1/* 2 * PMC-Sierra PM8001/8081/8088/8089 SAS/SATA based host adapters driver 3 * 4 * Copyright (c) 2008-2009 USI Co., Ltd. 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions, and the following disclaimer, 12 * without modification. 13 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 14 * substantially similar to the "NO WARRANTY" disclaimer below 15 * ("Disclaimer") and any redistribution must be conditioned upon 16 * including a substantially similar Disclaimer requirement for further 17 * binary redistribution. 18 * 3. Neither the names of the above-listed copyright holders nor the names 19 * of any contributors may be used to endorse or promote products derived 20 * from this software without specific prior written permission. 21 * 22 * Alternatively, this software may be distributed under the terms of the 23 * GNU General Public License ("GPL") version 2 as published by the Free 24 * Software Foundation. 25 * 26 * NO WARRANTY 27 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 28 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 29 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 30 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 31 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 32 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 33 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 34 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 35 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 36 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 37 * POSSIBILITY OF SUCH DAMAGES. 38 * 39 */ 40 41#include <linux/slab.h> 42#include "pm8001_sas.h" 43 44/** 45 * pm8001_find_tag - from sas task to find out tag that belongs to this task 46 * @task: the task sent to the LLDD 47 * @tag: the found tag associated with the task 48 */ 49static int pm8001_find_tag(struct sas_task *task, u32 *tag) 50{ 51 if (task->lldd_task) { 52 struct pm8001_ccb_info *ccb; 53 ccb = task->lldd_task; 54 *tag = ccb->ccb_tag; 55 return 1; 56 } 57 return 0; 58} 59 60/** 61 * pm8001_tag_free - free the no more needed tag 62 * @pm8001_ha: our hba struct 63 * @tag: the found tag associated with the task 64 */ 65void pm8001_tag_free(struct pm8001_hba_info *pm8001_ha, u32 tag) 66{ 67 void *bitmap = pm8001_ha->tags; 68 clear_bit(tag, bitmap); 69} 70 71/** 72 * pm8001_tag_alloc - allocate a empty tag for task used. 73 * @pm8001_ha: our hba struct 74 * @tag_out: the found empty tag . 75 */ 76inline int pm8001_tag_alloc(struct pm8001_hba_info *pm8001_ha, u32 *tag_out) 77{ 78 unsigned int tag; 79 void *bitmap = pm8001_ha->tags; 80 unsigned long flags; 81 82 spin_lock_irqsave(&pm8001_ha->bitmap_lock, flags); 83 tag = find_first_zero_bit(bitmap, pm8001_ha->tags_num); 84 if (tag >= pm8001_ha->tags_num) { 85 spin_unlock_irqrestore(&pm8001_ha->bitmap_lock, flags); 86 return -SAS_QUEUE_FULL; 87 } 88 set_bit(tag, bitmap); 89 spin_unlock_irqrestore(&pm8001_ha->bitmap_lock, flags); 90 *tag_out = tag; 91 return 0; 92} 93 94void pm8001_tag_init(struct pm8001_hba_info *pm8001_ha) 95{ 96 int i; 97 for (i = 0; i < pm8001_ha->tags_num; ++i) 98 pm8001_tag_free(pm8001_ha, i); 99} 100 101 /** 102 * pm8001_mem_alloc - allocate memory for pm8001. 103 * @pdev: pci device. 104 * @virt_addr: the allocated virtual address 105 * @pphys_addr_hi: the physical address high byte address. 106 * @pphys_addr_lo: the physical address low byte address. 107 * @mem_size: memory size. 108 */ 109int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr, 110 dma_addr_t *pphys_addr, u32 *pphys_addr_hi, 111 u32 *pphys_addr_lo, u32 mem_size, u32 align) 112{ 113 caddr_t mem_virt_alloc; 114 dma_addr_t mem_dma_handle; 115 u64 phys_align; 116 u64 align_offset = 0; 117 if (align) 118 align_offset = (dma_addr_t)align - 1; 119 mem_virt_alloc = dma_alloc_coherent(&pdev->dev, mem_size + align, 120 &mem_dma_handle, GFP_KERNEL); 121 if (!mem_virt_alloc) { 122 pr_err("pm80xx: memory allocation error\n"); 123 return -1; 124 } 125 *pphys_addr = mem_dma_handle; 126 phys_align = (*pphys_addr + align_offset) & ~align_offset; 127 *virt_addr = (void *)mem_virt_alloc + phys_align - *pphys_addr; 128 *pphys_addr_hi = upper_32_bits(phys_align); 129 *pphys_addr_lo = lower_32_bits(phys_align); 130 return 0; 131} 132 133/** 134 * pm8001_find_ha_by_dev - from domain device which come from sas layer to 135 * find out our hba struct. 136 * @dev: the domain device which from sas layer. 137 */ 138static 139struct pm8001_hba_info *pm8001_find_ha_by_dev(struct domain_device *dev) 140{ 141 struct sas_ha_struct *sha = dev->port->ha; 142 struct pm8001_hba_info *pm8001_ha = sha->lldd_ha; 143 return pm8001_ha; 144} 145 146/** 147 * pm8001_phy_control - this function should be registered to 148 * sas_domain_function_template to provide libsas used, note: this is just 149 * control the HBA phy rather than other expander phy if you want control 150 * other phy, you should use SMP command. 151 * @sas_phy: which phy in HBA phys. 152 * @func: the operation. 