1/* 2 * Copyright (c) 2012 Mellanox Technologies. All rights reserved. 3 * 4 * This software is available to you under a choice of one of two 5 * licenses. You may choose to be licensed under the terms of the GNU 6 * General Public License (GPL) Version 2, available from the file 7 * COPYING in the main directory of this source tree, or the 8 * OpenIB.org BSD license below: 9 * 10 * Redistribution and use in source and binary forms, with or 11 * without modification, are permitted provided that the following 12 * conditions are met: 13 * 14 * - Redistributions of source code must retain the above 15 * copyright notice, this list of conditions and the following 16 * disclaimer. 17 * 18 * - Redistributions in binary form must reproduce the above 19 * copyright notice, this list of conditions and the following 20 * disclaimer in the documentation and/or other materials 21 * provided with the distribution. 22 * 23 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 24 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF 25 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 26 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS 27 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN 28 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 29 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE 30 * SOFTWARE. 31 * 32 */ 33 34#include <linux/mlx4/device.h> 35#include <linux/clocksource.h> 36 37#include "mlx4_en.h" 38 39/* mlx4_en_read_clock - read raw cycle counter (to be used by time counter) 40 */ 41static u64 mlx4_en_read_clock(const struct cyclecounter *tc) 42{ 43 struct mlx4_en_dev *mdev = 44 container_of(tc, struct mlx4_en_dev, cycles); 45 struct mlx4_dev *dev = mdev->dev; 46 47 return mlx4_read_clock(dev) & tc->mask; 48} 49 50u64 mlx4_en_get_cqe_ts(struct mlx4_cqe *cqe) 51{ 52 u64 hi, lo; 53 struct mlx4_ts_cqe *ts_cqe = (struct mlx4_ts_cqe *)cqe; 54 55 lo = (u64)be16_to_cpu(ts_cqe->timestamp_lo); 56 hi = ((u64)be32_to_cpu(ts_cqe->timestamp_hi) + !lo) << 16; 57 58 return hi | lo; 59} 60 61void mlx4_en_fill_hwtstamps(struct mlx4_en_dev *mdev, 62 struct skb_shared_hwtstamps *hwts, 63 u64 timestamp) 64{ 65 unsigned int seq; 66 u64 nsec; 67 68 do { 69 seq = read_seqbegin(&mdev->clock_lock); 70 nsec = timecounter_cyc2time(&mdev->clock, timestamp); 71 } while (read_seqretry(&mdev->clock_lock, seq)); 72 73 memset(hwts, 0, sizeof(struct skb_shared_hwtstamps)); 74 hwts->hwtstamp = ns_to_ktime(nsec); 75} 76 77/** 78 * mlx4_en_remove_timestamp - disable PTP device 79 * @mdev: board private structure 80 * 81 * Stop the PTP support. 82 **/ 83void mlx4_en_remove_timestamp(struct mlx4_en_dev *mdev) 84{ 85 if (mdev->ptp_clock) { 86 ptp_clock_unregister(mdev->ptp_clock); 87 mdev->ptp_clock = NULL; 88 mlx4_info(mdev, "removed PHC\n"); 89 } 90} 91 92#define MLX4_EN_WRAP_AROUND_SEC 10UL 93/* By scheduling the overflow check every 5 seconds, we have a reasonably 94 * good chance we wont miss a wrap around. 95 * TOTO: Use a timer instead of a work queue to increase the guarantee. 