1/* 2 * Sonics Silicon Backplane 3 * Subsystem core 4 * 5 * Copyright 2005, Broadcom Corporation 6 * Copyright 2006, 2007, Michael Buesch <m@bues.ch> 7 * 8 * Licensed under the GNU/GPL. See COPYING for details. 9 */ 10 11#include "ssb_private.h" 12 13#include <linux/delay.h> 14#include <linux/io.h> 15#include <linux/module.h> 16#include <linux/platform_device.h> 17#include <linux/ssb/ssb.h> 18#include <linux/ssb/ssb_regs.h> 19#include <linux/ssb/ssb_driver_gige.h> 20#include <linux/dma-mapping.h> 21#include <linux/pci.h> 22#include <linux/mmc/sdio_func.h> 23#include <linux/slab.h> 24 25#include <pcmcia/cistpl.h> 26#include <pcmcia/ds.h> 27 28 29MODULE_DESCRIPTION("Sonics Silicon Backplane driver"); 30MODULE_LICENSE("GPL"); 31 32 33/* Temporary list of yet-to-be-attached buses */ 34static LIST_HEAD(attach_queue); 35/* List if running buses */ 36static LIST_HEAD(buses); 37/* Software ID counter */ 38static unsigned int next_busnumber; 39/* buses_mutes locks the two buslists and the next_busnumber. 40 * Don't lock this directly, but use ssb_buses_[un]lock() below. */ 41static DEFINE_MUTEX(buses_mutex); 42 43/* There are differences in the codeflow, if the bus is 44 * initialized from early boot, as various needed services 45 * are not available early. This is a mechanism to delay 46 * these initializations to after early boot has finished. 47 * It's also used to avoid mutex locking, as that's not 48 * available and needed early. */ 49static bool ssb_is_early_boot = 1; 50 51static void ssb_buses_lock(void); 52static void ssb_buses_unlock(void); 53 54 55#ifdef CONFIG_SSB_PCIHOST 56struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev) 57{ 58 struct ssb_bus *bus; 59 60 ssb_buses_lock(); 61 list_for_each_entry(bus, &buses, list) { 62 if (bus->bustype == SSB_BUSTYPE_PCI && 63 bus->host_pci == pdev) 64 goto found; 65 } 66 bus = NULL; 67found: 68 ssb_buses_unlock(); 69 70 return bus; 71} 72#endif /* CONFIG_SSB_PCIHOST */ 73 74#ifdef CONFIG_SSB_PCMCIAHOST 75struct ssb_bus *ssb_pcmcia_dev_to_bus(struct pcmcia_device *pdev) 76{ 77 struct ssb_bus *bus; 78 79 ssb_buses_lock(); 80 list_for_each_entry(bus, &buses, list) { 81 if (bus->bustype == SSB_BUSTYPE_PCMCIA && 82 bus->host_pcmcia == pdev) 83 goto found; 84 } 85 bus = NULL; 86found: 87 ssb_buses_unlock(); 88 89 return bus; 90} 91#endif /* CONFIG_SSB_PCMCIAHOST */ 92 93int ssb_for_each_bus_call(unsigned long data, 94 int (*func)(struct ssb_bus *bus, unsigned long data)) 95{ 96 struct ssb_bus *bus; 97 int res; 98 99 ssb_buses_lock(); 100 list_for_each_entry(bus, &buses, list) { 101 res = func(bus, data); 102 if (res >= 0) { 103 ssb_buses_unlock(); 104 return res; 105 } 106 } 107 ssb_buses_unlock(); 108 109 return -ENODEV; 110} 111 112static struct ssb_device *ssb_device_get(struct ssb_device *dev) 113{ 114 if (dev) 115 get_device(dev->dev); 116 return dev; 117} 118 119static void ssb_device_put(struct ssb_device *dev) 120{ 121 if (dev) 122 put_device(dev->dev); 123} 124 125static int ssb_device_resume(struct device *dev) 126{ 127 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); 128 struct ssb_driver *ssb_drv; 129 int err = 0; 130 131 if (dev->driver) { 132 ssb_drv = drv_to_ssb_drv(dev->driver); 133 if (ssb_drv && ssb_drv->resume) 134 err = ssb_drv->resume(ssb_dev); 135 if (err) 136 goto out; 137 } 138out: 139 return err; 140} 141 142static int ssb_device_suspend(struct device *dev, pm_message_t state) 143{ 144 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); 145 struct ssb_driver *ssb_drv; 146 int err = 0; 147 148 if (dev->driver) { 149 ssb_drv = drv_to_ssb_drv(dev->driver); 150 if (ssb_drv && ssb_drv->suspend) 151 err = ssb_drv->suspend(ssb_dev, state); 152 if (err) 153 goto out; 154 } 155out: 156 return err; 157} 158 159int ssb_bus_resume(struct ssb_bus *bus) 160{ 161 int err; 162 163 /* Reset HW state information in memory, so that HW is 164 * completely reinitialized. */ 165 bus->mapped_device = NULL; 166#ifdef CONFIG_SSB_DRIVER_PCICORE 167 bus->pcicore.setup_done = 0; 168#endif 169 170 err = ssb_bus_powerup(bus, 0); 171 if (err) 172 return err; 173 err = ssb_pcmcia_hardware_setup(bus); 174 if (err) { 175 ssb_bus_may_powerdown(bus); 176 return err; 177 } 178 ssb_chipco_resume(&bus->chipco); 179 ssb_bus_may_powerdown(bus); 180 181 return 0; 182} 183EXPORT_SYMBOL(ssb_bus_resume); 184 185int ssb_bus_suspend(struct ssb_bus *bus) 186{ 187 ssb_chipco_suspend(&bus->chipco); 188 ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0); 189 190 return 0; 191} 192EXPORT_SYMBOL(ssb_bus_suspend); 193 194#ifdef CONFIG_SSB_SPROM 195/** ssb_devices_freeze - Freeze all devices on the bus. 196 * 197 * After freezing no device driver will be handling a device 198 * on this bus anymore. ssb_devices_thaw() must be called after 199 * a successful freeze to reactivate the devices. 