1// SPDX-License-Identifier: GPL-2.0-or-later 2 3/* Advanced Micro Devices Inc. AMD8111E Linux Network Driver 4 * Copyright (C) 2004 Advanced Micro Devices 5 * 6 * Copyright 2001,2002 Jeff Garzik <jgarzik@mandrakesoft.com> [ 8139cp.c,tg3.c ] 7 * Copyright (C) 2001, 2002 David S. Miller (davem@redhat.com)[ tg3.c] 8 * Copyright 1996-1999 Thomas Bogendoerfer [ pcnet32.c ] 9 * Derived from the lance driver written 1993,1994,1995 by Donald Becker. 10 * Copyright 1993 United States Government as represented by the 11 * Director, National Security Agency.[ pcnet32.c ] 12 * Carsten Langgaard, carstenl@mips.com [ pcnet32.c ] 13 * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. 14 * 15 16Module Name: 17 18 amd8111e.c 19 20Abstract: 21 22 AMD8111 based 10/100 Ethernet Controller Driver. 23 24Environment: 25 26 Kernel Mode 27 28Revision History: 29 3.0.0 30 Initial Revision. 31 3.0.1 32 1. Dynamic interrupt coalescing. 33 2. Removed prev_stats. 34 3. MII support. 35 4. Dynamic IPG support 36 3.0.2 05/29/2003 37 1. Bug fix: Fixed failure to send jumbo packets larger than 4k. 38 2. Bug fix: Fixed VLAN support failure. 39 3. Bug fix: Fixed receive interrupt coalescing bug. 40 4. Dynamic IPG support is disabled by default. 41 3.0.3 06/05/2003 42 1. Bug fix: Fixed failure to close the interface if SMP is enabled. 43 3.0.4 12/09/2003 44 1. Added set_mac_address routine for bonding driver support. 45 2. Tested the driver for bonding support 46 3. Bug fix: Fixed mismach in actual receive buffer lenth and lenth 47 indicated to the h/w. 48 4. Modified amd8111e_rx() routine to receive all the received packets 49 in the first interrupt. 50 5. Bug fix: Corrected rx_errors reported in get_stats() function. 51 3.0.5 03/22/2004 52 1. Added NAPI support 53 54*/ 55 56 57#include <linux/module.h> 58#include <linux/kernel.h> 59#include <linux/types.h> 60#include <linux/compiler.h> 61#include <linux/delay.h> 62#include <linux/interrupt.h> 63#include <linux/ioport.h> 64#include <linux/pci.h> 65#include <linux/netdevice.h> 66#include <linux/etherdevice.h> 67#include <linux/skbuff.h> 68#include <linux/ethtool.h> 69#include <linux/mii.h> 70#include <linux/if_vlan.h> 71#include <linux/ctype.h> 72#include <linux/crc32.h> 73#include <linux/dma-mapping.h> 74 75#include <asm/io.h> 76#include <asm/byteorder.h> 77#include <linux/uaccess.h> 78 79#if IS_ENABLED(CONFIG_VLAN_8021Q) 80#define AMD8111E_VLAN_TAG_USED 1 81#else 82#define AMD8111E_VLAN_TAG_USED 0 83#endif 84 85#include "amd8111e.h" 86#define MODULE_NAME "amd8111e" 87MODULE_AUTHOR("Advanced Micro Devices, Inc."); 88MODULE_DESCRIPTION("AMD8111 based 10/100 Ethernet Controller."); 89MODULE_LICENSE("GPL"); 90module_param_array(speed_duplex, int, NULL, 0); 91MODULE_PARM_DESC(speed_duplex, "Set device speed and duplex modes, 0: Auto Negotiate, 1: 10Mbps Half Duplex, 2: 10Mbps Full Duplex, 3: 100Mbps Half Duplex, 4: 100Mbps Full Duplex"); 92module_param_array(coalesce, bool, NULL, 0); 93MODULE_PARM_DESC(coalesce, "Enable or Disable interrupt coalescing, 1: Enable, 0: Disable"); 94module_param_array(dynamic_ipg, bool, NULL, 0); 95MODULE_PARM_DESC(dynamic_ipg, "Enable or Disable dynamic IPG, 1: Enable, 0: Disable"); 96 97/* This function will read the PHY registers. */ 98static int amd8111e_read_phy(struct amd8111e_priv *lp, 99 int phy_id, int reg, u32 *val) 100{ 101 void __iomem *mmio = lp->mmio; 102 unsigned int reg_val; 103 unsigned int repeat= REPEAT_CNT; 104 105 reg_val = readl(mmio + PHY_ACCESS); 106 while (reg_val & PHY_CMD_ACTIVE) 107 reg_val = readl( mmio + PHY_ACCESS ); 108 109 writel( PHY_RD_CMD | ((phy_id & 0x1f) << 21) | 110 ((reg & 0x1f) << 16), mmio +PHY_ACCESS); 111 do{ 112 reg_val = readl(mmio + PHY_ACCESS); 113 udelay(30); /* It takes 30 us to read/write data */ 114 } while (--repeat && (reg_val & PHY_CMD_ACTIVE)); 115 if(reg_val & PHY_RD_ERR) 116 goto err_phy_read; 117 118 *val = reg_val & 0xffff; 119 return 0; 120err_phy_read: 121 *val = 0; 122 return -EINVAL; 123 124} 125 126/* This function will write into PHY registers. */ 127static int amd8111e_write_phy(struct amd8111e_priv *lp, 128 int phy_id, int reg, u32 val) 129{ 130 unsigned int repeat = REPEAT_CNT; 131 void __iomem *mmio = lp->mmio; 132 unsigned int reg_val; 133 134 reg_val = readl(mmio + PHY_ACCESS); 135 while (reg_val & PHY_CMD_ACTIVE) 136 reg_val = readl( mmio + PHY_ACCESS ); 137 138 writel( PHY_WR_CMD | ((phy_id & 0x1f) << 21) | 139 ((reg & 0x1f) << 16)|val, mmio + PHY_ACCESS); 140 141 do{ 142 reg_val = readl(mmio + PHY_ACCESS); 143 udelay(30); /* It takes 30 us to read/write the data */ 144 } while (--repeat && (reg_val & PHY_CMD_ACTIVE)); 145 146 if(reg_val & PHY_RD_ERR) 147 goto err_phy_write; 148 149 return 0; 150 151err_phy_write: 152 return -EINVAL; 153 154} 155 156/* This is the mii register read function provided to the mii interface. */ 157static int amd8111e_mdio_read(struct net_device *dev, int phy_id, int reg_num) 158{ 159 struct amd8111e_priv *lp = netdev_priv(dev); 160 unsigned int reg_val; 161 162 amd8111e_read_phy(lp,phy_id,reg_num,®_val); 163 return reg_val; 164 165} 166 167/* This is the mii register write function provided to the mii interface. */ 168static void amd8111e_mdio_write(struct net_device *dev, 169 int phy_id, int reg_num, int val) 170{ 171 struct amd8111e_priv *lp = netdev_priv(dev); 172 173 amd8111e_write_phy(lp, phy_id, reg_num, val); 174} 175 176/* This function will set PHY speed. During initialization sets 177 * the original speed to 100 full 178 */ 179static void amd8111e_set_ext_phy(struct net_device *dev) 180{ 181 struct amd8111e_priv *lp = netdev_priv(dev); 182 u32 bmcr,advert,tmp; 183 184 /* Determine mii register values to set the speed */ 185 advert = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_ADVERTISE); 186 tmp = advert & ~(ADVERTISE_ALL | ADVERTISE_100BASE4); 187 switch (lp->ext_phy_option){ 188 189 default: 190 case SPEED_AUTONEG: /* advertise all values */ 191 tmp |= ( ADVERTISE_10HALF|ADVERTISE_10FULL| 192 ADVERTISE_100HALF|ADVERTISE_100FULL) ; 193 break; 194 case SPEED10_HALF: 195 tmp |= ADVERTISE_10HALF; 196 break; 197 case SPEED10_FULL: 198 tmp |= ADVERTISE_10FULL; 199 break; 200 case SPEED100_HALF: 201 tmp |= ADVERTISE_100HALF; 202 break; 203 case SPEED100_FULL: 204 tmp |= ADVERTISE_100FULL; 205 break; 206 } 207 208 if(advert != tmp) 209 amd8111e_mdio_write(dev, lp->ext_phy_addr, MII_ADVERTISE, tmp); 210 /* Restart auto negotiation */ 211 bmcr = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_BMCR); 212 bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART); 213 amd8111e_mdio_write(dev, lp->ext_phy_addr, MII_BMCR, bmcr); 214 215} 216 217/* This function will unmap skb->data space and will free 218 * all transmit and receive skbuffs. 