153 * @funcdata: always NULL. 154 */ 155int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func, 156 void *funcdata) 157{ 158 int rc = 0, phy_id = sas_phy->id; 159 struct pm8001_hba_info *pm8001_ha = NULL; 160 struct sas_phy_linkrates *rates; 161 struct pm8001_phy *phy; 162 DECLARE_COMPLETION_ONSTACK(completion); 163 unsigned long flags; 164 pm8001_ha = sas_phy->ha->lldd_ha; 165 phy = &pm8001_ha->phy[phy_id]; 166 pm8001_ha->phy[phy_id].enable_completion = &completion; 167 switch (func) { 168 case PHY_FUNC_SET_LINK_RATE: 169 rates = funcdata; 170 if (rates->minimum_linkrate) { 171 pm8001_ha->phy[phy_id].minimum_linkrate = 172 rates->minimum_linkrate; 173 } 174 if (rates->maximum_linkrate) { 175 pm8001_ha->phy[phy_id].maximum_linkrate = 176 rates->maximum_linkrate; 177 } 178 if (pm8001_ha->phy[phy_id].phy_state == PHY_LINK_DISABLE) { 179 PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id); 180 wait_for_completion(&completion); 181 } 182 PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id, 183 PHY_LINK_RESET); 184 break; 185 case PHY_FUNC_HARD_RESET: 186 if (pm8001_ha->phy[phy_id].phy_state == PHY_LINK_DISABLE) { 187 PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id); 188 wait_for_completion(&completion); 189 } 190 PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id, 191 PHY_HARD_RESET); 192 break; 193 case PHY_FUNC_LINK_RESET: 194 if (pm8001_ha->phy[phy_id].phy_state == PHY_LINK_DISABLE) { 195 PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id); 196 wait_for_completion(&completion); 197 } 198 PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id, 199 PHY_LINK_RESET); 200 break; 201 case PHY_FUNC_RELEASE_SPINUP_HOLD: 202 PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id, 203 PHY_LINK_RESET); 204 break; 205 case PHY_FUNC_DISABLE: 206 if (pm8001_ha->chip_id != chip_8001) { 207 if (pm8001_ha->phy[phy_id].phy_state == 208 PHY_STATE_LINK_UP_SPCV) { 209 sas_phy_disconnected(&phy->sas_phy); 210 sas_notify_phy_event(&phy->sas_phy, 211 PHYE_LOSS_OF_SIGNAL); 212 phy->phy_attached = 0; 213 } 214 } else { 215 if (pm8001_ha->phy[phy_id].phy_state == 216 PHY_STATE_LINK_UP_SPC) { 217 sas_phy_disconnected(&phy->sas_phy); 218 sas_notify_phy_event(&phy->sas_phy, 219 PHYE_LOSS_OF_SIGNAL); 220 phy->phy_attached = 0; 221 } 222 } 223 PM8001_CHIP_DISP->phy_stop_req(pm8001_ha, phy_id); 224 break; 225 case PHY_FUNC_GET_EVENTS: 226 spin_lock_irqsave(&pm8001_ha->lock, flags); 227 if (pm8001_ha->chip_id == chip_8001) { 228 if (-1 == pm8001_bar4_shift(pm8001_ha, 229 (phy_id < 4) ? 0x30000 : 0x40000)) { 230 spin_unlock_irqrestore(&pm8001_ha->lock, flags); 231 return -EINVAL; 232 } 233 } 234 { 235 struct sas_phy *phy = sas_phy->phy; 236 uint32_t *qp = (uint32_t *)(((char *) 237 pm8001_ha->io_mem[2].memvirtaddr) 238 + 0x1034 + (0x4000 * (phy_id & 3))); 239 240 phy->invalid_dword_count = qp[0]; 241 phy->running_disparity_error_count = qp[1]; 242 phy->loss_of_dword_sync_count = qp[3]; 243 phy->phy_reset_problem_count = qp[4]; 244 } 245 if (pm8001_ha->chip_id == chip_8001) 246 pm8001_bar4_shift(pm8001_ha, 0); 247 spin_unlock_irqrestore(&pm8001_ha->lock, flags); 248 return 0; 249 default: 250 pm8001_dbg(pm8001_ha, DEVIO, "func 0x%x\n", func); 251 rc = -EOPNOTSUPP; 252 } 253 msleep(300); 254 return rc; 255} 256 257/** 258 * pm8001_scan_start - we should enable all HBA phys by sending the phy_start 259 * command to HBA. 260 * @shost: the scsi host data. 261 */ 262void pm8001_scan_start(struct Scsi_Host *shost) 263{ 264 int i; 265 struct pm8001_hba_info *pm8001_ha; 266 struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost); 267 DECLARE_COMPLETION_ONSTACK(completion); 268 pm8001_ha = sha->lldd_ha; 269 /* SAS_RE_INITIALIZATION not available in SPCv/ve */ 270 if (pm8001_ha->chip_id == chip_8001) 271 PM8001_CHIP_DISP->sas_re_init_req(pm8001_ha); 272 for (i = 0; i < pm8001_ha->chip->n_phy; ++i) { 273 pm8001_ha->phy[i].enable_completion = &completion; 274 PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i); 275 wait_for_completion(&completion); 276 msleep(300); 277 } 278} 279 280int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time) 281{ 282 struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost); 283 284 /* give the phy enabling interrupt event time to come in (1s 285 * is empirically about all it takes) */ 286 if (time < HZ) 287 return 0; 288 /* Wait for discovery to finish */ 289 sas_drain_work(ha); 290 return 1; 291} 292 293/** 294 * pm8001_task_prep_smp - the dispatcher function, prepare data for smp task 295 * @pm8001_ha: our hba card information 296 * @ccb: the ccb which attached to smp task 297 */ 298static int pm8001_task_prep_smp(struct pm8001_hba_info *pm8001_ha, 299 struct pm8001_ccb_info *ccb) 300{ 301 return PM8001_CHIP_DISP->smp_req(pm8001_ha, ccb); 302} 303 304u32 pm8001_get_ncq_tag(struct sas_task *task, u32 *tag) 305{ 306 struct ata_queued_cmd *qc = task->uldd_task; 307 if (qc) { 308 if (qc->tf.command == ATA_CMD_FPDMA_WRITE || 309 qc->tf.command == ATA_CMD_FPDMA_READ || 310 qc->tf.command == ATA_CMD_FPDMA_RECV || 311 qc->tf.command == ATA_CMD_FPDMA_SEND || 312 qc->tf.command == ATA_CMD_NCQ_NON_DATA) { 313 *tag = qc->tag; 314 return 1; 315 } 316 } 317 return 0; 318} 319 320/** 321 * pm8001_task_prep_ata - the dispatcher function, prepare data for sata task 322 * @pm8001_ha: our hba card information 323 * @ccb: the ccb which attached to sata task 324 */ 325static int pm8001_task_prep_ata(struct pm8001_hba_info *pm8001_ha, 326 struct pm8001_ccb_info *ccb) 327{ 328 return PM8001_CHIP_DISP->sata_req(pm8001_ha, ccb); 329} 330 331/** 332 * pm8001_task_prep_ssp_tm - the dispatcher