1/****************************************************************************** 2 * 3 * This file is provided under a dual BSD/GPLv2 license. When using or 4 * redistributing this file, you may do so under either license. 5 * 6 * GPL LICENSE SUMMARY 7 * 8 * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH 9 * Copyright(c) 2016 Intel Deutschland GmbH 10 * Copyright(c) 2005 - 2014, 2018 - 2020 Intel Corporation 11 * 12 * This program is free software; you can redistribute it and/or modify 13 * it under the terms of version 2 of the GNU General Public License as 14 * published by the Free Software Foundation. 15 * 16 * This program is distributed in the hope that it will be useful, but 17 * WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 19 * General Public License for more details. 20 * 21 * The full GNU General Public License is included in this distribution 22 * in the file called COPYING. 23 * 24 * Contact Information: 25 * Intel Linux Wireless <linuxwifi@intel.com> 26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 27 * 28 * BSD LICENSE 29 * 30 * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH 31 * Copyright(c) 2016 Intel Deutschland GmbH 32 * Copyright(c) 2005 - 2014, 2018 - 2020 Intel Corporation 33 * All rights reserved. 34 * 35 * Redistribution and use in source and binary forms, with or without 36 * modification, are permitted provided that the following conditions 37 * are met: 38 * 39 * * Redistributions of source code must retain the above copyright 40 * notice, this list of conditions and the following disclaimer. 41 * * Redistributions in binary form must reproduce the above copyright 42 * notice, this list of conditions and the following disclaimer in 43 * the documentation and/or other materials provided with the 44 * distribution. 45 * * Neither the name Intel Corporation nor the names of its 46 * contributors may be used to endorse or promote products derived 47 * from this software without specific prior written permission. 48 * 49 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 50 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 51 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 52 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 53 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 54 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 55 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 56 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 57 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 58 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 59 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 60 *****************************************************************************/ 61 62#ifndef __iwl_prph_h__ 63#define __iwl_prph_h__ 64#include <linux/bitfield.h> 65 66/* 67 * Registers in this file are internal, not PCI bus memory mapped. 68 * Driver accesses these via HBUS_TARG_PRPH_* registers. 