219 */ 220static int amd8111e_free_skbs(struct net_device *dev) 221{ 222 struct amd8111e_priv *lp = netdev_priv(dev); 223 struct sk_buff *rx_skbuff; 224 int i; 225 226 /* Freeing transmit skbs */ 227 for(i = 0; i < NUM_TX_BUFFERS; i++){ 228 if(lp->tx_skbuff[i]){ 229 dma_unmap_single(&lp->pci_dev->dev, 230 lp->tx_dma_addr[i], 231 lp->tx_skbuff[i]->len, DMA_TO_DEVICE); 232 dev_kfree_skb (lp->tx_skbuff[i]); 233 lp->tx_skbuff[i] = NULL; 234 lp->tx_dma_addr[i] = 0; 235 } 236 } 237 /* Freeing previously allocated receive buffers */ 238 for (i = 0; i < NUM_RX_BUFFERS; i++){ 239 rx_skbuff = lp->rx_skbuff[i]; 240 if(rx_skbuff != NULL){ 241 dma_unmap_single(&lp->pci_dev->dev, 242 lp->rx_dma_addr[i], 243 lp->rx_buff_len - 2, DMA_FROM_DEVICE); 244 dev_kfree_skb(lp->rx_skbuff[i]); 245 lp->rx_skbuff[i] = NULL; 246 lp->rx_dma_addr[i] = 0; 247 } 248 } 249 250 return 0; 251} 252 253/* This will set the receive buffer length corresponding 254 * to the mtu size of networkinterface. 255 */ 256static inline void amd8111e_set_rx_buff_len(struct net_device *dev) 257{ 258 struct amd8111e_priv *lp = netdev_priv(dev); 259 unsigned int mtu = dev->mtu; 260 261 if (mtu > ETH_DATA_LEN){ 262 /* MTU + ethernet header + FCS 263 * + optional VLAN tag + skb reserve space 2 264 */ 265 lp->rx_buff_len = mtu + ETH_HLEN + 10; 266 lp->options |= OPTION_JUMBO_ENABLE; 267 } else{ 268 lp->rx_buff_len = PKT_BUFF_SZ; 269 lp->options &= ~OPTION_JUMBO_ENABLE; 270 } 271} 272 273/* This function will free all the previously allocated buffers, 274 * determine new receive buffer length and will allocate new receive buffers. 275 * This function also allocates and initializes both the transmitter 276 * and receive hardware descriptors. 277 */ 278static int amd8111e_init_ring(struct net_device *dev) 279{ 280 struct amd8111e_priv *lp = netdev_priv(dev); 281 int i; 282 283 lp->rx_idx = lp->tx_idx = 0; 284 lp->tx_complete_idx = 0; 285 lp->tx_ring_idx = 0; 286 287 288 if(lp->opened) 289 /* Free previously allocated transmit and receive skbs */ 290 amd8111e_free_skbs(dev); 291 292 else{ 293 /* allocate the tx and rx descriptors */ 294 lp->tx_ring = dma_alloc_coherent(&lp->pci_dev->dev, 295 sizeof(struct amd8111e_tx_dr) * NUM_TX_RING_DR, 296 &lp->tx_ring_dma_addr, GFP_ATOMIC); 297 if (!lp->tx_ring) 298 goto err_no_mem; 299 300 lp->rx_ring = dma_alloc_coherent(&lp->pci_dev->dev, 301 sizeof(struct amd8111e_rx_dr) * NUM_RX_RING_DR, 302 &lp->rx_ring_dma_addr, GFP_ATOMIC); 303 if (!lp->rx_ring) 304 goto err_free_tx_ring; 305 } 306 307 /* Set new receive buff size */ 308 amd8111e_set_rx_buff_len(dev); 309 310 /* Allocating receive skbs */ 311 for (i = 0; i < NUM_RX_BUFFERS; i++) { 312 313 lp->rx_skbuff[i] = netdev_alloc_skb(dev, lp->rx_buff_len); 314 if (!lp->rx_skbuff[i]) { 315 /* Release previos allocated skbs */ 316 for(--i; i >= 0 ;i--) 317 dev_kfree_skb(lp->rx_skbuff[i]); 318 goto err_free_rx_ring; 319 } 320 skb_reserve(lp->rx_skbuff[i],2); 321 } 322 /* Initilaizing receive descriptors */ 323 for (i = 0; i < NUM_RX_BUFFERS; i++) { 324 lp->rx_dma_addr[i] = dma_map_single(&lp->pci_dev->dev, 325 lp->rx_skbuff[i]->data, 326 lp->rx_buff_len - 2, 327 DMA_FROM_DEVICE); 328 329 lp->rx_ring[i].buff_phy_addr = cpu_to_le32(lp->rx_dma_addr[i]); 330 lp->rx_ring[i].buff_count = cpu_to_le16(lp->rx_buff_len-2); 331 wmb(); 332 lp->rx_ring[i].rx_flags = cpu_to_le16(OWN_BIT); 333 } 334 335 /* Initializing transmit descriptors */ 336 for (i = 0; i < NUM_TX_RING_DR; i++) { 337 lp->tx_ring[i].buff_phy_addr = 0; 338 lp->tx_ring[i].tx_flags = 0; 339 lp->tx_ring[i].buff_count = 0; 340 } 341 342 return 0; 343 344err_free_rx_ring: 345 346 dma_free_coherent(&lp->pci_dev->dev, 347 sizeof(struct amd8111e_rx_dr) * NUM_RX_RING_DR, 348 lp->rx_ring, lp->rx_ring_dma_addr); 349 350err_free_tx_ring: 351 352 dma_free_coherent(&lp->pci_dev->dev, 353 sizeof(struct amd8111e_tx_dr) * NUM_TX_RING_DR, 354 lp->tx_ring, lp->tx_ring_dma_addr); 355 356err_no_mem: 357 return -ENOMEM; 358} 359 360/* This function will set the interrupt coalescing according 361 * to the input arguments 362 */ 363static int amd8111e_set_coalesce(struct net_device *dev, enum coal_mode cmod) 364{ 365 unsigned int timeout; 366 unsigned int event_count; 367 368 struct amd8111e_priv *lp = netdev_priv(dev); 369 void __iomem *mmio = lp->mmio; 370 struct amd8111e_coalesce_conf *coal_conf = &lp->coal_conf; 371 372 373 switch(cmod) 374 { 375 case RX_INTR_COAL : 376 timeout = coal_conf->rx_timeout; 377 event_count = coal_conf->rx_event_count; 378 if( timeout > MAX_TIMEOUT || 379 event_count > MAX_EVENT_COUNT ) 380 return -EINVAL; 381 382 timeout = timeout * DELAY_TIMER_CONV; 383 writel(VAL0|STINTEN, mmio+INTEN0); 384 writel((u32)DLY_INT_A_R0|( event_count<< 16 )|timeout, 385 mmio+DLY_INT_A); 386 break; 387 388 case TX_INTR_COAL : 389 timeout = coal_conf->tx_timeout; 390 event_count = coal_conf->tx_event_count; 391 if( timeout > MAX_TIMEOUT || 392 event_count > MAX_EVENT_COUNT ) 393 return -EINVAL; 394 395 396 timeout = timeout * DELAY_TIMER_CONV; 397 writel(VAL0|STINTEN,mmio+INTEN0); 398 writel((u32)DLY_INT_B_T0|( event_count<< 16 )|timeout, 399 mmio+DLY_INT_B); 400 break; 401 402 case DISABLE_COAL: 403 writel(0,mmio+STVAL); 404 writel(STINTEN, mmio+INTEN0); 405 writel(0, mmio +DLY_INT_B); 406 writel(0, mmio+DLY_INT_A); 407 break; 408 case ENABLE_COAL: 409 /* Start the timer */ 410 writel((u32)SOFT_TIMER_FREQ, mmio+STVAL); /* 0.5 sec */ 411 writel(VAL0|STINTEN, mmio+INTEN0); 412 break; 413 default: 414 break; 415 416 } 417 return 0; 418 419} 420 421/* This function initializes the device registers and starts the device. */ 422static int amd8111e_restart(struct net_device *dev) 423{ 424 struct amd8111e_priv *lp = netdev_priv(dev); 425 void __iomem *mmio = lp->mmio; 426 int i,reg_val; 427 428 /* stop the chip */ 429 writel(RUN, mmio + CMD0); 430 431 if(amd8111e_init_ring(dev)) 432 return -ENOMEM; 433 434 /* enable the port manager and set auto negotiation always */ 435 writel((u32) VAL1|EN_PMGR, mmio + CMD3 ); 436 writel((u32)XPHYANE|XPHYRST , mmio + CTRL2); 437 438 amd8111e_set_ext_phy(dev); 439 440 /* set control registers */ 441 reg_val = readl(mmio + CTRL1); 442 reg_val &= ~XMTSP_MASK; 443 writel( reg_val| XMTSP_128 | CACHE_ALIGN, mmio + CTRL1 ); 444 445 /* enable interrupt */ 446 writel( APINT5EN | APINT4EN | APINT3EN | APINT2EN | APINT1EN | 447 APINT0EN | MIIPDTINTEN | MCCIINTEN | MCCINTEN | MREINTEN | 448 SPNDINTEN | MPINTEN | SINTEN | STINTEN, mmio + INTEN0); 449 450 writel(VAL3 | LCINTEN | VAL1 | TINTEN0 | VAL0 | RINTEN0, mmio + INTEN0); 451 452 /* initialize tx and rx ring base addresses */ 453 writel((u32)lp->tx_ring_dma_addr,mmio + XMT_RING_BASE_ADDR0); 454 writel((u32)lp->rx_ring_dma_addr,mmio+ RCV_RING_BASE_ADDR0); 455 456 writew((u32)NUM_TX_RING_DR, mmio + XMT_RING_LEN0); 457 writew((u16)NUM_RX_RING_DR, mmio + RCV_RING_LEN0); 458 459 /* set default IPG to 96 */ 460 writew((u32)DEFAULT_IPG,mmio+IPG); 461 writew((u32)(DEFAULT_IPG-IFS1_DELTA), mmio + IFS1); 462 463 if(lp->options & OPTION_JUMBO_ENABLE){ 464 writel((u32)VAL2|JUMBO, mmio + CMD3); 465 /* Reset REX_UFLO */ 466 writel( REX_UFLO, mmio + CMD2); 467 /* Should not set REX_UFLO for jumbo frames */ 468 writel( VAL0 | APAD_XMT|REX_RTRY , mmio + CMD2); 469 }else{ 470 writel( VAL0 | APAD_XMT | REX_RTRY|REX_UFLO, mmio + CMD2); 471 writel((u32)JUMBO, mmio + CMD3); 472 } 473 474#if AMD8111E_VLAN_TAG_USED 475 writel((u32) VAL2|VSIZE|VL_TAG_DEL, mmio + CMD3); 476#endif 477 writel( VAL0 | APAD_XMT | REX_RTRY, mmio + CMD2 ); 478 479 /* Setting the MAC address to the device */ 480 for (i = 0; i < ETH_ALEN; i++) 481 writeb( dev->dev_addr[i], mmio + PADR + i ); 482 483 /* Enable interrupt coalesce */ 484 if(lp->options & OPTION_INTR_COAL_ENABLE){ 485 netdev_info(dev, "Interrupt Coalescing Enabled.