1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Driver for Xilinx MIPI CSI-2 Rx Subsystem 4 * 5 * Copyright (C) 2016 - 2020 Xilinx, Inc. 6 * 7 * Contacts: Vishal Sagar <vishal.sagar@xilinx.com> 8 * 9 */ 10#include <linux/clk.h> 11#include <linux/delay.h> 12#include <linux/gpio/consumer.h> 13#include <linux/interrupt.h> 14#include <linux/module.h> 15#include <linux/mutex.h> 16#include <linux/of.h> 17#include <linux/of_irq.h> 18#include <linux/platform_device.h> 19#include <linux/v4l2-subdev.h> 20#include <media/media-entity.h> 21#include <media/v4l2-common.h> 22#include <media/v4l2-ctrls.h> 23#include <media/v4l2-fwnode.h> 24#include <media/v4l2-subdev.h> 25#include "xilinx-vip.h" 26 27/* Register register map */ 28#define XCSI_CCR_OFFSET 0x00 29#define XCSI_CCR_SOFTRESET BIT(1) 30#define XCSI_CCR_ENABLE BIT(0) 31 32#define XCSI_PCR_OFFSET 0x04 33#define XCSI_PCR_MAXLANES_MASK GENMASK(4, 3) 34#define XCSI_PCR_ACTLANES_MASK GENMASK(1, 0) 35 36#define XCSI_CSR_OFFSET 0x10 37#define XCSI_CSR_PKTCNT GENMASK(31, 16) 38#define XCSI_CSR_SPFIFOFULL BIT(3) 39#define XCSI_CSR_SPFIFONE BIT(2) 40#define XCSI_CSR_SLBF BIT(1) 41#define XCSI_CSR_RIPCD BIT(0) 42 43#define XCSI_GIER_OFFSET 0x20 44#define XCSI_GIER_GIE BIT(0) 45 46#define XCSI_ISR_OFFSET 0x24 47#define XCSI_IER_OFFSET 0x28 48 49#define XCSI_ISR_FR BIT(31) 50#define XCSI_ISR_VCXFE BIT(30) 51#define XCSI_ISR_WCC BIT(22) 52#define XCSI_ISR_ILC BIT(21) 53#define XCSI_ISR_SPFIFOF BIT(20) 54#define XCSI_ISR_SPFIFONE BIT(19) 55#define XCSI_ISR_SLBF BIT(18) 56#define XCSI_ISR_STOP BIT(17) 57#define XCSI_ISR_SOTERR BIT(13) 58#define XCSI_ISR_SOTSYNCERR BIT(12) 59#define XCSI_ISR_ECC2BERR BIT(11) 60#define XCSI_ISR_ECC1BERR BIT(10) 61#define XCSI_ISR_CRCERR BIT(9) 62#define XCSI_ISR_DATAIDERR BIT(8) 63#define XCSI_ISR_VC3FSYNCERR BIT(7) 64#define XCSI_ISR_VC3FLVLERR BIT(6) 65#define XCSI_ISR_VC2FSYNCERR BIT(5) 66#define XCSI_ISR_VC2FLVLERR BIT(4) 67#define XCSI_ISR_VC1FSYNCERR BIT(3) 68#define XCSI_ISR_VC1FLVLERR BIT(2) 69#define XCSI_ISR_VC0FSYNCERR BIT(1) 70#define XCSI_ISR_VC0FLVLERR BIT(0) 71 72#define XCSI_ISR_ALLINTR_MASK (0xc07e3fff) 73 74/* 75 * Removed VCXFE mask as it doesn't exist in IER 76 * Removed STOP state irq as this will keep driver in irq handler only 77 */ 78#define XCSI_IER_INTR_MASK (XCSI_ISR_ALLINTR_MASK &\ 79 ~(XCSI_ISR_STOP | XCSI_ISR_VCXFE)) 80 81#define XCSI_SPKTR_OFFSET 0x30 82#define XCSI_SPKTR_DATA GENMASK(23, 8) 83#define XCSI_SPKTR_VC GENMASK(7, 6) 84#define XCSI_SPKTR_DT GENMASK(5, 0) 85#define XCSI_SPKT_FIFO_DEPTH 31 86 87#define XCSI_VCXR_OFFSET 0x34 88#define XCSI_VCXR_VCERR GENMASK(23, 0) 89#define XCSI_VCXR_FSYNCERR BIT(1) 90#define XCSI_VCXR_FLVLERR BIT(0) 91 92#define XCSI_CLKINFR_OFFSET 0x3C 93#define XCSI_CLKINFR_STOP BIT(1) 94 95#define XCSI_DLXINFR_OFFSET 0x40 96#define XCSI_DLXINFR_STOP BIT(5) 97#define XCSI_DLXINFR_SOTERR BIT(1) 98#define XCSI_DLXINFR_SOTSYNCERR BIT(0) 99#define XCSI_MAXDL_COUNT 0x4 100 101#define XCSI_VCXINF1R_OFFSET 0x60 102#define XCSI_VCXINF1R_LINECOUNT GENMASK(31, 16) 103#define XCSI_VCXINF1R_LINECOUNT_SHIFT 16 104#define XCSI_VCXINF1R_BYTECOUNT GENMASK(15, 0) 105 106#define XCSI_VCXINF2R_OFFSET 0x64 107#define XCSI_VCXINF2R_DT GENMASK(5, 0) 108#define XCSI_MAXVCX_COUNT 16 109 110/* 111 * Sink pad connected to sensor source pad. 112 * Source pad connected to next module like demosaic. 113 */ 114#define XCSI_MEDIA_PADS 2 115#define XCSI_DEFAULT_WIDTH 1920 116#define XCSI_DEFAULT_HEIGHT 1080 117 118/* MIPI CSI-2 Data Types from spec */ 119#define XCSI_DT_YUV4228B 0x1e 120#define XCSI_DT_YUV42210B 0x1f 121#define XCSI_DT_RGB444 0x20 122#define XCSI_DT_RGB555 0x21 123#define XCSI_DT_RGB565 0x22 124#define XCSI_DT_RGB666 0x23 125#define XCSI_DT_RGB888 0x24 126#define XCSI_DT_RAW6 0x28 127#define XCSI_DT_RAW7 0x29 128#define XCSI_DT_RAW8 0x2a 129#define XCSI_DT_RAW10 0x2b 130#define XCSI_DT_RAW12 0x2c 131#define XCSI_DT_RAW14 0x2d 132#define XCSI_DT_RAW16 0x2e 133#define XCSI_DT_RAW20 0x2f 134 135#define XCSI_VCX_START 4 136#define XCSI_MAX_VC 4 137#define XCSI_MAX_VCX 16 138 139#define XCSI_NEXTREG_OFFSET 4 140 141/* There are 2 events frame sync and frame level error per VC */ 142#define