96 */ 97#define MLX4_EN_OVERFLOW_PERIOD (MLX4_EN_WRAP_AROUND_SEC * HZ / 2) 98 99void mlx4_en_ptp_overflow_check(struct mlx4_en_dev *mdev) 100{ 101 bool timeout = time_is_before_jiffies(mdev->last_overflow_check + 102 MLX4_EN_OVERFLOW_PERIOD); 103 unsigned long flags; 104 105 if (timeout) { 106 write_seqlock_irqsave(&mdev->clock_lock, flags); 107 timecounter_read(&mdev->clock); 108 write_sequnlock_irqrestore(&mdev->clock_lock, flags); 109 mdev->last_overflow_check = jiffies; 110 } 111} 112 113/** 114 * mlx4_en_phc_adjfreq - adjust the frequency of the hardware clock 115 * @ptp: ptp clock structure 116 * @delta: Desired frequency change in parts per billion 117 * 118 * Adjust the frequency of the PHC cycle counter by the indicated delta from 119 * the base frequency. 120 **/ 121static int mlx4_en_phc_adjfreq(struct ptp_clock_info *ptp, s32 delta) 122{ 123 u64 adj; 124 u32 diff, mult; 125 int neg_adj = 0; 126 unsigned long flags; 127 struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev, 128 ptp_clock_info); 129 130 if (delta < 0) { 131 neg_adj = 1; 132 delta = -delta; 133 } 134 mult = mdev->nominal_c_mult; 135 adj = mult; 136 adj *= delta; 137 diff = div_u64(adj, 1000000000ULL); 138 139 write_seqlock_irqsave(&mdev->clock_lock, flags); 140 timecounter_read(&mdev->clock); 141 mdev->cycles.mult = neg_adj ? mult - diff : mult + diff; 142 write_sequnlock_irqrestore(&mdev->clock_lock, flags); 143 144 return 0; 145} 146 147/** 148 * mlx4_en_phc_adjtime - Shift the time of the hardware clock 149 * @ptp: ptp clock structure 150 * @delta: Desired change in nanoseconds 151 * 152 * Adjust the timer by resetting the timecounter structure. 153 **/ 154static int mlx4_en_phc_adjtime(struct ptp_clock_info *ptp, s64 delta) 155{ 156 struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev, 157 ptp_clock_info); 158 unsigned long flags; 159 160 write_seqlock_irqsave(&mdev->clock_lock, flags); 161 timecounter_adjtime(&mdev->clock, delta); 162 write_sequnlock_irqrestore(&mdev->clock_lock, flags); 163 164 return 0; 165} 166 167/** 168 * mlx4_en_phc_gettime - Reads the current time from the hardware clock 169 * @ptp: ptp clock structure 170 * @ts: timespec structure to hold the current time value 171 * 172 * Read the timecounter and return the correct value in ns after converting 173 * it into a struct timespec. 174 **/ 175static int mlx4_en_phc_gettime(struct ptp_clock_info *ptp, 176 struct timespec64 *ts) 177{ 178 struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev, 179 ptp_clock_info); 180 unsigned long flags; 181 u64 ns; 182 183 write_seqlock_irqsave(&mdev->clock_lock, flags); 184 ns = timecounter_read(&mdev->clock); 185 write_sequnlock_irqrestore(&mdev->clock_lock, flags); 186 187 *ts = ns_to_timespec64(ns); 188 189 return 0; 190} 191 192/** 193 * mlx4_en_phc_settime - Set the current time on the hardware clock 194 * @ptp: ptp clock structure 195 * @ts: timespec containing the new time for the cycle counter 196 * 197 * Reset the timecounter to use a new base value instead of the kernel 198 * wall timer value. 