1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * tsl2550.c - Linux kernel modules for ambient light sensor 4 * 5 * Copyright (C) 2007 Rodolfo Giometti <giometti@linux.it> 6 * Copyright (C) 2007 Eurotech S.p.A. <info@eurotech.it> 7 */ 8 9#include <linux/module.h> 10#include <linux/slab.h> 11#include <linux/i2c.h> 12#include <linux/mutex.h> 13 14#define TSL2550_DRV_NAME "tsl2550" 15#define DRIVER_VERSION "1.2" 16 17/* 18 * Defines 19 */ 20 21#define TSL2550_POWER_DOWN 0x00 22#define TSL2550_POWER_UP 0x03 23#define TSL2550_STANDARD_RANGE 0x18 24#define TSL2550_EXTENDED_RANGE 0x1d 25#define TSL2550_READ_ADC0 0x43 26#define TSL2550_READ_ADC1 0x83 27 28/* 29 * Structs 30 */ 31 32struct tsl2550_data { 33 struct i2c_client *client; 34 struct mutex update_lock; 35 36 unsigned int power_state:1; 37 unsigned int operating_mode:1; 38}; 39 40/* 41 * Global data 42 */ 43 44static const u8 TSL2550_MODE_RANGE[2] = { 45 TSL2550_STANDARD_RANGE, TSL2550_EXTENDED_RANGE, 46}; 47 48/* 49 * Management functions 50 */ 51 52static int tsl2550_set_operating_mode(struct i2c_client *client, int mode) 53{ 54 struct tsl2550_data *data = i2c_get_clientdata(client); 55 56 int ret = i2c_smbus_write_byte(client, TSL2550_MODE_RANGE[mode]); 57 58 data->operating_mode = mode; 59 60 return ret; 61} 62 63static int tsl2550_set_power_state(struct i2c_client *client, int state) 64{ 65 struct tsl2550_data *data = i2c_get_clientdata(client); 66 int ret; 67 68 if (state == 0) 69 ret = i2c_smbus_write_byte(client, TSL2550_POWER_DOWN); 70 else { 71 ret = i2c_smbus_write_byte(client, TSL2550_POWER_UP); 72 73 /* On power up we should reset operating mode also... */ 74 tsl2550_set_operating_mode(client, data->operating_mode); 75 } 76 77 data->power_state = state; 78 79 return ret; 80} 81 82static int tsl2550_get_adc_value(struct i2c_client *client, u8 cmd) 83{ 84 int ret; 85 86 ret = i2c_smbus_read_byte_data(client, cmd); 87 if (ret < 0) 88 return ret; 89 if (!(ret & 0x80)) 90 return -EAGAIN; 91 return ret & 0x7f; /* remove the "valid" bit */ 92} 93 94/* 95 * LUX calculation 96 */ 97 98#define TSL2550_MAX_LUX 1846 99 100static const u8 ratio_lut[] = { 101 100, 100, 100, 100, 100, 100, 100, 100, 102 100, 100, 100, 100, 100, 100, 99, 99, 103 99, 99, 99, 99, 99, 99, 99, 99, 104 99, 99, 99, 98, 98, 98, 98, 98, 105 98, 98, 97, 97, 97, 97, 97, 96, 106 96, 96, 96, 95, 95, 95, 94, 94, 107 93, 93, 93, 92, 92, 91, 91, 90, 108 89, 89, 88, 87, 87, 86, 85, 84, 109 83, 82, 81, 80, 79, 78, 77, 75, 110 74, 73, 71, 69, 68, 66, 64, 62, 111 60, 58, 56, 54, 52, 49, 47, 44, 112 42, 41, 40, 40, 39, 39, 38, 38, 113 37, 37, 37, 36, 36, 36, 35, 35, 114 35, 35, 34, 34, 34, 34, 33, 33, 115 33, 33, 32, 32, 32, 32, 32, 31, 116 31, 31, 31, 31, 30, 30, 30, 30, 117 30, 118}; 119 120static const u16 count_lut[] = { 121 0, 1, 2, 3, 4, 5, 6, 7, 122 8, 9, 10, 11, 12, 13, 14, 15, 123 16, 18, 20, 22, 24, 26, 28, 30, 124 32, 34, 36, 38, 40, 42, 44, 46, 125 49, 53, 57, 61, 65, 69, 73, 77, 126 81, 85, 89, 93, 97, 101, 105, 109, 127 115, 123, 131, 139, 147, 155, 163, 171, 128 179, 187, 195, 203, 211, 219, 227, 235, 129 247, 263, 279, 295, 311, 327, 343, 359, 130 375, 391, 407, 423, 439, 455, 471, 487, 131 511, 543, 575, 607, 639, 671, 703, 735, 132 767, 799, 831, 863, 895, 927, 959, 991, 133 1039, 1103, 1167, 1231, 1295, 1359, 1423, 1487, 134 1551, 1615, 1679, 1743, 1807, 1871, 1935, 1999, 135 2095, 2223, 2351, 2479, 2607, 2735, 2863, 2991, 136 3119, 3247, 3375, 3503, 3631, 3759, 3887, 4015, 137}; 138 139/* 140 * This function is described into Taos TSL2550 Designer's Notebook 141 * pages 2, 3. 142 */ 143static int tsl2550_calculate_lux(u8 ch0, u8 ch1) 144{ 145 unsigned int lux; 146 147 /* Look up count from channel values */ 148 u16 c0 = count_lut[ch0]; 149 u16 c1 = count_lut[ch1]; 150 151 /* Avoid division by 0 and count 1 cannot be greater than count 0 */ 152 if (c1 <= c0) 153 if (c0) { 154 /* 155 * Calculate ratio. 