XCSI_VCX_NUM_EVENTS ((XCSI_MAX_VCX - XCSI_MAX_VC) * 2) 143 144/** 145 * struct xcsi2rxss_event - Event log structure 146 * @mask: Event mask 147 * @name: Name of the event 148 */ 149struct xcsi2rxss_event { 150 u32 mask; 151 const char *name; 152}; 153 154static const struct xcsi2rxss_event xcsi2rxss_events[] = { 155 { XCSI_ISR_FR, "Frame Received" }, 156 { XCSI_ISR_VCXFE, "VCX Frame Errors" }, 157 { XCSI_ISR_WCC, "Word Count Errors" }, 158 { XCSI_ISR_ILC, "Invalid Lane Count Error" }, 159 { XCSI_ISR_SPFIFOF, "Short Packet FIFO OverFlow Error" }, 160 { XCSI_ISR_SPFIFONE, "Short Packet FIFO Not Empty" }, 161 { XCSI_ISR_SLBF, "Streamline Buffer Full Error" }, 162 { XCSI_ISR_STOP, "Lane Stop State" }, 163 { XCSI_ISR_SOTERR, "SOT Error" }, 164 { XCSI_ISR_SOTSYNCERR, "SOT Sync Error" }, 165 { XCSI_ISR_ECC2BERR, "2 Bit ECC Unrecoverable Error" }, 166 { XCSI_ISR_ECC1BERR, "1 Bit ECC Recoverable Error" }, 167 { XCSI_ISR_CRCERR, "CRC Error" }, 168 { XCSI_ISR_DATAIDERR, "Data Id Error" }, 169 { XCSI_ISR_VC3FSYNCERR, "Virtual Channel 3 Frame Sync Error" }, 170 { XCSI_ISR_VC3FLVLERR, "Virtual Channel 3 Frame Level Error" }, 171 { XCSI_ISR_VC2FSYNCERR, "Virtual Channel 2 Frame Sync Error" }, 172 { XCSI_ISR_VC2FLVLERR, "Virtual Channel 2 Frame Level Error" }, 173 { XCSI_ISR_VC1FSYNCERR, "Virtual Channel 1 Frame Sync Error" }, 174 { XCSI_ISR_VC1FLVLERR, "Virtual Channel 1 Frame Level Error" }, 175 { XCSI_ISR_VC0FSYNCERR, "Virtual Channel 0 Frame Sync Error" }, 176 { XCSI_ISR_VC0FLVLERR, "Virtual Channel 0 Frame Level Error" } 177}; 178 179#define XCSI_NUM_EVENTS ARRAY_SIZE(xcsi2rxss_events) 180 181/* 182 * This table provides a mapping between CSI-2 Data type 183 * and media bus formats 184 */ 185static const u32 xcsi2dt_mbus_lut[][2] = { 186 { XCSI_DT_YUV4228B, MEDIA_BUS_FMT_UYVY8_1X16 }, 187 { XCSI_DT_YUV42210B, MEDIA_BUS_FMT_UYVY10_1X20 }, 188 { XCSI_DT_RGB444, 0 }, 189 { XCSI_DT_RGB555, 0 }, 190 { XCSI_DT_RGB565, 0 }, 191 { XCSI_DT_RGB666, 0 }, 192 { XCSI_DT_RGB888, MEDIA_BUS_FMT_RBG888_1X24 }, 193 { XCSI_DT_RAW6, 0 }, 194 { XCSI_DT_RAW7, 0 }, 195 { XCSI_DT_RAW8, MEDIA_BUS_FMT_SRGGB8_1X8 }, 196 { XCSI_DT_RAW8, MEDIA_BUS_FMT_SBGGR8_1X8 }, 197 { XCSI_DT_RAW8, MEDIA_BUS_FMT_SGBRG8_1X8 }, 198 { XCSI_DT_RAW8, MEDIA_BUS_FMT_SGRBG8_1X8 }, 199 { XCSI_DT_RAW10, MEDIA_BUS_FMT_SRGGB10_1X10 }, 200 { XCSI_DT_RAW10, MEDIA_BUS_FMT_SBGGR10_1X10 }, 201 { XCSI_DT_RAW10, MEDIA_BUS_FMT_SGBRG10_1X10 }, 202 { XCSI_DT_RAW10, MEDIA_BUS_FMT_SGRBG10_1X10 }, 203 { XCSI_DT_RAW12, MEDIA_BUS_FMT_SRGGB12_1X12 }, 204 { XCSI_DT_RAW12, MEDIA_BUS_FMT_SBGGR12_1X12 }, 205 { XCSI_DT_RAW12, MEDIA_BUS_FMT_SGBRG12_1X12 }, 206 { XCSI_DT_RAW12, MEDIA_BUS_FMT_SGRBG12_1X12 }, 207 { XCSI_DT_RAW16, MEDIA_BUS_FMT_SRGGB16_1X16 }, 208 { XCSI_DT_RAW16, MEDIA_BUS_FMT_SBGGR16_1X16 }, 209 { XCSI_DT_RAW16, MEDIA_BUS_FMT_SGBRG16_1X16 }, 210 { XCSI_DT_RAW16, MEDIA_BUS_FMT_SGRBG16_1X16 }, 211 { XCSI_DT_RAW20, 0 }, 212}; 213 214/** 215 * struct xcsi2rxss_state - CSI-2 Rx Subsystem device structure 216 * @subdev: The v4l2 subdev structure 217 * @format: Active V4L2 formats on each pad 218 * @default_format: Default V4L2 format 219 * @events: counter for events 220 * @vcx_events: counter for vcx_events 221 * @dev: Platform structure 222 * @rsubdev: Remote subdev connected to sink pad 223 * @rst_gpio: reset to video_aresetn 224 * @clks: array of clocks 225 * @iomem: Base address of subsystem 226 * @max_num_lanes: Maximum number of lanes present 227 * @datatype: Data type filter 228 * @lock: mutex for accessing this structure 229 * @pads: media pads 230 * @streaming: Flag for storing streaming state 231 * @enable_active_lanes: If number of active lanes can be modified 232 * @en_vcx: If more than 4 VC are enabled 233 * 234 * This structure contains the device driver related parameters 235 */ 236struct xcsi2rxss_state { 237 struct v4l2_subdev subdev; 238 struct v4l2_mbus_framefmt format; 239 struct v4l2_mbus_framefmt default_format; 240 u32 events[XCSI_NUM_EVENTS]; 241 u32 vcx_events[XCSI_VCX_NUM_EVENTS]; 242 struct device *dev; 243 struct v4l2_subdev *rsubdev; 244 struct gpio_desc *rst_gpio; 245 struct clk_bulk_data *clks; 246 void __iomem *iomem; 247 u32 max_num_lanes; 248 u32 