200 * 201 * @bus: The bus. 202 * @ctx: Context structure. Pass this to ssb_devices_thaw(). 203 */ 204int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx) 205{ 206 struct ssb_device *sdev; 207 struct ssb_driver *sdrv; 208 unsigned int i; 209 210 memset(ctx, 0, sizeof(*ctx)); 211 ctx->bus = bus; 212 WARN_ON(bus->nr_devices > ARRAY_SIZE(ctx->device_frozen)); 213 214 for (i = 0; i < bus->nr_devices; i++) { 215 sdev = ssb_device_get(&bus->devices[i]); 216 217 if (!sdev->dev || !sdev->dev->driver || 218 !device_is_registered(sdev->dev)) { 219 ssb_device_put(sdev); 220 continue; 221 } 222 sdrv = drv_to_ssb_drv(sdev->dev->driver); 223 if (WARN_ON(!sdrv->remove)) 224 continue; 225 sdrv->remove(sdev); 226 ctx->device_frozen[i] = 1; 227 } 228 229 return 0; 230} 231 232/** ssb_devices_thaw - Unfreeze all devices on the bus. 233 * 234 * This will re-attach the device drivers and re-init the devices. 235 * 236 * @ctx: The context structure from ssb_devices_freeze() 237 */ 238int ssb_devices_thaw(struct ssb_freeze_context *ctx) 239{ 240 struct ssb_bus *bus = ctx->bus; 241 struct ssb_device *sdev; 242 struct ssb_driver *sdrv; 243 unsigned int i; 244 int err, result = 0; 245 246 for (i = 0; i < bus->nr_devices; i++) { 247 if (!ctx->device_frozen[i]) 248 continue; 249 sdev = &bus->devices[i]; 250 251 if (WARN_ON(!sdev->dev || !sdev->dev->driver)) 252 continue; 253 sdrv = drv_to_ssb_drv(sdev->dev->driver); 254 if (WARN_ON(!sdrv || !sdrv->probe)) 255 continue; 256 257 err = sdrv->probe(sdev, &sdev->id); 258 if (err) { 259 dev_err(sdev->dev, 260 "Failed to thaw device %s\n", 261 dev_name(sdev->dev)); 262 result = err; 263 } 264 ssb_device_put(sdev); 265 } 266 267 return result; 268} 269#endif /* CONFIG_SSB_SPROM */ 270 271static void ssb_device_shutdown(struct device *dev) 272{ 273 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); 274 struct ssb_driver *ssb_drv; 275 276 if (!dev->driver) 277 return; 278 ssb_drv = drv_to_ssb_drv(dev->driver); 279 if (ssb_drv && ssb_drv->shutdown) 280 ssb_drv->shutdown(ssb_dev); 281} 282 283static int ssb_device_remove(struct device *dev) 284{ 285 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); 286 struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver); 287 288 if (ssb_drv && ssb_drv->remove) 289 ssb_drv->remove(ssb_dev); 290 ssb_device_put(ssb_dev); 291 292 return 0; 293} 294 295static int ssb_device_probe(struct device *dev) 296{ 297 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); 298 struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver); 299 int err = 0; 300 301 ssb_device_get(ssb_dev); 302 if (ssb_drv && ssb_drv->probe) 303 err = ssb_drv->probe(ssb_dev, &ssb_dev->id); 304 if (err) 305 ssb_device_put(ssb_dev); 306 307 return err; 308} 309 310static int ssb_match_devid(const struct ssb_device_id *tabid, 311 const struct ssb_device_id *devid) 312{ 313 if ((tabid->vendor != devid->vendor) && 314 tabid->vendor != SSB_ANY_VENDOR) 315 return 0; 316 if ((tabid->coreid != devid->coreid) && 317 tabid->coreid != SSB_ANY_ID) 318 return 0; 319 if ((tabid->revision != devid->revision) && 320 tabid->revision != SSB_ANY_REV) 321 return 0; 322 return 1; 323} 324 325static int ssb_bus_match(struct device *dev, struct device_driver *drv) 326{ 327 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); 328 struct ssb_driver *ssb_drv = drv_to_ssb_drv(drv); 329 const struct ssb_device_id *id; 330 331 for (id = ssb_drv->id_table; 332 id->vendor || id->coreid || id->revision; 333 id++) { 334 if (ssb_match_devid(id, &ssb_dev->id)) 335 return 1; /* found */ 336 } 337 338 return 0; 339} 340 341static int ssb_device_uevent(struct device *dev, struct kobj_uevent_env *env) 342{ 343 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); 344 345 if (!dev) 346 return -ENODEV; 347 348 return add_uevent_var(env, 349 "MODALIAS=ssb:v%04Xid%04Xrev%02X", 350 ssb_dev->id.vendor, ssb_dev->id.coreid, 351 ssb_dev->id.revision); 352} 353 354#define