69 */ 70#define PRPH_BASE (0x00000) 71#define PRPH_END (0xFFFFF) 72 73/* APMG (power management) constants */ 74#define APMG_BASE (PRPH_BASE + 0x3000) 75#define APMG_CLK_CTRL_REG (APMG_BASE + 0x0000) 76#define APMG_CLK_EN_REG (APMG_BASE + 0x0004) 77#define APMG_CLK_DIS_REG (APMG_BASE + 0x0008) 78#define APMG_PS_CTRL_REG (APMG_BASE + 0x000c) 79#define APMG_PCIDEV_STT_REG (APMG_BASE + 0x0010) 80#define APMG_RFKILL_REG (APMG_BASE + 0x0014) 81#define APMG_RTC_INT_STT_REG (APMG_BASE + 0x001c) 82#define APMG_RTC_INT_MSK_REG (APMG_BASE + 0x0020) 83#define APMG_DIGITAL_SVR_REG (APMG_BASE + 0x0058) 84#define APMG_ANALOG_SVR_REG (APMG_BASE + 0x006C) 85 86#define APMS_CLK_VAL_MRB_FUNC_MODE (0x00000001) 87#define APMG_CLK_VAL_DMA_CLK_RQT (0x00000200) 88#define APMG_CLK_VAL_BSM_CLK_RQT (0x00000800) 89 90#define APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS (0x00400000) 91#define APMG_PS_CTRL_VAL_RESET_REQ (0x04000000) 92#define APMG_PS_CTRL_MSK_PWR_SRC (0x03000000) 93#define APMG_PS_CTRL_VAL_PWR_SRC_VMAIN (0x00000000) 94#define APMG_PS_CTRL_VAL_PWR_SRC_VAUX (0x02000000) 95#define APMG_SVR_VOLTAGE_CONFIG_BIT_MSK (0x000001E0) /* bit 8:5 */ 96#define APMG_SVR_DIGITAL_VOLTAGE_1_32 (0x00000060) 97 98#define APMG_PCIDEV_STT_VAL_PERSIST_DIS (0x00000200) 99#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800) 100#define APMG_PCIDEV_STT_VAL_WAKE_ME (0x00004000) 101 102#define APMG_RTC_INT_STT_RFKILL (0x10000000) 103 104/* Device system time */ 105#define DEVICE_SYSTEM_TIME_REG 0xA0206C 106 107/* Device NMI register and value for 8000 family and lower hw's */ 108#define DEVICE_SET_NMI_REG 0x00a01c30 109#define DEVICE_SET_NMI_VAL_DRV BIT(7) 110/* Device NMI register and value for 9000 family and above hw's */ 111#define UREG_NIC_SET_NMI_DRIVER 0x00a05c10 112#define UREG_NIC_SET_NMI_DRIVER_NMI_FROM_DRIVER_MSK 0xff000000 113 114/* Shared registers (0x0..0x3ff, via target indirect or periphery */ 115#define SHR_BASE 0x00a10000 116 117/* Shared GP1 register */ 118#define SHR_APMG_GP1_REG 0x01dc 119#define SHR_APMG_GP1_REG_PRPH (SHR_BASE + SHR_APMG_GP1_REG) 120#define SHR_APMG_GP1_WF_XTAL_LP_EN 0x00000004 121#define SHR_APMG_GP1_CHICKEN_BIT_SELECT 0x80000000 122 123/* Shared DL_CFG register */ 124#define SHR_APMG_DL_CFG_REG 0x01c4 125#define SHR_APMG_DL_CFG_REG_PRPH (SHR_BASE + SHR_APMG_DL_CFG_REG) 126#define SHR_APMG_DL_CFG_RTCS_CLK_SELECTOR_MSK 0x000000c0 127#define SHR_APMG_DL_CFG_RTCS_CLK_INTERNAL_XTAL 0x00000080 128#define SHR_APMG_DL_CFG_DL_CLOCK_POWER_UP 0x00000100 129 130/* Shared APMG_XTAL_CFG register */ 131#define SHR_APMG_XTAL_CFG_REG 0x1c0 132#define SHR_APMG_XTAL_CFG_XTAL_ON_REQ 0x80000000 133 134/* 135 * Device reset for family 8000 136 * write to bit 24 in order to reset the CPU 137*/ 138#define RELEASE_CPU_RESET (0x300C) 139#define RELEASE_CPU_RESET_BIT BIT(24) 140 141/***************************************************************************** 142 * 7000/3000 series SHR DTS addresses * 143 *****************************************************************************/ 144 145#define SHR_MISC_WFM_DTS_EN (0x00a10024) 146#define DTSC_CFG_MODE (0x00a10604) 147#define DTSC_VREF_AVG (0x00a10648) 148#define DTSC_VREF5_AVG (0x00a1064c) 149#define DTSC_CFG_MODE_PERIODIC (0x2) 150#define DTSC_PTAT_AVG (0x00a10650) 151 152 153/** 154 * Tx Scheduler 155 * 156 * The Tx Scheduler selects the next frame to be transmitted, choosing TFDs 157 * (Transmit Frame Descriptors) from up to 16 circular Tx queues resident in 158 * host DRAM. It steers each frame's Tx command (which contains the frame 159 * data) into one of up to 7 prioritized Tx DMA FIFO channels within the 160 * device. A queue maps to only one (selectable by driver) Tx DMA channel, 161 * but one DMA channel may take input from several queues. 162 * 163 * Tx DMA FIFOs have dedicated purposes. 164 * 165 * For 5000 series and up, they are used differently 166 * (cf. iwl5000_default_queue_to_tx_fifo in iwl-5000.c): 167 * 168 * 0 -- EDCA BK (background) frames, lowest priority 169 * 1 -- EDCA BE (best effort) frames, normal priority 170 * 2 -- EDCA VI (video) frames, higher priority 171 * 3 -- EDCA VO (voice) and management frames, highest priority 172 * 4 -- unused 173 * 5 -- unused 174 * 6 -- unused 175 * 7 -- Commands 176 * 177 * Driver should normally map queues 0-6 to Tx DMA/FIFO channels 0-6. 178 * In addition, driver can map the remaining queues to Tx DMA/FIFO 179 * channels 0-3 to support 11n aggregation via EDCA DMA channels. 180 * 181 * The driver sets up each queue to work in one of two modes: 182 * 183 * 1) Scheduler-Ack, in which the scheduler automatically supports a 184 * block-ack (BA) window of up to 64 TFDs. In this mode, each queue 185 * contains TFDs for a unique combination of Recipient Address (RA) 186 * and Traffic Identifier (TID), that is, traffic of a given 187 * Quality-Of-Service (QOS) priority, destined for a single station. 188 * 189 * In scheduler-ack mode, the scheduler keeps track of the Tx status of 190 * each frame within the BA window, including whether it's been transmitted, 191 * and whether it's been acknowledged by the receiving station. The device 192 * automatically processes block-acks received from the receiving STA, 193 * and reschedules un-acked frames to be retransmitted (successful 194 * Tx completion may end up being out-of-order). 195 * 196 * The driver must maintain the queue's Byte Count table in host DRAM 197 * for this mode. 198 * This mode does not support fragmentation. 199 * 200 * 2) FIFO (a.k.a. non-Scheduler-ACK), in which each TFD is processed in order. 201 * The device may automatically retry Tx, but will retry only one frame 202 * at a time, until receiving ACK from receiving station, or reaching 203 * retry limit and giving up. 204 * 205 * The command queue (#4/#9) must use this mode! 206 * This mode does not require use of the Byte Count table in host DRAM. 207 * 208 * Driver controls scheduler operation via 3 means: 209 * 1) Scheduler registers 210 * 2) Shared scheduler data base in internal SRAM 211 * 3) Shared data in host DRAM 212 * 213 * Initialization: 214 * 215 * When loading, driver should allocate memory for: 216 * 1) 16 TFD circular buffers, each with space for (typically) 256 TFDs. 217 * 2) 16 Byte Count circular buffers in 16 KBytes contiguous memory 218 * (1024 bytes for each queue). 