function, prepare task management data 333 * @pm8001_ha: our hba card information 334 * @ccb: the ccb which attached to TM 335 * @tmf: the task management IU 336 */ 337static int pm8001_task_prep_ssp_tm(struct pm8001_hba_info *pm8001_ha, 338 struct pm8001_ccb_info *ccb, struct pm8001_tmf_task *tmf) 339{ 340 return PM8001_CHIP_DISP->ssp_tm_req(pm8001_ha, ccb, tmf); 341} 342 343/** 344 * pm8001_task_prep_ssp - the dispatcher function,prepare ssp data for ssp task 345 * @pm8001_ha: our hba card information 346 * @ccb: the ccb which attached to ssp task 347 */ 348static int pm8001_task_prep_ssp(struct pm8001_hba_info *pm8001_ha, 349 struct pm8001_ccb_info *ccb) 350{ 351 return PM8001_CHIP_DISP->ssp_io_req(pm8001_ha, ccb); 352} 353 354 /* Find the local port id that's attached to this device */ 355static int sas_find_local_port_id(struct domain_device *dev) 356{ 357 struct domain_device *pdev = dev->parent; 358 359 /* Directly attached device */ 360 if (!pdev) 361 return dev->port->id; 362 while (pdev) { 363 struct domain_device *pdev_p = pdev->parent; 364 if (!pdev_p) 365 return pdev->port->id; 366 pdev = pdev->parent; 367 } 368 return 0; 369} 370 371#define DEV_IS_GONE(pm8001_dev) \ 372 ((!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED))) 373/** 374 * pm8001_task_exec - queue the task(ssp, smp && ata) to the hardware. 375 * @task: the task to be execute. 376 * @gfp_flags: gfp_flags. 377 * @is_tmf: if it is task management task. 378 * @tmf: the task management IU 379 */ 380static int pm8001_task_exec(struct sas_task *task, 381 gfp_t gfp_flags, int is_tmf, struct pm8001_tmf_task *tmf) 382{ 383 struct domain_device *dev = task->dev; 384 struct pm8001_hba_info *pm8001_ha; 385 struct pm8001_device *pm8001_dev; 386 struct pm8001_port *port = NULL; 387 struct sas_task *t = task; 388 struct pm8001_ccb_info *ccb; 389 u32 tag = 0xdeadbeef, rc = 0, n_elem = 0; 390 unsigned long flags = 0; 391 enum sas_protocol task_proto = t->task_proto; 392 393 if (!dev->port) { 394 struct task_status_struct *tsm = &t->task_status; 395 tsm->resp = SAS_TASK_UNDELIVERED; 396 tsm->stat = SAS_PHY_DOWN; 397 if (dev->dev_type != SAS_SATA_DEV) 398 t->task_done(t); 399 return 0; 400 } 401 pm8001_ha = pm8001_find_ha_by_dev(task->dev); 402 if (pm8001_ha->controller_fatal_error) { 403 struct task_status_struct *ts = &t->task_status; 404 405 ts->resp = SAS_TASK_UNDELIVERED; 406 t->task_done(t); 407 return 0; 408 } 409 pm8001_dbg(pm8001_ha, IO, "pm8001_task_exec device\n"); 410 spin_lock_irqsave(&pm8001_ha->lock, flags); 411 do { 412 dev = t->dev; 413 pm8001_dev = dev->lldd_dev; 414 port = &pm8001_ha->port[sas_find_local_port_id(dev)]; 415 if (DEV_IS_GONE(pm8001_dev) || !port->port_attached) { 416 if (sas_protocol_ata(task_proto)) { 417 struct task_status_struct *ts = &t->task_status; 418 ts->resp = SAS_TASK_UNDELIVERED; 419 ts->stat = SAS_PHY_DOWN; 420 421 spin_unlock_irqrestore(&pm8001_ha->lock, flags); 422 t->task_done(t); 423 spin_lock_irqsave(&pm8001_ha->lock, flags); 424 continue; 425 } else { 426 struct task_status_struct *ts = &t->task_status; 427 ts->resp = SAS_TASK_UNDELIVERED; 428 ts->stat = SAS_PHY_DOWN; 429 t->task_done(t); 430 continue; 431 } 432 } 433 rc = pm8001_tag_alloc(pm8001_ha, &tag); 434 if (rc) 435 goto err_out; 436 ccb = &pm8001_ha->ccb_info[tag]; 437 438 if (!sas_protocol_ata(task_proto)) { 439 if (t->num_scatter) { 440 n_elem = dma_map_sg(pm8001_ha->dev, 441 t->scatter, 442 t->num_scatter, 443 t->data_dir); 444 if (!n_elem) { 445 rc = -ENOMEM; 446 goto err_out_tag; 447 } 448 } 449 } else { 450 n_elem = t->num_scatter; 451 } 452 453 t->lldd_task = ccb; 454 ccb->n_elem = n_elem; 455 ccb->ccb_tag = tag; 456 ccb->task = t; 457 ccb->device = pm8001_dev; 458 switch (task_proto) { 459 case SAS_PROTOCOL_SMP: 460 atomic_inc(&pm8001_dev->running_req); 461 rc = pm8001_task_prep_smp(pm8001_ha, ccb); 462 break; 463 case SAS_PROTOCOL_SSP: 464 atomic_inc(&pm8001_dev->running_req); 465 if (is_tmf) 466 rc = pm8001_task_prep_ssp_tm(pm8001_ha, 467 ccb, tmf); 468 else 469 rc = pm8001_task_prep_ssp(pm8001_ha, ccb); 470 break; 471 case SAS_PROTOCOL_SATA: 472 case SAS_PROTOCOL_STP: 473 atomic_inc(&pm8001_dev->running_req); 474 rc = pm8001_task_prep_ata(pm8001_ha, ccb); 475 break; 476 default: 477 dev_printk(KERN_ERR, pm8001_ha->dev, 478 "unknown sas_task proto: 0x%x\n", task_proto); 479 rc = -EINVAL; 480 break; 481 } 482 483 if (rc) { 484 pm8001_dbg(pm8001_ha, IO, "rc is %x\n", rc); 485 atomic_dec(&pm8001_dev->running_req); 486 goto err_out_tag; 487 } 488 /* TODO: select normal or high priority */ 489 spin_lock(&t->task_state_lock); 490 t->task_state_flags |= SAS_TASK_AT_INITIATOR; 491 spin_unlock(&t->task_state_lock); 492 } while (0); 493 rc = 0; 494 goto out_done; 495 496err_out_tag: 497 pm8001_tag_free(pm8001_ha, tag); 498err_out: 499 dev_printk(KERN_ERR, pm8001_ha->dev, "pm8001 exec failed[%d]!\n", rc); 500 if (!sas_protocol_ata(task_proto)) 501 if (n_elem) 502 dma_unmap_sg(pm8001_ha->dev, t->scatter, t->num_scatter, 503 t->data_dir); 504out_done: 505 spin_unlock_irqrestore(&pm8001_ha->lock, flags); 506 return rc; 507} 508 509/** 510 * pm8001_queue_command - register for upper layer used, all IO commands sent 511 * to HBA are from this interface. 512 * @task: the task to be execute. 