\n"); 486 amd8111e_set_coalesce(dev,ENABLE_COAL); 487 } 488 489 /* set RUN bit to start the chip */ 490 writel(VAL2 | RDMD0, mmio + CMD0); 491 writel(VAL0 | INTREN | RUN, mmio + CMD0); 492 493 /* To avoid PCI posting bug */ 494 readl(mmio+CMD0); 495 return 0; 496} 497 498/* This function clears necessary the device registers. */ 499static void amd8111e_init_hw_default(struct amd8111e_priv *lp) 500{ 501 unsigned int reg_val; 502 unsigned int logic_filter[2] ={0,}; 503 void __iomem *mmio = lp->mmio; 504 505 506 /* stop the chip */ 507 writel(RUN, mmio + CMD0); 508 509 /* AUTOPOLL0 Register *//*TBD default value is 8100 in FPS */ 510 writew( 0x8100 | lp->ext_phy_addr, mmio + AUTOPOLL0); 511 512 /* Clear RCV_RING_BASE_ADDR */ 513 writel(0, mmio + RCV_RING_BASE_ADDR0); 514 515 /* Clear XMT_RING_BASE_ADDR */ 516 writel(0, mmio + XMT_RING_BASE_ADDR0); 517 writel(0, mmio + XMT_RING_BASE_ADDR1); 518 writel(0, mmio + XMT_RING_BASE_ADDR2); 519 writel(0, mmio + XMT_RING_BASE_ADDR3); 520 521 /* Clear CMD0 */ 522 writel(CMD0_CLEAR,mmio + CMD0); 523 524 /* Clear CMD2 */ 525 writel(CMD2_CLEAR, mmio +CMD2); 526 527 /* Clear CMD7 */ 528 writel(CMD7_CLEAR , mmio + CMD7); 529 530 /* Clear DLY_INT_A and DLY_INT_B */ 531 writel(0x0, mmio + DLY_INT_A); 532 writel(0x0, mmio + DLY_INT_B); 533 534 /* Clear FLOW_CONTROL */ 535 writel(0x0, mmio + FLOW_CONTROL); 536 537 /* Clear INT0 write 1 to clear register */ 538 reg_val = readl(mmio + INT0); 539 writel(reg_val, mmio + INT0); 540 541 /* Clear STVAL */ 542 writel(0x0, mmio + STVAL); 543 544 /* Clear INTEN0 */ 545 writel( INTEN0_CLEAR, mmio + INTEN0); 546 547 /* Clear LADRF */ 548 writel(0x0 , mmio + LADRF); 549 550 /* Set SRAM_SIZE & SRAM_BOUNDARY registers */ 551 writel( 0x80010,mmio + SRAM_SIZE); 552 553 /* Clear RCV_RING0_LEN */ 554 writel(0x0, mmio + RCV_RING_LEN0); 555 556 /* Clear XMT_RING0/1/2/3_LEN */ 557 writel(0x0, mmio + XMT_RING_LEN0); 558 writel(0x0, mmio + XMT_RING_LEN1); 559 writel(0x0, mmio + XMT_RING_LEN2); 560 writel(0x0, mmio + XMT_RING_LEN3); 561 562 /* Clear XMT_RING_LIMIT */ 563 writel(0x0, mmio + XMT_RING_LIMIT); 564 565 /* Clear MIB */ 566 writew(MIB_CLEAR, mmio + MIB_ADDR); 567 568 /* Clear LARF */ 569 amd8111e_writeq(*(u64 *)logic_filter, mmio + LADRF); 570 571 /* SRAM_SIZE register */ 572 reg_val = readl(mmio + SRAM_SIZE); 573 574 if(lp->options & OPTION_JUMBO_ENABLE) 575 writel( VAL2|JUMBO, mmio + CMD3); 576#if AMD8111E_VLAN_TAG_USED 577 writel(VAL2|VSIZE|VL_TAG_DEL, mmio + CMD3 ); 578#endif 579 /* Set default value to CTRL1 Register */ 580 writel(CTRL1_DEFAULT, mmio + CTRL1); 581 582 /* To avoid PCI posting bug */ 583 readl(mmio + CMD2); 584 585} 586 587/* This function disables the interrupt and clears all the pending 588 * interrupts in INT0 589 */ 590static void amd8111e_disable_interrupt(struct amd8111e_priv *lp) 591{ 592 u32 intr0; 593 594 /* Disable interrupt */ 595 writel(INTREN, lp->mmio + CMD0); 596 597 /* Clear INT0 */ 598 intr0 = readl(lp->mmio + INT0); 599 writel(intr0, lp->mmio + INT0); 600 601 /* To avoid PCI posting bug */ 602 readl(lp->mmio + INT0); 603 604} 605 606/* This function stops the chip. */ 607static void amd8111e_stop_chip(struct amd8111e_priv *lp) 608{ 609 writel(RUN, lp->mmio + CMD0); 610 611 /* To avoid PCI posting bug */ 612 readl(lp->mmio + CMD0); 613} 614 615/* This function frees the transmiter and receiver descriptor rings. */ 616static void amd8111e_free_ring(struct amd8111e_priv *lp) 617{ 618 /* Free transmit and receive descriptor rings */ 619 if(lp->rx_ring){ 620 dma_free_coherent(&lp->pci_dev->dev, 621 sizeof(struct amd8111e_rx_dr) * NUM_RX_RING_DR, 622 lp->rx_ring, lp->rx_ring_dma_addr); 623 lp->rx_ring = NULL; 624 } 625 626 if(lp->tx_ring){ 627 dma_free_coherent(&lp->pci_dev->dev, 628 sizeof(struct amd8111e_tx_dr) * NUM_TX_RING_DR, 629 lp->tx_ring, lp->tx_ring_dma_addr); 630 631 lp->tx_ring = NULL; 632 } 633 634} 635 636/* This function will free all the transmit skbs that are actually 637 * transmitted by the device. It will check the ownership of the 638 * skb before freeing the skb. 639 */ 640static int amd8111e_tx(struct net_device *dev) 641{ 642 struct amd8111e_priv *lp = netdev_priv(dev); 643 int tx_index; 644 int status; 645 /* Complete all the transmit packet */ 646 while (lp->tx_complete_idx != lp->tx_idx){ 647 tx_index = lp->tx_complete_idx & TX_RING_DR_MOD_MASK; 648 status = le16_to_cpu(lp->tx_ring[tx_index].tx_flags); 649 650 if(status & OWN_BIT) 651 break; /* It still hasn't been Txed */ 652 653 lp->tx_ring[tx_index].buff_phy_addr = 0; 654 655 /* We must free the original skb */ 656 if (lp->tx_skbuff[tx_index]) { 657 dma_unmap_single(&lp->pci_dev->dev, 658 lp->tx_dma_addr[tx_index], 659 lp->tx_skbuff[tx_index]->len, 660 DMA_TO_DEVICE); 661 dev_consume_skb_irq(lp->tx_skbuff[tx_index]); 662 lp->tx_skbuff[tx_index] = NULL; 663 lp->tx_dma_addr[tx_index] = 0; 664 } 665 lp->tx_complete_idx++; 666 /*COAL update tx coalescing parameters */ 667 lp->coal_conf.tx_packets++; 668 lp->coal_conf.tx_bytes += 669 le16_to_cpu(lp->tx_ring[tx_index].buff_count); 670 671 if (netif_queue_stopped(dev) && 672 lp->tx_complete_idx > lp->tx_idx - NUM_TX_BUFFERS +2){ 673 /* The ring is no longer full, clear tbusy. */ 674 /* lp->tx_full = 0; */ 675 netif_wake_queue (dev); 676 } 677 } 678 return 0; 679} 680 681/* This function handles the driver receive operation in polling mode */ 682static int amd8111e_rx_poll(struct napi_struct *napi, int budget) 683{ 684 struct amd8111e_priv *lp = container_of(napi, struct amd8111e_priv, napi); 685 struct net_device *dev = lp->amd8111e_net_dev; 686 int rx_index = lp->rx_idx & RX_RING_DR_MOD_MASK; 687 void __iomem *mmio = lp->mmio; 688 struct sk_buff *skb,*new_skb; 689 int min_pkt_len, status; 690 int num_rx_pkt = 0; 691 short pkt_len; 692#if AMD8111E_VLAN_TAG_USED 693 short vtag; 694#endif 695 696 while (num_rx_pkt < budget) { 697 status = le16_to_cpu(lp->rx_ring[rx_index].rx_flags); 698 if (status & OWN_BIT) 699 break; 700 701 /* There is a tricky error noted by John Murphy, 702 * <murf@perftech.com> to Russ Nelson: Even with 703 * full-sized * buffers it's possible for a 704 * jabber packet to use two buffers, with only 705 * the last correctly noting the error. 706 */ 707 if (status & ERR_BIT) { 708 /* resetting flags */ 709 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS; 710 goto err_next_pkt; 711 } 712 /* check for STP and ENP */ 713 if (!