1/* 2 * Disk Array driver for HP Smart Array SAS controllers 3 * Copyright (c) 2019-2020 Microchip Technology Inc. and its subsidiaries 4 * Copyright 2016 Microsemi Corporation 5 * Copyright 2014-2015 PMC-Sierra, Inc. 6 * Copyright 2000,2009-2015 Hewlett-Packard Development Company, L.P. 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License as published by 10 * the Free Software Foundation; version 2 of the License. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or 15 * NON INFRINGEMENT. See the GNU General Public License for more details. 16 * 17 * Questions/Comments/Bugfixes to esc.storagedev@microsemi.com 18 * 19 */ 20 21#include <linux/module.h> 22#include <linux/interrupt.h> 23#include <linux/types.h> 24#include <linux/pci.h> 25#include <linux/kernel.h> 26#include <linux/slab.h> 27#include <linux/delay.h> 28#include <linux/fs.h> 29#include <linux/timer.h> 30#include <linux/init.h> 31#include <linux/spinlock.h> 32#include <linux/compat.h> 33#include <linux/blktrace_api.h> 34#include <linux/uaccess.h> 35#include <linux/io.h> 36#include <linux/dma-mapping.h> 37#include <linux/completion.h> 38#include <linux/moduleparam.h> 39#include <scsi/scsi.h> 40#include <scsi/scsi_cmnd.h> 41#include <scsi/scsi_device.h> 42#include <scsi/scsi_host.h> 43#include <scsi/scsi_tcq.h> 44#include <scsi/scsi_eh.h> 45#include <scsi/scsi_transport_sas.h> 46#include <scsi/scsi_dbg.h> 47#include <linux/cciss_ioctl.h> 48#include <linux/string.h> 49#include <linux/bitmap.h> 50#include <linux/atomic.h> 51#include <linux/jiffies.h> 52#include <linux/percpu-defs.h> 53#include <linux/percpu.h> 54#include <asm/unaligned.h> 55#include <asm/div64.h> 56#include "hpsa_cmd.h" 57#include "hpsa.h" 58 59/* 60 * HPSA_DRIVER_VERSION must be 3 byte values (0-255) separated by '.' 61 * with an optional trailing '-' followed by a byte value (0-255). 62 */ 63#define HPSA_DRIVER_VERSION "3.4.20-200" 64#define DRIVER_NAME "HP HPSA Driver (v " HPSA_DRIVER_VERSION ")" 65#define HPSA "hpsa" 66 67/* How long to wait for CISS doorbell communication */ 68#define CLEAR_EVENT_WAIT_INTERVAL 20 /* ms for each msleep() call */ 69#define MODE_CHANGE_WAIT_INTERVAL 10 /* ms for each msleep() call */ 70#define MAX_CLEAR_EVENT_WAIT 30000 /* times 20 ms = 600 s */ 71#define MAX_MODE_CHANGE_WAIT 2000 /* times 10 ms = 20 s */ 72#define MAX_IOCTL_CONFIG_WAIT 1000 73 74/*define how many times we will try a command because of bus resets */ 75#define MAX_CMD_RETRIES 3 76/* How long to wait before giving up on a command */ 77#define HPSA_EH_PTRAID_TIMEOUT (240 * HZ) 78 79/* Embedded module documentation macros - see modules.h */ 80MODULE_AUTHOR("Hewlett-Packard Company"); 81MODULE_DESCRIPTION("Driver for HP Smart Array Controller version " \ 82 HPSA_DRIVER_VERSION); 83MODULE_SUPPORTED_DEVICE("HP Smart Array Controllers"); 84MODULE_VERSION(HPSA_DRIVER_VERSION); 85MODULE_LICENSE("GPL"); 86MODULE_ALIAS("cciss"); 87 88static int hpsa_simple_mode; 89module_param(hpsa_simple_mode, int, S_IRUGO|S_IWUSR); 90MODULE_PARM_DESC(hpsa_simple_mode, 91 "Use 'simple mode' rather than 'performant mode'"); 92 93/* define the PCI info for the cards we can control */ 94static const struct pci_device_id hpsa_pci_device_id[] = { 95 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3241}, 96 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3243}, 97 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3245}, 98 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3247}, 99 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249}, 100 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324A}, 101 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324B}, 102 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3233}, 103 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x3350}, 104 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x3351}, 105 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x3352}, 106 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x3353}, 107 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x3354}, 108 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x3355}, 109 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x3356}, 110 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103c, 0x1920}, 111 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1921}, 112 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1922}, 113 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1923}, 114 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1924}, 115 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103c, 0x1925}, 116 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1926}, 117 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1928}, 118 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1929}, 119 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21BD}, 120 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21BE}, 121 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21BF}, 122 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21C0}, 123 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21C1}, 124 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21C2}, 125 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21C3}, 126 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21C4}, 127 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21C5}, 128 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21C6}, 129 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21C7}, 130 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21C8}, 131 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21C9}, 132 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21CA}, 133 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21CB}, 134 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21CC}, 135 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21CD}, 136 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21CE}, 137 {PCI_VENDOR_ID_ADAPTEC2, 0x0290, 0x9005, 0x0580}, 138 {PCI_VENDOR_ID_ADAPTEC2, 0x0290, 0x9005, 0x0581}, 139 {PCI_VENDOR_ID_ADAPTEC2, 0x0290, 0x9005, 0x0582}, 140 {PCI_VENDOR_ID_ADAPTEC2, 0x0290, 0x9005, 0x0583}, 141 {PCI_VENDOR_ID_ADAPTEC2, 0x0290, 0x9005, 0x0584}, 142 {PCI_VENDOR_ID_ADAPTEC2, 0x0290, 0x9005, 0x0585}, 143 {PCI_VENDOR_ID_HP_3PAR, 0x0075, 0x1590, 0x0076}, 144 {PCI_VENDOR_ID_HP_3PAR, 0x0075, 0x1590, 0x0087}, 145 {PCI_VENDOR_ID_HP_3PAR, 0x0075, 0x1590, 0x007D}, 146 {PCI_VENDOR_ID_HP_3PAR, 0x0075, 0x1590, 0x0088}, 147 {PCI_VENDOR_ID_HP, 0x333f, 0x103c, 0x333f}, 148 {PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 149 PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0}, 150 {PCI_VENDOR_ID_COMPAQ, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 151 PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0}, 152 {0,} 153}; 154 155MODULE_DEVICE_TABLE(pci, hpsa_pci_device_id); 156 157/* board_id = Subsystem Device ID & Vendor ID 158 * product = Marketing Name for the board 159 * access = Address of the struct of function pointers 160 */ 161static struct board_type products[] = { 162 {0x40700E11, "Smart Array 5300", &SA5A_access}, 163 {0x40800E11, "Smart Array 5i", &SA5B_access}, 164 {0x40820E11, "Smart Array 532", &SA5B_access}, 165 {0x40830E11, "Smart Array 5312", &SA5B_access}, 166 {0x409A0E11, "Smart Array 641", &SA5A_access}, 167 {0x409B0E11, "Smart Array 642", &SA5A_access}, 168 {0x409C0E11, "Smart Array 6400", &SA5A_access}, 169 {0x409D0E11, "Smart Array 6400 EM", &SA5A_access}, 170 {0x40910E11, "Smart Array 6i", &SA5A_access}, 171 {0x3225103C, "Smart Array P600", &SA5A_access}, 172 {0x3223103C, "Smart Array P800", &SA5A_access}, 173 {0x3234103C, "Smart Array P400", &SA5A_access}, 174 {0x3235103C, "Smart Array P400i", &SA5A_access}, 175 {0x3211103C, "Smart Array E200i", &SA5A_access}, 176 {0x3212103C, "Smart Array E200", &SA5A_access}, 177 {0x3213103C, "Smart Array E200i", &SA5A_access}, 178 {0x3214103C, "Smart Array E200i", &SA5A_access}, 179 {0x3215103C, "Smart Array E200i", &SA5A_access}, 180 {0x3237103C, "Smart Array E500", &SA5A_access}, 181 {0x323D103C, "Smart Array P700m", &SA5A_access}, 182 {0x3241103C, "Smart Array P212", &SA5_access}, 183 {0x3243103C, "Smart Array P410", &SA5_access}, 184 {0x3245103C, "Smart Array P410i", &SA5_access}, 185 {0x3247103C, "Smart Array P411", &SA5_access}, 186 {0x3249103C, "Smart Array P812", &SA5_access}, 187 {0x324A103C, "Smart Array P712m", &SA5_access}, 188 {0x324B103C, "Smart Array P711m", &SA5_access}, 189 {0x3233103C, "HP StorageWorks 1210m", &SA5_access}, /* alias of 333f */ 190 {0x3350103C, "Smart Array P222", &SA5_access}, 191 {0x3351103C, "Smart Array P420", &SA5_access}, 192 {0x3352103C, "Smart Array P421", &SA5_access}, 193 {0x3353103C, "Smart Array P822", &SA5_access}, 194 {0x3354103C, "Smart Array P420i", &SA5_access}, 195 {0x3355103C, "Smart Array P220i", &SA5_access}, 196 {0x3356103C, "Smart Array P721m", &SA5_access}, 197 {0x1920103C, "Smart Array P430i", &SA5_access}, 198 {0x1921103C, "Smart Array P830i", &SA5_access}, 199 {0x1922103C, "Smart Array P430", &SA5_access}, 200 {0x1923103C, "Smart Array P431", &SA5_access}, 201 {0x1924103C, "Smart Array P830", &SA5_access}, 202 {0x1925103C, "Smart Array P831", &SA5_access}, 203 {0x1926103C, "Smart Array P731m", &SA5_access}, 204 {0x1928103C, "Smart Array P230i", &SA5_access}, 205 {0x1929103C, "Smart Array P530", &SA5_access}, 206 {0x21BD103C, "Smart Array P244br", &SA5_access}, 207 {0x21BE103C, "Smart Array P741m", &SA5_access}, 208 {0x21BF103C, "Smart HBA H240ar", &SA5_access}, 209 {0x21C0103C, "Smart Array P440ar", &SA5_access}, 210 {0x21C1103C, "Smart Array P840ar", &SA5_access}, 211 {0x21C2103C, "Smart Array P440", &SA5_access}, 212 {0x21C3103C, "Smart Array P441", &SA5_access}, 213 {0x21C4103C, "Smart Array", &SA5_access}, 214 {0x21C5103C, "Smart Array P841", &SA5_access}, 215 {0x21C6103C, "Smart HBA H244br", &SA5_access}, 216 {0x21C7103C, "Smart HBA H240", &SA5_access}, 217 {0x21C8103C, "Smart HBA H241", &SA5_access}, 218 {0x21C9103C, "Smart Array", &SA5_access}, 219 {0x21CA103C, "Smart Array P246br", &SA5_access}, 220 {0x21CB103C, "Smart Array P840", &SA5_access}, 221 {0x21CC103C, "Smart Array", &SA5_access}, 222 {0x21CD103C, "Smart Array", &SA5_access}, 223 {0x21CE103C, "Smart HBA", &SA5_access}, 224 {0x05809005, "SmartHBA-SA", &SA5_access}, 225 {0x05819005, "SmartHBA-SA 8i", &SA5_access}, 226 {0x05829005, "SmartHBA-SA 8i8e", &SA5_access}, 227 {0x05839005, "SmartHBA-SA 8e", &SA5_access}, 228 {0x05849005, "SmartHBA-SA 16i", &SA5_access}, 229 {0x05859005, "SmartHBA-SA 4i4e", &SA5_access}, 230 {0x00761590, "HP Storage P1224 Array Controller", &SA5_access}, 231 {0x00871590, "HP Storage P1224e Array Controller", &SA5_access}, 232 {0x007D1590, "HP Storage P1228 Array Controller", &SA5_access}, 233 {0x00881590, "HP Storage P1228e Array Controller", &SA5_access}, 234 {0x333f103c, "HP StorageWorks 1210m Array Controller", &SA5_access}, 235 {0xFFFF103C, "Unknown Smart Array", &SA5_access}, 236}; 237 238static struct scsi_transport_template *hpsa_sas_transport_template; 239static int hpsa_add_sas_host(struct ctlr_info *h); 240static void hpsa_delete_sas_host(struct ctlr_info *h); 241static int hpsa_add_sas_device(struct hpsa_sas_node *hpsa_sas_node, 242 struct hpsa_scsi_dev_t *device); 243static void hpsa_remove_sas_device(struct hpsa_scsi_dev_t *device); 244static struct hpsa_scsi_dev_t 245 *hpsa_find_device_by_sas_rphy(struct ctlr_info *h, 246 struct sas_rphy *rphy); 247 248#define SCSI_CMD_BUSY ((struct scsi_cmnd *)&hpsa_cmd_busy) 249static const struct scsi_cmnd hpsa_cmd_busy; 250#define SCSI_CMD_IDLE ((struct scsi_cmnd *)&hpsa_cmd_idle) 251static const struct scsi_cmnd hpsa_cmd_idle; 252static int number_of_controllers; 253 254static irqreturn_t do_hpsa_intr_intx(int irq, void *dev_id); 255static irqreturn_t do_hpsa_intr_msi(int irq, void *dev_id); 256static int hpsa_ioctl(struct scsi_device *dev, unsigned int cmd, 257 void __user *arg); 258static int hpsa_passthru_ioctl(struct ctlr_info *h, 259 IOCTL_Command_struct *iocommand); 260static int hpsa_big_passthru_ioctl(struct ctlr_info *h, 261 BIG_IOCTL_Command_struct *ioc); 262 263#ifdef CONFIG_COMPAT 264static int hpsa_compat_ioctl(struct scsi_device *dev, unsigned int cmd, 265 void __user *arg); 266#endif 267 268static void cmd_free(struct ctlr_info *h, struct CommandList *c); 269static struct CommandList *cmd_alloc(struct ctlr_info *h); 270static void cmd_tagged_free(struct ctlr_info *h, struct CommandList *c); 271static struct CommandList *cmd_tagged_alloc(struct ctlr_info *h, 272 struct scsi_cmnd *scmd); 273static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h, 274 void *buff, size_t size, u16 page_code, unsigned char *scsi3addr, 275 int cmd_type); 276static void hpsa_free_cmd_pool(struct ctlr_info *h); 277#define VPD_PAGE (1 << 8) 278#define HPSA_SIMPLE_ERROR_BITS 0x03 279 280static int hpsa_scsi_queue_command(struct Scsi_Host *h, struct scsi_cmnd *cmd); 281static void hpsa_scan_start(struct Scsi_Host *); 282static int hpsa_scan_finished(struct Scsi_Host *sh, 283 unsigned long elapsed_time); 284static int hpsa_change_queue_depth(struct scsi_device *sdev, int qdepth); 285 286static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd); 287static int hpsa_slave_alloc(struct scsi_device *sdev); 288static int hpsa_slave_configure(struct scsi_device *sdev); 289static void hpsa_slave_destroy(struct scsi_device *sdev); 290 291static void hpsa_update_scsi_devices(struct ctlr_info *h); 292static int check_for_unit_attention(struct ctlr_info *h, 293 struct CommandList *c); 294static void check_ioctl_unit_attention(struct ctlr_info *h, 295 struct CommandList *c); 296/* performant mode helper functions */ 297static void calc_bucket_map(int *bucket, int num_buckets, 298 int nsgs, int min_blocks, u32 *bucket_map); 299static void hpsa_free_performant_mode(struct ctlr_info *h); 300static int hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h); 301static inline u32 next_command(struct ctlr_info *h, u8 q); 302static int hpsa_find_cfg_addrs(struct pci_dev *pdev, void __iomem *vaddr, 303 u32 *cfg_base_addr, u64 *cfg_base_addr_index, 304 u64 *cfg_offset); 305static int hpsa_pci_find_memory_BAR(struct pci_dev *pdev, 306 unsigned long *memory_bar); 307static int hpsa_lookup_board_id(struct pci_dev *pdev, u32 *board_id, 308 bool *legacy_board); 309static int wait_for_device_to_become_ready(struct ctlr_info *h, 310 unsigned char lunaddr[], 311 int reply_queue); 312static int hpsa_wait_for_board_state(struct pci_dev *pdev, void __iomem *vaddr, 313 int wait_for_ready); 314static inline void finish_cmd(struct CommandList *c); 315static int hpsa_wait_for_mode_change_ack(struct ctlr_info *h); 316#define BOARD_NOT_READY 0 317#define BOARD_READY 1 318static void hpsa_drain_accel_commands(struct ctlr_info *h); 319static void hpsa_flush_cache(struct ctlr_info *h); 320static int hpsa_scsi_ioaccel_queue_command(struct ctlr_info *h, 321 struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len, 322 u8 *scsi3addr, struct hpsa_scsi_dev_t *phys_disk); 323static void hpsa_command_resubmit_worker(struct work_struct *work); 324static u32 lockup_detected(struct ctlr_info *h); 325static int detect_controller_lockup(struct ctlr_info *h); 326static void hpsa_disable_rld_caching(struct ctlr_info *h); 327static inline int hpsa_scsi_do_report_phys_luns(struct ctlr_info *h, 328 struct ReportExtendedLUNdata *buf, int bufsize); 329static bool hpsa_vpd_page_supported(struct ctlr_info *h, 330 unsigned char scsi3addr[], u8 page); 331static int hpsa_luns_changed(struct ctlr_info *h); 332static bool hpsa_cmd_dev_match(struct ctlr_info *h, struct CommandList *c, 333 struct hpsa_scsi_dev_t *dev, 334 unsigned char *scsi3addr); 335 336static inline struct ctlr_info *sdev_to_hba(struct scsi_device *sdev) 337{ 338 unsigned long *priv = shost_priv(sdev->host); 339 return (struct ctlr_info *) *priv; 340} 341 342static inline struct ctlr_info *shost_to_hba(struct Scsi_Host *sh) 343{ 344 unsigned long *priv = shost_priv(sh); 345 return (struct ctlr_info *) *priv; 346} 347 348static inline bool hpsa_is_cmd_idle(struct CommandList *c) 349{ 350 return c->scsi_cmd == SCSI_CMD_IDLE; 351} 352 353/* extract sense key, asc, and ascq from sense data. -1 means invalid. */ 354static void decode_sense_data(const u8 *sense_data, int sense_data_len, 355 u8 *sense_key, u8 *asc, u8 *ascq) 356{ 357 struct scsi_sense_hdr sshdr; 358 bool rc; 359 360 *sense_key = -1; 361 *asc = -1; 362 *ascq = -1; 363 364 if (sense_data_len < 1) 365 return; 366 367 rc = scsi_normalize_sense(sense_data, sense_data_len, &sshdr); 368 if (rc) { 369 *sense_key = sshdr.sense_key; 370 *asc = sshdr.asc; 371 *ascq = sshdr.ascq; 372 } 373} 374 375static int check_for_unit_attention(struct ctlr_info *h, 376 struct CommandList *c) 377{ 378 u8 sense_key, asc, ascq; 379 int sense_len; 380 381 if (c->err_info->SenseLen > sizeof(c->err_info->SenseInfo)) 382 sense_len = sizeof(c->err_info->SenseInfo); 383 else 384 sense_len = c->err_info->SenseLen; 385 386 decode_sense_data(c->err_info->SenseInfo, sense_len, 387 &sense_key, &asc, &ascq); 388 if (sense_key != UNIT_ATTENTION || asc == 0xff) 389 return 0; 390 391 switch (asc) { 392 case STATE_CHANGED: 393 dev_warn(&h->pdev->dev, 394 "%s: a state change detected, command retried\n", 395 h->devname); 396 break; 397 case LUN_FAILED: 398 dev_warn(&h->pdev->dev, 399 "%s: LUN failure detected\n", h->devname); 400 break; 401 case REPORT_LUNS_CHANGED: 402 dev_warn(&h->pdev->dev, 403 "%s: report LUN data changed\n", h->devname); 404 /* 405 * Note: this REPORT_LUNS_CHANGED condition only occurs on the external 406 * target (array) devices. 407 */ 408 break; 409 case POWER_OR_RESET: 410 dev_warn(&h->pdev->dev, 411 "%s: a power on or device reset detected\n", 412 h->devname); 413 break; 414 case UNIT_ATTENTION_CLEARED: 415 dev_warn(&h->pdev->dev, 416 "%s: unit attention cleared by another initiator\n", 417 h->devname); 418 break; 419 default: 420 dev_warn(&h->pdev->dev, 421 "%s: unknown unit attention detected\n", 422 h->devname); 423 break; 424 } 425 return 1; 426} 427 428static int check_for_busy(struct ctlr_info *h, struct CommandList *c) 429{ 430 if (c->err_info->CommandStatus != CMD_TARGET_STATUS || 431 (c->err_info->ScsiStatus != SAM_STAT_BUSY && 432 c->err_info->ScsiStatus != SAM_STAT_TASK_SET_FULL)) 433 return 0; 434 dev_warn(&h->pdev->dev, HPSA "device busy"); 435 return 1; 436} 437 438static u32 lockup_detected(struct ctlr_info *h); 439static ssize_t host_show_lockup_detected(struct device *dev, 440 struct device_attribute *attr, char *buf) 441{ 442 int ld; 443 struct ctlr_info *h; 444 struct Scsi_Host *shost = class_to_shost(dev); 445 446 h = shost_to_hba(shost); 447 ld = lockup_detected(h); 448 449 return sprintf(buf, "ld=%d\n", ld); 450} 451 452static ssize_t host_store_hp_ssd_smart_path_status(struct device *dev, 453 struct device_attribute *attr, 454 const char *buf, size_t count) 455{ 456 int status, len; 457 struct ctlr_info *h; 458 struct Scsi_Host *shost = class_to_shost(dev); 459 char tmpbuf[10]; 460 461 if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) 462 return -EACCES; 463 len = count > sizeof(tmpbuf) - 1 ? sizeof(tmpbuf) - 1 : count; 464 strncpy(tmpbuf, buf, len); 465 tmpbuf[len] = '\0'; 466 if (sscanf(tmpbuf, "%d", &status) != 1) 467 return -EINVAL; 468 h = shost_to_hba(shost); 469 h->acciopath_status = !!status; 470 dev_warn(&h->pdev->dev, 471 "hpsa: HP SSD Smart Path %s via sysfs update.\n", 472 h->acciopath_status ? "enabled" : "disabled"); 473 return count; 474} 475 476static ssize_t host_store_raid_offload_debug(struct device *dev, 477 struct device_attribute *attr, 478 const char *buf, size_t count) 479{ 480 int debug_level, len; 481 struct ctlr_info *h; 482 struct Scsi_Host *shost = class_to_shost(dev); 483 char tmpbuf[10]; 484 485 if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) 486 return -EACCES; 487 len = count > sizeof(tmpbuf) - 1 ? sizeof(tmpbuf) - 1 : count; 488 strncpy(tmpbuf, buf, len); 489 tmpbuf[len] = '\0'; 490 if (sscanf(tmpbuf, "%d", &debug_level) != 1) 491 return -EINVAL; 492 if (debug_level < 0) 493 debug_level = 0; 494 h = shost_to_hba(shost); 495 h->raid_offload_debug = debug_level; 496 dev_warn(&h->pdev->dev, "hpsa: Set raid_offload_debug level = %d\n", 497 h->raid_offload_debug); 498 return count; 499} 500 501static ssize_t host_store_rescan(struct device *dev, 502 struct device_attribute *attr, 503 const char *buf, size_t count) 504{ 505 struct ctlr_info *h; 506 struct Scsi_Host *shost = class_to_shost(dev); 507 h = shost_to_hba(shost); 508 hpsa_scan_start(h->scsi_host); 509 return count; 510} 511 512static void hpsa_turn_off_ioaccel_for_device(struct hpsa_scsi_dev_t *device) 513{ 514 device->offload_enabled = 0; 515 device->offload_to_be_enabled = 0; 516} 517 518static ssize_t host_show_firmware_revision(struct device *dev, 519 struct device_attribute *attr, char *buf) 520{ 521 struct ctlr_info *h; 522 struct Scsi_Host *shost = class_to_shost(dev); 523 unsigned char *fwrev; 524 525 h = shost_to_hba(shost); 526 if (!h->hba_inquiry_data) 527 return 0; 528 fwrev = &h->hba_inquiry_data[32]; 529 return snprintf(buf, 20, "%c%c%c%c\n", 530 fwrev[0], fwrev[1], fwrev[2], fwrev[3]); 531} 532 533static ssize_t host_show_commands_outstanding(struct device *dev, 534 struct device_attribute *attr, char *buf) 535{ 536 struct Scsi_Host *shost = class_to_shost(dev); 537 struct ctlr_info *h = shost_to_hba(shost); 538 539 return snprintf(buf, 20, "%d\n", 540 atomic_read(&h->commands_outstanding)); 541} 542 543static ssize_t host_show_transport_mode(struct device *dev, 544 struct device_attribute *attr, char *buf) 545{ 546 struct ctlr_info *h; 547 struct Scsi_Host *shost = class_to_shost(dev); 548 549 h = shost_to_hba(shost); 550 return snprintf(buf, 20, "%s\n", 551 h->transMethod & CFGTBL_Trans_Performant ? 552 "performant" : "simple"); 553} 554 555static ssize_t host_show_hp_ssd_smart_path_status(struct device *dev, 556 struct device_attribute *attr, char *buf) 557{ 558 struct ctlr_info *h; 559 struct Scsi_Host *shost = class_to_shost(dev); 560 561 h = shost_to_hba(shost); 562 return snprintf(buf, 30, "HP SSD Smart Path %s\n", 563 (h->acciopath_status == 1) ? "enabled" : "disabled"); 564} 565 566/* List of controllers which cannot be hard reset on kexec with reset_devices */ 567static u32 unresettable_controller[] = { 568 0x324a103C, /* Smart Array P712m */ 569 0x324b103C, /* Smart Array P711m */ 570 0x3223103C, /* Smart Array P800 */ 571 0x3234103C, /* Smart Array P400 */ 572 0x3235103C, /* Smart Array P400i */ 573 0x3211103C, /* Smart Array E200i */ 574 0x3212103C, /* Smart Array E200 */ 575 0x3213103C, /* Smart Array E200i */ 576 0x3214103C, /* Smart Array E200i */ 577 0x3215103C, /* Smart Array E200i */ 578 0x3237103C, /* Smart Array E500 */ 579 0x323D103C, /* Smart Array P700m */ 580 0x40800E11, /* Smart Array 5i */ 581 0x409C0E11, /* Smart Array 6400 */ 582 0x409D0E11, /* Smart Array 6400 EM */ 583 0x40700E11, /* Smart Array 5300 */ 584 0x40820E11, /* Smart Array 532 */ 585 0x40830E11, /* Smart Array 5312 */ 586 0x409A0E11, /* Smart Array 641 */ 587 0x409B0E11, /* Smart Array 642 */ 588 0x40910E11, /* Smart Array 6i */ 589}; 590 591/* List of controllers which cannot even be soft reset */ 592static u32 soft_unresettable_controller[] = { 593 0x40800E11, /* Smart Array 5i */ 594 0x40700E11, /* Smart Array 5300 */ 595 0x40820E11, /* Smart Array 532 */ 596 0x40830E11, /* Smart Array 5312 */ 597 0x409A0E11, /* Smart Array 641 */ 598 0x409B0E11, /* Smart Array 642 */ 599 0x40910E11, /* Smart Array 6i */ 600 /* Exclude 640x boards. These are two pci devices in one slot 601 * which share a battery backed cache module. One controls the 602 * cache, the other accesses the cache through the one that controls 603 * it. If we reset the one controlling the cache, the other will 604 * likely not be happy. Just forbid resetting this conjoined mess. 605 * The 640x isn't really supported by hpsa anyway. 606 */ 607 0x409C0E11, /* Smart Array 6400 */ 608 0x409D0E11, /* Smart Array 6400 EM */ 609}; 610 611static int board_id_in_array(u32 a[], int nelems, u32 board_id) 612{ 613 int i; 614 615 for (i = 0; i < nelems; i++) 616 if (a[i] == board_id) 617 return 1; 618 return 0; 619} 620 621static int ctlr_is_hard_resettable(u32 board_id) 622{ 623 return !board_id_in_array(unresettable_controller, 624 ARRAY_SIZE(unresettable_controller), board_id); 625} 626 627static int ctlr_is_soft_resettable(u32 board_id) 628{ 629 return !board_id_in_array(soft_unresettable_controller, 630 ARRAY_SIZE(soft_unresettable_controller), board_id); 631} 632 633static int ctlr_is_resettable(u32 board_id) 634{ 635 return ctlr_is_hard_resettable(board_id) || 636 ctlr_is_soft_resettable(board_id); 637} 638 639static ssize_t host_show_resettable(struct device *dev, 640 struct device_attribute *attr, char *buf) 641{ 642 struct ctlr_info *h; 643 struct Scsi_Host *shost = class_to_shost(dev); 644 645 h = shost_to_hba(shost); 646 return snprintf(buf, 20, "%d\n", ctlr_is_resettable(h->board_id)); 647} 648 649static inline int is_logical_dev_addr_mode(unsigned char scsi3addr[]) 650{ 651 return (scsi3addr[3] & 0xC0) == 0x40; 652} 653 654static const char * const raid_label[] = { "0", "4", "1(+0)", "5", "5+1", "6", 655 "1(+0)ADM", "UNKNOWN", "PHYS DRV" 656}; 657#define HPSA_RAID_0 0 658#define HPSA_RAID_4 1 659#define HPSA_RAID_1 2 /* also used for RAID 10 */ 660#define HPSA_RAID_5 3 /* also used for RAID 50 */ 661#define HPSA_RAID_51 4 662#define HPSA_RAID_6 5 /* also used for RAID 60 */ 663#define HPSA_RAID_ADM 6 /* also used for RAID 1+0 ADM */ 664#define RAID_UNKNOWN (ARRAY_SIZE(raid_label) - 2) 665#define PHYSICAL_DRIVE (ARRAY_SIZE(raid_label) - 1) 666 667static inline bool is_logical_device(struct hpsa_scsi_dev_t *device) 668{ 669 return !device->physical_device; 670} 671 672static ssize_t raid_level_show(struct device *dev, 673 struct device_attribute *attr, char *buf) 674{ 675 ssize_t l = 0; 676 unsigned char rlevel; 677 struct ctlr_info *h; 678 struct scsi_device *sdev; 679 struct hpsa_scsi_dev_t *hdev; 680 unsigned long flags; 681 682 sdev = to_scsi_device(dev); 683 h = sdev_to_hba(sdev); 684 spin_lock_irqsave(&h->lock, flags); 685 hdev = sdev->hostdata; 686 if (!hdev) { 687 spin_unlock_irqrestore(&h->lock, flags); 688 return -ENODEV; 689 } 690 691 /* Is this even a logical drive? */ 692 if (!is_logical_device(hdev)) { 693 spin_unlock_irqrestore(&h->lock, flags); 694 l = snprintf(buf, PAGE_SIZE, "N/A\n"); 695 return l; 696 } 697 698 rlevel = hdev->raid_level; 699 spin_unlock_irqrestore(&h->lock, flags); 700 if (rlevel > RAID_UNKNOWN) 701 rlevel = RAID_UNKNOWN; 702 l = snprintf(buf, PAGE_SIZE, "RAID %s\n", raid_label[rlevel]); 703 return l; 704} 705 706static ssize_t lunid_show(struct device *dev, 707 struct device_attribute *attr, char *buf) 708{ 709 struct ctlr_info *h; 710 struct scsi_device *sdev; 711 struct hpsa_scsi_dev_t *hdev; 712 unsigned long flags; 713 unsigned char lunid[8]; 714 715 sdev = to_scsi_device(dev); 716 h = sdev_to_hba(sdev); 717 spin_lock_irqsave(&h->lock, flags); 718 hdev = sdev->hostdata; 719 if (!hdev) { 720 spin_unlock_irqrestore(&h->lock, flags); 721 return -ENODEV; 722 } 723 memcpy(lunid, hdev->scsi3addr, sizeof(lunid)); 724 spin_unlock_irqrestore(&h->lock, flags); 725 return snprintf(buf, 20, "0x%8phN\n", lunid); 726} 727 728static ssize_t unique_id_show(struct device *dev, 729 struct device_attribute *attr, char *buf) 730{ 731 struct ctlr_info *h; 732 struct scsi_device *sdev; 733 struct hpsa_scsi_dev_t *hdev; 734 unsigned long flags; 735 unsigned char sn[16]; 736 737 sdev = to_scsi_device(dev); 738 h = sdev_to_hba(sdev); 739 spin_lock_irqsave(&h->lock, flags); 740 hdev = sdev->hostdata; 741 if (!hdev) { 742 spin_unlock_irqrestore(&h->lock, flags); 743 return -ENODEV; 744 } 745 memcpy(sn, hdev->device_id, sizeof(sn)); 746 spin_unlock_irqrestore(&h->lock, flags); 747 return snprintf(buf, 16 * 2 + 2, 748 "%02X%02X%02X%02X%02X%02X%02X%02X" 749 "%02X%02X%02X%02X%02X%02X%02X%02X\n", 750 sn[0], sn[1], sn[2], sn[3], 751 sn[4], sn[5], sn[6], sn[7], 752 sn[8], sn[9], sn[10], sn[11], 753 sn[12], sn[13], sn[14], sn[15]); 754} 755 756static ssize_t sas_address_show(struct device *dev, 757 struct device_attribute *attr, char *buf) 758{ 759 struct ctlr_info *h; 760 struct scsi_device *sdev; 761 struct hpsa_scsi_dev_t *hdev; 762 unsigned long flags; 763 u64 sas_address; 764 765 sdev = to_scsi_device(dev); 766 h = sdev_to_hba(sdev); 767 spin_lock_irqsave(&h->lock, flags); 768 hdev = sdev->hostdata; 769 if (!hdev || is_logical_device(hdev) || !hdev->expose_device) { 770 spin_unlock_irqrestore(&h->lock, flags); 771 return -ENODEV; 772 } 773 sas_address = hdev->sas_address; 774 spin_unlock_irqrestore(&h->lock, flags); 775 776 return snprintf(buf, PAGE_SIZE, "0x%016llx\n", sas_address); 777} 778 779static ssize_t host_show_hp_ssd_smart_path_enabled(struct device *dev, 780 struct device_attribute *attr, char *buf) 781{ 782 struct ctlr_info *h; 783 struct scsi_device *sdev; 784 struct hpsa_scsi_dev_t *hdev; 785 unsigned long flags; 786 int offload_enabled; 787 788 sdev = to_scsi_device(dev); 789 h = sdev_to_hba(sdev); 790 spin_lock_irqsave(&h->lock, flags); 791 hdev = sdev->hostdata; 792 if (!hdev) { 793 spin_unlock_irqrestore(&h->lock, flags); 794 return -ENODEV; 795 } 796 offload_enabled = hdev->offload_enabled; 797 spin_unlock_irqrestore(&h->lock, flags); 798 799 if (hdev->devtype == TYPE_DISK || hdev->devtype == TYPE_ZBC) 800 return snprintf(buf, 20, "%d\n", offload_enabled); 801 else 802 return snprintf(buf, 40, "%s\n", 803 "Not applicable for a controller"); 804} 805 806#define MAX_PATHS 8 807static ssize_t path_info_show(struct device *dev, 808 struct device_attribute *attr, char *buf) 809{ 810 struct ctlr_info *h; 811 struct scsi_device *sdev; 812 struct hpsa_scsi_dev_t *hdev; 813 unsigned long flags; 814 int i; 815 int output_len = 0; 816 u8 box; 817 u8 bay; 818 u8 path_map_index = 0; 819 char *active; 820 unsigned char phys_connector[2]; 821 822 sdev = to_scsi_device(dev); 823 h = sdev_to_hba(sdev); 824 spin_lock_irqsave(&h->devlock, flags); 825 hdev = sdev->hostdata; 826 if (!hdev) { 827 spin_unlock_irqrestore(&h->devlock, flags); 828 return -ENODEV; 829 } 830 831 bay = hdev->bay; 832 for (i = 0; i < MAX_PATHS; i++) { 833 path_map_index = 1<<i; 834 if (i == hdev->active_path_index) 835 active = "Active"; 836 else if (hdev->path_map & path_map_index) 837 active = "Inactive"; 838 else 839 continue; 840 841 output_len += scnprintf(buf + output_len, 842 PAGE_SIZE - output_len, 843 "[%d:%d:%d:%d] %20.20s ", 844 h->scsi_host->host_no, 845 hdev->bus, hdev->target, hdev->lun, 846 scsi_device_type(hdev->devtype)); 847 848 if (hdev->devtype == TYPE_RAID || is_logical_device(hdev)) { 849 output_len += scnprintf(buf + output_len, 850 PAGE_SIZE - output_len, 851 "%s\n", active); 852 continue; 853 } 854 855 box = hdev->box[i]; 856 memcpy(&phys_connector, &hdev->phys_connector[i], 857 sizeof(phys_connector)); 858 if (phys_connector[0] < '0') 859 phys_connector[0] = '0'; 860 if (phys_connector[1] < '0') 861 phys_connector[1] = '0'; 862 output_len += scnprintf(buf + output_len, 863 PAGE_SIZE - output_len, 864 "PORT: %.2s ", 865 phys_connector); 866 if ((hdev->devtype == TYPE_DISK || hdev->devtype == TYPE_ZBC) && 867 hdev->expose_device) { 868 if (box == 0 || box == 0xFF) { 869 output_len += scnprintf(buf + output_len, 870 PAGE_SIZE - output_len, 871 "BAY: %hhu %s\n", 872 bay, active); 873 } else { 874 output_len += scnprintf(buf + output_len, 875 PAGE_SIZE - output_len, 876 "BOX: %hhu BAY: %hhu %s\n", 877 box, bay, active); 878 } 879 } else if (box != 0 && box != 0xFF) { 880 output_len += scnprintf(buf + output_len, 881 PAGE_SIZE - output_len, "BOX: %hhu %s\n", 882 box, active); 883 } else 884 output_len += scnprintf(buf + output_len, 885 PAGE_SIZE - output_len, "%s\n", active); 886 } 887 888 spin_unlock_irqrestore(&h->devlock, flags); 889 return output_len; 890} 891 892static ssize_t host_show_ctlr_num(struct device *dev, 893 struct device_attribute *attr, char *buf) 894{ 895 struct ctlr_info *h; 896 struct Scsi_Host *shost = class_to_shost(dev); 897 898 h = shost_to_hba(shost); 899 return snprintf(buf, 20, "%d\n", h->ctlr); 900} 901 902static ssize_t host_show_legacy_board(struct device *dev, 903 struct device_attribute *attr, char *buf) 904{ 905 struct ctlr_info *h; 906 struct Scsi_Host *shost = class_to_shost(dev); 907 908 h = shost_to_hba(shost); 909 return snprintf(buf, 20, "%d\n", h->legacy_board ? 1 : 0); 910} 911 912static DEVICE_ATTR_RO(raid_level); 913static DEVICE_ATTR_RO(lunid); 914static DEVICE_ATTR_RO(unique_id); 915static DEVICE_ATTR(rescan, S_IWUSR, NULL, host_store_rescan); 916static DEVICE_ATTR_RO(sas_address); 917static DEVICE_ATTR(hp_ssd_smart_path_enabled, S_IRUGO, 918 host_show_hp_ssd_smart_path_enabled, NULL); 919static DEVICE_ATTR_RO(path_info); 920static DEVICE_ATTR(hp_ssd_smart_path_status, S_IWUSR|S_IRUGO|S_IROTH, 921 host_show_hp_ssd_smart_path_status, 922 host_store_hp_ssd_smart_path_status); 923static DEVICE_ATTR(raid_offload_debug, S_IWUSR, NULL, 924 host_store_raid_offload_debug); 925static DEVICE_ATTR(firmware_revision, S_IRUGO, 926 host_show_firmware_revision, NULL); 927static DEVICE_ATTR(commands_outstanding, S_IRUGO, 928 host_show_commands_outstanding, NULL); 929static DEVICE_ATTR(transport_mode, S_IRUGO, 930 host_show_transport_mode, NULL); 931static DEVICE_ATTR(resettable, S_IRUGO, 932 host_show_resettable, NULL); 933static DEVICE_ATTR(lockup_detected, S_IRUGO, 934 host_show_lockup_detected, NULL); 935static DEVICE_ATTR(ctlr_num, S_IRUGO, 936 host_show_ctlr_num, NULL); 937static DEVICE_ATTR(legacy_board, S_IRUGO, 938 host_show_legacy_board, NULL); 939 940static struct device_attribute *hpsa_sdev_attrs[] = { 941 &dev_attr_raid_level, 942 &dev_attr_lunid, 943 &dev_attr_unique_id, 944 &dev_attr_hp_ssd_smart_path_enabled, 945 &dev_attr_path_info, 946 &dev_attr_sas_address, 947 NULL, 948}; 949 950static struct device_attribute *hpsa_shost_attrs[] = { 951 &dev_attr_rescan, 952 &dev_attr_firmware_revision, 953 &dev_attr_commands_outstanding, 954 &dev_attr_transport_mode, 955 &dev_attr_resettable, 956 &dev_attr_hp_ssd_smart_path_status, 957 &dev_attr_raid_offload_debug, 958 &dev_attr_lockup_detected, 959 &dev_attr_ctlr_num, 960 &dev_attr_legacy_board, 961 NULL, 962}; 963 964#define HPSA_NRESERVED_CMDS (HPSA_CMDS_RESERVED_FOR_DRIVER +\ 965 HPSA_MAX_CONCURRENT_PASSTHRUS) 966 967static struct scsi_host_template hpsa_driver_template = { 968 .module = THIS_MODULE, 969 .name = HPSA, 970 .proc_name = HPSA, 971 .queuecommand = hpsa_scsi_queue_command, 972 .scan_start = hpsa_scan_start, 973 .scan_finished = hpsa_scan_finished, 974 .change_queue_depth = hpsa_change_queue_depth, 975 .this_id = -1, 976 .eh_device_reset_handler = hpsa_eh_device_reset_handler, 977 .ioctl = hpsa_ioctl, 978 .slave_alloc = hpsa_slave_alloc, 979 .slave_configure = hpsa_slave_configure, 980 .slave_destroy = hpsa_slave_destroy, 981#ifdef CONFIG_COMPAT 982 .compat_ioctl = hpsa_compat_ioctl, 983#endif 984 .sdev_attrs = hpsa_sdev_attrs, 985 .shost_attrs = hpsa_shost_attrs, 986 .max_sectors = 2048, 987 .no_write_same = 1, 988}; 989 990static inline u32 next_command(struct ctlr_info *h, u8 q) 991{ 992 u32 a; 993 struct reply_queue_buffer *rq = &h->reply_queue[q]; 994 995 if (h->transMethod & CFGTBL_Trans_io_accel1) 996 return h->access.command_completed(h, q); 997 998 if (unlikely(!(h->transMethod & CFGTBL_Trans_Performant))) 999 return h->access.command_completed(h, q); 1000 1001 if ((rq->head[rq->current_entry] & 1) == rq->wraparound) { 1002 a = rq->head[rq->current_entry]; 1003 rq->current_entry++; 1004 atomic_dec(&h->commands_outstanding); 1005 } else { 1006 a = FIFO_EMPTY; 1007 } 1008 /* Check for wraparound */ 1009 if (rq->current_entry == h->max_commands) { 1010 rq->current_entry = 0; 1011 rq->wraparound ^= 1; 1012 } 1013 return a; 1014} 1015 1016/* 1017 * There are some special bits in the bus address of the 1018 * command that we have to set for the controller to know 1019 * how to process the command: 1020 * 1021 * Normal performant mode: 1022 * bit 0: 1 means performant mode, 0 means simple mode. 1023 * bits 1-3 = block fetch table entry 1024 * bits 4-6 = command type (== 0) 1025 * 1026 * ioaccel1 mode: 1027 * bit 0 = "performant mode" bit. 1028 * bits 1-3 = block fetch table entry 1029 * bits 4-6 = command type (== 110) 1030 * (command type is needed because ioaccel1 mode 1031 * commands are submitted through the same register as normal 1032 * mode commands, so this is how the controller knows whether 1033 * the command is normal mode or ioaccel1 mode.) 1034 * 1035 * ioaccel2 mode: 1036 * bit 0 = "performant mode" bit. 1037 * bits 1-4 = block fetch table entry (note extra bit) 1038 * bits 4-6 = not needed, because ioaccel2 mode has 1039 * a separate special register for submitting commands. 1040 */ 1041 1042/* 1043 * set_performant_mode: Modify the tag for cciss performant 1044 * set bit 0 for pull model, bits 3-1 for block fetch 1045 * register number 1046 */ 1047#define DEFAULT_REPLY_QUEUE (-1) 1048static void set_performant_mode(struct ctlr_info *h, struct CommandList *c, 1049 int reply_queue) 1050{ 1051 if (likely(h->transMethod & CFGTBL_Trans_Performant)) { 1052 c->busaddr |= 1 | (h->blockFetchTable[c->Header.SGList] << 1); 1053 if (unlikely(!h->msix_vectors)) 1054 return; 1055 c->Header.ReplyQueue = reply_queue; 1056 } 1057} 1058 1059static void set_ioaccel1_performant_mode(struct ctlr_info *h, 1060 struct CommandList *c, 1061 int reply_queue) 1062{ 1063 struct io_accel1_cmd *cp = &h->ioaccel_cmd_pool[c->cmdindex]; 1064 1065 /* 1066 * Tell the controller to post the reply to the queue for this 1067 * processor. This seems to give the best I/O throughput. 1068 */ 1069 cp->ReplyQueue = reply_queue; 1070 /* 1071 * Set the bits in the address sent down to include: 1072 * - performant mode bit (bit 0) 1073 * - pull count (bits 1-3) 1074 * - command type (bits 4-6) 1075 */ 1076 c->busaddr |= 1 | (h->ioaccel1_blockFetchTable[c->Header.SGList] << 1) | 1077 IOACCEL1_BUSADDR_CMDTYPE; 1078} 1079 1080static void set_ioaccel2_tmf_performant_mode(struct ctlr_info *h, 1081 struct CommandList *c, 1082 int reply_queue) 1083{ 1084 struct hpsa_tmf_struct *cp = (struct hpsa_tmf_struct *) 1085 &h->ioaccel2_cmd_pool[c->cmdindex]; 1086 1087 /* Tell the controller to post the reply to the queue for this 1088 * processor. This seems to give the best I/O throughput. 1089 */ 1090 cp->reply_queue = reply_queue; 1091 /* Set the bits in the address sent down to include: 1092 * - performant mode bit not used in ioaccel mode 2 1093 * - pull count (bits 0-3) 1094 * - command type isn't needed for ioaccel2 1095 */ 1096 c->busaddr |= h->ioaccel2_blockFetchTable[0]; 1097} 1098 1099static void set_ioaccel2_performant_mode(struct ctlr_info *h, 1100 struct CommandList *c, 1101 int reply_queue) 1102{ 1103 struct io_accel2_cmd *cp = &h->ioaccel2_cmd_pool[c->cmdindex]; 1104 1105 /* 1106 * Tell the controller to post the reply to the queue for this 1107 * processor. This seems to give the best I/O throughput. 