513 * @gfp_flags: gfp_flags 514 */ 515int pm8001_queue_command(struct sas_task *task, gfp_t gfp_flags) 516{ 517 return pm8001_task_exec(task, gfp_flags, 0, NULL); 518} 519 520/** 521 * pm8001_ccb_task_free - free the sg for ssp and smp command, free the ccb. 522 * @pm8001_ha: our hba card information 523 * @ccb: the ccb which attached to ssp task 524 * @task: the task to be free. 525 * @ccb_idx: ccb index. 526 */ 527void pm8001_ccb_task_free(struct pm8001_hba_info *pm8001_ha, 528 struct sas_task *task, struct pm8001_ccb_info *ccb, u32 ccb_idx) 529{ 530 if (!ccb->task) 531 return; 532 if (!sas_protocol_ata(task->task_proto)) 533 if (ccb->n_elem) 534 dma_unmap_sg(pm8001_ha->dev, task->scatter, 535 task->num_scatter, task->data_dir); 536 537 switch (task->task_proto) { 538 case SAS_PROTOCOL_SMP: 539 dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_resp, 1, 540 DMA_FROM_DEVICE); 541 dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_req, 1, 542 DMA_TO_DEVICE); 543 break; 544 545 case SAS_PROTOCOL_SATA: 546 case SAS_PROTOCOL_STP: 547 case SAS_PROTOCOL_SSP: 548 default: 549 /* do nothing */ 550 break; 551 } 552 task->lldd_task = NULL; 553 ccb->task = NULL; 554 ccb->ccb_tag = 0xFFFFFFFF; 555 ccb->open_retry = 0; 556 pm8001_tag_free(pm8001_ha, ccb_idx); 557} 558 559 /** 560 * pm8001_alloc_dev - find a empty pm8001_device 561 * @pm8001_ha: our hba card information 562 */ 563static struct pm8001_device *pm8001_alloc_dev(struct pm8001_hba_info *pm8001_ha) 564{ 565 u32 dev; 566 for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) { 567 if (pm8001_ha->devices[dev].dev_type == SAS_PHY_UNUSED) { 568 pm8001_ha->devices[dev].id = dev; 569 return &pm8001_ha->devices[dev]; 570 } 571 } 572 if (dev == PM8001_MAX_DEVICES) { 573 pm8001_dbg(pm8001_ha, FAIL, 574 "max support %d devices, ignore ..\n", 575 PM8001_MAX_DEVICES); 576 } 577 return NULL; 578} 579/** 580 * pm8001_find_dev - find a matching pm8001_device 581 * @pm8001_ha: our hba card information 582 * @device_id: device ID to match against 583 */ 584struct pm8001_device *pm8001_find_dev(struct pm8001_hba_info *pm8001_ha, 585 u32 device_id) 586{ 587 u32 dev; 588 for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) { 589 if (pm8001_ha->devices[dev].device_id == device_id) 590 return &pm8001_ha->devices[dev]; 591 } 592 if (dev == PM8001_MAX_DEVICES) { 593 pm8001_dbg(pm8001_ha, FAIL, "NO MATCHING DEVICE FOUND !!!\n"); 594 } 595 return NULL; 596} 597 598static void pm8001_free_dev(struct pm8001_device *pm8001_dev) 599{ 600 u32 id = pm8001_dev->id; 601 memset(pm8001_dev, 0, sizeof(*pm8001_dev)); 602 pm8001_dev->id = id; 603 pm8001_dev->dev_type = SAS_PHY_UNUSED; 604 pm8001_dev->device_id = PM8001_MAX_DEVICES; 605 pm8001_dev->sas_device = NULL; 606} 607 608/** 609 * pm8001_dev_found_notify - libsas notify a device is found. 610 * @dev: the device structure which sas layer used. 611 * 612 * when libsas find a sas domain device, it should tell the LLDD that 613 * device is found, and then LLDD register this device to HBA firmware 614 * by the command "OPC_INB_REG_DEV", after that the HBA will assign a 615 * device ID(according to device's sas address) and returned it to LLDD. From 616 * now on, we communicate with HBA FW with the device ID which HBA assigned 617 * rather than sas address. it is the necessary step for our HBA but it is 618 * the optional for other HBA driver. 619 */ 620static int pm8001_dev_found_notify(struct domain_device *dev) 621{ 622 unsigned long flags = 0; 623 int res = 0; 624 struct pm8001_hba_info *pm8001_ha = NULL; 625 struct domain_device *parent_dev = dev->parent; 626 struct pm8001_device *pm8001_device; 627 DECLARE_COMPLETION_ONSTACK(completion); 628 u32 flag = 0; 629 pm8001_ha = pm8001_find_ha_by_dev(dev); 630 spin_lock_irqsave(&pm8001_ha->lock, flags); 631 632 pm8001_device = pm8001_alloc_dev(pm8001_ha); 633 if (!pm8001_device) { 634 res = -1; 635 goto found_out; 636 } 637 pm8001_device->sas_device = dev; 638 dev->lldd_dev = pm8001_device; 639 pm8001_device->dev_type = dev->dev_type; 640 pm8001_device->dcompletion = &completion; 641 if (parent_dev && dev_is_expander(parent_dev->dev_type)) { 642 int phy_id; 643 struct ex_phy *phy; 644 for (phy_id = 0; phy_id < parent_dev->ex_dev.num_phys; 645 phy_id++) { 646 phy = &parent_dev->ex_dev.ex_phy[phy_id]; 647 if (SAS_ADDR(phy->attached_sas_addr) 648 == SAS_ADDR(dev->sas_addr)) { 649 pm8001_device->attached_phy = phy_id; 650 break; 651 } 652 } 653 if (phy_id == parent_dev->ex_dev.num_phys) { 654 pm8001_dbg(pm8001_ha, FAIL, 655 "Error: no attached dev:%016llx at ex:%016llx.