((status & STP_BIT) && (status & ENP_BIT))){ 714 /* resetting flags */ 715 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS; 716 goto err_next_pkt; 717 } 718 pkt_len = le16_to_cpu(lp->rx_ring[rx_index].msg_count) - 4; 719 720#if AMD8111E_VLAN_TAG_USED 721 vtag = status & TT_MASK; 722 /* MAC will strip vlan tag */ 723 if (vtag != 0) 724 min_pkt_len = MIN_PKT_LEN - 4; 725 else 726#endif 727 min_pkt_len = MIN_PKT_LEN; 728 729 if (pkt_len < min_pkt_len) { 730 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS; 731 lp->drv_rx_errors++; 732 goto err_next_pkt; 733 } 734 new_skb = netdev_alloc_skb(dev, lp->rx_buff_len); 735 if (!new_skb) { 736 /* if allocation fail, 737 * ignore that pkt and go to next one 738 */ 739 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS; 740 lp->drv_rx_errors++; 741 goto err_next_pkt; 742 } 743 744 skb_reserve(new_skb, 2); 745 skb = lp->rx_skbuff[rx_index]; 746 dma_unmap_single(&lp->pci_dev->dev, lp->rx_dma_addr[rx_index], 747 lp->rx_buff_len - 2, DMA_FROM_DEVICE); 748 skb_put(skb, pkt_len); 749 lp->rx_skbuff[rx_index] = new_skb; 750 lp->rx_dma_addr[rx_index] = dma_map_single(&lp->pci_dev->dev, 751 new_skb->data, 752 lp->rx_buff_len - 2, 753 DMA_FROM_DEVICE); 754 755 skb->protocol = eth_type_trans(skb, dev); 756 757#if AMD8111E_VLAN_TAG_USED 758 if (vtag == TT_VLAN_TAGGED){ 759 u16 vlan_tag = le16_to_cpu(lp->rx_ring[rx_index].tag_ctrl_info); 760 __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tag); 761 } 762#endif 763 napi_gro_receive(napi, skb); 764 /* COAL update rx coalescing parameters */ 765 lp->coal_conf.rx_packets++; 766 lp->coal_conf.rx_bytes += pkt_len; 767 num_rx_pkt++; 768 769err_next_pkt: 770 lp->rx_ring[rx_index].buff_phy_addr 771 = cpu_to_le32(lp->rx_dma_addr[rx_index]); 772 lp->rx_ring[rx_index].buff_count = 773 cpu_to_le16(lp->rx_buff_len-2); 774 wmb(); 775 lp->rx_ring[rx_index].rx_flags |= cpu_to_le16(OWN_BIT); 776 rx_index = (++lp->rx_idx) & RX_RING_DR_MOD_MASK; 777 } 778 779 if (num_rx_pkt < budget && napi_complete_done(napi, num_rx_pkt)) { 780 unsigned long flags; 781 782 /* Receive descriptor is empty now */ 783 spin_lock_irqsave(&lp->lock, flags); 784 writel(VAL0|RINTEN0, mmio + INTEN0); 785 writel(VAL2 | RDMD0, mmio + CMD0); 786 spin_unlock_irqrestore(&lp->lock, flags); 787 } 788 789 return num_rx_pkt; 790} 791 792/* This function will indicate the link status to the kernel. */ 793static int amd8111e_link_change(struct net_device *dev) 794{ 795 struct amd8111e_priv *lp = netdev_priv(dev); 796 int status0,speed; 797 798 /* read the link change */ 799 status0 = readl(lp->mmio + STAT0); 800 801 if(status0 & LINK_STATS){ 802 if(status0 & AUTONEG_COMPLETE) 803 lp->link_config.autoneg = AUTONEG_ENABLE; 804 else 805 lp->link_config.autoneg = AUTONEG_DISABLE; 806 807 if(status0 & FULL_DPLX) 808 lp->link_config.duplex = DUPLEX_FULL; 809 else 810 lp->link_config.duplex = DUPLEX_HALF; 811 speed = (status0 & SPEED_MASK) >> 7; 812 if(speed == PHY_SPEED_10) 813 lp->link_config.speed = SPEED_10; 814 else if(speed == PHY_SPEED_100) 815 lp->link_config.speed = SPEED_100; 816 817 netdev_info(dev, "Link is Up. Speed is %s Mbps %s Duplex\n", 818 (lp->link_config.speed == SPEED_100) ? 819 "100" : "10", 820 (lp->link_config.duplex == DUPLEX_FULL) ? 821 "Full" : "Half"); 822 823 netif_carrier_on(dev); 824 } 825 else{ 826 lp->link_config.speed = SPEED_INVALID; 827 lp->link_config.duplex = DUPLEX_INVALID; 828 lp->link_config.autoneg = AUTONEG_INVALID; 829 netdev_info(dev, "Link is Down.\n"); 830 netif_carrier_off(dev); 831 } 832 833 return 0; 834} 835 836/* This function reads the mib counters. */ 837static int amd8111e_read_mib(void __iomem *mmio, u8 MIB_COUNTER) 838{ 839 unsigned int status; 840 unsigned int data; 841 unsigned int repeat = REPEAT_CNT; 842 843 writew( MIB_RD_CMD | MIB_COUNTER, mmio + MIB_ADDR); 844 do { 845 status = readw(mmio + MIB_ADDR); 846 udelay(2); /* controller takes MAX 2 us to get mib data */ 847 } 848 while (--repeat && (status & MIB_CMD_ACTIVE)); 849 850 data = readl(mmio + MIB_DATA); 851 return data; 852} 853 854/* This function reads the mib registers and returns the hardware statistics. 855 * It updates previous internal driver statistics with new values. 856 */ 857static struct net_device_stats *amd8111e_get_stats(struct net_device *dev) 858{ 859 struct amd8111e_priv *lp = netdev_priv(dev); 860 void __iomem *mmio = lp->mmio; 861 unsigned long flags; 862 struct net_device_stats *new_stats = &dev->stats; 863 864 if (!lp->opened) 865 return new_stats; 866 spin_lock_irqsave (&lp->lock, flags); 867 868 /* stats.rx_packets */ 869 new_stats->rx_packets = amd8111e_read_mib(mmio, rcv_broadcast_pkts)+ 870 amd8111e_read_mib(mmio, rcv_multicast_pkts)+ 871 amd8111e_read_mib(mmio, rcv_unicast_pkts); 872 873 /* stats.tx_packets */ 874 new_stats->tx_packets = amd8111e_read_mib(mmio, xmt_packets); 875 876 /*stats.rx_bytes */ 877 new_stats->rx_bytes = amd8111e_read_mib(mmio, rcv_octets); 878 879 /* stats.tx_bytes */ 880 new_stats->tx_bytes = amd8111e_read_mib(mmio, xmt_octets); 881 882 /* stats.rx_errors */ 883 /* hw errors + errors driver reported */ 884 new_stats->rx_errors = amd8111e_read_mib(mmio, rcv_undersize_pkts)+ 885 amd8111e_read_mib(mmio, rcv_fragments)+ 886 amd8111e_read_mib(mmio, rcv_jabbers)+ 887 amd8111e_read_mib(mmio, rcv_alignment_errors)+ 888 amd8111e_read_mib(mmio, rcv_fcs_errors)+ 889 amd8111e_read_mib(mmio, rcv_miss_pkts)+ 890 lp->drv_rx_errors; 891 892 /* stats.tx_errors */ 893 new_stats->tx_errors = amd8111e_read_mib(mmio, xmt_underrun_pkts); 894 895 /* stats.rx_dropped*/ 896 new_stats->rx_dropped = amd8111e_read_mib(mmio, rcv_miss_pkts); 897 898 /* stats.tx_dropped*/ 899 new_stats->tx_dropped = amd8111e_read_mib(mmio, xmt_underrun_pkts); 900 901 /* stats.multicast*/ 902 new_stats->multicast = amd8111e_read_mib(mmio, rcv_multicast_pkts); 903 904 /* stats.collisions*/ 905 new_stats->collisions = amd8111e_read_mib(mmio, xmt_collisions); 906 907 /* stats.rx_length_errors*/ 908 new_stats->rx_length_errors = 909 amd8111e_read_mib(mmio, rcv_undersize_pkts)+ 910 amd8111e_read_mib(mmio, rcv_oversize_pkts); 911 912 /* stats.rx_over_errors*/ 913 new_stats->rx_over_errors = amd8111e_read_mib(mmio, rcv_miss_pkts); 914 915 /* stats.rx_crc_errors*/ 916 new_stats->rx_crc_errors = amd8111e_read_mib(mmio, rcv_fcs_errors); 917 918 /* stats.rx_frame_errors*/ 919 new_stats->rx_frame_errors = 920 amd8111e_read_mib(mmio, rcv_alignment_errors); 921 922 /* stats.rx_fifo_errors */ 923 new_stats->rx_fifo_errors = amd8111e_read_mib(mmio, rcv_miss_pkts); 924 925 /* stats.rx_missed_errors */ 926 new_stats->rx_missed_errors = amd8111e_read_mib(mmio, rcv_miss_pkts); 927 928 /* stats.tx_aborted_errors*/ 929 new_stats->tx_aborted_errors = 930 amd8111e_read_mib(mmio, xmt_excessive_collision); 931 932 /* stats.tx_carrier_errors*/ 933 new_stats->tx_carrier_errors = 934 amd8111e_read_mib(mmio, xmt_loss_carrier); 935 936 /* stats.tx_fifo_errors*/ 937 new_stats->tx_fifo_errors = amd8111e_read_mib(mmio, xmt_underrun_pkts); 938 939 /* stats.tx_window_errors*/ 940 new_stats->tx_window_errors = 941 amd8111e_read_mib(mmio, xmt_late_collision); 942 943 /* Reset the mibs for collecting new statistics */ 944 /* writew(MIB_CLEAR, mmio + MIB_ADDR);*/ 945 946 