1108 */ 1109 cp->reply_queue = reply_queue; 1110 /* 1111 * Set the bits in the address sent down to include: 1112 * - performant mode bit not used in ioaccel mode 2 1113 * - pull count (bits 0-3) 1114 * - command type isn't needed for ioaccel2 1115 */ 1116 c->busaddr |= (h->ioaccel2_blockFetchTable[cp->sg_count]); 1117} 1118 1119static int is_firmware_flash_cmd(u8 *cdb) 1120{ 1121 return cdb[0] == BMIC_WRITE && cdb[6] == BMIC_FLASH_FIRMWARE; 1122} 1123 1124/* 1125 * During firmware flash, the heartbeat register may not update as frequently 1126 * as it should. So we dial down lockup detection during firmware flash. and 1127 * dial it back up when firmware flash completes. 1128 */ 1129#define HEARTBEAT_SAMPLE_INTERVAL_DURING_FLASH (240 * HZ) 1130#define HEARTBEAT_SAMPLE_INTERVAL (30 * HZ) 1131#define HPSA_EVENT_MONITOR_INTERVAL (15 * HZ) 1132static void dial_down_lockup_detection_during_fw_flash(struct ctlr_info *h, 1133 struct CommandList *c) 1134{ 1135 if (!is_firmware_flash_cmd(c->Request.CDB)) 1136 return; 1137 atomic_inc(&h->firmware_flash_in_progress); 1138 h->heartbeat_sample_interval = HEARTBEAT_SAMPLE_INTERVAL_DURING_FLASH; 1139} 1140 1141static void dial_up_lockup_detection_on_fw_flash_complete(struct ctlr_info *h, 1142 struct CommandList *c) 1143{ 1144 if (is_firmware_flash_cmd(c->Request.CDB) && 1145 atomic_dec_and_test(&h->firmware_flash_in_progress)) 1146 h->heartbeat_sample_interval = HEARTBEAT_SAMPLE_INTERVAL; 1147} 1148 1149static void __enqueue_cmd_and_start_io(struct ctlr_info *h, 1150 struct CommandList *c, int reply_queue) 1151{ 1152 dial_down_lockup_detection_during_fw_flash(h, c); 1153 atomic_inc(&h->commands_outstanding); 1154 if (c->device) 1155 atomic_inc(&c->device->commands_outstanding); 1156 1157 reply_queue = h->reply_map[raw_smp_processor_id()]; 1158 switch (c->cmd_type) { 1159 case CMD_IOACCEL1: 1160 set_ioaccel1_performant_mode(h, c, reply_queue); 1161 writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET); 1162 break; 1163 case CMD_IOACCEL2: 1164 set_ioaccel2_performant_mode(h, c, reply_queue); 1165 writel(c->busaddr, h->vaddr + IOACCEL2_INBOUND_POSTQ_32); 1166 break; 1167 case IOACCEL2_TMF: 1168 set_ioaccel2_tmf_performant_mode(h, c, reply_queue); 1169 writel(c->busaddr, h->vaddr + IOACCEL2_INBOUND_POSTQ_32); 1170 break; 1171 default: 1172 set_performant_mode(h, c, reply_queue); 1173 h->access.submit_command(h, c); 1174 } 1175} 1176 1177static void enqueue_cmd_and_start_io(struct ctlr_info *h, struct CommandList *c) 1178{ 1179 __enqueue_cmd_and_start_io(h, c, DEFAULT_REPLY_QUEUE); 1180} 1181 1182static inline int is_hba_lunid(unsigned char scsi3addr[]) 1183{ 1184 return memcmp(scsi3addr, RAID_CTLR_LUNID, 8) == 0; 1185} 1186 1187static inline int is_scsi_rev_5(struct ctlr_info *h) 1188{ 1189 if (!h->hba_inquiry_data) 1190 return 0; 1191 if ((h->hba_inquiry_data[2] & 0x07) == 5) 1192 return 1; 1193 return 0; 1194} 1195 1196static int hpsa_find_target_lun(struct ctlr_info *h, 1197 unsigned char scsi3addr[], int bus, int *target, int *lun) 1198{ 1199 /* finds an unused bus, target, lun for a new physical device 1200 * assumes h->devlock is held 1201 */ 1202 int i, found = 0; 1203 DECLARE_BITMAP(lun_taken, HPSA_MAX_DEVICES); 1204 1205 bitmap_zero(lun_taken, HPSA_MAX_DEVICES); 1206 1207 for (i = 0; i < h->ndevices; i++) { 1208 if (h->dev[i]->bus == bus && h->dev[i]->target != -1) 1209 __set_bit(h->dev[i]->target, lun_taken); 1210 } 1211 1212 i = find_first_zero_bit(lun_taken, HPSA_MAX_DEVICES); 1213 if (i < HPSA_MAX_DEVICES) { 1214 /* *bus = 1; */ 1215 *target = i; 1216 *lun = 0; 1217 found = 1; 1218 } 1219 return !found; 1220} 1221 1222static void hpsa_show_dev_msg(const char *level, struct ctlr_info *h, 1223 struct hpsa_scsi_dev_t *dev, char *description) 1224{ 1225#define LABEL_SIZE 25 1226 char label[LABEL_SIZE]; 1227 1228 if (h == NULL || h->pdev == NULL || h->scsi_host == NULL) 1229 return; 1230 1231 switch (dev->devtype) { 1232 case TYPE_RAID: 1233 snprintf(label, LABEL_SIZE, "controller"); 1234 break; 1235 case TYPE_ENCLOSURE: 1236 snprintf(label, LABEL_SIZE, "enclosure"); 1237 break; 1238 case TYPE_DISK: 1239 case TYPE_ZBC: 1240 if (dev->external) 1241 snprintf(label, LABEL_SIZE, "external"); 1242 else if (!is_logical_dev_addr_mode(dev->scsi3addr)) 1243 snprintf(label, LABEL_SIZE, "%s", 1244 raid_label[PHYSICAL_DRIVE]); 1245 else 1246 snprintf(label, LABEL_SIZE, "RAID-%s", 1247 dev->raid_level > RAID_UNKNOWN ? "?" : 1248 raid_label[dev->raid_level]); 1249 break; 1250 case TYPE_ROM: 1251 snprintf(label, LABEL_SIZE, "rom"); 1252 break; 1253 case TYPE_TAPE: 1254 snprintf(label, LABEL_SIZE, "tape"); 1255 break; 1256 case TYPE_MEDIUM_CHANGER: 1257 snprintf(label, LABEL_SIZE, "changer"); 1258 break; 1259 default: 1260 snprintf(label, LABEL_SIZE, "UNKNOWN"); 1261 break; 1262 } 1263 1264 dev_printk(level, &h->pdev->dev, 1265 "scsi %d:%d:%d:%d: %s %s %.8s %.16s %s SSDSmartPathCap%c En%c Exp=%d\n", 1266 h->scsi_host->host_no, dev->bus, dev->target, dev->lun, 1267 description, 1268 scsi_device_type(dev->devtype), 1269 dev->vendor, 1270 dev->model, 1271 label, 1272 dev->offload_config ? '+' : '-', 1273 dev->offload_to_be_enabled ? '+' : '-', 1274 dev->expose_device); 1275} 1276 1277/* Add an entry into h->dev[] array. */ 1278static int hpsa_scsi_add_entry(struct ctlr_info *h, 1279 struct hpsa_scsi_dev_t *device, 1280 struct hpsa_scsi_dev_t *added[], int *nadded) 1281{ 1282 /* assumes h->devlock is held */ 1283 int n = h->ndevices; 1284 int i; 1285 unsigned char addr1[8], addr2[8]; 1286 struct hpsa_scsi_dev_t *sd; 1287 1288 if (n >= HPSA_MAX_DEVICES) { 1289 dev_err(&h->pdev->dev, "too many devices, some will be " 1290 "inaccessible.\n"); 1291 return -1; 1292 } 1293 1294 /* physical devices do not have lun or target assigned until now. */ 1295 if (device->lun != -1) 1296 /* Logical device, lun is already assigned. */ 1297 goto lun_assigned; 1298 1299 /* If this device a non-zero lun of a multi-lun device 1300 * byte 4 of the 8-byte LUN addr will contain the logical 1301 * unit no, zero otherwise. 1302 */ 1303 if (device->scsi3addr[4] == 0) { 1304 /* This is not a non-zero lun of a multi-lun device */ 1305 if (hpsa_find_target_lun(h, device->scsi3addr, 1306 device->bus, &device->target, &device->lun) != 0) 1307 return -1; 1308 goto lun_assigned; 1309 } 1310 1311 /* This is a non-zero lun of a multi-lun device. 1312 * Search through our list and find the device which 1313 * has the same 8 byte LUN address, excepting byte 4 and 5. 1314 * Assign the same bus and target for this new LUN. 1315 * Use the logical unit number from the firmware. 1316 */ 1317 memcpy(addr1, device->scsi3addr, 8); 1318 addr1[4] = 0; 1319 addr1[5] = 0; 1320 for (i = 0; i < n; i++) { 1321 sd = h->dev[i]; 1322 memcpy(addr2, sd->scsi3addr, 8); 1323 addr2[4] = 0; 1324 addr2[5] = 0; 1325 /* differ only in byte 4 and 5? */ 1326 if (memcmp(addr1, addr2, 8) == 0) { 1327 device->bus = sd->bus; 1328 device->target = sd->target; 1329 device->lun = device->scsi3addr[4]; 1330 break; 1331 } 1332 } 1333 if (device->lun == -1) { 1334 dev_warn(&h->pdev->dev, "physical device with no LUN=0," 1335 " suspect firmware bug or unsupported hardware " 1336 "configuration.\n"); 1337 return -1; 1338 } 1339 1340lun_assigned: 1341 1342 h->dev[n] = device; 1343 h->ndevices++; 1344 added[*nadded] = device; 1345 (*nadded)++; 1346 hpsa_show_dev_msg(KERN_INFO, h, device, 1347 device->expose_device ? "added" : "masked"); 1348 return 0; 1349} 1350 1351/* 1352 * Called during a scan operation. 1353 * 1354 * Update an entry in h->dev[] array. 1355 */ 1356static void hpsa_scsi_update_entry(struct ctlr_info *h, 1357 int entry, struct hpsa_scsi_dev_t *new_entry) 1358{ 1359 /* assumes h->devlock is held */ 1360 BUG_ON(entry < 0 || entry >= HPSA_MAX_DEVICES); 1361 1362 /* Raid level changed. */ 1363 h->dev[entry]->raid_level = new_entry->raid_level; 1364 1365 /* 1366 * ioacccel_handle may have changed for a dual domain disk 1367 */ 1368 h->dev[entry]->ioaccel_handle = new_entry->ioaccel_handle; 1369 1370 /* Raid offload parameters changed. Careful about the ordering. */ 1371 if (new_entry->offload_config && new_entry->offload_to_be_enabled) { 1372 /* 1373 * if drive is newly offload_enabled, we want to copy the 1374 * raid map data first. If previously offload_enabled and 1375 * offload_config were set, raid map data had better be 1376 * the same as it was before. If raid map data has changed 1377 * then it had better be the case that 1378 * h->dev[entry]->offload_enabled is currently 0. 1379 */ 1380 h->dev[entry]->raid_map = new_entry->raid_map; 1381 h->dev[entry]->ioaccel_handle = new_entry->ioaccel_handle; 1382 } 1383 if (new_entry->offload_to_be_enabled) { 1384 h->dev[entry]->ioaccel_handle = new_entry->ioaccel_handle; 1385 wmb(); /* set ioaccel_handle *before* hba_ioaccel_enabled */ 1386 } 1387 h->dev[entry]->hba_ioaccel_enabled = new_entry->hba_ioaccel_enabled; 1388 h->dev[entry]->offload_config = new_entry->offload_config; 1389 h->dev[entry]->offload_to_mirror = new_entry->offload_to_mirror; 1390 h->dev[entry]->queue_depth = new_entry->queue_depth; 1391 1392 /* 1393 * We can turn off ioaccel offload now, but need to delay turning 1394 * ioaccel on until we can update h->dev[entry]->phys_disk[], but we 1395 * can't do that until all the devices are updated. 1396 */ 1397 h->dev[entry]->offload_to_be_enabled = new_entry->offload_to_be_enabled; 1398 1399 /* 1400 * turn ioaccel off immediately if told to do so. 1401 */ 1402 if (!new_entry->offload_to_be_enabled) 1403 h->dev[entry]->offload_enabled = 0; 1404 1405 hpsa_show_dev_msg(KERN_INFO, h, h->dev[entry], "updated"); 1406} 1407 1408/* Replace an entry from h->dev[] array. */ 1409static void hpsa_scsi_replace_entry(struct ctlr_info *h, 1410 int entry, struct hpsa_scsi_dev_t *new_entry, 1411 struct hpsa_scsi_dev_t *added[], int *nadded, 1412 struct hpsa_scsi_dev_t *removed[], int *nremoved) 1413{ 1414 /* assumes h->devlock is held */ 1415 BUG_ON(entry < 0 || entry >= HPSA_MAX_DEVICES); 1416 removed[*nremoved] = h->dev[entry]; 1417 (*nremoved)++; 1418 1419 /* 1420 * New physical devices won't have target/lun assigned yet 1421 * so we need to preserve the values in the slot we are replacing. 1422 */ 1423 if (new_entry->target == -1) { 1424 new_entry->target = h->dev[entry]->target; 1425 new_entry->lun = h->dev[entry]->lun; 1426 } 1427 1428 h->dev[entry] = new_entry; 1429 added[*nadded] = new_entry; 1430 (*nadded)++; 1431 1432 hpsa_show_dev_msg(KERN_INFO, h, new_entry, "replaced"); 1433} 1434 1435/* Remove an entry from h->dev[] array. */ 1436static void hpsa_scsi_remove_entry(struct ctlr_info *h, int entry, 1437 struct hpsa_scsi_dev_t *removed[], int *nremoved) 1438{ 1439 /* assumes h->devlock is held */ 1440 int i; 1441 struct hpsa_scsi_dev_t *sd; 1442 1443 BUG_ON(entry < 0 || entry >= HPSA_MAX_DEVICES); 1444 1445 sd = h->dev[entry]; 1446 removed[*nremoved] = h->dev[entry]; 1447 (*nremoved)++; 1448 1449 for (i = entry; i < h->ndevices-1; i++) 1450 h->dev[i] = h->dev[i+1]; 1451 h->ndevices--; 1452 hpsa_show_dev_msg(KERN_INFO, h, sd, "removed"); 1453} 1454 1455#define SCSI3ADDR_EQ(a, b) ( \ 1456 (a)[7] == (b)[7] && \ 1457 (a)[6] == (b)[6] && \ 1458 (a)[5] == (b)[5] && \ 1459 (a)[4] == (b)[4] && \ 1460 (a)[3] == (b)[3] && \ 1461 (a)[2] == (b)[2] && \ 1462 (a)[1] == (b)[1] && \ 1463 (a)[0] == (b)[0]) 1464 1465static void fixup_botched_add(struct ctlr_info *h, 1466 struct hpsa_scsi_dev_t *added) 1467{ 1468 /* called when scsi_add_device fails in order to re-adjust 1469 * h->dev[] to match the mid layer's view. 1470 */ 1471 unsigned long flags; 1472 int i, j; 1473 1474 spin_lock_irqsave(&h->lock, flags); 1475 for (i = 0; i < h->ndevices; i++) { 1476 if (h->dev[i] == added) { 1477 for (j = i; j < h->ndevices-1; j++) 1478 h->dev[j] = h->dev[j+1]; 1479 h->ndevices--; 1480 break; 1481 } 1482 } 1483 spin_unlock_irqrestore(&h->lock, flags); 1484 kfree(added); 1485} 1486 1487static inline int device_is_the_same(struct hpsa_scsi_dev_t *dev1, 1488 struct hpsa_scsi_dev_t *dev2) 1489{ 1490 /* we compare everything except lun and target as these 1491 * are not yet assigned. Compare parts likely 1492 * to differ first 1493 */ 1494 if (memcmp(dev1->scsi3addr, dev2->scsi3addr, 1495 sizeof(dev1->scsi3addr)) != 0) 1496 return 0; 1497 if (memcmp(dev1->device_id, dev2->device_id, 1498 sizeof(dev1->device_id)) != 0) 1499 return 0; 1500 if (memcmp(dev1->model, dev2->model, sizeof(dev1->model)) != 0) 1501 return 0; 1502 if (memcmp(dev1->vendor, dev2->vendor, sizeof(dev1->vendor)) != 0) 1503 return 0; 1504 if (dev1->devtype != dev2->devtype) 1505 return 0; 1506 if (dev1->bus != dev2->bus) 1507 return 0; 1508 return 1; 1509} 1510 1511static inline int device_updated(struct hpsa_scsi_dev_t *dev1, 1512 struct hpsa_scsi_dev_t *dev2) 1513{ 1514 /* Device attributes that can change, but don't mean 1515 * that the device is a different device, nor that the OS 1516 * needs to be told anything about the change. 1517 */ 1518 if (dev1->raid_level != dev2->raid_level) 1519 return 1; 1520 if (dev1->offload_config != dev2->offload_config) 1521 return 1; 1522 if (dev1->offload_to_be_enabled != dev2->offload_to_be_enabled) 1523 return 1; 1524 if (!is_logical_dev_addr_mode(dev1->scsi3addr)) 1525 if (dev1->queue_depth != dev2->queue_depth) 1526 return 1; 1527 /* 1528 * This can happen for dual domain devices. An active 1529 * path change causes the ioaccel handle to change 1530 * 1531 * for example note the handle differences between p0 and p1 1532 * Device WWN ,WWN hash,Handle 1533 * D016 p0|0x3 [02]P2E:01:01,0x5000C5005FC4DACA,0x9B5616,0x01030003 1534 * p1 0x5000C5005FC4DAC9,0x6798C0,0x00040004 1535 */ 1536 if (dev1->ioaccel_handle != dev2->ioaccel_handle) 1537 return 1; 1538 return 0; 1539} 1540 1541/* Find needle in haystack. If exact match found, return DEVICE_SAME, 1542 * and return needle location in *index. If scsi3addr matches, but not 1543 * vendor, model, serial num, etc. return DEVICE_CHANGED, and return needle 1544 * location in *index. 1545 * In the case of a minor device attribute change, such as RAID level, just 1546 * return DEVICE_UPDATED, along with the updated device's location in index. 1547 * If needle not found, return DEVICE_NOT_FOUND. 1548 */ 1549static int hpsa_scsi_find_entry(struct hpsa_scsi_dev_t *needle, 1550 struct hpsa_scsi_dev_t *haystack[], int haystack_size, 1551 int *index) 1552{ 1553 int i; 1554#define DEVICE_NOT_FOUND 0 1555#define DEVICE_CHANGED 1 1556#define DEVICE_SAME 2 1557#define DEVICE_UPDATED 3 1558 if (needle == NULL) 1559 return DEVICE_NOT_FOUND; 1560 1561 for (i = 0; i < haystack_size; i++) { 1562 if (haystack[i] == NULL) /* previously removed. */ 1563 continue; 1564 if (SCSI3ADDR_EQ(needle->scsi3addr, haystack[i]->scsi3addr)) { 1565 *index = i; 1566 if (device_is_the_same(needle, haystack[i])) { 1567 if (device_updated(needle, haystack[i])) 1568 return DEVICE_UPDATED; 1569 return DEVICE_SAME; 1570 } else { 1571 /* Keep offline devices offline */ 1572 if (needle->volume_offline) 1573 return DEVICE_NOT_FOUND; 1574 return DEVICE_CHANGED; 1575 } 1576 } 1577 } 1578 *index = -1; 1579 return DEVICE_NOT_FOUND; 1580} 1581 1582static void hpsa_monitor_offline_device(struct ctlr_info *h, 1583 unsigned char scsi3addr[]) 1584{ 1585 struct offline_device_entry *device; 1586 unsigned long flags; 1587 1588 /* Check to see if device is already on the list */ 1589 spin_lock_irqsave(&h->offline_device_lock, flags); 1590 list_for_each_entry(device, &h->offline_device_list, offline_list) { 1591 if (memcmp(device->scsi3addr, scsi3addr, 1592 sizeof(device->scsi3addr)) == 0) { 1593 spin_unlock_irqrestore(&h->offline_device_lock, flags); 1594 return; 1595 } 1596 } 1597 spin_unlock_irqrestore(&h->offline_device_lock, flags); 1598 1599 /* Device is not on the list, add it. */ 1600 device = kmalloc(sizeof(*device), GFP_KERNEL); 1601 if (!device) 1602 return; 1603 1604 memcpy(device->scsi3addr, scsi3addr, sizeof(device->scsi3addr)); 1605 spin_lock_irqsave(&h->offline_device_lock, flags); 1606 list_add_tail(&device->offline_list, &h->offline_device_list); 1607 spin_unlock_irqrestore(&h->offline_device_lock, flags); 1608} 1609 1610/* Print a message explaining various offline volume states */ 1611static void hpsa_show_volume_status(struct ctlr_info *h, 1612 struct hpsa_scsi_dev_t *sd) 1613{ 1614 if (sd->volume_offline == HPSA_VPD_LV_STATUS_UNSUPPORTED) 1615 dev_info(&h->pdev->dev, 1616 "C%d:B%d:T%d:L%d Volume status is not available through vital product data pages.\n", 1617 h->scsi_host->host_no, 1618 sd->bus, sd->target, sd->lun); 1619 switch (sd->volume_offline) { 1620 case HPSA_LV_OK: 1621 break; 1622 case HPSA_LV_UNDERGOING_ERASE: 1623 dev_info(&h->pdev->dev, 1624 "C%d:B%d:T%d:L%d Volume is undergoing background erase process.\n", 1625 h->scsi_host->host_no, 1626 sd->bus, sd->target, sd->lun); 1627 break; 1628 case HPSA_LV_NOT_AVAILABLE: 1629 dev_info(&h->pdev->dev, 1630 "C%d:B%d:T%d:L%d Volume is waiting for transforming volume.\n", 1631 h->scsi_host->host_no, 1632 sd->bus, sd->target, sd->lun); 1633 break; 1634 case HPSA_LV_UNDERGOING_RPI: 1635 dev_info(&h->pdev->dev, 1636 "C%d:B%d:T%d:L%d Volume is undergoing rapid parity init.\n", 1637 h->scsi_host->host_no, 1638 sd->bus, sd->target, sd->lun); 1639 break; 1640 case HPSA_LV_PENDING_RPI: 1641 dev_info(&h->pdev->dev, 1642 "C%d:B%d:T%d:L%d Volume is queued for rapid parity initialization process.\n", 1643 h->scsi_host->host_no, 1644 sd->bus, sd->target, sd->lun); 1645 break; 1646 case HPSA_LV_ENCRYPTED_NO_KEY: 1647 dev_info(&h->pdev->dev, 1648 "C%d:B%d:T%d:L%d Volume is encrypted and cannot be accessed because key is not present.\n", 1649 h->scsi_host->host_no, 1650 sd->bus, sd->target, sd->lun); 1651 break; 1652 case HPSA_LV_PLAINTEXT_IN_ENCRYPT_ONLY_CONTROLLER: 1653 dev_info(&h->pdev->dev, 1654 "C%d:B%d:T%d:L%d Volume is not encrypted and cannot be accessed because controller is in encryption-only mode.\n", 1655 h->scsi_host->host_no, 1656 sd->bus, sd->target, sd->lun); 1657 break; 1658 case HPSA_LV_UNDERGOING_ENCRYPTION: 1659 dev_info(&h->pdev->dev, 1660 "C%d:B%d:T%d:L%d Volume is undergoing encryption process.\n", 1661 h->scsi_host->host_no, 1662 sd->bus, sd->target, sd->lun); 1663 break; 1664 case HPSA_LV_UNDERGOING_ENCRYPTION_REKEYING: 1665 dev_info(&h->pdev->dev, 1666 "C%d:B%d:T%d:L%d Volume is undergoing encryption re-keying process.\n", 1667 h->scsi_host->host_no, 1668 sd->bus, sd->target, sd->lun); 1669 break; 1670 case HPSA_LV_ENCRYPTED_IN_NON_ENCRYPTED_CONTROLLER: 1671 dev_info(&h->pdev->dev, 1672 "C%d:B%d:T%d:L%d Volume is encrypted and cannot be accessed because controller does not have encryption enabled.\n", 1673 h->scsi_host->host_no, 1674 sd->bus, sd->target, sd->lun); 1675 break; 1676 case HPSA_LV_PENDING_ENCRYPTION: 1677 dev_info(&h->pdev->dev, 1678 "C%d:B%d:T%d:L%d Volume is pending migration to encrypted state, but process has not started.\n", 1679 h->scsi_host->host_no, 1680 sd->bus, sd->target, sd->lun); 1681 break; 1682 case HPSA_LV_PENDING_ENCRYPTION_REKEYING: 1683 dev_info(&h->pdev->dev, 1684 "C%d:B%d:T%d:L%d Volume is encrypted and is pending encryption rekeying.\n", 1685 h->scsi_host->host_no, 1686 sd->bus, sd->target, sd->lun); 1687 break; 1688 } 1689} 1690 1691/* 1692 * Figure the list of physical drive pointers for a logical drive with 1693 * raid offload configured. 1694 */ 1695static void hpsa_figure_phys_disk_ptrs(struct ctlr_info *h, 1696 struct hpsa_scsi_dev_t *dev[], int ndevices, 1697 struct hpsa_scsi_dev_t *logical_drive) 1698{ 1699 struct raid_map_data *map = &logical_drive->raid_map; 1700 struct raid_map_disk_data *dd = &map->data[0]; 1701 int i, j; 1702 int total_disks_per_row = le16_to_cpu(map->data_disks_per_row) + 1703 le16_to_cpu(map->metadata_disks_per_row); 1704 int nraid_map_entries = le16_to_cpu(map->row_cnt) * 1705 le16_to_cpu(map->layout_map_count) * 1706 total_disks_per_row; 1707 int nphys_disk = le16_to_cpu(map->layout_map_count) * 1708 total_disks_per_row; 1709 int qdepth; 1710 1711 if (nraid_map_entries > RAID_MAP_MAX_ENTRIES) 1712 nraid_map_entries = RAID_MAP_MAX_ENTRIES; 1713 1714 logical_drive->nphysical_disks = nraid_map_entries; 1715 1716 qdepth = 0; 1717 for (i = 0; i < nraid_map_entries; i++) { 1718 logical_drive->phys_disk[i] = NULL; 1719 if (!logical_drive->offload_config) 1720 continue; 1721 for (j = 0; j < ndevices; j++) { 1722 if (dev[j] == NULL) 1723 continue; 1724 if (dev[j]->devtype != TYPE_DISK && 1725 dev[j]->devtype != TYPE_ZBC) 1726 continue; 1727 if (is_logical_device(dev[j])) 1728 continue; 1729 if (dev[j]->ioaccel_handle != dd[i].ioaccel_handle) 1730 continue; 1731 1732 logical_drive->phys_disk[i] = dev[j]; 1733 if (i < nphys_disk) 1734 qdepth = min(h->nr_cmds, qdepth + 1735 logical_drive->phys_disk[i]->queue_depth); 1736 break; 1737 } 1738 1739 /* 1740 * This can happen if a physical drive is removed and 1741 * the logical drive is degraded. In that case, the RAID 1742 * map data will refer to a physical disk which isn't actually 1743 * present. And in that case offload_enabled should already 1744 * be 0, but we'll turn it off here just in case 1745 */ 1746 if (!logical_drive->phys_disk[i]) { 1747 dev_warn(&h->pdev->dev, 1748 "%s: [%d:%d:%d:%d] A phys disk component of LV is missing, turning off offload_enabled for LV.\n", 1749 __func__, 1750 h->scsi_host->host_no, logical_drive->bus, 1751 logical_drive->target, logical_drive->lun); 1752 hpsa_turn_off_ioaccel_for_device(logical_drive); 1753 logical_drive->queue_depth = 8; 1754 } 1755 } 1756 if (nraid_map_entries) 1757 /* 1758 * This is correct for reads, too high for full stripe writes, 1759 * way too high for partial stripe writes 1760 */ 1761 logical_drive->queue_depth = qdepth; 1762 else { 1763 if (logical_drive->external) 1764 logical_drive->queue_depth = EXTERNAL_QD; 1765 else 1766 logical_drive->queue_depth = h->nr_cmds; 1767 } 1768} 1769 1770static void hpsa_update_log_drive_phys_drive_ptrs(struct ctlr_info *h, 1771 struct hpsa_scsi_dev_t *dev[], int ndevices) 1772{ 1773 int i; 1774 1775 for (i = 0; i < ndevices; i++) { 1776 if (dev[i] == NULL) 1777 continue; 1778 if (dev[i]->devtype != TYPE_DISK && 1779 dev[i]->devtype != TYPE_ZBC) 1780 continue; 1781 if (!is_logical_device(dev[i])) 1782 continue; 1783 1784 /* 1785 * If offload is currently enabled, the RAID map and 1786 * phys_disk[] assignment *better* not be changing 1787 * because we would be changing ioaccel phsy_disk[] pointers 1788 * on a ioaccel volume processing I/O requests. 1789 * 1790 * If an ioaccel volume status changed, initially because it was 1791 * re-configured and thus underwent a transformation, or 1792 * a drive failed, we would have received a state change 1793 * request and ioaccel should have been turned off. When the 1794 * transformation completes, we get another state change 1795 * request to turn ioaccel back on. In this case, we need 1796 * to update the ioaccel information. 1797 * 1798 * Thus: If it is not currently enabled, but will be after 1799 * the scan completes, make sure the ioaccel pointers 1800 * are up to date. 1801 */ 1802 1803 if (!dev[i]->offload_enabled && dev[i]->offload_to_be_enabled) 1804 hpsa_figure_phys_disk_ptrs(h, dev, ndevices, dev[i]); 1805 } 1806} 1807 1808static int hpsa_add_device(struct ctlr_info *h, struct hpsa_scsi_dev_t *device) 1809{ 1810 int rc = 0; 1811 1812 if (!h->scsi_host) 1813 return 1; 1814 1815 if (is_logical_device(device)) /* RAID */ 1816 rc = scsi_add_device(h->scsi_host, device->bus, 1817 device->target, device->lun); 1818 else /* HBA */ 1819 rc = hpsa_add_sas_device(h->sas_host, device); 1820 1821 return rc; 1822} 1823 1824static int hpsa_find_outstanding_commands_for_dev(struct ctlr_info *h, 1825 struct hpsa_scsi_dev_t *dev) 1826{ 1827 int i; 1828 int count = 0; 1829 1830 for (i = 0; i < h->nr_cmds; i++) { 1831 struct CommandList *c = h->cmd_pool + i; 1832 int refcount = atomic_inc_return(&c->refcount); 1833 1834 if (refcount > 1 && hpsa_cmd_dev_match(h, c, dev, 1835 dev->scsi3addr)) { 1836 unsigned long flags; 1837 1838 spin_lock_irqsave(&h->lock, flags); /* Implied MB */ 1839 if (!hpsa_is_cmd_idle(c)) 1840 ++count; 1841 spin_unlock_irqrestore(&h->lock, flags); 1842 } 1843 1844 cmd_free(h, c); 1845 } 1846 1847 return count; 1848} 1849 1850#define NUM_WAIT 20 1851static void hpsa_wait_for_outstanding_commands_for_dev(struct ctlr_info *h, 1852 struct hpsa_scsi_dev_t *device) 1853{ 1854 int cmds = 0; 1855 int waits = 0; 1856 int num_wait = NUM_WAIT; 1857 1858 if (device->external) 1859 num_wait = HPSA_EH_PTRAID_TIMEOUT; 1860 1861 while (1) { 1862 cmds = hpsa_find_outstanding_commands_for_dev(h, device); 1863 if (cmds == 0) 1864 break; 1865 if (++waits > num_wait) 1866 break; 1867 msleep(1000); 1868 } 1869 1870 if (waits > num_wait) { 1871 dev_warn(&h->pdev->dev, 1872 "%s: removing device [%d:%d:%d:%d] with %d outstanding commands!\n", 1873 __func__, 1874 h->scsi_host->host_no, 1875 device->bus, device->target, device->lun, cmds); 1876 } 1877} 1878 1879static void hpsa_remove_device(struct ctlr_info *h, 1880 struct hpsa_scsi_dev_t *device) 1881{ 1882 struct scsi_device *sdev = NULL; 1883 1884 if (!h->scsi_host) 1885 return; 1886 1887 /* 1888 * Allow for commands to drain 1889 */ 1890 device->removed = 1; 1891 hpsa_wait_for_outstanding_commands_for_dev(h, device); 1892 1893 if (is_logical_device(device)) { /* RAID */ 1894 sdev = scsi_device_lookup(h->scsi_host, device->bus, 1895 device->target, device->lun); 1896 if (sdev) { 1897 scsi_remove_device(sdev); 1898 scsi_device_put(sdev); 1899 } else { 1900 /* 1901 * We don't expect to get here. Future commands 1902 * to this device will get a selection timeout as 1903 * if the device were gone. 1904 */ 1905 hpsa_show_dev_msg(KERN_WARNING, h, device, 1906 "didn't find device for removal."); 1907 } 1908 } else { /* HBA */ 1909 1910 hpsa_remove_sas_device(device); 1911 } 1912} 1913 1914static void adjust_hpsa_scsi_table(struct ctlr_info *h, 1915 struct hpsa_scsi_dev_t *sd[], int nsds) 1916{ 1917 /* sd contains scsi3 addresses and devtypes, and inquiry 1918 * data. This function takes what's in sd to be the current 1919 * reality and updates h->dev[] to reflect that reality. 1920 */ 1921 int i, entry, device_change, changes = 0; 1922 struct hpsa_scsi_dev_t *csd; 1923 unsigned long flags; 1924 struct hpsa_scsi_dev_t **added, **removed; 1925 int nadded, nremoved; 1926 1927 /* 1928 * A reset can cause a device status to change 1929 * re-schedule the scan to see what happened. 1930 */ 1931 spin_lock_irqsave(&h->reset_lock, flags); 1932 if (h->reset_in_progress) { 1933 h->drv_req_rescan = 1; 1934 spin_unlock_irqrestore(&h->reset_lock, flags); 1935 return; 1936 } 1937 spin_unlock_irqrestore(&h->reset_lock, flags); 1938 1939 added = kcalloc(HPSA_MAX_DEVICES, sizeof(*added), GFP_KERNEL); 1940 removed = kcalloc(HPSA_MAX_DEVICES, sizeof(*removed), GFP_KERNEL); 1941 1942 if (!added || !removed) { 1943 dev_warn(&h->pdev->dev, "out of memory in " 1944 "adjust_hpsa_scsi_table\n"); 1945 goto free_and_out; 1946 } 1947 1948 spin_lock_irqsave(&h->devlock, flags); 1949 1950 /* find any devices in h->dev[] that are not in 1951 * sd[] and remove them from h->dev[], and for any 1952 * devices which have changed, remove the old device 1953 * info and add the new device info. 1954 * If minor device attributes change, just update 1955 * the existing device structure. 1956 */ 1957 i = 0; 1958 nremoved = 0; 1959 nadded = 0; 1960 while (i < h->ndevices) { 1961 csd = h->dev[i]; 1962 device_change = hpsa_scsi_find_entry(csd, sd, nsds, &entry); 1963 if (device_change == DEVICE_NOT_FOUND) { 1964 changes++; 1965 hpsa_scsi_remove_entry(h, i, removed, &nremoved); 1966 continue; /* remove ^^^, hence i not incremented */ 1967 } else if (device_change == DEVICE_CHANGED) { 1968 changes++; 1969 hpsa_scsi_replace_entry(h, i, sd[entry], 1970 added, &nadded, removed, &nremoved); 1971 /* Set it to NULL to prevent it from being freed 1972 * at the bottom of hpsa_update_scsi_devices() 1973 */ 1974 sd[entry] = NULL; 1975 } else if (device_change == DEVICE_UPDATED) { 1976 hpsa_scsi_update_entry(h, i, sd[entry]); 1977 } 1978 i++; 1979 } 1980 1981 /* Now, make sure every device listed in sd[] is also 1982 * listed in h->dev[], adding them if they aren't found 1983 */ 1984 1985 for (i = 0; i < nsds; i++) { 1986 if (!sd[i]) /* if already added above. */ 1987 continue; 1988 1989 /* Don't add devices which are NOT READY, FORMAT IN PROGRESS 1990 * as the SCSI mid-layer does not handle such devices well. 1991 * It relentlessly loops sending TUR at 3Hz, then READ(10) 1992 * at 160Hz, and prevents the system from coming up. 1993 */ 1994 if (sd[i]->volume_offline) { 1995 hpsa_show_volume_status(h, sd[i]); 1996 hpsa_show_dev_msg(KERN_INFO, h, sd[i], "offline"); 1997 continue; 1998 } 1999 2000 device_change = hpsa_scsi_find_entry(sd[i], h->dev, 2001 h->ndevices, &entry); 2002 if (device_change == DEVICE_NOT_FOUND) { 2003 changes++; 2004 if (hpsa_scsi_add_entry(h, sd[i], added, &nadded) != 0) 2005 break; 2006 sd[i] = NULL; /* prevent from being freed later. */ 2007 } else if (device_change == DEVICE_CHANGED) { 2008 /* should never happen... */ 2009 changes++; 2010 dev_warn(&h->pdev->dev, 2011 "device unexpectedly changed.\n"); 2012 /* but if it does happen, we just ignore that device */ 2013 } 2014 } 2015 hpsa_update_log_drive_phys_drive_ptrs(h, h->dev, h->ndevices); 2016 2017 /* 2018 * Now that h->dev[]->phys_disk[] is coherent, we can enable 2019 * any logical drives that need it enabled. 2020 * 2021 * The raid map should be current by now. 2022 * 2023 * We are updating the device list used for I/O requests. 2024 */ 2025 for (i = 0; i < h->ndevices; i++) { 2026 if (h->dev[i] == NULL) 2027 continue; 2028 h->dev[i]->offload_enabled = h->dev[i]->offload_to_be_enabled; 2029 } 2030 2031 spin_unlock_irqrestore(&h->devlock, flags); 2032 2033 /* Monitor devices which are in one of several NOT READY states to be 2034 * brought online later. This must be done without holding h->devlock, 2035 * so don't touch h->dev[] 2036 */ 2037 for (i = 0; i < nsds; i++) { 2038 if (!sd[i]) /* if already added above. */ 2039 continue; 2040 if (sd[i]->volume_offline) 2041 hpsa_monitor_offline_device(h, sd[i]->scsi3addr); 2042 } 2043 2044 /* Don't notify scsi mid layer of any changes the first time through 2045 * (or if there are no changes) scsi_scan_host will do it later the 2046 * first time through. 2047 */ 2048 if (!changes) 2049 goto free_and_out; 2050 2051 /* Notify scsi mid layer of any removed devices */ 2052 for (i = 0; i < nremoved; i++) { 2053 if (removed[i] == NULL) 2054 continue; 2055 if (removed[i]->expose_device) 2056 hpsa_remove_device(h, removed[i]); 2057 kfree(removed[i]); 2058 removed[i] = NULL; 2059 } 2060 2061 /* Notify scsi mid layer of any added devices */ 2062 for (i = 0; i < nadded; i++) { 2063 int rc = 0; 2064 2065 if (added[i] == NULL) 2066 continue; 2067 if (!(added[i]->expose_device)) 2068 continue; 2069 rc = hpsa_add_device(h, added[i]); 2070 if (!rc) 2071 continue; 2072 dev_warn(&h->pdev->dev, 2073 "addition failed %d, device not added.", rc); 2074 /* now we have to remove it from h->dev, 2075 * since it didn't get added to scsi mid layer 2076 */ 2077 fixup_botched_add(h, added[i]); 2078 h->drv_req_rescan = 1; 2079 } 2080 2081free_and_out: 2082 kfree(added); 2083 kfree(removed); 2084} 2085 2086/* 2087 * Lookup bus/target/lun and return corresponding struct hpsa_scsi_dev_t * 2088 * Assume's h->devlock is held. 2089 */ 2090static struct hpsa_scsi_dev_t *lookup_hpsa_scsi_dev(struct ctlr_info *h, 2091 int bus, int target, int lun) 2092{ 2093 int i; 2094 struct hpsa_scsi_dev_t *sd; 2095 2096 for (i = 0; i < h->ndevices; i++) { 2097 sd = h->dev[i]; 2098 if (sd->bus == bus && sd->target == target && sd->lun == lun) 2099 return sd; 2100 } 2101 return NULL; 2102} 2103 2104static int hpsa_slave_alloc(struct scsi_device *sdev) 2105{ 2106 struct hpsa_scsi_dev_t *sd = NULL; 2107 unsigned long flags; 2108 struct ctlr_info *h; 2109 2110 h = sdev_to_hba(sdev); 2111 spin_lock_irqsave(&h->devlock, flags); 2112 if (sdev_channel(sdev) == HPSA_PHYSICAL_DEVICE_BUS) { 2113 struct scsi_target *starget; 2114 struct sas_rphy *rphy; 2115 2116 starget = scsi_target(sdev); 2117 rphy = target_to_rphy(starget); 2118 sd = hpsa_find_device_by_sas_rphy(h, rphy); 2119 if (sd) { 2120 sd->target = sdev_id(sdev); 2121 sd->lun = sdev->lun; 2122 } 2123 } 2124 if (!sd) 2125 sd = lookup_hpsa_scsi_dev(h, sdev_channel(sdev), 2126 sdev_id(sdev), sdev->lun); 2127 2128 if (sd && sd->expose_device) { 2129 atomic_set(&sd->ioaccel_cmds_out, 0); 2130 sdev->hostdata = sd; 2131 } else 2132 sdev->hostdata = NULL; 2133 spin_unlock_irqrestore(&h->devlock, flags); 2134 return 0; 2135} 2136 2137/* configure scsi device based on internal per-device structure */ 2138#define CTLR_TIMEOUT (120 * HZ) 2139static int hpsa_slave_configure(struct scsi_device *sdev) 2140{ 2141 struct hpsa_scsi_dev_t *sd; 2142 int queue_depth; 2143 2144 sd = sdev->hostdata; 2145 sdev->no_uld_attach = !sd || !sd->expose_device; 2146 2147 if (sd) { 2148 sd->was_removed = 0; 2149 queue_depth = sd->queue_depth != 0 ? 2150 sd->queue_depth : sdev->host->can_queue; 2151 if (sd->external) { 2152 queue_depth = EXTERNAL_QD; 2153 sdev->eh_timeout = HPSA_EH_PTRAID_TIMEOUT; 2154 blk_queue_rq_timeout(sdev->request_queue, 2155 HPSA_EH_PTRAID_TIMEOUT); 2156 } 2157 if (is_hba_lunid(sd->scsi3addr)) { 2158 sdev->eh_timeout = CTLR_TIMEOUT; 2159 blk_queue_rq_timeout(sdev->request_queue, CTLR_TIMEOUT); 2160 } 2161 } else { 2162 queue_depth = sdev->host->can_queue; 2163 } 2164 2165 scsi_change_queue_depth(sdev, queue_depth); 2166 2167 return 0; 2168} 2169 2170static void hpsa_slave_destroy(struct scsi_device *sdev) 2171{ 2172 struct hpsa_scsi_dev_t *hdev = NULL; 2173 2174 hdev = sdev->hostdata; 2175 2176 if (hdev) 2177 hdev->was_removed = 1; 2178} 2179 2180static void hpsa_free_ioaccel2_sg_chain_blocks(struct ctlr_info *h) 2181{ 2182 int i; 2183 2184 if (!h->ioaccel2_cmd_sg_list) 2185 return; 2186 for (i = 0; i < h->nr_cmds; i++) { 2187 kfree(h->ioaccel2_cmd_sg_list[i]); 2188 h->ioaccel2_cmd_sg_list[i] = NULL; 2189 } 2190 kfree(h->ioaccel2_cmd_sg_list); 2191 h->ioaccel2_cmd_sg_list = NULL; 2192} 2193 2194static int hpsa_allocate_ioaccel2_sg_chain_blocks(struct ctlr_info *h) 2195{ 2196 int i; 2197 2198 if (h->chainsize <= 0) 2199 return 0; 2200 2201 h->ioaccel2_cmd_sg_list = 2202 kcalloc(h->nr_cmds, sizeof(*h->ioaccel2_cmd_sg_list), 2203 GFP_KERNEL); 2204 if (!h->ioaccel2_cmd_sg_list) 2205 return -ENOMEM; 2206 for (i = 0; i < h->nr_cmds; i++) { 2207 h->ioaccel2_cmd_sg_list[i] = 2208 kmalloc_array(h->maxsgentries, 2209 sizeof(*h->ioaccel2_cmd_sg_list[i]), 2210 GFP_KERNEL); 2211 if (!h->ioaccel2_cmd_sg_list[i]) 2212 goto clean; 2213 } 2214 return 0; 2215 2216clean: 2217 hpsa_free_ioaccel2_sg_chain_blocks(h); 2218 return -ENOMEM; 2219} 2220 2221static void hpsa_free_sg_chain_blocks(struct ctlr_info *h) 2222{ 2223 int i; 2224 2225 if (!h->cmd_sg_list) 2226 return; 2227 for (i = 0; i < h->nr_cmds; i++) { 2228 kfree(h->cmd_sg_list[i]); 2229 h->cmd_sg_list[i] = NULL; 2230 } 2231 kfree(h->cmd_sg_list); 2232 h->cmd_sg_list = NULL; 2233} 2234 2235static int hpsa_alloc_sg_chain_blocks(struct ctlr_info *h) 2236{ 2237 int i; 2238 2239 if (h->chainsize <= 0) 2240 return 0; 2241 2242 h->cmd_sg_list = kcalloc(h->nr_cmds, sizeof(*h->cmd_sg_list), 2243 GFP_KERNEL); 2244 if (!h->cmd_sg_list) 2245 return -ENOMEM; 2246 2247 for (i = 0; i < h->nr_cmds; i++) { 2248 h->cmd_sg_list[i] = kmalloc_array(h->chainsize, 2249 sizeof(*h->cmd_sg_list[i]), 2250 GFP_KERNEL); 2251 if (!h->cmd_sg_list[i]) 2252 goto clean; 2253 2254 } 2255 return 0; 2256 2257clean: 2258 hpsa_free_sg_chain_blocks(h); 2259 return -ENOMEM; 2260} 2261 2262static int hpsa_map_ioaccel2_sg_chain_block(struct ctlr_info *h, 2263 struct io_accel2_cmd *cp, struct CommandList *c) 2264{ 2265 struct ioaccel2_sg_element *chain_block; 2266 u64 temp64; 2267 u32 chain_size; 2268 2269 chain_block = h->ioaccel2_cmd_sg_list[c->cmdindex]; 2270 chain_size = le32_to_cpu(cp->sg[0].length); 2271 temp64 = dma_map_single(&h->pdev->dev, chain_block, chain_size, 2272 DMA_TO_DEVICE); 2273 if (dma_mapping_error(&h->pdev->dev, temp64)) { 2274 /* prevent subsequent unmapping */ 2275 cp->sg->address = 0; 2276 return -1; 2277 } 2278 cp->sg->address = cpu_to_le64(temp64); 2279 return 0; 2280} 2281 2282static void hpsa_unmap_ioaccel2_sg_chain_block(struct ctlr_info *h, 2283 struct io_accel2_cmd *cp) 2284{ 2285 struct ioaccel2_sg_element *chain_sg; 2286 u64 temp64; 2287 u32 chain_size; 2288 2289 chain_sg = cp->sg; 2290 temp64 = le64_to_cpu(chain_sg->address); 2291 chain_size = le32_to_cpu(cp->sg[0].length); 2292 dma_unmap_single(&h->pdev->dev, temp64, chain_size, DMA_TO_DEVICE); 2293} 2294 2295static int hpsa_map_sg_chain_block(struct ctlr_info *h, 2296 struct CommandList *c) 2297{ 2298 struct SGDescriptor *chain_sg, *chain_block; 2299 u64 temp64; 2300 u32 chain_len; 2301 2302 chain_sg = &c->SG[h->max_cmd_sg_entries - 1]; 2303 chain_block = h->cmd_sg_list[c->cmdindex]; 2304 chain_sg->Ext = cpu_to_le32(HPSA_SG_CHAIN); 2305 chain_len = sizeof(*chain_sg) * 2306 (le16_to_cpu(c->Header.SGTotal) - h->max_cmd_sg_entries); 2307 chain_sg->Len = cpu_to_le32(chain_len); 2308 temp64 = dma_map_single(&h->pdev->dev, chain_block, chain_len, 2309 DMA_TO_DEVICE); 2310 if (dma_mapping_error(&h->pdev->dev, temp64)) { 2311 /* prevent subsequent unmapping */ 2312 chain_sg->Addr = cpu_to_le64(0); 2313 return -1; 2314 } 2315 chain_sg->Addr = cpu_to_le64(temp64); 2316 return 0; 2317} 2318 2319static void hpsa_unmap_sg_chain_block(struct ctlr_info *h, 2320 struct CommandList *c) 2321{ 2322 struct SGDescriptor *chain_sg; 2323 2324 if (le16_to_cpu(c->Header.SGTotal) <= h->max_cmd_sg_entries) 2325 return; 2326 2327 chain_sg = &c->SG[h->max_cmd_sg_entries - 1]; 2328 dma_unmap_single(&h->pdev->dev, le64_to_cpu(chain_sg->Addr), 2329 le32_to_cpu(chain_sg->Len), DMA_TO_DEVICE); 2330} 2331 2332 2333/* Decode the various types of errors on ioaccel2 path. 2334 * Return 1 for any error that should generate a RAID path retry. 2335 * Return 0 for errors that don't require a RAID path retry. 