ssb_config_attr(attrib, field, format_string) \ 355static ssize_t \ 356attrib##_show(struct device *dev, struct device_attribute *attr, char *buf) \ 357{ \ 358 return sprintf(buf, format_string, dev_to_ssb_dev(dev)->field); \ 359} \ 360static DEVICE_ATTR_RO(attrib); 361 362ssb_config_attr(core_num, core_index, "%u\n") 363ssb_config_attr(coreid, id.coreid, "0x%04x\n") 364ssb_config_attr(vendor, id.vendor, "0x%04x\n") 365ssb_config_attr(revision, id.revision, "%u\n") 366ssb_config_attr(irq, irq, "%u\n") 367static ssize_t 368name_show(struct device *dev, struct device_attribute *attr, char *buf) 369{ 370 return sprintf(buf, "%s\n", 371 ssb_core_name(dev_to_ssb_dev(dev)->id.coreid)); 372} 373static DEVICE_ATTR_RO(name); 374 375static struct attribute *ssb_device_attrs[] = { 376 &dev_attr_name.attr, 377 &dev_attr_core_num.attr, 378 &dev_attr_coreid.attr, 379 &dev_attr_vendor.attr, 380 &dev_attr_revision.attr, 381 &dev_attr_irq.attr, 382 NULL, 383}; 384ATTRIBUTE_GROUPS(ssb_device); 385 386static struct bus_type ssb_bustype = { 387 .name = "ssb", 388 .match = ssb_bus_match, 389 .probe = ssb_device_probe, 390 .remove = ssb_device_remove, 391 .shutdown = ssb_device_shutdown, 392 .suspend = ssb_device_suspend, 393 .resume = ssb_device_resume, 394 .uevent = ssb_device_uevent, 395 .dev_groups = ssb_device_groups, 396}; 397 398static void ssb_buses_lock(void) 399{ 400 /* See the comment at the ssb_is_early_boot definition */ 401 if (!ssb_is_early_boot) 402 mutex_lock(&buses_mutex); 403} 404 405static void ssb_buses_unlock(void) 406{ 407 /* See the comment at the ssb_is_early_boot definition */ 408 if (!ssb_is_early_boot) 409 mutex_unlock(&buses_mutex); 410} 411 412static void ssb_devices_unregister(struct ssb_bus *bus) 413{ 414 struct ssb_device *sdev; 415 int i; 416 417 for (i = bus->nr_devices - 1; i >= 0; i--) { 418 sdev = &(bus->devices[i]); 419 if (sdev->dev) 420 device_unregister(sdev->dev); 421 } 422 423#ifdef CONFIG_SSB_EMBEDDED 424 if (bus->bustype == SSB_BUSTYPE_SSB) 425 platform_device_unregister(bus->watchdog); 426#endif 427} 428 429void ssb_bus_unregister(struct ssb_bus *bus) 430{ 431 int err; 432 433 err = ssb_gpio_unregister(bus); 434 if (err == -EBUSY) 435 pr_debug("Some GPIOs are still in use\n"); 436 else if (err) 437 pr_debug("Can not unregister GPIO driver: %i\n", err); 438 439 ssb_buses_lock(); 440 ssb_devices_unregister(bus); 441 list_del(&bus->list); 442 ssb_buses_unlock(); 443 444 ssb_pcmcia_exit(bus); 445 ssb_pci_exit(bus); 446 ssb_iounmap(bus); 447} 448EXPORT_SYMBOL(ssb_bus_unregister); 449 450static void ssb_release_dev(struct device *dev) 451{ 452 struct __ssb_dev_wrapper *devwrap; 453 454 devwrap = container_of(dev, struct __ssb_dev_wrapper, dev); 455 kfree(devwrap); 456} 457 458static int ssb_devices_register(struct ssb_bus *bus) 459{ 460 struct ssb_device *sdev; 461 struct device *dev; 462 struct __ssb_dev_wrapper *devwrap; 463 int i, err = 0; 464 int dev_idx = 0; 465 466 for (i = 0; i < bus->nr_devices; i++) { 467 sdev = &(bus->devices[i]); 468 469 /* We don't register SSB-system devices to the kernel, 470 * as the drivers for them are built into SSB. */ 471 switch (sdev->id.coreid) { 472 case SSB_DEV_CHIPCOMMON: 473 case SSB_DEV_PCI: 474 case SSB_DEV_PCIE: 475 case SSB_DEV_PCMCIA: 476 case SSB_DEV_MIPS: 477 case SSB_DEV_MIPS_3302: 478 case SSB_DEV_EXTIF: 479 continue; 480 } 481 482 devwrap = kzalloc(sizeof(*devwrap), GFP_KERNEL); 483 if (!devwrap) { 484 err = -ENOMEM; 485 goto error; 486 } 487 dev = &devwrap->dev; 488 devwrap->sdev = sdev; 489 490 dev->release = ssb_release_dev; 491 dev->bus = &ssb_bustype; 492 dev_set_name(dev, "ssb%u:%d", bus->busnumber, dev_idx); 493 494 switch (bus->bustype) { 495 case SSB_BUSTYPE_PCI: 496#ifdef CONFIG_SSB_PCIHOST 497 sdev->irq = bus->host_pci->irq; 498 dev->parent = &bus->host_pci->dev; 499 sdev->dma_dev = dev->parent; 500#endif 501 break; 502 case SSB_BUSTYPE_PCMCIA: 503#ifdef CONFIG_SSB_PCMCIAHOST 504 sdev->irq = bus->host_pcmcia->irq; 505 dev->parent = &bus->host_pcmcia->dev; 506#endif 507 break; 508 case SSB_BUSTYPE_SDIO: 509#ifdef CONFIG_SSB_SDIOHOST 510 dev->parent = &bus->host_sdio->dev; 511#endif 512 break; 513 case SSB_BUSTYPE_SSB: 514 dev->dma_mask = &dev->coherent_dma_mask; 515 sdev->dma_dev = dev; 516 break; 517 } 518 519 sdev->dev = dev; 520 err = device_register(dev); 521 if (err) { 522 pr_err("Could not register %s\n", dev_name(dev)); 