1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 2018 Russell King, Deep Blue Solutions Ltd.
4 *
5 * Partly derived from CP110 comphy driver by Antoine Tenart
6 * <antoine.tenart@bootlin.com>
7 */
8#include <linux/delay.h>
9#include <linux/iopoll.h>
10#include <linux/module.h>
11#include <linux/phy/phy.h>
12#include <linux/phy.h>
13#include <linux/platform_device.h>
14
15#define MAX_A38X_COMPHY	6
16#define MAX_A38X_PORTS	3
17
18#define COMPHY_CFG1		0x00
19#define  COMPHY_CFG1_GEN_TX(x)		((x) << 26)
20#define  COMPHY_CFG1_GEN_TX_MSK		COMPHY_CFG1_GEN_TX(15)
21#define  COMPHY_CFG1_GEN_RX(x)		((x) << 22)
22#define  COMPHY_CFG1_GEN_RX_MSK		COMPHY_CFG1_GEN_RX(15)
23#define  GEN_SGMII_1_25GBPS		6
24#define  GEN_SGMII_3_125GBPS		8
25
26#define COMPHY_STAT1		0x18
27#define  COMPHY_STAT1_PLL_RDY_TX	BIT(3)
28#define  COMPHY_STAT1_PLL_RDY_RX	BIT(2)
29
30#define COMPHY_SELECTOR		0xfc
31
32struct a38x_comphy;
33
34struct a38x_comphy_lane {
35	void __iomem *base;
36	struct a38x_comphy *priv;
37	unsigned int n;
38
39	int port;
40};
41
42struct a38x_comphy {
43	void __iomem *base;
44	void __iomem *conf;
45	struct device *dev;
46	struct a38x_comphy_lane lane[MAX_A38X_COMPHY];
47};
48
49static const u8 gbe_mux[MAX_A38X_COMPHY][MAX_A38X_PORTS] = {
50	{ 0, 0, 0 },
51	{ 4, 5, 0 },
52	{ 0, 4, 0 },
53	{ 0, 0, 4 },
54	{ 0, 3, 0 },
55	{ 0, 0, 3 },
56};
57
58static void a38x_set_conf(struct a38x_comphy_lane *lane, bool enable)
59{
60	struct a38x_comphy *priv = lane->priv;
61	u32 conf;
62
63	if (priv->conf) {
64		conf = readl_relaxed(priv->conf);
65		if (enable)
66			conf |= BIT(lane->port);
67		else
68			conf &= ~BIT(lane->port);
69		writel(conf, priv->conf);
70	}
71}
72
73static void a38x_comphy_set_reg(struct a38x_comphy_lane *lane,
74				unsigned int offset, u32 mask, u32 value)
75{
76	u32 val;
77
78	val = readl_relaxed(lane->base + offset) & ~mask;
79	writel(val | value, lane->base + offset);
80}
81
82static void a38x_comphy_set_speed(struct a38x_comphy_lane *lane,
83				  unsigned int gen_tx, unsigned int gen_rx)
84{
85	a38x_comphy_set_reg(lane, COMPHY_CFG1,
86			    COMPHY_CFG1_GEN_TX_MSK | COMPHY_CFG1_GEN_RX_MSK,
87			    COMPHY_CFG1_GEN_TX(gen_tx) |
88		            COMPHY_CFG1_GEN_RX(gen_rx));
89}
90
91static int a38x_comphy_poll(struct a38x_comphy_lane *lane,
92			    unsigned int offset, u32 mask, u32 value)
93{
94	u32 val;
95	int ret;
96
97	ret = readl_relaxed_poll_timeout_atomic(lane->base + offset, val,
98						(val & mask) == value,
99						1000, 150000);
100
101	if (ret)
102		dev_err(lane->priv->dev,
103			"comphy%u: timed out waiting for status\n", lane->n);
104
105	return ret;
106}
107
108/*
109 * We only support changing the speed for comphys configured for GBE.
110 * Since that is all we do, we only poll for PLL ready status.