2336 */ 2337static int handle_ioaccel_mode2_error(struct ctlr_info *h, 2338 struct CommandList *c, 2339 struct scsi_cmnd *cmd, 2340 struct io_accel2_cmd *c2, 2341 struct hpsa_scsi_dev_t *dev) 2342{ 2343 int data_len; 2344 int retry = 0; 2345 u32 ioaccel2_resid = 0; 2346 2347 switch (c2->error_data.serv_response) { 2348 case IOACCEL2_SERV_RESPONSE_COMPLETE: 2349 switch (c2->error_data.status) { 2350 case IOACCEL2_STATUS_SR_TASK_COMP_GOOD: 2351 if (cmd) 2352 cmd->result = 0; 2353 break; 2354 case IOACCEL2_STATUS_SR_TASK_COMP_CHK_COND: 2355 cmd->result |= SAM_STAT_CHECK_CONDITION; 2356 if (c2->error_data.data_present != 2357 IOACCEL2_SENSE_DATA_PRESENT) { 2358 memset(cmd->sense_buffer, 0, 2359 SCSI_SENSE_BUFFERSIZE); 2360 break; 2361 } 2362 /* copy the sense data */ 2363 data_len = c2->error_data.sense_data_len; 2364 if (data_len > SCSI_SENSE_BUFFERSIZE) 2365 data_len = SCSI_SENSE_BUFFERSIZE; 2366 if (data_len > sizeof(c2->error_data.sense_data_buff)) 2367 data_len = 2368 sizeof(c2->error_data.sense_data_buff); 2369 memcpy(cmd->sense_buffer, 2370 c2->error_data.sense_data_buff, data_len); 2371 retry = 1; 2372 break; 2373 case IOACCEL2_STATUS_SR_TASK_COMP_BUSY: 2374 retry = 1; 2375 break; 2376 case IOACCEL2_STATUS_SR_TASK_COMP_RES_CON: 2377 retry = 1; 2378 break; 2379 case IOACCEL2_STATUS_SR_TASK_COMP_SET_FULL: 2380 retry = 1; 2381 break; 2382 case IOACCEL2_STATUS_SR_TASK_COMP_ABORTED: 2383 retry = 1; 2384 break; 2385 default: 2386 retry = 1; 2387 break; 2388 } 2389 break; 2390 case IOACCEL2_SERV_RESPONSE_FAILURE: 2391 switch (c2->error_data.status) { 2392 case IOACCEL2_STATUS_SR_IO_ERROR: 2393 case IOACCEL2_STATUS_SR_IO_ABORTED: 2394 case IOACCEL2_STATUS_SR_OVERRUN: 2395 retry = 1; 2396 break; 2397 case IOACCEL2_STATUS_SR_UNDERRUN: 2398 cmd->result = (DID_OK << 16); /* host byte */ 2399 cmd->result |= (COMMAND_COMPLETE << 8); /* msg byte */ 2400 ioaccel2_resid = get_unaligned_le32( 2401 &c2->error_data.resid_cnt[0]); 2402 scsi_set_resid(cmd, ioaccel2_resid); 2403 break; 2404 case IOACCEL2_STATUS_SR_NO_PATH_TO_DEVICE: 2405 case IOACCEL2_STATUS_SR_INVALID_DEVICE: 2406 case IOACCEL2_STATUS_SR_IOACCEL_DISABLED: 2407 /* 2408 * Did an HBA disk disappear? We will eventually 2409 * get a state change event from the controller but 2410 * in the meantime, we need to tell the OS that the 2411 * HBA disk is no longer there and stop I/O 2412 * from going down. This allows the potential re-insert 2413 * of the disk to get the same device node. 2414 */ 2415 if (dev->physical_device && dev->expose_device) { 2416 cmd->result = DID_NO_CONNECT << 16; 2417 dev->removed = 1; 2418 h->drv_req_rescan = 1; 2419 dev_warn(&h->pdev->dev, 2420 "%s: device is gone!\n", __func__); 2421 } else 2422 /* 2423 * Retry by sending down the RAID path. 2424 * We will get an event from ctlr to 2425 * trigger rescan regardless. 2426 */ 2427 retry = 1; 2428 break; 2429 default: 2430 retry = 1; 2431 } 2432 break; 2433 case IOACCEL2_SERV_RESPONSE_TMF_COMPLETE: 2434 break; 2435 case IOACCEL2_SERV_RESPONSE_TMF_SUCCESS: 2436 break; 2437 case IOACCEL2_SERV_RESPONSE_TMF_REJECTED: 2438 retry = 1; 2439 break; 2440 case IOACCEL2_SERV_RESPONSE_TMF_WRONG_LUN: 2441 break; 2442 default: 2443 retry = 1; 2444 break; 2445 } 2446 2447 if (dev->in_reset) 2448 retry = 0; 2449 2450 return retry; /* retry on raid path? */ 2451} 2452 2453static void hpsa_cmd_resolve_events(struct ctlr_info *h, 2454 struct CommandList *c) 2455{ 2456 struct hpsa_scsi_dev_t *dev = c->device; 2457 2458 /* 2459 * Reset c->scsi_cmd here so that the reset handler will know 2460 * this command has completed. Then, check to see if the handler is 2461 * waiting for this command, and, if so, wake it. 2462 */ 2463 c->scsi_cmd = SCSI_CMD_IDLE; 2464 mb(); /* Declare command idle before checking for pending events. */ 2465 if (dev) { 2466 atomic_dec(&dev->commands_outstanding); 2467 if (dev->in_reset && 2468 atomic_read(&dev->commands_outstanding) <= 0) 2469 wake_up_all(&h->event_sync_wait_queue); 2470 } 2471} 2472 2473static void hpsa_cmd_resolve_and_free(struct ctlr_info *h, 2474 struct CommandList *c) 2475{ 2476 hpsa_cmd_resolve_events(h, c); 2477 cmd_tagged_free(h, c); 2478} 2479 2480static void hpsa_cmd_free_and_done(struct ctlr_info *h, 2481 struct CommandList *c, struct scsi_cmnd *cmd) 2482{ 2483 hpsa_cmd_resolve_and_free(h, c); 2484 if (cmd && cmd->scsi_done) 2485 cmd->scsi_done(cmd); 2486} 2487 2488static void hpsa_retry_cmd(struct ctlr_info *h, struct CommandList *c) 2489{ 2490 INIT_WORK(&c->work, hpsa_command_resubmit_worker); 2491 queue_work_on(raw_smp_processor_id(), h->resubmit_wq, &c->work); 2492} 2493 2494static void process_ioaccel2_completion(struct ctlr_info *h, 2495 struct CommandList *c, struct scsi_cmnd *cmd, 2496 struct hpsa_scsi_dev_t *dev) 2497{ 2498 struct io_accel2_cmd *c2 = &h->ioaccel2_cmd_pool[c->cmdindex]; 2499 2500 /* check for good status */ 2501 if (likely(c2->error_data.serv_response == 0 && 2502 c2->error_data.status == 0)) { 2503 cmd->result = 0; 2504 return hpsa_cmd_free_and_done(h, c, cmd); 2505 } 2506 2507 /* 2508 * Any RAID offload error results in retry which will use 2509 * the normal I/O path so the controller can handle whatever is 2510 * wrong. 2511 */ 2512 if (is_logical_device(dev) && 2513 c2->error_data.serv_response == 2514 IOACCEL2_SERV_RESPONSE_FAILURE) { 2515 if (c2->error_data.status == 2516 IOACCEL2_STATUS_SR_IOACCEL_DISABLED) { 2517 hpsa_turn_off_ioaccel_for_device(dev); 2518 } 2519 2520 if (dev->in_reset) { 2521 cmd->result = DID_RESET << 16; 2522 return hpsa_cmd_free_and_done(h, c, cmd); 2523 } 2524 2525 return hpsa_retry_cmd(h, c); 2526 } 2527 2528 if (handle_ioaccel_mode2_error(h, c, cmd, c2, dev)) 2529 return hpsa_retry_cmd(h, c); 2530 2531 return hpsa_cmd_free_and_done(h, c, cmd); 2532} 2533 2534/* Returns 0 on success, < 0 otherwise. */ 2535static int hpsa_evaluate_tmf_status(struct ctlr_info *h, 2536 struct CommandList *cp) 2537{ 2538 u8 tmf_status = cp->err_info->ScsiStatus; 2539 2540 switch (tmf_status) { 2541 case CISS_TMF_COMPLETE: 2542 /* 2543 * CISS_TMF_COMPLETE never happens, instead, 2544 * ei->CommandStatus == 0 for this case. 2545 */ 2546 case CISS_TMF_SUCCESS: 2547 return 0; 2548 case CISS_TMF_INVALID_FRAME: 2549 case CISS_TMF_NOT_SUPPORTED: 2550 case CISS_TMF_FAILED: 2551 case CISS_TMF_WRONG_LUN: 2552 case CISS_TMF_OVERLAPPED_TAG: 2553 break; 2554 default: 2555 dev_warn(&h->pdev->dev, "Unknown TMF status: 0x%02x\n", 2556 tmf_status); 2557 break; 2558 } 2559 return -tmf_status; 2560} 2561 2562static void complete_scsi_command(struct CommandList *cp) 2563{ 2564 struct scsi_cmnd *cmd; 2565 struct ctlr_info *h; 2566 struct ErrorInfo *ei; 2567 struct hpsa_scsi_dev_t *dev; 2568 struct io_accel2_cmd *c2; 2569 2570 u8 sense_key; 2571 u8 asc; /* additional sense code */ 2572 u8 ascq; /* additional sense code qualifier */ 2573 unsigned long sense_data_size; 2574 2575 ei = cp->err_info; 2576 cmd = cp->scsi_cmd; 2577 h = cp->h; 2578 2579 if (!cmd->device) { 2580 cmd->result = DID_NO_CONNECT << 16; 2581 return hpsa_cmd_free_and_done(h, cp, cmd); 2582 } 2583 2584 dev = cmd->device->hostdata; 2585 if (!dev) { 2586 cmd->result = DID_NO_CONNECT << 16; 2587 return hpsa_cmd_free_and_done(h, cp, cmd); 2588 } 2589 c2 = &h->ioaccel2_cmd_pool[cp->cmdindex]; 2590 2591 scsi_dma_unmap(cmd); /* undo the DMA mappings */ 2592 if ((cp->cmd_type == CMD_SCSI) && 2593 (le16_to_cpu(cp->Header.SGTotal) > h->max_cmd_sg_entries)) 2594 hpsa_unmap_sg_chain_block(h, cp); 2595 2596 if ((cp->cmd_type == CMD_IOACCEL2) && 2597 (c2->sg[0].chain_indicator == IOACCEL2_CHAIN)) 2598 hpsa_unmap_ioaccel2_sg_chain_block(h, c2); 2599 2600 cmd->result = (DID_OK << 16); /* host byte */ 2601 cmd->result |= (COMMAND_COMPLETE << 8); /* msg byte */ 2602 2603 /* SCSI command has already been cleaned up in SML */ 2604 if (dev->was_removed) { 2605 hpsa_cmd_resolve_and_free(h, cp); 2606 return; 2607 } 2608 2609 if (cp->cmd_type == CMD_IOACCEL2 || cp->cmd_type == CMD_IOACCEL1) { 2610 if (dev->physical_device && dev->expose_device && 2611 dev->removed) { 2612 cmd->result = DID_NO_CONNECT << 16; 2613 return hpsa_cmd_free_and_done(h, cp, cmd); 2614 } 2615 if (likely(cp->phys_disk != NULL)) 2616 atomic_dec(&cp->phys_disk->ioaccel_cmds_out); 2617 } 2618 2619 /* 2620 * We check for lockup status here as it may be set for 2621 * CMD_SCSI, CMD_IOACCEL1 and CMD_IOACCEL2 commands by 2622 * fail_all_oustanding_cmds() 2623 */ 2624 if (unlikely(ei->CommandStatus == CMD_CTLR_LOCKUP)) { 2625 /* DID_NO_CONNECT will prevent a retry */ 2626 cmd->result = DID_NO_CONNECT << 16; 2627 return hpsa_cmd_free_and_done(h, cp, cmd); 2628 } 2629 2630 if (cp->cmd_type == CMD_IOACCEL2) 2631 return process_ioaccel2_completion(h, cp, cmd, dev); 2632 2633 scsi_set_resid(cmd, ei->ResidualCnt); 2634 if (ei->CommandStatus == 0) 2635 return hpsa_cmd_free_and_done(h, cp, cmd); 2636 2637 /* For I/O accelerator commands, copy over some fields to the normal 2638 * CISS header used below for error handling. 2639 */ 2640 if (cp->cmd_type == CMD_IOACCEL1) { 2641 struct io_accel1_cmd *c = &h->ioaccel_cmd_pool[cp->cmdindex]; 2642 cp->Header.SGList = scsi_sg_count(cmd); 2643 cp->Header.SGTotal = cpu_to_le16(cp->Header.SGList); 2644 cp->Request.CDBLen = le16_to_cpu(c->io_flags) & 2645 IOACCEL1_IOFLAGS_CDBLEN_MASK; 2646 cp->Header.tag = c->tag; 2647 memcpy(cp->Header.LUN.LunAddrBytes, c->CISS_LUN, 8); 2648 memcpy(cp->Request.CDB, c->CDB, cp->Request.CDBLen); 2649 2650 /* Any RAID offload error results in retry which will use 2651 * the normal I/O path so the controller can handle whatever's 2652 * wrong. 2653 */ 2654 if (is_logical_device(dev)) { 2655 if (ei->CommandStatus == CMD_IOACCEL_DISABLED) 2656 dev->offload_enabled = 0; 2657 return hpsa_retry_cmd(h, cp); 2658 } 2659 } 2660 2661 /* an error has occurred */ 2662 switch (ei->CommandStatus) { 2663 2664 case CMD_TARGET_STATUS: 2665 cmd->result |= ei->ScsiStatus; 2666 /* copy the sense data */ 2667 if (SCSI_SENSE_BUFFERSIZE < sizeof(ei->SenseInfo)) 2668 sense_data_size = SCSI_SENSE_BUFFERSIZE; 2669 else 2670 sense_data_size = sizeof(ei->SenseInfo); 2671 if (ei->SenseLen < sense_data_size) 2672 sense_data_size = ei->SenseLen; 2673 memcpy(cmd->sense_buffer, ei->SenseInfo, sense_data_size); 2674 if (ei->ScsiStatus) 2675 decode_sense_data(ei->SenseInfo, sense_data_size, 2676 &sense_key, &asc, &ascq); 2677 if (ei->ScsiStatus == SAM_STAT_CHECK_CONDITION) { 2678 switch (sense_key) { 2679 case ABORTED_COMMAND: 2680 cmd->result |= DID_SOFT_ERROR << 16; 2681 break; 2682 case UNIT_ATTENTION: 2683 if (asc == 0x3F && ascq == 0x0E) 2684 h->drv_req_rescan = 1; 2685 break; 2686 case ILLEGAL_REQUEST: 2687 if (asc == 0x25 && ascq == 0x00) { 2688 dev->removed = 1; 2689 cmd->result = DID_NO_CONNECT << 16; 2690 } 2691 break; 2692 } 2693 break; 2694 } 2695 /* Problem was not a check condition 2696 * Pass it up to the upper layers... 2697 */ 2698 if (ei->ScsiStatus) { 2699 dev_warn(&h->pdev->dev, "cp %p has status 0x%x " 2700 "Sense: 0x%x, ASC: 0x%x, ASCQ: 0x%x, " 2701 "Returning result: 0x%x\n", 2702 cp, ei->ScsiStatus, 2703 sense_key, asc, ascq, 2704 cmd->result); 2705 } else { /* scsi status is zero??? How??? */ 2706 dev_warn(&h->pdev->dev, "cp %p SCSI status was 0. " 2707 "Returning no connection.\n", cp), 2708 2709 /* Ordinarily, this case should never happen, 2710 * but there is a bug in some released firmware 2711 * revisions that allows it to happen if, for 2712 * example, a 4100 backplane loses power and 2713 * the tape drive is in it. We assume that 2714 * it's a fatal error of some kind because we 2715 * can't show that it wasn't. We will make it 2716 * look like selection timeout since that is 2717 * the most common reason for this to occur, 2718 * and it's severe enough. 2719 */ 2720 2721 cmd->result = DID_NO_CONNECT << 16; 2722 } 2723 break; 2724 2725 case CMD_DATA_UNDERRUN: /* let mid layer handle it. */ 2726 break; 2727 case CMD_DATA_OVERRUN: 2728 dev_warn(&h->pdev->dev, 2729 "CDB %16phN data overrun\n", cp->Request.CDB); 2730 break; 2731 case CMD_INVALID: { 2732 /* print_bytes(cp, sizeof(*cp), 1, 0); 2733 print_cmd(cp); */ 2734 /* We get CMD_INVALID if you address a non-existent device 2735 * instead of a selection timeout (no response). You will 2736 * see this if you yank out a drive, then try to access it. 2737 * This is kind of a shame because it means that any other 2738 * CMD_INVALID (e.g. driver bug) will get interpreted as a 2739 * missing target. */ 2740 cmd->result = DID_NO_CONNECT << 16; 2741 } 2742 break; 2743 case CMD_PROTOCOL_ERR: 2744 cmd->result = DID_ERROR << 16; 2745 dev_warn(&h->pdev->dev, "CDB %16phN : protocol error\n", 2746 cp->Request.CDB); 2747 break; 2748 case CMD_HARDWARE_ERR: 2749 cmd->result = DID_ERROR << 16; 2750 dev_warn(&h->pdev->dev, "CDB %16phN : hardware error\n", 2751 cp->Request.CDB); 2752 break; 2753 case CMD_CONNECTION_LOST: 2754 cmd->result = DID_ERROR << 16; 2755 dev_warn(&h->pdev->dev, "CDB %16phN : connection lost\n", 2756 cp->Request.CDB); 2757 break; 2758 case CMD_ABORTED: 2759 cmd->result = DID_ABORT << 16; 2760 break; 2761 case CMD_ABORT_FAILED: 2762 cmd->result = DID_ERROR << 16; 2763 dev_warn(&h->pdev->dev, "CDB %16phN : abort failed\n", 2764 cp->Request.CDB); 2765 break; 2766 case CMD_UNSOLICITED_ABORT: 2767 cmd->result = DID_SOFT_ERROR << 16; /* retry the command */ 2768 dev_warn(&h->pdev->dev, "CDB %16phN : unsolicited abort\n", 2769 cp->Request.CDB); 2770 break; 2771 case CMD_TIMEOUT: 2772 cmd->result = DID_TIME_OUT << 16; 2773 dev_warn(&h->pdev->dev, "CDB %16phN timed out\n", 2774 cp->Request.CDB); 2775 break; 2776 case CMD_UNABORTABLE: 2777 cmd->result = DID_ERROR << 16; 2778 dev_warn(&h->pdev->dev, "Command unabortable\n"); 2779 break; 2780 case CMD_TMF_STATUS: 2781 if (hpsa_evaluate_tmf_status(h, cp)) /* TMF failed? */ 2782 cmd->result = DID_ERROR << 16; 2783 break; 2784 case CMD_IOACCEL_DISABLED: 2785 /* This only handles the direct pass-through case since RAID 2786 * offload is handled above. Just attempt a retry. 2787 */ 2788 cmd->result = DID_SOFT_ERROR << 16; 2789 dev_warn(&h->pdev->dev, 2790 "cp %p had HP SSD Smart Path error\n", cp); 2791 break; 2792 default: 2793 cmd->result = DID_ERROR << 16; 2794 dev_warn(&h->pdev->dev, "cp %p returned unknown status %x\n", 2795 cp, ei->CommandStatus); 2796 } 2797 2798 return hpsa_cmd_free_and_done(h, cp, cmd); 2799} 2800 2801static void hpsa_pci_unmap(struct pci_dev *pdev, struct CommandList *c, 2802 int sg_used, enum dma_data_direction data_direction) 2803{ 2804 int i; 2805 2806 for (i = 0; i < sg_used; i++) 2807 dma_unmap_single(&pdev->dev, le64_to_cpu(c->SG[i].Addr), 2808 le32_to_cpu(c->SG[i].Len), 2809 data_direction); 2810} 2811 2812static int hpsa_map_one(struct pci_dev *pdev, 2813 struct CommandList *cp, 2814 unsigned char *buf, 2815 size_t buflen, 2816 enum dma_data_direction data_direction) 2817{ 2818 u64 addr64; 2819 2820 if (buflen == 0 || data_direction == DMA_NONE) { 2821 cp->Header.SGList = 0; 2822 cp->Header.SGTotal = cpu_to_le16(0); 2823 return 0; 2824 } 2825 2826 addr64 = dma_map_single(&pdev->dev, buf, buflen, data_direction); 2827 if (dma_mapping_error(&pdev->dev, addr64)) { 2828 /* Prevent subsequent unmap of something never mapped */ 2829 cp->Header.SGList = 0; 2830 cp->Header.SGTotal = cpu_to_le16(0); 2831 return -1; 2832 } 2833 cp->SG[0].Addr = cpu_to_le64(addr64); 2834 cp->SG[0].Len = cpu_to_le32(buflen); 2835 cp->SG[0].Ext = cpu_to_le32(HPSA_SG_LAST); /* we are not chaining */ 2836 cp->Header.SGList = 1; /* no. SGs contig in this cmd */ 2837 cp->Header.SGTotal = cpu_to_le16(1); /* total sgs in cmd list */ 2838 return 0; 2839} 2840 2841#define NO_TIMEOUT ((unsigned long) -1) 2842#define DEFAULT_TIMEOUT 30000 /* milliseconds */ 2843static int hpsa_scsi_do_simple_cmd_core(struct ctlr_info *h, 2844 struct CommandList *c, int reply_queue, unsigned long timeout_msecs) 2845{ 2846 DECLARE_COMPLETION_ONSTACK(wait); 2847 2848 c->waiting = &wait; 2849 __enqueue_cmd_and_start_io(h, c, reply_queue); 2850 if (timeout_msecs == NO_TIMEOUT) { 2851 /* TODO: get rid of this no-timeout thing */ 2852 wait_for_completion_io(&wait); 2853 return IO_OK; 2854 } 2855 if (!wait_for_completion_io_timeout(&wait, 2856 msecs_to_jiffies(timeout_msecs))) { 2857 dev_warn(&h->pdev->dev, "Command timed out.\n"); 2858 return -ETIMEDOUT; 2859 } 2860 return IO_OK; 2861} 2862 2863static int hpsa_scsi_do_simple_cmd(struct ctlr_info *h, struct CommandList *c, 2864 int reply_queue, unsigned long timeout_msecs) 2865{ 2866 if (unlikely(lockup_detected(h))) { 2867 c->err_info->CommandStatus = CMD_CTLR_LOCKUP; 2868 return IO_OK; 2869 } 2870 return hpsa_scsi_do_simple_cmd_core(h, c, reply_queue, timeout_msecs); 2871} 2872 2873static u32 lockup_detected(struct ctlr_info *h) 2874{ 2875 int cpu; 2876 u32 rc, *lockup_detected; 2877 2878 cpu = get_cpu(); 2879 lockup_detected = per_cpu_ptr(h->lockup_detected, cpu); 2880 rc = *lockup_detected; 2881 put_cpu(); 2882 return rc; 2883} 2884 2885#define MAX_DRIVER_CMD_RETRIES 25 2886static int hpsa_scsi_do_simple_cmd_with_retry(struct ctlr_info *h, 2887 struct CommandList *c, enum dma_data_direction data_direction, 2888 unsigned long timeout_msecs) 2889{ 2890 int backoff_time = 10, retry_count = 0; 2891 int rc; 2892 2893 do { 2894 memset(c->err_info, 0, sizeof(*c->err_info)); 2895 rc = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE, 2896 timeout_msecs); 2897 if (rc) 2898 break; 2899 retry_count++; 2900 if (retry_count > 3) { 2901 msleep(backoff_time); 2902 if (backoff_time < 1000) 2903 backoff_time *= 2; 2904 } 2905 } while ((check_for_unit_attention(h, c) || 2906 check_for_busy(h, c)) && 2907 retry_count <= MAX_DRIVER_CMD_RETRIES); 2908 hpsa_pci_unmap(h->pdev, c, 1, data_direction); 2909 if (retry_count > MAX_DRIVER_CMD_RETRIES) 2910 rc = -EIO; 2911 return rc; 2912} 2913 2914static void hpsa_print_cmd(struct ctlr_info *h, char *txt, 2915 struct CommandList *c) 2916{ 2917 const u8 *cdb = c->Request.CDB; 2918 const u8 *lun = c->Header.LUN.LunAddrBytes; 2919 2920 dev_warn(&h->pdev->dev, "%s: LUN:%8phN CDB:%16phN\n", 2921 txt, lun, cdb); 2922} 2923 2924static void hpsa_scsi_interpret_error(struct ctlr_info *h, 2925 struct CommandList *cp) 2926{ 2927 const struct ErrorInfo *ei = cp->err_info; 2928 struct device *d = &cp->h->pdev->dev; 2929 u8 sense_key, asc, ascq; 2930 int sense_len; 2931 2932 switch (ei->CommandStatus) { 2933 case CMD_TARGET_STATUS: 2934 if (ei->SenseLen > sizeof(ei->SenseInfo)) 2935 sense_len = sizeof(ei->SenseInfo); 2936 else 2937 sense_len = ei->SenseLen; 2938 decode_sense_data(ei->SenseInfo, sense_len, 2939 &sense_key, &asc, &ascq); 2940 hpsa_print_cmd(h, "SCSI status", cp); 2941 if (ei->ScsiStatus == SAM_STAT_CHECK_CONDITION) 2942 dev_warn(d, "SCSI Status = 02, Sense key = 0x%02x, ASC = 0x%02x, ASCQ = 0x%02x\n", 2943 sense_key, asc, ascq); 2944 else 2945 dev_warn(d, "SCSI Status = 0x%02x\n", ei->ScsiStatus); 2946 if (ei->ScsiStatus == 0) 2947 dev_warn(d, "SCSI status is abnormally zero. " 2948 "(probably indicates selection timeout " 2949 "reported incorrectly due to a known " 2950 "firmware bug, circa July, 2001.)\n"); 2951 break; 2952 case CMD_DATA_UNDERRUN: /* let mid layer handle it. */ 2953 break; 2954 case CMD_DATA_OVERRUN: 2955 hpsa_print_cmd(h, "overrun condition", cp); 2956 break; 2957 case CMD_INVALID: { 2958 /* controller unfortunately reports SCSI passthru's 2959 * to non-existent targets as invalid commands. 2960 */ 2961 hpsa_print_cmd(h, "invalid command", cp); 2962 dev_warn(d, "probably means device no longer present\n"); 2963 } 2964 break; 2965 case CMD_PROTOCOL_ERR: 2966 hpsa_print_cmd(h, "protocol error", cp); 2967 break; 2968 case CMD_HARDWARE_ERR: 2969 hpsa_print_cmd(h, "hardware error", cp); 2970 break; 2971 case CMD_CONNECTION_LOST: 2972 hpsa_print_cmd(h, "connection lost", cp); 2973 break; 2974 case CMD_ABORTED: 2975 hpsa_print_cmd(h, "aborted", cp); 2976 break; 2977 case CMD_ABORT_FAILED: 2978 hpsa_print_cmd(h, "abort failed", cp); 2979 break; 2980 case CMD_UNSOLICITED_ABORT: 2981 hpsa_print_cmd(h, "unsolicited abort", cp); 2982 break; 2983 case CMD_TIMEOUT: 2984 hpsa_print_cmd(h, "timed out", cp); 2985 break; 2986 case CMD_UNABORTABLE: 2987 hpsa_print_cmd(h, "unabortable", cp); 2988 break; 2989 case CMD_CTLR_LOCKUP: 2990 hpsa_print_cmd(h, "controller lockup detected", cp); 2991 break; 2992 default: 2993 hpsa_print_cmd(h, "unknown status", cp); 2994 dev_warn(d, "Unknown command status %x\n", 2995 ei->CommandStatus); 2996 } 2997} 2998 2999static int hpsa_do_receive_diagnostic(struct ctlr_info *h, u8 *scsi3addr, 3000 u8 page, u8 *buf, size_t bufsize) 3001{ 3002 int rc = IO_OK; 3003 struct CommandList *c; 3004 struct ErrorInfo *ei; 3005 3006 c = cmd_alloc(h); 3007 if (fill_cmd(c, RECEIVE_DIAGNOSTIC, h, buf, bufsize, 3008 page, scsi3addr, TYPE_CMD)) { 3009 rc = -1; 3010 goto out; 3011 } 3012 rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE, 3013 NO_TIMEOUT); 3014 if (rc) 3015 goto out; 3016 ei = c->err_info; 3017 if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) { 3018 hpsa_scsi_interpret_error(h, c); 3019 rc = -1; 3020 } 3021out: 3022 cmd_free(h, c); 3023 return rc; 3024} 3025 3026static u64 hpsa_get_enclosure_logical_identifier(struct ctlr_info *h, 3027 u8 *scsi3addr) 3028{ 3029 u8 *buf; 3030 u64 sa = 0; 3031 int rc = 0; 3032 3033 buf = kzalloc(1024, GFP_KERNEL); 3034 if (!buf) 3035 return 0; 3036 3037 rc = hpsa_do_receive_diagnostic(h, scsi3addr, RECEIVE_DIAGNOSTIC, 3038 buf, 1024); 3039 3040 if (rc) 3041 goto out; 3042 3043 sa = get_unaligned_be64(buf+12); 3044 3045out: 3046 kfree(buf); 3047 return sa; 3048} 3049 3050static int hpsa_scsi_do_inquiry(struct ctlr_info *h, unsigned char *scsi3addr, 3051 u16 page, unsigned char *buf, 3052 unsigned char bufsize) 3053{ 3054 int rc = IO_OK; 3055 struct CommandList *c; 3056 struct ErrorInfo *ei; 3057 3058 c = cmd_alloc(h); 3059 3060 if (fill_cmd(c, HPSA_INQUIRY, h, buf, bufsize, 3061 page, scsi3addr, TYPE_CMD)) { 3062 rc = -1; 3063 goto out; 3064 } 3065 rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE, 3066 NO_TIMEOUT); 3067 if (rc) 3068 goto out; 3069 ei = c->err_info; 3070 if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) { 3071 hpsa_scsi_interpret_error(h, c); 3072 rc = -1; 3073 } 3074out: 3075 cmd_free(h, c); 3076 return rc; 3077} 3078 3079static int hpsa_send_reset(struct ctlr_info *h, struct hpsa_scsi_dev_t *dev, 3080 u8 reset_type, int reply_queue) 3081{ 3082 int rc = IO_OK; 3083 struct CommandList *c; 3084 struct ErrorInfo *ei; 3085 3086 c = cmd_alloc(h); 3087 c->device = dev; 3088 3089 /* fill_cmd can't fail here, no data buffer to map. */ 3090 (void) fill_cmd(c, reset_type, h, NULL, 0, 0, dev->scsi3addr, TYPE_MSG); 3091 rc = hpsa_scsi_do_simple_cmd(h, c, reply_queue, NO_TIMEOUT); 3092 if (rc) { 3093 dev_warn(&h->pdev->dev, "Failed to send reset command\n"); 3094 goto out; 3095 } 3096 /* no unmap needed here because no data xfer. */ 3097 3098 ei = c->err_info; 3099 if (ei->CommandStatus != 0) { 3100 hpsa_scsi_interpret_error(h, c); 3101 rc = -1; 3102 } 3103out: 3104 cmd_free(h, c); 3105 return rc; 3106} 3107 3108static bool hpsa_cmd_dev_match(struct ctlr_info *h, struct CommandList *c, 3109 struct hpsa_scsi_dev_t *dev, 3110 unsigned char *scsi3addr) 3111{ 3112 int i; 3113 bool match = false; 3114 struct io_accel2_cmd *c2 = &h->ioaccel2_cmd_pool[c->cmdindex]; 3115 struct hpsa_tmf_struct *ac = (struct hpsa_tmf_struct *) c2; 3116 3117 if (hpsa_is_cmd_idle(c)) 3118 return false; 3119 3120 switch (c->cmd_type) { 3121 case CMD_SCSI: 3122 case CMD_IOCTL_PEND: 3123 match = !memcmp(scsi3addr, &c->Header.LUN.LunAddrBytes, 3124 sizeof(c->Header.LUN.LunAddrBytes)); 3125 break; 3126 3127 case CMD_IOACCEL1: 3128 case CMD_IOACCEL2: 3129 if (c->phys_disk == dev) { 3130 /* HBA mode match */ 3131 match = true; 3132 } else { 3133 /* Possible RAID mode -- check each phys dev. */ 3134 /* FIXME: Do we need to take out a lock here? If 3135 * so, we could just call hpsa_get_pdisk_of_ioaccel2() 3136 * instead. */ 3137 for (i = 0; i < dev->nphysical_disks && !match; i++) { 3138 /* FIXME: an alternate test might be 3139 * 3140 * match = dev->phys_disk[i]->ioaccel_handle 3141 * == c2->scsi_nexus; */ 3142 match = dev->phys_disk[i] == c->phys_disk; 3143 } 3144 } 3145 break; 3146 3147 case IOACCEL2_TMF: 3148 for (i = 0; i < dev->nphysical_disks && !match; i++) { 3149 match = dev->phys_disk[i]->ioaccel_handle == 3150 le32_to_cpu(ac->it_nexus); 3151 } 3152 break; 3153 3154 case 0: /* The command is in the middle of being initialized. */ 3155 match = false; 3156 break; 3157 3158 default: 3159 dev_err(&h->pdev->dev, "unexpected cmd_type: %d\n", 3160 c->cmd_type); 3161 BUG(); 3162 } 3163 3164 return match; 3165} 3166 3167static int hpsa_do_reset(struct ctlr_info *h, struct hpsa_scsi_dev_t *dev, 3168 u8 reset_type, int reply_queue) 3169{ 3170 int rc = 0; 3171 3172 /* We can really only handle one reset at a time */ 3173 if (mutex_lock_interruptible(&h->reset_mutex) == -EINTR) { 3174 dev_warn(&h->pdev->dev, "concurrent reset wait interrupted.\n"); 3175 return -EINTR; 3176 } 3177 3178 rc = hpsa_send_reset(h, dev, reset_type, reply_queue); 3179 if (!rc) { 3180 /* incremented by sending the reset request */ 3181 atomic_dec(&dev->commands_outstanding); 3182 wait_event(h->event_sync_wait_queue, 3183 atomic_read(&dev->commands_outstanding) <= 0 || 3184 lockup_detected(h)); 3185 } 3186 3187 if (unlikely(lockup_detected(h))) { 3188 dev_warn(&h->pdev->dev, 3189 "Controller lockup detected during reset wait\n"); 3190 rc = -ENODEV; 3191 } 3192 3193 if (!rc) 3194 rc = wait_for_device_to_become_ready(h, dev->scsi3addr, 0); 3195 3196 mutex_unlock(&h->reset_mutex); 3197 return rc; 3198} 3199 3200static void hpsa_get_raid_level(struct ctlr_info *h, 3201 unsigned char *scsi3addr, unsigned char *raid_level) 3202{ 3203 int rc; 3204 unsigned char *buf; 3205 3206 *raid_level = RAID_UNKNOWN; 3207 buf = kzalloc(64, GFP_KERNEL); 3208 if (!buf) 3209 return; 3210 3211 if (!hpsa_vpd_page_supported(h, scsi3addr, 3212 HPSA_VPD_LV_DEVICE_GEOMETRY)) 3213 goto exit; 3214 3215 rc = hpsa_scsi_do_inquiry(h, scsi3addr, VPD_PAGE | 3216 HPSA_VPD_LV_DEVICE_GEOMETRY, buf, 64); 3217 3218 if (rc == 0) 3219 *raid_level = buf[8]; 3220 if (*raid_level > RAID_UNKNOWN) 3221 *raid_level = RAID_UNKNOWN; 3222exit: 3223 kfree(buf); 3224 return; 3225} 3226 3227#define HPSA_MAP_DEBUG 3228#ifdef HPSA_MAP_DEBUG 3229static void hpsa_debug_map_buff(struct ctlr_info *h, int rc, 3230 struct raid_map_data *map_buff) 3231{ 3232 struct raid_map_disk_data *dd = &map_buff->data[0]; 3233 int map, row, col; 3234 u16 map_cnt, row_cnt, disks_per_row; 3235 3236 if (rc != 0) 3237 return; 3238 3239 /* Show details only if debugging has been activated. */ 3240 if (h->raid_offload_debug < 2) 3241 return; 3242 3243 dev_info(&h->pdev->dev, "structure_size = %u\n", 3244 le32_to_cpu(map_buff->structure_size)); 3245 dev_info(&h->pdev->dev, "volume_blk_size = %u\n", 3246 le32_to_cpu(map_buff->volume_blk_size)); 3247 dev_info(&h->pdev->dev, "volume_blk_cnt = 0x%llx\n", 3248 le64_to_cpu(map_buff->volume_blk_cnt)); 3249 dev_info(&h->pdev->dev, "physicalBlockShift = %u\n", 3250 map_buff->phys_blk_shift); 3251 dev_info(&h->pdev->dev, "parity_rotation_shift = %u\n", 3252 map_buff->parity_rotation_shift); 3253 dev_info(&h->pdev->dev, "strip_size = %u\n", 3254 le16_to_cpu(map_buff->strip_size)); 3255 dev_info(&h->pdev->dev, "disk_starting_blk = 0x%llx\n", 3256 le64_to_cpu(map_buff->disk_starting_blk)); 3257 dev_info(&h->pdev->dev, "disk_blk_cnt = 0x%llx\n", 3258 le64_to_cpu(map_buff->disk_blk_cnt)); 3259 dev_info(&h->pdev->dev, "data_disks_per_row = %u\n", 3260 le16_to_cpu(map_buff->data_disks_per_row)); 3261 dev_info(&h->pdev->dev, "metadata_disks_per_row = %u\n", 3262 le16_to_cpu(map_buff->metadata_disks_per_row)); 3263 dev_info(&h->pdev->dev, "row_cnt = %u\n", 3264 le16_to_cpu(map_buff->row_cnt)); 3265 dev_info(&h->pdev->dev, "layout_map_count = %u\n", 3266 le16_to_cpu(map_buff->layout_map_count)); 3267 dev_info(&h->pdev->dev, "flags = 0x%x\n", 3268 le16_to_cpu(map_buff->flags)); 3269 dev_info(&h->pdev->dev, "encryption = %s\n", 3270 le16_to_cpu(map_buff->flags) & 3271 RAID_MAP_FLAG_ENCRYPT_ON ? "ON" : "OFF"); 3272 dev_info(&h->pdev->dev, "dekindex = %u\n", 3273 le16_to_cpu(map_buff->dekindex)); 3274 map_cnt = le16_to_cpu(map_buff->layout_map_count); 3275 for (map = 0; map < map_cnt; map++) { 3276 dev_info(&h->pdev->dev, "Map%u:\n", map); 3277 row_cnt = le16_to_cpu(map_buff->row_cnt); 3278 for (row = 0; row < row_cnt; row++) { 3279 dev_info(&h->pdev->dev, " Row%u:\n", row); 3280 disks_per_row = 3281 le16_to_cpu(map_buff->data_disks_per_row); 3282 for (col = 0; col < disks_per_row; col++, dd++) 3283 dev_info(&h->pdev->dev, 3284 " D%02u: h=0x%04x xor=%u,%u\n", 3285 col, dd->ioaccel_handle, 3286 dd->xor_mult[0], dd->xor_mult[1]); 3287 disks_per_row = 3288 le16_to_cpu(map_buff->metadata_disks_per_row); 3289 for (col = 0; col < disks_per_row; col++, dd++) 3290 dev_info(&h->pdev->dev, 3291 " M%02u: h=0x%04x xor=%u,%u\n", 3292 col, dd->ioaccel_handle, 3293 dd->xor_mult[0], dd->xor_mult[1]); 3294 } 3295 } 3296} 3297#else 3298static void hpsa_debug_map_buff(__attribute__((unused)) struct ctlr_info *h, 3299 __attribute__((unused)) int rc, 3300 __attribute__((unused)) struct raid_map_data *map_buff) 3301{ 3302} 3303#endif 3304 3305static int hpsa_get_raid_map(struct ctlr_info *h, 3306 unsigned char *scsi3addr, struct hpsa_scsi_dev_t *this_device) 3307{ 3308 int rc = 0; 3309 struct CommandList *c; 3310 struct ErrorInfo *ei; 3311 3312 c = cmd_alloc(h); 3313 3314 if (fill_cmd(c, HPSA_GET_RAID_MAP, h, &this_device->raid_map, 3315 sizeof(this_device->raid_map), 0, 3316 scsi3addr, TYPE_CMD)) { 3317 dev_warn(&h->pdev->dev, "hpsa_get_raid_map fill_cmd failed\n"); 3318 cmd_free(h, c); 3319 return -1; 3320 } 3321 rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE, 3322 NO_TIMEOUT); 3323 if (rc) 3324 goto out; 3325 ei = c->err_info; 3326 if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) { 3327 hpsa_scsi_interpret_error(h, c); 3328 rc = -1; 3329 goto out; 3330 } 3331 cmd_free(h, c); 3332 3333 /* @todo in the future, dynamically allocate RAID map memory */ 3334 if (le32_to_cpu(this_device->raid_map.structure_size) > 3335 sizeof(this_device->raid_map)) { 3336 dev_warn(&h->pdev->dev, "RAID map size is too large!\n"); 3337 rc = -1; 3338 } 3339 hpsa_debug_map_buff(h, rc, &this_device->raid_map); 3340 return rc; 3341out: 3342 cmd_free(h, c); 3343 return rc; 3344} 3345 3346static int hpsa_bmic_sense_subsystem_information(struct ctlr_info *h, 3347 unsigned char scsi3addr[], u16 bmic_device_index, 3348 struct bmic_sense_subsystem_info *buf, size_t bufsize) 3349{ 3350 int rc = IO_OK; 3351 struct CommandList *c; 3352 struct ErrorInfo *ei; 3353 3354 c = cmd_alloc(h); 3355 3356 rc = fill_cmd(c, BMIC_SENSE_SUBSYSTEM_INFORMATION, h, buf, bufsize, 3357 0, RAID_CTLR_LUNID, TYPE_CMD); 3358 if (rc) 3359 goto out; 3360 3361 c->Request.CDB[2] = bmic_device_index & 0xff; 3362 c->Request.CDB[9] = (bmic_device_index >> 8) & 0xff; 3363 3364 rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE, 3365 NO_TIMEOUT); 3366 if (rc) 3367 goto out; 3368 ei = c->err_info; 3369 if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) { 3370 hpsa_scsi_interpret_error(h, c); 3371 rc = -1; 3372 } 3373out: 3374 cmd_free(h, c); 3375 return rc; 3376} 3377 3378static int hpsa_bmic_id_controller(struct ctlr_info *h, 3379 struct bmic_identify_controller *buf, size_t bufsize) 3380{ 3381 int rc = IO_OK; 3382 struct CommandList *c; 3383 struct ErrorInfo *ei; 3384 3385 c = cmd_alloc(h); 3386 3387 rc = fill_cmd(c, BMIC_IDENTIFY_CONTROLLER, h, buf, bufsize, 3388 0, RAID_CTLR_LUNID, TYPE_CMD); 3389 if (rc) 3390 goto out; 3391 3392 rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE, 3393 NO_TIMEOUT); 3394 if (rc) 3395 goto out; 3396 ei = c->err_info; 3397 if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) { 3398 hpsa_scsi_interpret_error(h, c); 3399 rc = -1; 3400 } 3401out: 3402 cmd_free(h, c); 3403 return rc; 3404} 3405 3406static int hpsa_bmic_id_physical_device(struct ctlr_info *h, 3407 unsigned char scsi3addr[], u16 bmic_device_index, 3408 struct bmic_identify_physical_device *buf, size_t bufsize) 3409{ 3410 int rc = IO_OK; 3411 struct CommandList *c; 3412 struct ErrorInfo *ei; 3413 3414 c = cmd_alloc(h); 3415 rc = fill_cmd(c, BMIC_IDENTIFY_PHYSICAL_DEVICE, h, buf, bufsize, 3416 0, RAID_CTLR_LUNID, TYPE_CMD); 3417 if (rc) 3418 goto out; 3419 3420 c->Request.CDB[2] = bmic_device_index & 0xff; 3421 c->Request.CDB[9] = (bmic_device_index >> 8) & 0xff; 3422 3423 hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE, 3424 NO_TIMEOUT); 3425 ei = c->err_info; 3426 if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) { 3427 hpsa_scsi_interpret_error(h, c); 3428 rc = -1; 3429 } 3430out: 3431 cmd_free(h, c); 3432 3433 return rc; 3434} 3435 3436/* 3437 * get enclosure information 3438 * struct ReportExtendedLUNdata *rlep - Used for BMIC drive number 3439 * struct hpsa_scsi_dev_t *encl_dev - device entry for enclosure 3440 * Uses id_physical_device to determine the box_index. 3441 */ 3442static void hpsa_get_enclosure_info(struct ctlr_info *h, 3443 unsigned char *scsi3addr, 3444 struct ReportExtendedLUNdata *rlep, int rle_index, 3445 struct hpsa_scsi_dev_t *encl_dev) 3446{ 3447 int rc = -1; 3448 struct CommandList *c = NULL; 3449 struct ErrorInfo *ei = NULL; 3450 struct bmic_sense_storage_box_params *bssbp = NULL; 3451 struct bmic_identify_physical_device *id_phys = NULL; 3452 struct ext_report_lun_entry *rle; 3453 u16 bmic_device_index = 0; 3454 3455 if (rle_index < 0 || rle_index >= HPSA_MAX_PHYS_LUN) 3456 return; 3457 3458 rle = &rlep->LUN[rle_index]; 3459 3460 encl_dev->eli = 3461 hpsa_get_enclosure_logical_identifier(h, scsi3addr); 3462 3463 bmic_device_index = GET_BMIC_DRIVE_NUMBER(&rle->lunid[0]); 3464 3465 if (encl_dev->target == -1 || encl_dev->lun == -1) { 3466 rc = IO_OK; 3467 goto out; 3468 } 3469 3470 if (bmic_device_index == 0xFF00 || MASKED_DEVICE(&rle->lunid[0])) { 3471 rc = IO_OK; 3472 goto out; 3473 } 3474 3475 bssbp = kzalloc(sizeof(*bssbp), GFP_KERNEL); 3476 if (!bssbp) 3477 goto out; 3478 3479 id_phys = kzalloc(sizeof(*id_phys), GFP_KERNEL); 3480 if (!id_phys) 3481 goto out; 3482 3483 rc = hpsa_bmic_id_physical_device(h, scsi3addr, bmic_device_index, 3484 id_phys, sizeof(*id_phys)); 3485 if (rc) { 3486 dev_warn(&h->pdev->dev, "%s: id_phys failed %d bdi[0x%x]\n", 3487 __func__, encl_dev->external, bmic_device_index); 3488 goto out; 3489 } 3490 3491 c = cmd_alloc(h); 3492 3493 rc = fill_cmd(c, BMIC_SENSE_STORAGE_BOX_PARAMS, h, bssbp, 3494 sizeof(*bssbp), 0, RAID_CTLR_LUNID, TYPE_CMD); 3495 3496 if (rc) 3497 goto out; 3498 3499 if (id_phys->phys_connector[1] == 'E') 3500 c->Request.CDB[5] = id_phys->box_index; 3501 else 3502 c->Request.CDB[5] = 0; 3503 3504 rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE, 3505 NO_TIMEOUT); 3506 if (rc) 3507 goto out; 3508 3509 ei = c->err_info; 3510 if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) { 3511 rc = -1; 3512 goto out; 3513 } 3514 3515 encl_dev->box[id_phys->active_path_number] = bssbp->phys_box_on_port; 3516 memcpy(&encl_dev->phys_connector[id_phys->active_path_number], 3517 bssbp->phys_connector, sizeof(bssbp->phys_connector)); 3518 3519 rc = IO_OK; 3520out: 3521 kfree(bssbp); 3522 kfree(id_phys); 3523 3524 if (c) 3525 cmd_free(h, c); 3526 3527 if (rc != IO_OK) 3528 hpsa_show_dev_msg(KERN_INFO, h, encl_dev, 3529 "Error, could not get enclosure information"); 3530} 3531 3532static u64 hpsa_get_sas_address_from_report_physical(struct ctlr_info *h, 3533 unsigned char *scsi3addr) 3534{ 3535 struct ReportExtendedLUNdata *physdev; 3536 u32 nphysicals; 3537 u64 sa = 0; 3538 int i; 3539 3540 physdev = kzalloc(sizeof(*physdev), GFP_KERNEL); 3541 if (!physdev) 3542 return 0; 3543 3544 if (hpsa_scsi_do_report_phys_luns(h, physdev, sizeof(*physdev))) { 3545 dev_err(&h->pdev->dev, "report physical LUNs failed.\n"); 3546 kfree(physdev); 3547 return 0; 3548 } 3549 nphysicals = get_unaligned_be32(physdev->LUNListLength) / 24; 3550 3551 for (i = 0; i < nphysicals; i++) 3552 if (!memcmp(&physdev->LUN[i].lunid[0], scsi3addr, 8)) { 3553 sa = get_unaligned_be64(&physdev->LUN[i].wwid[0]); 3554 break; 3555 } 3556 3557 kfree(physdev); 3558 3559 return sa; 3560} 3561 3562static void hpsa_get_sas_address(struct ctlr_info *h, unsigned char *scsi3addr, 3563 struct hpsa_scsi_dev_t *dev) 3564{ 3565 int rc; 3566 u64 sa = 0; 3567 3568 if (is_hba_lunid(scsi3addr)) { 3569 struct bmic_sense_subsystem_info *ssi; 3570 3571 ssi = kzalloc(sizeof(*ssi), GFP_KERNEL); 3572 if (!ssi) 3573 return; 3574 3575 rc = hpsa_bmic_sense_subsystem_information(h, 3576 scsi3addr, 0, ssi, sizeof(*ssi)); 3577 if (rc == 0) { 3578 sa = get_unaligned_be64(ssi->primary_world_wide_id); 3579 h->sas_address = sa; 3580 } 3581 3582 kfree(ssi); 3583 } else 3584 sa = hpsa_get_sas_address_from_report_physical(h, scsi3addr); 3585 3586 dev->sas_address = sa; 3587} 3588 3589static void hpsa_ext_ctrl_present(struct ctlr_info *h, 3590 struct ReportExtendedLUNdata *physdev) 3591{ 3592 u32 nphysicals; 3593 int i; 3594 3595 if (h->discovery_polling) 3596 return; 3597 3598 nphysicals = (get_unaligned_be32(physdev->LUNListLength) / 24) + 1; 3599 3600 for (i = 0; i < nphysicals; i++) { 3601 if (physdev->LUN[i].device_type == 3602 BMIC_DEVICE_TYPE_CONTROLLER 3603 && !is_hba_lunid(physdev->LUN[i].lunid)) { 3604 dev_info(&h->pdev->dev, 3605 "External controller present, activate discovery polling and disable rld caching\n"); 3606 hpsa_disable_rld_caching(h); 3607 h->discovery_polling = 1; 3608 break; 3609 } 3610 } 3611} 3612 3613/* Get a device id from inquiry page 0x83 */ 3614static bool hpsa_vpd_page_supported(struct ctlr_info *h, 3615 unsigned char scsi3addr[], u8 page) 3616{ 3617 int rc; 3618 int i; 3619 int pages; 3620 unsigned char *buf, bufsize; 3621 3622 buf = kzalloc(256, GFP_KERNEL); 3623 if (!buf) 3624 return false; 3625 3626 /* Get the size of the page list first */ 3627 rc = hpsa_scsi_do_inquiry(h, scsi3addr, 3628 VPD_PAGE | HPSA_VPD_SUPPORTED_PAGES, 3629 buf, HPSA_VPD_HEADER_SZ); 3630 if (rc != 0) 3631 goto exit_unsupported; 3632 pages = buf[3]; 3633 if ((pages + HPSA_VPD_HEADER_SZ) <= 255) 3634 bufsize = pages + HPSA_VPD_HEADER_SZ; 3635 else 3636 bufsize = 255; 3637 3638 /* Get the whole VPD page list */ 3639 rc = hpsa_scsi_do_inquiry(h, scsi3addr, 3640 VPD_PAGE | HPSA_VPD_SUPPORTED_PAGES, 3641 buf, bufsize); 3642 if (rc != 0) 3643 goto exit_unsupported; 3644 3645 pages = buf[3]; 3646 for (i = 1; i <= pages; i++) 3647 if (buf[3 + i] == page) 3648 goto exit_supported; 3649exit_unsupported: 3650 kfree(buf); 3651 return false; 3652exit_supported: 3653 kfree(buf); 3654 return true; 3655} 3656 3657/* 3658 * Called during a scan operation. 3659 * Sets ioaccel status on the new device list, not the existing device list 3660 * 3661 * The device list used during I/O will be updated later in 3662 * adjust_hpsa_scsi_table. 3663 */ 3664static void hpsa_get_ioaccel_status(struct ctlr_info *h, 3665 unsigned char *scsi3addr, struct hpsa_scsi_dev_t *this_device) 3666{ 3667 int rc; 3668 unsigned char *buf; 3669 u8 ioaccel_status; 3670 3671 this_device->offload_config = 0; 3672 this_device->offload_enabled = 0; 3673 this_device->offload_to_be_enabled = 0; 3674 3675 buf = kzalloc(64, GFP_KERNEL); 3676 if (!buf) 3677 return; 3678 if (!hpsa_vpd_page_supported(h, scsi3addr, HPSA_VPD_LV_IOACCEL_STATUS)) 3679 goto out; 3680 rc = hpsa_scsi_do_inquiry(h, scsi3addr, 3681 VPD_PAGE | HPSA_VPD_LV_IOACCEL_STATUS, buf, 64); 3682 if (rc != 0) 3683 goto out; 3684 3685#define IOACCEL_STATUS_BYTE 4 3686#define OFFLOAD_CONFIGURED_BIT 0x01 3687#define OFFLOAD_ENABLED_BIT 0x02 3688 ioaccel_status = buf[IOACCEL_STATUS_BYTE]; 3689 this_device->offload_config = 3690 !!