523 /* Set dev to NULL to not unregister 524 * dev on error unwinding. */ 525 sdev->dev = NULL; 526 put_device(dev); 527 goto error; 528 } 529 dev_idx++; 530 } 531 532#ifdef CONFIG_SSB_DRIVER_MIPS 533 if (bus->mipscore.pflash.present) { 534 err = platform_device_register(&ssb_pflash_dev); 535 if (err) 536 pr_err("Error registering parallel flash\n"); 537 } 538#endif 539 540#ifdef CONFIG_SSB_SFLASH 541 if (bus->mipscore.sflash.present) { 542 err = platform_device_register(&ssb_sflash_dev); 543 if (err) 544 pr_err("Error registering serial flash\n"); 545 } 546#endif 547 548 return 0; 549error: 550 /* Unwind the already registered devices. */ 551 ssb_devices_unregister(bus); 552 return err; 553} 554 555/* Needs ssb_buses_lock() */ 556static int ssb_attach_queued_buses(void) 557{ 558 struct ssb_bus *bus, *n; 559 int err = 0; 560 int drop_them_all = 0; 561 562 list_for_each_entry_safe(bus, n, &attach_queue, list) { 563 if (drop_them_all) { 564 list_del(&bus->list); 565 continue; 566 } 567 /* Can't init the PCIcore in ssb_bus_register(), as that 568 * is too early in boot for embedded systems 569 * (no udelay() available). So do it here in attach stage. 570 */ 571 err = ssb_bus_powerup(bus, 0); 572 if (err) 573 goto error; 574 ssb_pcicore_init(&bus->pcicore); 575 if (bus->bustype == SSB_BUSTYPE_SSB) 576 ssb_watchdog_register(bus); 577 578 err = ssb_gpio_init(bus); 579 if (err == -ENOTSUPP) 580 pr_debug("GPIO driver not activated\n"); 581 else if (err) 582 pr_debug("Error registering GPIO driver: %i\n", err); 583 584 ssb_bus_may_powerdown(bus); 585 586 err = ssb_devices_register(bus); 587error: 588 if (err) { 589 drop_them_all = 1; 590 list_del(&bus->list); 591 continue; 592 } 593 list_move_tail(&bus->list, &buses); 594 } 595 596 return err; 597} 598 599static int ssb_fetch_invariants(struct ssb_bus *bus, 600 ssb_invariants_func_t get_invariants) 601{ 602 struct ssb_init_invariants iv; 603 int err; 604 605 memset(&iv, 0, sizeof(iv)); 606 err = get_invariants(bus, &iv); 607 if (err) 608 goto out; 609 memcpy(&bus->boardinfo, &iv.boardinfo, sizeof(iv.boardinfo)); 610 memcpy(&bus->sprom, &iv.sprom, sizeof(iv.sprom)); 611 bus->has_cardbus_slot = iv.has_cardbus_slot; 612out: 613 return err; 614} 615 616static int __maybe_unused 617ssb_bus_register(struct ssb_bus *bus, 618 ssb_invariants_func_t get_invariants, 619 unsigned long baseaddr) 620{ 621 int err; 622 623 spin_lock_init(&bus->bar_lock); 624 INIT_LIST_HEAD(&bus->list); 625#ifdef CONFIG_SSB_EMBEDDED 626 spin_lock_init(&bus->gpio_lock); 627#endif 628 629 /* Powerup the bus */ 630 err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1); 631 if (err) 632 goto out; 633 634 /* Init SDIO-host device (if any), before the scan */ 635 err = ssb_sdio_init(bus); 636 if (err) 637 goto err_disable_xtal; 638 639 ssb_buses_lock(); 640 bus->busnumber = next_busnumber; 641 /* Scan for devices (cores) */ 642 err = ssb_bus_scan(bus, baseaddr); 643 if (err) 644 goto err_sdio_exit; 645 646 /* Init PCI-host device (if any) */ 647 err = ssb_pci_init(bus); 648 if (err) 649 goto err_unmap; 650 /* Init PCMCIA-host device (if any) */ 651 err = ssb_pcmcia_init(bus); 652 if (err) 653 goto err_pci_exit; 654 655 /* Initialize basic system devices (if available) */ 656 err = ssb_bus_powerup(bus, 0); 657 if (err) 658 goto err_pcmcia_exit; 659 ssb_chipcommon_init(&bus->chipco); 660 ssb_extif_init(&bus->extif); 661 ssb_mipscore_init(&bus->mipscore); 662 err = ssb_fetch_invariants(bus, get_invariants); 663 if (err) { 664 ssb_bus_may_powerdown(bus); 665 goto err_pcmcia_exit; 666 } 667 ssb_bus_may_powerdown(bus); 668 669 /* Queue it for attach. 670 * See the comment at the ssb_is_early_boot definition. */ 671 list_add_tail(&bus->list, &attach_queue); 672 if (!ssb_is_early_boot) { 673 /* This is not early boot, so we must attach the bus now */ 674 err = ssb_attach_queued_buses(); 675 if (err) 676 goto err_dequeue; 677 } 678 next_busnumber++; 679 ssb_buses_unlock(); 680 681out: 682 return err; 683 684err_dequeue: 685 list_del(&bus->list); 686err_pcmcia_exit: 687 ssb_pcmcia_exit(bus); 688err_pci_exit: 689 ssb_pci_exit(bus); 690err_unmap: 691 ssb_iounmap(bus); 692err_sdio_exit: 693 ssb_sdio_exit(bus); 694err_disable_xtal: 695 ssb_buses_unlock(); 696 ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0); 697 return err; 698} 699 700#ifdef CONFIG_SSB_PCIHOST 701int ssb_bus_pcibus_register(struct