1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * phy-brcm-usb-init.c - Broadcom USB Phy chip specific init functions 4 * 5 * Copyright (C) 2014-2017 Broadcom 6 */ 7 8/* 9 * This module contains USB PHY initialization for power up and S3 resume 10 */ 11 12#include <linux/delay.h> 13#include <linux/io.h> 14 15#include <linux/soc/brcmstb/brcmstb.h> 16#include "phy-brcm-usb-init.h" 17 18#define PHY_PORTS 2 19#define PHY_PORT_SELECT_0 0 20#define PHY_PORT_SELECT_1 0x1000 21 22/* Register definitions for the USB CTRL block */ 23#define USB_CTRL_SETUP 0x00 24#define USB_CTRL_SETUP_IOC_MASK 0x00000010 25#define USB_CTRL_SETUP_IPP_MASK 0x00000020 26#define USB_CTRL_SETUP_BABO_MASK 0x00000001 27#define USB_CTRL_SETUP_FNHW_MASK 0x00000002 28#define USB_CTRL_SETUP_FNBO_MASK 0x00000004 29#define USB_CTRL_SETUP_WABO_MASK 0x00000008 30#define USB_CTRL_SETUP_SCB_CLIENT_SWAP_MASK 0x00002000 /* option */ 31#define USB_CTRL_SETUP_SCB1_EN_MASK 0x00004000 /* option */ 32#define USB_CTRL_SETUP_SCB2_EN_MASK 0x00008000 /* option */ 33#define USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK 0X00020000 /* option */ 34#define USB_CTRL_SETUP_SS_EHCI64BIT_EN_VAR_MASK 0x00010000 /* option */ 35#define USB_CTRL_SETUP_STRAP_IPP_SEL_MASK 0x02000000 /* option */ 36#define USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK 0x04000000 /* option */ 37#define USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK 0x08000000 /* opt */ 38#define USB_CTRL_SETUP_OC3_DISABLE_MASK 0xc0000000 /* option */ 39#define USB_CTRL_PLL_CTL 0x04 40#define USB_CTRL_PLL_CTL_PLL_SUSPEND_EN_MASK 0x08000000 41#define USB_CTRL_PLL_CTL_PLL_RESETB_MASK 0x40000000 42#define USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK 0x80000000 /* option */ 43#define USB_CTRL_EBRIDGE 0x0c 44#define USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK 0x00020000 /* option */ 45#define USB_CTRL_EBRIDGE_EBR_SCB_SIZE_MASK 0x00000f80 /* option */ 46#define USB_CTRL_OBRIDGE 0x10 47#define USB_CTRL_OBRIDGE_LS_KEEP_ALIVE_MASK 0x08000000 48#define USB_CTRL_MDIO 0x14 49#define USB_CTRL_MDIO2 0x18 50#define USB_CTRL_UTMI_CTL_1 0x2c 51#define USB_CTRL_UTMI_CTL_1_POWER_UP_FSM_EN_MASK 0x00000800 52#define USB_CTRL_UTMI_CTL_1_POWER_UP_FSM_EN_P1_MASK 0x08000000 53#define USB_CTRL_USB_PM 0x34 54#define USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK 0x00800000 /* option */ 55#define USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK 0x00400000 /* option */ 56#define USB_CTRL_USB_PM_XHC_SOFT_RESETB_VAR_MASK 0x40000000 /* option */ 57#define USB_CTRL_USB_PM_USB_PWRDN_MASK 0x80000000 /* option */ 58#define USB_CTRL_USB_PM_SOFT_RESET_MASK 0x40000000 /* option */ 59#define USB_CTRL_USB_PM_USB20_HC_RESETB_MASK 0x30000000 /* option */ 60#define USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK 0x00300000 /* option */ 61#define USB_CTRL_USB_PM_RMTWKUP_EN_MASK 0x00000001 62#define USB_CTRL_USB_PM_STATUS 0x38 63#define USB_CTRL_USB30_CTL1 0x60 64#define USB_CTRL_USB30_CTL1_PHY3_PLL_SEQ_START_MASK 0x00000010 65#define USB_CTRL_USB30_CTL1_PHY3_RESETB_MASK 0x00010000 66#define USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK 0x00020000 /* option */ 67#define USB_CTRL_USB30_CTL1_USB3_IOC_MASK 0x10000000 /* option */ 68#define USB_CTRL_USB30_CTL1_USB3_IPP_MASK 0x20000000 /* option */ 69#define USB_CTRL_USB30_PCTL 0x70 70#define USB_CTRL_USB30_PCTL_PHY3_SOFT_RESETB_MASK 0x00000002 71#define USB_CTRL_USB30_PCTL_PHY3_IDDQ_OVERRIDE_MASK 0x00008000 72#define USB_CTRL_USB30_PCTL_PHY3_SOFT_RESETB_P1_MASK 0x00020000 73#define USB_CTRL_USB_DEVICE_CTL1 0x90 74#define USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK 0x00000003 /* option */ 75 76/* Register definitions for the XHCI EC block */ 77#define USB_XHCI_EC_IRAADR 0x658 78#define USB_XHCI_EC_IRADAT 0x65c 79 80enum brcm_family_type { 81 BRCM_FAMILY_3390A0, 82 BRCM_FAMILY_7250B0, 83 BRCM_FAMILY_7271A0, 84 BRCM_FAMILY_7364A0, 85 BRCM_FAMILY_7366C0, 86 BRCM_FAMILY_74371A0, 87 BRCM_FAMILY_7439B0, 88 BRCM_FAMILY_7445D0, 89 BRCM_FAMILY_7260A0, 90 BRCM_FAMILY_7278A0, 91 BRCM_FAMILY_COUNT, 92}; 93 94#define USB_BRCM_FAMILY(chip) \ 95 [BRCM_FAMILY_##chip] = __stringify(chip) 96 97static const char *family_names[BRCM_FAMILY_COUNT] = { 98 USB_BRCM_FAMILY(3390A0), 99 USB_BRCM_FAMILY(7250B0), 100 USB_BRCM_FAMILY(7271A0), 101 USB_BRCM_FAMILY(7364A0), 102 USB_BRCM_FAMILY(7366C0), 103 USB_BRCM_FAMILY(74371A0), 104 USB_BRCM_FAMILY(7439B0), 105 USB_BRCM_FAMILY(7445D0), 106 USB_BRCM_FAMILY(7260A0), 107 USB_BRCM_FAMILY(7278A0), 108}; 109 110enum { 111 USB_CTRL_SETUP_SCB1_EN_SELECTOR, 112 USB_CTRL_SETUP_SCB2_EN_SELECTOR, 113 USB_CTRL_SETUP_SS_EHCI64BIT_EN_SELECTOR, 114 USB_CTRL_SETUP_STRAP_IPP_SEL_SELECTOR, 115 USB_CTRL_SETUP_OC3_DISABLE_SELECTOR, 116 USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_SELECTOR, 117 USB_CTRL_USB_PM_BDC_SOFT_RESETB_SELECTOR, 118 USB_CTRL_USB_PM_XHC_SOFT_RESETB_SELECTOR, 119 USB_CTRL_USB_PM_USB_PWRDN_SELECTOR, 120 USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_SELECTOR, 121 USB_CTRL_USB30_CTL1_USB3_IOC_SELECTOR, 122 USB_CTRL_USB30_CTL1_USB3_IPP_SELECTOR, 123 USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_SELECTOR, 124 USB_CTRL_USB_PM_SOFT_RESET_SELECTOR, 125 USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_SELECTOR, 126 USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_SELECTOR, 127 USB_CTRL_USB_PM_USB20_HC_RESETB_SELECTOR, 128 USB_CTRL_SETUP_ENDIAN_SELECTOR, 129 USB_CTRL_SELECTOR_COUNT, 130}; 131 132#define USB_CTRL_MASK_FAMILY(params, reg, field) \ 133 (params->usb_reg_bits_map[USB_CTRL_##reg##_##field##_SELECTOR]) 134 135#define USB_CTRL_SET_FAMILY(params, reg, field) \ 136 usb_ctrl_set_family(params, USB_CTRL_##reg, \ 137 USB_CTRL_##reg##_##field##_SELECTOR) 138#define USB_CTRL_UNSET_FAMILY(params, reg, field) \ 139 usb_ctrl_unset_family(params, USB_CTRL_##reg, \ 140 USB_CTRL_##reg##_##field##_SELECTOR) 141 142#define MDIO_USB2 0 143#define MDIO_USB3 BIT(31) 144 145#define USB_CTRL_SETUP_ENDIAN_BITS ( \ 146 USB_CTRL_MASK(SETUP, BABO) | \ 147 USB_CTRL_MASK(SETUP, FNHW) | \ 148 USB_CTRL_MASK(SETUP, FNBO) | \ 149 USB_CTRL_MASK(SETUP, WABO)) 150 151#ifdef __LITTLE_ENDIAN 152#define ENDIAN_SETTINGS ( \ 153 USB_CTRL_MASK(SETUP, BABO) | \ 154 USB_CTRL_MASK(SETUP, FNHW)) 155#else 156#define ENDIAN_SETTINGS ( \ 157 USB_CTRL_MASK(SETUP, FNHW) | \ 158 USB_CTRL_MASK(SETUP, FNBO) | \ 159 USB_CTRL_MASK(SETUP, WABO)) 160#endif 161 162struct id_to_type { 163 u32 id; 164 int type; 165}; 166 167static const struct id_to_type id_to_type_table[] = { 168 { 0x33900000, BRCM_FAMILY_3390A0 }, 169 { 0x72500010, BRCM_FAMILY_7250B0 }, 170 { 0x72600000, BRCM_FAMILY_7260A0 }, 171 { 0x72550000, BRCM_FAMILY_7260A0 }, 172 { 0x72680000, BRCM_FAMILY_7271A0 }, 173 { 0x72710000, BRCM_FAMILY_7271A0 }, 174 { 0x73640000, BRCM_FAMILY_7364A0 }, 175 { 0x73660020, BRCM_FAMILY_7366C0 }, 176 { 0x07437100, BRCM_FAMILY_74371A0 }, 177 { 0x74390010, BRCM_FAMILY_7439B0 }, 178 { 0x74450030, BRCM_FAMILY_7445D0 }, 179 { 0x72780000, BRCM_FAMILY_7278A0 }, 180 { 0, BRCM_FAMILY_7271A0 }, /* default */ 181}; 182 183static const u32 184usb_reg_bits_map_table[BRCM_FAMILY_COUNT][USB_CTRL_SELECTOR_COUNT] = { 185 /* 3390B0 */ 186 [BRCM_FAMILY_3390A0] = { 187 USB_CTRL_SETUP_SCB1_EN_MASK, 188 USB_CTRL_SETUP_SCB2_EN_MASK, 189 USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK, 190 USB_CTRL_SETUP_STRAP_IPP_SEL_MASK, 191 USB_CTRL_SETUP_OC3_DISABLE_MASK, 192 0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */ 193 0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */ 194 USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK, 195 USB_CTRL_USB_PM_USB_PWRDN_MASK, 196 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */ 197 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */ 198 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */ 199 USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK, 200 0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */ 201 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */ 202 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */ 203 USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK, 204 ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */ 205 }, 206 /* 7250b0 */ 207 [BRCM_FAMILY_7250B0] = { 208 USB_CTRL_SETUP_SCB1_EN_MASK, 209 USB_CTRL_SETUP_SCB2_EN_MASK, 210 USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK, 211 0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */ 212 USB_CTRL_SETUP_OC3_DISABLE_MASK, 213 USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK, 214 0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */ 215 USB_CTRL_USB_PM_XHC_SOFT_RESETB_VAR_MASK, 216 0, /* USB_CTRL_USB_PM_USB_PWRDN_MASK */ 217 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */ 218 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */ 219 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */ 220 0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */ 221 0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */ 222 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */ 223 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */ 224 USB_CTRL_USB_PM_USB20_HC_RESETB_MASK, 225 ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */ 226 }, 227 /* 7271a0 */ 228 [BRCM_FAMILY_7271A0] = { 229 0, /* USB_CTRL_SETUP_SCB1_EN_MASK */ 230 0, /* USB_CTRL_SETUP_SCB2_EN_MASK */ 231 USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK, 232 USB_CTRL_SETUP_STRAP_IPP_SEL_MASK, 233 USB_CTRL_SETUP_OC3_DISABLE_MASK, 234 0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */ 235 USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK, 236 USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK, 237 USB_CTRL_USB_PM_USB_PWRDN_MASK, 238 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */ 239 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */ 240 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */ 241 USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK, 242 USB_CTRL_USB_PM_SOFT_RESET_MASK, 243 USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK, 244 USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK, 245 USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK, 246 ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */ 247 }, 248 /* 7364a0 */ 249 [BRCM_FAMILY_7364A0] = { 250 USB_CTRL_SETUP_SCB1_EN_MASK, 251 USB_CTRL_SETUP_SCB2_EN_MASK, 252 USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK, 253 0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */ 254 USB_CTRL_SETUP_OC3_DISABLE_MASK, 255 USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK, 256 0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */ 257 USB_CTRL_USB_PM_XHC_SOFT_RESETB_VAR_MASK, 258 0, /* USB_CTRL_USB_PM_USB_PWRDN_MASK */ 259 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */ 260 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */ 261 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */ 262 0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */ 263 0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */ 264 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */ 265 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */ 266 USB_CTRL_USB_PM_USB20_HC_RESETB_MASK, 267 ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */ 268 }, 269 /* 7366c0 */ 270 [BRCM_FAMILY_7366C0] = { 271 USB_CTRL_SETUP_SCB1_EN_MASK, 272 USB_CTRL_SETUP_SCB2_EN_MASK, 273 USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK, 274 0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */ 275 USB_CTRL_SETUP_OC3_DISABLE_MASK, 276 0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */ 277 0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */ 278 USB_CTRL_USB_PM_XHC_SOFT_RESETB_VAR_MASK, 279 USB_CTRL_USB_PM_USB_PWRDN_MASK, 280 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */ 281 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */ 282 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */ 283 0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */ 284 0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */ 285 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */ 286 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */ 287 USB_CTRL_USB_PM_USB20_HC_RESETB_MASK, 288 ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */ 289 }, 290 /* 74371A0 */ 291 [BRCM_FAMILY_74371A0] = { 292 USB_CTRL_SETUP_SCB1_EN_MASK, 293 USB_CTRL_SETUP_SCB2_EN_MASK, 294 USB_CTRL_SETUP_SS_EHCI64BIT_EN_VAR_MASK, 295 0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */ 296 0, /* USB_CTRL_SETUP_OC3_DISABLE_MASK */ 297 USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK, 298 0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */ 299 0, /* USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK */ 300 0, /* USB_CTRL_USB_PM_USB_PWRDN_MASK */ 301 USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK, 302 USB_CTRL_USB30_CTL1_USB3_IOC_MASK, 303 USB_CTRL_USB30_CTL1_USB3_IPP_MASK, 304 0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */ 305 0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */ 306 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */ 307 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */ 308 0, /* USB_CTRL_USB_PM_USB20_HC_RESETB_MASK */ 309 ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */ 310 }, 311 /* 7439B0 */ 312 [BRCM_FAMILY_7439B0] = { 313 USB_CTRL_SETUP_SCB1_EN_MASK, 314 USB_CTRL_SETUP_SCB2_EN_MASK, 315 USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK, 316 USB_CTRL_SETUP_STRAP_IPP_SEL_MASK, 317 USB_CTRL_SETUP_OC3_DISABLE_MASK, 318 0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */ 319 USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK, 320 USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK, 321 USB_CTRL_USB_PM_USB_PWRDN_MASK, 322 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */ 323 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */ 324 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */ 325 USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK, 326 0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */ 327 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */ 328 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */ 329 USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK, 330 ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */ 331 }, 332 /* 7445d0 */ 333 [BRCM_FAMILY_7445D0] = { 334 USB_CTRL_SETUP_SCB1_EN_MASK, 335 USB_CTRL_SETUP_SCB2_EN_MASK, 336 USB_CTRL_SETUP_SS_EHCI64BIT_EN_VAR_MASK, 337 0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */ 338 USB_CTRL_SETUP_OC3_DISABLE_MASK, 339 USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK, 340 0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */ 341 0, /* USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK */ 342 0, /* USB_CTRL_USB_PM_USB_PWRDN_MASK */ 343 USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK, 344 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */ 345 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */ 346 0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */ 347 0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */ 348 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */ 349 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */ 350 USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK, 351 ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */ 352 }, 353 /* 7260a0 */ 354 [BRCM_FAMILY_7260A0] = { 355 0, /* USB_CTRL_SETUP_SCB1_EN_MASK */ 356 0, /* USB_CTRL_SETUP_SCB2_EN_MASK */ 357 USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK, 358 USB_CTRL_SETUP_STRAP_IPP_SEL_MASK, 359 USB_CTRL_SETUP_OC3_DISABLE_MASK, 360 0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */ 361 USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK, 362 USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK, 363 USB_CTRL_USB_PM_USB_PWRDN_MASK, 364 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */ 365 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */ 366 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */ 367 USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK, 368 USB_CTRL_USB_PM_SOFT_RESET_MASK, 369 USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK, 370 USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK, 371 USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK, 372 ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */ 373 }, 374 /* 7278a0 */ 375 [BRCM_FAMILY_7278A0] = { 376 0, /* USB_CTRL_SETUP_SCB1_EN_MASK */ 377 0, /* USB_CTRL_SETUP_SCB2_EN_MASK */ 378 0, /*USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK */ 379 USB_CTRL_SETUP_STRAP_IPP_SEL_MASK, 380 USB_CTRL_SETUP_OC3_DISABLE_MASK, 381 0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */ 382 USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK, 383 USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK, 384 USB_CTRL_USB_PM_USB_PWRDN_MASK, 385 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */ 386 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */ 387 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */ 388 USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK, 389 USB_CTRL_USB_PM_SOFT_RESET_MASK, 390 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */ 391 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */ 392 0, /* USB_CTRL_USB_PM_USB20_HC_RESETB_MASK */ 393 0, /* USB_CTRL_SETUP ENDIAN bits */ 394 }, 395}; 396 397static inline 398void usb_ctrl_unset_family(struct brcm_usb_init_params *params, 399 u32 reg_offset, u32 field) 400{ 401 u32 mask; 402 403 mask = params->usb_reg_bits_map[field]; 404 brcm_usb_ctrl_unset(params->regs[BRCM_REGS_CTRL] + reg_offset, mask); 405}; 406 407static inline 408void usb_ctrl_set_family(struct brcm_usb_init_params *params, 409 u32 reg_offset, u32 field) 410{ 411 u32 mask; 412 413 mask = params->usb_reg_bits_map[field]; 414 brcm_usb_ctrl_set(params->regs[BRCM_REGS_CTRL] + reg_offset, mask); 415}; 416 417static u32 brcmusb_usb_mdio_read(void __iomem *ctrl_base, u32 reg, int mode) 418{ 419 u32 data; 420 421 data = (reg << 16) | mode; 422 brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); 423 data |= (1 << 24); 424 brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); 425 data &= ~(1 << 24); 426 /* wait for the 60MHz parallel to serial shifter */ 427 usleep_range(10, 20); 428 brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); 429 /* wait for the 60MHz parallel to serial shifter */ 430 usleep_range(10, 20); 431 432 return brcm_usb_readl(USB_CTRL_REG(ctrl_base, MDIO2)) & 0xffff; 433} 434 435static void brcmusb_usb_mdio_write(void __iomem *ctrl_base, u32 reg, 436 u32 val, int mode) 437{ 438 u32 data; 439 440 data = (reg << 16) | val | mode; 441 brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); 442 data |= (1 << 25); 443 brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); 444 data &= ~(1 << 25); 445 446 /* wait for the 60MHz parallel to serial shifter */ 447 usleep_range(10, 20); 448 brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); 449 /* wait for the 60MHz parallel to serial shifter */ 450 