156 * Note: the "128" is a scaling factor 157 */ 158 u8 r = c1 * 128 / c0; 159 160 /* Calculate LUX */ 161 lux = ((c0 - c1) * ratio_lut[r]) / 256; 162 } else 163 lux = 0; 164 else 165 return 0; 166 167 /* LUX range check */ 168 return lux > TSL2550_MAX_LUX ? TSL2550_MAX_LUX : lux; 169} 170 171/* 172 * SysFS support 173 */ 174 175static ssize_t tsl2550_show_power_state(struct device *dev, 176 struct device_attribute *attr, char *buf) 177{ 178 struct tsl2550_data *data = i2c_get_clientdata(to_i2c_client(dev)); 179 180 return sprintf(buf, "%u\n", data->power_state); 181} 182 183static ssize_t tsl2550_store_power_state(struct device *dev, 184 struct device_attribute *attr, const char *buf, size_t count) 185{ 186 struct i2c_client *client = to_i2c_client(dev); 187 struct tsl2550_data *data = i2c_get_clientdata(client); 188 unsigned long val = simple_strtoul(buf, NULL, 10); 189 int ret; 190 191 if (val > 1) 192 return -EINVAL; 193 194 mutex_lock(&data->update_lock); 195 ret = tsl2550_set_power_state(client, val); 196 mutex_unlock(&data->update_lock); 197 198 if (ret < 0) 199 return ret; 200 201 return count; 202} 203 204static DEVICE_ATTR(power_state, S_IWUSR | S_IRUGO, 205 tsl2550_show_power_state, tsl2550_store_power_state); 206 207static ssize_t tsl2550_show_operating_mode(struct device *dev, 208 struct device_attribute *attr, char *buf) 209{ 210 struct tsl2550_data *data = i2c_get_clientdata(to_i2c_client(dev)); 211 212 return sprintf(buf, "%u\n", data->operating_mode); 213} 214 215static ssize_t tsl2550_store_operating_mode(struct device *dev, 216 struct device_attribute *attr, const char *buf, size_t count) 217{ 218 struct i2c_client *client = to_i2c_client(dev); 219 struct tsl2550_data *data = i2c_get_clientdata(client); 220 unsigned long val = simple_strtoul(buf, NULL, 10); 221 int ret; 222 223 if (val > 1) 224 return -EINVAL; 225 226 if (data->power_state == 0) 227 return -EBUSY; 228 229 mutex_lock(&data->update_lock); 230 ret = tsl2550_set_operating_mode(client, val); 231 mutex_unlock(&data->update_lock); 232 233 if (ret < 0) 234 return ret; 235 236 return count; 237} 238 239static DEVICE_ATTR(operating_mode, S_IWUSR | S_IRUGO, 240 tsl2550_show_operating_mode, tsl2550_store_operating_mode); 241 242static ssize_t __tsl2550_show_lux(struct i2c_client *client, char *buf) 243{ 244 struct tsl2550_data *data = i2c_get_clientdata(client); 245 u8 ch0, ch1; 246 int ret; 247 248 ret = tsl2550_get_adc_value(client, TSL2550_READ_ADC0); 249 if (ret < 0) 250 return ret; 251 ch0 = ret; 252 253 ret = tsl2550_get_adc_value(client, TSL2550_READ_ADC1); 254 if (ret < 0) 255 return ret; 256 ch1 = ret; 257 258 /* Do the job */ 259 ret = tsl2550_calculate_lux(ch0, ch1); 260 if (ret < 0) 261 return ret; 262 if (data->operating_mode == 1) 263 ret *= 5; 264 265 return sprintf(buf, "%d\n", ret); 266} 267 268static ssize_t tsl2550_show_lux1_input(struct device *dev, 269 struct device_attribute *attr, char *buf) 270{ 271 struct i2c_client *client = to_i2c_client(dev); 272 struct tsl2550_data *data = i2c_get_clientdata(client); 273 int ret; 274 275 /* No LUX data if not operational */ 276 if (!data->power_state) 277 return -EBUSY; 278 279 mutex_lock(&data->update_lock); 280 ret = __tsl2550_show_lux(client, buf); 281 mutex_unlock(&data->update_lock); 282 283 return ret; 284} 285 286static DEVICE_ATTR(lux1_input, S_IRUGO, 287 tsl2550_show_lux1_input, NULL); 288 289static struct attribute *tsl2550_attributes[] = { 290 &dev_attr_power_state.attr, 291 &dev_attr_operating_mode.attr, 292 &dev_attr_lux1_input.attr, 293 NULL 294}; 295 296static const struct attribute_group tsl2550_attr_group = { 297 .attrs = tsl2550_attributes, 