datatype; 249 /* used to protect access to this struct */ 250 struct mutex lock; 251 struct media_pad pads[XCSI_MEDIA_PADS]; 252 bool streaming; 253 bool enable_active_lanes; 254 bool en_vcx; 255}; 256 257static const struct clk_bulk_data xcsi2rxss_clks[] = { 258 { .id = "lite_aclk" }, 259 { .id = "video_aclk" }, 260}; 261 262static inline struct xcsi2rxss_state * 263to_xcsi2rxssstate(struct v4l2_subdev *subdev) 264{ 265 return container_of(subdev, struct xcsi2rxss_state, subdev); 266} 267 268/* 269 * Register related operations 270 */ 271static inline u32 xcsi2rxss_read(struct xcsi2rxss_state *xcsi2rxss, u32 addr) 272{ 273 return ioread32(xcsi2rxss->iomem + addr); 274} 275 276static inline void xcsi2rxss_write(struct xcsi2rxss_state *xcsi2rxss, u32 addr, 277 u32 value) 278{ 279 iowrite32(value, xcsi2rxss->iomem + addr); 280} 281 282static inline void xcsi2rxss_clr(struct xcsi2rxss_state *xcsi2rxss, u32 addr, 283 u32 clr) 284{ 285 xcsi2rxss_write(xcsi2rxss, addr, 286 xcsi2rxss_read(xcsi2rxss, addr) & ~clr); 287} 288 289static inline void xcsi2rxss_set(struct xcsi2rxss_state *xcsi2rxss, u32 addr, 290 u32 set) 291{ 292 xcsi2rxss_write(xcsi2rxss, addr, xcsi2rxss_read(xcsi2rxss, addr) | set); 293} 294 295/* 296 * This function returns the nth mbus for a data type. 297 * In case of error, mbus code returned is 0. 298 */ 299static u32 xcsi2rxss_get_nth_mbus(u32 dt, u32 n) 300{ 301 unsigned int i; 302 303 for (i = 0; i < ARRAY_SIZE(xcsi2dt_mbus_lut); i++) { 304 if (xcsi2dt_mbus_lut[i][0] == dt) { 305 if (n-- == 0) 306 return xcsi2dt_mbus_lut[i][1]; 307 } 308 } 309 310 return 0; 311} 312 313/* This returns the data type for a media bus format else 0 */ 314static u32 xcsi2rxss_get_dt(u32 mbus) 315{ 316 unsigned int i; 317 318 for (i = 0; i < ARRAY_SIZE(xcsi2dt_mbus_lut); i++) { 319 if (xcsi2dt_mbus_lut[i][1] == mbus) 320 return xcsi2dt_mbus_lut[i][0]; 321 } 322 323 return 0; 324} 325 326/** 327 * xcsi2rxss_soft_reset - Does a soft reset of the MIPI CSI-2 Rx Subsystem 328 * @state: Xilinx CSI-2 Rx Subsystem structure pointer 329 * 330 * Core takes less than 100 video clock cycles to reset. 331 * So a larger timeout value is chosen for margin. 332 * 333 * Return: 0 - on success OR -ETIME if reset times out 334 */ 335static int xcsi2rxss_soft_reset(struct xcsi2rxss_state *state) 336{ 337 u32 timeout = 1000; /* us */ 338 339 xcsi2rxss_set(state, XCSI_CCR_OFFSET, XCSI_CCR_SOFTRESET); 340 341 while (xcsi2rxss_read(state, XCSI_CSR_OFFSET) & XCSI_CSR_RIPCD) { 342 if (timeout == 0) { 343 dev_err(state->dev, "soft reset timed out!\n"); 344 return -ETIME; 345 } 346 347 timeout--; 348 udelay(1); 349 } 350 351 xcsi2rxss_clr(state, XCSI_CCR_OFFSET, XCSI_CCR_SOFTRESET); 352 return 0; 353} 354 355static void xcsi2rxss_hard_reset(struct xcsi2rxss_state *state) 356{ 357 if (!state->rst_gpio) 358 return; 359 360 /* minimum of 40 dphy_clk_200M cycles */ 361 gpiod_set_value_cansleep(state->rst_gpio, 1); 362 usleep_range(1, 2); 363 gpiod_set_value_cansleep(state->rst_gpio, 0); 364} 365 366static void xcsi2rxss_reset_event_counters(struct xcsi2rxss_state *state) 367{ 368 unsigned int i; 369 370 for (i = 0; i < XCSI_NUM_EVENTS; i++) 371 state->events[i] = 0; 372 373 for (i = 0; i < XCSI_VCX_NUM_EVENTS; i++) 374 state->vcx_events[i] = 0; 375} 376 377/* Print event counters */ 378static void xcsi2rxss_log_counters(struct xcsi2rxss_state *state) 379{ 380 struct device *dev = state->dev; 381 unsigned int i; 382 383 for (i = 0; i < XCSI_NUM_EVENTS; i++) { 384 if (state->events[i] > 0) { 385 dev_info(dev, "%s events: %d\n", 386 xcsi2rxss_events[i].name, 387 state->events[i]); 388 } 389 } 390 391 if (state->en_vcx) { 392 for (i = 0; i < XCSI_VCX_NUM_EVENTS; i++) { 393 if (state->vcx_events[i] > 0) { 394 dev_info(dev, 395 "VC %d Frame %s err vcx events: %d\n", 396 (i / 2) + XCSI_VCX_START, 397 i & 1 ? "Sync" : "Level", 398 state->vcx_events[i]); 399 } 400 } 401 } 402} 403 404/** 405 * xcsi2rxss_log_status - Logs the status of the CSI-2 Receiver 406 * @sd: Pointer to V4L2 subdevice structure 407 * 408 * This function prints the current status of Xilinx MIPI CSI-2 409 * 410 * Return: 0 on success 411 */ 412static int xcsi2rxss_log_status(struct