1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright (C) 1998, 1999  Frodo Looijaard <frodol@dds.nl> and
4 *                           Philip Edelbrock <phil@netroedge.com>
5 * Copyright (C) 2003 Greg Kroah-Hartman <greg@kroah.com>
6 * Copyright (C) 2003 IBM Corp.
7 * Copyright (C) 2004 Jean Delvare <jdelvare@suse.de>
8 */
9
10#include <linux/kernel.h>
11#include <linux/module.h>
12#include <linux/device.h>
13#include <linux/capability.h>
14#include <linux/jiffies.h>
15#include <linux/i2c.h>
16#include <linux/mutex.h>
17
18/* Addresses to scan */
19static const unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54,
20					0x55, 0x56, 0x57, I2C_CLIENT_END };
21
22
23/* Size of EEPROM in bytes */
24#define EEPROM_SIZE		256
25
26/* possible types of eeprom devices */
27enum eeprom_nature {
28	UNKNOWN,
29	VAIO,
30};
31
32/* Each client has this additional data */
33struct eeprom_data {
34	struct mutex update_lock;
35	u8 valid;			/* bitfield, bit!=0 if slice is valid */
36	unsigned long last_updated[8];	/* In jiffies, 8 slices */
37	u8 data[EEPROM_SIZE];		/* Register values */
38	enum eeprom_nature nature;
39};
40
41
42static void eeprom_update_client(struct i2c_client *client, u8 slice)
43{
44	struct eeprom_data *data = i2c_get_clientdata(client);
45	int i;
46
47	mutex_lock(&data->update_lock);
48
49	if (!(data->valid & (1 << slice)) ||
50	    time_after(jiffies, data->last_updated[slice] + 300 * HZ)) {
51		dev_dbg(&client->dev, "Starting eeprom update, slice %u\n", slice);
52
53		if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
54			for (i = slice << 5; i < (slice + 1) << 5; i += 32)
55				if (i2c_smbus_read_i2c_block_data(client, i,
56							32, data->data + i)
57							!= 32)
58					goto exit;
59		} else {
60			for (i = slice << 5; i < (slice + 1) << 5; i += 2) {
61				int word = i2c_smbus_read_word_data(client, i);
62				if (word < 0)
63					goto exit;
64				data->data[i] = word & 0xff;
65				data->data[i + 1] = word >> 8;
66			}
67		}
68		data->last_updated[slice] = jiffies;
69		data->valid |= (1 << slice);
70	}
71exit:
72	mutex_unlock(&data->update_lock);
73}
74
75static ssize_t eeprom_read(struct file *filp, struct kobject *kobj,
76			   struct bin_attribute *bin_attr,
77			   char *buf, loff_t off, size_t count)
78{
79	struct i2c_client *client = kobj_to_i2c_client(kobj);
80	struct eeprom_data *data = i2c_get_clientdata(client);
81	u8 slice;
82
83	/* Only refresh slices which contain requested bytes */
84	for (slice = off >> 5; slice <= (off + count - 1) >> 5; slice++)
85		eeprom_update_client(client, slice);
86
87	/* Hide Vaio private settings to regular users:
88	   - BIOS passwords: bytes 0x00 to 0x0f
89	   - UUID: bytes 0x10 to 0x1f
90	   - Serial number: 0xc0 to 0xdf */
91	if (data->nature == VAIO && !capable(CAP_SYS_ADMIN)) {
92		int i;
93
94		for (i = 0; i < count; i++) {
95			if ((off + i <= 0x1f) ||
96			    (off + i >= 0xc0 && off + i <= 0xdf))
97				buf[i] = 0;
98			else
99				buf[i] = data->data[off + i];
100		}
101	} else {
102		memcpy(buf, &data->data[off], count);
103	}
104
105	return count;
106}
107
108static const struct bin_attribute eeprom_attr = {
109	.attr = {
110		.name = "eeprom",
111		.mode = S_IRUGO,
112	},
113	.size = EEPROM_SIZE,
114	.read = eeprom_read,
115};
116