219 * 220 * After receiving "Alive" response from uCode, driver must initialize 221 * the scheduler (especially for queue #4/#9, the command queue, otherwise 222 * the driver can't issue commands!): 223 */ 224#define SCD_MEM_LOWER_BOUND (0x0000) 225 226/** 227 * Max Tx window size is the max number of contiguous TFDs that the scheduler 228 * can keep track of at one time when creating block-ack chains of frames. 229 * Note that "64" matches the number of ack bits in a block-ack packet. 230 */ 231#define SCD_WIN_SIZE 64 232#define SCD_FRAME_LIMIT 64 233 234#define SCD_TXFIFO_POS_TID (0) 235#define SCD_TXFIFO_POS_RA (4) 236#define SCD_QUEUE_RA_TID_MAP_RATID_MSK (0x01FF) 237 238/* agn SCD */ 239#define SCD_QUEUE_STTS_REG_POS_TXF (0) 240#define SCD_QUEUE_STTS_REG_POS_ACTIVE (3) 241#define SCD_QUEUE_STTS_REG_POS_WSL (4) 242#define SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN (19) 243#define SCD_QUEUE_STTS_REG_MSK (0x017F0000) 244 245#define SCD_QUEUE_CTX_REG1_CREDIT (0x00FFFF00) 246#define SCD_QUEUE_CTX_REG1_SUPER_CREDIT (0xFF000000) 247#define SCD_QUEUE_CTX_REG1_VAL(_n, _v) FIELD_PREP(SCD_QUEUE_CTX_REG1_ ## _n, _v) 248 249#define SCD_QUEUE_CTX_REG2_WIN_SIZE (0x0000007F) 250#define SCD_QUEUE_CTX_REG2_FRAME_LIMIT (0x007F0000) 251#define SCD_QUEUE_CTX_REG2_VAL(_n, _v) FIELD_PREP(SCD_QUEUE_CTX_REG2_ ## _n, _v) 252 253#define SCD_GP_CTRL_ENABLE_31_QUEUES BIT(0) 254#define SCD_GP_CTRL_AUTO_ACTIVE_MODE BIT(18) 255 256/* Context Data */ 257#define SCD_CONTEXT_MEM_LOWER_BOUND (SCD_MEM_LOWER_BOUND + 0x600) 258#define SCD_CONTEXT_MEM_UPPER_BOUND (SCD_MEM_LOWER_BOUND + 0x6A0) 259 260/* Tx status */ 261#define SCD_TX_STTS_MEM_LOWER_BOUND (SCD_MEM_LOWER_BOUND + 0x6A0) 262#define SCD_TX_STTS_MEM_UPPER_BOUND (SCD_MEM_LOWER_BOUND + 0x7E0) 263 264/* Translation Data */ 265#define SCD_TRANS_TBL_MEM_LOWER_BOUND (SCD_MEM_LOWER_BOUND + 0x7E0) 266#define SCD_TRANS_TBL_MEM_UPPER_BOUND (SCD_MEM_LOWER_BOUND + 0x808) 267 268#define SCD_CONTEXT_QUEUE_OFFSET(x)\ 269 (SCD_CONTEXT_MEM_LOWER_BOUND + ((x) * 8)) 270 271#define SCD_TX_STTS_QUEUE_OFFSET(x)\ 272 (SCD_TX_STTS_MEM_LOWER_BOUND + ((x) * 16)) 273 274#define SCD_TRANS_TBL_OFFSET_QUEUE(x) \ 275 ((SCD_TRANS_TBL_MEM_LOWER_BOUND + ((x) * 2)) & 0xfffc) 276 277#define SCD_BASE (PRPH_BASE + 0xa02c00) 278 279#define SCD_SRAM_BASE_ADDR (SCD_BASE + 0x0) 280#define SCD_DRAM_BASE_ADDR (SCD_BASE + 0x8) 281#define SCD_AIT (SCD_BASE + 0x0c) 282#define SCD_TXFACT (SCD_BASE + 0x10) 283#define SCD_ACTIVE (SCD_BASE + 0x14) 284#define SCD_QUEUECHAIN_SEL (SCD_BASE + 0xe8) 285#define SCD_CHAINEXT_EN (SCD_BASE + 0x244) 286#define SCD_AGGR_SEL (SCD_BASE + 0x248) 287#define SCD_INTERRUPT_MASK (SCD_BASE + 0x108) 288#define SCD_GP_CTRL (SCD_BASE + 0x1a8) 289#define SCD_EN_CTRL (SCD_BASE + 0x254) 290 291/*********************** END TX SCHEDULER *************************************/ 292 293/* Oscillator clock */ 294#define OSC_CLK (0xa04068) 295#define OSC_CLK_FORCE_CONTROL (0x8) 296 297#define FH_UCODE_LOAD_STATUS (0x1AF0) 298 299/* 300 * Replacing FH_UCODE_LOAD_STATUS 301 * This register is writen by driver and is read by uCode during boot flow. 302 * Note this address is cleared after MAC reset. 