spin_unlock_irqrestore (&lp->lock, flags); 947 948 return new_stats; 949} 950 951/* This function recalculate the interrupt coalescing mode on every interrupt 952 * according to the datarate and the packet rate. 953 */ 954static int amd8111e_calc_coalesce(struct net_device *dev) 955{ 956 struct amd8111e_priv *lp = netdev_priv(dev); 957 struct amd8111e_coalesce_conf *coal_conf = &lp->coal_conf; 958 int tx_pkt_rate; 959 int rx_pkt_rate; 960 int tx_data_rate; 961 int rx_data_rate; 962 int rx_pkt_size; 963 int tx_pkt_size; 964 965 tx_pkt_rate = coal_conf->tx_packets - coal_conf->tx_prev_packets; 966 coal_conf->tx_prev_packets = coal_conf->tx_packets; 967 968 tx_data_rate = coal_conf->tx_bytes - coal_conf->tx_prev_bytes; 969 coal_conf->tx_prev_bytes = coal_conf->tx_bytes; 970 971 rx_pkt_rate = coal_conf->rx_packets - coal_conf->rx_prev_packets; 972 coal_conf->rx_prev_packets = coal_conf->rx_packets; 973 974 rx_data_rate = coal_conf->rx_bytes - coal_conf->rx_prev_bytes; 975 coal_conf->rx_prev_bytes = coal_conf->rx_bytes; 976 977 if(rx_pkt_rate < 800){ 978 if(coal_conf->rx_coal_type != NO_COALESCE){ 979 980 coal_conf->rx_timeout = 0x0; 981 coal_conf->rx_event_count = 0; 982 amd8111e_set_coalesce(dev,RX_INTR_COAL); 983 coal_conf->rx_coal_type = NO_COALESCE; 984 } 985 } 986 else{ 987 988 rx_pkt_size = rx_data_rate/rx_pkt_rate; 989 if (rx_pkt_size < 128){ 990 if(coal_conf->rx_coal_type != NO_COALESCE){ 991 992 coal_conf->rx_timeout = 0; 993 coal_conf->rx_event_count = 0; 994 amd8111e_set_coalesce(dev,RX_INTR_COAL); 995 coal_conf->rx_coal_type = NO_COALESCE; 996 } 997 998 } 999 else if ( (rx_pkt_size >= 128) && (rx_pkt_size < 512) ){ 1000 1001 if(coal_conf->rx_coal_type != LOW_COALESCE){ 1002 coal_conf->rx_timeout = 1; 1003 coal_conf->rx_event_count = 4; 1004 amd8111e_set_coalesce(dev,RX_INTR_COAL); 1005 coal_conf->rx_coal_type = LOW_COALESCE; 1006 } 1007 } 1008 else if ((rx_pkt_size >= 512) && (rx_pkt_size < 1024)){ 1009 1010 if(coal_conf->rx_coal_type != MEDIUM_COALESCE){ 1011 coal_conf->rx_timeout = 1; 1012 coal_conf->rx_event_count = 4; 1013 amd8111e_set_coalesce(dev,RX_INTR_COAL); 1014 coal_conf->rx_coal_type = MEDIUM_COALESCE; 1015 } 1016 1017 } 1018 else if(rx_pkt_size >= 1024){ 1019 if(coal_conf->rx_coal_type != HIGH_COALESCE){ 1020 coal_conf->rx_timeout = 2; 1021 coal_conf->rx_event_count = 3; 1022 amd8111e_set_coalesce(dev,RX_INTR_COAL); 1023 coal_conf->rx_coal_type = HIGH_COALESCE; 1024 } 1025 } 1026 } 1027 /* NOW FOR TX INTR COALESC */ 1028 if(tx_pkt_rate < 800){ 1029 if(coal_conf->tx_coal_type != NO_COALESCE){ 1030 1031 coal_conf->tx_timeout = 0x0; 1032 coal_conf->tx_event_count = 0; 1033 amd8111e_set_coalesce(dev,TX_INTR_COAL); 1034 coal_conf->tx_coal_type = NO_COALESCE; 1035 } 1036 } 1037 else{ 1038 1039 tx_pkt_size = tx_data_rate/tx_pkt_rate; 1040 if (tx_pkt_size < 128){ 1041 1042 if(coal_conf->tx_coal_type != NO_COALESCE){ 1043 1044 coal_conf->tx_timeout = 0; 1045 coal_conf->tx_event_count = 0; 1046 amd8111e_set_coalesce(dev,TX_INTR_COAL); 1047 coal_conf->tx_coal_type = NO_COALESCE; 1048 } 1049 1050 } 1051 else if ( (tx_pkt_size >= 128) && (tx_pkt_size < 512) ){ 1052 1053 if(coal_conf->tx_coal_type != LOW_COALESCE){ 1054 coal_conf->tx_timeout = 1; 1055 coal_conf->tx_event_count = 2; 1056 amd8111e_set_coalesce(dev,TX_INTR_COAL); 1057 coal_conf->tx_coal_type = LOW_COALESCE; 1058 1059 } 1060 } 1061 else if ((tx_pkt_size >= 512) && (tx_pkt_size < 1024)){ 1062 1063 if(coal_conf->tx_coal_type != MEDIUM_COALESCE){ 1064 coal_conf->tx_timeout = 2; 1065 coal_conf->tx_event_count = 5; 1066 amd8111e_set_coalesce(dev,TX_INTR_COAL); 1067 coal_conf->tx_coal_type = MEDIUM_COALESCE; 1068 } 1069 } else if (tx_pkt_size >= 1024) { 1070 if (coal_conf->tx_coal_type != HIGH_COALESCE) { 1071 coal_conf->tx_timeout = 4; 1072 coal_conf->tx_event_count = 8; 1073 amd8111e_set_coalesce(dev, TX_INTR_COAL); 1074 coal_conf->tx_coal_type = HIGH_COALESCE; 1075 } 1076 } 1077 } 1078 return 0; 1079 1080} 1081 1082/* This is device interrupt function. It handles transmit, 1083 * receive,link change and hardware timer interrupts. 1084 */ 1085static irqreturn_t amd8111e_interrupt(int irq, void *dev_id) 1086{ 1087 1088 struct net_device *dev = (struct net_device *)dev_id; 1089 struct amd8111e_priv *lp = netdev_priv(dev); 1090 void __iomem *mmio = lp->mmio; 1091 unsigned int intr0, intren0; 1092 unsigned int handled = 1; 1093 1094 if(unlikely(dev == NULL)) 1095 return IRQ_NONE; 1096 1097 spin_lock(&lp->lock); 1098 1099 /* disabling interrupt */ 1100 writel(INTREN, mmio + CMD0); 1101 1102 /* Read interrupt status */ 1103 intr0 = readl(mmio + INT0); 1104 intren0 = readl(mmio + INTEN0); 1105 1106 /* Process all the INT event until INTR bit is clear. */ 1107 1108 if (!(intr0 & INTR)){ 1109 handled = 0; 1110 goto err_no_interrupt; 1111 } 1112 1113 /* Current driver processes 4 interrupts : RINT,TINT,LCINT,STINT */ 1114 writel(intr0, mmio + INT0); 1115 1116 /* Check if Receive Interrupt has occurred. */ 1117 if (intr0 & RINT0) { 1118 if (napi_schedule_prep(&lp->napi)) { 1119 /* Disable receive interupts */ 1120 writel(RINTEN0, mmio + INTEN0); 1121 /* Schedule a polling routine */ 1122 __napi_schedule(&lp->napi); 1123 } else if (intren0 & RINTEN0) { 1124 netdev_dbg(dev, "************Driver bug! interrupt while in poll\n"); 1125 /* Fix by disable receive interrupts */ 1126 writel(RINTEN0, mmio + INTEN0); 1127 } 1128 } 1129 1130 /* Check if Transmit Interrupt has occurred. */ 1131 if (intr0 & TINT0) 1132 amd8111e_tx(dev); 1133 1134 /* Check if Link Change Interrupt has occurred. */ 1135 if (intr0 & LCINT) 1136 amd8111e_link_change(dev); 1137 1138 /* Check if Hardware Timer Interrupt has occurred. */ 1139 if (intr0 & STINT) 1140 amd8111e_calc_coalesce(dev); 1141 1142err_no_interrupt: 1143 writel( VAL0 | INTREN,mmio + CMD0); 1144 1145 spin_unlock(&lp->lock); 1146 1147 return IRQ_RETVAL(handled); 1148} 1149 1150#ifdef CONFIG_NET_POLL_CONTROLLER 1151static void amd8111e_poll(struct net_device *dev) 1152{ 1153 unsigned long flags; 1154 local_irq_save(flags); 1155 amd8111e_interrupt(0, dev); 1156 local_irq_restore(flags); 1157} 1158#endif 1159 1160 1161/* This function closes the network interface and updates 1162 * the statistics so that most recent statistics will be 1163 * available after the interface is down. 1164 */ 1165static int amd8111e_close(struct net_device *dev) 1166{ 1167 struct amd8111e_priv *lp = netdev_priv(dev); 1168 netif_stop_queue(dev); 1169 1170 napi_disable(&lp->napi); 1171 1172 spin_lock_irq(&lp->lock); 1173 1174 amd8111e_disable_interrupt(lp); 1175 amd8111e_stop_chip(lp); 1176 1177 /* Free transmit and receive skbs */ 1178 amd8111e_free_skbs(lp->amd8111e_net_dev); 1179 1180 netif_carrier_off(lp->amd8111e_net_dev); 1181 1182 /* Delete ipg timer */ 1183 if(lp->options & OPTION_DYN_IPG_ENABLE) 1184 del_timer_sync(&lp->ipg_data.ipg_timer); 1185 1186 spin_unlock_irq(&lp->lock); 1187 free_irq(dev->irq, dev); 1188 amd8111e_free_ring(lp); 1189 1190 /* Update the statistics before closing */ 1191 amd8111e_get_stats(dev); 1192 lp->opened = 0; 1193 return 0; 1194} 1195 1196/* This function opens new interface.It requests irq for the device, 1197 * initializes the device,buffers and descriptors, and starts the device. 