ssb_bus *bus, struct pci_dev *host_pci) 702{ 703 int err; 704 705 bus->bustype = SSB_BUSTYPE_PCI; 706 bus->host_pci = host_pci; 707 bus->ops = &ssb_pci_ops; 708 709 err = ssb_bus_register(bus, ssb_pci_get_invariants, 0); 710 if (!err) { 711 dev_info(&host_pci->dev, 712 "Sonics Silicon Backplane found on PCI device %s\n", 713 dev_name(&host_pci->dev)); 714 } else { 715 dev_err(&host_pci->dev, 716 "Failed to register PCI version of SSB with error %d\n", 717 err); 718 } 719 720 return err; 721} 722#endif /* CONFIG_SSB_PCIHOST */ 723 724#ifdef CONFIG_SSB_PCMCIAHOST 725int ssb_bus_pcmciabus_register(struct ssb_bus *bus, 726 struct pcmcia_device *pcmcia_dev, 727 unsigned long baseaddr) 728{ 729 int err; 730 731 bus->bustype = SSB_BUSTYPE_PCMCIA; 732 bus->host_pcmcia = pcmcia_dev; 733 bus->ops = &ssb_pcmcia_ops; 734 735 err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr); 736 if (!err) { 737 dev_info(&pcmcia_dev->dev, 738 "Sonics Silicon Backplane found on PCMCIA device %s\n", 739 pcmcia_dev->devname); 740 } 741 742 return err; 743} 744#endif /* CONFIG_SSB_PCMCIAHOST */ 745 746#ifdef CONFIG_SSB_SDIOHOST 747int ssb_bus_sdiobus_register(struct ssb_bus *bus, struct sdio_func *func, 748 unsigned int quirks) 749{ 750 int err; 751 752 bus->bustype = SSB_BUSTYPE_SDIO; 753 bus->host_sdio = func; 754 bus->ops = &ssb_sdio_ops; 755 bus->quirks = quirks; 756 757 err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0); 758 if (!err) { 759 dev_info(&func->dev, 760 "Sonics Silicon Backplane found on SDIO device %s\n", 761 sdio_func_id(func)); 762 } 763 764 return err; 765} 766EXPORT_SYMBOL(ssb_bus_sdiobus_register); 767#endif /* CONFIG_SSB_PCMCIAHOST */ 768 769#ifdef CONFIG_SSB_HOST_SOC 770int ssb_bus_host_soc_register(struct ssb_bus *bus, unsigned long baseaddr) 771{ 772 int err; 773 774 bus->bustype = SSB_BUSTYPE_SSB; 775 bus->ops = &ssb_host_soc_ops; 776 777 err = ssb_bus_register(bus, ssb_host_soc_get_invariants, baseaddr); 778 if (!err) { 779 pr_info("Sonics Silicon Backplane found at address 0x%08lX\n", 780 baseaddr); 781 } 782 783 return err; 784} 785#endif 786 787int __ssb_driver_register(struct ssb_driver *drv, struct module *owner) 788{ 789 drv->drv.name = drv->name; 790 drv->drv.bus = &ssb_bustype; 791 drv->drv.owner = owner; 792 793 return driver_register(&drv->drv); 794} 795EXPORT_SYMBOL(__ssb_driver_register); 796 797void ssb_driver_unregister(struct ssb_driver *drv) 798{ 799 driver_unregister(&drv->drv); 800} 801EXPORT_SYMBOL(ssb_driver_unregister); 802 803void ssb_set_devtypedata(struct ssb_device *dev, void *data) 804{ 805 struct ssb_bus *bus = dev->bus; 806 struct ssb_device *ent; 807 int i; 808 809 for (i = 0; i < bus->nr_devices; i++) { 810 ent = &(bus->devices[i]); 811 if (ent->id.vendor != dev->id.vendor) 812 continue; 813 if (ent->id.coreid != dev->id.coreid) 814 continue; 815 816 ent->devtypedata = data; 817 } 818} 819EXPORT_SYMBOL(ssb_set_devtypedata); 820 821static u32 clkfactor_f6_resolve(u32 v) 822{ 823 /* map the magic values */ 824 switch (v) { 825 case SSB_CHIPCO_CLK_F6_2: 826 return 2; 827 case SSB_CHIPCO_CLK_F6_3: 828 return 3; 829 case SSB_CHIPCO_CLK_F6_4: 830 return 4; 831 case SSB_CHIPCO_CLK_F6_5: 832 return 5; 833 case SSB_CHIPCO_CLK_F6_6: 834 return 6; 835 case SSB_CHIPCO_CLK_F6_7: 836 return 7; 837 } 838 return 0; 839} 840 841/* Calculate the speed the backplane would run at a given set of clockcontrol values */ 842u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m) 843{ 844 u32 n1, n2, clock, m1, m2, m3, mc; 845 846 n1 = (n & SSB_CHIPCO_CLK_N1); 847 n2 = ((n & SSB_CHIPCO_CLK_N2) >> SSB_CHIPCO_CLK_N2_SHIFT); 848 849 switch (plltype) { 850 case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */ 851 if (m & SSB_CHIPCO_CLK_T6_MMASK) 852 return SSB_CHIPCO_CLK_T6_M1; 853 return SSB_CHIPCO_CLK_T6_M0; 854 case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */ 855 case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ 856 case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */ 857 case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */ 858 n1 = clkfactor_f6_resolve(n1); 859 n2 += SSB_CHIPCO_CLK_F5_BIAS; 860 break; 861 case SSB_PLLTYPE_2: /* 48Mhz, 4 dividers */ 862 n1 += SSB_CHIPCO_CLK_T2_BIAS; 863 n2 += SSB_CHIPCO_CLK_T2_BIAS; 864 WARN_ON(!((n1 >= 2) && (n1 <= 7))); 865 WARN_ON(!