usleep_range(10, 20); 451} 452 453static void brcmusb_usb_phy_ldo_fix(void __iomem *ctrl_base) 454{ 455 /* first disable FSM but also leave it that way */ 456 /* to allow normal suspend/resume */ 457 USB_CTRL_UNSET(ctrl_base, UTMI_CTL_1, POWER_UP_FSM_EN); 458 USB_CTRL_UNSET(ctrl_base, UTMI_CTL_1, POWER_UP_FSM_EN_P1); 459 460 /* reset USB 2.0 PLL */ 461 USB_CTRL_UNSET(ctrl_base, PLL_CTL, PLL_RESETB); 462 /* PLL reset period */ 463 udelay(1); 464 USB_CTRL_SET(ctrl_base, PLL_CTL, PLL_RESETB); 465 /* Give PLL enough time to lock */ 466 usleep_range(1000, 2000); 467} 468 469static void brcmusb_usb2_eye_fix(void __iomem *ctrl_base) 470{ 471 /* Increase USB 2.0 TX level to meet spec requirement */ 472 brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x80a0, MDIO_USB2); 473 brcmusb_usb_mdio_write(ctrl_base, 0x0a, 0xc6a0, MDIO_USB2); 474} 475 476static void brcmusb_usb3_pll_fix(void __iomem *ctrl_base) 477{ 478 /* Set correct window for PLL lock detect */ 479 brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x8000, MDIO_USB3); 480 brcmusb_usb_mdio_write(ctrl_base, 0x07, 0x1503, MDIO_USB3); 481} 482 483static void brcmusb_usb3_enable_pipe_reset(void __iomem *ctrl_base) 484{ 485 u32 val; 486 487 /* Re-enable USB 3.0 pipe reset */ 488 brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x8000, MDIO_USB3); 489 val = brcmusb_usb_mdio_read(ctrl_base, 0x0f, MDIO_USB3) | 0x200; 490 brcmusb_usb_mdio_write(ctrl_base, 0x0f, val, MDIO_USB3); 491} 492 493static void brcmusb_usb3_enable_sigdet(void __iomem *ctrl_base) 494{ 495 u32 val, ofs; 496 int ii; 497 498 ofs = 0; 499 for (ii = 0; ii < PHY_PORTS; ++ii) { 500 /* Set correct default for sigdet */ 501 brcmusb_usb_mdio_write(ctrl_base, 0x1f, (0x8080 + ofs), 502 MDIO_USB3); 503 val = brcmusb_usb_mdio_read(ctrl_base, 0x05, MDIO_USB3); 504 val = (val & ~0x800f) | 0x800d; 505 brcmusb_usb_mdio_write(ctrl_base, 0x05, val, MDIO_USB3); 506 ofs = PHY_PORT_SELECT_1; 507 } 508} 509 510static void brcmusb_usb3_enable_skip_align(void __iomem *ctrl_base) 511{ 512 u32 val, ofs; 513 int ii; 514 515 ofs = 0; 516 for (ii = 0; ii < PHY_PORTS; ++ii) { 517 /* Set correct default for SKIP align */ 518 brcmusb_usb_mdio_write(ctrl_base, 0x1f, (0x8060 + ofs), 519 MDIO_USB3); 520 val = brcmusb_usb_mdio_read(ctrl_base, 0x01, MDIO_USB3) | 0x200; 521 brcmusb_usb_mdio_write(ctrl_base, 0x01, val, MDIO_USB3); 522 ofs = PHY_PORT_SELECT_1; 523 } 524} 525 526static void brcmusb_usb3_unfreeze_aeq(void __iomem *ctrl_base) 527{ 528 u32 val, ofs; 529 int ii; 530 531 ofs = 0; 532 for (ii = 0; ii < PHY_PORTS; ++ii) { 533 /* Let EQ freeze after TSEQ */ 534 brcmusb_usb_mdio_write(ctrl_base, 0x1f, (0x80e0 + ofs), 535 MDIO_USB3); 536 val = brcmusb_usb_mdio_read(ctrl_base, 0x01, MDIO_USB3); 537 val &= ~0x0008; 538 brcmusb_usb_mdio_write(ctrl_base, 0x01, val, MDIO_USB3); 539 ofs = PHY_PORT_SELECT_1; 540 } 541} 542 543static void brcmusb_usb3_pll_54mhz(struct brcm_usb_init_params *params) 544{ 545 u32 ofs; 546 int ii; 547 void __iomem *ctrl_base = params->regs[BRCM_REGS_CTRL]; 548 549 /* 550 * On newer B53 based SoC's, the reference clock for the 551 * 3.0 PLL has been changed from 50MHz to 54MHz so the 552 * PLL needs to be reprogrammed. 553 * See SWLINUX-4006. 554 * 555 * On the 7364C0, the reference clock for the 556 * 3.0 PLL has been changed from 50MHz to 54MHz to 557 * work around a MOCA issue. 558 * See SWLINUX-4169. 559 */ 560 switch (params->selected_family) { 561 case BRCM_FAMILY_3390A0: 562 case BRCM_FAMILY_7250B0: 563 case BRCM_FAMILY_7366C0: 564 case BRCM_FAMILY_74371A0: 565 case BRCM_FAMILY_7439B0: 566 case BRCM_FAMILY_7445D0: 567 case BRCM_FAMILY_7260A0: 568 return; 569 case BRCM_FAMILY_7364A0: 570 if (BRCM_REV(params->family_id) < 0x20) 571 return; 572 break; 573 } 574 575 /* set USB 3.0 PLL to accept 54Mhz reference clock */ 576 USB_CTRL_UNSET(ctrl_base, USB30_CTL1, PHY3_PLL_SEQ_START); 577 578 brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x8000, MDIO_USB3); 579 brcmusb_usb_mdio_write(ctrl_base, 0x10, 0x5784, MDIO_USB3); 580 brcmusb_usb_mdio_write(ctrl_base, 0x11, 0x01d0, MDIO_USB3); 581 brcmusb_usb_mdio_write(ctrl_base, 0x12, 0x1DE8, MDIO_USB3); 582 brcmusb_usb_mdio_write(ctrl_base, 0x13, 0xAA80, MDIO_USB3); 583 brcmusb_usb_mdio_write(ctrl_base, 0x14, 0x8826, MDIO_USB3); 584 brcmusb_usb_mdio_write(ctrl_base, 0x15, 0x0044, MDIO_USB3); 585 brcmusb_usb_mdio_write(ctrl_base, 0x16, 0x8000, MDIO_USB3); 586 brcmusb_usb_mdio_write(ctrl_base, 0x17, 0x0851, MDIO_USB3); 587 brcmusb_usb_mdio_write(ctrl_base, 0x18, 0x0000, MDIO_USB3); 588 589 /* both ports */ 590 ofs = 0; 591 for (ii = 0; ii < PHY_PORTS; ++ii) { 592 brcmusb_usb_mdio_write(ctrl_base, 0x1f, (0x8040 + ofs), 593 MDIO_USB3); 594 brcmusb_usb_mdio_write(ctrl_base, 0x03, 0x0090, MDIO_USB3); 595 