1198 */ 1199static int amd8111e_open(struct net_device *dev) 1200{ 1201 struct amd8111e_priv *lp = netdev_priv(dev); 1202 1203 if(dev->irq ==0 || request_irq(dev->irq, amd8111e_interrupt, IRQF_SHARED, 1204 dev->name, dev)) 1205 return -EAGAIN; 1206 1207 napi_enable(&lp->napi); 1208 1209 spin_lock_irq(&lp->lock); 1210 1211 amd8111e_init_hw_default(lp); 1212 1213 if(amd8111e_restart(dev)){ 1214 spin_unlock_irq(&lp->lock); 1215 napi_disable(&lp->napi); 1216 if (dev->irq) 1217 free_irq(dev->irq, dev); 1218 return -ENOMEM; 1219 } 1220 /* Start ipg timer */ 1221 if(lp->options & OPTION_DYN_IPG_ENABLE){ 1222 add_timer(&lp->ipg_data.ipg_timer); 1223 netdev_info(dev, "Dynamic IPG Enabled\n"); 1224 } 1225 1226 lp->opened = 1; 1227 1228 spin_unlock_irq(&lp->lock); 1229 1230 netif_start_queue(dev); 1231 1232 return 0; 1233} 1234 1235/* This function checks if there is any transmit descriptors 1236 * available to queue more packet. 1237 */ 1238static int amd8111e_tx_queue_avail(struct amd8111e_priv *lp) 1239{ 1240 int tx_index = lp->tx_idx & TX_BUFF_MOD_MASK; 1241 if (lp->tx_skbuff[tx_index]) 1242 return -1; 1243 else 1244 return 0; 1245 1246} 1247 1248/* This function will queue the transmit packets to the 1249 * descriptors and will trigger the send operation. It also 1250 * initializes the transmit descriptors with buffer physical address, 1251 * byte count, ownership to hardware etc. 1252 */ 1253static netdev_tx_t amd8111e_start_xmit(struct sk_buff *skb, 1254 struct net_device *dev) 1255{ 1256 struct amd8111e_priv *lp = netdev_priv(dev); 1257 int tx_index; 1258 unsigned long flags; 1259 1260 spin_lock_irqsave(&lp->lock, flags); 1261 1262 tx_index = lp->tx_idx & TX_RING_DR_MOD_MASK; 1263 1264 lp->tx_ring[tx_index].buff_count = cpu_to_le16(skb->len); 1265 1266 lp->tx_skbuff[tx_index] = skb; 1267 lp->tx_ring[tx_index].tx_flags = 0; 1268 1269#if AMD8111E_VLAN_TAG_USED 1270 if (skb_vlan_tag_present(skb)) { 1271 lp->tx_ring[tx_index].tag_ctrl_cmd |= 1272 cpu_to_le16(TCC_VLAN_INSERT); 1273 lp->tx_ring[tx_index].tag_ctrl_info = 1274 cpu_to_le16(skb_vlan_tag_get(skb)); 1275 1276 } 1277#endif 1278 lp->tx_dma_addr[tx_index] = 1279 dma_map_single(&lp->pci_dev->dev, skb->data, skb->len, 1280 DMA_TO_DEVICE); 1281 lp->tx_ring[tx_index].buff_phy_addr = 1282 cpu_to_le32(lp->tx_dma_addr[tx_index]); 1283 1284 /* Set FCS and LTINT bits */ 1285 wmb(); 1286 lp->tx_ring[tx_index].tx_flags |= 1287 cpu_to_le16(OWN_BIT | STP_BIT | ENP_BIT|ADD_FCS_BIT|LTINT_BIT); 1288 1289 lp->tx_idx++; 1290 1291 /* Trigger an immediate send poll. */ 1292 writel( VAL1 | TDMD0, lp->mmio + CMD0); 1293 writel( VAL2 | RDMD0,lp->mmio + CMD0); 1294 1295 if(amd8111e_tx_queue_avail(lp) < 0){ 1296 netif_stop_queue(dev); 1297 } 1298 spin_unlock_irqrestore(&lp->lock, flags); 1299 return NETDEV_TX_OK; 1300} 1301/* This function returns all the memory mapped registers of the device. */ 1302static void amd8111e_read_regs(struct amd8111e_priv *lp, u32 *buf) 1303{ 1304 void __iomem *mmio = lp->mmio; 1305 /* Read only necessary registers */ 1306 buf[0] = readl(mmio + XMT_RING_BASE_ADDR0); 1307 buf[1] = readl(mmio + XMT_RING_LEN0); 1308 buf[2] = readl(mmio + RCV_RING_BASE_ADDR0); 1309 buf[3] = readl(mmio + RCV_RING_LEN0); 1310 buf[4] = readl(mmio + CMD0); 1311 buf[5] = readl(mmio + CMD2); 1312 buf[6] = readl(mmio + CMD3); 1313 buf[7] = readl(mmio + CMD7); 1314 buf[8] = readl(mmio + INT0); 1315 buf[9] = readl(mmio + INTEN0); 1316 buf[10] = readl(mmio + LADRF); 1317 buf[11] = readl(mmio + LADRF+4); 1318 buf[12] = readl(mmio + STAT0); 1319} 1320 1321 1322/* This function sets promiscuos mode, all-multi mode or the multicast address 1323 * list to the device. 1324 */ 1325static void amd8111e_set_multicast_list(struct net_device *dev) 1326{ 1327 struct netdev_hw_addr *ha; 1328 struct amd8111e_priv *lp = netdev_priv(dev); 1329 u32 mc_filter[2] ; 1330 int bit_num; 1331 1332 if(dev->flags & IFF_PROMISC){ 1333 writel( VAL2 | PROM, lp->mmio + CMD2); 1334 return; 1335 } 1336 else 1337 writel( PROM, lp->mmio + CMD2); 1338 if (dev->flags & IFF_ALLMULTI || 1339 netdev_mc_count(dev) > MAX_FILTER_SIZE) { 1340 /* get all multicast packet */ 1341 mc_filter[1] = mc_filter[0] = 0xffffffff; 1342 lp->options |= OPTION_MULTICAST_ENABLE; 1343 amd8111e_writeq(*(u64 *)mc_filter, lp->mmio + LADRF); 1344 return; 1345 } 1346 if (netdev_mc_empty(dev)) { 1347 /* get only own packets */ 1348 mc_filter[1] = mc_filter[0] = 0; 1349 lp->options &= ~OPTION_MULTICAST_ENABLE; 1350 amd8111e_writeq(*(u64 *)mc_filter, lp->mmio + LADRF); 1351 /* disable promiscuous mode */ 1352 writel(PROM, lp->mmio + CMD2); 1353 return; 1354 } 1355 /* load all the multicast addresses in the logic filter */ 1356 lp->options |= OPTION_MULTICAST_ENABLE; 1357 mc_filter[1] = mc_filter[0] = 0; 1358 netdev_for_each_mc_addr(ha, dev) { 1359 bit_num = (ether_crc_le(ETH_ALEN, ha->addr) >> 26) & 0x3f; 1360 mc_filter[bit_num >> 5] |= 1 << (bit_num & 31); 1361 } 1362 amd8111e_writeq(*(u64 *)mc_filter, lp->mmio + LADRF); 1363 1364 /* To eliminate PCI posting bug */ 1365 readl(lp->mmio + CMD2); 1366 1367} 1368 1369static void amd8111e_get_drvinfo(struct net_device *dev, 1370 struct ethtool_drvinfo *info) 1371{ 1372 struct amd8111e_priv *lp = netdev_priv(dev); 1373 struct pci_dev *pci_dev = lp->pci_dev; 1374 strlcpy(info->driver, MODULE_NAME, sizeof(info->driver)); 1375 snprintf(info->fw_version, sizeof(info->fw_version), 1376 "%u", chip_version); 1377 strlcpy(info->bus_info, pci_name(pci_dev), sizeof(info->bus_info)); 1378} 1379 1380static int amd8111e_get_regs_len(struct net_device *dev) 1381{ 1382 return AMD8111E_REG_DUMP_LEN; 1383} 1384 1385static void amd8111e_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *buf) 1386{ 1387 struct amd8111e_priv *lp = netdev_priv(dev); 1388 regs->version = 0; 1389 amd8111e_read_regs(lp, buf); 1390} 1391 1392static int amd8111e_get_link_ksettings(struct net_device *dev, 1393 struct ethtool_link_ksettings *cmd) 1394{ 1395 struct amd8111e_priv *lp = netdev_priv(dev); 1396 spin_lock_irq(&lp->lock); 1397 mii_ethtool_get_link_ksettings(&lp->mii_if, cmd); 1398 spin_unlock_irq(&lp->lock); 1399 return 0; 1400} 1401 1402static int amd8111e_set_link_ksettings(struct net_device *dev, 1403 const struct ethtool_link_ksettings *cmd) 1404{ 1405 struct amd8111e_priv *lp = netdev_priv(dev); 1406 int res; 1407 spin_lock_irq(&lp->lock); 1408 res = mii_ethtool_set_link_ksettings(&lp->mii_if, cmd); 1409 spin_unlock_irq(&lp->lock); 1410 return res; 1411} 1412 1413static int amd8111e_nway_reset(struct net_device *dev) 1414{ 1415 struct amd8111e_priv *lp = netdev_priv(dev); 1416 return mii_nway_restart(&lp->mii_if); 1417} 1418 1419static u32 amd8111e_get_link(struct net_device *dev) 1420{ 1421 struct amd8111e_priv *lp = netdev_priv(dev); 1422 return mii_link_ok(&lp->mii_if); 1423} 1424 1425static void amd8111e_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol_info) 