(ioaccel_status & OFFLOAD_CONFIGURED_BIT); 3691 if (this_device->offload_config) { 3692 bool offload_enabled = 3693 !!(ioaccel_status & OFFLOAD_ENABLED_BIT); 3694 /* 3695 * Check to see if offload can be enabled. 3696 */ 3697 if (offload_enabled) { 3698 rc = hpsa_get_raid_map(h, scsi3addr, this_device); 3699 if (rc) /* could not load raid_map */ 3700 goto out; 3701 this_device->offload_to_be_enabled = 1; 3702 } 3703 } 3704 3705out: 3706 kfree(buf); 3707 return; 3708} 3709 3710/* Get the device id from inquiry page 0x83 */ 3711static int hpsa_get_device_id(struct ctlr_info *h, unsigned char *scsi3addr, 3712 unsigned char *device_id, int index, int buflen) 3713{ 3714 int rc; 3715 unsigned char *buf; 3716 3717 /* Does controller have VPD for device id? */ 3718 if (!hpsa_vpd_page_supported(h, scsi3addr, HPSA_VPD_LV_DEVICE_ID)) 3719 return 1; /* not supported */ 3720 3721 buf = kzalloc(64, GFP_KERNEL); 3722 if (!buf) 3723 return -ENOMEM; 3724 3725 rc = hpsa_scsi_do_inquiry(h, scsi3addr, VPD_PAGE | 3726 HPSA_VPD_LV_DEVICE_ID, buf, 64); 3727 if (rc == 0) { 3728 if (buflen > 16) 3729 buflen = 16; 3730 memcpy(device_id, &buf[8], buflen); 3731 } 3732 3733 kfree(buf); 3734 3735 return rc; /*0 - got id, otherwise, didn't */ 3736} 3737 3738static int hpsa_scsi_do_report_luns(struct ctlr_info *h, int logical, 3739 void *buf, int bufsize, 3740 int extended_response) 3741{ 3742 int rc = IO_OK; 3743 struct CommandList *c; 3744 unsigned char scsi3addr[8]; 3745 struct ErrorInfo *ei; 3746 3747 c = cmd_alloc(h); 3748 3749 /* address the controller */ 3750 memset(scsi3addr, 0, sizeof(scsi3addr)); 3751 if (fill_cmd(c, logical ? HPSA_REPORT_LOG : HPSA_REPORT_PHYS, h, 3752 buf, bufsize, 0, scsi3addr, TYPE_CMD)) { 3753 rc = -EAGAIN; 3754 goto out; 3755 } 3756 if (extended_response) 3757 c->Request.CDB[1] = extended_response; 3758 rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE, 3759 NO_TIMEOUT); 3760 if (rc) 3761 goto out; 3762 ei = c->err_info; 3763 if (ei->CommandStatus != 0 && 3764 ei->CommandStatus != CMD_DATA_UNDERRUN) { 3765 hpsa_scsi_interpret_error(h, c); 3766 rc = -EIO; 3767 } else { 3768 struct ReportLUNdata *rld = buf; 3769 3770 if (rld->extended_response_flag != extended_response) { 3771 if (!h->legacy_board) { 3772 dev_err(&h->pdev->dev, 3773 "report luns requested format %u, got %u\n", 3774 extended_response, 3775 rld->extended_response_flag); 3776 rc = -EINVAL; 3777 } else 3778 rc = -EOPNOTSUPP; 3779 } 3780 } 3781out: 3782 cmd_free(h, c); 3783 return rc; 3784} 3785 3786static inline int hpsa_scsi_do_report_phys_luns(struct ctlr_info *h, 3787 struct ReportExtendedLUNdata *buf, int bufsize) 3788{ 3789 int rc; 3790 struct ReportLUNdata *lbuf; 3791 3792 rc = hpsa_scsi_do_report_luns(h, 0, buf, bufsize, 3793 HPSA_REPORT_PHYS_EXTENDED); 3794 if (!rc || rc != -EOPNOTSUPP) 3795 return rc; 3796 3797 /* REPORT PHYS EXTENDED is not supported */ 3798 lbuf = kzalloc(sizeof(*lbuf), GFP_KERNEL); 3799 if (!lbuf) 3800 return -ENOMEM; 3801 3802 rc = hpsa_scsi_do_report_luns(h, 0, lbuf, sizeof(*lbuf), 0); 3803 if (!rc) { 3804 int i; 3805 u32 nphys; 3806 3807 /* Copy ReportLUNdata header */ 3808 memcpy(buf, lbuf, 8); 3809 nphys = be32_to_cpu(*((__be32 *)lbuf->LUNListLength)) / 8; 3810 for (i = 0; i < nphys; i++) 3811 memcpy(buf->LUN[i].lunid, lbuf->LUN[i], 8); 3812 } 3813 kfree(lbuf); 3814 return rc; 3815} 3816 3817static inline int hpsa_scsi_do_report_log_luns(struct ctlr_info *h, 3818 struct ReportLUNdata *buf, int bufsize) 3819{ 3820 return hpsa_scsi_do_report_luns(h, 1, buf, bufsize, 0); 3821} 3822 3823static inline void hpsa_set_bus_target_lun(struct hpsa_scsi_dev_t *device, 3824 int bus, int target, int lun) 3825{ 3826 device->bus = bus; 3827 device->target = target; 3828 device->lun = lun; 3829} 3830 3831/* Use VPD inquiry to get details of volume status */ 3832static int hpsa_get_volume_status(struct ctlr_info *h, 3833 unsigned char scsi3addr[]) 3834{ 3835 int rc; 3836 int status; 3837 int size; 3838 unsigned char *buf; 3839 3840 buf = kzalloc(64, GFP_KERNEL); 3841 if (!buf) 3842 return HPSA_VPD_LV_STATUS_UNSUPPORTED; 3843 3844 /* Does controller have VPD for logical volume status? */ 3845 if (!hpsa_vpd_page_supported(h, scsi3addr, HPSA_VPD_LV_STATUS)) 3846 goto exit_failed; 3847 3848 /* Get the size of the VPD return buffer */ 3849 rc = hpsa_scsi_do_inquiry(h, scsi3addr, VPD_PAGE | HPSA_VPD_LV_STATUS, 3850 buf, HPSA_VPD_HEADER_SZ); 3851 if (rc != 0) 3852 goto exit_failed; 3853 size = buf[3]; 3854 3855 /* Now get the whole VPD buffer */ 3856 rc = hpsa_scsi_do_inquiry(h, scsi3addr, VPD_PAGE | HPSA_VPD_LV_STATUS, 3857 buf, size + HPSA_VPD_HEADER_SZ); 3858 if (rc != 0) 3859 goto exit_failed; 3860 status = buf[4]; /* status byte */ 3861 3862 kfree(buf); 3863 return status; 3864exit_failed: 3865 kfree(buf); 3866 return HPSA_VPD_LV_STATUS_UNSUPPORTED; 3867} 3868 3869/* Determine offline status of a volume. 3870 * Return either: 3871 * 0 (not offline) 3872 * 0xff (offline for unknown reasons) 3873 * # (integer code indicating one of several NOT READY states 3874 * describing why a volume is to be kept offline) 3875 */ 3876static unsigned char hpsa_volume_offline(struct ctlr_info *h, 3877 unsigned char scsi3addr[]) 3878{ 3879 struct CommandList *c; 3880 unsigned char *sense; 3881 u8 sense_key, asc, ascq; 3882 int sense_len; 3883 int rc, ldstat = 0; 3884 u16 cmd_status; 3885 u8 scsi_status; 3886#define ASC_LUN_NOT_READY 0x04 3887#define ASCQ_LUN_NOT_READY_FORMAT_IN_PROGRESS 0x04 3888#define ASCQ_LUN_NOT_READY_INITIALIZING_CMD_REQ 0x02 3889 3890 c = cmd_alloc(h); 3891 3892 (void) fill_cmd(c, TEST_UNIT_READY, h, NULL, 0, 0, scsi3addr, TYPE_CMD); 3893 rc = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE, 3894 NO_TIMEOUT); 3895 if (rc) { 3896 cmd_free(h, c); 3897 return HPSA_VPD_LV_STATUS_UNSUPPORTED; 3898 } 3899 sense = c->err_info->SenseInfo; 3900 if (c->err_info->SenseLen > sizeof(c->err_info->SenseInfo)) 3901 sense_len = sizeof(c->err_info->SenseInfo); 3902 else 3903 sense_len = c->err_info->SenseLen; 3904 decode_sense_data(sense, sense_len, &sense_key, &asc, &ascq); 3905 cmd_status = c->err_info->CommandStatus; 3906 scsi_status = c->err_info->ScsiStatus; 3907 cmd_free(h, c); 3908 3909 /* Determine the reason for not ready state */ 3910 ldstat = hpsa_get_volume_status(h, scsi3addr); 3911 3912 /* Keep volume offline in certain cases: */ 3913 switch (ldstat) { 3914 case HPSA_LV_FAILED: 3915 case HPSA_LV_UNDERGOING_ERASE: 3916 case HPSA_LV_NOT_AVAILABLE: 3917 case HPSA_LV_UNDERGOING_RPI: 3918 case HPSA_LV_PENDING_RPI: 3919 case HPSA_LV_ENCRYPTED_NO_KEY: 3920 case HPSA_LV_PLAINTEXT_IN_ENCRYPT_ONLY_CONTROLLER: 3921 case HPSA_LV_UNDERGOING_ENCRYPTION: 3922 case HPSA_LV_UNDERGOING_ENCRYPTION_REKEYING: 3923 case HPSA_LV_ENCRYPTED_IN_NON_ENCRYPTED_CONTROLLER: 3924 return ldstat; 3925 case HPSA_VPD_LV_STATUS_UNSUPPORTED: 3926 /* If VPD status page isn't available, 3927 * use ASC/ASCQ to determine state 3928 */ 3929 if ((ascq == ASCQ_LUN_NOT_READY_FORMAT_IN_PROGRESS) || 3930 (ascq == ASCQ_LUN_NOT_READY_INITIALIZING_CMD_REQ)) 3931 return ldstat; 3932 break; 3933 default: 3934 break; 3935 } 3936 return HPSA_LV_OK; 3937} 3938 3939static int hpsa_update_device_info(struct ctlr_info *h, 3940 unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device, 3941 unsigned char *is_OBDR_device) 3942{ 3943 3944#define OBDR_SIG_OFFSET 43 3945#define OBDR_TAPE_SIG "$DR-10" 3946#define OBDR_SIG_LEN (sizeof(OBDR_TAPE_SIG) - 1) 3947#define OBDR_TAPE_INQ_SIZE (OBDR_SIG_OFFSET + OBDR_SIG_LEN) 3948 3949 unsigned char *inq_buff; 3950 unsigned char *obdr_sig; 3951 int rc = 0; 3952 3953 inq_buff = kzalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL); 3954 if (!inq_buff) { 3955 rc = -ENOMEM; 3956 goto bail_out; 3957 } 3958 3959 /* Do an inquiry to the device to see what it is. */ 3960 if (hpsa_scsi_do_inquiry(h, scsi3addr, 0, inq_buff, 3961 (unsigned char) OBDR_TAPE_INQ_SIZE) != 0) { 3962 dev_err(&h->pdev->dev, 3963 "%s: inquiry failed, device will be skipped.\n", 3964 __func__); 3965 rc = HPSA_INQUIRY_FAILED; 3966 goto bail_out; 3967 } 3968 3969 scsi_sanitize_inquiry_string(&inq_buff[8], 8); 3970 scsi_sanitize_inquiry_string(&inq_buff[16], 16); 3971 3972 this_device->devtype = (inq_buff[0] & 0x1f); 3973 memcpy(this_device->scsi3addr, scsi3addr, 8); 3974 memcpy(this_device->vendor, &inq_buff[8], 3975 sizeof(this_device->vendor)); 3976 memcpy(this_device->model, &inq_buff[16], 3977 sizeof(this_device->model)); 3978 this_device->rev = inq_buff[2]; 3979 memset(this_device->device_id, 0, 3980 sizeof(this_device->device_id)); 3981 if (hpsa_get_device_id(h, scsi3addr, this_device->device_id, 8, 3982 sizeof(this_device->device_id)) < 0) { 3983 dev_err(&h->pdev->dev, 3984 "hpsa%d: %s: can't get device id for [%d:%d:%d:%d]\t%s\t%.16s\n", 3985 h->ctlr, __func__, 3986 h->scsi_host->host_no, 3987 this_device->bus, this_device->target, 3988 this_device->lun, 3989 scsi_device_type(this_device->devtype), 3990 this_device->model); 3991 rc = HPSA_LV_FAILED; 3992 goto bail_out; 3993 } 3994 3995 if ((this_device->devtype == TYPE_DISK || 3996 this_device->devtype == TYPE_ZBC) && 3997 is_logical_dev_addr_mode(scsi3addr)) { 3998 unsigned char volume_offline; 3999 4000 hpsa_get_raid_level(h, scsi3addr, &this_device->raid_level); 4001 if (h->fw_support & MISC_FW_RAID_OFFLOAD_BASIC) 4002 hpsa_get_ioaccel_status(h, scsi3addr, this_device); 4003 volume_offline = hpsa_volume_offline(h, scsi3addr); 4004 if (volume_offline == HPSA_VPD_LV_STATUS_UNSUPPORTED && 4005 h->legacy_board) { 4006 /* 4007 * Legacy boards might not support volume status 4008 */ 4009 dev_info(&h->pdev->dev, 4010 "C0:T%d:L%d Volume status not available, assuming online.\n", 4011 this_device->target, this_device->lun); 4012 volume_offline = 0; 4013 } 4014 this_device->volume_offline = volume_offline; 4015 if (volume_offline == HPSA_LV_FAILED) { 4016 rc = HPSA_LV_FAILED; 4017 dev_err(&h->pdev->dev, 4018 "%s: LV failed, device will be skipped.\n", 4019 __func__); 4020 goto bail_out; 4021 } 4022 } else { 4023 this_device->raid_level = RAID_UNKNOWN; 4024 this_device->offload_config = 0; 4025 hpsa_turn_off_ioaccel_for_device(this_device); 4026 this_device->hba_ioaccel_enabled = 0; 4027 this_device->volume_offline = 0; 4028 this_device->queue_depth = h->nr_cmds; 4029 } 4030 4031 if (this_device->external) 4032 this_device->queue_depth = EXTERNAL_QD; 4033 4034 if (is_OBDR_device) { 4035 /* See if this is a One-Button-Disaster-Recovery device 4036 * by looking for "$DR-10" at offset 43 in inquiry data. 4037 */ 4038 obdr_sig = &inq_buff[OBDR_SIG_OFFSET]; 4039 *is_OBDR_device = (this_device->devtype == TYPE_ROM && 4040 strncmp(obdr_sig, OBDR_TAPE_SIG, 4041 OBDR_SIG_LEN) == 0); 4042 } 4043 kfree(inq_buff); 4044 return 0; 4045 4046bail_out: 4047 kfree(inq_buff); 4048 return rc; 4049} 4050 4051/* 4052 * Helper function to assign bus, target, lun mapping of devices. 4053 * Logical drive target and lun are assigned at this time, but 4054 * physical device lun and target assignment are deferred (assigned 4055 * in hpsa_find_target_lun, called by hpsa_scsi_add_entry.) 4056*/ 4057static void figure_bus_target_lun(struct ctlr_info *h, 4058 u8 *lunaddrbytes, struct hpsa_scsi_dev_t *device) 4059{ 4060 u32 lunid = get_unaligned_le32(lunaddrbytes); 4061 4062 if (!is_logical_dev_addr_mode(lunaddrbytes)) { 4063 /* physical device, target and lun filled in later */ 4064 if (is_hba_lunid(lunaddrbytes)) { 4065 int bus = HPSA_HBA_BUS; 4066 4067 if (!device->rev) 4068 bus = HPSA_LEGACY_HBA_BUS; 4069 hpsa_set_bus_target_lun(device, 4070 bus, 0, lunid & 0x3fff); 4071 } else 4072 /* defer target, lun assignment for physical devices */ 4073 hpsa_set_bus_target_lun(device, 4074 HPSA_PHYSICAL_DEVICE_BUS, -1, -1); 4075 return; 4076 } 4077 /* It's a logical device */ 4078 if (device->external) { 4079 hpsa_set_bus_target_lun(device, 4080 HPSA_EXTERNAL_RAID_VOLUME_BUS, (lunid >> 16) & 0x3fff, 4081 lunid & 0x00ff); 4082 return; 4083 } 4084 hpsa_set_bus_target_lun(device, HPSA_RAID_VOLUME_BUS, 4085 0, lunid & 0x3fff); 4086} 4087 4088static int figure_external_status(struct ctlr_info *h, int raid_ctlr_position, 4089 int i, int nphysicals, int nlocal_logicals) 4090{ 4091 /* In report logicals, local logicals are listed first, 4092 * then any externals. 4093 */ 4094 int logicals_start = nphysicals + (raid_ctlr_position == 0); 4095 4096 if (i == raid_ctlr_position) 4097 return 0; 4098 4099 if (i < logicals_start) 4100 return 0; 4101 4102 /* i is in logicals range, but still within local logicals */ 4103 if ((i - nphysicals - (raid_ctlr_position == 0)) < nlocal_logicals) 4104 return 0; 4105 4106 return 1; /* it's an external lun */ 4107} 4108 4109/* 4110 * Do CISS_REPORT_PHYS and CISS_REPORT_LOG. Data is returned in physdev, 4111 * logdev. The number of luns in physdev and logdev are returned in 4112 * *nphysicals and *nlogicals, respectively. 4113 * Returns 0 on success, -1 otherwise. 4114 */ 4115static int hpsa_gather_lun_info(struct ctlr_info *h, 4116 struct ReportExtendedLUNdata *physdev, u32 *nphysicals, 4117 struct ReportLUNdata *logdev, u32 *nlogicals) 4118{ 4119 if (hpsa_scsi_do_report_phys_luns(h, physdev, sizeof(*physdev))) { 4120 dev_err(&h->pdev->dev, "report physical LUNs failed.\n"); 4121 return -1; 4122 } 4123 *nphysicals = be32_to_cpu(*((__be32 *)physdev->LUNListLength)) / 24; 4124 if (*nphysicals > HPSA_MAX_PHYS_LUN) { 4125 dev_warn(&h->pdev->dev, "maximum physical LUNs (%d) exceeded. %d LUNs ignored.\n", 4126 HPSA_MAX_PHYS_LUN, *nphysicals - HPSA_MAX_PHYS_LUN); 4127 *nphysicals = HPSA_MAX_PHYS_LUN; 4128 } 4129 if (hpsa_scsi_do_report_log_luns(h, logdev, sizeof(*logdev))) { 4130 dev_err(&h->pdev->dev, "report logical LUNs failed.\n"); 4131 return -1; 4132 } 4133 *nlogicals = be32_to_cpu(*((__be32 *) logdev->LUNListLength)) / 8; 4134 /* Reject Logicals in excess of our max capability. */ 4135 if (*nlogicals > HPSA_MAX_LUN) { 4136 dev_warn(&h->pdev->dev, 4137 "maximum logical LUNs (%d) exceeded. " 4138 "%d LUNs ignored.\n", HPSA_MAX_LUN, 4139 *nlogicals - HPSA_MAX_LUN); 4140 *nlogicals = HPSA_MAX_LUN; 4141 } 4142 if (*nlogicals + *nphysicals > HPSA_MAX_PHYS_LUN) { 4143 dev_warn(&h->pdev->dev, 4144 "maximum logical + physical LUNs (%d) exceeded. " 4145 "%d LUNs ignored.\n", HPSA_MAX_PHYS_LUN, 4146 *nphysicals + *nlogicals - HPSA_MAX_PHYS_LUN); 4147 *nlogicals = HPSA_MAX_PHYS_LUN - *nphysicals; 4148 } 4149 return 0; 4150} 4151 4152static u8 *figure_lunaddrbytes(struct ctlr_info *h, int raid_ctlr_position, 4153 int i, int nphysicals, int nlogicals, 4154 struct ReportExtendedLUNdata *physdev_list, 4155 struct ReportLUNdata *logdev_list) 4156{ 4157 /* Helper function, figure out where the LUN ID info is coming from 4158 * given index i, lists of physical and logical devices, where in 4159 * the list the raid controller is supposed to appear (first or last) 4160 */ 4161 4162 int logicals_start = nphysicals + (raid_ctlr_position == 0); 4163 int last_device = nphysicals + nlogicals + (raid_ctlr_position == 0); 4164 4165 if (i == raid_ctlr_position) 4166 return RAID_CTLR_LUNID; 4167 4168 if (i < logicals_start) 4169 return &physdev_list->LUN[i - 4170 (raid_ctlr_position == 0)].lunid[0]; 4171 4172 if (i < last_device) 4173 return &logdev_list->LUN[i - nphysicals - 4174 (raid_ctlr_position == 0)][0]; 4175 BUG(); 4176 return NULL; 4177} 4178 4179/* get physical drive ioaccel handle and queue depth */ 4180static void hpsa_get_ioaccel_drive_info(struct ctlr_info *h, 4181 struct hpsa_scsi_dev_t *dev, 4182 struct ReportExtendedLUNdata *rlep, int rle_index, 4183 struct bmic_identify_physical_device *id_phys) 4184{ 4185 int rc; 4186 struct ext_report_lun_entry *rle; 4187 4188 if (rle_index < 0 || rle_index >= HPSA_MAX_PHYS_LUN) 4189 return; 4190 4191 rle = &rlep->LUN[rle_index]; 4192 4193 dev->ioaccel_handle = rle->ioaccel_handle; 4194 if ((rle->device_flags & 0x08) && dev->ioaccel_handle) 4195 dev->hba_ioaccel_enabled = 1; 4196 memset(id_phys, 0, sizeof(*id_phys)); 4197 rc = hpsa_bmic_id_physical_device(h, &rle->lunid[0], 4198 GET_BMIC_DRIVE_NUMBER(&rle->lunid[0]), id_phys, 4199 sizeof(*id_phys)); 4200 if (!rc) 4201 /* Reserve space for FW operations */ 4202#define DRIVE_CMDS_RESERVED_FOR_FW 2 4203#define DRIVE_QUEUE_DEPTH 7 4204 dev->queue_depth = 4205 le16_to_cpu(id_phys->current_queue_depth_limit) - 4206 DRIVE_CMDS_RESERVED_FOR_FW; 4207 else 4208 dev->queue_depth = DRIVE_QUEUE_DEPTH; /* conservative */ 4209} 4210 4211static void hpsa_get_path_info(struct hpsa_scsi_dev_t *this_device, 4212 struct ReportExtendedLUNdata *rlep, int rle_index, 4213 struct bmic_identify_physical_device *id_phys) 4214{ 4215 struct ext_report_lun_entry *rle; 4216 4217 if (rle_index < 0 || rle_index >= HPSA_MAX_PHYS_LUN) 4218 return; 4219 4220 rle = &rlep->LUN[rle_index]; 4221 4222 if ((rle->device_flags & 0x08) && this_device->ioaccel_handle) 4223 this_device->hba_ioaccel_enabled = 1; 4224 4225 memcpy(&this_device->active_path_index, 4226 &id_phys->active_path_number, 4227 sizeof(this_device->active_path_index)); 4228 memcpy(&this_device->path_map, 4229 &id_phys->redundant_path_present_map, 4230 sizeof(this_device->path_map)); 4231 memcpy(&this_device->box, 4232 &id_phys->alternate_paths_phys_box_on_port, 4233 sizeof(this_device->box)); 4234 memcpy(&this_device->phys_connector, 4235 &id_phys->alternate_paths_phys_connector, 4236 sizeof(this_device->phys_connector)); 4237 memcpy(&this_device->bay, 4238 &id_phys->phys_bay_in_box, 4239 sizeof(this_device->bay)); 4240} 4241 4242/* get number of local logical disks. */ 4243static int hpsa_set_local_logical_count(struct ctlr_info *h, 4244 struct bmic_identify_controller *id_ctlr, 4245 u32 *nlocals) 4246{ 4247 int rc; 4248 4249 if (!id_ctlr) { 4250 dev_warn(&h->pdev->dev, "%s: id_ctlr buffer is NULL.\n", 4251 __func__); 4252 return -ENOMEM; 4253 } 4254 memset(id_ctlr, 0, sizeof(*id_ctlr)); 4255 rc = hpsa_bmic_id_controller(h, id_ctlr, sizeof(*id_ctlr)); 4256 if (!rc) 4257 if (id_ctlr->configured_logical_drive_count < 255) 4258 *nlocals = id_ctlr->configured_logical_drive_count; 4259 else 4260 *nlocals = le16_to_cpu( 4261 id_ctlr->extended_logical_unit_count); 4262 else 4263 *nlocals = -1; 4264 return rc; 4265} 4266 4267static bool hpsa_is_disk_spare(struct ctlr_info *h, u8 *lunaddrbytes) 4268{ 4269 struct bmic_identify_physical_device *id_phys; 4270 bool is_spare = false; 4271 int rc; 4272 4273 id_phys = kzalloc(sizeof(*id_phys), GFP_KERNEL); 4274 if (!id_phys) 4275 return false; 4276 4277 rc = hpsa_bmic_id_physical_device(h, 4278 lunaddrbytes, 4279 GET_BMIC_DRIVE_NUMBER(lunaddrbytes), 4280 id_phys, sizeof(*id_phys)); 4281 if (rc == 0) 4282 is_spare = (id_phys->more_flags >> 6) & 0x01; 4283 4284 kfree(id_phys); 4285 return is_spare; 4286} 4287 4288#define RPL_DEV_FLAG_NON_DISK 0x1 4289#define RPL_DEV_FLAG_UNCONFIG_DISK_REPORTING_SUPPORTED 0x2 4290#define RPL_DEV_FLAG_UNCONFIG_DISK 0x4 4291 4292#define BMIC_DEVICE_TYPE_ENCLOSURE 6 4293 4294static bool hpsa_skip_device(struct ctlr_info *h, u8 *lunaddrbytes, 4295 struct ext_report_lun_entry *rle) 4296{ 4297 u8 device_flags; 4298 u8 device_type; 4299 4300 if (!MASKED_DEVICE(lunaddrbytes)) 4301 return false; 4302 4303 device_flags = rle->device_flags; 4304 device_type = rle->device_type; 4305 4306 if (device_flags & RPL_DEV_FLAG_NON_DISK) { 4307 if (device_type == BMIC_DEVICE_TYPE_ENCLOSURE) 4308 return false; 4309 return true; 4310 } 4311 4312 if (!(device_flags & RPL_DEV_FLAG_UNCONFIG_DISK_REPORTING_SUPPORTED)) 4313 return false; 4314 4315 if (device_flags & RPL_DEV_FLAG_UNCONFIG_DISK) 4316 return false; 4317 4318 /* 4319 * Spares may be spun down, we do not want to 4320 * do an Inquiry to a RAID set spare drive as 4321 * that would have them spun up, that is a 4322 * performance hit because I/O to the RAID device 4323 * stops while the spin up occurs which can take 4324 * over 50 seconds. 4325 */ 4326 if (hpsa_is_disk_spare(h, lunaddrbytes)) 4327 return true; 4328 4329 return false; 4330} 4331 4332static void hpsa_update_scsi_devices(struct ctlr_info *h) 4333{ 4334 /* the idea here is we could get notified 4335 * that some devices have changed, so we do a report 4336 * physical luns and report logical luns cmd, and adjust 4337 * our list of devices accordingly. 4338 * 4339 * The scsi3addr's of devices won't change so long as the 4340 * adapter is not reset. That means we can rescan and 4341 * tell which devices we already know about, vs. new 4342 * devices, vs. disappearing devices. 4343 */ 4344 struct ReportExtendedLUNdata *physdev_list = NULL; 4345 struct ReportLUNdata *logdev_list = NULL; 4346 struct bmic_identify_physical_device *id_phys = NULL; 4347 struct bmic_identify_controller *id_ctlr = NULL; 4348 u32 nphysicals = 0; 4349 u32 nlogicals = 0; 4350 u32 nlocal_logicals = 0; 4351 u32 ndev_allocated = 0; 4352 struct hpsa_scsi_dev_t **currentsd, *this_device, *tmpdevice; 4353 int ncurrent = 0; 4354 int i, n_ext_target_devs, ndevs_to_allocate; 4355 int raid_ctlr_position; 4356 bool physical_device; 4357 DECLARE_BITMAP(lunzerobits, MAX_EXT_TARGETS); 4358 4359 currentsd = kcalloc(HPSA_MAX_DEVICES, sizeof(*currentsd), GFP_KERNEL); 4360 physdev_list = kzalloc(sizeof(*physdev_list), GFP_KERNEL); 4361 logdev_list = kzalloc(sizeof(*logdev_list), GFP_KERNEL); 4362 tmpdevice = kzalloc(sizeof(*tmpdevice), GFP_KERNEL); 4363 id_phys = kzalloc(sizeof(*id_phys), GFP_KERNEL); 4364 id_ctlr = kzalloc(sizeof(*id_ctlr), GFP_KERNEL); 4365 4366 if (!currentsd || !physdev_list || !logdev_list || 4367 !tmpdevice || !id_phys || !id_ctlr) { 4368 dev_err(&h->pdev->dev, "out of memory\n"); 4369 goto out; 4370 } 4371 memset(lunzerobits, 0, sizeof(lunzerobits)); 4372 4373 h->drv_req_rescan = 0; /* cancel scheduled rescan - we're doing it. */ 4374 4375 if (hpsa_gather_lun_info(h, physdev_list, &nphysicals, 4376 logdev_list, &nlogicals)) { 4377 h->drv_req_rescan = 1; 4378 goto out; 4379 } 4380 4381 /* Set number of local logicals (non PTRAID) */ 4382 if (hpsa_set_local_logical_count(h, id_ctlr, &nlocal_logicals)) { 4383 dev_warn(&h->pdev->dev, 4384 "%s: Can't determine number of local logical devices.\n", 4385 __func__); 4386 } 4387 4388 /* We might see up to the maximum number of logical and physical disks 4389 * plus external target devices, and a device for the local RAID 4390 * controller. 4391 */ 4392 ndevs_to_allocate = nphysicals + nlogicals + MAX_EXT_TARGETS + 1; 4393 4394 hpsa_ext_ctrl_present(h, physdev_list); 4395 4396 /* Allocate the per device structures */ 4397 for (i = 0; i < ndevs_to_allocate; i++) { 4398 if (i >= HPSA_MAX_DEVICES) { 4399 dev_warn(&h->pdev->dev, "maximum devices (%d) exceeded." 4400 " %d devices ignored.\n", HPSA_MAX_DEVICES, 4401 ndevs_to_allocate - HPSA_MAX_DEVICES); 4402 break; 4403 } 4404 4405 currentsd[i] = kzalloc(sizeof(*currentsd[i]), GFP_KERNEL); 4406 if (!currentsd[i]) { 4407 h->drv_req_rescan = 1; 4408 goto out; 4409 } 4410 ndev_allocated++; 4411 } 4412 4413 if (is_scsi_rev_5(h)) 4414 raid_ctlr_position = 0; 4415 else 4416 raid_ctlr_position = nphysicals + nlogicals; 4417 4418 /* adjust our table of devices */ 4419 n_ext_target_devs = 0; 4420 for (i = 0; i < nphysicals + nlogicals + 1; i++) { 4421 u8 *lunaddrbytes, is_OBDR = 0; 4422 int rc = 0; 4423 int phys_dev_index = i - (raid_ctlr_position == 0); 4424 bool skip_device = false; 4425 4426 memset(tmpdevice, 0, sizeof(*tmpdevice)); 4427 4428 physical_device = i < nphysicals + (raid_ctlr_position == 0); 4429 4430 /* Figure out where the LUN ID info is coming from */ 4431 lunaddrbytes = figure_lunaddrbytes(h, raid_ctlr_position, 4432 i, nphysicals, nlogicals, physdev_list, logdev_list); 4433 4434 /* Determine if this is a lun from an external target array */ 4435 tmpdevice->external = 4436 figure_external_status(h, raid_ctlr_position, i, 4437 nphysicals, nlocal_logicals); 4438 4439 /* 4440 * Skip over some devices such as a spare. 4441 */ 4442 if (phys_dev_index >= 0 && !tmpdevice->external && 4443 physical_device) { 4444 skip_device = hpsa_skip_device(h, lunaddrbytes, 4445 &physdev_list->LUN[phys_dev_index]); 4446 if (skip_device) 4447 continue; 4448 } 4449 4450 /* Get device type, vendor, model, device id, raid_map */ 4451 rc = hpsa_update_device_info(h, lunaddrbytes, tmpdevice, 4452 &is_OBDR); 4453 if (rc == -ENOMEM) { 4454 dev_warn(&h->pdev->dev, 4455 "Out of memory, rescan deferred.\n"); 4456 h->drv_req_rescan = 1; 4457 goto out; 4458 } 4459 if (rc) { 4460 h->drv_req_rescan = 1; 4461 continue; 4462 } 4463 4464 figure_bus_target_lun(h, lunaddrbytes, tmpdevice); 4465 this_device = currentsd[ncurrent]; 4466 4467 *this_device = *tmpdevice; 4468 this_device->physical_device = physical_device; 4469 4470 /* 4471 * Expose all devices except for physical devices that 4472 * are masked. 4473 */ 4474 if (MASKED_DEVICE(lunaddrbytes) && this_device->physical_device) 4475 this_device->expose_device = 0; 4476 else 4477 this_device->expose_device = 1; 4478 4479 4480 /* 4481 * Get the SAS address for physical devices that are exposed. 4482 */ 4483 if (this_device->physical_device && this_device->expose_device) 4484 hpsa_get_sas_address(h, lunaddrbytes, this_device); 4485 4486 switch (this_device->devtype) { 4487 case TYPE_ROM: 4488 /* We don't *really* support actual CD-ROM devices, 4489 * just "One Button Disaster Recovery" tape drive 4490 * which temporarily pretends to be a CD-ROM drive. 4491 * So we check that the device is really an OBDR tape 4492 * device by checking for "$DR-10" in bytes 43-48 of 4493 * the inquiry data. 4494 */ 4495 if (is_OBDR) 4496 ncurrent++; 4497 break; 4498 case TYPE_DISK: 4499 case TYPE_ZBC: 4500 if (this_device->physical_device) { 4501 /* The disk is in HBA mode. */ 4502 /* Never use RAID mapper in HBA mode. */ 4503 this_device->offload_enabled = 0; 4504 hpsa_get_ioaccel_drive_info(h, this_device, 4505 physdev_list, phys_dev_index, id_phys); 4506 hpsa_get_path_info(this_device, 4507 physdev_list, phys_dev_index, id_phys); 4508 } 4509 ncurrent++; 4510 break; 4511 case TYPE_TAPE: 4512 case TYPE_MEDIUM_CHANGER: 4513 ncurrent++; 4514 break; 4515 case TYPE_ENCLOSURE: 4516 if (!this_device->external) 4517 hpsa_get_enclosure_info(h, lunaddrbytes, 4518 physdev_list, phys_dev_index, 4519 this_device); 4520 ncurrent++; 4521 break; 4522 case TYPE_RAID: 4523 /* Only present the Smartarray HBA as a RAID controller. 4524 * If it's a RAID controller other than the HBA itself 4525 * (an external RAID controller, MSA500 or similar) 4526 * don't present it. 4527 */ 4528 if (!is_hba_lunid(lunaddrbytes)) 4529 break; 4530 ncurrent++; 4531 break; 4532 default: 4533 break; 4534 } 4535 if (ncurrent >= HPSA_MAX_DEVICES) 4536 break; 4537 } 4538 4539 if (h->sas_host == NULL) { 4540 int rc = 0; 4541 4542 rc = hpsa_add_sas_host(h); 4543 if (rc) { 4544 dev_warn(&h->pdev->dev, 4545 "Could not add sas host %d\n", rc); 4546 goto out; 4547 } 4548 } 4549 4550 adjust_hpsa_scsi_table(h, currentsd, ncurrent); 4551out: 4552 kfree(tmpdevice); 4553 for (i = 0; i < ndev_allocated; i++) 4554 kfree(currentsd[i]); 4555 kfree(currentsd); 4556 kfree(physdev_list); 4557 kfree(logdev_list); 4558 kfree(id_ctlr); 4559 kfree(id_phys); 4560} 4561 4562static void hpsa_set_sg_descriptor(struct SGDescriptor *desc, 4563 struct scatterlist *sg) 4564{ 4565 u64 addr64 = (u64) sg_dma_address(sg); 4566 unsigned int len = sg_dma_len(sg); 4567 4568 desc->Addr = cpu_to_le64(addr64); 4569 desc->Len = cpu_to_le32(len); 4570 desc->Ext = 0; 4571} 4572 4573/* 4574 * hpsa_scatter_gather takes a struct scsi_cmnd, (cmd), and does the pci 4575 * dma mapping and fills in the scatter gather entries of the 4576 * hpsa command, cp. 4577 */ 4578static int hpsa_scatter_gather(struct ctlr_info *h, 4579 struct CommandList *cp, 4580 struct scsi_cmnd *cmd) 4581{ 4582 struct scatterlist *sg; 4583 int use_sg, i, sg_limit, chained, last_sg; 4584 struct SGDescriptor *curr_sg; 4585 4586 BUG_ON(scsi_sg_count(cmd) > h->maxsgentries); 4587 4588 use_sg = scsi_dma_map(cmd); 4589 if (use_sg < 0) 4590 return use_sg; 4591 4592 if (!use_sg) 4593 goto sglist_finished; 4594 4595 /* 4596 * If the number of entries is greater than the max for a single list, 4597 * then we have a chained list; we will set up all but one entry in the 4598 * first list (the last entry is saved for link information); 4599 * otherwise, we don't have a chained list and we'll set up at each of 4600 * the entries in the one list. 4601 */ 4602 curr_sg = cp->SG; 4603 chained = use_sg > h->max_cmd_sg_entries; 4604 sg_limit = chained ? h->max_cmd_sg_entries - 1 : use_sg; 4605 last_sg = scsi_sg_count(cmd) - 1; 4606 scsi_for_each_sg(cmd, sg, sg_limit, i) { 4607 hpsa_set_sg_descriptor(curr_sg, sg); 4608 curr_sg++; 4609 } 4610 4611 if (chained) { 4612 /* 4613 * Continue with the chained list. Set curr_sg to the chained 4614 * list. Modify the limit to the total count less the entries 4615 * we've already set up. Resume the scan at the list entry 4616 * where the previous loop left off. 4617 */ 4618 curr_sg = h->cmd_sg_list[cp->cmdindex]; 4619 sg_limit = use_sg - sg_limit; 4620 for_each_sg(sg, sg, sg_limit, i) { 4621 hpsa_set_sg_descriptor(curr_sg, sg); 4622 curr_sg++; 4623 } 4624 } 4625 4626 /* Back the pointer up to the last entry and mark it as "last". */ 4627 (curr_sg - 1)->Ext = cpu_to_le32(HPSA_SG_LAST); 4628 4629 if (use_sg + chained > h->maxSG) 4630 h->maxSG = use_sg + chained; 4631 4632 if (chained) { 4633 cp->Header.SGList = h->max_cmd_sg_entries; 4634 cp->Header.SGTotal = cpu_to_le16(use_sg + 1); 4635 if (hpsa_map_sg_chain_block(h, cp)) { 4636 scsi_dma_unmap(cmd); 4637 return -1; 4638 } 4639 return 0; 4640 } 4641 4642sglist_finished: 4643 4644 cp->Header.SGList = (u8) use_sg; /* no. SGs contig in this cmd */ 4645 cp->Header.SGTotal = cpu_to_le16(use_sg); /* total sgs in cmd list */ 4646 return 0; 4647} 4648 4649static inline void warn_zero_length_transfer(struct ctlr_info *h, 4650 u8 *cdb, int cdb_len, 4651 const char *func) 4652{ 4653 dev_warn(&h->pdev->dev, 4654 "%s: Blocking zero-length request: CDB:%*phN\n", 4655 func, cdb_len, cdb); 4656} 4657 4658#define IO_ACCEL_INELIGIBLE 1 4659/* zero-length transfers trigger hardware errors. */ 4660static bool is_zero_length_transfer(u8 *cdb) 4661{ 4662 u32 block_cnt; 4663 4664 /* Block zero-length transfer sizes on certain commands. */ 4665 switch (cdb[0]) { 4666 case READ_10: 4667 case WRITE_10: 4668 case VERIFY: /* 0x2F */ 4669 case WRITE_VERIFY: /* 0x2E */ 4670 block_cnt = get_unaligned_be16(&cdb[7]); 4671 break; 4672 case READ_12: 4673 case WRITE_12: 4674 case VERIFY_12: /* 0xAF */ 4675 case WRITE_VERIFY_12: /* 0xAE */ 4676 block_cnt = get_unaligned_be32(&cdb[6]); 4677 break; 4678 case READ_16: 4679 case WRITE_16: 4680 case VERIFY_16: /* 0x8F */ 4681 block_cnt = get_unaligned_be32(&cdb[10]); 4682 break; 4683 default: 4684 return false; 4685 } 4686 4687 return block_cnt == 0; 4688} 4689 4690static int fixup_ioaccel_cdb(u8 *cdb, int *cdb_len) 4691{ 4692 int is_write = 0; 4693 u32 block; 4694 u32 block_cnt; 4695 4696 /* Perform some CDB fixups if needed using 10 byte reads/writes only */ 4697 switch (cdb[0]) { 4698 case WRITE_6: 4699 case WRITE_12: 4700 is_write = 1; 4701 fallthrough; 4702 case READ_6: 4703 case READ_12: 4704 if (*cdb_len == 6) { 4705 block = (((cdb[1] & 0x1F) << 16) | 4706 (cdb[2] << 8) | 4707 cdb[3]); 4708 block_cnt = cdb[4]; 4709 if (block_cnt == 0) 4710 block_cnt = 256; 4711 } else { 4712 BUG_ON(*cdb_len != 12); 4713 block = get_unaligned_be32(&cdb[2]); 4714 block_cnt = get_unaligned_be32(&cdb[6]); 4715 } 4716 if (block_cnt > 0xffff) 4717 return IO_ACCEL_INELIGIBLE; 4718 4719 cdb[0] = is_write ? WRITE_10 : READ_10; 4720 cdb[1] = 0; 4721 cdb[2] = (u8) (block >> 24); 4722 cdb[3] = (u8) (block >> 16); 4723 cdb[4] = (u8) (block >> 8); 4724 cdb[5] = (u8) (block); 4725 cdb[6] = 0; 4726 cdb[7] = (u8) (block_cnt >> 8); 4727 cdb[8] = (u8) (block_cnt); 4728 cdb[9] = 0; 4729 *cdb_len = 10; 4730 break; 4731 } 4732 return 0; 4733} 4734 4735static int hpsa_scsi_ioaccel1_queue_command(struct ctlr_info *h, 4736 struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len, 4737 u8 *scsi3addr, struct hpsa_scsi_dev_t *phys_disk) 4738{ 4739 struct scsi_cmnd *cmd = c->scsi_cmd; 4740 struct io_accel1_cmd *cp = &h->ioaccel_cmd_pool[c->cmdindex]; 4741 unsigned int len; 4742 unsigned int total_len = 0; 4743 struct scatterlist *sg; 4744 u64 addr64; 4745 int use_sg, i; 4746 struct SGDescriptor *curr_sg; 4747 u32 control = IOACCEL1_CONTROL_SIMPLEQUEUE; 4748 4749 /* TODO: implement chaining support */ 4750 if (scsi_sg_count(cmd) > h->ioaccel_maxsg) { 4751 atomic_dec(&phys_disk->ioaccel_cmds_out); 4752 return IO_ACCEL_INELIGIBLE; 4753 } 4754 4755 BUG_ON(cmd->cmd_len > IOACCEL1_IOFLAGS_CDBLEN_MAX); 4756 4757 if (is_zero_length_transfer(cdb)) { 4758 warn_zero_length_transfer(h, cdb, cdb_len, __func__); 4759 atomic_dec(&phys_disk->ioaccel_cmds_out); 4760 return IO_ACCEL_INELIGIBLE; 4761 } 4762 4763 if (fixup_ioaccel_cdb(cdb, &cdb_len)) { 4764 atomic_dec(&phys_disk->ioaccel_cmds_out); 4765 return IO_ACCEL_INELIGIBLE; 4766 } 4767 4768 c->cmd_type = CMD_IOACCEL1; 4769 4770 /* Adjust the DMA address to point to the accelerated command buffer */ 4771 c->busaddr = (u32) h->ioaccel_cmd_pool_dhandle + 4772 (c->cmdindex * sizeof(*cp)); 4773 BUG_ON(c->busaddr & 0x0000007F); 4774 4775 use_sg = scsi_dma_map(cmd); 4776 if (use_sg < 0) { 4777 atomic_dec(&phys_disk->ioaccel_cmds_out); 4778 return use_sg; 4779 } 4780 4781 if (use_sg) { 4782 curr_sg = cp->SG; 4783 scsi_for_each_sg(cmd, sg, use_sg, i) { 4784 addr64 = (u64) sg_dma_address(sg); 4785 len = sg_dma_len(sg); 4786 total_len += len; 4787 curr_sg->Addr = cpu_to_le64(addr64); 4788 curr_sg->Len = cpu_to_le32(len); 4789 curr_sg->Ext = cpu_to_le32(0); 4790 curr_sg++; 4791 } 4792 (--curr_sg)->Ext = cpu_to_le32(HPSA_SG_LAST); 4793 4794 switch (cmd->sc_data_direction) { 4795 case DMA_TO_DEVICE: 4796 control |= IOACCEL1_CONTROL_DATA_OUT; 4797 break; 4798 case DMA_FROM_DEVICE: 4799 control |= IOACCEL1_CONTROL_DATA_IN; 4800 break; 4801 case DMA_NONE: 4802 control |= IOACCEL1_CONTROL_NODATAXFER; 4803 break; 4804 default: 4805 dev_err(&h->pdev->dev, "unknown data direction: %d\n", 4806 cmd->sc_data_direction); 4807 BUG(); 4808 break; 4809 } 4810 } else { 4811 control |= IOACCEL1_CONTROL_NODATAXFER; 4812 } 4813 4814 c->Header.SGList = use_sg; 4815 /* Fill out the command structure to submit */ 4816 cp->dev_handle = cpu_to_le16(ioaccel_handle & 0xFFFF); 4817 cp->transfer_len = cpu_to_le32(total_len); 4818 cp->io_flags = cpu_to_le16(IOACCEL1_IOFLAGS_IO_REQ | 4819 (cdb_len & IOACCEL1_IOFLAGS_CDBLEN_MASK)); 4820 cp->control = cpu_to_le32(control); 4821 memcpy(cp->CDB, cdb, cdb_len); 4822 memcpy(cp->CISS_LUN, scsi3addr, 8); 4823 /* Tag was already set at init time. */ 4824 enqueue_cmd_and_start_io(h, c); 4825 return 0; 4826} 4827 4828/* 4829 * Queue a command directly to a device behind the controller using the 4830 * I/O accelerator path. 4831 */ 4832static int hpsa_scsi_ioaccel_direct_map(struct ctlr_info *h, 4833 struct CommandList *c) 4834{ 4835 struct scsi_cmnd *cmd = c->scsi_cmd; 4836 struct hpsa_scsi_dev_t *dev = cmd->device->hostdata; 4837 4838 if (!dev) 4839 return -1; 4840 4841 c->phys_disk = dev; 4842 4843 if (dev->in_reset) 4844 return -1; 4845 4846 return hpsa_scsi_ioaccel_queue_command(h, c, dev->ioaccel_handle, 4847 cmd->cmnd, cmd->cmd_len, dev->scsi3addr, dev); 4848} 4849 4850/* 4851 * Set encryption parameters for the ioaccel2 request 4852 */ 4853static void set_encrypt_ioaccel2(struct ctlr_info *h, 4854 struct CommandList *c, struct io_accel2_cmd *cp) 4855{ 4856 struct scsi_cmnd *cmd = c->scsi_cmd; 4857 struct hpsa_scsi_dev_t *dev = cmd->device->hostdata; 4858 struct raid_map_data *map = &dev->raid_map; 4859 u64 first_block; 4860 4861 /* Are we doing encryption on this device */ 4862 if (!(le16_to_cpu(map->flags) & RAID_MAP_FLAG_ENCRYPT_ON)) 4863 return; 4864 /* Set the data encryption key index. */ 4865 cp->dekindex = map->dekindex; 4866 4867 /* Set the encryption enable flag, encoded into direction field. */ 4868 cp->direction |= IOACCEL2_DIRECTION_ENCRYPT_MASK; 4869 4870 /* Set encryption tweak values based on logical block address 4871 * If block size is 512, tweak value is LBA. 4872 * For other block sizes, tweak is (LBA * block size)/ 512) 4873 */ 4874 switch (cmd->cmnd[0]) { 4875 /* Required? 6-byte cdbs eliminated by fixup_ioaccel_cdb */ 4876 case READ_6: 4877 case WRITE_6: 4878 first_block = (((cmd->cmnd[1] & 0x1F) << 16) | 4879 (cmd->cmnd[2] << 8) | 4880 cmd->cmnd[3]); 4881 break; 4882 case WRITE_10: 4883 case READ_10: 4884 /* Required? 