v4l2_subdev *sd) 413{ 414 struct xcsi2rxss_state *xcsi2rxss = to_xcsi2rxssstate(sd); 415 struct device *dev = xcsi2rxss->dev; 416 u32 reg, data; 417 unsigned int i, max_vc; 418 419 mutex_lock(&xcsi2rxss->lock); 420 421 xcsi2rxss_log_counters(xcsi2rxss); 422 423 dev_info(dev, "***** Core Status *****\n"); 424 data = xcsi2rxss_read(xcsi2rxss, XCSI_CSR_OFFSET); 425 dev_info(dev, "Short Packet FIFO Full = %s\n", 426 data & XCSI_CSR_SPFIFOFULL ? "true" : "false"); 427 dev_info(dev, "Short Packet FIFO Not Empty = %s\n", 428 data & XCSI_CSR_SPFIFONE ? "true" : "false"); 429 dev_info(dev, "Stream line buffer full = %s\n", 430 data & XCSI_CSR_SLBF ? "true" : "false"); 431 dev_info(dev, "Soft reset/Core disable in progress = %s\n", 432 data & XCSI_CSR_RIPCD ? "true" : "false"); 433 434 /* Clk & Lane Info */ 435 dev_info(dev, "******** Clock Lane Info *********\n"); 436 data = xcsi2rxss_read(xcsi2rxss, XCSI_CLKINFR_OFFSET); 437 dev_info(dev, "Clock Lane in Stop State = %s\n", 438 data & XCSI_CLKINFR_STOP ? "true" : "false"); 439 440 dev_info(dev, "******** Data Lane Info *********\n"); 441 dev_info(dev, "Lane\tSoT Error\tSoT Sync Error\tStop State\n"); 442 reg = XCSI_DLXINFR_OFFSET; 443 for (i = 0; i < XCSI_MAXDL_COUNT; i++) { 444 data = xcsi2rxss_read(xcsi2rxss, reg); 445 446 dev_info(dev, "%d\t%s\t\t%s\t\t%s\n", i, 447 data & XCSI_DLXINFR_SOTERR ? "true" : "false", 448 data & XCSI_DLXINFR_SOTSYNCERR ? "true" : "false", 449 data & XCSI_DLXINFR_STOP ? "true" : "false"); 450 451 reg += XCSI_NEXTREG_OFFSET; 452 } 453 454 /* Virtual Channel Image Information */ 455 dev_info(dev, "********** Virtual Channel Info ************\n"); 456 dev_info(dev, "VC\tLine Count\tByte Count\tData Type\n"); 457 if (xcsi2rxss->en_vcx) 458 max_vc = XCSI_MAX_VCX; 459 else 460 max_vc = XCSI_MAX_VC; 461 462 reg = XCSI_VCXINF1R_OFFSET; 463 for (i = 0; i < max_vc; i++) { 464 u32 line_count, byte_count, data_type; 465 466 /* Get line and byte count from VCXINFR1 Register */ 467 data = xcsi2rxss_read(xcsi2rxss, reg); 468 byte_count = data & XCSI_VCXINF1R_BYTECOUNT; 469 line_count = data & XCSI_VCXINF1R_LINECOUNT; 470 line_count >>= XCSI_VCXINF1R_LINECOUNT_SHIFT; 471 472 /* Get data type from VCXINFR2 Register */ 473 reg += XCSI_NEXTREG_OFFSET; 474 data = xcsi2rxss_read(xcsi2rxss, reg); 475 data_type = data & XCSI_VCXINF2R_DT; 476 477 dev_info(dev, "%d\t%d\t\t%d\t\t0x%x\n", i, line_count, 478 byte_count, data_type); 479 480 /* Move to next pair of VC Info registers */ 481 reg += XCSI_NEXTREG_OFFSET; 482 } 483 484 mutex_unlock(&xcsi2rxss->lock); 485 486 return 0; 487} 488 489static struct v4l2_subdev *xcsi2rxss_get_remote_subdev(struct media_pad *local) 490{ 491 struct media_pad *remote; 492 493 remote = media_entity_remote_pad(local); 494 if (!remote || !is_media_entity_v4l2_subdev(remote->entity)) 495 return NULL; 496 497 return media_entity_to_v4l2_subdev(remote->entity); 498} 499 500static int xcsi2rxss_start_stream(struct xcsi2rxss_state *state) 501{ 502 int ret = 0; 503 504 /* enable core */ 505 xcsi2rxss_set(state, XCSI_CCR_OFFSET, XCSI_CCR_ENABLE); 506 507 ret = xcsi2rxss_soft_reset(state); 508 if (ret) { 509 state->streaming = false; 510 return ret; 511 } 512 513 /* enable interrupts */ 514 xcsi2rxss_clr(state, XCSI_GIER_OFFSET, XCSI_GIER_GIE); 515 xcsi2rxss_write(state, XCSI_IER_OFFSET, XCSI_IER_INTR_MASK); 516 xcsi2rxss_set(state, XCSI_GIER_OFFSET, XCSI_GIER_GIE); 517 518 state->streaming = true; 519 520 state->rsubdev = 521 xcsi2rxss_get_remote_subdev(&state->pads[XVIP_PAD_SINK]); 522 523 ret = v4l2_subdev_call(state->rsubdev, video, s_stream, 1); 524 if (ret) { 525 /* disable interrupts */ 526 xcsi2rxss_clr(state, XCSI_IER_OFFSET, XCSI_IER_INTR_MASK); 527 xcsi2rxss_clr(state, XCSI_GIER_OFFSET, XCSI_GIER_GIE); 528 529 /* disable core */ 530 xcsi2rxss_clr(state, XCSI_CCR_OFFSET, XCSI_CCR_ENABLE); 531 state->streaming = false; 532 } 533 534 return ret; 535} 536 537static void xcsi2rxss_stop_stream(struct xcsi2rxss_state *state) 538{ 539 v4l2_subdev_call(state->rsubdev, video, s_stream, 0); 540 541 /* disable interrupts */ 542 xcsi2rxss_clr(state, XCSI_IER_OFFSET, XCSI_IER_INTR_MASK); 543 xcsi2rxss_clr(state, XCSI_GIER_OFFSET, XCSI_GIER_GIE); 544 545 /* disable core */ 546 xcsi2rxss_clr(state, XCSI_CCR_OFFSET, XCSI_CCR_ENABLE); 547 state->streaming = false; 548} 549 550/** 551 * xcsi2rxss_irq_handler - Interrupt handler for CSI-2 552 * @irq: IRQ number 553 * @data: Pointer to device state 554 * 555 * In the interrupt handler, a list of event counters are updated for 556 * corresponding interrupts. This is useful to get status / debug. 