1426{ 1427 struct amd8111e_priv *lp = netdev_priv(dev); 1428 wol_info->supported = WAKE_MAGIC|WAKE_PHY; 1429 if (lp->options & OPTION_WOL_ENABLE) 1430 wol_info->wolopts = WAKE_MAGIC; 1431} 1432 1433static int amd8111e_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol_info) 1434{ 1435 struct amd8111e_priv *lp = netdev_priv(dev); 1436 if (wol_info->wolopts & ~(WAKE_MAGIC|WAKE_PHY)) 1437 return -EINVAL; 1438 spin_lock_irq(&lp->lock); 1439 if (wol_info->wolopts & WAKE_MAGIC) 1440 lp->options |= 1441 (OPTION_WOL_ENABLE | OPTION_WAKE_MAGIC_ENABLE); 1442 else if(wol_info->wolopts & WAKE_PHY) 1443 lp->options |= 1444 (OPTION_WOL_ENABLE | OPTION_WAKE_PHY_ENABLE); 1445 else 1446 lp->options &= ~OPTION_WOL_ENABLE; 1447 spin_unlock_irq(&lp->lock); 1448 return 0; 1449} 1450 1451static const struct ethtool_ops ops = { 1452 .get_drvinfo = amd8111e_get_drvinfo, 1453 .get_regs_len = amd8111e_get_regs_len, 1454 .get_regs = amd8111e_get_regs, 1455 .nway_reset = amd8111e_nway_reset, 1456 .get_link = amd8111e_get_link, 1457 .get_wol = amd8111e_get_wol, 1458 .set_wol = amd8111e_set_wol, 1459 .get_link_ksettings = amd8111e_get_link_ksettings, 1460 .set_link_ksettings = amd8111e_set_link_ksettings, 1461}; 1462 1463/* This function handles all the ethtool ioctls. It gives driver info, 1464 * gets/sets driver speed, gets memory mapped register values, forces 1465 * auto negotiation, sets/gets WOL options for ethtool application. 1466 */ 1467static int amd8111e_ioctl(struct net_device *dev , struct ifreq *ifr, int cmd) 1468{ 1469 struct mii_ioctl_data *data = if_mii(ifr); 1470 struct amd8111e_priv *lp = netdev_priv(dev); 1471 int err; 1472 u32 mii_regval; 1473 1474 switch(cmd) { 1475 case SIOCGMIIPHY: 1476 data->phy_id = lp->ext_phy_addr; 1477 1478 fallthrough; 1479 case SIOCGMIIREG: 1480 1481 spin_lock_irq(&lp->lock); 1482 err = amd8111e_read_phy(lp, data->phy_id, 1483 data->reg_num & PHY_REG_ADDR_MASK, &mii_regval); 1484 spin_unlock_irq(&lp->lock); 1485 1486 data->val_out = mii_regval; 1487 return err; 1488 1489 case SIOCSMIIREG: 1490 1491 spin_lock_irq(&lp->lock); 1492 err = amd8111e_write_phy(lp, data->phy_id, 1493 data->reg_num & PHY_REG_ADDR_MASK, data->val_in); 1494 spin_unlock_irq(&lp->lock); 1495 1496 return err; 1497 1498 default: 1499 /* do nothing */ 1500 break; 1501 } 1502 return -EOPNOTSUPP; 1503} 1504static int amd8111e_set_mac_address(struct net_device *dev, void *p) 1505{ 1506 struct amd8111e_priv *lp = netdev_priv(dev); 1507 int i; 1508 struct sockaddr *addr = p; 1509 1510 memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); 1511 spin_lock_irq(&lp->lock); 1512 /* Setting the MAC address to the device */ 1513 for (i = 0; i < ETH_ALEN; i++) 1514 writeb( dev->dev_addr[i], lp->mmio + PADR + i ); 1515 1516 spin_unlock_irq(&lp->lock); 1517 1518 return 0; 1519} 1520 1521/* This function changes the mtu of the device. It restarts the device to 1522 * initialize the descriptor with new receive buffers. 1523 */ 1524static int amd8111e_change_mtu(struct net_device *dev, int new_mtu) 1525{ 1526 struct amd8111e_priv *lp = netdev_priv(dev); 1527 int err; 1528 1529 if (!netif_running(dev)) { 1530 /* new_mtu will be used 1531 * when device starts netxt time 1532 */ 1533 dev->mtu = new_mtu; 1534 return 0; 1535 } 1536 1537 spin_lock_irq(&lp->lock); 1538 1539 /* stop the chip */ 1540 writel(RUN, lp->mmio + CMD0); 1541 1542 dev->mtu = new_mtu; 1543 1544 err = amd8111e_restart(dev); 1545 spin_unlock_irq(&lp->lock); 1546 if(!err) 1547 netif_start_queue(dev); 1548 return err; 1549} 1550 1551static int amd8111e_enable_magicpkt(struct amd8111e_priv *lp) 1552{ 1553 writel( VAL1|MPPLBA, lp->mmio + CMD3); 1554 writel( VAL0|MPEN_SW, lp->mmio + CMD7); 1555 1556 /* To eliminate PCI posting bug */ 1557 readl(lp->mmio + CMD7); 1558 return 0; 1559} 1560 1561static int amd8111e_enable_link_change(struct amd8111e_priv *lp) 1562{ 1563 1564 /* Adapter is already stoped/suspended/interrupt-disabled */ 1565 writel(VAL0|LCMODE_SW,lp->mmio + CMD7); 1566 1567 /* To eliminate PCI posting bug */ 1568 readl(lp->mmio + CMD7); 1569 return 0; 1570} 1571 1572/* This function is called when a packet transmission fails to complete 1573 * within a reasonable period, on the assumption that an interrupt have 1574 * failed or the interface is locked up. This function will reinitialize 1575 * the hardware. 1576 */ 1577static void amd8111e_tx_timeout(struct net_device *dev, unsigned int txqueue) 1578{ 1579 struct amd8111e_priv *lp = netdev_priv(dev); 1580 int err; 1581 1582 netdev_err(dev, "transmit timed out, resetting\n"); 1583 1584 spin_lock_irq(&lp->lock); 1585 err = amd8111e_restart(dev); 1586 spin_unlock_irq(&lp->lock); 1587 if(!err) 1588 netif_wake_queue(dev); 1589} 1590 1591static int __maybe_unused amd8111e_suspend(struct device *dev_d) 1592{ 1593 struct net_device *dev = dev_get_drvdata(dev_d); 1594 struct amd8111e_priv *lp = netdev_priv(dev); 1595 1596 if (!netif_running(dev)) 1597 return 0; 1598 1599 /* disable the interrupt */ 1600 spin_lock_irq(&lp->lock); 1601 amd8111e_disable_interrupt(lp); 1602 spin_unlock_irq(&lp->lock); 1603 1604 netif_device_detach(dev); 1605 1606 /* stop chip */ 1607 spin_lock_irq(&lp->lock); 1608 if(lp->options & OPTION_DYN_IPG_ENABLE) 1609 del_timer_sync(&lp->ipg_data.ipg_timer); 1610 amd8111e_stop_chip(lp); 1611 spin_unlock_irq(&lp->lock); 1612 1613 if(lp->options & OPTION_WOL_ENABLE){ 1614 /* enable wol */ 1615 if(lp->options & OPTION_WAKE_MAGIC_ENABLE) 1616 amd8111e_enable_magicpkt(lp); 1617 if(lp->options & OPTION_WAKE_PHY_ENABLE) 1618 amd8111e_enable_link_change(lp); 1619 1620 device_set_wakeup_enable(dev_d, 1); 1621 1622 } 1623 else{ 1624 device_set_wakeup_enable(dev_d, 0); 1625 } 1626 1627 return 0; 1628} 1629 1630static int __maybe_unused amd8111e_resume(struct device *dev_d) 1631{ 1632 struct net_device *dev = dev_get_drvdata(dev_d); 1633 struct amd8111e_priv *lp = netdev_priv(dev); 1634 1635 if (!netif_running(dev)) 1636 return 0; 1637 1638 netif_device_attach(dev); 1639 1640 spin_lock_irq(&lp->lock); 1641 amd8111e_restart(dev); 1642 /* Restart ipg timer */ 1643 if(lp->options & OPTION_DYN_IPG_ENABLE) 1644 mod_timer(&lp->ipg_data.ipg_timer, 1645 jiffies + IPG_CONVERGE_JIFFIES); 1646 spin_unlock_irq(&lp->lock); 1647 1648 return 0; 1649} 1650 1651static void amd8111e_config_ipg(struct timer_list *t) 1652{ 1653 struct amd8111e_priv *lp = from_timer(lp, t, ipg_data.ipg_timer); 1654 struct ipg_info *ipg_data = &lp->ipg_data; 1655 void __iomem *mmio = lp->mmio; 1656 unsigned int prev_col_cnt = ipg_data->col_cnt; 1657 unsigned int total_col_cnt; 1658 unsigned int tmp_ipg; 1659 1660 if(lp->link_config.duplex == DUPLEX_FULL){ 1661 ipg_data->ipg = DEFAULT_IPG; 1662 return; 1663 } 1664 1665 if(ipg_data->ipg_state == SSTATE){ 1666 1667 if(ipg_data->timer_tick == IPG_STABLE_TIME){ 1668 1669 ipg_data->timer_tick = 0; 1670 ipg_data->ipg = MIN_IPG - IPG_STEP; 1671 ipg_data->current_ipg = MIN_IPG; 1672 ipg_data->diff_col_cnt = 0xFFFFFFFF; 1673 ipg_data->ipg_state = CSTATE; 1674 } 1675 