((n2 >= 5) && (n2 <= 23))); 866 break; 867 case SSB_PLLTYPE_5: /* 25Mhz, 4 dividers */ 868 return 100000000; 869 default: 870 WARN_ON(1); 871 } 872 873 switch (plltype) { 874 case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ 875 case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */ 876 clock = SSB_CHIPCO_CLK_BASE2 * n1 * n2; 877 break; 878 default: 879 clock = SSB_CHIPCO_CLK_BASE1 * n1 * n2; 880 } 881 if (!clock) 882 return 0; 883 884 m1 = (m & SSB_CHIPCO_CLK_M1); 885 m2 = ((m & SSB_CHIPCO_CLK_M2) >> SSB_CHIPCO_CLK_M2_SHIFT); 886 m3 = ((m & SSB_CHIPCO_CLK_M3) >> SSB_CHIPCO_CLK_M3_SHIFT); 887 mc = ((m & SSB_CHIPCO_CLK_MC) >> SSB_CHIPCO_CLK_MC_SHIFT); 888 889 switch (plltype) { 890 case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */ 891 case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ 892 case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */ 893 case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */ 894 m1 = clkfactor_f6_resolve(m1); 895 if ((plltype == SSB_PLLTYPE_1) || 896 (plltype == SSB_PLLTYPE_3)) 897 m2 += SSB_CHIPCO_CLK_F5_BIAS; 898 else 899 m2 = clkfactor_f6_resolve(m2); 900 m3 = clkfactor_f6_resolve(m3); 901 902 switch (mc) { 903 case SSB_CHIPCO_CLK_MC_BYPASS: 904 return clock; 905 case SSB_CHIPCO_CLK_MC_M1: 906 return (clock / m1); 907 case SSB_CHIPCO_CLK_MC_M1M2: 908 return (clock / (m1 * m2)); 909 case SSB_CHIPCO_CLK_MC_M1M2M3: 910 return (clock / (m1 * m2 * m3)); 911 case SSB_CHIPCO_CLK_MC_M1M3: 912 return (clock / (m1 * m3)); 913 } 914 return 0; 915 case SSB_PLLTYPE_2: 916 m1 += SSB_CHIPCO_CLK_T2_BIAS; 917 m2 += SSB_CHIPCO_CLK_T2M2_BIAS; 918 m3 += SSB_CHIPCO_CLK_T2_BIAS; 919 WARN_ON(!((m1 >= 2) && (m1 <= 7))); 920 WARN_ON(!((m2 >= 3) && (m2 <= 10))); 921 WARN_ON(!((m3 >= 2) && (m3 <= 7))); 922 923 if (!(mc & SSB_CHIPCO_CLK_T2MC_M1BYP)) 924 clock /= m1; 925 if (!(mc & SSB_CHIPCO_CLK_T2MC_M2BYP)) 926 clock /= m2; 927 if (!(mc & SSB_CHIPCO_CLK_T2MC_M3BYP)) 928 clock /= m3; 929 return clock; 930 default: 931 WARN_ON(1); 932 } 933 return 0; 934} 935 936/* Get the current speed the backplane is running at */ 937u32 ssb_clockspeed(struct ssb_bus *bus) 938{ 939 u32 rate; 940 u32 plltype; 941 u32 clkctl_n, clkctl_m; 942 943 if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) 944 return ssb_pmu_get_controlclock(&bus->chipco); 945 946 if (ssb_extif_available(&bus->extif)) 947 ssb_extif_get_clockcontrol(&bus->extif, &plltype, 948 &clkctl_n, &clkctl_m); 949 else if (bus->chipco.dev) 950 ssb_chipco_get_clockcontrol(&bus->chipco, &plltype, 951 &clkctl_n, &clkctl_m); 952 else 953 return 0; 954 955 if (bus->chip_id == 0x5365) { 956 rate = 100000000; 957 } else { 958 rate = ssb_calc_clock_rate(plltype, clkctl_n, clkctl_m); 959 if (plltype == SSB_PLLTYPE_3) /* 25Mhz, 2 dividers */ 960 rate /= 2; 961 } 962 963 return rate; 964} 965EXPORT_SYMBOL(ssb_clockspeed); 966 967static u32 ssb_tmslow_reject_bitmask(struct ssb_device *dev) 968{ 969 u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV; 970 971 /* The REJECT bit seems to be different for Backplane rev 2.3 */ 972 switch (rev) { 973 case SSB_IDLOW_SSBREV_22: 974 case SSB_IDLOW_SSBREV_24: 975 case SSB_IDLOW_SSBREV_26: 976 return SSB_TMSLOW_REJECT; 977 case SSB_IDLOW_SSBREV_23: 978 return SSB_TMSLOW_REJECT_23; 979 case SSB_IDLOW_SSBREV_25: /* TODO - find the proper REJECT bit */ 980 case SSB_IDLOW_SSBREV_27: /* same here */ 981 return SSB_TMSLOW_REJECT; /* this is a guess */ 982 case SSB_IDLOW_SSBREV: 983 break; 984 default: 985 WARN(1, KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev); 986 } 987 return (SSB_TMSLOW_REJECT | SSB_TMSLOW_REJECT_23); 988} 989 990int ssb_device_is_enabled(struct ssb_device *dev) 991{ 992 u32 val; 993 u32 reject; 994 995 reject = ssb_tmslow_reject_bitmask(dev); 996 val = ssb_read32(dev, SSB_TMSLOW); 997 val &= SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET | reject; 998 999 return (val == SSB_TMSLOW_CLOCK); 1000} 1001EXPORT_SYMBOL(ssb_device_is_enabled); 1002 1003static void ssb_flush_tmslow(struct ssb_device *dev) 1004{ 1005 /* Make _really_ sure the device has finished the TMSLOW 1006 * register write transaction, as we risk running into 1007 * a machine check exception otherwise. 