557 * 558 * Return: IRQ_HANDLED after handling interrupts 559 */ 560static irqreturn_t xcsi2rxss_irq_handler(int irq, void *data) 561{ 562 struct xcsi2rxss_state *state = (struct xcsi2rxss_state *)data; 563 struct device *dev = state->dev; 564 u32 status; 565 566 status = xcsi2rxss_read(state, XCSI_ISR_OFFSET) & XCSI_ISR_ALLINTR_MASK; 567 xcsi2rxss_write(state, XCSI_ISR_OFFSET, status); 568 569 /* Received a short packet */ 570 if (status & XCSI_ISR_SPFIFONE) { 571 u32 count = 0; 572 573 /* 574 * Drain generic short packet FIFO by reading max 31 575 * (fifo depth) short packets from fifo or till fifo is empty. 576 */ 577 for (count = 0; count < XCSI_SPKT_FIFO_DEPTH; ++count) { 578 u32 spfifostat, spkt; 579 580 spkt = xcsi2rxss_read(state, XCSI_SPKTR_OFFSET); 581 dev_dbg(dev, "Short packet = 0x%08x\n", spkt); 582 spfifostat = xcsi2rxss_read(state, XCSI_ISR_OFFSET); 583 spfifostat &= XCSI_ISR_SPFIFONE; 584 if (!spfifostat) 585 break; 586 xcsi2rxss_write(state, XCSI_ISR_OFFSET, spfifostat); 587 } 588 } 589 590 /* Short packet FIFO overflow */ 591 if (status & XCSI_ISR_SPFIFOF) 592 dev_dbg_ratelimited(dev, "Short packet FIFO overflowed\n"); 593 594 /* 595 * Stream line buffer full 596 * This means there is a backpressure from downstream IP 597 */ 598 if (status & XCSI_ISR_SLBF) { 599 dev_alert_ratelimited(dev, "Stream Line Buffer Full!\n"); 600 601 /* disable interrupts */ 602 xcsi2rxss_clr(state, XCSI_IER_OFFSET, XCSI_IER_INTR_MASK); 603 xcsi2rxss_clr(state, XCSI_GIER_OFFSET, XCSI_GIER_GIE); 604 605 /* disable core */ 606 xcsi2rxss_clr(state, XCSI_CCR_OFFSET, XCSI_CCR_ENABLE); 607 608 /* 609 * The IP needs to be hard reset before it can be used now. 610 * This will be done in streamoff. 611 */ 612 613 /* 614 * TODO: Notify the whole pipeline with v4l2_subdev_notify() to 615 * inform userspace. 616 */ 617 } 618 619 /* Increment event counters */ 620 if (status & XCSI_ISR_ALLINTR_MASK) { 621 unsigned int i; 622 623 for (i = 0; i < XCSI_NUM_EVENTS; i++) { 624 if (!(status & xcsi2rxss_events[i].mask)) 625 continue; 626 state->events[i]++; 627 dev_dbg_ratelimited(dev, "%s: %u\n", 628 xcsi2rxss_events[i].name, 629 state->events[i]); 630 } 631 632 if (status & XCSI_ISR_VCXFE && state->en_vcx) { 633 u32 vcxstatus; 634 635 vcxstatus = xcsi2rxss_read(state, XCSI_VCXR_OFFSET); 636 vcxstatus &= XCSI_VCXR_VCERR; 637 for (i = 0; i < XCSI_VCX_NUM_EVENTS; i++) { 638 if (!(vcxstatus & BIT(i))) 639 continue; 640 state->vcx_events[i]++; 641 } 642 xcsi2rxss_write(state, XCSI_VCXR_OFFSET, vcxstatus); 643 } 644 } 645 646 return IRQ_HANDLED; 647} 648 649/** 650 * xcsi2rxss_s_stream - It is used to start/stop the streaming. 651 * @sd: V4L2 Sub device 652 * @enable: Flag (True / False) 653 * 654 * This function controls the start or stop of streaming for the 655 * Xilinx MIPI CSI-2 Rx Subsystem. 656 * 657 * Return: 0 on success, errors otherwise 658 */ 659static int xcsi2rxss_s_stream(struct v4l2_subdev *sd, int enable) 660{ 661 struct xcsi2rxss_state *xcsi2rxss = to_xcsi2rxssstate(sd); 662 int ret = 0; 663 664 mutex_lock(&xcsi2rxss->lock); 665 666 if (enable == xcsi2rxss->streaming) 667 goto stream_done; 668 669 if (enable) { 670 xcsi2rxss_reset_event_counters(xcsi2rxss); 671 ret = xcsi2rxss_start_stream(xcsi2rxss); 672 } else { 673 xcsi2rxss_stop_stream(xcsi2rxss); 674 xcsi2rxss_hard_reset(xcsi2rxss); 675 } 676 677stream_done: 678 mutex_unlock(&xcsi2rxss->lock); 679 return ret; 680} 681 682static struct v4l2_mbus_framefmt * 683__xcsi2rxss_get_pad_format(struct xcsi2rxss_state *xcsi2rxss, 684 struct v4l2_subdev_pad_config *cfg, 685 unsigned int pad, u32 which) 686{ 687 switch (which) { 688 case V4L2_SUBDEV_FORMAT_TRY: 689 return v4l2_subdev_get_try_format(&xcsi2rxss->subdev, cfg, pad); 690 case V4L2_SUBDEV_FORMAT_ACTIVE: 691 return &xcsi2rxss->format; 692 default: 693 return NULL; 694 } 695} 696 697/** 698 * xcsi2rxss_init_cfg - Initialise the pad format config to default 699 * @sd: Pointer to V4L2 Sub device structure 700 * @cfg: Pointer to sub device pad information structure 701 * 702 * This function is used to initialize the pad format with the default 703 * values. 