0 |= HPRT0_PWR; 5533 hprt0 &= ~HPRT0_ENA; 5534 hprt0 &= ~HPRT0_SUSP; 5535 dwc2_writel(hsotg, hprt0, HPRT0); 5536 5537 hprt0 = hr->hprt0; 5538 hprt0 |= HPRT0_PWR; 5539 hprt0 &= ~HPRT0_ENA; 5540 hprt0 &= ~HPRT0_SUSP; 5541 5542 if (reset) { 5543 hprt0 |= HPRT0_RST; 5544 dwc2_writel(hsotg, hprt0, HPRT0); 5545 5546 /* Wait for Resume time and then program HPRT again */ 5547 mdelay(60); 5548 hprt0 &= ~HPRT0_RST; 5549 dwc2_writel(hsotg, hprt0, HPRT0); 5550 } else { 5551 hprt0 |= HPRT0_RES; 5552 dwc2_writel(hsotg, hprt0, HPRT0); 5553 5554 /* Wait for Resume time and then program HPRT again */ 5555 mdelay(100); 5556 hprt0 &= ~HPRT0_RES; 5557 dwc2_writel(hsotg, hprt0, HPRT0); 5558 } 5559 /* Clear all interrupt status */ 5560 hprt0 = dwc2_readl(hsotg, HPRT0); 5561 hprt0 |= HPRT0_CONNDET; 5562 hprt0 |= HPRT0_ENACHG; 5563 hprt0 &= ~HPRT0_ENA; 5564 dwc2_writel(hsotg, hprt0, HPRT0); 5565 5566 hprt0 = dwc2_readl(hsotg, HPRT0); 5567 5568 /* Clear all pending interupts */ 5569 dwc2_writel(hsotg, 0xffffffff, GINTSTS); 5570 5571 /* Restore global registers */ 5572 ret = dwc2_restore_global_registers(hsotg); 5573 if (ret) { 5574 dev_err(hsotg->dev, "%s: failed to restore registers\n", 5575 __func__); 5576 return ret; 5577 } 5578 5579 /* Restore host registers */ 5580 ret = dwc2_restore_host_registers(hsotg); 5581 if (ret) { 5582 dev_err(hsotg->dev, "%s: failed to restore host registers\n", 5583 __func__); 5584 return ret; 5585 } 5586 5587 if (rem_wakeup) { 5588 dwc2_hcd_rem_wakeup(hsotg); 5589 /* 5590 * Change "port_connect_status_change" flag to re-enumerate, 5591 * because after exit from hibernation port connection status 5592 * is not detected. 5593 */ 5594 hsotg->flags.b.port_connect_status_change = 1; 5595 } 5596 5597 hsotg->hibernated = 0; 5598 hsotg->bus_suspended = 0; 5599 hsotg->lx_state = DWC2_L0; 5600 dev_dbg(hsotg->dev, "Host hibernation restore complete\n"); 5601 return ret; 5602} 5603 5604bool dwc2_host_can_poweroff_phy(struct dwc2_hsotg *dwc2) 5605{ 5606 struct usb_device *root_hub = dwc2_hsotg_to_hcd(dwc2)->self.root_hub; 5607 5608 /* If the controller isn't allowed to wakeup then we can power off. */ 5609 if (!device_may_wakeup(dwc2->dev)) 5610 return true; 5611 5612 /* 5613 * We don't want to power off the PHY if something under the 5614 * root hub has wakeup enabled. 5615 */ 5616 if (usb_wakeup_enabled_descendants(root_hub)) 5617 return false; 5618 5619 /* No reason to keep the PHY powered, so allow poweroff */ 5620 return true; 5621} 5622