1008 * Do this by reading the register back to commit the 1009 * PCI write and delay an additional usec for the device 1010 * to react to the change. */ 1011 ssb_read32(dev, SSB_TMSLOW); 1012 udelay(1); 1013} 1014 1015void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags) 1016{ 1017 u32 val; 1018 1019 ssb_device_disable(dev, core_specific_flags); 1020 ssb_write32(dev, SSB_TMSLOW, 1021 SSB_TMSLOW_RESET | SSB_TMSLOW_CLOCK | 1022 SSB_TMSLOW_FGC | core_specific_flags); 1023 ssb_flush_tmslow(dev); 1024 1025 /* Clear SERR if set. This is a hw bug workaround. */ 1026 if (ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_SERR) 1027 ssb_write32(dev, SSB_TMSHIGH, 0); 1028 1029 val = ssb_read32(dev, SSB_IMSTATE); 1030 if (val & (SSB_IMSTATE_IBE | SSB_IMSTATE_TO)) { 1031 val &= ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO); 1032 ssb_write32(dev, SSB_IMSTATE, val); 1033 } 1034 1035 ssb_write32(dev, SSB_TMSLOW, 1036 SSB_TMSLOW_CLOCK | SSB_TMSLOW_FGC | 1037 core_specific_flags); 1038 ssb_flush_tmslow(dev); 1039 1040 ssb_write32(dev, SSB_TMSLOW, SSB_TMSLOW_CLOCK | 1041 core_specific_flags); 1042 ssb_flush_tmslow(dev); 1043} 1044EXPORT_SYMBOL(ssb_device_enable); 1045 1046/* Wait for bitmask in a register to get set or cleared. 1047 * timeout is in units of ten-microseconds */ 1048static int ssb_wait_bits(struct ssb_device *dev, u16 reg, u32 bitmask, 1049 int timeout, int set) 1050{ 1051 int i; 1052 u32 val; 1053 1054 for (i = 0; i < timeout; i++) { 1055 val = ssb_read32(dev, reg); 1056 if (set) { 1057 if ((val & bitmask) == bitmask) 1058 return 0; 1059 } else { 1060 if (!(val & bitmask)) 1061 return 0; 1062 } 1063 udelay(10); 1064 } 1065 dev_err(dev->dev, 1066 "Timeout waiting for bitmask %08X on register %04X to %s\n", 1067 bitmask, reg, set ? "set" : "clear"); 1068 1069 return -ETIMEDOUT; 1070} 1071 1072void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags) 1073{ 1074 u32 reject, val; 1075 1076 if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_RESET) 1077 return; 1078 1079 reject = ssb_tmslow_reject_bitmask(dev); 1080 1081 if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_CLOCK) { 1082 ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK); 1083 ssb_wait_bits(dev, SSB_TMSLOW, reject, 1000, 1); 1084 ssb_wait_bits(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0); 1085 1086 if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) { 1087 val = ssb_read32(dev, SSB_IMSTATE); 1088 val |= SSB_IMSTATE_REJECT; 1089 ssb_write32(dev, SSB_IMSTATE, val); 1090 ssb_wait_bits(dev, SSB_IMSTATE, SSB_IMSTATE_BUSY, 1000, 1091 0); 1092 } 1093 1094 ssb_write32(dev, SSB_TMSLOW, 1095 SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | 1096 reject | SSB_TMSLOW_RESET | 1097 core_specific_flags); 1098 ssb_flush_tmslow(dev); 1099 1100 if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) { 1101 val = ssb_read32(dev, SSB_IMSTATE); 1102 val &= ~SSB_IMSTATE_REJECT; 1103 ssb_write32(dev, SSB_IMSTATE, val); 1104 } 1105 } 1106 1107 ssb_write32(dev, SSB_TMSLOW, 1108 reject | SSB_TMSLOW_RESET | 1109 core_specific_flags); 1110 ssb_flush_tmslow(dev); 1111} 1112EXPORT_SYMBOL(ssb_device_disable); 1113 1114/* Some chipsets need routing known for PCIe and 64-bit DMA */ 1115static bool ssb_dma_translation_special_bit(struct ssb_device *dev) 1116{ 1117 u16 chip_id = dev->bus->chip_id; 1118 1119 if (dev->id.coreid == SSB_DEV_80211) { 1120 return (chip_id == 0x4322 || chip_id == 43221 || 1121 chip_id == 43231 || chip_id == 43222); 1122 } 1123 1124 return false; 1125} 1126 1127u32 ssb_dma_translation(struct ssb_device *dev) 1128{ 1129 switch (dev->bus->bustype) { 1130 case SSB_BUSTYPE_SSB: 1131 return 0; 1132 case SSB_BUSTYPE_PCI: 1133 if (pci_is_pcie(dev->bus->host_pci) && 1134 ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) { 1135 return SSB_PCIE_DMA_H32; 1136 } else { 1137 if (ssb_dma_translation_special_bit(dev)) 1138 return SSB_PCIE_DMA_H32; 1139 else 1140 return SSB_PCI_DMA; 1141 } 1142 default: 1143 __ssb_dma_not_implemented(dev); 1144 } 1145 return 0; 1146} 1147EXPORT_SYMBOL(ssb_dma_translation); 1148 1149int ssb_bus_may_powerdown(struct ssb_bus *bus) 1150{ 1151 struct ssb_chipcommon *cc; 1152 int err = 0; 1153 1154 /* On buses where more than one core may be working 1155 * at a time, we must not powerdown stuff if there are 1156 * still cores that may want to run. */ 1157 if (bus->bustype == SSB_BUSTYPE_SSB) 1158 goto out; 1159 1160 cc = &bus->chipco; 1161 1162 if (!cc->dev) 1163 goto out; 1164 if (cc->dev->id.revision < 5) 1165 goto out; 1166 1167 ssb_chipco_set_clockmode(cc, SSB_CLKMODE_SLOW); 1168 