704 * 705 * Return: 0 on success 706 */ 707static int xcsi2rxss_init_cfg(struct v4l2_subdev *sd, 708 struct v4l2_subdev_pad_config *cfg) 709{ 710 struct xcsi2rxss_state *xcsi2rxss = to_xcsi2rxssstate(sd); 711 struct v4l2_mbus_framefmt *format; 712 unsigned int i; 713 714 mutex_lock(&xcsi2rxss->lock); 715 for (i = 0; i < XCSI_MEDIA_PADS; i++) { 716 format = v4l2_subdev_get_try_format(sd, cfg, i); 717 *format = xcsi2rxss->default_format; 718 } 719 mutex_unlock(&xcsi2rxss->lock); 720 721 return 0; 722} 723 724/** 725 * xcsi2rxss_get_format - Get the pad format 726 * @sd: Pointer to V4L2 Sub device structure 727 * @cfg: Pointer to sub device pad information structure 728 * @fmt: Pointer to pad level media bus format 729 * 730 * This function is used to get the pad format information. 731 * 732 * Return: 0 on success 733 */ 734static int xcsi2rxss_get_format(struct v4l2_subdev *sd, 735 struct v4l2_subdev_pad_config *cfg, 736 struct v4l2_subdev_format *fmt) 737{ 738 struct xcsi2rxss_state *xcsi2rxss = to_xcsi2rxssstate(sd); 739 740 mutex_lock(&xcsi2rxss->lock); 741 fmt->format = *__xcsi2rxss_get_pad_format(xcsi2rxss, cfg, fmt->pad, 742 fmt->which); 743 mutex_unlock(&xcsi2rxss->lock); 744 745 return 0; 746} 747 748/** 749 * xcsi2rxss_set_format - This is used to set the pad format 750 * @sd: Pointer to V4L2 Sub device structure 751 * @cfg: Pointer to sub device pad information structure 752 * @fmt: Pointer to pad level media bus format 753 * 754 * This function is used to set the pad format. Since the pad format is fixed 755 * in hardware, it can't be modified on run time. So when a format set is 756 * requested by application, all parameters except the format type is saved 757 * for the pad and the original pad format is sent back to the application. 758 * 759 * Return: 0 on success 760 */ 761static int xcsi2rxss_set_format(struct v4l2_subdev *sd, 762 struct v4l2_subdev_pad_config *cfg, 763 struct v4l2_subdev_format *fmt) 764{ 765 struct xcsi2rxss_state *xcsi2rxss = to_xcsi2rxssstate(sd); 766 struct v4l2_mbus_framefmt *__format; 767 u32 dt; 768 769 mutex_lock(&xcsi2rxss->lock); 770 771 /* 772 * Only the format->code parameter matters for CSI as the 773 * CSI format cannot be changed at runtime. 774 * Ensure that format to set is copied to over to CSI pad format 775 */ 776 __format = __xcsi2rxss_get_pad_format(xcsi2rxss, cfg, 777 fmt->pad, fmt->which); 778 779 /* only sink pad format can be updated */ 780 if (fmt->pad == XVIP_PAD_SOURCE) { 781 fmt->format = *__format; 782 mutex_unlock(&xcsi2rxss->lock); 783 return 0; 784 } 785 786 /* 787 * RAW8 is supported in all datatypes. So if requested media bus format 788 * is of RAW8 type, then allow to be set. In case core is configured to 789 * other RAW, YUV422 8/10 or RGB888, set appropriate media bus format. 790 */ 791 dt = xcsi2rxss_get_dt(fmt->format.code); 792 if (dt != xcsi2rxss->datatype && dt != XCSI_DT_RAW8) { 793 dev_dbg(xcsi2rxss->dev, "Unsupported media bus format"); 794 /* set the default format for the data type */ 795 fmt->format.code = xcsi2rxss_get_nth_mbus(xcsi2rxss->datatype, 796 0); 797 } 798 799 *__format = fmt->format; 800 mutex_unlock(&xcsi2rxss->lock); 801 802 return 0; 803} 804 805/* 806 * xcsi2rxss_enum_mbus_code - Handle pixel format enumeration 807 * @sd: pointer to v4l2 subdev structure 808 * @cfg: V4L2 subdev pad configuration 809 * @code: pointer to v4l2_subdev_mbus_code_enum structure 810 * 811 * Return: -EINVAL or zero on success 812 */ 813static int xcsi2rxss_enum_mbus_code(struct v4l2_subdev *sd, 814 struct v4l2_subdev_pad_config *cfg, 815 struct v4l2_subdev_mbus_code_enum *code) 816{ 817 struct xcsi2rxss_state *state = to_xcsi2rxssstate(sd); 818 u32 dt, n; 819 int ret = 0; 820 821 /* RAW8 dt packets are available in all DT configurations */ 822 if (code->index < 4) { 823 n = code->index; 824 dt = XCSI_DT_RAW8; 825 } else if (state->datatype != XCSI_DT_RAW8) { 826 n = code->index - 4; 827 dt = state->datatype; 828 } else { 829 return -EINVAL; 830 } 831 832 code->code = xcsi2rxss_get_nth_mbus(dt, n); 833 if (!code->code) 834 ret = -EINVAL; 835 836 return ret; 837} 838 839/* ----------------------------------------------------------------------------- 840 * Media Operations 841 */ 842 843static const struct media_entity_operations xcsi2rxss_media_ops = { 844 .link_validate = v4l2_subdev_link_validate 845}; 846 847static const struct v4l2_subdev_core_ops xcsi2rxss_core_ops = { 848 .log_status = xcsi2rxss_log_status, 849}; 850 851static const struct v4l2_subdev_video_ops xcsi2rxss_video_ops = { 852 .s_stream = xcsi2rxss_s_stream 853}; 854 855static const struct v4l2_subdev_pad_ops xcsi2rxss_pad_ops = { 856 .init_cfg = xcsi2rxss_init_cfg, 857 .get_fmt = xcsi2rxss_get_format, 858 .set_fmt = xcsi2rxss_set_format, 859 .enum_mbus_code = xcsi2rxss_enum_mbus_code, 860 .link_validate = v4l2_subdev_link_validate_default, 861}; 862 863static const struct v4l2_subdev_ops xcsi2rxss_ops = { 864 .core = &xcsi2rxss_core_ops, 865 .video = &xcsi2rxss_video_ops, 866 .pad = &xcsi2rxss_pad_ops 867}; 868 869static int xcsi2rxss_parse_of(struct xcsi2rxss_state *xcsi2rxss) 870{ 871 struct device *dev = xcsi2rxss->dev; 872 struct device_node *node = dev->of_node; 873 874 struct fwnode_handle *ep; 875 struct v4l2_fwnode_endpoint vep = { 876 .bus_type = V4L2_MBUS_CSI2_DPHY 877 }; 878 bool en_csi_v20, vfb; 879 int ret; 880 881 en_csi_v20 = of_property_read_bool(node, "xlnx,en-csi-v2-0"); 882 if (en_csi_v20) 883 xcsi2rxss->en_vcx = of_property_read_bool(node, "xlnx,en-vcx"); 884 885 xcsi2rxss->enable_active_lanes = 886 of_property_read_bool(node, "xlnx,en-active-lanes"); 887 888 ret = of_property_read_u32(node, "xlnx,csi-pxl-format", 889 &xcsi2rxss->datatype); 890 if (ret < 0) { 891 dev_err(dev, "missing xlnx,csi-pxl-format property\n"); 892 return ret; 893 } 894 895 switch (xcsi2rxss->datatype) { 896 case XCSI_DT_YUV4228B: 897 case XCSI_DT_RGB444: 898 case XCSI_DT_RGB555: 899 case XCSI_DT_RGB565: 900 case XCSI_DT_RGB666: 901 case XCSI_DT_RGB888: 902 case XCSI_DT_RAW6: 903 case XCSI_DT_RAW7: 904 case XCSI_DT_RAW8: 905 case XCSI_DT_RAW10: 906 case XCSI_DT_RAW12: 907 case XCSI_DT_RAW14: 908 break; 909 case XCSI_DT_YUV42210B: 910 case XCSI_DT_RAW16: 911 case XCSI_DT_RAW20: 912 if (!en_csi_v20) { 913 ret = -EINVAL; 914 dev_dbg(dev, "enable csi v2 for this pixel format"); 915 } 916 break; 917 default: 918 ret = -EINVAL; 919 } 920 if (ret < 0) { 921 dev_err(dev, "invalid csi-pxl-format property!\n"); 922 return ret; 923 } 924 925 vfb = of_property_read_bool(node, "xlnx,vfb"); 926 if (!vfb) { 927 dev_err(dev, "operation without VFB is not supported\n"); 928 return -EINVAL; 929 } 930 931 ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), 932 XVIP_PAD_SINK, 0, 933 FWNODE_GRAPH_ENDPOINT_NEXT); 934 if (!ep) { 935 dev_err(dev, "no sink port found"); 936 return -EINVAL; 937 } 938 939 ret = v4l2_fwnode_endpoint_parse(ep, &vep); 940 fwnode_handle_put(ep); 941 if (ret) { 942 dev_err(dev, "error parsing sink port"); 943 return ret; 944 } 945 946 dev_dbg(dev, "mipi number lanes = %d\n", 947 vep.bus.mipi_csi2.num_data_lanes); 948 949 xcsi2rxss->max_num_lanes = vep.bus.mipi_csi2.num_data_lanes; 950 951 ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), 952 XVIP_PAD_SOURCE, 0, 953 FWNODE_GRAPH_ENDPOINT_NEXT); 954 if (!ep) { 955 dev_err(dev, "no source port found"); 956 return -EINVAL; 957 } 958 959 fwnode_handle_put(ep); 960 961 dev_dbg(dev, "vcx %s, %u data lanes (%s), data type 0x%02x\n", 962 xcsi2rxss->en_vcx ? "enabled" : "disabled", 963 xcsi2rxss->max_num_lanes, 964 xcsi2rxss->enable_active_lanes ? "dynamic" : "static", 965 xcsi2rxss->datatype); 966 967 return 0; 968} 969 970static int xcsi2rxss_probe(struct platform_device *pdev) 971{ 972 struct v4l2_subdev *subdev; 973 struct xcsi2rxss_state *xcsi2rxss; 974 int num_clks = ARRAY_SIZE(xcsi2rxss_clks); 975 struct device *dev = &pdev->dev; 976 int irq, ret; 977 978 xcsi2rxss = devm_kzalloc(dev, sizeof(*xcsi2rxss), GFP_KERNEL); 979 if (!xcsi2rxss) 980 return -ENOMEM; 