12-byte cdbs eliminated by fixup_ioaccel_cdb */ 4885 case WRITE_12: 4886 case READ_12: 4887 first_block = get_unaligned_be32(&cmd->cmnd[2]); 4888 break; 4889 case WRITE_16: 4890 case READ_16: 4891 first_block = get_unaligned_be64(&cmd->cmnd[2]); 4892 break; 4893 default: 4894 dev_err(&h->pdev->dev, 4895 "ERROR: %s: size (0x%x) not supported for encryption\n", 4896 __func__, cmd->cmnd[0]); 4897 BUG(); 4898 break; 4899 } 4900 4901 if (le32_to_cpu(map->volume_blk_size) != 512) 4902 first_block = first_block * 4903 le32_to_cpu(map->volume_blk_size)/512; 4904 4905 cp->tweak_lower = cpu_to_le32(first_block); 4906 cp->tweak_upper = cpu_to_le32(first_block >> 32); 4907} 4908 4909static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h, 4910 struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len, 4911 u8 *scsi3addr, struct hpsa_scsi_dev_t *phys_disk) 4912{ 4913 struct scsi_cmnd *cmd = c->scsi_cmd; 4914 struct io_accel2_cmd *cp = &h->ioaccel2_cmd_pool[c->cmdindex]; 4915 struct ioaccel2_sg_element *curr_sg; 4916 int use_sg, i; 4917 struct scatterlist *sg; 4918 u64 addr64; 4919 u32 len; 4920 u32 total_len = 0; 4921 4922 if (!cmd->device) 4923 return -1; 4924 4925 if (!cmd->device->hostdata) 4926 return -1; 4927 4928 BUG_ON(scsi_sg_count(cmd) > h->maxsgentries); 4929 4930 if (is_zero_length_transfer(cdb)) { 4931 warn_zero_length_transfer(h, cdb, cdb_len, __func__); 4932 atomic_dec(&phys_disk->ioaccel_cmds_out); 4933 return IO_ACCEL_INELIGIBLE; 4934 } 4935 4936 if (fixup_ioaccel_cdb(cdb, &cdb_len)) { 4937 atomic_dec(&phys_disk->ioaccel_cmds_out); 4938 return IO_ACCEL_INELIGIBLE; 4939 } 4940 4941 c->cmd_type = CMD_IOACCEL2; 4942 /* Adjust the DMA address to point to the accelerated command buffer */ 4943 c->busaddr = (u32) h->ioaccel2_cmd_pool_dhandle + 4944 (c->cmdindex * sizeof(*cp)); 4945 BUG_ON(c->busaddr & 0x0000007F); 4946 4947 memset(cp, 0, sizeof(*cp)); 4948 cp->IU_type = IOACCEL2_IU_TYPE; 4949 4950 use_sg = scsi_dma_map(cmd); 4951 if (use_sg < 0) { 4952 atomic_dec(&phys_disk->ioaccel_cmds_out); 4953 return use_sg; 4954 } 4955 4956 if (use_sg) { 4957 curr_sg = cp->sg; 4958 if (use_sg > h->ioaccel_maxsg) { 4959 addr64 = le64_to_cpu( 4960 h->ioaccel2_cmd_sg_list[c->cmdindex]->address); 4961 curr_sg->address = cpu_to_le64(addr64); 4962 curr_sg->length = 0; 4963 curr_sg->reserved[0] = 0; 4964 curr_sg->reserved[1] = 0; 4965 curr_sg->reserved[2] = 0; 4966 curr_sg->chain_indicator = IOACCEL2_CHAIN; 4967 4968 curr_sg = h->ioaccel2_cmd_sg_list[c->cmdindex]; 4969 } 4970 scsi_for_each_sg(cmd, sg, use_sg, i) { 4971 addr64 = (u64) sg_dma_address(sg); 4972 len = sg_dma_len(sg); 4973 total_len += len; 4974 curr_sg->address = cpu_to_le64(addr64); 4975 curr_sg->length = cpu_to_le32(len); 4976 curr_sg->reserved[0] = 0; 4977 curr_sg->reserved[1] = 0; 4978 curr_sg->reserved[2] = 0; 4979 curr_sg->chain_indicator = 0; 4980 curr_sg++; 4981 } 4982 4983 /* 4984 * Set the last s/g element bit 4985 */ 4986 (curr_sg - 1)->chain_indicator = IOACCEL2_LAST_SG; 4987 4988 switch (cmd->sc_data_direction) { 4989 case DMA_TO_DEVICE: 4990 cp->direction &= ~IOACCEL2_DIRECTION_MASK; 4991 cp->direction |= IOACCEL2_DIR_DATA_OUT; 4992 break; 4993 case DMA_FROM_DEVICE: 4994 cp->direction &= ~IOACCEL2_DIRECTION_MASK; 4995 cp->direction |= IOACCEL2_DIR_DATA_IN; 4996 break; 4997 case DMA_NONE: 4998 cp->direction &= ~IOACCEL2_DIRECTION_MASK; 4999 cp->direction |= IOACCEL2_DIR_NO_DATA; 5000 break; 5001 default: 5002 dev_err(&h->pdev->dev, "unknown data direction: %d\n", 5003 cmd->sc_data_direction); 5004 BUG(); 5005 break; 5006 } 5007 } else { 5008 cp->direction &= ~IOACCEL2_DIRECTION_MASK; 5009 cp->direction |= IOACCEL2_DIR_NO_DATA; 5010 } 5011 5012 /* Set encryption parameters, if necessary */ 5013 set_encrypt_ioaccel2(h, c, cp); 5014 5015 cp->scsi_nexus = cpu_to_le32(ioaccel_handle); 5016 cp->Tag = cpu_to_le32(c->cmdindex << DIRECT_LOOKUP_SHIFT); 5017 memcpy(cp->cdb, cdb, sizeof(cp->cdb)); 5018 5019 cp->data_len = cpu_to_le32(total_len); 5020 cp->err_ptr = cpu_to_le64(c->busaddr + 5021 offsetof(struct io_accel2_cmd, error_data)); 5022 cp->err_len = cpu_to_le32(sizeof(cp->error_data)); 5023 5024 /* fill in sg elements */ 5025 if (use_sg > h->ioaccel_maxsg) { 5026 cp->sg_count = 1; 5027 cp->sg[0].length = cpu_to_le32(use_sg * sizeof(cp->sg[0])); 5028 if (hpsa_map_ioaccel2_sg_chain_block(h, cp, c)) { 5029 atomic_dec(&phys_disk->ioaccel_cmds_out); 5030 scsi_dma_unmap(cmd); 5031 return -1; 5032 } 5033 } else 5034 cp->sg_count = (u8) use_sg; 5035 5036 if (phys_disk->in_reset) { 5037 cmd->result = DID_RESET << 16; 5038 return -1; 5039 } 5040 5041 enqueue_cmd_and_start_io(h, c); 5042 return 0; 5043} 5044 5045/* 5046 * Queue a command to the correct I/O accelerator path. 5047 */ 5048static int hpsa_scsi_ioaccel_queue_command(struct ctlr_info *h, 5049 struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len, 5050 u8 *scsi3addr, struct hpsa_scsi_dev_t *phys_disk) 5051{ 5052 if (!c->scsi_cmd->device) 5053 return -1; 5054 5055 if (!c->scsi_cmd->device->hostdata) 5056 return -1; 5057 5058 if (phys_disk->in_reset) 5059 return -1; 5060 5061 /* Try to honor the device's queue depth */ 5062 if (atomic_inc_return(&phys_disk->ioaccel_cmds_out) > 5063 phys_disk->queue_depth) { 5064 atomic_dec(&phys_disk->ioaccel_cmds_out); 5065 return IO_ACCEL_INELIGIBLE; 5066 } 5067 if (h->transMethod & CFGTBL_Trans_io_accel1) 5068 return hpsa_scsi_ioaccel1_queue_command(h, c, ioaccel_handle, 5069 cdb, cdb_len, scsi3addr, 5070 phys_disk); 5071 else 5072 return hpsa_scsi_ioaccel2_queue_command(h, c, ioaccel_handle, 5073 cdb, cdb_len, scsi3addr, 5074 phys_disk); 5075} 5076 5077static void raid_map_helper(struct raid_map_data *map, 5078 int offload_to_mirror, u32 *map_index, u32 *current_group) 5079{ 5080 if (offload_to_mirror == 0) { 5081 /* use physical disk in the first mirrored group. */ 5082 *map_index %= le16_to_cpu(map->data_disks_per_row); 5083 return; 5084 } 5085 do { 5086 /* determine mirror group that *map_index indicates */ 5087 *current_group = *map_index / 5088 le16_to_cpu(map->data_disks_per_row); 5089 if (offload_to_mirror == *current_group) 5090 continue; 5091 if (*current_group < le16_to_cpu(map->layout_map_count) - 1) { 5092 /* select map index from next group */ 5093 *map_index += le16_to_cpu(map->data_disks_per_row); 5094 (*current_group)++; 5095 } else { 5096 /* select map index from first group */ 5097 *map_index %= le16_to_cpu(map->data_disks_per_row); 5098 *current_group = 0; 5099 } 5100 } while (offload_to_mirror != *current_group); 5101} 5102 5103/* 5104 * Attempt to perform offload RAID mapping for a logical volume I/O. 5105 */ 5106static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h, 5107 struct CommandList *c) 5108{ 5109 struct scsi_cmnd *cmd = c->scsi_cmd; 5110 struct hpsa_scsi_dev_t *dev = cmd->device->hostdata; 5111 struct raid_map_data *map = &dev->raid_map; 5112 struct raid_map_disk_data *dd = &map->data[0]; 5113 int is_write = 0; 5114 u32 map_index; 5115 u64 first_block, last_block; 5116 u32 block_cnt; 5117 u32 blocks_per_row; 5118 u64 first_row, last_row; 5119 u32 first_row_offset, last_row_offset; 5120 u32 first_column, last_column; 5121 u64 r0_first_row, r0_last_row; 5122 u32 r5or6_blocks_per_row; 5123 u64 r5or6_first_row, r5or6_last_row; 5124 u32 r5or6_first_row_offset, r5or6_last_row_offset; 5125 u32 r5or6_first_column, r5or6_last_column; 5126 u32 total_disks_per_row; 5127 u32 stripesize; 5128 u32 first_group, last_group, current_group; 5129 u32 map_row; 5130 u32 disk_handle; 5131 u64 disk_block; 5132 u32 disk_block_cnt; 5133 u8 cdb[16]; 5134 u8 cdb_len; 5135 u16 strip_size; 5136#if BITS_PER_LONG == 32 5137 u64 tmpdiv; 5138#endif 5139 int offload_to_mirror; 5140 5141 if (!dev) 5142 return -1; 5143 5144 if (dev->in_reset) 5145 return -1; 5146 5147 /* check for valid opcode, get LBA and block count */ 5148 switch (cmd->cmnd[0]) { 5149 case WRITE_6: 5150 is_write = 1; 5151 fallthrough; 5152 case READ_6: 5153 first_block = (((cmd->cmnd[1] & 0x1F) << 16) | 5154 (cmd->cmnd[2] << 8) | 5155 cmd->cmnd[3]); 5156 block_cnt = cmd->cmnd[4]; 5157 if (block_cnt == 0) 5158 block_cnt = 256; 5159 break; 5160 case WRITE_10: 5161 is_write = 1; 5162 fallthrough; 5163 case READ_10: 5164 first_block = 5165 (((u64) cmd->cmnd[2]) << 24) | 5166 (((u64) cmd->cmnd[3]) << 16) | 5167 (((u64) cmd->cmnd[4]) << 8) | 5168 cmd->cmnd[5]; 5169 block_cnt = 5170 (((u32) cmd->cmnd[7]) << 8) | 5171 cmd->cmnd[8]; 5172 break; 5173 case WRITE_12: 5174 is_write = 1; 5175 fallthrough; 5176 case READ_12: 5177 first_block = 5178 (((u64) cmd->cmnd[2]) << 24) | 5179 (((u64) cmd->cmnd[3]) << 16) | 5180 (((u64) cmd->cmnd[4]) << 8) | 5181 cmd->cmnd[5]; 5182 block_cnt = 5183 (((u32) cmd->cmnd[6]) << 24) | 5184 (((u32) cmd->cmnd[7]) << 16) | 5185 (((u32) cmd->cmnd[8]) << 8) | 5186 cmd->cmnd[9]; 5187 break; 5188 case WRITE_16: 5189 is_write = 1; 5190 fallthrough; 5191 case READ_16: 5192 first_block = 5193 (((u64) cmd->cmnd[2]) << 56) | 5194 (((u64) cmd->cmnd[3]) << 48) | 5195 (((u64) cmd->cmnd[4]) << 40) | 5196 (((u64) cmd->cmnd[5]) << 32) | 5197 (((u64) cmd->cmnd[6]) << 24) | 5198 (((u64) cmd->cmnd[7]) << 16) | 5199 (((u64) cmd->cmnd[8]) << 8) | 5200 cmd->cmnd[9]; 5201 block_cnt = 5202 (((u32) cmd->cmnd[10]) << 24) | 5203 (((u32) cmd->cmnd[11]) << 16) | 5204 (((u32) cmd->cmnd[12]) << 8) | 5205 cmd->cmnd[13]; 5206 break; 5207 default: 5208 return IO_ACCEL_INELIGIBLE; /* process via normal I/O path */ 5209 } 5210 last_block = first_block + block_cnt - 1; 5211 5212 /* check for write to non-RAID-0 */ 5213 if (is_write && dev->raid_level != 0) 5214 return IO_ACCEL_INELIGIBLE; 5215 5216 /* check for invalid block or wraparound */ 5217 if (last_block >= le64_to_cpu(map->volume_blk_cnt) || 5218 last_block < first_block) 5219 return IO_ACCEL_INELIGIBLE; 5220 5221 /* calculate stripe information for the request */ 5222 blocks_per_row = le16_to_cpu(map->data_disks_per_row) * 5223 le16_to_cpu(map->strip_size); 5224 strip_size = le16_to_cpu(map->strip_size); 5225#if BITS_PER_LONG == 32 5226 tmpdiv = first_block; 5227 (void) do_div(tmpdiv, blocks_per_row); 5228 first_row = tmpdiv; 5229 tmpdiv = last_block; 5230 (void) do_div(tmpdiv, blocks_per_row); 5231 last_row = tmpdiv; 5232 first_row_offset = (u32) (first_block - (first_row * blocks_per_row)); 5233 last_row_offset = (u32) (last_block - (last_row * blocks_per_row)); 5234 tmpdiv = first_row_offset; 5235 (void) do_div(tmpdiv, strip_size); 5236 first_column = tmpdiv; 5237 tmpdiv = last_row_offset; 5238 (void) do_div(tmpdiv, strip_size); 5239 last_column = tmpdiv; 5240#else 5241 first_row = first_block / blocks_per_row; 5242 last_row = last_block / blocks_per_row; 5243 first_row_offset = (u32) (first_block - (first_row * blocks_per_row)); 5244 last_row_offset = (u32) (last_block - (last_row * blocks_per_row)); 5245 first_column = first_row_offset / strip_size; 5246 last_column = last_row_offset / strip_size; 5247#endif 5248 5249 /* if this isn't a single row/column then give to the controller */ 5250 if ((first_row != last_row) || (first_column != last_column)) 5251 return IO_ACCEL_INELIGIBLE; 5252 5253 /* proceeding with driver mapping */ 5254 total_disks_per_row = le16_to_cpu(map->data_disks_per_row) + 5255 le16_to_cpu(map->metadata_disks_per_row); 5256 map_row = ((u32)(first_row >> map->parity_rotation_shift)) % 5257 le16_to_cpu(map->row_cnt); 5258 map_index = (map_row * total_disks_per_row) + first_column; 5259 5260 switch (dev->raid_level) { 5261 case HPSA_RAID_0: 5262 break; /* nothing special to do */ 5263 case HPSA_RAID_1: 5264 /* Handles load balance across RAID 1 members. 5265 * (2-drive R1 and R10 with even # of drives.) 5266 * Appropriate for SSDs, not optimal for HDDs 5267 * Ensure we have the correct raid_map. 5268 */ 5269 if (le16_to_cpu(map->layout_map_count) != 2) { 5270 hpsa_turn_off_ioaccel_for_device(dev); 5271 return IO_ACCEL_INELIGIBLE; 5272 } 5273 if (dev->offload_to_mirror) 5274 map_index += le16_to_cpu(map->data_disks_per_row); 5275 dev->offload_to_mirror = !dev->offload_to_mirror; 5276 break; 5277 case HPSA_RAID_ADM: 5278 /* Handles N-way mirrors (R1-ADM) 5279 * and R10 with # of drives divisible by 3.) 5280 * Ensure we have the correct raid_map. 5281 */ 5282 if (le16_to_cpu(map->layout_map_count) != 3) { 5283 hpsa_turn_off_ioaccel_for_device(dev); 5284 return IO_ACCEL_INELIGIBLE; 5285 } 5286 5287 offload_to_mirror = dev->offload_to_mirror; 5288 raid_map_helper(map, offload_to_mirror, 5289 &map_index, ¤t_group); 5290 /* set mirror group to use next time */ 5291 offload_to_mirror = 5292 (offload_to_mirror >= 5293 le16_to_cpu(map->layout_map_count) - 1) 5294 ? 0 : offload_to_mirror + 1; 5295 dev->offload_to_mirror = offload_to_mirror; 5296 /* Avoid direct use of dev->offload_to_mirror within this 5297 * function since multiple threads might simultaneously 5298 * increment it beyond the range of dev->layout_map_count -1. 5299 */ 5300 break; 5301 case HPSA_RAID_5: 5302 case HPSA_RAID_6: 5303 if (le16_to_cpu(map->layout_map_count) <= 1) 5304 break; 5305 5306 /* Verify first and last block are in same RAID group */ 5307 r5or6_blocks_per_row = 5308 le16_to_cpu(map->strip_size) * 5309 le16_to_cpu(map->data_disks_per_row); 5310 if (r5or6_blocks_per_row == 0) { 5311 hpsa_turn_off_ioaccel_for_device(dev); 5312 return IO_ACCEL_INELIGIBLE; 5313 } 5314 stripesize = r5or6_blocks_per_row * 5315 le16_to_cpu(map->layout_map_count); 5316#if BITS_PER_LONG == 32 5317 tmpdiv = first_block; 5318 first_group = do_div(tmpdiv, stripesize); 5319 tmpdiv = first_group; 5320 (void) do_div(tmpdiv, r5or6_blocks_per_row); 5321 first_group = tmpdiv; 5322 tmpdiv = last_block; 5323 last_group = do_div(tmpdiv, stripesize); 5324 tmpdiv = last_group; 5325 (void) do_div(tmpdiv, r5or6_blocks_per_row); 5326 last_group = tmpdiv; 5327#else 5328 first_group = (first_block % stripesize) / r5or6_blocks_per_row; 5329 last_group = (last_block % stripesize) / r5or6_blocks_per_row; 5330#endif 5331 if (first_group != last_group) 5332 return IO_ACCEL_INELIGIBLE; 5333 5334 /* Verify request is in a single row of RAID 5/6 */ 5335#if BITS_PER_LONG == 32 5336 tmpdiv = first_block; 5337 (void) do_div(tmpdiv, stripesize); 5338 first_row = r5or6_first_row = r0_first_row = tmpdiv; 5339 tmpdiv = last_block; 5340 (void) do_div(tmpdiv, stripesize); 5341 r5or6_last_row = r0_last_row = tmpdiv; 5342#else 5343 first_row = r5or6_first_row = r0_first_row = 5344 first_block / stripesize; 5345 r5or6_last_row = r0_last_row = last_block / stripesize; 5346#endif 5347 if (r5or6_first_row != r5or6_last_row) 5348 return IO_ACCEL_INELIGIBLE; 5349 5350 5351 /* Verify request is in a single column */ 5352#if BITS_PER_LONG == 32 5353 tmpdiv = first_block; 5354 first_row_offset = do_div(tmpdiv, stripesize); 5355 tmpdiv = first_row_offset; 5356 first_row_offset = (u32) do_div(tmpdiv, r5or6_blocks_per_row); 5357 r5or6_first_row_offset = first_row_offset; 5358 tmpdiv = last_block; 5359 r5or6_last_row_offset = do_div(tmpdiv, stripesize); 5360 tmpdiv = r5or6_last_row_offset; 5361 r5or6_last_row_offset = do_div(tmpdiv, r5or6_blocks_per_row); 5362 tmpdiv = r5or6_first_row_offset; 5363 (void) do_div(tmpdiv, map->strip_size); 5364 first_column = r5or6_first_column = tmpdiv; 5365 tmpdiv = r5or6_last_row_offset; 5366 (void) do_div(tmpdiv, map->strip_size); 5367 r5or6_last_column = tmpdiv; 5368#else 5369 first_row_offset = r5or6_first_row_offset = 5370 (u32)((first_block % stripesize) % 5371 r5or6_blocks_per_row); 5372 5373 r5or6_last_row_offset = 5374 (u32)((last_block % stripesize) % 5375 r5or6_blocks_per_row); 5376 5377 first_column = r5or6_first_column = 5378 r5or6_first_row_offset / le16_to_cpu(map->strip_size); 5379 r5or6_last_column = 5380 r5or6_last_row_offset / le16_to_cpu(map->strip_size); 5381#endif 5382 if (r5or6_first_column != r5or6_last_column) 5383 return IO_ACCEL_INELIGIBLE; 5384 5385 /* Request is eligible */ 5386 map_row = ((u32)(first_row >> map->parity_rotation_shift)) % 5387 le16_to_cpu(map->row_cnt); 5388 5389 map_index = (first_group * 5390 (le16_to_cpu(map->row_cnt) * total_disks_per_row)) + 5391 (map_row * total_disks_per_row) + first_column; 5392 break; 5393 default: 5394 return IO_ACCEL_INELIGIBLE; 5395 } 5396 5397 if (unlikely(map_index >= RAID_MAP_MAX_ENTRIES)) 5398 return IO_ACCEL_INELIGIBLE; 5399 5400 c->phys_disk = dev->phys_disk[map_index]; 5401 if (!c->phys_disk) 5402 return IO_ACCEL_INELIGIBLE; 5403 5404 disk_handle = dd[map_index].ioaccel_handle; 5405 disk_block = le64_to_cpu(map->disk_starting_blk) + 5406 first_row * le16_to_cpu(map->strip_size) + 5407 (first_row_offset - first_column * 5408 le16_to_cpu(map->strip_size)); 5409 disk_block_cnt = block_cnt; 5410 5411 /* handle differing logical/physical block sizes */ 5412 if (map->phys_blk_shift) { 5413 disk_block <<= map->phys_blk_shift; 5414 disk_block_cnt <<= map->phys_blk_shift; 5415 } 5416 BUG_ON(disk_block_cnt > 0xffff); 5417 5418 /* build the new CDB for the physical disk I/O */ 5419 if (disk_block > 0xffffffff) { 5420 cdb[0] = is_write ? WRITE_16 : READ_16; 5421 cdb[1] = 0; 5422 cdb[2] = (u8) (disk_block >> 56); 5423 cdb[3] = (u8) (disk_block >> 48); 5424 cdb[4] = (u8) (disk_block >> 40); 5425 cdb[5] = (u8) (disk_block >> 32); 5426 cdb[6] = (u8) (disk_block >> 24); 5427 cdb[7] = (u8) (disk_block >> 16); 5428 cdb[8] = (u8) (disk_block >> 8); 5429 cdb[9] = (u8) (disk_block); 5430 cdb[10] = (u8) (disk_block_cnt >> 24); 5431 cdb[11] = (u8) (disk_block_cnt >> 16); 5432 cdb[12] = (u8) (disk_block_cnt >> 8); 5433 cdb[13] = (u8) (disk_block_cnt); 5434 cdb[14] = 0; 5435 cdb[15] = 0; 5436 cdb_len = 16; 5437 } else { 5438 cdb[0] = is_write ? WRITE_10 : READ_10; 5439 cdb[1] = 0; 5440 cdb[2] = (u8) (disk_block >> 24); 5441 cdb[3] = (u8) (disk_block >> 16); 5442 cdb[4] = (u8) (disk_block >> 8); 5443 cdb[5] = (u8) (disk_block); 5444 cdb[6] = 0; 5445 cdb[7] = (u8) (disk_block_cnt >> 8); 5446 cdb[8] = (u8) (disk_block_cnt); 5447 cdb[9] = 0; 5448 cdb_len = 10; 5449 } 5450 return hpsa_scsi_ioaccel_queue_command(h, c, disk_handle, cdb, cdb_len, 5451 dev->scsi3addr, 5452 dev->phys_disk[map_index]); 5453} 5454 5455/* 5456 * Submit commands down the "normal" RAID stack path 5457 * All callers to hpsa_ciss_submit must check lockup_detected 5458 * beforehand, before (opt.) and after calling cmd_alloc 5459 */ 5460static int hpsa_ciss_submit(struct ctlr_info *h, 5461 struct CommandList *c, struct scsi_cmnd *cmd, 5462 struct hpsa_scsi_dev_t *dev) 5463{ 5464 cmd->host_scribble = (unsigned char *) c; 5465 c->cmd_type = CMD_SCSI; 5466 c->scsi_cmd = cmd; 5467 c->Header.ReplyQueue = 0; /* unused in simple mode */ 5468 memcpy(&c->Header.LUN.LunAddrBytes[0], &dev->scsi3addr[0], 8); 5469 c->Header.tag = cpu_to_le64((c->cmdindex << DIRECT_LOOKUP_SHIFT)); 5470 5471 /* Fill in the request block... */ 5472 5473 c->Request.Timeout = 0; 5474 BUG_ON(cmd->cmd_len > sizeof(c->Request.CDB)); 5475 c->Request.CDBLen = cmd->cmd_len; 5476 memcpy(c->Request.CDB, cmd->cmnd, cmd->cmd_len); 5477 switch (cmd->sc_data_direction) { 5478 case DMA_TO_DEVICE: 5479 c->Request.type_attr_dir = 5480 TYPE_ATTR_DIR(TYPE_CMD, ATTR_SIMPLE, XFER_WRITE); 5481 break; 5482 case DMA_FROM_DEVICE: 5483 c->Request.type_attr_dir = 5484 TYPE_ATTR_DIR(TYPE_CMD, ATTR_SIMPLE, XFER_READ); 5485 break; 5486 case DMA_NONE: 5487 c->Request.type_attr_dir = 5488 TYPE_ATTR_DIR(TYPE_CMD, ATTR_SIMPLE, XFER_NONE); 5489 break; 5490 case DMA_BIDIRECTIONAL: 5491 /* This can happen if a buggy application does a scsi passthru 5492 * and sets both inlen and outlen to non-zero. ( see 5493 * ../scsi/scsi_ioctl.c:scsi_ioctl_send_command() ) 5494 */ 5495 5496 c->Request.type_attr_dir = 5497 TYPE_ATTR_DIR(TYPE_CMD, ATTR_SIMPLE, XFER_RSVD); 5498 /* This is technically wrong, and hpsa controllers should 5499 * reject it with CMD_INVALID, which is the most correct 5500 * response, but non-fibre backends appear to let it 5501 * slide by, and give the same results as if this field 5502 * were set correctly. Either way is acceptable for 5503 * our purposes here. 5504 */ 5505 5506 break; 5507 5508 default: 5509 dev_err(&h->pdev->dev, "unknown data direction: %d\n", 5510 cmd->sc_data_direction); 5511 BUG(); 5512 break; 5513 } 5514 5515 if (hpsa_scatter_gather(h, c, cmd) < 0) { /* Fill SG list */ 5516 hpsa_cmd_resolve_and_free(h, c); 5517 return SCSI_MLQUEUE_HOST_BUSY; 5518 } 5519 5520 if (dev->in_reset) { 5521 hpsa_cmd_resolve_and_free(h, c); 5522 return SCSI_MLQUEUE_HOST_BUSY; 5523 } 5524 5525 c->device = dev; 5526 5527 enqueue_cmd_and_start_io(h, c); 5528 /* the cmd'll come back via intr handler in complete_scsi_command() */ 5529 return 0; 5530} 5531 5532static void hpsa_cmd_init(struct ctlr_info *h, int index, 5533 struct CommandList *c) 5534{ 5535 dma_addr_t cmd_dma_handle, err_dma_handle; 5536 5537 /* Zero out all of commandlist except the last field, refcount */ 5538 memset(c, 0, offsetof(struct CommandList, refcount)); 5539 c->Header.tag = cpu_to_le64((u64) (index << DIRECT_LOOKUP_SHIFT)); 5540 cmd_dma_handle = h->cmd_pool_dhandle + index * sizeof(*c); 5541 c->err_info = h->errinfo_pool + index; 5542 memset(c->err_info, 0, sizeof(*c->err_info)); 5543 err_dma_handle = h->errinfo_pool_dhandle 5544 + index * sizeof(*c->err_info); 5545 c->cmdindex = index; 5546 c->busaddr = (u32) cmd_dma_handle; 5547 c->ErrDesc.Addr = cpu_to_le64((u64) err_dma_handle); 5548 c->ErrDesc.Len = cpu_to_le32((u32) sizeof(*c->err_info)); 5549 c->h = h; 5550 c->scsi_cmd = SCSI_CMD_IDLE; 5551} 5552 5553static void hpsa_preinitialize_commands(struct ctlr_info *h) 5554{ 5555 int i; 5556 5557 for (i = 0; i < h->nr_cmds; i++) { 5558 struct CommandList *c = h->cmd_pool + i; 5559 5560 hpsa_cmd_init(h, i, c); 5561 atomic_set(&c->refcount, 0); 5562 } 5563} 5564 5565static inline void hpsa_cmd_partial_init(struct ctlr_info *h, int index, 5566 struct CommandList *c) 5567{ 5568 dma_addr_t cmd_dma_handle = h->cmd_pool_dhandle + index * sizeof(*c); 5569 5570 BUG_ON(c->cmdindex != index); 5571 5572 memset(c->Request.CDB, 0, sizeof(c->Request.CDB)); 5573 memset(c->err_info, 0, sizeof(*c->err_info)); 5574 c->busaddr = (u32) cmd_dma_handle; 5575} 5576 5577static int hpsa_ioaccel_submit(struct ctlr_info *h, 5578 struct CommandList *c, struct scsi_cmnd *cmd) 5579{ 5580 struct hpsa_scsi_dev_t *dev = cmd->device->hostdata; 5581 int rc = IO_ACCEL_INELIGIBLE; 5582 5583 if (!dev) 5584 return SCSI_MLQUEUE_HOST_BUSY; 5585 5586 if (dev->in_reset) 5587 return SCSI_MLQUEUE_HOST_BUSY; 5588 5589 if (hpsa_simple_mode) 5590 return IO_ACCEL_INELIGIBLE; 5591 5592 cmd->host_scribble = (unsigned char *) c; 5593 5594 if (dev->offload_enabled) { 5595 hpsa_cmd_init(h, c->cmdindex, c); 5596 c->cmd_type = CMD_SCSI; 5597 c->scsi_cmd = cmd; 5598 c->device = dev; 5599 rc = hpsa_scsi_ioaccel_raid_map(h, c); 5600 if (rc < 0) /* scsi_dma_map failed. */ 5601 rc = SCSI_MLQUEUE_HOST_BUSY; 5602 } else if (dev->hba_ioaccel_enabled) { 5603 hpsa_cmd_init(h, c->cmdindex, c); 5604 c->cmd_type = CMD_SCSI; 5605 c->scsi_cmd = cmd; 5606 c->device = dev; 5607 rc = hpsa_scsi_ioaccel_direct_map(h, c); 5608 if (rc < 0) /* scsi_dma_map failed. */ 5609 rc = SCSI_MLQUEUE_HOST_BUSY; 5610 } 5611 return rc; 5612} 5613 5614static void hpsa_command_resubmit_worker(struct work_struct *work) 5615{ 5616 struct scsi_cmnd *cmd; 5617 struct hpsa_scsi_dev_t *dev; 5618 struct CommandList *c = container_of(work, struct CommandList, work); 5619 5620 cmd = c->scsi_cmd; 5621 dev = cmd->device->hostdata; 5622 if (!dev) { 5623 cmd->result = DID_NO_CONNECT << 16; 5624 return hpsa_cmd_free_and_done(c->h, c, cmd); 5625 } 5626 5627 if (dev->in_reset) { 5628 cmd->result = DID_RESET << 16; 5629 return hpsa_cmd_free_and_done(c->h, c, cmd); 5630 } 5631 5632 if (c->cmd_type == CMD_IOACCEL2) { 5633 struct ctlr_info *h = c->h; 5634 struct io_accel2_cmd *c2 = &h->ioaccel2_cmd_pool[c->cmdindex]; 5635 int rc; 5636 5637 if (c2->error_data.serv_response == 5638 IOACCEL2_STATUS_SR_TASK_COMP_SET_FULL) { 5639 rc = hpsa_ioaccel_submit(h, c, cmd); 5640 if (rc == 0) 5641 return; 5642 if (rc == SCSI_MLQUEUE_HOST_BUSY) { 5643 /* 5644 * If we get here, it means dma mapping failed. 5645 * Try again via scsi mid layer, which will 5646 * then get SCSI_MLQUEUE_HOST_BUSY. 5647 */ 5648 cmd->result = DID_IMM_RETRY << 16; 5649 return hpsa_cmd_free_and_done(h, c, cmd); 5650 } 5651 /* else, fall thru and resubmit down CISS path */ 5652 } 5653 } 5654 hpsa_cmd_partial_init(c->h, c->cmdindex, c); 5655 if (hpsa_ciss_submit(c->h, c, cmd, dev)) { 5656 /* 5657 * If we get here, it means dma mapping failed. Try 5658 * again via scsi mid layer, which will then get 5659 * SCSI_MLQUEUE_HOST_BUSY. 5660 * 5661 * hpsa_ciss_submit will have already freed c 5662 * if it encountered a dma mapping failure. 5663 */ 5664 cmd->result = DID_IMM_RETRY << 16; 5665 cmd->scsi_done(cmd); 5666 } 5667} 5668 5669/* Running in struct Scsi_Host->host_lock less mode */ 5670static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd) 5671{ 5672 struct ctlr_info *h; 5673 struct hpsa_scsi_dev_t *dev; 5674 struct CommandList *c; 5675 int rc = 0; 5676 5677 /* Get the ptr to our adapter structure out of cmd->host. */ 5678 h = sdev_to_hba(cmd->device); 5679 5680 BUG_ON(cmd->request->tag < 0); 5681 5682 dev = cmd->device->hostdata; 5683 if (!dev) { 5684 cmd->result = DID_NO_CONNECT << 16; 5685 cmd->scsi_done(cmd); 5686 return 0; 5687 } 5688 5689 if (dev->removed) { 5690 cmd->result = DID_NO_CONNECT << 16; 5691 cmd->scsi_done(cmd); 5692 return 0; 5693 } 5694 5695 if (unlikely(lockup_detected(h))) { 5696 cmd->result = DID_NO_CONNECT << 16; 5697 cmd->scsi_done(cmd); 5698 return 0; 5699 } 5700 5701 if (dev->in_reset) 5702 return SCSI_MLQUEUE_DEVICE_BUSY; 5703 5704 c = cmd_tagged_alloc(h, cmd); 5705 if (c == NULL) 5706 return SCSI_MLQUEUE_DEVICE_BUSY; 5707 5708 /* 5709 * This is necessary because the SML doesn't zero out this field during 5710 * error recovery. 5711 */ 5712 cmd->result = 0; 5713 5714 /* 5715 * Call alternate submit routine for I/O accelerated commands. 5716 * Retries always go down the normal I/O path. 5717 */ 5718 if (likely(cmd->retries == 0 && 5719 !blk_rq_is_passthrough(cmd->request) && 5720 h->acciopath_status)) { 5721 rc = hpsa_ioaccel_submit(h, c, cmd); 5722 if (rc == 0) 5723 return 0; 5724 if (rc == SCSI_MLQUEUE_HOST_BUSY) { 5725 hpsa_cmd_resolve_and_free(h, c); 5726 return SCSI_MLQUEUE_HOST_BUSY; 5727 } 5728 } 5729 return hpsa_ciss_submit(h, c, cmd, dev); 5730} 5731 5732static void hpsa_scan_complete(struct ctlr_info *h) 5733{ 5734 unsigned long flags; 5735 5736 spin_lock_irqsave(&h->scan_lock, flags); 5737 h->scan_finished = 1; 5738 wake_up(&h->scan_wait_queue); 5739 spin_unlock_irqrestore(&h->scan_lock, flags); 5740} 5741 5742static void hpsa_scan_start(struct Scsi_Host *sh) 5743{ 5744 struct ctlr_info *h = shost_to_hba(sh); 5745 unsigned long flags; 5746 5747 /* 5748 * Don't let rescans be initiated on a controller known to be locked 5749 * up. If the controller locks up *during* a rescan, that thread is 5750 * probably hosed, but at least we can prevent new rescan threads from 5751 * piling up on a locked up controller. 5752 */ 5753 if (unlikely(lockup_detected(h))) 5754 return hpsa_scan_complete(h); 5755 5756 /* 5757 * If a scan is already waiting to run, no need to add another 5758 */ 5759 spin_lock_irqsave(&h->scan_lock, flags); 5760 if (h->scan_waiting) { 5761 spin_unlock_irqrestore(&h->scan_lock, flags); 5762 return; 5763 } 5764 5765 spin_unlock_irqrestore(&h->scan_lock, flags); 5766 5767 /* wait until any scan already in progress is finished. */ 5768 while (1) { 5769 spin_lock_irqsave(&h->scan_lock, flags); 5770 if (h->scan_finished) 5771 break; 5772 h->scan_waiting = 1; 5773 spin_unlock_irqrestore(&h->scan_lock, flags); 5774 wait_event(h->scan_wait_queue, h->scan_finished); 5775 /* Note: We don't need to worry about a race between this 5776 * thread and driver unload because the midlayer will 5777 * have incremented the reference count, so unload won't 5778 * happen if we're in here. 5779 */ 5780 } 5781 h->scan_finished = 0; /* mark scan as in progress */ 5782 h->scan_waiting = 0; 5783 spin_unlock_irqrestore(&h->scan_lock, flags); 5784 5785 if (unlikely(lockup_detected(h))) 5786 return hpsa_scan_complete(h); 5787 5788 /* 5789 * Do the scan after a reset completion 5790 */ 5791 spin_lock_irqsave(&h->reset_lock, flags); 5792 if (h->reset_in_progress) { 5793 h->drv_req_rescan = 1; 5794 spin_unlock_irqrestore(&h->reset_lock, flags); 5795 hpsa_scan_complete(h); 5796 return; 5797 } 5798 spin_unlock_irqrestore(&h->reset_lock, flags); 5799 5800 hpsa_update_scsi_devices(h); 5801 5802 hpsa_scan_complete(h); 5803} 5804 5805static int hpsa_change_queue_depth(struct scsi_device *sdev, int qdepth) 5806{ 5807 struct hpsa_scsi_dev_t *logical_drive = sdev->hostdata; 5808 5809 if (!logical_drive) 5810 return -ENODEV; 5811 5812 if (qdepth < 1) 5813 qdepth = 1; 5814 else if (qdepth > logical_drive->queue_depth) 5815 qdepth = logical_drive->queue_depth; 5816 5817 return scsi_change_queue_depth(sdev, qdepth); 5818} 5819 5820static int hpsa_scan_finished(struct Scsi_Host *sh, 5821 unsigned long elapsed_time) 5822{ 5823 struct ctlr_info *h = shost_to_hba(sh); 5824 unsigned long flags; 5825 int finished; 5826 5827 spin_lock_irqsave(&h->scan_lock, flags); 5828 finished = h->scan_finished; 5829 spin_unlock_irqrestore(&h->scan_lock, flags); 5830 return finished; 5831} 5832 5833static int hpsa_scsi_host_alloc(struct ctlr_info *h) 5834{ 5835 struct Scsi_Host *sh; 5836 5837 sh = scsi_host_alloc(&hpsa_driver_template, sizeof(struct ctlr_info)); 5838 if (sh == NULL) { 5839 dev_err(&h->pdev->dev, "scsi_host_alloc failed\n"); 5840 return -ENOMEM; 5841 } 5842 5843 sh->io_port = 0; 5844 sh->n_io_port = 0; 5845 sh->this_id = -1; 5846 sh->max_channel = 3; 5847 sh->max_cmd_len = MAX_COMMAND_SIZE; 5848 sh->max_lun = HPSA_MAX_LUN; 5849 sh->max_id = HPSA_MAX_LUN; 5850 sh->can_queue = h->nr_cmds - HPSA_NRESERVED_CMDS; 5851 sh->cmd_per_lun = sh->can_queue; 5852 sh->sg_tablesize = h->maxsgentries; 5853 sh->transportt = hpsa_sas_transport_template; 5854 sh->hostdata[0] = (unsigned long) h; 5855 sh->irq = pci_irq_vector(h->pdev, 0); 5856 sh->unique_id = sh->irq; 5857 5858 h->scsi_host = sh; 5859 return 0; 5860} 5861 5862static int hpsa_scsi_add_host(struct ctlr_info *h) 5863{ 5864 int rv; 5865 5866 rv = scsi_add_host(h->scsi_host, &h->pdev->dev); 5867 if (rv) { 5868 dev_err(&h->pdev->dev, "scsi_add_host failed\n"); 5869 return rv; 5870 } 5871 scsi_scan_host(h->scsi_host); 5872 return 0; 5873} 5874 5875/* 5876 * The block layer has already gone to the trouble of picking out a unique, 5877 * small-integer tag for this request. We use an offset from that value as 5878 * an index to select our command block. (The offset allows us to reserve the 5879 * low-numbered entries for our own uses.) 5880 */ 5881static int hpsa_get_cmd_index(struct scsi_cmnd *scmd) 5882{ 5883 int idx = scmd->request->tag; 5884 5885 if (idx < 0) 5886 return idx; 5887 5888 /* Offset to leave space for internal cmds. */ 5889 return idx += HPSA_NRESERVED_CMDS; 5890} 5891 5892/* 5893 * Send a TEST_UNIT_READY command to the specified LUN using the specified 5894 * reply queue; returns zero if the unit is ready, and non-zero otherwise. 5895 */ 5896static int hpsa_send_test_unit_ready(struct ctlr_info *h, 5897 struct CommandList *c, unsigned char lunaddr[], 5898 int reply_queue) 5899{ 5900 int rc; 5901 5902 /* Send the Test Unit Ready, fill_cmd can't fail, no mapping */ 5903 (void) fill_cmd(c, TEST_UNIT_READY, h, 5904 NULL, 0, 0, lunaddr, TYPE_CMD); 5905 rc = hpsa_scsi_do_simple_cmd(h, c, reply_queue, NO_TIMEOUT); 5906 if (rc) 5907 return rc; 5908 /* no unmap needed here because no data xfer. */ 5909 5910 /* Check if the unit is already ready. */ 5911 if (c->err_info->CommandStatus == CMD_SUCCESS) 5912 return 0; 5913 5914 /* 5915 * The first command sent after reset will receive "unit attention" to 5916 * indicate that the LUN has been reset...this is actually what we're 5917 * looking for (but, success is good too). 5918 */ 5919 if (c->err_info->CommandStatus == CMD_TARGET_STATUS && 5920 c->err_info->ScsiStatus == SAM_STAT_CHECK_CONDITION && 5921 (c->err_info->SenseInfo[2] == NO_SENSE || 5922 c->err_info->SenseInfo[2] == UNIT_ATTENTION)) 5923 return 0; 5924 5925 return 1; 5926} 5927 5928/* 5929 * Wait for a TEST_UNIT_READY command to complete, retrying as necessary; 5930 * returns zero when the unit is ready, and non-zero when giving up. 5931 */ 5932static int hpsa_wait_for_test_unit_ready(struct ctlr_info *h, 5933 struct CommandList *c, 5934 unsigned char lunaddr[], int reply_queue) 5935{ 5936 int rc; 5937 int count = 0; 5938 int waittime = 1; /* seconds */ 5939 5940 /* Send test unit ready until device ready, or give up. */ 5941 for (count = 0; count < HPSA_TUR_RETRY_LIMIT; count++) { 5942 5943 /* 5944 * Wait for a bit. do this first, because if we send 5945 * the TUR right away, the reset will just abort it. 5946 */ 5947 msleep(1000 * waittime); 5948 5949 rc = hpsa_send_test_unit_ready(h, c, lunaddr, reply_queue); 5950 if (!rc) 5951 break; 5952 5953 /* Increase wait time with each try, up to a point. */ 5954 if (waittime < HPSA_MAX_WAIT_INTERVAL_SECS) 5955 waittime *= 2; 5956 5957 dev_warn(&h->pdev->dev, 5958 "waiting %d secs for device to become ready.\n", 5959 waittime); 5960 } 5961 5962 return rc; 5963} 5964 5965static int wait_for_device_to_become_ready(struct ctlr_info *h, 5966 unsigned char lunaddr[], 5967 int reply_queue) 5968{ 5969 int first_queue; 5970 int last_queue; 5971 int rq; 5972 int rc = 0; 5973 struct CommandList *c; 5974 5975 c = cmd_alloc(h); 5976 5977 /* 5978 * If no specific reply queue was requested, then send the TUR 5979 * repeatedly, requesting a reply on each reply queue; otherwise execute 5980 * the loop exactly once using only the specified queue. 5981 */ 5982 if (reply_queue == DEFAULT_REPLY_QUEUE) { 5983 first_queue = 0; 5984 last_queue = h->nreply_queues - 1; 5985 } else { 5986 first_queue = reply_queue; 5987 last_queue = reply_queue; 5988 } 5989 5990 for (rq = first_queue; rq <= last_queue; rq++) { 5991 rc = hpsa_wait_for_test_unit_ready(h, c, lunaddr, rq); 5992 if (rc) 5993 break; 5994 } 5995 5996 if (rc) 5997 dev_warn(&h->pdev->dev, "giving up on device.\n"); 5998 else 5999 dev_warn(&h->pdev->dev, "device is ready.\n"); 6000 6001 cmd_free(h, c); 6002 return rc; 6003} 6004 6005/* Need at least one of these error handlers to keep ../scsi/hosts.c from 6006 * complaining. Doing a host- or bus-reset can't do anything good here. 6007 */ 6008static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd) 6009{ 6010 int rc = SUCCESS; 6011 int i; 6012 struct ctlr_info *h; 6013 struct hpsa_scsi_dev_t *dev = NULL; 6014 u8 reset_type; 6015 char msg[48]; 6016 unsigned long flags; 6017 6018 /* find the controller to which the command to be aborted was sent */ 6019 h = sdev_to_hba(scsicmd->device); 6020 if (h == NULL) /* paranoia */ 6021 return FAILED; 6022 6023 spin_lock_irqsave(&h->reset_lock, flags); 6024 h->reset_in_progress = 1; 6025 spin_unlock_irqrestore(&h->reset_lock, flags); 6026 6027 if (lockup_detected(h)) { 6028 rc = FAILED; 6029 goto return_reset_status; 6030 } 6031 6032 dev = scsicmd->device->hostdata; 6033 if (!dev) { 6034 dev_err(&h->pdev->dev, "%s: device lookup failed\n", __func__); 6035 rc = FAILED; 6036 goto return_reset_status; 6037 } 6038 6039 if (dev->devtype == TYPE_ENCLOSURE) { 6040 rc = SUCCESS; 6041 goto return_reset_status; 6042 } 6043 6044 /* if controller locked up, we can guarantee command won't complete */ 6045 if (lockup_detected(h)) { 6046 snprintf(msg, sizeof(msg), 6047 "cmd %d RESET FAILED, lockup detected", 6048 hpsa_get_cmd_index(scsicmd)); 6049 hpsa_show_dev_msg(KERN_WARNING, h, dev, msg); 6050 rc = FAILED; 6051 goto return_reset_status; 6052 } 6053 6054 /* this reset request might be the result of a lockup; check */ 6055 if (detect_controller_lockup(h)) { 6056 snprintf(msg, sizeof(msg), 6057 "cmd %d RESET FAILED, new lockup detected", 6058 hpsa_get_cmd_index(scsicmd)); 6059 hpsa_show_dev_msg(KERN_WARNING, h, dev, msg); 6060 rc = FAILED; 6061 goto return_reset_status; 6062 } 6063 6064 /* Do not attempt on controller */ 6065 if (is_hba_lunid(dev->scsi3addr)) { 6066 rc = SUCCESS; 6067 goto return_reset_status; 6068 } 6069 6070 if (is_logical_dev_addr_mode(dev->scsi3addr)) 6071 reset_type = HPSA_DEVICE_RESET_MSG; 6072 else 6073 reset_type = HPSA_PHYS_TARGET_RESET; 6074 6075 sprintf(msg, "resetting %s", 6076 reset_type == HPSA_DEVICE_RESET_MSG ? "logical " : "physical "); 6077 hpsa_show_dev_msg(KERN_WARNING, h, dev, msg); 6078 6079 /* 6080 * wait to see if any commands will complete before sending reset 6081 */ 6082 dev->in_reset = true; /* block any new cmds from OS for this device */ 6083 for (i = 0; i < 10; i++) { 6084 if (atomic_read(&dev->commands_outstanding) > 0) 6085 msleep(1000); 6086 else 6087 break; 6088 } 6089 6090 /* send a reset to the SCSI LUN which the command was sent to */ 6091 rc = hpsa_do_reset(h, dev, reset_type, DEFAULT_REPLY_QUEUE); 6092 if (rc == 0) 6093 rc = SUCCESS; 6094 else 6095 rc = FAILED; 6096 6097 sprintf(msg, "reset %s %s", 6098 reset_type == HPSA_DEVICE_RESET_MSG ? "logical " : "physical ", 6099 rc == SUCCESS ? "completed successfully" : "failed"); 6100 hpsa_show_dev_msg(KERN_WARNING, h, dev, msg); 6101 6102return_reset_status: 6103 spin_lock_irqsave(&h->reset_lock, flags); 6104 h->reset_in_progress = 0; 6105 if (dev) 6106 dev->in_reset = false; 6107 spin_unlock_irqrestore(&h->reset_lock, flags); 6108 return rc; 6109} 6110 6111/* 6112 * For operations with an associated SCSI command, a command block is allocated 6113 * at init, and managed by cmd_tagged_alloc() and cmd_tagged_free() using the 6114 * block request tag as an index into a table of entries. cmd_tagged_free() is 6115 * the complement, although cmd_free() may be called instead. 6116 */ 6117static struct CommandList *cmd_tagged_alloc(struct ctlr_info *h, 6118 struct scsi_cmnd *scmd) 6119{ 6120 int idx = hpsa_get_cmd_index(scmd); 6121 struct CommandList *c = h->cmd_pool + idx; 6122 6123 if (idx < HPSA_NRESERVED_CMDS || idx >= h->nr_cmds) { 6124 dev_err(&h->pdev->dev, "Bad block tag: %d not in [%d..%d]\n", 6125 idx, HPSA_NRESERVED_CMDS, h->nr_cmds - 1); 6126 /* The index value comes from the block layer, so if it's out of 6127 * bounds, it's probably not our bug. 6128 */ 6129 BUG(); 6130 } 6131 6132 if (unlikely(!hpsa_is_cmd_idle(c))) { 6133 /* 6134 * We expect that the SCSI layer will hand us a unique tag 6135 * value. Thus, there should never be a collision here between 6136 * two requests...because if the selected command isn't idle 6137 * then someone is going to be very disappointed. 6138 */ 6139 if (idx != h->last_collision_tag) { /* Print once per tag */ 6140 dev_warn(&h->pdev->dev, 6141 "%s: tag collision (tag=%d)\n", __func__, idx); 6142 if (scmd) 6143 scsi_print_command(scmd); 6144 h->last_collision_tag = idx; 6145 } 6146 return NULL; 6147 } 6148 6149 atomic_inc(&c->refcount); 6150 6151 hpsa_cmd_partial_init(h, idx, c); 6152 return c; 6153} 6154 6155static void cmd_tagged_free(struct ctlr_info *h, struct CommandList *c) 6156{ 6157 /* 6158 * Release our reference to the block. We don't need to do anything 6159 * else to free it, because it is accessed by index. 6160 */ 6161 (void)atomic_dec(&c->refcount); 6162} 6163 6164/* 6165 * For operations that cannot sleep, a command block is allocated at init, 6166 * and managed by cmd_alloc() and cmd_free() using a simple bitmap to track 6167 * which ones are free or in use. Lock must be held when calling this. 6168 * cmd_free() is the complement. 6169 * This function never gives up and returns NULL. If it hangs, 6170 * another thread must call cmd_free() to free some tags. 6171 */ 6172 6173static struct CommandList *cmd_alloc(struct ctlr_info *h) 6174{ 6175 struct CommandList *c; 6176 int refcount, i; 6177 int offset = 0; 6178 6179 /* 6180 * There is some *extremely* small but non-zero chance that that 6181 * multiple threads could get in here, and one thread could 6182 * be scanning through the list of bits looking for a free 6183 * one, but the free ones are always behind him, and other 6184 * threads sneak in behind him and eat them before he can 6185 * get to them, so that while there is always a free one, a 6186 * very unlucky thread might be starved anyway, never able to 6187 * beat the other threads. In reality, this happens so 6188 * infrequently as to be indistinguishable from never. 6189 * 6190 * Note that we start allocating commands before the SCSI host structure 6191 * is initialized. Since the search starts at bit zero, this 6192 * all works, since we have at least one command structure available; 6193 * however, it means that the structures with the low indexes have to be 6194 * reserved for driver-initiated requests, while requests from the block 6195 * layer will use the higher indexes. 