\n", 656 SAS_ADDR(dev->sas_addr), 657 SAS_ADDR(parent_dev->sas_addr)); 658 res = -1; 659 } 660 } else { 661 if (dev->dev_type == SAS_SATA_DEV) { 662 pm8001_device->attached_phy = 663 dev->rphy->identify.phy_identifier; 664 flag = 1; /* directly sata */ 665 } 666 } /*register this device to HBA*/ 667 pm8001_dbg(pm8001_ha, DISC, "Found device\n"); 668 PM8001_CHIP_DISP->reg_dev_req(pm8001_ha, pm8001_device, flag); 669 spin_unlock_irqrestore(&pm8001_ha->lock, flags); 670 wait_for_completion(&completion); 671 if (dev->dev_type == SAS_END_DEVICE) 672 msleep(50); 673 pm8001_ha->flags = PM8001F_RUN_TIME; 674 return 0; 675found_out: 676 spin_unlock_irqrestore(&pm8001_ha->lock, flags); 677 return res; 678} 679 680int pm8001_dev_found(struct domain_device *dev) 681{ 682 return pm8001_dev_found_notify(dev); 683} 684 685void pm8001_task_done(struct sas_task *task) 686{ 687 del_timer(&task->slow_task->timer); 688 complete(&task->slow_task->completion); 689} 690 691static void pm8001_tmf_timedout(struct timer_list *t) 692{ 693 struct sas_task_slow *slow = from_timer(slow, t, timer); 694 struct sas_task *task = slow->task; 695 unsigned long flags; 696 697 spin_lock_irqsave(&task->task_state_lock, flags); 698 if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) { 699 task->task_state_flags |= SAS_TASK_STATE_ABORTED; 700 complete(&task->slow_task->completion); 701 } 702 spin_unlock_irqrestore(&task->task_state_lock, flags); 703} 704 705#define PM8001_TASK_TIMEOUT 20 706/** 707 * pm8001_exec_internal_tmf_task - execute some task management commands. 708 * @dev: the wanted device. 709 * @tmf: which task management wanted to be take. 710 * @para_len: para_len. 711 * @parameter: ssp task parameter. 712 * 713 * when errors or exception happened, we may want to do something, for example 714 * abort the issued task which result in this execption, it is done by calling 715 * this function, note it is also with the task execute interface. 716 */ 717static int pm8001_exec_internal_tmf_task(struct domain_device *dev, 718 void *parameter, u32 para_len, struct pm8001_tmf_task *tmf) 719{ 720 int res, retry; 721 struct sas_task *task = NULL; 722 struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev); 723 struct pm8001_device *pm8001_dev = dev->lldd_dev; 724 DECLARE_COMPLETION_ONSTACK(completion_setstate); 725 726 for (retry = 0; retry < 3; retry++) { 727 task = sas_alloc_slow_task(GFP_KERNEL); 728 if (!task) 729 return -ENOMEM; 730 731 task->dev = dev; 732 task->task_proto = dev->tproto; 733 memcpy(&task->ssp_task, parameter, para_len); 734 task->task_done = pm8001_task_done; 735 task->slow_task->timer.function = pm8001_tmf_timedout; 736 task->slow_task->timer.expires = jiffies + PM8001_TASK_TIMEOUT*HZ; 737 add_timer(&task->slow_task->timer); 738 739 res = pm8001_task_exec(task, GFP_KERNEL, 1, tmf); 740 741 if (res) { 742 del_timer(&task->slow_task->timer); 743 pm8001_dbg(pm8001_ha, FAIL, "Executing internal task failed\n"); 744 goto ex_err; 745 } 746 wait_for_completion(&task->slow_task->completion); 747 if (pm8001_ha->chip_id != chip_8001) { 748 pm8001_dev->setds_completion = &completion_setstate; 749 PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha, 750 pm8001_dev, 0x01); 751 wait_for_completion(&completion_setstate); 752 } 753 res = -TMF_RESP_FUNC_FAILED; 754 /* Even TMF timed out, return direct. */ 755 if (task->task_state_flags & SAS_TASK_STATE_ABORTED) { 756 struct pm8001_ccb_info *ccb = task->lldd_task; 757 758 pm8001_dbg(pm8001_ha, FAIL, "TMF task[%x]timeout.\n", 759 tmf->tmf); 760 761 if (ccb) 762 ccb->task = NULL; 763 goto ex_err; 764 } 765 766 if (task->task_status.resp == SAS_TASK_COMPLETE && 767 task->task_status.stat == SAS_SAM_STAT_GOOD) { 768 res = TMF_RESP_FUNC_COMPLETE; 769 break; 770 } 771 772 if (task->task_status.resp == SAS_TASK_COMPLETE && 773 task->task_status.stat == SAS_DATA_UNDERRUN) { 774 /* no error, but return the number of bytes of 775 * underrun */ 776 res = task->task_status.residual; 777 break; 778 } 779 780 if (task->task_status.resp == SAS_TASK_COMPLETE && 781 task->task_status.stat == SAS_DATA_OVERRUN) { 782 pm8001_dbg(pm8001_ha, FAIL, "Blocked task error.\n"); 783 res = -EMSGSIZE; 784 break; 785 } else { 786 pm8001_dbg(pm8001_ha, EH, 787 " Task to dev %016llx response:0x%x status 0x%x\n", 788 SAS_ADDR(dev->sas_addr), 789 task->task_status.resp, 790 task->task_status.stat); 791 sas_free_task(task); 792 task = NULL; 793 } 794 } 795ex_err: 796 BUG_ON(retry == 3 && task != NULL); 797 sas_free_task(task); 798 return res; 799} 800 801static int 802pm8001_exec_internal_task_abort(struct pm8001_hba_info *pm8001_ha, 803 struct pm8001_device *pm8001_dev, struct domain_device *dev, u32 flag, 804 u32 task_tag) 805{ 806 int res, retry; 807 u32 ccb_tag; 808 struct pm8001_ccb_info *ccb; 809 struct sas_task *task = NULL; 810 811 for (retry = 0; retry < 3; retry++) { 812 task = sas_alloc_slow_task(GFP_KERNEL); 813 if (!task) 814 return -ENOMEM; 815 816 task->dev = dev; 817 task->task_proto = dev->tproto; 818 task->task_done = pm8001_task_done; 819 task->slow_task->timer.function = pm8001_tmf_timedout; 820 task->slow_task->timer.expires = jiffies + PM8001_TASK_TIMEOUT * HZ; 821 add_timer(&task->slow_task->timer); 822 823 res = pm8001_tag_alloc(pm8001_ha, &ccb_tag); 824 if (res) 825 goto ex_err; 826 ccb = &pm8001_ha->ccb_info[ccb_tag]; 827 ccb->device = pm8001_dev; 828 ccb->ccb_tag = ccb_tag; 829 ccb->task = task; 830 ccb->n_elem = 0; 831 832 res = PM8001_CHIP_DISP->task_abort(pm8001_ha, 833 pm8001_dev, flag, task_tag, ccb_tag); 834 if (res) { 835 del_timer(&task->slow_task->timer); 836 pm8001_dbg(pm8001_ha, FAIL, "Executing internal task failed\n"); 837 pm8001_tag_free(pm8001_ha, ccb_tag); 838 goto ex_err; 839 } 840 wait_for_completion(&task->slow_task->completion); 841 res = TMF_RESP_FUNC_FAILED; 842 /* Even TMF timed out, return direct. */ 843 if (task->task_state_flags & SAS_TASK_STATE_ABORTED) { 844 pm8001_dbg(pm8001_ha, FAIL, "TMF task timeout.