1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Driver for the Texas Instruments DP83848 PHY
4 *
5 * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
6 */
7
8#include <linux/module.h>
9#include <linux/phy.h>
10
11#define TI_DP83848C_PHY_ID		0x20005ca0
12#define TI_DP83620_PHY_ID		0x20005ce0
13#define NS_DP83848C_PHY_ID		0x20005c90
14#define TLK10X_PHY_ID			0x2000a210
15
16/* Registers */
17#define DP83848_MICR			0x11 /* MII Interrupt Control Register */
18#define DP83848_MISR			0x12 /* MII Interrupt Status Register */
19
20/* MICR Register Fields */
21#define DP83848_MICR_INT_OE		BIT(0) /* Interrupt Output Enable */
22#define DP83848_MICR_INTEN		BIT(1) /* Interrupt Enable */
23
24/* MISR Register Fields */
25#define DP83848_MISR_RHF_INT_EN		BIT(0) /* Receive Error Counter */
26#define DP83848_MISR_FHF_INT_EN		BIT(1) /* False Carrier Counter */
27#define DP83848_MISR_ANC_INT_EN		BIT(2) /* Auto-negotiation complete */
28#define DP83848_MISR_DUP_INT_EN		BIT(3) /* Duplex Status */
29#define DP83848_MISR_SPD_INT_EN		BIT(4) /* Speed status */
30#define DP83848_MISR_LINK_INT_EN	BIT(5) /* Link status */
31#define DP83848_MISR_ED_INT_EN		BIT(6) /* Energy detect */
32#define DP83848_MISR_LQM_INT_EN		BIT(7) /* Link Quality Monitor */
33
34#define DP83848_INT_EN_MASK		\
35	(DP83848_MISR_ANC_INT_EN |	\
36	 DP83848_MISR_DUP_INT_EN |	\
37	 DP83848_MISR_SPD_INT_EN |	\
38	 DP83848_MISR_LINK_INT_EN)
39
40static int dp83848_ack_interrupt(struct phy_device *phydev)
41{
42	int err = phy_read(phydev, DP83848_MISR);
43
44	return err < 0 ? err : 0;
45}
46
47static int dp83848_config_intr(struct phy_device *phydev)
48{
49	int control, ret;
50
51	control = phy_read(phydev, DP83848_MICR);
52	if (control < 0)
53		return control;
54
55	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
56		control |= DP83848_MICR_INT_OE;
57		control |= DP83848_MICR_INTEN;
58
59		ret = phy_write(phydev, DP83848_MISR, DP83848_INT_EN_MASK);
60		if (ret < 0)
61			return ret;
62	} else {
63		control &= ~DP83848_MICR_INTEN;
64	}
65
66	return phy_write(phydev, DP83848_MICR, control);
67}
68
69static int dp83848_config_init(struct phy_device *phydev)
70{
71	int val;
72
73	/* DP83620 always reports Auto Negotiation Ability on BMSR. Instead,
74	 * we check initial value of BMCR Auto negotiation enable bit
75	 */
76	val = phy_read(phydev, MII_BMCR);
77	if (!(val & BMCR_ANENABLE))
78		phydev->autoneg = AUTONEG_DISABLE;
79
80	return 0;
81}
82
83static struct mdio_device_id __maybe_unused dp83848_tbl[] = {
84	{ TI_DP83848C_PHY_ID, 0xfffffff0 },
85	{ NS_DP83848C_PHY_ID, 0xfffffff0 },
86	{ TI_DP83620_PHY_ID, 0xfffffff0 },
87	{ TLK10X_PHY_ID, 0xfffffff0 },
88	{ }
89};
90MODULE_DEVICE_TABLE(mdio, dp83848_tbl);
91
92#define DP83848_PHY_DRIVER(_id, _name, _config_init)		\
93	{							\
94		.phy_id		= _id,				\
95		.phy_id_mask	= 0xfffffff0,			\
96		.name		= _name,			\
97		/* PHY_BASIC_FEATURES */			\
98								\
99		.soft_reset	= genphy_soft_reset,		\
100		.config_init	= _config_init,			\
101		.suspend	= genphy_suspend,		\
102		.resume		= genphy_resume,		\
103								\
104		/* IRQ related */				\
105		.ack_interrupt	= dp83848_ack_interrupt,	\
106		.config_intr	= dp83848_config_intr,		\
107	}
108
109static struct phy_driver dp83848_driver[] = {
110	DP83848_PHY_DRIVER(TI_DP83848C_PHY_ID, "TI DP83848C 10/100 Mbps PHY",
111			   NULL),
112	DP83848_PHY_DRIVER(NS_DP83848C_PHY_ID, "NS DP83848C 10/100 Mbps PHY",
113			   NULL),
114	DP83848_PHY_DRIVER(TI_DP83620_PHY_ID, "TI DP83620 10/100 Mbps PHY",
115			   dp83848_config_init),
116	DP83848_PHY_DRIVER(TLK10X_PHY_ID, "TI TLK10X 10/100 Mbps PHY",
117			   NULL),
118};
119module_phy_driver(dp83848_driver);
120
121MODULE_DESCRIPTION("Texas Instruments DP83848 PHY driver");
122MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
123MODULE_LICENSE("GPL v2");
124