298}; 299 300/* 301 * Initialization function 302 */ 303 304static int tsl2550_init_client(struct i2c_client *client) 305{ 306 struct tsl2550_data *data = i2c_get_clientdata(client); 307 int err; 308 309 /* 310 * Probe the chip. To do so we try to power up the device and then to 311 * read back the 0x03 code 312 */ 313 err = i2c_smbus_read_byte_data(client, TSL2550_POWER_UP); 314 if (err < 0) 315 return err; 316 if (err != TSL2550_POWER_UP) 317 return -ENODEV; 318 data->power_state = 1; 319 320 /* Set the default operating mode */ 321 err = i2c_smbus_write_byte(client, 322 TSL2550_MODE_RANGE[data->operating_mode]); 323 if (err < 0) 324 return err; 325 326 return 0; 327} 328 329/* 330 * I2C init/probing/exit functions 331 */ 332 333static struct i2c_driver tsl2550_driver; 334static int tsl2550_probe(struct i2c_client *client, 335 const struct i2c_device_id *id) 336{ 337 struct i2c_adapter *adapter = client->adapter; 338 struct tsl2550_data *data; 339 int *opmode, err = 0; 340 341 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE 342 | I2C_FUNC_SMBUS_READ_BYTE_DATA)) { 343 err = -EIO; 344 goto exit; 345 } 346 347 data = kzalloc(sizeof(struct tsl2550_data), GFP_KERNEL); 348 if (!data) { 349 err = -ENOMEM; 350 goto exit; 351 } 352 data->client = client; 353 i2c_set_clientdata(client, data); 354 355 /* Check platform data */ 356 opmode = client->dev.platform_data; 357 if (opmode) { 358 if (*opmode < 0 || *opmode > 1) { 359 dev_err(&client->dev, "invalid operating_mode (%d)\n", 360 *opmode); 361 err = -EINVAL; 362 goto exit_kfree; 363 } 364 data->operating_mode = *opmode; 365 } else 366 data->operating_mode = 0; /* default mode is standard */ 367 dev_info(&client->dev, "%s operating mode\n", 368 data->operating_mode ? "extended" : "standard"); 369 370 mutex_init(&data->update_lock); 371 372 /* Initialize the TSL2550 chip */ 373 err = tsl2550_init_client(client); 374 if (err) 375 goto exit_kfree; 376 377 /* Register sysfs hooks */ 378 err = sysfs_create_group(&client->dev.kobj, &tsl2550_attr_group); 379 if (err) 380 goto exit_kfree; 381 382 dev_info(&client->dev, "support ver. %s enabled\n", DRIVER_VERSION); 383 384 return 0; 385 386exit_kfree: 387 kfree(data); 388exit: 389 return err; 390} 391 392static int tsl2550_remove(struct i2c_client *client) 393{ 394 sysfs_remove_group(&client->dev.kobj, &tsl2550_attr_group); 395 396 /* Power down the device */ 397 tsl2550_set_power_state(client, 0); 398 399 kfree(i2c_get_clientdata(client)); 400 401 return 0; 402} 403 404#ifdef CONFIG_PM_SLEEP 405 406static int tsl2550_suspend(struct device *dev) 407{ 408 return tsl2550_set_power_state(to_i2c_client(dev), 0); 409} 410 411static int tsl2550_resume(struct device *dev) 412{ 413 return tsl2550_set_power_state(to_i2c_client(dev), 1); 414} 415 416static SIMPLE_DEV_PM_OPS(tsl2550_pm_ops, tsl2550_suspend, tsl2550_resume); 417#define TSL2550_PM_OPS (&tsl2550_pm_ops) 418 419#else 420 421#define TSL2550_PM_OPS NULL 422 423#endif /* CONFIG_PM_SLEEP */ 424 425static const struct i2c_device_id tsl2550_id[] = { 426 { "tsl2550", 0 }, 427 { } 428}; 429MODULE_DEVICE_TABLE(i2c, tsl2550_id); 430 431static const struct of_device_id tsl2550_of_match[] = { 432 { .compatible = "taos,tsl2550" }, 433 { } 434}; 435MODULE_DEVICE_TABLE(of, tsl2550_of_match); 436 437static struct i2c_driver tsl2550_driver = { 438 .driver = { 439 .name = TSL2550_DRV_NAME, 440 .of_match_table = tsl2550_of_match, 441 .pm = TSL2550_PM_OPS, 442 }, 443 .probe = tsl2550_probe, 444 .remove = tsl2550_remove, 445 .id_table = tsl2550_id, 446}; 447 448module_i2c_driver(tsl2550_driver); 449 450MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>"); 451MODULE_DESCRIPTION("TSL2550 ambient light sensor driver"); 452MODULE_LICENSE("GPL"); 453MODULE_VERSION(DRIVER_VERSION); 454