brcmusb_usb_mdio_write(ctrl_base, 0x04, 0x0134, MDIO_USB3); 596 brcmusb_usb_mdio_write(ctrl_base, 0x1f, (0x8020 + ofs), 597 MDIO_USB3); 598 brcmusb_usb_mdio_write(ctrl_base, 0x01, 0x00e2, MDIO_USB3); 599 ofs = PHY_PORT_SELECT_1; 600 } 601 602 /* restart PLL sequence */ 603 USB_CTRL_SET(ctrl_base, USB30_CTL1, PHY3_PLL_SEQ_START); 604 /* Give PLL enough time to lock */ 605 usleep_range(1000, 2000); 606} 607 608static void brcmusb_usb3_ssc_enable(void __iomem *ctrl_base) 609{ 610 u32 val; 611 612 /* Enable USB 3.0 TX spread spectrum */ 613 brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x8040, MDIO_USB3); 614 val = brcmusb_usb_mdio_read(ctrl_base, 0x01, MDIO_USB3) | 0xf; 615 brcmusb_usb_mdio_write(ctrl_base, 0x01, val, MDIO_USB3); 616 617 /* Currently, USB 3.0 SSC is enabled via port 0 MDIO registers, 618 * which should have been adequate. However, due to a bug in the 619 * USB 3.0 PHY, it must be enabled via both ports (HWUSB3DVT-26). 620 */ 621 brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x9040, MDIO_USB3); 622 val = brcmusb_usb_mdio_read(ctrl_base, 0x01, MDIO_USB3) | 0xf; 623 brcmusb_usb_mdio_write(ctrl_base, 0x01, val, MDIO_USB3); 624} 625 626static void brcmusb_usb3_phy_workarounds(struct brcm_usb_init_params *params) 627{ 628 void __iomem *ctrl_base = params->regs[BRCM_REGS_CTRL]; 629 630 brcmusb_usb3_pll_fix(ctrl_base); 631 brcmusb_usb3_pll_54mhz(params); 632 brcmusb_usb3_ssc_enable(ctrl_base); 633 brcmusb_usb3_enable_pipe_reset(ctrl_base); 634 brcmusb_usb3_enable_sigdet(ctrl_base); 635 brcmusb_usb3_enable_skip_align(ctrl_base); 636 brcmusb_usb3_unfreeze_aeq(ctrl_base); 637} 638 639static void brcmusb_memc_fix(struct brcm_usb_init_params *params) 640{ 641 u32 prid; 642 643 if (params->selected_family != BRCM_FAMILY_7445D0) 644 return; 645 /* 646 * This is a workaround for HW7445-1869 where a DMA write ends up 647 * doing a read pre-fetch after the end of the DMA buffer. This 648 * causes a problem when the DMA buffer is at the end of physical 649 * memory, causing the pre-fetch read to access non-existent memory, 650 * and the chip bondout has MEMC2 disabled. When the pre-fetch read 651 * tries to use the disabled MEMC2, it hangs the bus. The workaround 652 * is to disable MEMC2 access in the usb controller which avoids 653 * the hang. 654 */ 655 656 prid = params->product_id & 0xfffff000; 657 switch (prid) { 658 case 0x72520000: 659 case 0x74480000: 660 case 0x74490000: 661 case 0x07252000: 662 case 0x07448000: 663 case 0x07449000: 664 USB_CTRL_UNSET_FAMILY(params, SETUP, SCB2_EN); 665 } 666} 667 668static void brcmusb_usb3_otp_fix(struct brcm_usb_init_params *params) 669{ 670 void __iomem *xhci_ec_base = params->regs[BRCM_REGS_XHCI_EC]; 671 u32 val; 672 673 if (params->family_id != 0x74371000 || !xhci_ec_base) 674 return; 675 brcm_usb_writel(0xa20c, USB_XHCI_EC_REG(xhci_ec_base, IRAADR)); 676 val = brcm_usb_readl(USB_XHCI_EC_REG(xhci_ec_base, IRADAT)); 677 678 /* set cfg_pick_ss_lock */ 679 val |= (1 << 27); 680 brcm_usb_writel(val, USB_XHCI_EC_REG(xhci_ec_base, IRADAT)); 681 682 /* Reset USB 3.0 PHY for workaround to take effect */ 683 USB_CTRL_UNSET(params->regs[BRCM_REGS_CTRL], USB30_CTL1, PHY3_RESETB); 684 USB_CTRL_SET(params->regs[BRCM_REGS_CTRL], USB30_CTL1, PHY3_RESETB); 685} 686 687static void brcmusb_xhci_soft_reset(struct brcm_usb_init_params *params, 688 int on_off) 689{ 690 /* Assert reset */ 691 if (on_off) { 692 if (USB_CTRL_MASK_FAMILY(params, USB_PM, XHC_SOFT_RESETB)) 693 USB_CTRL_UNSET_FAMILY(params, USB_PM, XHC_SOFT_RESETB); 694 else 695 USB_CTRL_UNSET_FAMILY(params, 696 USB30_CTL1, XHC_SOFT_RESETB); 697 } else { /* De-assert reset */ 698 if (USB_CTRL_MASK_FAMILY(params, USB_PM, XHC_SOFT_RESETB)) 699 USB_CTRL_SET_FAMILY(params, USB_PM, XHC_SOFT_RESETB); 700 else 701 USB_CTRL_SET_FAMILY(params, USB30_CTL1, 702 XHC_SOFT_RESETB); 703 } 704} 705 706/* 707 * Return the best map table family. The order is: 708 * - exact match of chip and major rev 709 * - exact match of chip and closest older major rev 710 * - default chip/rev. 711 * NOTE: The minor rev is always ignored. 