\n"); 845 goto ex_err; 846 } 847 848 if (task->task_status.resp == SAS_TASK_COMPLETE && 849 task->task_status.stat == SAS_SAM_STAT_GOOD) { 850 res = TMF_RESP_FUNC_COMPLETE; 851 break; 852 853 } else { 854 pm8001_dbg(pm8001_ha, EH, 855 " Task to dev %016llx response: 0x%x status 0x%x\n", 856 SAS_ADDR(dev->sas_addr), 857 task->task_status.resp, 858 task->task_status.stat); 859 sas_free_task(task); 860 task = NULL; 861 } 862 } 863ex_err: 864 BUG_ON(retry == 3 && task != NULL); 865 sas_free_task(task); 866 return res; 867} 868 869/** 870 * pm8001_dev_gone_notify - see the comments for "pm8001_dev_found_notify" 871 * @dev: the device structure which sas layer used. 872 */ 873static void pm8001_dev_gone_notify(struct domain_device *dev) 874{ 875 unsigned long flags = 0; 876 struct pm8001_hba_info *pm8001_ha; 877 struct pm8001_device *pm8001_dev = dev->lldd_dev; 878 879 pm8001_ha = pm8001_find_ha_by_dev(dev); 880 spin_lock_irqsave(&pm8001_ha->lock, flags); 881 if (pm8001_dev) { 882 u32 device_id = pm8001_dev->device_id; 883 884 pm8001_dbg(pm8001_ha, DISC, "found dev[%d:%x] is gone.\n", 885 pm8001_dev->device_id, pm8001_dev->dev_type); 886 if (atomic_read(&pm8001_dev->running_req)) { 887 spin_unlock_irqrestore(&pm8001_ha->lock, flags); 888 pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev , 889 dev, 1, 0); 890 while (atomic_read(&pm8001_dev->running_req)) 891 msleep(20); 892 spin_lock_irqsave(&pm8001_ha->lock, flags); 893 } 894 PM8001_CHIP_DISP->dereg_dev_req(pm8001_ha, device_id); 895 pm8001_free_dev(pm8001_dev); 896 } else { 897 pm8001_dbg(pm8001_ha, DISC, "Found dev has gone.\n"); 898 } 899 dev->lldd_dev = NULL; 900 spin_unlock_irqrestore(&pm8001_ha->lock, flags); 901} 902 903void pm8001_dev_gone(struct domain_device *dev) 904{ 905 pm8001_dev_gone_notify(dev); 906} 907 908static int pm8001_issue_ssp_tmf(struct domain_device *dev, 909 u8 *lun, struct pm8001_tmf_task *tmf) 910{ 911 struct sas_ssp_task ssp_task; 912 if (!(dev->tproto & SAS_PROTOCOL_SSP)) 913 return TMF_RESP_FUNC_ESUPP; 914 915 strncpy((u8 *)&ssp_task.LUN, lun, 8); 916 return pm8001_exec_internal_tmf_task(dev, &ssp_task, sizeof(ssp_task), 917 tmf); 918} 919 920/* retry commands by ha, by task and/or by device */ 921void pm8001_open_reject_retry( 922 struct pm8001_hba_info *pm8001_ha, 923 struct sas_task *task_to_close, 924 struct pm8001_device *device_to_close) 925{ 926 int i; 927 unsigned long flags; 928 929 if (pm8001_ha == NULL) 930 return; 931 932 spin_lock_irqsave(&pm8001_ha->lock, flags); 933 934 for (i = 0; i < PM8001_MAX_CCB; i++) { 935 struct sas_task *task; 936 struct task_status_struct *ts; 937 struct pm8001_device *pm8001_dev; 938 unsigned long flags1; 939 u32 tag; 940 struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[i]; 941 942 pm8001_dev = ccb->device; 943 if (!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED)) 944 continue; 945 if (!device_to_close) { 946 uintptr_t d = (uintptr_t)pm8001_dev 947 - (uintptr_t)&pm8001_ha->devices; 948 if (((d % sizeof(*pm8001_dev)) != 0) 949 || ((d / sizeof(*pm8001_dev)) >= PM8001_MAX_DEVICES)) 950 continue; 951 } else if (pm8001_dev != device_to_close) 952 continue; 953 tag = ccb->ccb_tag; 954 if (!tag || (tag == 0xFFFFFFFF)) 955 continue; 956 task = ccb->task; 957 if (!task || !task->task_done) 958 continue; 959 if (task_to_close && (task != task_to_close)) 960 continue; 961 ts = &task->task_status; 962 ts->resp = SAS_TASK_COMPLETE; 963 /* Force the midlayer to retry */ 964 ts->stat = SAS_OPEN_REJECT; 965 ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; 966 if (pm8001_dev) 967 atomic_dec(&pm8001_dev->running_req); 968 spin_lock_irqsave(&task->task_state_lock, flags1); 969 task->task_state_flags &= ~SAS_TASK_STATE_PENDING; 970 task->task_state_flags &= ~SAS_TASK_AT_INITIATOR; 971 task->task_state_flags |= SAS_TASK_STATE_DONE; 972 if (unlikely((task->task_state_flags 973 & SAS_TASK_STATE_ABORTED))) { 974 spin_unlock_irqrestore(&task->task_state_lock, 975 flags1); 976 pm8001_ccb_task_free(pm8001_ha, task, ccb, tag); 977 } else { 978 spin_unlock_irqrestore(&task->task_state_lock, 979 flags1); 980 pm8001_ccb_task_free(pm8001_ha, task, ccb, tag); 981 mb();/* in order to force CPU ordering */ 982 spin_unlock_irqrestore(&pm8001_ha->lock, flags); 983 task->task_done(task); 984 spin_lock_irqsave(&pm8001_ha->lock, flags); 985 } 986 } 987 988 spin_unlock_irqrestore(&pm8001_ha->lock, flags); 989} 990 991/** 992 * Standard mandates link reset for ATA (type 0) and hard reset for 993 * SSP (type 1) , only for RECOVERY 994 * @dev: the device structure for the device to reset. 995 */ 996int pm8001_I_T_nexus_reset(struct domain_device *dev) 997{ 998 int rc = TMF_RESP_FUNC_FAILED; 999 struct pm8001_device *pm8001_dev; 1000 struct pm8001_hba_info *pm8001_ha; 1001 struct sas_phy *phy; 1002 1003 if (!dev || !dev->lldd_dev) 1004 return -ENODEV; 1005 1006 pm8001_dev = dev->lldd_dev; 1007 pm8001_ha = pm8001_find_ha_by_dev(dev); 1008 phy = sas_get_local_phy(dev); 1009 1010 if (dev_is_sata(dev)) { 1011 if (scsi_is_sas_phy_local(phy)) { 1012 rc = 0; 1013 goto out; 1014 } 1015 rc = sas_phy_reset(phy, 1); 1016 if (rc) { 1017 pm8001_dbg(pm8001_ha, EH, 1018 "phy reset failed for device %x\n" 1019 "with rc %d\n", pm8001_dev->device_id, rc); 1020 rc = TMF_RESP_FUNC_FAILED; 1021 goto out; 1022 } 1023 msleep(2000); 1024 rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev , 1025 dev, 1, 0); 1026 if (rc) { 1027 pm8001_dbg(pm8001_ha, EH, "task abort failed %x\n" 1028 "with rc %d\n", pm8001_dev->device_id, rc); 1029 rc = TMF_RESP_FUNC_FAILED; 1030 } 1031 } else { 1032 rc = sas_phy_reset(phy, 1); 1033 msleep(2000); 1034 } 1035 pm8001_dbg(pm8001_ha, EH, " for device[%x]:rc=%d\n", 1036 pm8001_dev->device_id, rc); 1037 out: 1038 sas_put_local_phy(phy); 1039 return rc; 1040} 1041 1042/* 1043* This function handle the IT_NEXUS_XXX event or completion 1044* status code for SSP/SATA/SMP I/O request. 