6196 */ 6197 6198 for (;;) { 6199 i = find_next_zero_bit(h->cmd_pool_bits, 6200 HPSA_NRESERVED_CMDS, 6201 offset); 6202 if (unlikely(i >= HPSA_NRESERVED_CMDS)) { 6203 offset = 0; 6204 continue; 6205 } 6206 c = h->cmd_pool + i; 6207 refcount = atomic_inc_return(&c->refcount); 6208 if (unlikely(refcount > 1)) { 6209 cmd_free(h, c); /* already in use */ 6210 offset = (i + 1) % HPSA_NRESERVED_CMDS; 6211 continue; 6212 } 6213 set_bit(i & (BITS_PER_LONG - 1), 6214 h->cmd_pool_bits + (i / BITS_PER_LONG)); 6215 break; /* it's ours now. */ 6216 } 6217 hpsa_cmd_partial_init(h, i, c); 6218 c->device = NULL; 6219 return c; 6220} 6221 6222/* 6223 * This is the complementary operation to cmd_alloc(). Note, however, in some 6224 * corner cases it may also be used to free blocks allocated by 6225 * cmd_tagged_alloc() in which case the ref-count decrement does the trick and 6226 * the clear-bit is harmless. 6227 */ 6228static void cmd_free(struct ctlr_info *h, struct CommandList *c) 6229{ 6230 if (atomic_dec_and_test(&c->refcount)) { 6231 int i; 6232 6233 i = c - h->cmd_pool; 6234 clear_bit(i & (BITS_PER_LONG - 1), 6235 h->cmd_pool_bits + (i / BITS_PER_LONG)); 6236 } 6237} 6238 6239#ifdef CONFIG_COMPAT 6240 6241static int hpsa_ioctl32_passthru(struct scsi_device *dev, unsigned int cmd, 6242 void __user *arg) 6243{ 6244 struct ctlr_info *h = sdev_to_hba(dev); 6245 IOCTL32_Command_struct __user *arg32 = arg; 6246 IOCTL_Command_struct arg64; 6247 int err; 6248 u32 cp; 6249 6250 if (!arg) 6251 return -EINVAL; 6252 6253 memset(&arg64, 0, sizeof(arg64)); 6254 if (copy_from_user(&arg64, arg32, offsetof(IOCTL_Command_struct, buf))) 6255 return -EFAULT; 6256 if (get_user(cp, &arg32->buf)) 6257 return -EFAULT; 6258 arg64.buf = compat_ptr(cp); 6259 6260 if (atomic_dec_if_positive(&h->passthru_cmds_avail) < 0) 6261 return -EAGAIN; 6262 err = hpsa_passthru_ioctl(h, &arg64); 6263 atomic_inc(&h->passthru_cmds_avail); 6264 if (err) 6265 return err; 6266 if (copy_to_user(&arg32->error_info, &arg64.error_info, 6267 sizeof(arg32->error_info))) 6268 return -EFAULT; 6269 return 0; 6270} 6271 6272static int hpsa_ioctl32_big_passthru(struct scsi_device *dev, 6273 unsigned int cmd, void __user *arg) 6274{ 6275 struct ctlr_info *h = sdev_to_hba(dev); 6276 BIG_IOCTL32_Command_struct __user *arg32 = arg; 6277 BIG_IOCTL_Command_struct arg64; 6278 int err; 6279 u32 cp; 6280 6281 if (!arg) 6282 return -EINVAL; 6283 memset(&arg64, 0, sizeof(arg64)); 6284 if (copy_from_user(&arg64, arg32, 6285 offsetof(BIG_IOCTL32_Command_struct, buf))) 6286 return -EFAULT; 6287 if (get_user(cp, &arg32->buf)) 6288 return -EFAULT; 6289 arg64.buf = compat_ptr(cp); 6290 6291 if (atomic_dec_if_positive(&h->passthru_cmds_avail) < 0) 6292 return -EAGAIN; 6293 err = hpsa_big_passthru_ioctl(h, &arg64); 6294 atomic_inc(&h->passthru_cmds_avail); 6295 if (err) 6296 return err; 6297 if (copy_to_user(&arg32->error_info, &arg64.error_info, 6298 sizeof(arg32->error_info))) 6299 return -EFAULT; 6300 return 0; 6301} 6302 6303static int hpsa_compat_ioctl(struct scsi_device *dev, unsigned int cmd, 6304 void __user *arg) 6305{ 6306 switch (cmd) { 6307 case CCISS_GETPCIINFO: 6308 case CCISS_GETINTINFO: 6309 case CCISS_SETINTINFO: 6310 case CCISS_GETNODENAME: 6311 case CCISS_SETNODENAME: 6312 case CCISS_GETHEARTBEAT: 6313 case CCISS_GETBUSTYPES: 6314 case CCISS_GETFIRMVER: 6315 case CCISS_GETDRIVVER: 6316 case CCISS_REVALIDVOLS: 6317 case CCISS_DEREGDISK: 6318 case CCISS_REGNEWDISK: 6319 case CCISS_REGNEWD: 6320 case CCISS_RESCANDISK: 6321 case CCISS_GETLUNINFO: 6322 return hpsa_ioctl(dev, cmd, arg); 6323 6324 case CCISS_PASSTHRU32: 6325 return hpsa_ioctl32_passthru(dev, cmd, arg); 6326 case CCISS_BIG_PASSTHRU32: 6327 return hpsa_ioctl32_big_passthru(dev, cmd, arg); 6328 6329 default: 6330 return -ENOIOCTLCMD; 6331 } 6332} 6333#endif 6334 6335static int hpsa_getpciinfo_ioctl(struct ctlr_info *h, void __user *argp) 6336{ 6337 struct hpsa_pci_info pciinfo; 6338 6339 if (!argp) 6340 return -EINVAL; 6341 pciinfo.domain = pci_domain_nr(h->pdev->bus); 6342 pciinfo.bus = h->pdev->bus->number; 6343 pciinfo.dev_fn = h->pdev->devfn; 6344 pciinfo.board_id = h->board_id; 6345 if (copy_to_user(argp, &pciinfo, sizeof(pciinfo))) 6346 return -EFAULT; 6347 return 0; 6348} 6349 6350static int hpsa_getdrivver_ioctl(struct ctlr_info *h, void __user *argp) 6351{ 6352 DriverVer_type DriverVer; 6353 unsigned char vmaj, vmin, vsubmin; 6354 int rc; 6355 6356 rc = sscanf(HPSA_DRIVER_VERSION, "%hhu.%hhu.%hhu", 6357 &vmaj, &vmin, &vsubmin); 6358 if (rc != 3) { 6359 dev_info(&h->pdev->dev, "driver version string '%s' " 6360 "unrecognized.", HPSA_DRIVER_VERSION); 6361 vmaj = 0; 6362 vmin = 0; 6363 vsubmin = 0; 6364 } 6365 DriverVer = (vmaj << 16) | (vmin << 8) | vsubmin; 6366 if (!argp) 6367 return -EINVAL; 6368 if (copy_to_user(argp, &DriverVer, sizeof(DriverVer_type))) 6369 return -EFAULT; 6370 return 0; 6371} 6372 6373static int hpsa_passthru_ioctl(struct ctlr_info *h, 6374 IOCTL_Command_struct *iocommand) 6375{ 6376 struct CommandList *c; 6377 char *buff = NULL; 6378 u64 temp64; 6379 int rc = 0; 6380 6381 if (!capable(CAP_SYS_RAWIO)) 6382 return -EPERM; 6383 if ((iocommand->buf_size < 1) && 6384 (iocommand->Request.Type.Direction != XFER_NONE)) { 6385 return -EINVAL; 6386 } 6387 if (iocommand->buf_size > 0) { 6388 buff = kmalloc(iocommand->buf_size, GFP_KERNEL); 6389 if (buff == NULL) 6390 return -ENOMEM; 6391 if (iocommand->Request.Type.Direction & XFER_WRITE) { 6392 /* Copy the data into the buffer we created */ 6393 if (copy_from_user(buff, iocommand->buf, 6394 iocommand->buf_size)) { 6395 rc = -EFAULT; 6396 goto out_kfree; 6397 } 6398 } else { 6399 memset(buff, 0, iocommand->buf_size); 6400 } 6401 } 6402 c = cmd_alloc(h); 6403 6404 /* Fill in the command type */ 6405 c->cmd_type = CMD_IOCTL_PEND; 6406 c->scsi_cmd = SCSI_CMD_BUSY; 6407 /* Fill in Command Header */ 6408 c->Header.ReplyQueue = 0; /* unused in simple mode */ 6409 if (iocommand->buf_size > 0) { /* buffer to fill */ 6410 c->Header.SGList = 1; 6411 c->Header.SGTotal = cpu_to_le16(1); 6412 } else { /* no buffers to fill */ 6413 c->Header.SGList = 0; 6414 c->Header.SGTotal = cpu_to_le16(0); 6415 } 6416 memcpy(&c->Header.LUN, &iocommand->LUN_info, sizeof(c->Header.LUN)); 6417 6418 /* Fill in Request block */ 6419 memcpy(&c->Request, &iocommand->Request, 6420 sizeof(c->Request)); 6421 6422 /* Fill in the scatter gather information */ 6423 if (iocommand->buf_size > 0) { 6424 temp64 = dma_map_single(&h->pdev->dev, buff, 6425 iocommand->buf_size, DMA_BIDIRECTIONAL); 6426 if (dma_mapping_error(&h->pdev->dev, (dma_addr_t) temp64)) { 6427 c->SG[0].Addr = cpu_to_le64(0); 6428 c->SG[0].Len = cpu_to_le32(0); 6429 rc = -ENOMEM; 6430 goto out; 6431 } 6432 c->SG[0].Addr = cpu_to_le64(temp64); 6433 c->SG[0].Len = cpu_to_le32(iocommand->buf_size); 6434 c->SG[0].Ext = cpu_to_le32(HPSA_SG_LAST); /* not chaining */ 6435 } 6436 rc = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE, 6437 NO_TIMEOUT); 6438 if (iocommand->buf_size > 0) 6439 hpsa_pci_unmap(h->pdev, c, 1, DMA_BIDIRECTIONAL); 6440 check_ioctl_unit_attention(h, c); 6441 if (rc) { 6442 rc = -EIO; 6443 goto out; 6444 } 6445 6446 /* Copy the error information out */ 6447 memcpy(&iocommand->error_info, c->err_info, 6448 sizeof(iocommand->error_info)); 6449 if ((iocommand->Request.Type.Direction & XFER_READ) && 6450 iocommand->buf_size > 0) { 6451 /* Copy the data out of the buffer we created */ 6452 if (copy_to_user(iocommand->buf, buff, iocommand->buf_size)) { 6453 rc = -EFAULT; 6454 goto out; 6455 } 6456 } 6457out: 6458 cmd_free(h, c); 6459out_kfree: 6460 kfree(buff); 6461 return rc; 6462} 6463 6464static int hpsa_big_passthru_ioctl(struct ctlr_info *h, 6465 BIG_IOCTL_Command_struct *ioc) 6466{ 6467 struct CommandList *c; 6468 unsigned char **buff = NULL; 6469 int *buff_size = NULL; 6470 u64 temp64; 6471 BYTE sg_used = 0; 6472 int status = 0; 6473 u32 left; 6474 u32 sz; 6475 BYTE __user *data_ptr; 6476 6477 if (!capable(CAP_SYS_RAWIO)) 6478 return -EPERM; 6479 6480 if ((ioc->buf_size < 1) && 6481 (ioc->Request.Type.Direction != XFER_NONE)) 6482 return -EINVAL; 6483 /* Check kmalloc limits using all SGs */ 6484 if (ioc->malloc_size > MAX_KMALLOC_SIZE) 6485 return -EINVAL; 6486 if (ioc->buf_size > ioc->malloc_size * SG_ENTRIES_IN_CMD) 6487 return -EINVAL; 6488 buff = kcalloc(SG_ENTRIES_IN_CMD, sizeof(char *), GFP_KERNEL); 6489 if (!buff) { 6490 status = -ENOMEM; 6491 goto cleanup1; 6492 } 6493 buff_size = kmalloc_array(SG_ENTRIES_IN_CMD, sizeof(int), GFP_KERNEL); 6494 if (!buff_size) { 6495 status = -ENOMEM; 6496 goto cleanup1; 6497 } 6498 left = ioc->buf_size; 6499 data_ptr = ioc->buf; 6500 while (left) { 6501 sz = (left > ioc->malloc_size) ? ioc->malloc_size : left; 6502 buff_size[sg_used] = sz; 6503 buff[sg_used] = kmalloc(sz, GFP_KERNEL); 6504 if (buff[sg_used] == NULL) { 6505 status = -ENOMEM; 6506 goto cleanup1; 6507 } 6508 if (ioc->Request.Type.Direction & XFER_WRITE) { 6509 if (copy_from_user(buff[sg_used], data_ptr, sz)) { 6510 status = -EFAULT; 6511 goto cleanup1; 6512 } 6513 } else 6514 memset(buff[sg_used], 0, sz); 6515 left -= sz; 6516 data_ptr += sz; 6517 sg_used++; 6518 } 6519 c = cmd_alloc(h); 6520 6521 c->cmd_type = CMD_IOCTL_PEND; 6522 c->scsi_cmd = SCSI_CMD_BUSY; 6523 c->Header.ReplyQueue = 0; 6524 c->Header.SGList = (u8) sg_used; 6525 c->Header.SGTotal = cpu_to_le16(sg_used); 6526 memcpy(&c->Header.LUN, &ioc->LUN_info, sizeof(c->Header.LUN)); 6527 memcpy(&c->Request, &ioc->Request, sizeof(c->Request)); 6528 if (ioc->buf_size > 0) { 6529 int i; 6530 for (i = 0; i < sg_used; i++) { 6531 temp64 = dma_map_single(&h->pdev->dev, buff[i], 6532 buff_size[i], DMA_BIDIRECTIONAL); 6533 if (dma_mapping_error(&h->pdev->dev, 6534 (dma_addr_t) temp64)) { 6535 c->SG[i].Addr = cpu_to_le64(0); 6536 c->SG[i].Len = cpu_to_le32(0); 6537 hpsa_pci_unmap(h->pdev, c, i, 6538 DMA_BIDIRECTIONAL); 6539 status = -ENOMEM; 6540 goto cleanup0; 6541 } 6542 c->SG[i].Addr = cpu_to_le64(temp64); 6543 c->SG[i].Len = cpu_to_le32(buff_size[i]); 6544 c->SG[i].Ext = cpu_to_le32(0); 6545 } 6546 c->SG[--i].Ext = cpu_to_le32(HPSA_SG_LAST); 6547 } 6548 status = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE, 6549 NO_TIMEOUT); 6550 if (sg_used) 6551 hpsa_pci_unmap(h->pdev, c, sg_used, DMA_BIDIRECTIONAL); 6552 check_ioctl_unit_attention(h, c); 6553 if (status) { 6554 status = -EIO; 6555 goto cleanup0; 6556 } 6557 6558 /* Copy the error information out */ 6559 memcpy(&ioc->error_info, c->err_info, sizeof(ioc->error_info)); 6560 if ((ioc->Request.Type.Direction & XFER_READ) && ioc->buf_size > 0) { 6561 int i; 6562 6563 /* Copy the data out of the buffer we created */ 6564 BYTE __user *ptr = ioc->buf; 6565 for (i = 0; i < sg_used; i++) { 6566 if (copy_to_user(ptr, buff[i], buff_size[i])) { 6567 status = -EFAULT; 6568 goto cleanup0; 6569 } 6570 ptr += buff_size[i]; 6571 } 6572 } 6573 status = 0; 6574cleanup0: 6575 cmd_free(h, c); 6576cleanup1: 6577 if (buff) { 6578 int i; 6579 6580 for (i = 0; i < sg_used; i++) 6581 kfree(buff[i]); 6582 kfree(buff); 6583 } 6584 kfree(buff_size); 6585 return status; 6586} 6587 6588static void check_ioctl_unit_attention(struct ctlr_info *h, 6589 struct CommandList *c) 6590{ 6591 if (c->err_info->CommandStatus == CMD_TARGET_STATUS && 6592 c->err_info->ScsiStatus != SAM_STAT_CHECK_CONDITION) 6593 (void) check_for_unit_attention(h, c); 6594} 6595 6596/* 6597 * ioctl 6598 */ 6599static int hpsa_ioctl(struct scsi_device *dev, unsigned int cmd, 6600 void __user *argp) 6601{ 6602 struct ctlr_info *h = sdev_to_hba(dev); 6603 int rc; 6604 6605 switch (cmd) { 6606 case CCISS_DEREGDISK: 6607 case CCISS_REGNEWDISK: 6608 case CCISS_REGNEWD: 6609 hpsa_scan_start(h->scsi_host); 6610 return 0; 6611 case CCISS_GETPCIINFO: 6612 return hpsa_getpciinfo_ioctl(h, argp); 6613 case CCISS_GETDRIVVER: 6614 return hpsa_getdrivver_ioctl(h, argp); 6615 case CCISS_PASSTHRU: { 6616 IOCTL_Command_struct iocommand; 6617 6618 if (!argp) 6619 return -EINVAL; 6620 if (copy_from_user(&iocommand, argp, sizeof(iocommand))) 6621 return -EFAULT; 6622 if (atomic_dec_if_positive(&h->passthru_cmds_avail) < 0) 6623 return -EAGAIN; 6624 rc = hpsa_passthru_ioctl(h, &iocommand); 6625 atomic_inc(&h->passthru_cmds_avail); 6626 if (!rc && copy_to_user(argp, &iocommand, sizeof(iocommand))) 6627 rc = -EFAULT; 6628 return rc; 6629 } 6630 case CCISS_BIG_PASSTHRU: { 6631 BIG_IOCTL_Command_struct ioc; 6632 if (!argp) 6633 return -EINVAL; 6634 if (copy_from_user(&ioc, argp, sizeof(ioc))) 6635 return -EFAULT; 6636 if (atomic_dec_if_positive(&h->passthru_cmds_avail) < 0) 6637 return -EAGAIN; 6638 rc = hpsa_big_passthru_ioctl(h, &ioc); 6639 atomic_inc(&h->passthru_cmds_avail); 6640 if (!rc && copy_to_user(argp, &ioc, sizeof(ioc))) 6641 rc = -EFAULT; 6642 return rc; 6643 } 6644 default: 6645 return -ENOTTY; 6646 } 6647} 6648 6649static void hpsa_send_host_reset(struct ctlr_info *h, u8 reset_type) 6650{ 6651 struct CommandList *c; 6652 6653 c = cmd_alloc(h); 6654 6655 /* fill_cmd can't fail here, no data buffer to map */ 6656 (void) fill_cmd(c, HPSA_DEVICE_RESET_MSG, h, NULL, 0, 0, 6657 RAID_CTLR_LUNID, TYPE_MSG); 6658 c->Request.CDB[1] = reset_type; /* fill_cmd defaults to target reset */ 6659 c->waiting = NULL; 6660 enqueue_cmd_and_start_io(h, c); 6661 /* Don't wait for completion, the reset won't complete. Don't free 6662 * the command either. This is the last command we will send before 6663 * re-initializing everything, so it doesn't matter and won't leak. 6664 */ 6665 return; 6666} 6667 6668static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h, 6669 void *buff, size_t size, u16 page_code, unsigned char *scsi3addr, 6670 int cmd_type) 6671{ 6672 enum dma_data_direction dir = DMA_NONE; 6673 6674 c->cmd_type = CMD_IOCTL_PEND; 6675 c->scsi_cmd = SCSI_CMD_BUSY; 6676 c->Header.ReplyQueue = 0; 6677 if (buff != NULL && size > 0) { 6678 c->Header.SGList = 1; 6679 c->Header.SGTotal = cpu_to_le16(1); 6680 } else { 6681 c->Header.SGList = 0; 6682 c->Header.SGTotal = cpu_to_le16(0); 6683 } 6684 memcpy(c->Header.LUN.LunAddrBytes, scsi3addr, 8); 6685 6686 if (cmd_type == TYPE_CMD) { 6687 switch (cmd) { 6688 case HPSA_INQUIRY: 6689 /* are we trying to read a vital product page */ 6690 if (page_code & VPD_PAGE) { 6691 c->Request.CDB[1] = 0x01; 6692 c->Request.CDB[2] = (page_code & 0xff); 6693 } 6694 c->Request.CDBLen = 6; 6695 c->Request.type_attr_dir = 6696 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ); 6697 c->Request.Timeout = 0; 6698 c->Request.CDB[0] = HPSA_INQUIRY; 6699 c->Request.CDB[4] = size & 0xFF; 6700 break; 6701 case RECEIVE_DIAGNOSTIC: 6702 c->Request.CDBLen = 6; 6703 c->Request.type_attr_dir = 6704 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ); 6705 c->Request.Timeout = 0; 6706 c->Request.CDB[0] = cmd; 6707 c->Request.CDB[1] = 1; 6708 c->Request.CDB[2] = 1; 6709 c->Request.CDB[3] = (size >> 8) & 0xFF; 6710 c->Request.CDB[4] = size & 0xFF; 6711 break; 6712 case HPSA_REPORT_LOG: 6713 case HPSA_REPORT_PHYS: 6714 /* Talking to controller so It's a physical command 6715 mode = 00 target = 0. Nothing to write. 6716 */ 6717 c->Request.CDBLen = 12; 6718 c->Request.type_attr_dir = 6719 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ); 6720 c->Request.Timeout = 0; 6721 c->Request.CDB[0] = cmd; 6722 c->Request.CDB[6] = (size >> 24) & 0xFF; /* MSB */ 6723 c->Request.CDB[7] = (size >> 16) & 0xFF; 6724 c->Request.CDB[8] = (size >> 8) & 0xFF; 6725 c->Request.CDB[9] = size & 0xFF; 6726 break; 6727 case BMIC_SENSE_DIAG_OPTIONS: 6728 c->Request.CDBLen = 16; 6729 c->Request.type_attr_dir = 6730 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ); 6731 c->Request.Timeout = 0; 6732 /* Spec says this should be BMIC_WRITE */ 6733 c->Request.CDB[0] = BMIC_READ; 6734 c->Request.CDB[6] = BMIC_SENSE_DIAG_OPTIONS; 6735 break; 6736 case BMIC_SET_DIAG_OPTIONS: 6737 c->Request.CDBLen = 16; 6738 c->Request.type_attr_dir = 6739 TYPE_ATTR_DIR(cmd_type, 6740 ATTR_SIMPLE, XFER_WRITE); 6741 c->Request.Timeout = 0; 6742 c->Request.CDB[0] = BMIC_WRITE; 6743 c->Request.CDB[6] = BMIC_SET_DIAG_OPTIONS; 6744 break; 6745 case HPSA_CACHE_FLUSH: 6746 c->Request.CDBLen = 12; 6747 c->Request.type_attr_dir = 6748 TYPE_ATTR_DIR(cmd_type, 6749 ATTR_SIMPLE, XFER_WRITE); 6750 c->Request.Timeout = 0; 6751 c->Request.CDB[0] = BMIC_WRITE; 6752 c->Request.CDB[6] = BMIC_CACHE_FLUSH; 6753 c->Request.CDB[7] = (size >> 8) & 0xFF; 6754 c->Request.CDB[8] = size & 0xFF; 6755 break; 6756 case TEST_UNIT_READY: 6757 c->Request.CDBLen = 6; 6758 c->Request.type_attr_dir = 6759 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_NONE); 6760 c->Request.Timeout = 0; 6761 break; 6762 case HPSA_GET_RAID_MAP: 6763 c->Request.CDBLen = 12; 6764 c->Request.type_attr_dir = 6765 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ); 6766 c->Request.Timeout = 0; 6767 c->Request.CDB[0] = HPSA_CISS_READ; 6768 c->Request.CDB[1] = cmd; 6769 c->Request.CDB[6] = (size >> 24) & 0xFF; /* MSB */ 6770 c->Request.CDB[7] = (size >> 16) & 0xFF; 6771 c->Request.CDB[8] = (size >> 8) & 0xFF; 6772 c->Request.CDB[9] = size & 0xFF; 6773 break; 6774 case BMIC_SENSE_CONTROLLER_PARAMETERS: 6775 c->Request.CDBLen = 10; 6776 c->Request.type_attr_dir = 6777 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ); 6778 c->Request.Timeout = 0; 6779 c->Request.CDB[0] = BMIC_READ; 6780 c->Request.CDB[6] = BMIC_SENSE_CONTROLLER_PARAMETERS; 6781 c->Request.CDB[7] = (size >> 16) & 0xFF; 6782 c->Request.CDB[8] = (size >> 8) & 0xFF; 6783 break; 6784 case BMIC_IDENTIFY_PHYSICAL_DEVICE: 6785 c->Request.CDBLen = 10; 6786 c->Request.type_attr_dir = 6787 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ); 6788 c->Request.Timeout = 0; 6789 c->Request.CDB[0] = BMIC_READ; 6790 c->Request.CDB[6] = BMIC_IDENTIFY_PHYSICAL_DEVICE; 6791 c->Request.CDB[7] = (size >> 16) & 0xFF; 6792 c->Request.CDB[8] = (size >> 8) & 0XFF; 6793 break; 6794 case BMIC_SENSE_SUBSYSTEM_INFORMATION: 6795 c->Request.CDBLen = 10; 6796 c->Request.type_attr_dir = 6797 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ); 6798 c->Request.Timeout = 0; 6799 c->Request.CDB[0] = BMIC_READ; 6800 c->Request.CDB[6] = BMIC_SENSE_SUBSYSTEM_INFORMATION; 6801 c->Request.CDB[7] = (size >> 16) & 0xFF; 6802 c->Request.CDB[8] = (size >> 8) & 0XFF; 6803 break; 6804 case BMIC_SENSE_STORAGE_BOX_PARAMS: 6805 c->Request.CDBLen = 10; 6806 c->Request.type_attr_dir = 6807 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ); 6808 c->Request.Timeout = 0; 6809 c->Request.CDB[0] = BMIC_READ; 6810 c->Request.CDB[6] = BMIC_SENSE_STORAGE_BOX_PARAMS; 6811 c->Request.CDB[7] = (size >> 16) & 0xFF; 6812 c->Request.CDB[8] = (size >> 8) & 0XFF; 6813 break; 6814 case BMIC_IDENTIFY_CONTROLLER: 6815 c->Request.CDBLen = 10; 6816 c->Request.type_attr_dir = 6817 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ); 6818 c->Request.Timeout = 0; 6819 c->Request.CDB[0] = BMIC_READ; 6820 c->Request.CDB[1] = 0; 6821 c->Request.CDB[2] = 0; 6822 c->Request.CDB[3] = 0; 6823 c->Request.CDB[4] = 0; 6824 c->Request.CDB[5] = 0; 6825 c->Request.CDB[6] = BMIC_IDENTIFY_CONTROLLER; 6826 c->Request.CDB[7] = (size >> 16) & 0xFF; 6827 c->Request.CDB[8] = (size >> 8) & 0XFF; 6828 c->Request.CDB[9] = 0; 6829 break; 6830 default: 6831 dev_warn(&h->pdev->dev, "unknown command 0x%c\n", cmd); 6832 BUG(); 6833 } 6834 } else if (cmd_type == TYPE_MSG) { 6835 switch (cmd) { 6836 6837 case HPSA_PHYS_TARGET_RESET: 6838 c->Request.CDBLen = 16; 6839 c->Request.type_attr_dir = 6840 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_NONE); 6841 c->Request.Timeout = 0; /* Don't time out */ 6842 memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB)); 6843 c->Request.CDB[0] = HPSA_RESET; 6844 c->Request.CDB[1] = HPSA_TARGET_RESET_TYPE; 6845 /* Physical target reset needs no control bytes 4-7*/ 6846 c->Request.CDB[4] = 0x00; 6847 c->Request.CDB[5] = 0x00; 6848 c->Request.CDB[6] = 0x00; 6849 c->Request.CDB[7] = 0x00; 6850 break; 6851 case HPSA_DEVICE_RESET_MSG: 6852 c->Request.CDBLen = 16; 6853 c->Request.type_attr_dir = 6854 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_NONE); 6855 c->Request.Timeout = 0; /* Don't time out */ 6856 memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB)); 6857 c->Request.CDB[0] = cmd; 6858 c->Request.CDB[1] = HPSA_RESET_TYPE_LUN; 6859 /* If bytes 4-7 are zero, it means reset the */ 6860 /* LunID device */ 6861 c->Request.CDB[4] = 0x00; 6862 c->Request.CDB[5] = 0x00; 6863 c->Request.CDB[6] = 0x00; 6864 c->Request.CDB[7] = 0x00; 6865 break; 6866 default: 6867 dev_warn(&h->pdev->dev, "unknown message type %d\n", 6868 cmd); 6869 BUG(); 6870 } 6871 } else { 6872 dev_warn(&h->pdev->dev, "unknown command type %d\n", cmd_type); 6873 BUG(); 6874 } 6875 6876 switch (GET_DIR(c->Request.type_attr_dir)) { 6877 case XFER_READ: 6878 dir = DMA_FROM_DEVICE; 6879 break; 6880 case XFER_WRITE: 6881 dir = DMA_TO_DEVICE; 6882 break; 6883 case XFER_NONE: 6884 dir = DMA_NONE; 6885 break; 6886 default: 6887 dir = DMA_BIDIRECTIONAL; 6888 } 6889 if (hpsa_map_one(h->pdev, c, buff, size, dir)) 6890 return -1; 6891 return 0; 6892} 6893 6894/* 6895 * Map (physical) PCI mem into (virtual) kernel space 6896 */ 6897static void __iomem *remap_pci_mem(ulong base, ulong size) 6898{ 6899 ulong page_base = ((ulong) base) & PAGE_MASK; 6900 ulong page_offs = ((ulong) base) - page_base; 6901 void __iomem *page_remapped = ioremap(page_base, 6902 page_offs + size); 6903 6904 return page_remapped ? (page_remapped + page_offs) : NULL; 6905} 6906 6907static inline unsigned long get_next_completion(struct ctlr_info *h, u8 q) 6908{ 6909 return h->access.command_completed(h, q); 6910} 6911 6912static inline bool interrupt_pending(struct ctlr_info *h) 6913{ 6914 return h->access.intr_pending(h); 6915} 6916 6917static inline long interrupt_not_for_us(struct ctlr_info *h) 6918{ 6919 return (h->access.intr_pending(h) == 0) || 6920 (h->interrupts_enabled == 0); 6921} 6922 6923static inline int bad_tag(struct ctlr_info *h, u32 tag_index, 6924 u32 raw_tag) 6925{ 6926 if (unlikely(tag_index >= h->nr_cmds)) { 6927 dev_warn(&h->pdev->dev, "bad tag 0x%08x ignored.\n", raw_tag); 6928 return 1; 6929 } 6930 return 0; 6931} 6932 6933static inline void finish_cmd(struct CommandList *c) 6934{ 6935 dial_up_lockup_detection_on_fw_flash_complete(c->h, c); 6936 if (likely(c->cmd_type == CMD_IOACCEL1 || c->cmd_type == CMD_SCSI 6937 || c->cmd_type == CMD_IOACCEL2)) 6938 complete_scsi_command(c); 6939 else if (c->cmd_type == CMD_IOCTL_PEND || c->cmd_type == IOACCEL2_TMF) 6940 complete(c->waiting); 6941} 6942 6943/* process completion of an indexed ("direct lookup") command */ 6944static inline void process_indexed_cmd(struct ctlr_info *h, 6945 u32 raw_tag) 6946{ 6947 u32 tag_index; 6948 struct CommandList *c; 6949 6950 tag_index = raw_tag >> DIRECT_LOOKUP_SHIFT; 6951 if (!bad_tag(h, tag_index, raw_tag)) { 6952 c = h->cmd_pool + tag_index; 6953 finish_cmd(c); 6954 } 6955} 6956 6957/* Some controllers, like p400, will give us one interrupt 6958 * after a soft reset, even if we turned interrupts off. 6959 * Only need to check for this in the hpsa_xxx_discard_completions 6960 * functions. 6961 */ 6962static int ignore_bogus_interrupt(struct ctlr_info *h) 6963{ 6964 if (likely(!reset_devices)) 6965 return 0; 6966 6967 if (likely(h->interrupts_enabled)) 6968 return 0; 6969 6970 dev_info(&h->pdev->dev, "Received interrupt while interrupts disabled " 6971 "(known firmware bug.) Ignoring.\n"); 6972 6973 return 1; 6974} 6975 6976/* 6977 * Convert &h->q[x] (passed to interrupt handlers) back to h. 6978 * Relies on (h-q[x] == x) being true for x such that 6979 * 0 <= x < MAX_REPLY_QUEUES. 6980 */ 6981static struct ctlr_info *queue_to_hba(u8 *queue) 6982{ 6983 return container_of((queue - *queue), struct ctlr_info, q[0]); 6984} 6985 6986static irqreturn_t hpsa_intx_discard_completions(int irq, void *queue) 6987{ 6988 struct ctlr_info *h = queue_to_hba(queue); 6989 u8 q = *(u8 *) queue; 6990 u32 raw_tag; 6991 6992 if (ignore_bogus_interrupt(h)) 6993 return IRQ_NONE; 6994 6995 if (interrupt_not_for_us(h)) 6996 return IRQ_NONE; 6997 h->last_intr_timestamp = get_jiffies_64(); 6998 while (interrupt_pending(h)) { 6999 raw_tag = get_next_completion(h, q); 7000 while (raw_tag != FIFO_EMPTY) 7001 raw_tag = next_command(h, q); 7002 } 7003 return IRQ_HANDLED; 7004} 7005 7006static irqreturn_t hpsa_msix_discard_completions(int irq, void *queue) 7007{ 7008 struct ctlr_info *h = queue_to_hba(queue); 7009 u32 raw_tag; 7010 u8 q = *(u8 *) queue; 7011 7012 if (ignore_bogus_interrupt(h)) 7013 return IRQ_NONE; 7014 7015 h->last_intr_timestamp = get_jiffies_64(); 7016 raw_tag = get_next_completion(h, q); 7017 while (raw_tag != FIFO_EMPTY) 7018 raw_tag = next_command(h, q); 7019 return IRQ_HANDLED; 7020} 7021 7022static irqreturn_t do_hpsa_intr_intx(int irq, void *queue) 7023{ 7024 struct ctlr_info *h = queue_to_hba((u8 *) queue); 7025 u32 raw_tag; 7026 u8 q = *(u8 *) queue; 7027 7028 if (interrupt_not_for_us(h)) 7029 return IRQ_NONE; 7030 h->last_intr_timestamp = get_jiffies_64(); 7031 while (interrupt_pending(h)) { 7032 raw_tag = get_next_completion(h, q); 7033 while (raw_tag != FIFO_EMPTY) { 7034 process_indexed_cmd(h, raw_tag); 7035 raw_tag = next_command(h, q); 7036 } 7037 } 7038 return IRQ_HANDLED; 7039} 7040 7041static irqreturn_t do_hpsa_intr_msi(int irq, void *queue) 7042{ 7043 struct ctlr_info *h = queue_to_hba(queue); 7044 u32 raw_tag; 7045 u8 q = *(u8 *) queue; 7046 7047 h->last_intr_timestamp = get_jiffies_64(); 7048 raw_tag = get_next_completion(h, q); 7049 while (raw_tag != FIFO_EMPTY) { 7050 process_indexed_cmd(h, raw_tag); 7051 raw_tag = next_command(h, q); 7052 } 7053 return IRQ_HANDLED; 7054} 7055 7056/* Send a message CDB to the firmware. Careful, this only works 7057 * in simple mode, not performant mode due to the tag lookup. 7058 * We only ever use this immediately after a controller reset. 7059 */ 7060static int hpsa_message(struct pci_dev *pdev, unsigned char opcode, 7061 unsigned char type) 7062{ 7063 struct Command { 7064 struct CommandListHeader CommandHeader; 7065 struct RequestBlock Request; 7066 struct ErrDescriptor ErrorDescriptor; 7067 }; 7068 struct Command *cmd; 7069 static const size_t cmd_sz = sizeof(*cmd) + 7070 sizeof(cmd->ErrorDescriptor); 7071 dma_addr_t paddr64; 7072 __le32 paddr32; 7073 u32 tag; 7074 void __iomem *vaddr; 7075 int i, err; 7076 7077 vaddr = pci_ioremap_bar(pdev, 0); 7078 if (vaddr == NULL) 7079 return -ENOMEM; 7080 7081 /* The Inbound Post Queue only accepts 32-bit physical addresses for the 7082 * CCISS commands, so they must be allocated from the lower 4GiB of 7083 * memory. 7084 */ 7085 err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); 7086 if (err) { 7087 iounmap(vaddr); 7088 return err; 7089 } 7090 7091 cmd = dma_alloc_coherent(&pdev->dev, cmd_sz, &paddr64, GFP_KERNEL); 7092 if (cmd == NULL) { 7093 iounmap(vaddr); 7094 return -ENOMEM; 7095 } 7096 7097 /* This must fit, because of the 32-bit consistent DMA mask. Also, 7098 * although there's no guarantee, we assume that the address is at 7099 * least 4-byte aligned (most likely, it's page-aligned). 7100 */ 7101 paddr32 = cpu_to_le32(paddr64); 7102 7103 cmd->CommandHeader.ReplyQueue = 0; 7104 cmd->CommandHeader.SGList = 0; 7105 cmd->CommandHeader.SGTotal = cpu_to_le16(0); 7106 cmd->CommandHeader.tag = cpu_to_le64(paddr64); 7107 memset(&cmd->CommandHeader.LUN.LunAddrBytes, 0, 8); 7108 7109 cmd->Request.CDBLen = 16; 7110 cmd->Request.type_attr_dir = 7111 TYPE_ATTR_DIR(TYPE_MSG, ATTR_HEADOFQUEUE, XFER_NONE); 7112 cmd->Request.Timeout = 0; /* Don't time out */ 7113 cmd->Request.CDB[0] = opcode; 7114 cmd->Request.CDB[1] = type; 7115 memset(&cmd->Request.CDB[2], 0, 14); /* rest of the CDB is reserved */ 7116 cmd->ErrorDescriptor.Addr = 7117 cpu_to_le64((le32_to_cpu(paddr32) + sizeof(*cmd))); 7118 cmd->ErrorDescriptor.Len = cpu_to_le32(sizeof(struct ErrorInfo)); 7119 7120 writel(le32_to_cpu(paddr32), vaddr + SA5_REQUEST_PORT_OFFSET); 7121 7122 for (i = 0; i < HPSA_MSG_SEND_RETRY_LIMIT; i++) { 7123 tag = readl(vaddr + SA5_REPLY_PORT_OFFSET); 7124 if ((tag & ~HPSA_SIMPLE_ERROR_BITS) == paddr64) 7125 break; 7126 msleep(HPSA_MSG_SEND_RETRY_INTERVAL_MSECS); 7127 } 7128 7129 iounmap(vaddr); 7130 7131 /* we leak the DMA buffer here ... no choice since the controller could 7132 * still complete the command. 7133 */ 7134 if (i == HPSA_MSG_SEND_RETRY_LIMIT) { 7135 dev_err(&pdev->dev, "controller message %02x:%02x timed out\n", 7136 opcode, type); 7137 return -ETIMEDOUT; 7138 } 7139 7140 dma_free_coherent(&pdev->dev, cmd_sz, cmd, paddr64); 7141 7142 if (tag & HPSA_ERROR_BIT) { 7143 dev_err(&pdev->dev, "controller message %02x:%02x failed\n", 7144 opcode, type); 7145 return -EIO; 7146 } 7147 7148 dev_info(&pdev->dev, "controller message %02x:%02x succeeded\n", 7149 opcode, type); 7150 return 0; 7151} 7152 7153#define hpsa_noop(p) hpsa_message(p, 3, 0) 7154 7155static int hpsa_controller_hard_reset(struct pci_dev *pdev, 7156 void __iomem *vaddr, u32 use_doorbell) 7157{ 7158 7159 if (use_doorbell) { 7160 /* For everything after the P600, the PCI power state method 7161 * of resetting the controller doesn't work, so we have this 7162 * other way using the doorbell register. 7163 */ 7164 dev_info(&pdev->dev, "using doorbell to reset controller\n"); 7165 writel(use_doorbell, vaddr + SA5_DOORBELL); 7166 7167 /* PMC hardware guys tell us we need a 10 second delay after 7168 * doorbell reset and before any attempt to talk to the board 7169 * at all to ensure that this actually works and doesn't fall 7170 * over in some weird corner cases. 7171 */ 7172 msleep(10000); 7173 } else { /* Try to do it the PCI power state way */ 7174 7175 /* Quoting from the Open CISS Specification: "The Power 7176 * Management Control/Status Register (CSR) controls the power 7177 * state of the device. The normal operating state is D0, 7178 * CSR=00h. The software off state is D3, CSR=03h. To reset 7179 * the controller, place the interface device in D3 then to D0, 7180 * this causes a secondary PCI reset which will reset the 7181 * controller." */ 7182 7183 int rc = 0; 7184 7185 dev_info(&pdev->dev, "using PCI PM to reset controller\n"); 7186 7187 /* enter the D3hot power management state */ 7188 rc = pci_set_power_state(pdev, PCI_D3hot); 7189 if (rc) 7190 return rc; 7191 7192 msleep(500); 7193 7194 /* enter the D0 power management state */ 7195 rc = pci_set_power_state(pdev, PCI_D0); 7196 if (rc) 7197 return rc; 7198 7199 /* 7200 * The P600 requires a small delay when changing states. 7201 * Otherwise we may think the board did not reset and we bail. 7202 * This for kdump only and is particular to the P600. 7203 */ 7204 msleep(500); 7205 } 7206 return 0; 7207} 7208 7209static void init_driver_version(char *driver_version, int len) 7210{ 7211 memset(driver_version, 0, len); 7212 strncpy(driver_version, HPSA " " HPSA_DRIVER_VERSION, len - 1); 7213} 7214 7215static int write_driver_ver_to_cfgtable(struct CfgTable __iomem *cfgtable) 7216{ 7217 char *driver_version; 7218 int i, size = sizeof(cfgtable->driver_version); 7219 7220 driver_version = kmalloc(size, GFP_KERNEL); 7221 if (!driver_version) 7222 return -ENOMEM; 7223 7224 init_driver_version(driver_version, size); 7225 for (i = 0; i < size; i++) 7226 writeb(driver_version[i], &cfgtable->driver_version[i]); 7227 kfree(driver_version); 7228 return 0; 7229} 7230 7231static void read_driver_ver_from_cfgtable(struct CfgTable __iomem *cfgtable, 7232 unsigned char *driver_ver) 7233{ 7234 int i; 7235 7236 for (i = 0; i < sizeof(cfgtable->driver_version); i++) 7237 driver_ver[i] = readb(&cfgtable->driver_version[i]); 7238} 7239 7240static int controller_reset_failed(struct CfgTable __iomem *cfgtable) 7241{ 7242 7243 char *driver_ver, *old_driver_ver; 7244 int rc, size = sizeof(cfgtable->driver_version); 7245 7246 old_driver_ver = kmalloc_array(2, size, GFP_KERNEL); 7247 if (!old_driver_ver) 7248 return -ENOMEM; 7249 driver_ver = old_driver_ver + size; 7250 7251 /* After a reset, the 32 bytes of "driver version" in the cfgtable 7252 * should have been changed, otherwise we know the reset failed. 7253 */ 7254 init_driver_version(old_driver_ver, size); 7255 read_driver_ver_from_cfgtable(cfgtable, driver_ver); 7256 rc = !memcmp(driver_ver, old_driver_ver, size); 7257 kfree(old_driver_ver); 7258 return rc; 7259} 7260/* This does a hard reset of the controller using PCI power management 7261 * states or the using the doorbell register. 7262 */ 7263static int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev, u32 board_id) 7264{ 7265 u64 cfg_offset; 7266 u32 cfg_base_addr; 7267 u64 cfg_base_addr_index; 7268 void __iomem *vaddr; 7269 unsigned long paddr; 7270 u32 misc_fw_support; 7271 int rc; 7272 struct CfgTable __iomem *cfgtable; 7273 u32 use_doorbell; 7274 u16 command_register; 7275 7276 /* For controllers as old as the P600, this is very nearly 7277 * the same thing as 7278 * 7279 * pci_save_state(pci_dev); 7280 * pci_set_power_state(pci_dev, PCI_D3hot); 7281 * pci_set_power_state(pci_dev, PCI_D0); 7282 * pci_restore_state(pci_dev); 7283 * 7284 * For controllers newer than the P600, the pci power state 7285 * method of resetting doesn't work so we have another way 7286 * using the doorbell register. 7287 */ 7288 7289 if (!ctlr_is_resettable(board_id)) { 7290 dev_warn(&pdev->dev, "Controller not resettable\n"); 7291 return -ENODEV; 7292 } 7293 7294 /* if controller is soft- but not hard resettable... */ 7295 if (!ctlr_is_hard_resettable(board_id)) 7296 return -ENOTSUPP; /* try soft reset later. */ 7297 7298 /* Save the PCI command register */ 7299 pci_read_config_word(pdev, 4, &command_register); 7300 pci_save_state(pdev); 7301 7302 /* find the first memory BAR, so we can find the cfg table */ 7303 rc = hpsa_pci_find_memory_BAR(pdev, &paddr); 7304 if (rc) 7305 return rc; 7306 vaddr = remap_pci_mem(paddr, 0x250); 7307 if (!vaddr) 7308 return -ENOMEM; 7309 7310 /* find cfgtable in order to check if reset via doorbell is supported */ 7311 rc = hpsa_find_cfg_addrs(pdev, vaddr, &cfg_base_addr, 7312 &cfg_base_addr_index, &cfg_offset); 7313 if (rc) 7314 goto unmap_vaddr; 7315 cfgtable = remap_pci_mem(pci_resource_start(pdev, 7316 cfg_base_addr_index) + cfg_offset, sizeof(*cfgtable)); 7317 if (!cfgtable) { 7318 rc = -ENOMEM; 7319 goto unmap_vaddr; 7320 } 7321 rc = write_driver_ver_to_cfgtable(cfgtable); 7322 if (rc) 7323 goto unmap_cfgtable; 7324 7325 /* If reset via doorbell register is supported, use that. 7326 * There are two such methods. Favor the newest method. 7327 */ 7328 misc_fw_support = readl(&cfgtable->misc_fw_support); 7329 use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET2; 7330 if (use_doorbell) { 7331 use_doorbell = DOORBELL_CTLR_RESET2; 7332 } else { 7333 use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET; 7334 if (use_doorbell) { 7335 dev_warn(&pdev->dev, 7336 "Soft reset not supported. Firmware update is required.\n"); 7337 rc = -ENOTSUPP; /* try soft reset */ 7338 goto unmap_cfgtable; 7339 } 7340 } 7341 7342 rc = hpsa_controller_hard_reset(pdev, vaddr, use_doorbell); 7343 if (rc) 7344 goto unmap_cfgtable; 7345 7346 pci_restore_state(pdev); 7347 pci_write_config_word(pdev, 4, command_register); 7348 7349 /* Some devices (notably the HP Smart Array 5i Controller) 7350 need a little pause here */ 7351 msleep(HPSA_POST_RESET_PAUSE_MSECS); 7352 7353 rc = hpsa_wait_for_board_state(pdev, vaddr, BOARD_READY); 7354 if (rc) { 7355 dev_warn(&pdev->dev, 7356 "Failed waiting for board to become ready after hard reset\n"); 7357 goto unmap_cfgtable; 7358 } 7359 7360 rc = controller_reset_failed(vaddr); 7361 if (rc < 0) 7362 goto unmap_cfgtable; 7363 if (rc) { 7364 dev_warn(&pdev->dev, "Unable to successfully reset " 7365 "controller. Will try soft reset.\n"); 7366 rc = -ENOTSUPP; 7367 } else { 7368 dev_info(&pdev->dev, "board ready after hard reset.\n"); 7369 } 7370 7371unmap_cfgtable: 7372 iounmap(cfgtable); 7373 7374unmap_vaddr: 7375 iounmap(vaddr); 7376 return rc; 7377} 7378 7379/* 7380 * We cannot read the structure directly, for portability we must use 7381 * the io functions. 7382 * This is for debug only. 7383 */ 7384static void print_cfg_table(struct device *dev, struct CfgTable __iomem *tb) 7385{ 7386#ifdef HPSA_DEBUG 7387 int i; 7388 char temp_name[17]; 7389 7390 dev_info(dev, "Controller Configuration information\n"); 7391 dev_info(dev, "------------------------------------\n"); 7392 for (i = 0; i < 4; i++) 7393 temp_name[i] = readb(&(tb->Signature[i])); 7394 temp_name[4] = '\0'; 7395 dev_info(dev, " Signature = %s\n", temp_name); 7396 dev_info(dev, " Spec Number = %d\n", readl(&(tb->SpecValence))); 7397 dev_info(dev, " Transport methods supported = 0x%x\n", 7398 readl(&(tb->TransportSupport))); 7399 dev_info(dev, " Transport methods active = 0x%x\n", 7400 readl(&(tb->TransportActive))); 7401 dev_info(dev, " Requested transport Method = 0x%x\n", 7402 readl(&(tb->HostWrite.TransportRequest))); 7403 dev_info(dev, " Coalesce Interrupt Delay = 0x%x\n", 7404 readl(&(tb->HostWrite.CoalIntDelay))); 7405 dev_info(dev, " Coalesce Interrupt Count = 0x%x\n", 7406 readl(&(tb->HostWrite.CoalIntCount))); 7407 dev_info(dev, " Max outstanding commands = %d\n", 7408 readl(&(tb->CmdsOutMax))); 7409 dev_info(dev, " Bus Types = 0x%x\n", readl(&(tb->BusTypes))); 7410 for (i = 0; i < 16; i++) 7411 temp_name[i] = readb(&(tb->ServerName[i])); 7412 temp_name[16] = '\0'; 7413 dev_info(dev, " Server Name = %s\n", temp_name); 7414 dev_info(dev, " Heartbeat Counter = 0x%x\n\n\n", 7415 readl(&(tb->HeartBeat))); 7416#endif /* HPSA_DEBUG */ 7417} 7418 7419static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr) 7420{ 7421 int i, offset, mem_type, bar_type; 7422 7423 if (pci_bar_addr == PCI_BASE_ADDRESS_0) /* looking for BAR zero? */ 7424 return 0; 7425 offset = 0; 7426 for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { 7427 bar_type = pci_resource_flags(pdev, i) & PCI_BASE_ADDRESS_SPACE; 7428 if (bar_type == PCI_BASE_ADDRESS_SPACE_IO) 7429 offset += 4; 7430 else { 7431 mem_type = pci_resource_flags(pdev, i) & 7432 PCI_BASE_ADDRESS_MEM_TYPE_MASK; 7433 switch (mem_type) { 7434 case PCI_BASE_ADDRESS_MEM_TYPE_32: 7435 case PCI_BASE_ADDRESS_MEM_TYPE_1M: 7436 offset += 4; /* 32 bit */ 7437 break; 7438 case PCI_BASE_ADDRESS_MEM_TYPE_64: 7439 offset += 8; 7440 break; 7441 default: /* reserved in PCI 2.2 */ 7442 dev_warn(&pdev->dev, 7443 "base address is invalid\n"); 7444 return -1; 7445 break; 7446 } 7447 } 7448 if (offset == pci_bar_addr - PCI_BASE_ADDRESS_0) 7449 return i + 1; 7450 } 7451 return -1; 7452} 7453 7454static void hpsa_disable_interrupt_mode(struct ctlr_info *h) 7455{ 7456 pci_free_irq_vectors(h->pdev); 7457 h->msix_vectors = 0; 7458} 7459 7460static void hpsa_setup_reply_map(struct ctlr_info *h) 7461{ 7462 const struct cpumask *mask; 7463 unsigned int queue, cpu; 7464 7465 for (queue = 0; queue < h->msix_vectors; queue++) { 7466 mask = pci_irq_get_affinity(h->pdev, queue); 7467 if (!mask) 7468 goto fallback; 7469 7470 for_each_cpu(cpu, mask) 7471 h->reply_map[cpu] = queue; 7472 } 7473 return; 7474 7475fallback: 7476 for_each_possible_cpu(cpu) 7477 h->reply_map[cpu] = 0; 7478} 7479 7480/* If MSI/MSI-X is supported by the kernel we will try to enable it on 7481 * controllers that are capable. If not, we use legacy INTx mode. 7482 */ 7483static int hpsa_interrupt_mode(struct ctlr_info *h) 7484{ 7485 unsigned int flags = PCI_IRQ_LEGACY; 7486 int ret; 7487 7488 /* Some boards advertise MSI but don't really support it */ 7489 switch (h->board_id) { 7490 case 0x40700E11: 7491 case 0x40800E11: 7492 case 0x40820E11: 7493 case 0x40830E11: 7494 break; 7495 default: 7496 ret = pci_alloc_irq_vectors(h->pdev, 1, MAX_REPLY_QUEUES, 7497 PCI_IRQ_MSIX | PCI_IRQ_AFFINITY); 7498 if (ret > 0) { 7499 h->msix_vectors = ret; 7500 return 0; 7501 } 7502 7503 flags |= PCI_IRQ_MSI; 7504 break; 7505 } 7506 7507 ret = pci_alloc_irq_vectors(h->pdev, 1, 1, flags); 7508 if (ret < 0) 7509 return ret; 7510 return 0; 7511} 7512 7513static int hpsa_lookup_board_id(struct pci_dev *pdev, u32 *board_id, 7514 bool *legacy_board) 7515{ 7516 int i; 7517 u32 subsystem_vendor_id, subsystem_device_id; 7518 7519 subsystem_vendor_id = pdev->subsystem_vendor; 7520 subsystem_device_id = pdev->subsystem_device; 7521 *board_id = ((subsystem_device_id << 16) & 0xffff0000) | 7522 subsystem_vendor_id; 7523 7524 if (legacy_board) 7525 *legacy_board = false; 7526 for (i = 0; i < ARRAY_SIZE(products); i++) 7527 if (*board_id == products[i].board_id) { 7528 if (products[i].access != &SA5A_access && 7529 products[i].access != &SA5B_access) 7530 return i; 7531 dev_warn(&pdev->dev, 7532 "legacy board ID: 0x%08x\n", 7533 *board_id); 7534 if (legacy_board) 7535 *legacy_board = true; 7536 return i; 7537 } 7538 7539 dev_warn(&pdev->dev, "unrecognized board ID: 0x%08x\n", *board_id); 7540 if (legacy_board) 7541 *legacy_board = true; 7542 return ARRAY_SIZE(products) - 1; /* generic unknown smart array */ 7543} 7544 7545static int hpsa_pci_find_memory_BAR(struct pci_dev *pdev, 7546 unsigned long *memory_bar) 7547{ 7548 int i; 7549 7550 for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) 7551 if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) { 7552 /* addressing mode bits already removed */ 7553 *memory_bar = pci_resource_start(pdev, i); 7554 dev_dbg(&pdev->dev, "memory BAR = %lx\n", 7555 *memory_bar); 7556 return 0; 7557 } 7558 dev_warn(&pdev->dev, "no memory BAR found\n"); 7559 return -ENODEV; 7560} 7561 7562static int hpsa_wait_for_board_state(struct pci_dev *pdev, void __iomem *vaddr, 7563 int wait_for_ready) 7564{ 7565 int i, iterations; 7566 u32 scratchpad; 7567 if (wait_for_ready) 7568 iterations = HPSA_BOARD_READY_ITERATIONS; 7569 else 7570 iterations = HPSA_BOARD_NOT_READY_ITERATIONS; 7571 7572 for (i = 0; i < iterations; i++) { 7573 scratchpad = readl(vaddr + SA5_SCRATCHPAD_OFFSET); 7574 if (wait_for_ready) { 7575 if (scratchpad == HPSA_FIRMWARE_READY) 7576 return 0; 7577 } else { 7578 if (scratchpad != HPSA_FIRMWARE_READY) 7579 return 0; 7580 } 7581 msleep(HPSA_BOARD_READY_POLL_INTERVAL_MSECS); 7582 } 7583 dev_warn(&pdev->dev, "board not ready, timed out.