else 1676 ipg_data->timer_tick++; 1677 } 1678 1679 if(ipg_data->ipg_state == CSTATE){ 1680 1681 /* Get the current collision count */ 1682 1683 total_col_cnt = ipg_data->col_cnt = 1684 amd8111e_read_mib(mmio, xmt_collisions); 1685 1686 if ((total_col_cnt - prev_col_cnt) < 1687 (ipg_data->diff_col_cnt)){ 1688 1689 ipg_data->diff_col_cnt = 1690 total_col_cnt - prev_col_cnt ; 1691 1692 ipg_data->ipg = ipg_data->current_ipg; 1693 } 1694 1695 ipg_data->current_ipg += IPG_STEP; 1696 1697 if (ipg_data->current_ipg <= MAX_IPG) 1698 tmp_ipg = ipg_data->current_ipg; 1699 else{ 1700 tmp_ipg = ipg_data->ipg; 1701 ipg_data->ipg_state = SSTATE; 1702 } 1703 writew((u32)tmp_ipg, mmio + IPG); 1704 writew((u32)(tmp_ipg - IFS1_DELTA), mmio + IFS1); 1705 } 1706 mod_timer(&lp->ipg_data.ipg_timer, jiffies + IPG_CONVERGE_JIFFIES); 1707 return; 1708 1709} 1710 1711static void amd8111e_probe_ext_phy(struct net_device *dev) 1712{ 1713 struct amd8111e_priv *lp = netdev_priv(dev); 1714 int i; 1715 1716 for (i = 0x1e; i >= 0; i--) { 1717 u32 id1, id2; 1718 1719 if (amd8111e_read_phy(lp, i, MII_PHYSID1, &id1)) 1720 continue; 1721 if (amd8111e_read_phy(lp, i, MII_PHYSID2, &id2)) 1722 continue; 1723 lp->ext_phy_id = (id1 << 16) | id2; 1724 lp->ext_phy_addr = i; 1725 return; 1726 } 1727 lp->ext_phy_id = 0; 1728 lp->ext_phy_addr = 1; 1729} 1730 1731static const struct net_device_ops amd8111e_netdev_ops = { 1732 .ndo_open = amd8111e_open, 1733 .ndo_stop = amd8111e_close, 1734 .ndo_start_xmit = amd8111e_start_xmit, 1735 .ndo_tx_timeout = amd8111e_tx_timeout, 1736 .ndo_get_stats = amd8111e_get_stats, 1737 .ndo_set_rx_mode = amd8111e_set_multicast_list, 1738 .ndo_validate_addr = eth_validate_addr, 1739 .ndo_set_mac_address = amd8111e_set_mac_address, 1740 .ndo_do_ioctl = amd8111e_ioctl, 1741 .ndo_change_mtu = amd8111e_change_mtu, 1742#ifdef CONFIG_NET_POLL_CONTROLLER 1743 .ndo_poll_controller = amd8111e_poll, 1744#endif 1745}; 1746 1747static int amd8111e_probe_one(struct pci_dev *pdev, 1748 const struct pci_device_id *ent) 1749{ 1750 int err, i; 1751 unsigned long reg_addr,reg_len; 1752 struct amd8111e_priv *lp; 1753 struct net_device *dev; 1754 1755 err = pci_enable_device(pdev); 1756 if(err){ 1757 dev_err(&pdev->dev, "Cannot enable new PCI device\n"); 1758 return err; 1759 } 1760 1761 if(!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)){ 1762 dev_err(&pdev->dev, "Cannot find PCI base address\n"); 1763 err = -ENODEV; 1764 goto err_disable_pdev; 1765 } 1766 1767 err = pci_request_regions(pdev, MODULE_NAME); 1768 if(err){ 1769 dev_err(&pdev->dev, "Cannot obtain PCI resources\n"); 1770 goto err_disable_pdev; 1771 } 1772 1773 pci_set_master(pdev); 1774 1775 /* Find power-management capability. */ 1776 if (!pdev->pm_cap) { 1777 dev_err(&pdev->dev, "No Power Management capability\n"); 1778 err = -ENODEV; 1779 goto err_free_reg; 1780 } 1781 1782 /* Initialize DMA */ 1783 if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)) < 0) { 1784 dev_err(&pdev->dev, "DMA not supported\n"); 1785 err = -ENODEV; 1786 goto err_free_reg; 1787 } 1788 1789 reg_addr = pci_resource_start(pdev, 0); 1790 reg_len = pci_resource_len(pdev, 0); 1791 1792 dev = alloc_etherdev(sizeof(struct amd8111e_priv)); 1793 if (!dev) { 1794 err = -ENOMEM; 1795 goto err_free_reg; 1796 } 1797 1798 SET_NETDEV_DEV(dev, &pdev->dev); 1799 1800#if AMD8111E_VLAN_TAG_USED 1801 dev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX ; 1802#endif 1803 1804 lp = netdev_priv(dev); 1805 lp->pci_dev = pdev; 1806 lp->amd8111e_net_dev = dev; 1807 lp->pm_cap = pdev->pm_cap; 1808 1809 spin_lock_init(&lp->lock); 1810 1811 lp->mmio = devm_ioremap(&pdev->dev, reg_addr, reg_len); 1812 if (!lp->mmio) { 1813 dev_err(&pdev->dev, "Cannot map device registers\n"); 1814 err = -ENOMEM; 1815 goto err_free_dev; 1816 } 1817 1818 /* Initializing MAC address */ 1819 for (i = 0; i < ETH_ALEN; i++) 1820 dev->dev_addr[i] = readb(lp->mmio + PADR + i); 1821 1822 /* Setting user defined parametrs */ 1823 lp->ext_phy_option = speed_duplex[card_idx]; 1824 if(coalesce[card_idx]) 1825 lp->options |= OPTION_INTR_COAL_ENABLE; 1826 if(dynamic_ipg[card_idx++]) 1827 lp->options |= OPTION_DYN_IPG_ENABLE; 1828 1829 1830 /* Initialize driver entry points */ 1831 dev->netdev_ops = &amd8111e_netdev_ops; 1832 dev->ethtool_ops = &ops; 1833 dev->irq =pdev->irq; 1834 dev->watchdog_timeo = AMD8111E_TX_TIMEOUT; 1835 dev->min_mtu = AMD8111E_MIN_MTU; 1836 dev->max_mtu = AMD8111E_MAX_MTU; 1837 netif_napi_add(dev, &lp->napi, amd8111e_rx_poll, 32); 1838 1839#if AMD8111E_VLAN_TAG_USED 1840 dev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX; 1841#endif 1842 /* Probe the external PHY */ 1843 amd8111e_probe_ext_phy(dev); 1844 1845 /* setting mii default values */ 1846 lp->mii_if.dev = dev; 1847 lp->mii_if.mdio_read = amd8111e_mdio_read; 1848 lp->mii_if.mdio_write = amd8111e_mdio_write; 1849 lp->mii_if.phy_id = lp->ext_phy_addr; 1850 1851 /* Set receive buffer length and set jumbo option*/ 1852 amd8111e_set_rx_buff_len(dev); 1853 1854 1855 err = register_netdev(dev); 1856 if (err) { 1857 dev_err(&pdev->dev, "Cannot register net device\n"); 1858 goto err_free_dev; 1859 } 1860 1861 pci_set_drvdata(pdev, dev); 1862 1863 /* Initialize software ipg timer */ 1864 if(lp->options & OPTION_DYN_IPG_ENABLE){ 1865 timer_setup(&lp->ipg_data.ipg_timer, amd8111e_config_ipg, 0); 1866 lp->ipg_data.ipg_timer.expires = jiffies + 1867 IPG_CONVERGE_JIFFIES; 1868 lp->ipg_data.ipg = DEFAULT_IPG; 1869 lp->ipg_data.ipg_state = CSTATE; 1870 } 1871 1872 /* display driver and device information */ 1873 chip_version = (readl(lp->mmio + CHIPID) & 0xf0000000)>>28; 1874 dev_info(&pdev->dev, "[ Rev %x ] PCI 10/100BaseT Ethernet %pM\n", 1875 chip_version, dev->dev_addr); 1876 if (lp->ext_phy_id) 1877 dev_info(&pdev->dev, "Found MII PHY ID 0x%08x at address 0x%02x\n", 1878 lp->ext_phy_id, lp->ext_phy_addr); 1879 else 1880 dev_info(&pdev->dev, "Couldn't detect MII PHY, assuming address 0x01\n"); 1881 1882 return 0; 1883 1884err_free_dev: 1885 free_netdev(dev); 1886 1887err_free_reg: 1888 pci_release_regions(pdev); 1889 1890err_disable_pdev: 1891 pci_disable_device(pdev); 1892 return err; 1893 1894} 1895 1896static void amd8111e_remove_one(struct pci_dev *pdev) 1897{ 1898 struct net_device *dev = pci_get_drvdata(pdev); 1899 1900 if (dev) { 1901 unregister_netdev(dev); 1902 free_netdev(dev); 1903 pci_release_regions(pdev); 1904 pci_disable_device(pdev); 1905 } 1906} 1907 1908static const struct pci_device_id amd8111e_pci_tbl[] = { 1909 { 1910 .vendor = PCI_VENDOR_ID_AMD, 1911 .device = PCI_DEVICE_ID_AMD8111E_7462, 1912 }, 1913 { 1914 .vendor = 0, 1915 } 1916}; 1917MODULE_DEVICE_TABLE(pci, amd8111e_pci_tbl); 1918 1919static SIMPLE_DEV_PM_OPS(amd8111e_pm_ops, amd8111e_suspend, amd8111e_resume); 1920 1921static struct pci_driver amd8111e_driver = { 1922 .name = MODULE_NAME, 1923 .id_table = amd8111e_pci_tbl, 1924 .probe = amd8111e_probe_one, 1925 .remove = amd8111e_remove_one, 1926 .driver.pm = &amd8111e_pm_ops 1927}; 1928 1929module_pci_driver(amd8111e_driver); 1930