1045*/ 1046int pm8001_I_T_nexus_event_handler(struct domain_device *dev) 1047{ 1048 int rc = TMF_RESP_FUNC_FAILED; 1049 struct pm8001_device *pm8001_dev; 1050 struct pm8001_hba_info *pm8001_ha; 1051 struct sas_phy *phy; 1052 1053 if (!dev || !dev->lldd_dev) 1054 return -1; 1055 1056 pm8001_dev = dev->lldd_dev; 1057 pm8001_ha = pm8001_find_ha_by_dev(dev); 1058 1059 pm8001_dbg(pm8001_ha, EH, "I_T_Nexus handler invoked !!\n"); 1060 1061 phy = sas_get_local_phy(dev); 1062 1063 if (dev_is_sata(dev)) { 1064 DECLARE_COMPLETION_ONSTACK(completion_setstate); 1065 if (scsi_is_sas_phy_local(phy)) { 1066 rc = 0; 1067 goto out; 1068 } 1069 /* send internal ssp/sata/smp abort command to FW */ 1070 rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev , 1071 dev, 1, 0); 1072 msleep(100); 1073 1074 /* deregister the target device */ 1075 pm8001_dev_gone_notify(dev); 1076 msleep(200); 1077 1078 /*send phy reset to hard reset target */ 1079 rc = sas_phy_reset(phy, 1); 1080 msleep(2000); 1081 pm8001_dev->setds_completion = &completion_setstate; 1082 1083 wait_for_completion(&completion_setstate); 1084 } else { 1085 /* send internal ssp/sata/smp abort command to FW */ 1086 rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev , 1087 dev, 1, 0); 1088 msleep(100); 1089 1090 /* deregister the target device */ 1091 pm8001_dev_gone_notify(dev); 1092 msleep(200); 1093 1094 /*send phy reset to hard reset target */ 1095 rc = sas_phy_reset(phy, 1); 1096 msleep(2000); 1097 } 1098 pm8001_dbg(pm8001_ha, EH, " for device[%x]:rc=%d\n", 1099 pm8001_dev->device_id, rc); 1100out: 1101 sas_put_local_phy(phy); 1102 1103 return rc; 1104} 1105/* mandatory SAM-3, the task reset the specified LUN*/ 1106int pm8001_lu_reset(struct domain_device *dev, u8 *lun) 1107{ 1108 int rc = TMF_RESP_FUNC_FAILED; 1109 struct pm8001_tmf_task tmf_task; 1110 struct pm8001_device *pm8001_dev = dev->lldd_dev; 1111 struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev); 1112 DECLARE_COMPLETION_ONSTACK(completion_setstate); 1113 if (dev_is_sata(dev)) { 1114 struct sas_phy *phy = sas_get_local_phy(dev); 1115 rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev , 1116 dev, 1, 0); 1117 rc = sas_phy_reset(phy, 1); 1118 sas_put_local_phy(phy); 1119 pm8001_dev->setds_completion = &completion_setstate; 1120 rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha, 1121 pm8001_dev, 0x01); 1122 wait_for_completion(&completion_setstate); 1123 } else { 1124 tmf_task.tmf = TMF_LU_RESET; 1125 rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task); 1126 } 1127 /* If failed, fall-through I_T_Nexus reset */ 1128 pm8001_dbg(pm8001_ha, EH, "for device[%x]:rc=%d\n", 1129 pm8001_dev->device_id, rc); 1130 return rc; 1131} 1132 1133/* optional SAM-3 */ 1134int pm8001_query_task(struct sas_task *task) 1135{ 1136 u32 tag = 0xdeadbeef; 1137 struct scsi_lun lun; 1138 struct pm8001_tmf_task tmf_task; 1139 int rc = TMF_RESP_FUNC_FAILED; 1140 if (unlikely(!task || !task->lldd_task || !task->dev)) 1141 return rc; 1142 1143 if (task->task_proto & SAS_PROTOCOL_SSP) { 1144 struct scsi_cmnd *cmnd = task->uldd_task; 1145 struct domain_device *dev = task->dev; 1146 struct pm8001_hba_info *pm8001_ha = 1147 pm8001_find_ha_by_dev(dev); 1148 1149 int_to_scsilun(cmnd->device->lun, &lun); 1150 rc = pm8001_find_tag(task, &tag); 1151 if (rc == 0) { 1152 rc = TMF_RESP_FUNC_FAILED; 1153 return rc; 1154 } 1155 pm8001_dbg(pm8001_ha, EH, "Query:[%16ph]\n", cmnd->cmnd); 1156 tmf_task.tmf = TMF_QUERY_TASK; 1157 tmf_task.tag_of_task_to_be_managed = tag; 1158 1159 rc = pm8001_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task); 1160 switch (rc) { 1161 /* The task is still in Lun, release it then */ 1162 case TMF_RESP_FUNC_SUCC: 1163 pm8001_dbg(pm8001_ha, EH, 1164 "The task is still in Lun\n"); 1165 break; 1166 /* The task is not in Lun or failed, reset the phy */ 1167 case TMF_RESP_FUNC_FAILED: 1168 case TMF_RESP_FUNC_COMPLETE: 1169 pm8001_dbg(pm8001_ha, EH, 1170 "The task is not in Lun or failed, reset the phy\n"); 1171 break; 1172 } 1173 } 1174 pr_err("pm80xx: rc= %d\n", rc); 1175 return rc; 1176} 1177 1178/* mandatory SAM-3, still need free task/ccb info, abort the specified task */ 1179int pm8001_abort_task(struct sas_task *task) 1180{ 1181 unsigned long flags; 1182 u32 tag; 1183 struct domain_device *dev ; 1184 struct pm8001_hba_info *pm8001_ha; 1185 struct scsi_lun lun; 1186 struct pm8001_device *pm8001_dev; 1187 struct pm8001_tmf_task tmf_task; 1188 int rc = TMF_RESP_FUNC_FAILED, ret; 1189 u32 phy_id; 1190 struct sas_task_slow slow_task; 1191 if (unlikely(!task || !task->lldd_task || !task->dev)) 1192 return TMF_RESP_FUNC_FAILED; 1193 dev = task->dev; 1194 pm8001_dev = dev->lldd_dev; 1195 pm8001_ha = pm8001_find_ha_by_dev(dev); 1196 phy_id = pm8001_dev->attached_phy; 1197 ret = pm8001_find_tag(task, &tag); 