\n"); 7584 return -ENODEV; 7585} 7586 7587static int hpsa_find_cfg_addrs(struct pci_dev *pdev, void __iomem *vaddr, 7588 u32 *cfg_base_addr, u64 *cfg_base_addr_index, 7589 u64 *cfg_offset) 7590{ 7591 *cfg_base_addr = readl(vaddr + SA5_CTCFG_OFFSET); 7592 *cfg_offset = readl(vaddr + SA5_CTMEM_OFFSET); 7593 *cfg_base_addr &= (u32) 0x0000ffff; 7594 *cfg_base_addr_index = find_PCI_BAR_index(pdev, *cfg_base_addr); 7595 if (*cfg_base_addr_index == -1) { 7596 dev_warn(&pdev->dev, "cannot find cfg_base_addr_index\n"); 7597 return -ENODEV; 7598 } 7599 return 0; 7600} 7601 7602static void hpsa_free_cfgtables(struct ctlr_info *h) 7603{ 7604 if (h->transtable) { 7605 iounmap(h->transtable); 7606 h->transtable = NULL; 7607 } 7608 if (h->cfgtable) { 7609 iounmap(h->cfgtable); 7610 h->cfgtable = NULL; 7611 } 7612} 7613 7614/* Find and map CISS config table and transfer table 7615+ * several items must be unmapped (freed) later 7616+ * */ 7617static int hpsa_find_cfgtables(struct ctlr_info *h) 7618{ 7619 u64 cfg_offset; 7620 u32 cfg_base_addr; 7621 u64 cfg_base_addr_index; 7622 u32 trans_offset; 7623 int rc; 7624 7625 rc = hpsa_find_cfg_addrs(h->pdev, h->vaddr, &cfg_base_addr, 7626 &cfg_base_addr_index, &cfg_offset); 7627 if (rc) 7628 return rc; 7629 h->cfgtable = remap_pci_mem(pci_resource_start(h->pdev, 7630 cfg_base_addr_index) + cfg_offset, sizeof(*h->cfgtable)); 7631 if (!h->cfgtable) { 7632 dev_err(&h->pdev->dev, "Failed mapping cfgtable\n"); 7633 return -ENOMEM; 7634 } 7635 rc = write_driver_ver_to_cfgtable(h->cfgtable); 7636 if (rc) 7637 return rc; 7638 /* Find performant mode table. */ 7639 trans_offset = readl(&h->cfgtable->TransMethodOffset); 7640 h->transtable = remap_pci_mem(pci_resource_start(h->pdev, 7641 cfg_base_addr_index)+cfg_offset+trans_offset, 7642 sizeof(*h->transtable)); 7643 if (!h->transtable) { 7644 dev_err(&h->pdev->dev, "Failed mapping transfer table\n"); 7645 hpsa_free_cfgtables(h); 7646 return -ENOMEM; 7647 } 7648 return 0; 7649} 7650 7651static void hpsa_get_max_perf_mode_cmds(struct ctlr_info *h) 7652{ 7653#define MIN_MAX_COMMANDS 16 7654 BUILD_BUG_ON(MIN_MAX_COMMANDS <= HPSA_NRESERVED_CMDS); 7655 7656 h->max_commands = readl(&h->cfgtable->MaxPerformantModeCommands); 7657 7658 /* Limit commands in memory limited kdump scenario. */ 7659 if (reset_devices && h->max_commands > 32) 7660 h->max_commands = 32; 7661 7662 if (h->max_commands < MIN_MAX_COMMANDS) { 7663 dev_warn(&h->pdev->dev, 7664 "Controller reports max supported commands of %d Using %d instead. Ensure that firmware is up to date.\n", 7665 h->max_commands, 7666 MIN_MAX_COMMANDS); 7667 h->max_commands = MIN_MAX_COMMANDS; 7668 } 7669} 7670 7671/* If the controller reports that the total max sg entries is greater than 512, 7672 * then we know that chained SG blocks work. (Original smart arrays did not 7673 * support chained SG blocks and would return zero for max sg entries.) 7674 */ 7675static int hpsa_supports_chained_sg_blocks(struct ctlr_info *h) 7676{ 7677 return h->maxsgentries > 512; 7678} 7679 7680/* Interrogate the hardware for some limits: 7681 * max commands, max SG elements without chaining, and with chaining, 7682 * SG chain block size, etc. 7683 */ 7684static void hpsa_find_board_params(struct ctlr_info *h) 7685{ 7686 hpsa_get_max_perf_mode_cmds(h); 7687 h->nr_cmds = h->max_commands; 7688 h->maxsgentries = readl(&(h->cfgtable->MaxScatterGatherElements)); 7689 h->fw_support = readl(&(h->cfgtable->misc_fw_support)); 7690 if (hpsa_supports_chained_sg_blocks(h)) { 7691 /* Limit in-command s/g elements to 32 save dma'able memory. */ 7692 h->max_cmd_sg_entries = 32; 7693 h->chainsize = h->maxsgentries - h->max_cmd_sg_entries; 7694 h->maxsgentries--; /* save one for chain pointer */ 7695 } else { 7696 /* 7697 * Original smart arrays supported at most 31 s/g entries 7698 * embedded inline in the command (trying to use more 7699 * would lock up the controller) 7700 */ 7701 h->max_cmd_sg_entries = 31; 7702 h->maxsgentries = 31; /* default to traditional values */ 7703 h->chainsize = 0; 7704 } 7705 7706 /* Find out what task management functions are supported and cache */ 7707 h->TMFSupportFlags = readl(&(h->cfgtable->TMFSupportFlags)); 7708 if (!(HPSATMF_PHYS_TASK_ABORT & h->TMFSupportFlags)) 7709 dev_warn(&h->pdev->dev, "Physical aborts not supported\n"); 7710 if (!(HPSATMF_LOG_TASK_ABORT & h->TMFSupportFlags)) 7711 dev_warn(&h->pdev->dev, "Logical aborts not supported\n"); 7712 if (!(HPSATMF_IOACCEL_ENABLED & h->TMFSupportFlags)) 7713 dev_warn(&h->pdev->dev, "HP SSD Smart Path aborts not supported\n"); 7714} 7715 7716static inline bool hpsa_CISS_signature_present(struct ctlr_info *h) 7717{ 7718 if (!check_signature(h->cfgtable->Signature, "CISS", 4)) { 7719 dev_err(&h->pdev->dev, "not a valid CISS config table\n"); 7720 return false; 7721 } 7722 return true; 7723} 7724 7725static inline void hpsa_set_driver_support_bits(struct ctlr_info *h) 7726{ 7727 u32 driver_support; 7728 7729 driver_support = readl(&(h->cfgtable->driver_support)); 7730 /* Need to enable prefetch in the SCSI core for 6400 in x86 */ 7731#ifdef CONFIG_X86 7732 driver_support |= ENABLE_SCSI_PREFETCH; 7733#endif 7734 driver_support |= ENABLE_UNIT_ATTN; 7735 writel(driver_support, &(h->cfgtable->driver_support)); 7736} 7737 7738/* Disable DMA prefetch for the P600. Otherwise an ASIC bug may result 7739 * in a prefetch beyond physical memory. 7740 */ 7741static inline void hpsa_p600_dma_prefetch_quirk(struct ctlr_info *h) 7742{ 7743 u32 dma_prefetch; 7744 7745 if (h->board_id != 0x3225103C) 7746 return; 7747 dma_prefetch = readl(h->vaddr + I2O_DMA1_CFG); 7748 dma_prefetch |= 0x8000; 7749 writel(dma_prefetch, h->vaddr + I2O_DMA1_CFG); 7750} 7751 7752static int hpsa_wait_for_clear_event_notify_ack(struct ctlr_info *h) 7753{ 7754 int i; 7755 u32 doorbell_value; 7756 unsigned long flags; 7757 /* wait until the clear_event_notify bit 6 is cleared by controller. */ 7758 for (i = 0; i < MAX_CLEAR_EVENT_WAIT; i++) { 7759 spin_lock_irqsave(&h->lock, flags); 7760 doorbell_value = readl(h->vaddr + SA5_DOORBELL); 7761 spin_unlock_irqrestore(&h->lock, flags); 7762 if (!(doorbell_value & DOORBELL_CLEAR_EVENTS)) 7763 goto done; 7764 /* delay and try again */ 7765 msleep(CLEAR_EVENT_WAIT_INTERVAL); 7766 } 7767 return -ENODEV; 7768done: 7769 return 0; 7770} 7771 7772static int hpsa_wait_for_mode_change_ack(struct ctlr_info *h) 7773{ 7774 int i; 7775 u32 doorbell_value; 7776 unsigned long flags; 7777 7778 /* under certain very rare conditions, this can take awhile. 7779 * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right 7780 * as we enter this code.) 7781 */ 7782 for (i = 0; i < MAX_MODE_CHANGE_WAIT; i++) { 7783 if (h->remove_in_progress) 7784 goto done; 7785 spin_lock_irqsave(&h->lock, flags); 7786 doorbell_value = readl(h->vaddr + SA5_DOORBELL); 7787 spin_unlock_irqrestore(&h->lock, flags); 7788 if (!(doorbell_value & CFGTBL_ChangeReq)) 7789 goto done; 7790 /* delay and try again */ 7791 msleep(MODE_CHANGE_WAIT_INTERVAL); 7792 } 7793 return -ENODEV; 7794done: 7795 return 0; 7796} 7797 7798/* return -ENODEV or other reason on error, 0 on success */ 7799static int hpsa_enter_simple_mode(struct ctlr_info *h) 7800{ 7801 u32 trans_support; 7802 7803 trans_support = readl(&(h->cfgtable->TransportSupport)); 7804 if (!(trans_support & SIMPLE_MODE)) 7805 return -ENOTSUPP; 7806 7807 h->max_commands = readl(&(h->cfgtable->CmdsOutMax)); 7808 7809 /* Update the field, and then ring the doorbell */ 7810 writel(CFGTBL_Trans_Simple, &(h->cfgtable->HostWrite.TransportRequest)); 7811 writel(0, &h->cfgtable->HostWrite.command_pool_addr_hi); 7812 writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL); 7813 if (hpsa_wait_for_mode_change_ack(h)) 7814 goto error; 7815 print_cfg_table(&h->pdev->dev, h->cfgtable); 7816 if (!(readl(&(h->cfgtable->TransportActive)) & CFGTBL_Trans_Simple)) 7817 goto error; 7818 h->transMethod = CFGTBL_Trans_Simple; 7819 return 0; 7820error: 7821 dev_err(&h->pdev->dev, "failed to enter simple mode\n"); 7822 return -ENODEV; 7823} 7824 7825/* free items allocated or mapped by hpsa_pci_init */ 7826static void hpsa_free_pci_init(struct ctlr_info *h) 7827{ 7828 hpsa_free_cfgtables(h); /* pci_init 4 */ 7829 iounmap(h->vaddr); /* pci_init 3 */ 7830 h->vaddr = NULL; 7831 hpsa_disable_interrupt_mode(h); /* pci_init 2 */ 7832 /* 7833 * call pci_disable_device before pci_release_regions per 7834 * Documentation/driver-api/pci/pci.rst 7835 */ 7836 pci_disable_device(h->pdev); /* pci_init 1 */ 7837 pci_release_regions(h->pdev); /* pci_init 2 */ 7838} 7839 7840/* several items must be freed later */ 7841static int hpsa_pci_init(struct ctlr_info *h) 7842{ 7843 int prod_index, err; 7844 bool legacy_board; 7845 7846 prod_index = hpsa_lookup_board_id(h->pdev, &h->board_id, &legacy_board); 7847 if (prod_index < 0) 7848 return prod_index; 7849 h->product_name = products[prod_index].product_name; 7850 h->access = *(products[prod_index].access); 7851 h->legacy_board = legacy_board; 7852 pci_disable_link_state(h->pdev, PCIE_LINK_STATE_L0S | 7853 PCIE_LINK_STATE_L1 | PCIE_LINK_STATE_CLKPM); 7854 7855 err = pci_enable_device(h->pdev); 7856 if (err) { 7857 dev_err(&h->pdev->dev, "failed to enable PCI device\n"); 7858 pci_disable_device(h->pdev); 7859 return err; 7860 } 7861 7862 err = pci_request_regions(h->pdev, HPSA); 7863 if (err) { 7864 dev_err(&h->pdev->dev, 7865 "failed to obtain PCI resources\n"); 7866 pci_disable_device(h->pdev); 7867 return err; 7868 } 7869 7870 pci_set_master(h->pdev); 7871 7872 err = hpsa_interrupt_mode(h); 7873 if (err) 7874 goto clean1; 7875 7876 /* setup mapping between CPU and reply queue */ 7877 hpsa_setup_reply_map(h); 7878 7879 err = hpsa_pci_find_memory_BAR(h->pdev, &h->paddr); 7880 if (err) 7881 goto clean2; /* intmode+region, pci */ 7882 h->vaddr = remap_pci_mem(h->paddr, 0x250); 7883 if (!h->vaddr) { 7884 dev_err(&h->pdev->dev, "failed to remap PCI mem\n"); 7885 err = -ENOMEM; 7886 goto clean2; /* intmode+region, pci */ 7887 } 7888 err = hpsa_wait_for_board_state(h->pdev, h->vaddr, BOARD_READY); 7889 if (err) 7890 goto clean3; /* vaddr, intmode+region, pci */ 7891 err = hpsa_find_cfgtables(h); 7892 if (err) 7893 goto clean3; /* vaddr, intmode+region, pci */ 7894 hpsa_find_board_params(h); 7895 7896 if (!hpsa_CISS_signature_present(h)) { 7897 err = -ENODEV; 7898 goto clean4; /* cfgtables, vaddr, intmode+region, pci */ 7899 } 7900 hpsa_set_driver_support_bits(h); 7901 hpsa_p600_dma_prefetch_quirk(h); 7902 err = hpsa_enter_simple_mode(h); 7903 if (err) 7904 goto clean4; /* cfgtables, vaddr, intmode+region, pci */ 7905 return 0; 7906 7907clean4: /* cfgtables, vaddr, intmode+region, pci */ 7908 hpsa_free_cfgtables(h); 7909clean3: /* vaddr, intmode+region, pci */ 7910 iounmap(h->vaddr); 7911 h->vaddr = NULL; 7912clean2: /* intmode+region, pci */ 7913 hpsa_disable_interrupt_mode(h); 7914clean1: 7915 /* 7916 * call pci_disable_device before pci_release_regions per 7917 * Documentation/driver-api/pci/pci.rst 7918 */ 7919 pci_disable_device(h->pdev); 7920 pci_release_regions(h->pdev); 7921 return err; 7922} 7923 7924static void hpsa_hba_inquiry(struct ctlr_info *h) 7925{ 7926 int rc; 7927 7928#define HBA_INQUIRY_BYTE_COUNT 64 7929 h->hba_inquiry_data = kmalloc(HBA_INQUIRY_BYTE_COUNT, GFP_KERNEL); 7930 if (!h->hba_inquiry_data) 7931 return; 7932 rc = hpsa_scsi_do_inquiry(h, RAID_CTLR_LUNID, 0, 7933 h->hba_inquiry_data, HBA_INQUIRY_BYTE_COUNT); 7934 if (rc != 0) { 7935 kfree(h->hba_inquiry_data); 7936 h->hba_inquiry_data = NULL; 7937 } 7938} 7939 7940static int hpsa_init_reset_devices(struct pci_dev *pdev, u32 board_id) 7941{ 7942 int rc, i; 7943 void __iomem *vaddr; 7944 7945 if (!reset_devices) 7946 return 0; 7947 7948 /* kdump kernel is loading, we don't know in which state is 7949 * the pci interface. The dev->enable_cnt is equal zero 7950 * so we call enable+disable, wait a while and switch it on. 7951 */ 7952 rc = pci_enable_device(pdev); 7953 if (rc) { 7954 dev_warn(&pdev->dev, "Failed to enable PCI device\n"); 7955 return -ENODEV; 7956 } 7957 pci_disable_device(pdev); 7958 msleep(260); /* a randomly chosen number */ 7959 rc = pci_enable_device(pdev); 7960 if (rc) { 7961 dev_warn(&pdev->dev, "failed to enable device.\n"); 7962 return -ENODEV; 7963 } 7964 7965 pci_set_master(pdev); 7966 7967 vaddr = pci_ioremap_bar(pdev, 0); 7968 if (vaddr == NULL) { 7969 rc = -ENOMEM; 7970 goto out_disable; 7971 } 7972 writel(SA5_INTR_OFF, vaddr + SA5_REPLY_INTR_MASK_OFFSET); 7973 iounmap(vaddr); 7974 7975 /* Reset the controller with a PCI power-cycle or via doorbell */ 7976 rc = hpsa_kdump_hard_reset_controller(pdev, board_id); 7977 7978 /* -ENOTSUPP here means we cannot reset the controller 7979 * but it's already (and still) up and running in 7980 * "performant mode". Or, it might be 640x, which can't reset 7981 * due to concerns about shared bbwc between 6402/6404 pair. 7982 */ 7983 if (rc) 7984 goto out_disable; 7985 7986 /* Now try to get the controller to respond to a no-op */ 7987 dev_info(&pdev->dev, "Waiting for controller to respond to no-op\n"); 7988 for (i = 0; i < HPSA_POST_RESET_NOOP_RETRIES; i++) { 7989 if (hpsa_noop(pdev) == 0) 7990 break; 7991 else 7992 dev_warn(&pdev->dev, "no-op failed%s\n", 7993 (i < 11 ? "; re-trying" : "")); 7994 } 7995 7996out_disable: 7997 7998 pci_disable_device(pdev); 7999 return rc; 8000} 8001 8002static void hpsa_free_cmd_pool(struct ctlr_info *h) 8003{ 8004 kfree(h->cmd_pool_bits); 8005 h->cmd_pool_bits = NULL; 8006 if (h->cmd_pool) { 8007 dma_free_coherent(&h->pdev->dev, 8008 h->nr_cmds * sizeof(struct CommandList), 8009 h->cmd_pool, 8010 h->cmd_pool_dhandle); 8011 h->cmd_pool = NULL; 8012 h->cmd_pool_dhandle = 0; 8013 } 8014 if (h->errinfo_pool) { 8015 dma_free_coherent(&h->pdev->dev, 8016 h->nr_cmds * sizeof(struct ErrorInfo), 8017 h->errinfo_pool, 8018 h->errinfo_pool_dhandle); 8019 h->errinfo_pool = NULL; 8020 h->errinfo_pool_dhandle = 0; 8021 } 8022} 8023 8024static int hpsa_alloc_cmd_pool(struct ctlr_info *h) 8025{ 8026 h->cmd_pool_bits = kcalloc(DIV_ROUND_UP(h->nr_cmds, BITS_PER_LONG), 8027 sizeof(unsigned long), 8028 GFP_KERNEL); 8029 h->cmd_pool = dma_alloc_coherent(&h->pdev->dev, 8030 h->nr_cmds * sizeof(*h->cmd_pool), 8031 &h->cmd_pool_dhandle, GFP_KERNEL); 8032 h->errinfo_pool = dma_alloc_coherent(&h->pdev->dev, 8033 h->nr_cmds * sizeof(*h->errinfo_pool), 8034 &h->errinfo_pool_dhandle, GFP_KERNEL); 8035 if ((h->cmd_pool_bits == NULL) 8036 || (h->cmd_pool == NULL) 8037 || (h->errinfo_pool == NULL)) { 8038 dev_err(&h->pdev->dev, "out of memory in %s", __func__); 8039 goto clean_up; 8040 } 8041 hpsa_preinitialize_commands(h); 8042 return 0; 8043clean_up: 8044 hpsa_free_cmd_pool(h); 8045 return -ENOMEM; 8046} 8047 8048/* clear affinity hints and free MSI-X, MSI, or legacy INTx vectors */ 8049static void hpsa_free_irqs(struct ctlr_info *h) 8050{ 8051 int i; 8052 int irq_vector = 0; 8053 8054 if (hpsa_simple_mode) 8055 irq_vector = h->intr_mode; 8056 8057 if (!h->msix_vectors || h->intr_mode != PERF_MODE_INT) { 8058 /* Single reply queue, only one irq to free */ 8059 free_irq(pci_irq_vector(h->pdev, irq_vector), 8060 &h->q[h->intr_mode]); 8061 h->q[h->intr_mode] = 0; 8062 return; 8063 } 8064 8065 for (i = 0; i < h->msix_vectors; i++) { 8066 free_irq(pci_irq_vector(h->pdev, i), &h->q[i]); 8067 h->q[i] = 0; 8068 } 8069 for (; i < MAX_REPLY_QUEUES; i++) 8070 h->q[i] = 0; 8071} 8072 8073/* returns 0 on success; cleans up and returns -Enn on error */ 8074static int hpsa_request_irqs(struct ctlr_info *h, 8075 irqreturn_t (*msixhandler)(int, void *), 8076 irqreturn_t (*intxhandler)(int, void *)) 8077{ 8078 int rc, i; 8079 int irq_vector = 0; 8080 8081 if (hpsa_simple_mode) 8082 irq_vector = h->intr_mode; 8083 8084 /* 8085 * initialize h->q[x] = x so that interrupt handlers know which 8086 * queue to process. 8087 */ 8088 for (i = 0; i < MAX_REPLY_QUEUES; i++) 8089 h->q[i] = (u8) i; 8090 8091 if (h->intr_mode == PERF_MODE_INT && h->msix_vectors > 0) { 8092 /* If performant mode and MSI-X, use multiple reply queues */ 8093 for (i = 0; i < h->msix_vectors; i++) { 8094 sprintf(h->intrname[i], "%s-msix%d", h->devname, i); 8095 rc = request_irq(pci_irq_vector(h->pdev, i), msixhandler, 8096 0, h->intrname[i], 8097 &h->q[i]); 8098 if (rc) { 8099 int j; 8100 8101 dev_err(&h->pdev->dev, 8102 "failed to get irq %d for %s\n", 8103 pci_irq_vector(h->pdev, i), h->devname); 8104 for (j = 0; j < i; j++) { 8105 free_irq(pci_irq_vector(h->pdev, j), &h->q[j]); 8106 h->q[j] = 0; 8107 } 8108 for (; j < MAX_REPLY_QUEUES; j++) 8109 h->q[j] = 0; 8110 return rc; 8111 } 8112 } 8113 } else { 8114 /* Use single reply pool */ 8115 if (h->msix_vectors > 0 || h->pdev->msi_enabled) { 8116 sprintf(h->intrname[0], "%s-msi%s", h->devname, 8117 h->msix_vectors ? "x" : ""); 8118 rc = request_irq(pci_irq_vector(h->pdev, irq_vector), 8119 msixhandler, 0, 8120 h->intrname[0], 8121 &h->q[h->intr_mode]); 8122 } else { 8123 sprintf(h->intrname[h->intr_mode], 8124 "%s-intx", h->devname); 8125 rc = request_irq(pci_irq_vector(h->pdev, irq_vector), 8126 intxhandler, IRQF_SHARED, 8127 h->intrname[0], 8128 &h->q[h->intr_mode]); 8129 } 8130 } 8131 if (rc) { 8132 dev_err(&h->pdev->dev, "failed to get irq %d for %s\n", 8133 pci_irq_vector(h->pdev, irq_vector), h->devname); 8134 hpsa_free_irqs(h); 8135 return -ENODEV; 8136 } 8137 return 0; 8138} 8139 8140static int hpsa_kdump_soft_reset(struct ctlr_info *h) 8141{ 8142 int rc; 8143 hpsa_send_host_reset(h, HPSA_RESET_TYPE_CONTROLLER); 8144 8145 dev_info(&h->pdev->dev, "Waiting for board to soft reset.\n"); 8146 rc = hpsa_wait_for_board_state(h->pdev, h->vaddr, BOARD_NOT_READY); 8147 if (rc) { 8148 dev_warn(&h->pdev->dev, "Soft reset had no effect.\n"); 8149 return rc; 8150 } 8151 8152 dev_info(&h->pdev->dev, "Board reset, awaiting READY status.\n"); 8153 rc = hpsa_wait_for_board_state(h->pdev, h->vaddr, BOARD_READY); 8154 if (rc) { 8155 dev_warn(&h->pdev->dev, "Board failed to become ready " 8156 "after soft reset.\n"); 8157 return rc; 8158 } 8159 8160 return 0; 8161} 8162 8163static void hpsa_free_reply_queues(struct ctlr_info *h) 8164{ 8165 int i; 8166 8167 for (i = 0; i < h->nreply_queues; i++) { 8168 if (!h->reply_queue[i].head) 8169 continue; 8170 dma_free_coherent(&h->pdev->dev, 8171 h->reply_queue_size, 8172 h->reply_queue[i].head, 8173 h->reply_queue[i].busaddr); 8174 h->reply_queue[i].head = NULL; 8175 h->reply_queue[i].busaddr = 0; 8176 } 8177 h->reply_queue_size = 0; 8178} 8179 8180static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h) 8181{ 8182 hpsa_free_performant_mode(h); /* init_one 7 */ 8183 hpsa_free_sg_chain_blocks(h); /* init_one 6 */ 8184 hpsa_free_cmd_pool(h); /* init_one 5 */ 8185 hpsa_free_irqs(h); /* init_one 4 */ 8186 scsi_host_put(h->scsi_host); /* init_one 3 */ 8187 h->scsi_host = NULL; /* init_one 3 */ 8188 hpsa_free_pci_init(h); /* init_one 2_5 */ 8189 free_percpu(h->lockup_detected); /* init_one 2 */ 8190 h->lockup_detected = NULL; /* init_one 2 */ 8191 if (h->resubmit_wq) { 8192 destroy_workqueue(h->resubmit_wq); /* init_one 1 */ 8193 h->resubmit_wq = NULL; 8194 } 8195 if (h->rescan_ctlr_wq) { 8196 destroy_workqueue(h->rescan_ctlr_wq); 8197 h->rescan_ctlr_wq = NULL; 8198 } 8199 if (h->monitor_ctlr_wq) { 8200 destroy_workqueue(h->monitor_ctlr_wq); 8201 h->monitor_ctlr_wq = NULL; 8202 } 8203 8204 kfree(h); /* init_one 1 */ 8205} 8206 8207/* Called when controller lockup detected. */ 8208static void fail_all_outstanding_cmds(struct ctlr_info *h) 8209{ 8210 int i, refcount; 8211 struct CommandList *c; 8212 int failcount = 0; 8213 8214 flush_workqueue(h->resubmit_wq); /* ensure all cmds are fully built */ 8215 for (i = 0; i < h->nr_cmds; i++) { 8216 c = h->cmd_pool + i; 8217 refcount = atomic_inc_return(&c->refcount); 8218 if (refcount > 1) { 8219 c->err_info->CommandStatus = CMD_CTLR_LOCKUP; 8220 finish_cmd(c); 8221 atomic_dec(&h->commands_outstanding); 8222 failcount++; 8223 } 8224 cmd_free(h, c); 8225 } 8226 dev_warn(&h->pdev->dev, 8227 "failed %d commands in fail_all\n", failcount); 8228} 8229 8230static void set_lockup_detected_for_all_cpus(struct ctlr_info *h, u32 value) 8231{ 8232 int cpu; 8233 8234 for_each_online_cpu(cpu) { 8235 u32 *lockup_detected; 8236 lockup_detected = per_cpu_ptr(h->lockup_detected, cpu); 8237 *lockup_detected = value; 8238 } 8239 wmb(); /* be sure the per-cpu variables are out to memory */ 8240} 8241 8242static void controller_lockup_detected(struct ctlr_info *h) 8243{ 8244 unsigned long flags; 8245 u32 lockup_detected; 8246 8247 h->access.set_intr_mask(h, HPSA_INTR_OFF); 8248 spin_lock_irqsave(&h->lock, flags); 8249 lockup_detected = readl(h->vaddr + SA5_SCRATCHPAD_OFFSET); 8250 if (!lockup_detected) { 8251 /* no heartbeat, but controller gave us a zero. */ 8252 dev_warn(&h->pdev->dev, 8253 "lockup detected after %d but scratchpad register is zero\n", 8254 h->heartbeat_sample_interval / HZ); 8255 lockup_detected = 0xffffffff; 8256 } 8257 set_lockup_detected_for_all_cpus(h, lockup_detected); 8258 spin_unlock_irqrestore(&h->lock, flags); 8259 dev_warn(&h->pdev->dev, "Controller lockup detected: 0x%08x after %d\n", 8260 lockup_detected, h->heartbeat_sample_interval / HZ); 8261 if (lockup_detected == 0xffff0000) { 8262 dev_warn(&h->pdev->dev, "Telling controller to do a CHKPT\n"); 8263 writel(DOORBELL_GENERATE_CHKPT, h->vaddr + SA5_DOORBELL); 8264 } 8265 pci_disable_device(h->pdev); 8266 fail_all_outstanding_cmds(h); 8267} 8268 8269static int detect_controller_lockup(struct ctlr_info *h) 8270{ 8271 u64 now; 8272 u32 heartbeat; 8273 unsigned long flags; 8274 8275 now = get_jiffies_64(); 8276 /* If we've received an interrupt recently, we're ok. */ 8277 if (time_after64(h->last_intr_timestamp + 8278 (h->heartbeat_sample_interval), now)) 8279 return false; 8280 8281 /* 8282 * If we've already checked the heartbeat recently, we're ok. 8283 * This could happen if someone sends us a signal. We 8284 * otherwise don't care about signals in this thread. 8285 */ 8286 if (time_after64(h->last_heartbeat_timestamp + 8287 (h->heartbeat_sample_interval), now)) 8288 return false; 8289 8290 /* If heartbeat has not changed since we last looked, we're not ok. */ 8291 spin_lock_irqsave(&h->lock, flags); 8292 heartbeat = readl(&h->cfgtable->HeartBeat); 8293 spin_unlock_irqrestore(&h->lock, flags); 8294 if (h->last_heartbeat == heartbeat) { 8295 controller_lockup_detected(h); 8296 return true; 8297 } 8298 8299 /* We're ok. */ 8300 h->last_heartbeat = heartbeat; 8301 h->last_heartbeat_timestamp = now; 8302 return false; 8303} 8304 8305/* 8306 * Set ioaccel status for all ioaccel volumes. 8307 * 8308 * Called from monitor controller worker (hpsa_event_monitor_worker) 8309 * 8310 * A Volume (or Volumes that comprise an Array set) may be undergoing a 8311 * transformation, so we will be turning off ioaccel for all volumes that 8312 * make up the Array. 8313 */ 8314static void hpsa_set_ioaccel_status(struct ctlr_info *h) 8315{ 8316 int rc; 8317 int i; 8318 u8 ioaccel_status; 8319 unsigned char *buf; 8320 struct hpsa_scsi_dev_t *device; 8321 8322 if (!h) 8323 return; 8324 8325 buf = kmalloc(64, GFP_KERNEL); 8326 if (!buf) 8327 return; 8328 8329 /* 8330 * Run through current device list used during I/O requests. 8331 */ 8332 for (i = 0; i < h->ndevices; i++) { 8333 int offload_to_be_enabled = 0; 8334 int offload_config = 0; 8335 8336 device = h->dev[i]; 8337 8338 if (!device) 8339 continue; 8340 if (!hpsa_vpd_page_supported(h, device->scsi3addr, 8341 HPSA_VPD_LV_IOACCEL_STATUS)) 8342 continue; 8343 8344 memset(buf, 0, 64); 8345 8346 rc = hpsa_scsi_do_inquiry(h, device->scsi3addr, 8347 VPD_PAGE | HPSA_VPD_LV_IOACCEL_STATUS, 8348 buf, 64); 8349 if (rc != 0) 8350 continue; 8351 8352 ioaccel_status = buf[IOACCEL_STATUS_BYTE]; 8353 8354 /* 8355 * Check if offload is still configured on 8356 */ 8357 offload_config = 8358 !!(ioaccel_status & OFFLOAD_CONFIGURED_BIT); 8359 /* 8360 * If offload is configured on, check to see if ioaccel 8361 * needs to be enabled. 8362 */ 8363 if (offload_config) 8364 offload_to_be_enabled = 8365 !!(ioaccel_status & OFFLOAD_ENABLED_BIT); 8366 8367 /* 8368 * If ioaccel is to be re-enabled, re-enable later during the 8369 * scan operation so the driver can get a fresh raidmap 8370 * before turning ioaccel back on. 8371 */ 8372 if (offload_to_be_enabled) 8373 continue; 8374 8375 /* 8376 * Immediately turn off ioaccel for any volume the 8377 * controller tells us to. Some of the reasons could be: 8378 * transformation - change to the LVs of an Array. 8379 * degraded volume - component failure 8380 */ 8381 hpsa_turn_off_ioaccel_for_device(device); 8382 } 8383 8384 kfree(buf); 8385} 8386 8387static void hpsa_ack_ctlr_events(struct ctlr_info *h) 8388{ 8389 char *event_type; 8390 8391 if (!(h->fw_support & MISC_FW_EVENT_NOTIFY)) 8392 return; 8393 8394 /* Ask the controller to clear the events we're handling. */ 8395 if ((h->transMethod & (CFGTBL_Trans_io_accel1 8396 | CFGTBL_Trans_io_accel2)) && 8397 (h->events & HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_STATE_CHANGE || 8398 h->events & HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_CONFIG_CHANGE)) { 8399 8400 if (h->events & HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_STATE_CHANGE) 8401 event_type = "state change"; 8402 if (h->events & HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_CONFIG_CHANGE) 8403 event_type = "configuration change"; 8404 /* Stop sending new RAID offload reqs via the IO accelerator */ 8405 scsi_block_requests(h->scsi_host); 8406 hpsa_set_ioaccel_status(h); 8407 hpsa_drain_accel_commands(h); 8408 /* Set 'accelerator path config change' bit */ 8409 dev_warn(&h->pdev->dev, 8410 "Acknowledging event: 0x%08x (HP SSD Smart Path %s)\n", 8411 h->events, event_type); 8412 writel(h->events, &(h->cfgtable->clear_event_notify)); 8413 /* Set the "clear event notify field update" bit 6 */ 8414 writel(DOORBELL_CLEAR_EVENTS, h->vaddr + SA5_DOORBELL); 8415 /* Wait until ctlr clears 'clear event notify field', bit 6 */ 8416 hpsa_wait_for_clear_event_notify_ack(h); 8417 scsi_unblock_requests(h->scsi_host); 8418 } else { 8419 /* Acknowledge controller notification events. */ 8420 writel(h->events, &(h->cfgtable->clear_event_notify)); 8421 writel(DOORBELL_CLEAR_EVENTS, h->vaddr + SA5_DOORBELL); 8422 hpsa_wait_for_clear_event_notify_ack(h); 8423 } 8424 return; 8425} 8426 8427/* Check a register on the controller to see if there are configuration 8428 * changes (added/changed/removed logical drives, etc.) which mean that 8429 * we should rescan the controller for devices. 8430 * Also check flag for driver-initiated rescan. 8431 */ 8432static int hpsa_ctlr_needs_rescan(struct ctlr_info *h) 8433{ 8434 if (h->drv_req_rescan) { 8435 h->drv_req_rescan = 0; 8436 return 1; 8437 } 8438 8439 if (!(h->fw_support & MISC_FW_EVENT_NOTIFY)) 8440 return 0; 8441 8442 h->events = readl(&(h->cfgtable->event_notify)); 8443 return h->events & RESCAN_REQUIRED_EVENT_BITS; 8444} 8445 8446/* 8447 * Check if any of the offline devices have become ready 8448 */ 8449static int hpsa_offline_devices_ready(struct ctlr_info *h) 8450{ 8451 unsigned long flags; 8452 struct offline_device_entry *d; 8453 struct list_head *this, *tmp; 8454 8455 spin_lock_irqsave(&h->offline_device_lock, flags); 8456 list_for_each_safe(this, tmp, &h->offline_device_list) { 8457 d = list_entry(this, struct offline_device_entry, 8458 offline_list); 8459 spin_unlock_irqrestore(&h->offline_device_lock, flags); 8460 if (!hpsa_volume_offline(h, d->scsi3addr)) { 8461 spin_lock_irqsave(&h->offline_device_lock, flags); 8462 list_del(&d->offline_list); 8463 spin_unlock_irqrestore(&h->offline_device_lock, flags); 8464 return 1; 8465 } 8466 spin_lock_irqsave(&h->offline_device_lock, flags); 8467 } 8468 spin_unlock_irqrestore(&h->offline_device_lock, flags); 8469 return 0; 8470} 8471 8472static int hpsa_luns_changed(struct ctlr_info *h) 8473{ 8474 int rc = 1; /* assume there are changes */ 8475 struct ReportLUNdata *logdev = NULL; 8476 8477 /* if we can't find out if lun data has changed, 8478 * assume that it has. 8479 */ 8480 8481 if (!h->lastlogicals) 8482 return rc; 8483 8484 logdev = kzalloc(sizeof(*logdev), GFP_KERNEL); 8485 if (!logdev) 8486 return rc; 8487 8488 if (hpsa_scsi_do_report_luns(h, 1, logdev, sizeof(*logdev), 0)) { 8489 dev_warn(&h->pdev->dev, 8490 "report luns failed, can't track lun changes.\n"); 8491 goto out; 8492 } 8493 if (memcmp(logdev, h->lastlogicals, sizeof(*logdev))) { 8494 dev_info(&h->pdev->dev, 8495 "Lun changes detected.\n"); 8496 memcpy(h->lastlogicals, logdev, sizeof(*logdev)); 8497 goto out; 8498 } else 8499 rc = 0; /* no changes detected. */ 8500out: 8501 kfree(logdev); 8502 return rc; 8503} 8504 8505static void hpsa_perform_rescan(struct ctlr_info *h) 8506{ 8507 struct Scsi_Host *sh = NULL; 8508 unsigned long flags; 8509 8510 /* 8511 * Do the scan after the reset 8512 */ 8513 spin_lock_irqsave(&h->reset_lock, flags); 8514 if (h->reset_in_progress) { 8515 h->drv_req_rescan = 1; 8516 spin_unlock_irqrestore(&h->reset_lock, flags); 8517 return; 8518 } 8519 spin_unlock_irqrestore(&h->reset_lock, flags); 8520 8521 sh = scsi_host_get(h->scsi_host); 8522 if (sh != NULL) { 8523 hpsa_scan_start(sh); 8524 scsi_host_put(sh); 8525 h->drv_req_rescan = 0; 8526 } 8527} 8528 8529/* 8530 * watch for controller events 8531 */ 8532static void hpsa_event_monitor_worker(struct work_struct *work) 8533{ 8534 struct ctlr_info *h = container_of(to_delayed_work(work), 8535 struct ctlr_info, event_monitor_work); 8536 unsigned long flags; 8537 8538 spin_lock_irqsave(&h->lock, flags); 8539 if (h->remove_in_progress) { 8540 spin_unlock_irqrestore(&h->lock, flags); 8541 return; 8542 } 8543 spin_unlock_irqrestore(&h->lock, flags); 8544 8545 if (hpsa_ctlr_needs_rescan(h)) { 8546 hpsa_ack_ctlr_events(h); 8547 hpsa_perform_rescan(h); 8548 } 8549 8550 spin_lock_irqsave(&h->lock, flags); 8551 if (!h->remove_in_progress) 8552 queue_delayed_work(h->monitor_ctlr_wq, &h->event_monitor_work, 8553 HPSA_EVENT_MONITOR_INTERVAL); 8554 spin_unlock_irqrestore(&h->lock, flags); 8555} 8556 8557static void hpsa_rescan_ctlr_worker(struct work_struct *work) 8558{ 8559 unsigned long flags; 8560 struct ctlr_info *h = container_of(to_delayed_work(work), 8561 struct ctlr_info, rescan_ctlr_work); 8562 8563 spin_lock_irqsave(&h->lock, flags); 8564 if (h->remove_in_progress) { 8565 spin_unlock_irqrestore(&h->lock, flags); 8566 return; 8567 } 8568 spin_unlock_irqrestore(&h->lock, flags); 8569 8570 if (h->drv_req_rescan || hpsa_offline_devices_ready(h)) { 8571 hpsa_perform_rescan(h); 8572 } else if (h->discovery_polling) { 8573 if (hpsa_luns_changed(h)) { 8574 dev_info(&h->pdev->dev, 8575 "driver discovery polling rescan.\n"); 8576 hpsa_perform_rescan(h); 8577 } 8578 } 8579 spin_lock_irqsave(&h->lock, flags); 8580 if (!h->remove_in_progress) 8581 queue_delayed_work(h->rescan_ctlr_wq, &h->rescan_ctlr_work, 8582 h->heartbeat_sample_interval); 8583 spin_unlock_irqrestore(&h->lock, flags); 8584} 8585 8586static void hpsa_monitor_ctlr_worker(struct work_struct *work) 8587{ 8588 unsigned long flags; 8589 struct ctlr_info *h = container_of(to_delayed_work(work), 8590 struct ctlr_info, monitor_ctlr_work); 8591 8592 detect_controller_lockup(h); 8593 if (lockup_detected(h)) 8594 return; 8595 8596 spin_lock_irqsave(&h->lock, flags); 8597 if (!h->remove_in_progress) 8598 queue_delayed_work(h->monitor_ctlr_wq, &h->monitor_ctlr_work, 8599 h->heartbeat_sample_interval); 8600 spin_unlock_irqrestore(&h->lock, flags); 8601} 8602 8603static struct workqueue_struct *hpsa_create_controller_wq(struct ctlr_info *h, 8604 char *name) 8605{ 8606 struct workqueue_struct *wq = NULL; 8607 8608 wq = alloc_ordered_workqueue("%s_%d_hpsa", 0, name, h->ctlr); 8609 if (!wq) 8610 dev_err(&h->pdev->dev, "failed to create %s workqueue\n", name); 8611 8612 return wq; 8613} 8614 8615static void hpda_free_ctlr_info(struct ctlr_info *h) 8616{ 8617 kfree(h->reply_map); 8618 kfree(h); 8619} 8620 8621static struct ctlr_info *hpda_alloc_ctlr_info(void) 8622{ 8623 struct ctlr_info *h; 8624 8625 h = kzalloc(sizeof(*h), GFP_KERNEL); 8626 if (!h) 8627 return NULL; 8628 8629 h->reply_map = kcalloc(nr_cpu_ids, sizeof(*h->reply_map), GFP_KERNEL); 8630 if (!h->reply_map) { 8631 kfree(h); 8632 return NULL; 8633 } 8634 return h; 8635} 8636 8637static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) 8638{ 8639 int dac, rc; 8640 struct ctlr_info *h; 8641 int try_soft_reset = 0; 8642 unsigned long flags; 8643 u32 board_id; 8644 8645 if (number_of_controllers == 0) 8646 printk(KERN_INFO DRIVER_NAME "\n"); 8647 8648 rc = hpsa_lookup_board_id(pdev, &board_id, NULL); 8649 if (rc < 0) { 8650 dev_warn(&pdev->dev, "Board ID not found\n"); 8651 return rc; 8652 } 8653 8654 rc = hpsa_init_reset_devices(pdev, board_id); 8655 if (rc) { 8656 if (rc != -ENOTSUPP) 8657 return rc; 8658 /* If the reset fails in a particular way (it has no way to do 8659 * a proper hard reset, so returns -ENOTSUPP) we can try to do 8660 * a soft reset once we get the controller configured up to the 8661 * point that it can accept a command. 8662 */ 8663 try_soft_reset = 1; 8664 rc = 0; 8665 } 8666 8667reinit_after_soft_reset: 8668 8669 /* Command structures must be aligned on a 32-byte boundary because 8670 * the 5 lower bits of the address are used by the hardware. and by 8671 * the driver. See comments in hpsa.h for more info. 8672 */ 8673 BUILD_BUG_ON(sizeof(struct CommandList) % COMMANDLIST_ALIGNMENT); 8674 h = hpda_alloc_ctlr_info(); 8675 if (!h) { 8676 dev_err(&pdev->dev, "Failed to allocate controller head\n"); 8677 return -ENOMEM; 8678 } 8679 8680 h->pdev = pdev; 8681 8682 h->intr_mode = hpsa_simple_mode ? SIMPLE_MODE_INT : PERF_MODE_INT; 8683 INIT_LIST_HEAD(&h->offline_device_list); 8684 spin_lock_init(&h->lock); 8685 spin_lock_init(&h->offline_device_lock); 8686 spin_lock_init(&h->scan_lock); 8687 spin_lock_init(&h->reset_lock); 8688 atomic_set(&h->passthru_cmds_avail, HPSA_MAX_CONCURRENT_PASSTHRUS); 8689 8690 /* Allocate and clear per-cpu variable lockup_detected */ 8691 h->lockup_detected = alloc_percpu(u32); 8692 if (!h->lockup_detected) { 8693 dev_err(&h->pdev->dev, "Failed to allocate lockup detector\n"); 8694 rc = -ENOMEM; 8695 goto clean1; /* aer/h */ 8696 } 8697 set_lockup_detected_for_all_cpus(h, 0); 8698 8699 rc = hpsa_pci_init(h); 8700 if (rc) 8701 goto clean2; /* lu, aer/h */ 8702 8703 /* relies on h-> settings made by hpsa_pci_init, including 8704 * interrupt_mode h->intr */ 8705 rc = hpsa_scsi_host_alloc(h); 8706 if (rc) 8707 goto clean2_5; /* pci, lu, aer/h */ 8708 8709 sprintf(h->devname, HPSA "%d", h->scsi_host->host_no); 8710 h->ctlr = number_of_controllers; 8711 number_of_controllers++; 8712 8713 /* configure PCI DMA stuff */ 8714 rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)); 8715 if (rc == 0) { 8716 dac = 1; 8717 } else { 8718 rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); 8719 if (rc == 0) { 8720 dac = 0; 8721 } else { 8722 dev_err(&pdev->dev, "no suitable DMA available\n"); 8723 goto clean3; /* shost, pci, lu, aer/h */ 8724 } 8725 } 8726 8727 /* make sure the board interrupts are off */ 8728 h->access.set_intr_mask(h, HPSA_INTR_OFF); 8729 8730 rc = hpsa_request_irqs(h, do_hpsa_intr_msi, do_hpsa_intr_intx); 8731 if (rc) 8732 goto clean3; /* shost, pci, lu, aer/h */ 8733 rc = hpsa_alloc_cmd_pool(h); 8734 if (rc) 8735 goto clean4; /* irq, shost, pci, lu, aer/h */ 8736 rc = hpsa_alloc_sg_chain_blocks(h); 8737 if (rc) 8738 goto clean5; /* cmd, irq, shost, pci, lu, aer/h */ 8739 init_waitqueue_head(&h->scan_wait_queue); 8740 init_waitqueue_head(&h->event_sync_wait_queue); 8741 mutex_init(&h->reset_mutex); 8742 h->scan_finished = 1; /* no scan currently in progress */ 8743 h->scan_waiting = 0; 8744 8745 pci_set_drvdata(pdev, h); 8746 h->ndevices = 0; 8747 8748 spin_lock_init(&h->devlock); 8749 rc = hpsa_put_ctlr_into_performant_mode(h); 8750 if (rc) 8751 goto clean6; /* sg, cmd, irq, shost, pci, lu, aer/h */ 8752 8753 /* create the resubmit workqueue */ 8754 h->rescan_ctlr_wq = hpsa_create_controller_wq(h, "rescan"); 8755 if (!h->rescan_ctlr_wq) { 8756 rc = -ENOMEM; 8757 goto clean7; 8758 } 8759 8760 h->resubmit_wq = hpsa_create_controller_wq(h, "resubmit"); 8761 if (!h->resubmit_wq) { 8762 rc = -ENOMEM; 8763 goto clean7; /* aer/h */ 8764 } 8765 8766 h->monitor_ctlr_wq = hpsa_create_controller_wq(h, "monitor"); 8767 if (!h->monitor_ctlr_wq) { 8768 rc = -ENOMEM; 8769 goto clean7; 8770 } 8771 8772 /* 8773 * At this point, the controller is ready to take commands. 