303 */ 304#define UREG_UCODE_LOAD_STATUS (0xa05c40) 305#define UREG_CPU_INIT_RUN (0xa05c44) 306 307#define LMPM_SECURE_UCODE_LOAD_CPU1_HDR_ADDR (0x1E78) 308#define LMPM_SECURE_UCODE_LOAD_CPU2_HDR_ADDR (0x1E7C) 309 310#define LMPM_SECURE_CPU1_HDR_MEM_SPACE (0x420000) 311#define LMPM_SECURE_CPU2_HDR_MEM_SPACE (0x420400) 312 313#define LMAC2_PRPH_OFFSET (0x100000) 314 315/* Rx FIFO */ 316#define RXF_SIZE_ADDR (0xa00c88) 317#define RXF_RD_D_SPACE (0xa00c40) 318#define RXF_RD_WR_PTR (0xa00c50) 319#define RXF_RD_RD_PTR (0xa00c54) 320#define RXF_RD_FENCE_PTR (0xa00c4c) 321#define RXF_SET_FENCE_MODE (0xa00c14) 322#define RXF_LD_WR2FENCE (0xa00c1c) 323#define RXF_FIFO_RD_FENCE_INC (0xa00c68) 324#define RXF_SIZE_BYTE_CND_POS (7) 325#define RXF_SIZE_BYTE_CNT_MSK (0x3ff << RXF_SIZE_BYTE_CND_POS) 326#define RXF_DIFF_FROM_PREV (0x200) 327#define RXF2C_DIFF_FROM_PREV (0x4e00) 328 329#define RXF_LD_FENCE_OFFSET_ADDR (0xa00c10) 330#define RXF_FIFO_RD_FENCE_ADDR (0xa00c0c) 331 332/* Tx FIFO */ 333#define TXF_FIFO_ITEM_CNT (0xa00438) 334#define TXF_WR_PTR (0xa00414) 335#define TXF_RD_PTR (0xa00410) 336#define TXF_FENCE_PTR (0xa00418) 337#define TXF_LOCK_FENCE (0xa00424) 338#define TXF_LARC_NUM (0xa0043c) 339#define TXF_READ_MODIFY_DATA (0xa00448) 340#define TXF_READ_MODIFY_ADDR (0xa0044c) 341 342/* UMAC Internal Tx Fifo */ 343#define TXF_CPU2_FIFO_ITEM_CNT (0xA00538) 344#define TXF_CPU2_WR_PTR (0xA00514) 345#define TXF_CPU2_RD_PTR (0xA00510) 346#define TXF_CPU2_FENCE_PTR (0xA00518) 347#define TXF_CPU2_LOCK_FENCE (0xA00524) 348#define TXF_CPU2_NUM (0xA0053C) 349#define TXF_CPU2_READ_MODIFY_DATA (0xA00548) 350#define TXF_CPU2_READ_MODIFY_ADDR (0xA0054C) 351 352/* Radio registers access */ 353#define RSP_RADIO_CMD (0xa02804) 354#define RSP_RADIO_RDDAT (0xa02814) 355#define RADIO_RSP_ADDR_POS (6) 356#define RADIO_RSP_RD_CMD (3) 357 358/* LTR control (Qu only) */ 359#define HPM_MAC_LTR_CSR 0xa0348c 360#define HPM_MAC_LRT_ENABLE_ALL 0xf 361/* also uses CSR_LTR_* for values */ 362#define HPM_UMAC_LTR 0xa03480 363 364/* FW monitor */ 365#define MON_BUFF_SAMPLE_CTL (0xa03c00) 366#define MON_BUFF_BASE_ADDR (0xa03c1c) 367#define MON_BUFF_END_ADDR (0xa03c40) 368#define MON_BUFF_WRPTR (0xa03c44) 369#define MON_BUFF_CYCLE_CNT (0xa03c48) 370/* FW monitor family 8000 and on */ 371#define MON_BUFF_BASE_ADDR_VER2 (0xa03c1c) 372#define MON_BUFF_END_ADDR_VER2 (0xa03c20) 373#define MON_BUFF_WRPTR_VER2 (0xa03c24) 374#define MON_BUFF_CYCLE_CNT_VER2 (0xa03c28) 375#define MON_BUFF_SHIFT_VER2 (0x8) 376/* FW monitor familiy AX210 and on */ 377#define DBGC_CUR_DBGBUF_BASE_ADDR_LSB (0xd03c20) 378#define DBGC_CUR_DBGBUF_BASE_ADDR_MSB (0xd03c24) 379#define DBGC_CUR_DBGBUF_STATUS (0xd03c1c) 380#define DBGC_DBGBUF_WRAP_AROUND (0xd03c2c) 381#define DBGC_CUR_DBGBUF_STATUS_OFFSET_MSK (0x00ffffff) 382#define DBGC_CUR_DBGBUF_STATUS_IDX_MSK (0x0f000000) 