1198 if (ret == 0) { 1199 pm8001_printk("no tag for task:%p\n", task); 1200 return TMF_RESP_FUNC_FAILED; 1201 } 1202 spin_lock_irqsave(&task->task_state_lock, flags); 1203 if (task->task_state_flags & SAS_TASK_STATE_DONE) { 1204 spin_unlock_irqrestore(&task->task_state_lock, flags); 1205 return TMF_RESP_FUNC_COMPLETE; 1206 } 1207 task->task_state_flags |= SAS_TASK_STATE_ABORTED; 1208 if (task->slow_task == NULL) { 1209 init_completion(&slow_task.completion); 1210 task->slow_task = &slow_task; 1211 } 1212 spin_unlock_irqrestore(&task->task_state_lock, flags); 1213 if (task->task_proto & SAS_PROTOCOL_SSP) { 1214 struct scsi_cmnd *cmnd = task->uldd_task; 1215 int_to_scsilun(cmnd->device->lun, &lun); 1216 tmf_task.tmf = TMF_ABORT_TASK; 1217 tmf_task.tag_of_task_to_be_managed = tag; 1218 rc = pm8001_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task); 1219 pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev, 1220 pm8001_dev->sas_device, 0, tag); 1221 } else if (task->task_proto & SAS_PROTOCOL_SATA || 1222 task->task_proto & SAS_PROTOCOL_STP) { 1223 if (pm8001_ha->chip_id == chip_8006) { 1224 DECLARE_COMPLETION_ONSTACK(completion_reset); 1225 DECLARE_COMPLETION_ONSTACK(completion); 1226 struct pm8001_phy *phy = pm8001_ha->phy + phy_id; 1227 1228 /* 1. Set Device state as Recovery */ 1229 pm8001_dev->setds_completion = &completion; 1230 PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha, 1231 pm8001_dev, 0x03); 1232 wait_for_completion(&completion); 1233 1234 /* 2. Send Phy Control Hard Reset */ 1235 reinit_completion(&completion); 1236 phy->port_reset_status = PORT_RESET_TMO; 1237 phy->reset_success = false; 1238 phy->enable_completion = &completion; 1239 phy->reset_completion = &completion_reset; 1240 ret = PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id, 1241 PHY_HARD_RESET); 1242 if (ret) { 1243 phy->enable_completion = NULL; 1244 phy->reset_completion = NULL; 1245 goto out; 1246 } 1247 1248 /* In the case of the reset timeout/fail we still 1249 * abort the command at the firmware. The assumption 1250 * here is that the drive is off doing something so 1251 * that it's not processing requests, and we want to 1252 * avoid getting a completion for this and either 1253 * leaking the task in libsas or losing the race and 1254 * getting a double free. 1255 */ 1256 pm8001_dbg(pm8001_ha, MSG, 1257 "Waiting for local phy ctl\n"); 1258 ret = wait_for_completion_timeout(&completion, 1259 PM8001_TASK_TIMEOUT * HZ); 1260 if (!ret || !phy->reset_success) { 1261 phy->enable_completion = NULL; 1262 phy->reset_completion = NULL; 1263 } else { 1264 /* 3. Wait for Port Reset complete or 1265 * Port reset TMO 1266 */ 1267 pm8001_dbg(pm8001_ha, MSG, 1268 "Waiting for Port reset\n"); 1269 ret = wait_for_completion_timeout( 1270 &completion_reset, 1271 PM8001_TASK_TIMEOUT * HZ); 1272 if (!ret) 1273 phy->reset_completion = NULL; 1274 WARN_ON(phy->port_reset_status == 1275 PORT_RESET_TMO); 1276 if (phy->port_reset_status == PORT_RESET_TMO) { 1277 pm8001_dev_gone_notify(dev); 1278 goto out; 1279 } 1280 } 1281 1282 /* 1283 * 4. SATA Abort ALL 1284 * we wait for the task to be aborted so that the task 1285 * is removed from the ccb. on success the caller is 1286 * going to free the task. 1287 */ 1288 ret = pm8001_exec_internal_task_abort(pm8001_ha, 1289 pm8001_dev, pm8001_dev->sas_device, 1, tag); 1290 if (ret) 1291 goto out; 1292 ret = wait_for_completion_timeout( 1293 &task->slow_task->completion, 1294 PM8001_TASK_TIMEOUT * HZ); 1295 if (!ret) 1296 goto out; 1297 1298 /* 5. Set Device State as Operational */ 1299 reinit_completion(&completion); 1300 pm8001_dev->setds_completion = &completion; 1301 PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha, 1302 pm8001_dev, 0x01); 1303 wait_for_completion(&completion); 1304 } else { 1305 rc = pm8001_exec_internal_task_abort(pm8001_ha, 1306 pm8001_dev, pm8001_dev->sas_device, 0, tag); 1307 } 1308 rc = TMF_RESP_FUNC_COMPLETE; 1309 } else if (task->task_proto & SAS_PROTOCOL_SMP) { 1310 /* SMP */ 1311 rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev, 1312 pm8001_dev->sas_device, 0, tag); 1313 1314 } 1315out: 1316 spin_lock_irqsave(&task->task_state_lock, flags); 1317 if (task->slow_task == &slow_task) 1318 task->slow_task = NULL; 1319 spin_unlock_irqrestore(&task->task_state_lock, flags); 1320 if (rc != TMF_RESP_FUNC_COMPLETE) 1321 pm8001_printk("rc= %d\n", rc); 1322 return rc; 1323} 1324 1325int pm8001_abort_task_set(struct domain_device *dev, u8 *lun) 1326{ 1327 struct pm8001_tmf_task tmf_task; 1328 1329 tmf_task.tmf = TMF_ABORT_TASK_SET; 1330 return pm8001_issue_ssp_tmf(dev, lun, &tmf_task); 1331} 1332 1333int pm8001_clear_aca(struct domain_device *dev, u8 *lun) 1334{ 1335 struct pm8001_tmf_task tmf_task; 1336 1337 tmf_task.tmf = TMF_CLEAR_ACA; 1338 return pm8001_issue_ssp_tmf(dev, lun, &tmf_task); 1339} 1340 1341int pm8001_clear_task_set(struct domain_device *dev, u8 *lun) 1342{ 1343 struct pm8001_tmf_task tmf_task; 1344 struct pm8001_device *pm8001_dev = dev->lldd_dev; 1345 struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev); 1346 1347 pm8001_dbg(pm8001_ha, EH, "I_T_L_Q clear task set[%x]\n", 1348 pm8001_dev->device_id); 1349 tmf_task.tmf = TMF_CLEAR_TASK_SET; 1350 return pm8001_issue_ssp_tmf(dev, lun, &tmf_task); 1351} 1352 1353