117/* Return 0 if detection is successful, -ENODEV otherwise */
118static int eeprom_detect(struct i2c_client *client, struct i2c_board_info *info)
119{
120	struct i2c_adapter *adapter = client->adapter;
121
122	/* EDID EEPROMs are often 24C00 EEPROMs, which answer to all
123	   addresses 0x50-0x57, but we only care about 0x50. So decline
124	   attaching to addresses >= 0x51 on DDC buses */
125	if (!(adapter->class & I2C_CLASS_SPD) && client->addr >= 0x51)
126		return -ENODEV;
127
128	/* There are four ways we can read the EEPROM data:
129	   (1) I2C block reads (faster, but unsupported by most adapters)
130	   (2) Word reads (128% overhead)
131	   (3) Consecutive byte reads (88% overhead, unsafe)
132	   (4) Regular byte data reads (265% overhead)
133	   The third and fourth methods are not implemented by this driver
134	   because all known adapters support one of the first two. */
135	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_WORD_DATA)
136	 && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK))
137		return -ENODEV;
138
139	strlcpy(info->type, "eeprom", I2C_NAME_SIZE);
140
141	return 0;
142}
143
144static int eeprom_probe(struct i2c_client *client,
145			const struct i2c_device_id *id)
146{
147	struct i2c_adapter *adapter = client->adapter;
148	struct eeprom_data *data;
149
150	data = devm_kzalloc(&client->dev, sizeof(struct eeprom_data),
151			    GFP_KERNEL);
152	if (!data)
153		return -ENOMEM;
154
155	memset(data->data, 0xff, EEPROM_SIZE);
156	i2c_set_clientdata(client, data);
157	mutex_init(&data->update_lock);
158	data->nature = UNKNOWN;
159
160	/* Detect the Vaio nature of EEPROMs.
161	   We use the "PCG-" or "VGN-" prefix as the signature. */
162	if (client->addr == 0x57
163	 && i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA)) {
164		char name[4];
165
166		name[0] = i2c_smbus_read_byte_data(client, 0x80);
167		name[1] = i2c_smbus_read_byte_data(client, 0x81);
168		name[2] = i2c_smbus_read_byte_data(client, 0x82);
169		name[3] = i2c_smbus_read_byte_data(client, 0x83);
170
171		if (!memcmp(name, "PCG-", 4) || !memcmp(name, "VGN-", 4)) {
172			dev_info(&client->dev, "Vaio EEPROM detected, "
173				 "enabling privacy protection\n");
174			data->nature = VAIO;
175		}
176	}
177
178	/* Let the users know they are using deprecated driver */
179	dev_notice(&client->dev,
180		   "eeprom driver is deprecated, please use at24 instead\n");
181
182	/* create the sysfs eeprom file */
183	return sysfs_create_bin_file(&client->dev.kobj, &eeprom_attr);
184}
185
186static int eeprom_remove(struct i2c_client *client)
187{
188	sysfs_remove_bin_file(&client->dev.kobj, &eeprom_attr);
189
190	return 0;
191}
192
193static const struct i2c_device_id eeprom_id[] = {
194	{ "eeprom", 0 },
195	{ }
196};
197
198static struct i2c_driver eeprom_driver = {
199	.driver = {
200		.name	= "eeprom",
201	},
202	.probe		= eeprom_probe,
203	.remove		= eeprom_remove,
204	.id_table	= eeprom_id,
205
206	.class		= I2C_CLASS_DDC | I2C_CLASS_SPD,
207	.detect		= eeprom_detect,
208	.address_list	= normal_i2c,
209};
210
211module_i2c_driver(eeprom_driver);
212
213MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and "
214		"Philip Edelbrock <phil@netroedge.com> and "
215		"Greg Kroah-Hartman <greg@kroah.com>");
216MODULE_DESCRIPTION("I2C EEPROM driver");
217MODULE_LICENSE("GPL");
218