383 384#define MON_DMARB_RD_CTL_ADDR (0xa03c60) 385#define MON_DMARB_RD_DATA_ADDR (0xa03c5c) 386 387#define DBGC_IN_SAMPLE (0xa03c00) 388#define DBGC_OUT_CTRL (0xa03c0c) 389 390/* M2S registers */ 391#define LDBG_M2S_BUF_WPTR (0xa0476c) 392#define LDBG_M2S_BUF_WRAP_CNT (0xa04774) 393#define LDBG_M2S_BUF_WPTR_VAL_MSK (0x000fffff) 394#define LDBG_M2S_BUF_WRAP_CNT_VAL_MSK (0x000fffff) 395 396/* enable the ID buf for read */ 397#define WFPM_PS_CTL_CLR 0xA0300C 398#define WFMP_MAC_ADDR_0 0xA03080 399#define WFMP_MAC_ADDR_1 0xA03084 400#define LMPM_PMG_EN 0xA01CEC 401#define RADIO_REG_SYS_MANUAL_DFT_0 0xAD4078 402#define RFIC_REG_RD 0xAD0470 403#define WFPM_CTRL_REG 0xA03030 404#define WFPM_GP2 0xA030B4 405enum { 406 ENABLE_WFPM = BIT(31), 407 WFPM_AUX_CTL_AUX_IF_MAC_OWNER_MSK = 0x80000000, 408}; 409 410#define CNVI_AUX_MISC_CHIP 0xA200B0 411#define CNVR_AUX_MISC_CHIP 0xA2B800 412#define CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM 0xA29890 413#define CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR 0xA29938 414 415enum { 416 HW_STEP_LOCATION_BITS = 24, 417}; 418 419#define PREG_AUX_BUS_WPROT_0 0xA04CC0 420 421/* device family 9000 WPROT register */ 422#define PREG_PRPH_WPROT_9000 0xA04CE0 423/* device family 22000 WPROT register */ 424#define PREG_PRPH_WPROT_22000 0xA04D00 425 426#define SB_CPU_1_STATUS 0xA01E30 427#define SB_CPU_2_STATUS 0xA01E34 428#define UMAG_SB_CPU_1_STATUS 0xA038C0 429#define UMAG_SB_CPU_2_STATUS 0xA038C4 430#define UMAG_GEN_HW_STATUS 0xA038C8 431#define UREG_UMAC_CURRENT_PC 0xa05c18 432#define UREG_LMAC1_CURRENT_PC 0xa05c1c 433#define UREG_LMAC2_CURRENT_PC 0xa05c20 434 435/* For UMAG_GEN_HW_STATUS reg check */ 436enum { 437 UMAG_GEN_HW_IS_FPGA = BIT(1), 438}; 439 440/* FW chicken bits */ 441#define LMPM_CHICK 0xA01FF8 442enum { 443 LMPM_CHICK_EXTENDED_ADDR_SPACE = BIT(0), 444}; 445 446/* FW chicken bits */ 447#define LMPM_PAGE_PASS_NOTIF 0xA03824 448enum { 449 LMPM_PAGE_PASS_NOTIF_POS = BIT(20), 450}; 451 452#define UREG_CHICK (0xA05C00) 453#define UREG_CHICK_MSI_ENABLE BIT(24) 454#define UREG_CHICK_MSIX_ENABLE BIT(25) 455 456#define HPM_DEBUG 0xA03440 457#define PERSISTENCE_BIT BIT(12) 458#define PREG_WFPM_ACCESS BIT(12) 459 460#define HPM_HIPM_GEN_CFG 0xA03458 461#define HPM_HIPM_GEN_CFG_CR_PG_EN BIT(0) 462#define HPM_HIPM_GEN_CFG_CR_SLP_EN BIT(1) 463#define HPM_HIPM_GEN_CFG_CR_FORCE_ACTIVE BIT(10) 464 465#define UREG_DOORBELL_TO_ISR6 0xA05C04 466#define UREG_DOORBELL_TO_ISR6_NMI_BIT BIT(0) 467#define UREG_DOORBELL_TO_ISR6_SUSPEND BIT(18) 468#define UREG_DOORBELL_TO_ISR6_RESUME BIT(19) 469#define UREG_DOORBELL_TO_ISR6_PNVM BIT(20) 470 471#define FSEQ_ERROR_CODE 0xA340C8 472#define FSEQ_TOP_INIT_VERSION 0xA34038 473#define FSEQ_CNVIO_INIT_VERSION 0xA3403C 474#define FSEQ_OTP_VERSION 0xA340FC 475#define FSEQ_TOP_CONTENT_VERSION 0xA340F4 476#define FSEQ_ALIVE_TOKEN 0xA340F0 477#define FSEQ_CNVI_ID 0xA3408C 478#define FSEQ_CNVR_ID 0xA34090 479 480#define IWL_D3_SLEEP_STATUS_SUSPEND 0xD3 481#define IWL_D3_SLEEP_STATUS_RESUME 0xD0 482#endif /* __iwl_prph_h__ */ 483