err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0); 1169 if (err) 1170 goto error; 1171out: 1172 bus->powered_up = 0; 1173 return err; 1174error: 1175 pr_err("Bus powerdown failed\n"); 1176 goto out; 1177} 1178EXPORT_SYMBOL(ssb_bus_may_powerdown); 1179 1180int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl) 1181{ 1182 int err; 1183 enum ssb_clkmode mode; 1184 1185 err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1); 1186 if (err) 1187 goto error; 1188 1189 bus->powered_up = 1; 1190 1191 mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST; 1192 ssb_chipco_set_clockmode(&bus->chipco, mode); 1193 1194 return 0; 1195error: 1196 pr_err("Bus powerup failed\n"); 1197 return err; 1198} 1199EXPORT_SYMBOL(ssb_bus_powerup); 1200 1201static void ssb_broadcast_value(struct ssb_device *dev, 1202 u32 address, u32 data) 1203{ 1204#ifdef CONFIG_SSB_DRIVER_PCICORE 1205 /* This is used for both, PCI and ChipCommon core, so be careful. */ 1206 BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR); 1207 BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA); 1208#endif 1209 1210 ssb_write32(dev, SSB_CHIPCO_BCAST_ADDR, address); 1211 ssb_read32(dev, SSB_CHIPCO_BCAST_ADDR); /* flush */ 1212 ssb_write32(dev, SSB_CHIPCO_BCAST_DATA, data); 1213 ssb_read32(dev, SSB_CHIPCO_BCAST_DATA); /* flush */ 1214} 1215 1216void ssb_commit_settings(struct ssb_bus *bus) 1217{ 1218 struct ssb_device *dev; 1219 1220#ifdef CONFIG_SSB_DRIVER_PCICORE 1221 dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev; 1222#else 1223 dev = bus->chipco.dev; 1224#endif 1225 if (WARN_ON(!dev)) 1226 return; 1227 /* This forces an update of the cached registers. */ 1228 ssb_broadcast_value(dev, 0xFD8, 0); 1229} 1230EXPORT_SYMBOL(ssb_commit_settings); 1231 1232u32 ssb_admatch_base(u32 adm) 1233{ 1234 u32 base = 0; 1235 1236 switch (adm & SSB_ADM_TYPE) { 1237 case SSB_ADM_TYPE0: 1238 base = (adm & SSB_ADM_BASE0); 1239 break; 1240 case SSB_ADM_TYPE1: 1241 WARN_ON(adm & SSB_ADM_NEG); /* unsupported */ 1242 base = (adm & SSB_ADM_BASE1); 1243 break; 1244 case SSB_ADM_TYPE2: 1245 WARN_ON(adm & SSB_ADM_NEG); /* unsupported */ 1246 base = (adm & SSB_ADM_BASE2); 1247 break; 1248 default: 1249 WARN_ON(1); 1250 } 1251 1252 return base; 1253} 1254EXPORT_SYMBOL(ssb_admatch_base); 1255 1256u32 ssb_admatch_size(u32 adm) 1257{ 1258 u32 size = 0; 1259 1260 switch (adm & SSB_ADM_TYPE) { 1261 case SSB_ADM_TYPE0: 1262 size = ((adm & SSB_ADM_SZ0) >> SSB_ADM_SZ0_SHIFT); 1263 break; 1264 case SSB_ADM_TYPE1: 1265 WARN_ON(adm & SSB_ADM_NEG); /* unsupported */ 1266 size = ((adm & SSB_ADM_SZ1) >> SSB_ADM_SZ1_SHIFT); 1267 break; 1268 case SSB_ADM_TYPE2: 1269 WARN_ON(adm & SSB_ADM_NEG); /* unsupported */ 1270 size = ((adm & SSB_ADM_SZ2) >> SSB_ADM_SZ2_SHIFT); 1271 break; 1272 default: 1273 WARN_ON(1); 1274 } 1275 size = (1 << (size + 1)); 1276 1277 return size; 1278} 1279EXPORT_SYMBOL(ssb_admatch_size); 1280 1281static int __init ssb_modinit(void) 1282{ 1283 int err; 1284 1285 /* See the comment at the ssb_is_early_boot definition */ 1286 ssb_is_early_boot = 0; 1287 err = bus_register(&ssb_bustype); 1288 if (err) 1289 return err; 1290 1291 /* Maybe we already registered some buses at early boot. 1292 * Check for this and attach them 1293 */ 1294 ssb_buses_lock(); 1295 err = ssb_attach_queued_buses(); 1296 ssb_buses_unlock(); 1297 if (err) { 1298 bus_unregister(&ssb_bustype); 1299 goto out; 1300 } 1301 1302 err = b43_pci_ssb_bridge_init(); 1303 if (err) { 1304 pr_err("Broadcom 43xx PCI-SSB-bridge initialization failed\n"); 1305 /* don't fail SSB init because of this */ 1306 err = 0; 1307 } 1308 err = ssb_host_pcmcia_init(); 1309 if (err) { 1310 pr_err("PCMCIA host initialization failed\n"); 1311 /* don't fail SSB init because of this */ 1312 err = 0; 1313 } 1314 err = ssb_gige_init(); 1315 if (err) { 1316 pr_err("SSB Broadcom Gigabit Ethernet driver initialization failed\n"); 1317 /* don't fail SSB init because of this */ 1318 err = 0; 1319 } 1320out: 1321 return err; 1322} 1323/* ssb must be initialized after PCI but before the ssb drivers. 1324 * That means we must use some initcall between subsys_initcall 1325 * and device_initcall. */ 1326fs_initcall(ssb_modinit); 1327 1328static void __exit ssb_modexit(void) 1329{ 1330 ssb_gige_exit(); 1331 ssb_host_pcmcia_exit(); 1332 b43_pci_ssb_bridge_exit(); 1333 bus_unregister(&ssb_bustype); 1334} 1335module_exit(ssb_modexit) 1336