712 */ 713static enum brcm_family_type get_family_type( 714 struct brcm_usb_init_params *params) 715{ 716 int last_type = -1; 717 u32 last_family = 0; 718 u32 family_no_major; 719 unsigned int x; 720 u32 family; 721 722 family = params->family_id & 0xfffffff0; 723 family_no_major = params->family_id & 0xffffff00; 724 for (x = 0; id_to_type_table[x].id; x++) { 725 if (family == id_to_type_table[x].id) 726 return id_to_type_table[x].type; 727 if (family_no_major == (id_to_type_table[x].id & 0xffffff00)) 728 if (family > id_to_type_table[x].id && 729 last_family < id_to_type_table[x].id) { 730 last_family = id_to_type_table[x].id; 731 last_type = id_to_type_table[x].type; 732 } 733 } 734 735 /* If no match, return the default family */ 736 if (last_type == -1) 737 return id_to_type_table[x].type; 738 return last_type; 739} 740 741static void usb_init_ipp(struct brcm_usb_init_params *params) 742{ 743 void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; 744 u32 reg; 745 u32 orig_reg; 746 747 /* Starting with the 7445d0, there are no longer separate 3.0 748 * versions of IOC and IPP. 749 */ 750 if (USB_CTRL_MASK_FAMILY(params, USB30_CTL1, USB3_IOC)) { 751 if (params->ioc) 752 USB_CTRL_SET_FAMILY(params, USB30_CTL1, USB3_IOC); 753 if (params->ipp == 1) 754 USB_CTRL_SET_FAMILY(params, USB30_CTL1, USB3_IPP); 755 } 756 757 reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP)); 758 orig_reg = reg; 759 if (USB_CTRL_MASK_FAMILY(params, SETUP, STRAP_CC_DRD_MODE_ENABLE_SEL)) 760 /* Never use the strap, it's going away. */ 761 reg &= ~(USB_CTRL_MASK_FAMILY(params, 762 SETUP, 763 STRAP_CC_DRD_MODE_ENABLE_SEL)); 764 if (USB_CTRL_MASK_FAMILY(params, SETUP, STRAP_IPP_SEL)) 765 /* override ipp strap pin (if it exits) */ 766 if (params->ipp != 2) 767 reg &= ~(USB_CTRL_MASK_FAMILY(params, SETUP, 768 STRAP_IPP_SEL)); 769 770 /* Override the default OC and PP polarity */ 771 reg &= ~(USB_CTRL_MASK(SETUP, IPP) | USB_CTRL_MASK(SETUP, IOC)); 772 if (params->ioc) 773 reg |= USB_CTRL_MASK(SETUP, IOC); 774 if (params->ipp == 1) 775 reg |= USB_CTRL_MASK(SETUP, IPP); 776 brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); 777 778 /* 779 * If we're changing IPP, make sure power is off long enough 780 * to turn off any connected devices. 781 */ 782 if ((reg ^ orig_reg) & USB_CTRL_MASK(SETUP, IPP)) 783 msleep(50); 784} 785 786static void usb_wake_enable(struct brcm_usb_init_params *params, 787 bool enable) 788{ 789 void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; 790 791 if (enable) 792 USB_CTRL_SET(ctrl, USB_PM, RMTWKUP_EN); 793 else 794 USB_CTRL_UNSET(ctrl, USB_PM, RMTWKUP_EN); 795} 796 797static void usb_init_common(struct brcm_usb_init_params *params) 798{ 799 u32 reg; 800 void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; 801 802 /* Clear any pending wake conditions */ 803 usb_wake_enable(params, false); 804 reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_PM_STATUS)); 805 brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_PM_STATUS)); 806 807 /* Take USB out of power down */ 808 if (USB_CTRL_MASK_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN)) { 809 USB_CTRL_UNSET_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN); 810 /* 1 millisecond - for USB clocks to settle down */ 811 usleep_range(1000, 2000); 812 } 813 814 if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB_PWRDN)) { 815 USB_CTRL_UNSET_FAMILY(params, USB_PM, USB_PWRDN); 816 /* 1 millisecond - for USB clocks to settle down */ 817 usleep_range(1000, 2000); 818 } 819 820 if (params->selected_family != BRCM_FAMILY_74371A0 && 821 (BRCM_ID(params->family_id) != 0x7364)) 822 /* 823 * HW7439-637: 7439a0 and its derivatives do not have large 824 * enough descriptor storage for this. 825 */ 826 USB_CTRL_SET_FAMILY(params, SETUP, SS_EHCI64BIT_EN); 827 828 /* Block auto PLL suspend by USB2 PHY (Sasi) */ 829 USB_CTRL_SET(ctrl, PLL_CTL, PLL_SUSPEND_EN); 830 831 reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP)); 832 if (params->selected_family == BRCM_FAMILY_7364A0) 833 /* Suppress overcurrent indication from USB30 ports for A0 */ 834 reg |= USB_CTRL_MASK_FAMILY(params, SETUP, OC3_DISABLE); 835 836 brcmusb_usb_phy_ldo_fix(ctrl); 837 brcmusb_usb2_eye_fix(ctrl); 838 839 /* 840 * Make sure the the second and third memory controller 841 * interfaces are enabled if they exist. 842 */ 843 if (USB_CTRL_MASK_FAMILY(params, SETUP, SCB1_EN)) 844 reg |= USB_CTRL_MASK_FAMILY(params, SETUP, SCB1_EN); 845 if (USB_CTRL_MASK_FAMILY(params, SETUP, SCB2_EN)) 846 reg |= USB_CTRL_MASK_FAMILY(params, SETUP, SCB2_EN); 847 brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); 848 849 brcmusb_memc_fix(params); 850 851 if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) { 852 reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); 853 reg &= ~USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, 854 PORT_MODE); 855 reg |= params->mode; 856 brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); 857 } 858 if (USB_CTRL_MASK_FAMILY(params, USB_PM, BDC_SOFT_RESETB)) { 859 switch (params->mode) { 860 case USB_CTLR_MODE_HOST: 861 USB_CTRL_UNSET_FAMILY(params, USB_PM, BDC_SOFT_RESETB); 862 break; 863 default: 864 USB_CTRL_UNSET_FAMILY(params, USB_PM, BDC_SOFT_RESETB); 865 USB_CTRL_SET_FAMILY(params, USB_PM, BDC_SOFT_RESETB); 866 break; 867 } 868 } 869 if (USB_CTRL_MASK_FAMILY(params, SETUP, CC_DRD_MODE_ENABLE)) { 870 if (params->mode == USB_CTLR_MODE_TYPEC_PD) 871 USB_CTRL_SET_FAMILY(params, SETUP, CC_DRD_MODE_ENABLE); 872 else 873 USB_CTRL_UNSET_FAMILY(params, SETUP, 874 CC_DRD_MODE_ENABLE); 875 } 876} 877 878static void usb_init_eohci(struct brcm_usb_init_params *params) 879{ 880 u32 reg; 881 void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; 882 883 if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB20_HC_RESETB)) 884 USB_CTRL_SET_FAMILY(params, USB_PM, USB20_HC_RESETB); 885 886 if (params->selected_family == BRCM_FAMILY_7366C0) 887 /* 888 * Don't enable this so the memory controller doesn't read 889 * into memory holes. NOTE: This bit is low true on 7366C0. 