981 982 xcsi2rxss->dev = dev; 983 984 xcsi2rxss->clks = devm_kmemdup(dev, xcsi2rxss_clks, 985 sizeof(xcsi2rxss_clks), GFP_KERNEL); 986 if (!xcsi2rxss->clks) 987 return -ENOMEM; 988 989 /* Reset GPIO */ 990 xcsi2rxss->rst_gpio = devm_gpiod_get_optional(dev, "video-reset", 991 GPIOD_OUT_HIGH); 992 if (IS_ERR(xcsi2rxss->rst_gpio)) { 993 if (PTR_ERR(xcsi2rxss->rst_gpio) != -EPROBE_DEFER) 994 dev_err(dev, "Video Reset GPIO not setup in DT"); 995 return PTR_ERR(xcsi2rxss->rst_gpio); 996 } 997 998 ret = xcsi2rxss_parse_of(xcsi2rxss); 999 if (ret < 0) 1000 return ret; 1001 1002 xcsi2rxss->iomem = devm_platform_ioremap_resource(pdev, 0); 1003 if (IS_ERR(xcsi2rxss->iomem)) 1004 return PTR_ERR(xcsi2rxss->iomem); 1005 1006 irq = platform_get_irq(pdev, 0); 1007 if (irq < 0) 1008 return irq; 1009 1010 ret = devm_request_threaded_irq(dev, irq, NULL, 1011 xcsi2rxss_irq_handler, IRQF_ONESHOT, 1012 dev_name(dev), xcsi2rxss); 1013 if (ret) { 1014 dev_err(dev, "Err = %d Interrupt handler reg failed!\n", ret); 1015 return ret; 1016 } 1017 1018 ret = clk_bulk_get(dev, num_clks, xcsi2rxss->clks); 1019 if (ret) 1020 return ret; 1021 1022 /* TODO: Enable/disable clocks at stream on/off time. */ 1023 ret = clk_bulk_prepare_enable(num_clks, xcsi2rxss->clks); 1024 if (ret) 1025 goto err_clk_put; 1026 1027 mutex_init(&xcsi2rxss->lock); 1028 1029 xcsi2rxss_hard_reset(xcsi2rxss); 1030 xcsi2rxss_soft_reset(xcsi2rxss); 1031 1032 /* Initialize V4L2 subdevice and media entity */ 1033 xcsi2rxss->pads[XVIP_PAD_SINK].flags = MEDIA_PAD_FL_SINK; 1034 xcsi2rxss->pads[XVIP_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; 1035 1036 /* Initialize the default format */ 1037 xcsi2rxss->default_format.code = 1038 xcsi2rxss_get_nth_mbus(xcsi2rxss->datatype, 0); 1039 xcsi2rxss->default_format.field = V4L2_FIELD_NONE; 1040 xcsi2rxss->default_format.colorspace = V4L2_COLORSPACE_SRGB; 1041 xcsi2rxss->default_format.width = XCSI_DEFAULT_WIDTH; 1042 xcsi2rxss->default_format.height = XCSI_DEFAULT_HEIGHT; 1043 xcsi2rxss->format = xcsi2rxss->default_format; 1044 1045 /* Initialize V4L2 subdevice and media entity */ 1046 subdev = &xcsi2rxss->subdev; 1047 v4l2_subdev_init(subdev, &xcsi2rxss_ops); 1048 subdev->dev = dev; 1049 strscpy(subdev->name, dev_name(dev), sizeof(subdev->name)); 1050 subdev->flags |= V4L2_SUBDEV_FL_HAS_EVENTS | V4L2_SUBDEV_FL_HAS_DEVNODE; 1051 subdev->entity.ops = &xcsi2rxss_media_ops; 1052 v4l2_set_subdevdata(subdev, xcsi2rxss); 1053 1054 ret = media_entity_pads_init(&subdev->entity, XCSI_MEDIA_PADS, 1055 xcsi2rxss->pads); 1056 if (ret < 0) 1057 goto error; 1058 1059 platform_set_drvdata(pdev, xcsi2rxss); 1060 1061 ret = v4l2_async_register_subdev(subdev); 1062 if (ret < 0) { 1063 dev_err(dev, "failed to register subdev\n"); 1064 goto error; 1065 } 1066 1067 return 0; 1068error: 1069 media_entity_cleanup(&subdev->entity); 1070 mutex_destroy(&xcsi2rxss->lock); 1071 clk_bulk_disable_unprepare(num_clks, xcsi2rxss->clks); 1072err_clk_put: 1073 clk_bulk_put(num_clks, xcsi2rxss->clks); 1074 return ret; 1075} 1076 1077static int xcsi2rxss_remove(struct platform_device *pdev) 1078{ 1079 struct xcsi2rxss_state *xcsi2rxss = platform_get_drvdata(pdev); 1080 struct v4l2_subdev *subdev = &xcsi2rxss->subdev; 1081 int num_clks = ARRAY_SIZE(xcsi2rxss_clks); 1082 1083 v4l2_async_unregister_subdev(subdev); 1084 media_entity_cleanup(&subdev->entity); 1085 mutex_destroy(&xcsi2rxss->lock); 1086 clk_bulk_disable_unprepare(num_clks, xcsi2rxss->clks); 1087 clk_bulk_put(num_clks, xcsi2rxss->clks); 1088 1089 return 0; 1090} 1091 1092static const struct of_device_id xcsi2rxss_of_id_table[] = { 1093 { .compatible = "xlnx,mipi-csi2-rx-subsystem-5.0", }, 1094 { } 1095}; 1096MODULE_DEVICE_TABLE(of, xcsi2rxss_of_id_table); 1097 1098static struct platform_driver xcsi2rxss_driver = { 1099 .driver = { 1100 .name = "xilinx-csi2rxss", 1101 .of_match_table = xcsi2rxss_of_id_table, 1102 }, 1103 .probe = xcsi2rxss_probe, 1104 .remove = xcsi2rxss_remove, 1105}; 1106 1107module_platform_driver(xcsi2rxss_driver); 1108 1109MODULE_AUTHOR("Vishal Sagar <vsagar@xilinx.com>"); 1110MODULE_DESCRIPTION("Xilinx MIPI CSI-2 Rx Subsystem Driver"); 1111MODULE_LICENSE("GPL v2"); 1112