111 */
112static int a38x_comphy_set_mode(struct phy *phy, enum phy_mode mode, int sub)
113{
114	struct a38x_comphy_lane *lane = phy_get_drvdata(phy);
115	unsigned int gen;
116	int ret;
117
118	if (mode != PHY_MODE_ETHERNET)
119		return -EINVAL;
120
121	switch (sub) {
122	case PHY_INTERFACE_MODE_SGMII:
123	case PHY_INTERFACE_MODE_1000BASEX:
124		gen = GEN_SGMII_1_25GBPS;
125		break;
126
127	case PHY_INTERFACE_MODE_2500BASEX:
128		gen = GEN_SGMII_3_125GBPS;
129		break;
130
131	default:
132		return -EINVAL;
133	}
134
135	a38x_set_conf(lane, false);
136
137	a38x_comphy_set_speed(lane, gen, gen);
138
139	ret = a38x_comphy_poll(lane, COMPHY_STAT1,
140			       COMPHY_STAT1_PLL_RDY_TX |
141			       COMPHY_STAT1_PLL_RDY_RX,
142			       COMPHY_STAT1_PLL_RDY_TX |
143			       COMPHY_STAT1_PLL_RDY_RX);
144
145	if (ret == 0)
146		a38x_set_conf(lane, true);
147
148	return ret;
149}
150
151static const struct phy_ops a38x_comphy_ops = {
152	.set_mode	= a38x_comphy_set_mode,
153	.owner		= THIS_MODULE,
154};
155
156static struct phy *a38x_comphy_xlate(struct device *dev,
157				     struct of_phandle_args *args)
158{
159	struct a38x_comphy_lane *lane;
160	struct phy *phy;
161	u32 val;
162
163	if (WARN_ON(args->args[0] >= MAX_A38X_PORTS))
164		return ERR_PTR(-EINVAL);
165
166	phy = of_phy_simple_xlate(dev, args);
167	if (IS_ERR(phy))
168		return phy;
169
170	lane = phy_get_drvdata(phy);
171	if (lane->port >= 0)
172		return ERR_PTR(-EBUSY);
173
174	lane->port = args->args[0];
175
176	val = readl_relaxed(lane->priv->base + COMPHY_SELECTOR);
177	val = (val >> (4 * lane->n)) & 0xf;
178
179	if (!gbe_mux[lane->n][lane->port] ||
180	    val != gbe_mux[lane->n][lane->port]) {
181		dev_warn(lane->priv->dev,
182			 "comphy%u: not configured for GBE\n", lane->n);
183		phy = ERR_PTR(-EINVAL);
184	}
185
186	return phy;
187}
188
189static int a38x_comphy_probe(struct platform_device *pdev)
190{
191	struct phy_provider *provider;
192	struct device_node *child;
193	struct a38x_comphy *priv;
194	struct resource *res;
195	void __iomem *base;
196
197	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
198	if (!priv)
199		return -ENOMEM;
200
201	base = devm_platform_ioremap_resource(pdev, 0);
202	if (IS_ERR(base))
203		return PTR_ERR(base);
204
205	priv->dev = &pdev->dev;
206	priv->base = base;
207
208	/* Optional */
209	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "conf");
210	if (res) {
211		priv->conf = devm_ioremap_resource(&pdev->dev, res);
212		if (IS_ERR(priv->conf))
213			return PTR_ERR(priv->conf);
214	}
215
216	for_each_available_child_of_node(pdev->dev.of_node, child) {
217		struct phy *phy;
218		int ret;
219		u32 val;
220
221		ret = of_property_read_u32(child, "reg", &val);
222		if (ret < 0) {
223			dev_err(&pdev->dev, "missing 'reg' property (%d)\n",
224				ret);
225			continue;
226		}
227
228		if (val >= MAX_A38X_COMPHY || priv->lane[val].base) {
229			dev_err(&pdev->dev, "invalid 'reg' property\n");
230			continue;
231		}
232
233		phy = devm_phy_create(&pdev->dev, child, &a38x_comphy_ops);
234		if (IS_ERR(phy)) {
235			of_node_put(child);
236			return PTR_ERR(phy);
237		}
238
239		priv->lane[val].base = base + 0x28 * val;
240		priv->lane[val].priv = priv;
241		priv->lane[val].n = val;
242		priv->lane[val].port = -1;
243		phy_set_drvdata(phy, &priv->lane[val]);
244	}
245
246	dev_set_drvdata(&pdev->dev, priv);
247
248	provider = devm_of_phy_provider_register(&pdev->dev, a38x_comphy_xlate);
249
250	return PTR_ERR_OR_ZERO(provider);
251}
252
253static const struct of_device_id a38x_comphy_of_match_table[] = {
254	{ .compatible = "marvell,armada-380-comphy" },
255	{ },
256};
257MODULE_DEVICE_TABLE(of, a38x_comphy_of_match_table);
258
259static struct platform_driver a38x_comphy_driver = {
260	.probe	= a38x_comphy_probe,
261	.driver	= {
262		.name = "armada-38x-comphy",
263		.of_match_table = a38x_comphy_of_match_table,
264	},
265};
266module_platform_driver(a38x_comphy_driver);
267
268MODULE_AUTHOR("Russell King <rmk+kernel@armlinux.org.uk>");
269MODULE_DESCRIPTION("Common PHY driver for Armada 38x SoCs");
270MODULE_LICENSE("GPL v2");
271