8774 * Now, if reset_devices and the hard reset didn't work, try 8775 * the soft reset and see if that works. 8776 */ 8777 if (try_soft_reset) { 8778 8779 /* This is kind of gross. We may or may not get a completion 8780 * from the soft reset command, and if we do, then the value 8781 * from the fifo may or may not be valid. So, we wait 10 secs 8782 * after the reset throwing away any completions we get during 8783 * that time. Unregister the interrupt handler and register 8784 * fake ones to scoop up any residual completions. 8785 */ 8786 spin_lock_irqsave(&h->lock, flags); 8787 h->access.set_intr_mask(h, HPSA_INTR_OFF); 8788 spin_unlock_irqrestore(&h->lock, flags); 8789 hpsa_free_irqs(h); 8790 rc = hpsa_request_irqs(h, hpsa_msix_discard_completions, 8791 hpsa_intx_discard_completions); 8792 if (rc) { 8793 dev_warn(&h->pdev->dev, 8794 "Failed to request_irq after soft reset.\n"); 8795 /* 8796 * cannot goto clean7 or free_irqs will be called 8797 * again. Instead, do its work 8798 */ 8799 hpsa_free_performant_mode(h); /* clean7 */ 8800 hpsa_free_sg_chain_blocks(h); /* clean6 */ 8801 hpsa_free_cmd_pool(h); /* clean5 */ 8802 /* 8803 * skip hpsa_free_irqs(h) clean4 since that 8804 * was just called before request_irqs failed 8805 */ 8806 goto clean3; 8807 } 8808 8809 rc = hpsa_kdump_soft_reset(h); 8810 if (rc) 8811 /* Neither hard nor soft reset worked, we're hosed. */ 8812 goto clean7; 8813 8814 dev_info(&h->pdev->dev, "Board READY.\n"); 8815 dev_info(&h->pdev->dev, 8816 "Waiting for stale completions to drain.\n"); 8817 h->access.set_intr_mask(h, HPSA_INTR_ON); 8818 msleep(10000); 8819 h->access.set_intr_mask(h, HPSA_INTR_OFF); 8820 8821 rc = controller_reset_failed(h->cfgtable); 8822 if (rc) 8823 dev_info(&h->pdev->dev, 8824 "Soft reset appears to have failed.\n"); 8825 8826 /* since the controller's reset, we have to go back and re-init 8827 * everything. Easiest to just forget what we've done and do it 8828 * all over again. 8829 */ 8830 hpsa_undo_allocations_after_kdump_soft_reset(h); 8831 try_soft_reset = 0; 8832 if (rc) 8833 /* don't goto clean, we already unallocated */ 8834 return -ENODEV; 8835 8836 goto reinit_after_soft_reset; 8837 } 8838 8839 /* Enable Accelerated IO path at driver layer */ 8840 h->acciopath_status = 1; 8841 /* Disable discovery polling.*/ 8842 h->discovery_polling = 0; 8843 8844 8845 /* Turn the interrupts on so we can service requests */ 8846 h->access.set_intr_mask(h, HPSA_INTR_ON); 8847 8848 hpsa_hba_inquiry(h); 8849 8850 h->lastlogicals = kzalloc(sizeof(*(h->lastlogicals)), GFP_KERNEL); 8851 if (!h->lastlogicals) 8852 dev_info(&h->pdev->dev, 8853 "Can't track change to report lun data\n"); 8854 8855 /* hook into SCSI subsystem */ 8856 rc = hpsa_scsi_add_host(h); 8857 if (rc) 8858 goto clean8; /* lastlogicals, perf, sg, cmd, irq, shost, pci, lu, aer/h */ 8859 8860 /* Monitor the controller for firmware lockups */ 8861 h->heartbeat_sample_interval = HEARTBEAT_SAMPLE_INTERVAL; 8862 INIT_DELAYED_WORK(&h->monitor_ctlr_work, hpsa_monitor_ctlr_worker); 8863 schedule_delayed_work(&h->monitor_ctlr_work, 8864 h->heartbeat_sample_interval); 8865 INIT_DELAYED_WORK(&h->rescan_ctlr_work, hpsa_rescan_ctlr_worker); 8866 queue_delayed_work(h->rescan_ctlr_wq, &h->rescan_ctlr_work, 8867 h->heartbeat_sample_interval); 8868 INIT_DELAYED_WORK(&h->event_monitor_work, hpsa_event_monitor_worker); 8869 schedule_delayed_work(&h->event_monitor_work, 8870 HPSA_EVENT_MONITOR_INTERVAL); 8871 return 0; 8872 8873clean8: /* lastlogicals, perf, sg, cmd, irq, shost, pci, lu, aer/h */ 8874 kfree(h->lastlogicals); 8875clean7: /* perf, sg, cmd, irq, shost, pci, lu, aer/h */ 8876 hpsa_free_performant_mode(h); 8877 h->access.set_intr_mask(h, HPSA_INTR_OFF); 8878clean6: /* sg, cmd, irq, pci, lockup, wq/aer/h */ 8879 hpsa_free_sg_chain_blocks(h); 8880clean5: /* cmd, irq, shost, pci, lu, aer/h */ 8881 hpsa_free_cmd_pool(h); 8882clean4: /* irq, shost, pci, lu, aer/h */ 8883 hpsa_free_irqs(h); 8884clean3: /* shost, pci, lu, aer/h */ 8885 scsi_host_put(h->scsi_host); 8886 h->scsi_host = NULL; 8887clean2_5: /* pci, lu, aer/h */ 8888 hpsa_free_pci_init(h); 8889clean2: /* lu, aer/h */ 8890 if (h->lockup_detected) { 8891 free_percpu(h->lockup_detected); 8892 h->lockup_detected = NULL; 8893 } 8894clean1: /* wq/aer/h */ 8895 if (h->resubmit_wq) { 8896 destroy_workqueue(h->resubmit_wq); 8897 h->resubmit_wq = NULL; 8898 } 8899 if (h->rescan_ctlr_wq) { 8900 destroy_workqueue(h->rescan_ctlr_wq); 8901 h->rescan_ctlr_wq = NULL; 8902 } 8903 if (h->monitor_ctlr_wq) { 8904 destroy_workqueue(h->monitor_ctlr_wq); 8905 h->monitor_ctlr_wq = NULL; 8906 } 8907 hpda_free_ctlr_info(h); 8908 return rc; 8909} 8910 8911static void hpsa_flush_cache(struct ctlr_info *h) 8912{ 8913 char *flush_buf; 8914 struct CommandList *c; 8915 int rc; 8916 8917 if (unlikely(lockup_detected(h))) 8918 return; 8919 flush_buf = kzalloc(4, GFP_KERNEL); 8920 if (!flush_buf) 8921 return; 8922 8923 c = cmd_alloc(h); 8924 8925 if (fill_cmd(c, HPSA_CACHE_FLUSH, h, flush_buf, 4, 0, 8926 RAID_CTLR_LUNID, TYPE_CMD)) { 8927 goto out; 8928 } 8929 rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_TO_DEVICE, 8930 DEFAULT_TIMEOUT); 8931 if (rc) 8932 goto out; 8933 if (c->err_info->CommandStatus != 0) 8934out: 8935 dev_warn(&h->pdev->dev, 8936 "error flushing cache on controller\n"); 8937 cmd_free(h, c); 8938 kfree(flush_buf); 8939} 8940 8941/* Make controller gather fresh report lun data each time we 8942 * send down a report luns request 8943 */ 8944static void hpsa_disable_rld_caching(struct ctlr_info *h) 8945{ 8946 u32 *options; 8947 struct CommandList *c; 8948 int rc; 8949 8950 /* Don't bother trying to set diag options if locked up */ 8951 if (unlikely(h->lockup_detected)) 8952 return; 8953 8954 options = kzalloc(sizeof(*options), GFP_KERNEL); 8955 if (!options) 8956 return; 8957 8958 c = cmd_alloc(h); 8959 8960 /* first, get the current diag options settings */ 8961 if (fill_cmd(c, BMIC_SENSE_DIAG_OPTIONS, h, options, 4, 0, 8962 RAID_CTLR_LUNID, TYPE_CMD)) 8963 goto errout; 8964 8965 rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE, 8966 NO_TIMEOUT); 8967 if ((rc != 0) || (c->err_info->CommandStatus != 0)) 8968 goto errout; 8969 8970 /* Now, set the bit for disabling the RLD caching */ 8971 *options |= HPSA_DIAG_OPTS_DISABLE_RLD_CACHING; 8972 8973 if (fill_cmd(c, BMIC_SET_DIAG_OPTIONS, h, options, 4, 0, 8974 RAID_CTLR_LUNID, TYPE_CMD)) 8975 goto errout; 8976 8977 rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_TO_DEVICE, 8978 NO_TIMEOUT); 8979 if ((rc != 0) || (c->err_info->CommandStatus != 0)) 8980 goto errout; 8981 8982 /* Now verify that it got set: */ 8983 if (fill_cmd(c, BMIC_SENSE_DIAG_OPTIONS, h, options, 4, 0, 8984 RAID_CTLR_LUNID, TYPE_CMD)) 8985 goto errout; 8986 8987 rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE, 8988 NO_TIMEOUT); 8989 if ((rc != 0) || (c->err_info->CommandStatus != 0)) 8990 goto errout; 8991 8992 if (*options & HPSA_DIAG_OPTS_DISABLE_RLD_CACHING) 8993 goto out; 8994 8995errout: 8996 dev_err(&h->pdev->dev, 8997 "Error: failed to disable report lun data caching.\n"); 8998out: 8999 cmd_free(h, c); 9000 kfree(options); 9001} 9002 9003static void __hpsa_shutdown(struct pci_dev *pdev) 9004{ 9005 struct ctlr_info *h; 9006 9007 h = pci_get_drvdata(pdev); 9008 /* Turn board interrupts off and send the flush cache command 9009 * sendcmd will turn off interrupt, and send the flush... 9010 * To write all data in the battery backed cache to disks 9011 */ 9012 hpsa_flush_cache(h); 9013 h->access.set_intr_mask(h, HPSA_INTR_OFF); 9014 hpsa_free_irqs(h); /* init_one 4 */ 9015 hpsa_disable_interrupt_mode(h); /* pci_init 2 */ 9016} 9017 9018static void hpsa_shutdown(struct pci_dev *pdev) 9019{ 9020 __hpsa_shutdown(pdev); 9021 pci_disable_device(pdev); 9022} 9023 9024static void hpsa_free_device_info(struct ctlr_info *h) 9025{ 9026 int i; 9027 9028 for (i = 0; i < h->ndevices; i++) { 9029 kfree(h->dev[i]); 9030 h->dev[i] = NULL; 9031 } 9032} 9033 9034static void hpsa_remove_one(struct pci_dev *pdev) 9035{ 9036 struct ctlr_info *h; 9037 unsigned long flags; 9038 9039 if (pci_get_drvdata(pdev) == NULL) { 9040 dev_err(&pdev->dev, "unable to remove device\n"); 9041 return; 9042 } 9043 h = pci_get_drvdata(pdev); 9044 9045 /* Get rid of any controller monitoring work items */ 9046 spin_lock_irqsave(&h->lock, flags); 9047 h->remove_in_progress = 1; 9048 spin_unlock_irqrestore(&h->lock, flags); 9049 cancel_delayed_work_sync(&h->monitor_ctlr_work); 9050 cancel_delayed_work_sync(&h->rescan_ctlr_work); 9051 cancel_delayed_work_sync(&h->event_monitor_work); 9052 destroy_workqueue(h->rescan_ctlr_wq); 9053 destroy_workqueue(h->resubmit_wq); 9054 destroy_workqueue(h->monitor_ctlr_wq); 9055 9056 hpsa_delete_sas_host(h); 9057 9058 /* 9059 * Call before disabling interrupts. 9060 * scsi_remove_host can trigger I/O operations especially 9061 * when multipath is enabled. There can be SYNCHRONIZE CACHE 9062 * operations which cannot complete and will hang the system. 9063 */ 9064 if (h->scsi_host) 9065 scsi_remove_host(h->scsi_host); /* init_one 8 */ 9066 /* includes hpsa_free_irqs - init_one 4 */ 9067 /* includes hpsa_disable_interrupt_mode - pci_init 2 */ 9068 __hpsa_shutdown(pdev); 9069 9070 hpsa_free_device_info(h); /* scan */ 9071 9072 kfree(h->hba_inquiry_data); /* init_one 10 */ 9073 h->hba_inquiry_data = NULL; /* init_one 10 */ 9074 hpsa_free_ioaccel2_sg_chain_blocks(h); 9075 hpsa_free_performant_mode(h); /* init_one 7 */ 9076 hpsa_free_sg_chain_blocks(h); /* init_one 6 */ 9077 hpsa_free_cmd_pool(h); /* init_one 5 */ 9078 kfree(h->lastlogicals); 9079 9080 /* hpsa_free_irqs already called via hpsa_shutdown init_one 4 */ 9081 9082 scsi_host_put(h->scsi_host); /* init_one 3 */ 9083 h->scsi_host = NULL; /* init_one 3 */ 9084 9085 /* includes hpsa_disable_interrupt_mode - pci_init 2 */ 9086 hpsa_free_pci_init(h); /* init_one 2.5 */ 9087 9088 free_percpu(h->lockup_detected); /* init_one 2 */ 9089 h->lockup_detected = NULL; /* init_one 2 */ 9090 /* (void) pci_disable_pcie_error_reporting(pdev); */ /* init_one 1 */ 9091 9092 hpda_free_ctlr_info(h); /* init_one 1 */ 9093} 9094 9095static int hpsa_suspend(__attribute__((unused)) struct pci_dev *pdev, 9096 __attribute__((unused)) pm_message_t state) 9097{ 9098 return -ENOSYS; 9099} 9100 9101static int hpsa_resume(__attribute__((unused)) struct pci_dev *pdev) 9102{ 9103 return -ENOSYS; 9104} 9105 9106static struct pci_driver hpsa_pci_driver = { 9107 .name = HPSA, 9108 .probe = hpsa_init_one, 9109 .remove = hpsa_remove_one, 9110 .id_table = hpsa_pci_device_id, /* id_table */ 9111 .shutdown = hpsa_shutdown, 9112 .suspend = hpsa_suspend, 9113 .resume = hpsa_resume, 9114}; 9115 9116/* Fill in bucket_map[], given nsgs (the max number of 9117 * scatter gather elements supported) and bucket[], 9118 * which is an array of 8 integers. The bucket[] array 9119 * contains 8 different DMA transfer sizes (in 16 9120 * byte increments) which the controller uses to fetch 9121 * commands. This function fills in bucket_map[], which 9122 * maps a given number of scatter gather elements to one of 9123 * the 8 DMA transfer sizes. The point of it is to allow the 9124 * controller to only do as much DMA as needed to fetch the 9125 * command, with the DMA transfer size encoded in the lower 9126 * bits of the command address. 9127 */ 9128static void calc_bucket_map(int bucket[], int num_buckets, 9129 int nsgs, int min_blocks, u32 *bucket_map) 9130{ 9131 int i, j, b, size; 9132 9133 /* Note, bucket_map must have nsgs+1 entries. */ 9134 for (i = 0; i <= nsgs; i++) { 9135 /* Compute size of a command with i SG entries */ 9136 size = i + min_blocks; 9137 b = num_buckets; /* Assume the biggest bucket */ 9138 /* Find the bucket that is just big enough */ 9139 for (j = 0; j < num_buckets; j++) { 9140 if (bucket[j] >= size) { 9141 b = j; 9142 break; 9143 } 9144 } 9145 /* for a command with i SG entries, use bucket b. */ 9146 bucket_map[i] = b; 9147 } 9148} 9149 9150/* 9151 * return -ENODEV on err, 0 on success (or no action) 9152 * allocates numerous items that must be freed later 9153 */ 9154static int hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support) 9155{ 9156 int i; 9157 unsigned long register_value; 9158 unsigned long transMethod = CFGTBL_Trans_Performant | 9159 (trans_support & CFGTBL_Trans_use_short_tags) | 9160 CFGTBL_Trans_enable_directed_msix | 9161 (trans_support & (CFGTBL_Trans_io_accel1 | 9162 CFGTBL_Trans_io_accel2)); 9163 struct access_method access = SA5_performant_access; 9164 9165 /* This is a bit complicated. There are 8 registers on 9166 * the controller which we write to to tell it 8 different 9167 * sizes of commands which there may be. It's a way of 9168 * reducing the DMA done to fetch each command. Encoded into 9169 * each command's tag are 3 bits which communicate to the controller 9170 * which of the eight sizes that command fits within. The size of 9171 * each command depends on how many scatter gather entries there are. 9172 * Each SG entry requires 16 bytes. The eight registers are programmed 9173 * with the number of 16-byte blocks a command of that size requires. 9174 * The smallest command possible requires 5 such 16 byte blocks. 9175 * the largest command possible requires SG_ENTRIES_IN_CMD + 4 16-byte 9176 * blocks. Note, this only extends to the SG entries contained 9177 * within the command block, and does not extend to chained blocks 9178 * of SG elements. bft[] contains the eight values we write to 9179 * the registers. They are not evenly distributed, but have more 9180 * sizes for small commands, and fewer sizes for larger commands. 9181 */ 9182 int bft[8] = {5, 6, 8, 10, 12, 20, 28, SG_ENTRIES_IN_CMD + 4}; 9183#define MIN_IOACCEL2_BFT_ENTRY 5 9184#define HPSA_IOACCEL2_HEADER_SZ 4 9185 int bft2[16] = {MIN_IOACCEL2_BFT_ENTRY, 6, 7, 8, 9, 10, 11, 12, 9186 13, 14, 15, 16, 17, 18, 19, 9187 HPSA_IOACCEL2_HEADER_SZ + IOACCEL2_MAXSGENTRIES}; 9188 BUILD_BUG_ON(ARRAY_SIZE(bft2) != 16); 9189 BUILD_BUG_ON(ARRAY_SIZE(bft) != 8); 9190 BUILD_BUG_ON(offsetof(struct io_accel2_cmd, sg) > 9191 16 * MIN_IOACCEL2_BFT_ENTRY); 9192 BUILD_BUG_ON(sizeof(struct ioaccel2_sg_element) != 16); 9193 BUILD_BUG_ON(28 > SG_ENTRIES_IN_CMD + 4); 9194 /* 5 = 1 s/g entry or 4k 9195 * 6 = 2 s/g entry or 8k 9196 * 8 = 4 s/g entry or 16k 9197 * 10 = 6 s/g entry or 24k 9198 */ 9199 9200 /* If the controller supports either ioaccel method then 9201 * we can also use the RAID stack submit path that does not 9202 * perform the superfluous readl() after each command submission. 9203 */ 9204 if (trans_support & (CFGTBL_Trans_io_accel1 | CFGTBL_Trans_io_accel2)) 9205 access = SA5_performant_access_no_read; 9206 9207 /* Controller spec: zero out this buffer. */ 9208 for (i = 0; i < h->nreply_queues; i++) 9209 memset(h->reply_queue[i].head, 0, h->reply_queue_size); 9210 9211 bft[7] = SG_ENTRIES_IN_CMD + 4; 9212 calc_bucket_map(bft, ARRAY_SIZE(bft), 9213 SG_ENTRIES_IN_CMD, 4, h->blockFetchTable); 9214 for (i = 0; i < 8; i++) 9215 writel(bft[i], &h->transtable->BlockFetch[i]); 9216 9217 /* size of controller ring buffer */ 9218 writel(h->max_commands, &h->transtable->RepQSize); 9219 writel(h->nreply_queues, &h->transtable->RepQCount); 9220 writel(0, &h->transtable->RepQCtrAddrLow32); 9221 writel(0, &h->transtable->RepQCtrAddrHigh32); 9222 9223 for (i = 0; i < h->nreply_queues; i++) { 9224 writel(0, &h->transtable->RepQAddr[i].upper); 9225 writel(h->reply_queue[i].busaddr, 9226 &h->transtable->RepQAddr[i].lower); 9227 } 9228 9229 writel(0, &h->cfgtable->HostWrite.command_pool_addr_hi); 9230 writel(transMethod, &(h->cfgtable->HostWrite.TransportRequest)); 9231 /* 9232 * enable outbound interrupt coalescing in accelerator mode; 9233 */ 9234 if (trans_support & CFGTBL_Trans_io_accel1) { 9235 access = SA5_ioaccel_mode1_access; 9236 writel(10, &h->cfgtable->HostWrite.CoalIntDelay); 9237 writel(4, &h->cfgtable->HostWrite.CoalIntCount); 9238 } else 9239 if (trans_support & CFGTBL_Trans_io_accel2) 9240 access = SA5_ioaccel_mode2_access; 9241 writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL); 9242 if (hpsa_wait_for_mode_change_ack(h)) { 9243 dev_err(&h->pdev->dev, 9244 "performant mode problem - doorbell timeout\n"); 9245 return -ENODEV; 9246 } 9247 register_value = readl(&(h->cfgtable->TransportActive)); 9248 if (!(register_value & CFGTBL_Trans_Performant)) { 9249 dev_err(&h->pdev->dev, 9250 "performant mode problem - transport not active\n"); 9251 return -ENODEV; 9252 } 9253 /* Change the access methods to the performant access methods */ 9254 h->access = access; 9255 h->transMethod = transMethod; 9256 9257 if (!((trans_support & CFGTBL_Trans_io_accel1) || 9258 (trans_support & CFGTBL_Trans_io_accel2))) 9259 return 0; 9260 9261 if (trans_support & CFGTBL_Trans_io_accel1) { 9262 /* Set up I/O accelerator mode */ 9263 for (i = 0; i < h->nreply_queues; i++) { 9264 writel(i, h->vaddr + IOACCEL_MODE1_REPLY_QUEUE_INDEX); 9265 h->reply_queue[i].current_entry = 9266 readl(h->vaddr + IOACCEL_MODE1_PRODUCER_INDEX); 9267 } 9268 bft[7] = h->ioaccel_maxsg + 8; 9269 calc_bucket_map(bft, ARRAY_SIZE(bft), h->ioaccel_maxsg, 8, 9270 h->ioaccel1_blockFetchTable); 9271 9272 /* initialize all reply queue entries to unused */ 9273 for (i = 0; i < h->nreply_queues; i++) 9274 memset(h->reply_queue[i].head, 9275 (u8) IOACCEL_MODE1_REPLY_UNUSED, 9276 h->reply_queue_size); 9277 9278 /* set all the constant fields in the accelerator command 9279 * frames once at init time to save CPU cycles later. 9280 */ 9281 for (i = 0; i < h->nr_cmds; i++) { 9282 struct io_accel1_cmd *cp = &h->ioaccel_cmd_pool[i]; 9283 9284 cp->function = IOACCEL1_FUNCTION_SCSIIO; 9285 cp->err_info = (u32) (h->errinfo_pool_dhandle + 9286 (i * sizeof(struct ErrorInfo))); 9287 cp->err_info_len = sizeof(struct ErrorInfo); 9288 cp->sgl_offset = IOACCEL1_SGLOFFSET; 9289 cp->host_context_flags = 9290 cpu_to_le16(IOACCEL1_HCFLAGS_CISS_FORMAT); 9291 cp->timeout_sec = 0; 9292 cp->ReplyQueue = 0; 9293 cp->tag = 9294 cpu_to_le64((i << DIRECT_LOOKUP_SHIFT)); 9295 cp->host_addr = 9296 cpu_to_le64(h->ioaccel_cmd_pool_dhandle + 9297 (i * sizeof(struct io_accel1_cmd))); 9298 } 9299 } else if (trans_support & CFGTBL_Trans_io_accel2) { 9300 u64 cfg_offset, cfg_base_addr_index; 9301 u32 bft2_offset, cfg_base_addr; 9302 int rc; 9303 9304 rc = hpsa_find_cfg_addrs(h->pdev, h->vaddr, &cfg_base_addr, 9305 &cfg_base_addr_index, &cfg_offset); 9306 BUILD_BUG_ON(offsetof(struct io_accel2_cmd, sg) != 64); 9307 bft2[15] = h->ioaccel_maxsg + HPSA_IOACCEL2_HEADER_SZ; 9308 calc_bucket_map(bft2, ARRAY_SIZE(bft2), h->ioaccel_maxsg, 9309 4, h->ioaccel2_blockFetchTable); 9310 bft2_offset = readl(&h->cfgtable->io_accel_request_size_offset); 9311 BUILD_BUG_ON(offsetof(struct CfgTable, 9312 io_accel_request_size_offset) != 0xb8); 9313 h->ioaccel2_bft2_regs = 9314 remap_pci_mem(pci_resource_start(h->pdev, 9315 cfg_base_addr_index) + 9316 cfg_offset + bft2_offset, 9317 ARRAY_SIZE(bft2) * 9318 sizeof(*h->ioaccel2_bft2_regs)); 9319 for (i = 0; i < ARRAY_SIZE(bft2); i++) 9320 writel(bft2[i], &h->ioaccel2_bft2_regs[i]); 9321 } 9322 writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL); 9323 if (hpsa_wait_for_mode_change_ack(h)) { 9324 dev_err(&h->pdev->dev, 9325 "performant mode problem - enabling ioaccel mode\n"); 9326 return -ENODEV; 9327 } 9328 return 0; 9329} 9330 9331/* Free ioaccel1 mode command blocks and block fetch table */ 9332static void hpsa_free_ioaccel1_cmd_and_bft(struct ctlr_info *h) 9333{ 9334 if (h->ioaccel_cmd_pool) { 9335 dma_free_coherent(&h->pdev->dev, 9336 h->nr_cmds * sizeof(*h->ioaccel_cmd_pool), 9337 h->ioaccel_cmd_pool, 9338 h->ioaccel_cmd_pool_dhandle); 9339 h->ioaccel_cmd_pool = NULL; 9340 h->ioaccel_cmd_pool_dhandle = 0; 9341 } 9342 kfree(h->ioaccel1_blockFetchTable); 9343 h->ioaccel1_blockFetchTable = NULL; 9344} 9345 9346/* Allocate ioaccel1 mode command blocks and block fetch table */ 9347static int hpsa_alloc_ioaccel1_cmd_and_bft(struct ctlr_info *h) 9348{ 9349 h->ioaccel_maxsg = 9350 readl(&(h->cfgtable->io_accel_max_embedded_sg_count)); 9351 if (h->ioaccel_maxsg > IOACCEL1_MAXSGENTRIES) 9352 h->ioaccel_maxsg = IOACCEL1_MAXSGENTRIES; 9353 9354 /* Command structures must be aligned on a 128-byte boundary 9355 * because the 7 lower bits of the address are used by the 9356 * hardware. 9357 */ 9358 BUILD_BUG_ON(sizeof(struct io_accel1_cmd) % 9359 IOACCEL1_COMMANDLIST_ALIGNMENT); 9360 h->ioaccel_cmd_pool = 9361 dma_alloc_coherent(&h->pdev->dev, 9362 h->nr_cmds * sizeof(*h->ioaccel_cmd_pool), 9363 &h->ioaccel_cmd_pool_dhandle, GFP_KERNEL); 9364 9365 h->ioaccel1_blockFetchTable = 9366 kmalloc(((h->ioaccel_maxsg + 1) * 9367 sizeof(u32)), GFP_KERNEL); 9368 9369 if ((h->ioaccel_cmd_pool == NULL) || 9370 (h->ioaccel1_blockFetchTable == NULL)) 9371 goto clean_up; 9372 9373 memset(h->ioaccel_cmd_pool, 0, 9374 h->nr_cmds * sizeof(*h->ioaccel_cmd_pool)); 9375 return 0; 9376 9377clean_up: 9378 hpsa_free_ioaccel1_cmd_and_bft(h); 9379 return -ENOMEM; 9380} 9381 9382/* Free ioaccel2 mode command blocks and block fetch table */ 9383static void hpsa_free_ioaccel2_cmd_and_bft(struct ctlr_info *h) 9384{ 9385 hpsa_free_ioaccel2_sg_chain_blocks(h); 9386 9387 if (h->ioaccel2_cmd_pool) { 9388 dma_free_coherent(&h->pdev->dev, 9389 h->nr_cmds * sizeof(*h->ioaccel2_cmd_pool), 9390 h->ioaccel2_cmd_pool, 9391 h->ioaccel2_cmd_pool_dhandle); 9392 h->ioaccel2_cmd_pool = NULL; 9393 h->ioaccel2_cmd_pool_dhandle = 0; 9394 } 9395 kfree(h->ioaccel2_blockFetchTable); 9396 h->ioaccel2_blockFetchTable = NULL; 9397} 9398 9399/* Allocate ioaccel2 mode command blocks and block fetch table */ 9400static int hpsa_alloc_ioaccel2_cmd_and_bft(struct ctlr_info *h) 9401{ 9402 int rc; 9403 9404 /* Allocate ioaccel2 mode command blocks and block fetch table */ 9405 9406 h->ioaccel_maxsg = 9407 readl(&(h->cfgtable->io_accel_max_embedded_sg_count)); 9408 if (h->ioaccel_maxsg > IOACCEL2_MAXSGENTRIES) 9409 h->ioaccel_maxsg = IOACCEL2_MAXSGENTRIES; 9410 9411 BUILD_BUG_ON(sizeof(struct io_accel2_cmd) % 9412 IOACCEL2_COMMANDLIST_ALIGNMENT); 9413 h->ioaccel2_cmd_pool = 9414 dma_alloc_coherent(&h->pdev->dev, 9415 h->nr_cmds * sizeof(*h->ioaccel2_cmd_pool), 9416 &h->ioaccel2_cmd_pool_dhandle, GFP_KERNEL); 9417 9418 h->ioaccel2_blockFetchTable = 9419 kmalloc(((h->ioaccel_maxsg + 1) * 9420 sizeof(u32)), GFP_KERNEL); 9421 9422 if ((h->ioaccel2_cmd_pool == NULL) || 9423 (h->ioaccel2_blockFetchTable == NULL)) { 9424 rc = -ENOMEM; 9425 goto clean_up; 9426 } 9427 9428 rc = hpsa_allocate_ioaccel2_sg_chain_blocks(h); 9429 if (rc) 9430 goto clean_up; 9431 9432 memset(h->ioaccel2_cmd_pool, 0, 9433 h->nr_cmds * sizeof(*h->ioaccel2_cmd_pool)); 9434 return 0; 9435 9436clean_up: 9437 hpsa_free_ioaccel2_cmd_and_bft(h); 9438 return rc; 9439} 9440 9441/* Free items allocated by hpsa_put_ctlr_into_performant_mode */ 9442static void hpsa_free_performant_mode(struct ctlr_info *h) 9443{ 9444 kfree(h->blockFetchTable); 9445 h->blockFetchTable = NULL; 9446 hpsa_free_reply_queues(h); 9447 hpsa_free_ioaccel1_cmd_and_bft(h); 9448 hpsa_free_ioaccel2_cmd_and_bft(h); 9449} 9450 9451/* return -ENODEV on error, 0 on success (or no action) 9452 * allocates numerous items that must be freed later 9453 */ 9454static int hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h) 9455{ 9456 u32 trans_support; 9457 unsigned long transMethod = CFGTBL_Trans_Performant | 9458 CFGTBL_Trans_use_short_tags; 9459 int i, rc; 9460 9461 if (hpsa_simple_mode) 9462 return 0; 9463 9464 trans_support = readl(&(h->cfgtable->TransportSupport)); 9465 if (!(trans_support & PERFORMANT_MODE)) 9466 return 0; 9467 9468 /* Check for I/O accelerator mode support */ 9469 if (trans_support & CFGTBL_Trans_io_accel1) { 9470 transMethod |= CFGTBL_Trans_io_accel1 | 9471 CFGTBL_Trans_enable_directed_msix; 9472 rc = hpsa_alloc_ioaccel1_cmd_and_bft(h); 9473 if (rc) 9474 return rc; 9475 } else if (trans_support & CFGTBL_Trans_io_accel2) { 9476 transMethod |= CFGTBL_Trans_io_accel2 | 9477 CFGTBL_Trans_enable_directed_msix; 9478 rc = hpsa_alloc_ioaccel2_cmd_and_bft(h); 9479 if (rc) 9480 return rc; 9481 } 9482 9483 h->nreply_queues = h->msix_vectors > 0 ? h->msix_vectors : 1; 9484 hpsa_get_max_perf_mode_cmds(h); 9485 /* Performant mode ring buffer and supporting data structures */ 9486 h->reply_queue_size = h->max_commands * sizeof(u64); 9487 9488 for (i = 0; i < h->nreply_queues; i++) { 9489 h->reply_queue[i].head = dma_alloc_coherent(&h->pdev->dev, 9490 h->reply_queue_size, 9491 &h->reply_queue[i].busaddr, 9492 GFP_KERNEL); 9493 if (!h->reply_queue[i].head) { 9494 rc = -ENOMEM; 9495 goto clean1; /* rq, ioaccel */ 9496 } 9497 h->reply_queue[i].size = h->max_commands; 9498 h->reply_queue[i].wraparound = 1; /* spec: init to 1 */ 9499 h->reply_queue[i].current_entry = 0; 9500 } 9501 9502 /* Need a block fetch table for performant mode */ 9503 h->blockFetchTable = kmalloc(((SG_ENTRIES_IN_CMD + 1) * 9504 sizeof(u32)), GFP_KERNEL); 9505 if (!h->blockFetchTable) { 9506 rc = -ENOMEM; 9507 goto clean1; /* rq, ioaccel */ 9508 } 9509 9510 rc = hpsa_enter_performant_mode(h, trans_support); 9511 if (rc) 9512 goto clean2; /* bft, rq, ioaccel */ 9513 return 0; 9514 9515clean2: /* bft, rq, ioaccel */ 9516 kfree(h->blockFetchTable); 9517 h->blockFetchTable = NULL; 9518clean1: /* rq, ioaccel */ 9519 hpsa_free_reply_queues(h); 9520 hpsa_free_ioaccel1_cmd_and_bft(h); 9521 hpsa_free_ioaccel2_cmd_and_bft(h); 9522 return rc; 9523} 9524 9525static int is_accelerated_cmd(struct CommandList *c) 9526{ 9527 return c->cmd_type == CMD_IOACCEL1 || c->cmd_type == CMD_IOACCEL2; 9528} 9529 9530static void hpsa_drain_accel_commands(struct ctlr_info *h) 9531{ 9532 struct CommandList *c = NULL; 9533 int i, accel_cmds_out; 9534 int refcount; 9535 9536 do { /* wait for all outstanding ioaccel commands to drain out */ 9537 accel_cmds_out = 0; 9538 for (i = 0; i < h->nr_cmds; i++) { 9539 c = h->cmd_pool + i; 9540 refcount = atomic_inc_return(&c->refcount); 9541 if (refcount > 1) /* Command is allocated */ 9542 accel_cmds_out += is_accelerated_cmd(c); 9543 cmd_free(h, c); 9544 } 9545 if (accel_cmds_out <= 0) 9546 break; 9547 msleep(100); 9548 } while (1); 9549} 9550 9551static struct hpsa_sas_phy *hpsa_alloc_sas_phy( 9552 struct hpsa_sas_port *hpsa_sas_port) 9553{ 9554 struct hpsa_sas_phy *hpsa_sas_phy; 9555 struct sas_phy *phy; 9556 9557 hpsa_sas_phy = kzalloc(sizeof(*hpsa_sas_phy), GFP_KERNEL); 9558 if (!hpsa_sas_phy) 9559 return NULL; 9560 9561 phy = sas_phy_alloc(hpsa_sas_port->parent_node->parent_dev, 9562 hpsa_sas_port->next_phy_index); 9563 if (!phy) { 9564 kfree(hpsa_sas_phy); 9565 return NULL; 9566 } 9567 9568 hpsa_sas_port->next_phy_index++; 9569 hpsa_sas_phy->phy = phy; 9570 hpsa_sas_phy->parent_port = hpsa_sas_port; 9571 9572 return hpsa_sas_phy; 9573} 9574 9575static void hpsa_free_sas_phy(struct hpsa_sas_phy *hpsa_sas_phy) 9576{ 9577 struct sas_phy *phy = hpsa_sas_phy->phy; 9578 9579 sas_port_delete_phy(hpsa_sas_phy->parent_port->port, phy); 9580 if (hpsa_sas_phy->added_to_port) 9581 list_del(&hpsa_sas_phy->phy_list_entry); 9582 sas_phy_delete(phy); 9583 kfree(hpsa_sas_phy); 9584} 9585 9586static int hpsa_sas_port_add_phy(struct hpsa_sas_phy *hpsa_sas_phy) 9587{ 9588 int rc; 9589 struct hpsa_sas_port *hpsa_sas_port; 9590 struct sas_phy *phy; 9591 struct sas_identify *identify; 9592 9593 hpsa_sas_port = hpsa_sas_phy->parent_port; 9594 phy = hpsa_sas_phy->phy; 9595 9596 identify = &phy->identify; 9597 memset(identify, 0, sizeof(*identify)); 9598 identify->sas_address = hpsa_sas_port->sas_address; 9599 identify->device_type = SAS_END_DEVICE; 9600 identify->initiator_port_protocols = SAS_PROTOCOL_STP; 9601 identify->target_port_protocols = SAS_PROTOCOL_STP; 9602 phy->minimum_linkrate_hw = SAS_LINK_RATE_UNKNOWN; 9603 phy->maximum_linkrate_hw = SAS_LINK_RATE_UNKNOWN; 9604 phy->minimum_linkrate = SAS_LINK_RATE_UNKNOWN; 9605 phy->maximum_linkrate = SAS_LINK_RATE_UNKNOWN; 9606 phy->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN; 9607 9608 rc = sas_phy_add(hpsa_sas_phy->phy); 9609 if (rc) 9610 return rc; 9611 9612 sas_port_add_phy(hpsa_sas_port->port, hpsa_sas_phy->phy); 9613 list_add_tail(&hpsa_sas_phy->phy_list_entry, 9614 &hpsa_sas_port->phy_list_head); 9615 hpsa_sas_phy->added_to_port = true; 9616 9617 return 0; 9618} 9619 9620static int 9621 hpsa_sas_port_add_rphy(struct hpsa_sas_port *hpsa_sas_port, 9622 struct sas_rphy *rphy) 9623{ 9624 struct sas_identify *identify; 9625 9626 identify = &rphy->identify; 9627 identify->sas_address = hpsa_sas_port->sas_address; 9628 identify->initiator_port_protocols = SAS_PROTOCOL_STP; 9629 identify->target_port_protocols = SAS_PROTOCOL_STP; 9630 9631 return sas_rphy_add(rphy); 9632} 9633 9634static struct hpsa_sas_port 9635 *hpsa_alloc_sas_port(struct hpsa_sas_node *hpsa_sas_node, 9636 u64 sas_address) 9637{ 9638 int rc; 9639 struct hpsa_sas_port *hpsa_sas_port; 9640 struct sas_port *port; 9641 9642 hpsa_sas_port = kzalloc(sizeof(*hpsa_sas_port), GFP_KERNEL); 9643 if (!hpsa_sas_port) 9644 return NULL; 9645 9646 INIT_LIST_HEAD(&hpsa_sas_port->phy_list_head); 9647 hpsa_sas_port->parent_node = hpsa_sas_node; 9648 9649 port = sas_port_alloc_num(hpsa_sas_node->parent_dev); 9650 if (!port) 9651 goto free_hpsa_port; 9652 9653 rc = sas_port_add(port); 9654 if (rc) 9655 goto free_sas_port; 9656 9657 hpsa_sas_port->port = port; 9658 hpsa_sas_port->sas_address = sas_address; 9659 list_add_tail(&hpsa_sas_port->port_list_entry, 9660 &hpsa_sas_node->port_list_head); 9661 9662 return hpsa_sas_port; 9663 9664free_sas_port: 9665 sas_port_free(port); 9666free_hpsa_port: 9667 kfree(hpsa_sas_port); 9668 9669 return NULL; 9670} 9671 9672static void hpsa_free_sas_port(struct hpsa_sas_port *hpsa_sas_port) 9673{ 9674 struct hpsa_sas_phy *hpsa_sas_phy; 9675 struct hpsa_sas_phy *next; 9676 9677 list_for_each_entry_safe(hpsa_sas_phy, next, 9678 &hpsa_sas_port->phy_list_head, phy_list_entry) 9679 hpsa_free_sas_phy(hpsa_sas_phy); 9680 9681 sas_port_delete(hpsa_sas_port->port); 9682 list_del(&hpsa_sas_port->port_list_entry); 9683 kfree(hpsa_sas_port); 9684} 9685 9686static struct hpsa_sas_node *hpsa_alloc_sas_node(struct device *parent_dev) 9687{ 9688 struct hpsa_sas_node *hpsa_sas_node; 9689 9690 hpsa_sas_node = kzalloc(sizeof(*hpsa_sas_node), GFP_KERNEL); 9691 if (hpsa_sas_node) { 9692 hpsa_sas_node->parent_dev = parent_dev; 9693 INIT_LIST_HEAD(&hpsa_sas_node->port_list_head); 9694 } 9695 9696 return hpsa_sas_node; 9697} 9698 9699static void hpsa_free_sas_node(struct hpsa_sas_node *hpsa_sas_node) 9700{ 9701 struct hpsa_sas_port *hpsa_sas_port; 9702 struct hpsa_sas_port *next; 9703 9704 if (!hpsa_sas_node) 9705 return; 9706 9707 list_for_each_entry_safe(hpsa_sas_port, next, 9708 &hpsa_sas_node->port_list_head, port_list_entry) 9709 hpsa_free_sas_port(hpsa_sas_port); 9710 9711 kfree(hpsa_sas_node); 9712} 9713 9714static struct hpsa_scsi_dev_t 9715 *hpsa_find_device_by_sas_rphy(struct ctlr_info *h, 9716 struct sas_rphy *rphy) 9717{ 9718 int i; 9719 struct hpsa_scsi_dev_t *device; 9720 9721 for (i = 0; i < h->ndevices; i++) { 9722 device = h->dev[i]; 9723 if (!device->sas_port) 9724 continue; 9725 if (device->sas_port->rphy == rphy) 9726 return device; 9727 } 9728 9729 return NULL; 9730} 9731 9732static int hpsa_add_sas_host(struct ctlr_info *h) 9733{ 9734 int rc; 9735 struct device *parent_dev; 9736 struct hpsa_sas_node *hpsa_sas_node; 9737 struct hpsa_sas_port *hpsa_sas_port; 9738 struct hpsa_sas_phy *hpsa_sas_phy; 9739 9740 parent_dev = &h->scsi_host->shost_dev; 9741 9742 hpsa_sas_node = hpsa_alloc_sas_node(parent_dev); 9743 if (!hpsa_sas_node) 9744 return -ENOMEM; 9745 9746 hpsa_sas_port = hpsa_alloc_sas_port(hpsa_sas_node, h->sas_address); 9747 if (!hpsa_sas_port) { 9748 rc = -ENODEV; 9749 goto free_sas_node; 9750 } 9751 9752 hpsa_sas_phy = hpsa_alloc_sas_phy(hpsa_sas_port); 9753 if (!hpsa_sas_phy) { 9754 rc = -ENODEV; 9755 goto free_sas_port; 9756 } 9757 9758 rc = hpsa_sas_port_add_phy(hpsa_sas_phy); 9759 if (rc) 9760 goto free_sas_phy; 9761 9762 h->sas_host = hpsa_sas_node; 9763 9764 return 0; 9765 9766free_sas_phy: 9767 sas_phy_free(hpsa_sas_phy->phy); 9768 kfree(hpsa_sas_phy); 9769free_sas_port: 9770 hpsa_free_sas_port(hpsa_sas_port); 9771free_sas_node: 9772 hpsa_free_sas_node(hpsa_sas_node); 9773 9774 return rc; 9775} 9776 9777static void hpsa_delete_sas_host(struct ctlr_info *h) 9778{ 9779 hpsa_free_sas_node(h->sas_host); 9780} 9781 9782static int hpsa_add_sas_device(struct hpsa_sas_node *hpsa_sas_node, 9783 struct hpsa_scsi_dev_t *device) 9784{ 9785 int rc; 9786 struct hpsa_sas_port *hpsa_sas_port; 9787 struct sas_rphy *rphy; 9788 9789 hpsa_sas_port = hpsa_alloc_sas_port(hpsa_sas_node, device->sas_address); 9790 if (!hpsa_sas_port) 9791 return -ENOMEM; 9792 9793 rphy = sas_end_device_alloc(hpsa_sas_port->port); 9794 if (!rphy) { 9795 rc = -ENODEV; 9796 goto free_sas_port; 9797 } 9798 9799 hpsa_sas_port->rphy = rphy; 9800 device->sas_port = hpsa_sas_port; 9801 9802 rc = hpsa_sas_port_add_rphy(hpsa_sas_port, rphy); 9803 if (rc) 9804 goto free_sas_rphy; 9805 9806 return 0; 9807 9808free_sas_rphy: 9809 sas_rphy_free(rphy); 9810free_sas_port: 9811 hpsa_free_sas_port(hpsa_sas_port); 9812 device->sas_port = NULL; 9813 9814 return rc; 9815} 9816 9817static void hpsa_remove_sas_device(struct hpsa_scsi_dev_t *device) 9818{ 9819 if (device->sas_port) { 9820 hpsa_free_sas_port(device->sas_port); 9821 device->sas_port = NULL; 9822 } 9823} 9824 9825static int 9826hpsa_sas_get_linkerrors(struct sas_phy *phy) 9827{ 9828 return 0; 9829} 9830 9831static int 9832hpsa_sas_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier) 9833{ 9834 struct Scsi_Host *shost = phy_to_shost(rphy); 9835 struct ctlr_info *h; 9836 struct hpsa_scsi_dev_t *sd; 9837 9838 if (!shost) 9839 return -ENXIO; 9840 9841 h = shost_to_hba(shost); 9842 9843 if (!h) 9844 return -ENXIO; 9845 9846 sd = hpsa_find_device_by_sas_rphy(h, rphy); 9847 if (!sd) 9848 return -ENXIO; 9849 9850 *identifier = sd->eli; 9851 9852 return 0; 9853} 9854 9855static int 9856hpsa_sas_get_bay_identifier(struct sas_rphy *rphy) 9857{ 9858 return -ENXIO; 9859} 9860 9861static int 9862hpsa_sas_phy_reset(struct sas_phy *phy, int hard_reset) 9863{ 9864 return 0; 9865} 9866 9867static int 9868hpsa_sas_phy_enable(struct sas_phy *phy, int enable) 9869{ 9870 return 0; 9871} 9872 9873static int 9874hpsa_sas_phy_setup(struct sas_phy *phy) 9875{ 9876 return 0; 9877} 9878 9879static void 9880hpsa_sas_phy_release(struct sas_phy *phy) 9881{ 9882} 9883 9884static int 9885hpsa_sas_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates) 9886{ 9887 return -EINVAL; 9888} 9889 9890static struct sas_function_template hpsa_sas_transport_functions = { 9891 .get_linkerrors = hpsa_sas_get_linkerrors, 9892 .get_enclosure_identifier = hpsa_sas_get_enclosure_identifier, 9893 .get_bay_identifier = hpsa_sas_get_bay_identifier, 9894 .phy_reset = hpsa_sas_phy_reset, 9895 .phy_enable = hpsa_sas_phy_enable, 9896 .phy_setup = hpsa_sas_phy_setup, 9897 .phy_release = hpsa_sas_phy_release, 9898 .set_phy_speed = hpsa_sas_phy_speed, 9899}; 9900 9901/* 9902 * This is it. Register the PCI driver information for the cards we control 9903 * the OS will call our registered routines when it finds one of our cards. 9904 */ 9905static int __init hpsa_init(void) 9906{ 9907 int rc; 9908 9909 hpsa_sas_transport_template = 9910 sas_attach_transport(&hpsa_sas_transport_functions); 9911 if (!hpsa_sas_transport_template) 9912 return -ENODEV; 9913 9914 rc = pci_register_driver(&hpsa_pci_driver); 9915 9916 if (rc) 9917 sas_release_transport(hpsa_sas_transport_template); 9918 9919 return rc; 9920} 9921 9922static void __exit hpsa_cleanup(void) 9923{ 9924 pci_unregister_driver(&hpsa_pci_driver); 9925 sas_release_transport(hpsa_sas_transport_template); 9926} 9927 9928static void __attribute__((unused)) verify_offsets(void) 9929{ 9930#define VERIFY_OFFSET(member, offset) \ 9931 BUILD_BUG_ON(offsetof(struct raid_map_data, member) != offset) 9932 9933 VERIFY_OFFSET(structure_size, 0); 9934 VERIFY_OFFSET(volume_blk_size, 4); 9935 VERIFY_OFFSET(volume_blk_cnt, 8); 9936 VERIFY_OFFSET(phys_blk_shift, 16); 9937 VERIFY_OFFSET(parity_rotation_shift, 17); 9938 VERIFY_OFFSET(strip_size, 18); 9939 VERIFY_OFFSET(disk_starting_blk, 20); 9940 VERIFY_OFFSET(disk_blk_cnt, 28); 9941 VERIFY_OFFSET(data_disks_per_row, 36); 9942 VERIFY_OFFSET(metadata_disks_per_row, 38); 9943 VERIFY_OFFSET(row_cnt, 40); 9944 VERIFY_OFFSET(layout_map_count, 42); 9945 VERIFY_OFFSET(flags, 44); 9946 VERIFY_OFFSET(dekindex, 46); 9947 /* VERIFY_OFFSET(reserved, 48 */ 9948 VERIFY_OFFSET(data, 64); 9949 9950#undef VERIFY_OFFSET 9951 9952#define VERIFY_OFFSET(member, offset) \ 9953 BUILD_BUG_ON(offsetof(struct io_accel2_cmd, member) != offset) 9954 9955 VERIFY_OFFSET(IU_type, 0); 9956 VERIFY_OFFSET(direction, 1); 9957 VERIFY_OFFSET(reply_queue, 2); 9958 /* VERIFY_OFFSET(reserved1, 3); */ 9959 VERIFY_OFFSET(scsi_nexus, 4); 9960 VERIFY_OFFSET(Tag, 8); 9961 VERIFY_OFFSET(cdb, 16); 9962 VERIFY_OFFSET(cciss_lun, 32); 9963 VERIFY_OFFSET(data_len, 40); 9964 VERIFY_OFFSET(cmd_priority_task_attr, 44); 9965 VERIFY_OFFSET(sg_count, 45); 9966 /* VERIFY_OFFSET(reserved3 */ 9967 VERIFY_OFFSET(err_ptr, 48); 9968 VERIFY_OFFSET(err_len, 56); 9969 /* VERIFY_OFFSET(reserved4 */ 9970 VERIFY_OFFSET(sg, 64); 9971 9972#undef VERIFY_OFFSET 9973 9974#define VERIFY_OFFSET(member, offset) \ 9975 BUILD_BUG_ON(offsetof(struct io_accel1_cmd, member) != offset) 9976 9977 VERIFY_OFFSET(dev_handle, 0x00); 9978 VERIFY_OFFSET(reserved1, 0x02); 9979 VERIFY_OFFSET(function, 0x03); 9980 VERIFY_OFFSET(reserved2, 0x04); 9981 VERIFY_OFFSET(err_info, 0x0C); 9982 VERIFY_OFFSET(reserved3, 0x10); 9983 VERIFY_OFFSET(err_info_len, 0x12); 9984 VERIFY_OFFSET(reserved4, 0x13); 9985 VERIFY_OFFSET(sgl_offset, 0x14); 9986 VERIFY_OFFSET(reserved5, 0x15); 9987 VERIFY_OFFSET(transfer_len, 0x1C); 9988 VERIFY_OFFSET(reserved6, 0x20); 9989 VERIFY_OFFSET(io_flags, 0x24); 9990 VERIFY_OFFSET(reserved7, 0x26); 9991 VERIFY_OFFSET(LUN, 0x34); 9992 VERIFY_OFFSET(control, 0x3C); 9993 VERIFY_OFFSET(CDB, 0x40); 9994 VERIFY_OFFSET(reserved8, 0x50); 9995 VERIFY_OFFSET(host_context_flags, 0x60); 9996 VERIFY_OFFSET(timeout_sec, 0x62); 9997 VERIFY_OFFSET(ReplyQueue, 0x64); 9998 VERIFY_OFFSET(reserved9, 0x65); 9999 VERIFY_OFFSET(tag, 0x68); 10000 VERIFY_OFFSET(host_addr, 0x70); 10001 VERIFY_OFFSET(CISS_LUN, 0x78); 10002 VERIFY_OFFSET(SG, 0x78 + 8); 10003#undef VERIFY_OFFSET 10004} 10005 10006module_init(hpsa_init); 10007module_exit(hpsa_cleanup); 10008