890 */ 891 USB_CTRL_SET(ctrl, EBRIDGE, ESTOP_SCB_REQ); 892 893 /* Setup the endian bits */ 894 reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP)); 895 reg &= ~USB_CTRL_SETUP_ENDIAN_BITS; 896 reg |= USB_CTRL_MASK_FAMILY(params, SETUP, ENDIAN); 897 brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); 898 899 if (params->selected_family == BRCM_FAMILY_7271A0) 900 /* Enable LS keep alive fix for certain keyboards */ 901 USB_CTRL_SET(ctrl, OBRIDGE, LS_KEEP_ALIVE); 902 903 if (params->family_id == 0x72550000) { 904 /* 905 * Make the burst size 512 bytes to fix a hardware bug 906 * on the 7255a0. See HW7255-24. 907 */ 908 reg = brcm_usb_readl(USB_CTRL_REG(ctrl, EBRIDGE)); 909 reg &= ~USB_CTRL_MASK(EBRIDGE, EBR_SCB_SIZE); 910 reg |= 0x800; 911 brcm_usb_writel(reg, USB_CTRL_REG(ctrl, EBRIDGE)); 912 } 913} 914 915static void usb_init_xhci(struct brcm_usb_init_params *params) 916{ 917 void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; 918 919 USB_CTRL_UNSET(ctrl, USB30_PCTL, PHY3_IDDQ_OVERRIDE); 920 /* 1 millisecond - for USB clocks to settle down */ 921 usleep_range(1000, 2000); 922 923 if (BRCM_ID(params->family_id) == 0x7366) { 924 /* 925 * The PHY3_SOFT_RESETB bits default to the wrong state. 926 */ 927 USB_CTRL_SET(ctrl, USB30_PCTL, PHY3_SOFT_RESETB); 928 USB_CTRL_SET(ctrl, USB30_PCTL, PHY3_SOFT_RESETB_P1); 929 } 930 931 /* 932 * Kick start USB3 PHY 933 * Make sure it's low to insure a rising edge. 934 */ 935 USB_CTRL_UNSET(ctrl, USB30_CTL1, PHY3_PLL_SEQ_START); 936 USB_CTRL_SET(ctrl, USB30_CTL1, PHY3_PLL_SEQ_START); 937 938 brcmusb_usb3_phy_workarounds(params); 939 brcmusb_xhci_soft_reset(params, 0); 940 brcmusb_usb3_otp_fix(params); 941} 942 943static void usb_uninit_common(struct brcm_usb_init_params *params) 944{ 945 if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB_PWRDN)) 946 USB_CTRL_SET_FAMILY(params, USB_PM, USB_PWRDN); 947 948 if (USB_CTRL_MASK_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN)) 949 USB_CTRL_SET_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN); 950 if (params->wake_enabled) 951 usb_wake_enable(params, true); 952} 953 954static void usb_uninit_eohci(struct brcm_usb_init_params *params) 955{ 956} 957 958static void usb_uninit_xhci(struct brcm_usb_init_params *params) 959{ 960 brcmusb_xhci_soft_reset(params, 1); 961 USB_CTRL_SET(params->regs[BRCM_REGS_CTRL], USB30_PCTL, 962 PHY3_IDDQ_OVERRIDE); 963} 964 965static int usb_get_dual_select(struct brcm_usb_init_params *params) 966{ 967 void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; 968 u32 reg = 0; 969 970 pr_debug("%s\n", __func__); 971 if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) { 972 reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); 973 reg &= USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, 974 PORT_MODE); 975 } 976 return reg; 977} 978 979static void usb_set_dual_select(struct brcm_usb_init_params *params, int mode) 980{ 981 void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; 982 u32 reg; 983 984 pr_debug("%s\n", __func__); 985 986 if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) { 987 reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); 988 reg &= ~USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, 989 PORT_MODE); 990 reg |= mode; 991 brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); 992 } 993} 994 995static const struct brcm_usb_init_ops bcm7445_ops = { 996 .init_ipp = usb_init_ipp, 997 .init_common = usb_init_common, 998 .init_eohci = usb_init_eohci, 999 .init_xhci = usb_init_xhci, 1000 .uninit_common = usb_uninit_common, 1001 .uninit_eohci = usb_uninit_eohci, 1002 .uninit_xhci = usb_uninit_xhci, 1003 .get_dual_select = usb_get_dual_select, 1004 .set_dual_select = usb_set_dual_select, 1005}; 1006 1007void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params) 1008{ 1009 int fam; 1010 1011 pr_debug("%s\n", __func__); 1012 1013 fam = get_family_type(params); 1014 params->selected_family = fam; 1015 params->usb_reg_bits_map = 1016 &usb_reg_bits_map_table[fam][0]; 1017 params->family_name = family_names[fam]; 1018 params->ops = &bcm7445_ops; 1019} 1020