199 **/ 200static int mlx4_en_phc_settime(struct ptp_clock_info *ptp, 201 const struct timespec64 *ts) 202{ 203 struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev, 204 ptp_clock_info); 205 u64 ns = timespec64_to_ns(ts); 206 unsigned long flags; 207 208 /* reset the timecounter */ 209 write_seqlock_irqsave(&mdev->clock_lock, flags); 210 timecounter_init(&mdev->clock, &mdev->cycles, ns); 211 write_sequnlock_irqrestore(&mdev->clock_lock, flags); 212 213 return 0; 214} 215 216/** 217 * mlx4_en_phc_enable - enable or disable an ancillary feature 218 * @ptp: ptp clock structure 219 * @request: Desired resource to enable or disable 220 * @on: Caller passes one to enable or zero to disable 221 * 222 * Enable (or disable) ancillary features of the PHC subsystem. 223 * Currently, no ancillary features are supported. 224 **/ 225static int mlx4_en_phc_enable(struct ptp_clock_info __always_unused *ptp, 226 struct ptp_clock_request __always_unused *request, 227 int __always_unused on) 228{ 229 return -EOPNOTSUPP; 230} 231 232static const struct ptp_clock_info mlx4_en_ptp_clock_info = { 233 .owner = THIS_MODULE, 234 .max_adj = 100000000, 235 .n_alarm = 0, 236 .n_ext_ts = 0, 237 .n_per_out = 0, 238 .n_pins = 0, 239 .pps = 0, 240 .adjfreq = mlx4_en_phc_adjfreq, 241 .adjtime = mlx4_en_phc_adjtime, 242 .gettime64 = mlx4_en_phc_gettime, 243 .settime64 = mlx4_en_phc_settime, 244 .enable = mlx4_en_phc_enable, 245}; 246 247 248/* This function calculates the max shift that enables the user range 249 * of MLX4_EN_WRAP_AROUND_SEC values in the cycles register. 250 */ 251static u32 freq_to_shift(u16 freq) 252{ 253 u32 freq_khz = freq * 1000; 254 u64 max_val_cycles = freq_khz * 1000 * MLX4_EN_WRAP_AROUND_SEC; 255 u64 max_val_cycles_rounded = 1ULL << fls64(max_val_cycles - 1); 256 /* calculate max possible multiplier in order to fit in 64bit */ 257 u64 max_mul = div64_u64(ULLONG_MAX, max_val_cycles_rounded); 258 259 /* This comes from the reverse of clocksource_khz2mult */ 260 return ilog2(div_u64(max_mul * freq_khz, 1000000)); 261} 262 263void mlx4_en_init_timestamp(struct mlx4_en_dev *mdev) 264{ 265 struct mlx4_dev *dev = mdev->dev; 266 unsigned long flags; 267 268 /* mlx4_en_init_timestamp is called for each netdev. 269 * mdev->ptp_clock is common for all ports, skip initialization if 270 * was done for other port. 271 */ 272 if (mdev->ptp_clock) 273 return; 274 275 seqlock_init(&mdev->clock_lock); 276 277 memset(&mdev->cycles, 0, sizeof(mdev->cycles)); 278 mdev->cycles.read = mlx4_en_read_clock; 279 mdev->cycles.mask = CLOCKSOURCE_MASK(48); 280 mdev->cycles.shift = freq_to_shift(dev->caps.hca_core_clock); 281 mdev->cycles.mult = 282 clocksource_khz2mult(1000 * dev->caps.hca_core_clock, mdev->cycles.shift); 283 mdev->nominal_c_mult = mdev->cycles.mult; 284 285 write_seqlock_irqsave(&mdev->clock_lock, flags); 286 timecounter_init(&mdev->clock, &mdev->cycles, 287 ktime_to_ns(ktime_get_real())); 288 write_sequnlock_irqrestore(&mdev->clock_lock, flags); 289 290 /* Configure the PHC */ 291 mdev->ptp_clock_info = mlx4_en_ptp_clock_info; 292 snprintf(mdev->ptp_clock_info.name, 16, "mlx4 ptp"); 293 294 mdev->ptp_clock = ptp_clock_register(&mdev->ptp_clock_info, 295 &mdev->pdev->dev); 296 if (IS_ERR(mdev->ptp_clock)) { 297 mdev->ptp_clock = NULL; 298 mlx4_err(mdev, "ptp_clock_register failed\n"); 299 } else if (mdev->ptp_clock) { 300 mlx4_info(mdev, "registered PHC clock\n"); 301 } 302 303} 304