1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Driver for MT9M001 CMOS Image Sensor from Micron
4 *
5 * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
6 */
7
8#include <linux/clk.h>
9#include <linux/delay.h>
10#include <linux/gpio/consumer.h>
11#include <linux/i2c.h>
12#include <linux/log2.h>
13#include <linux/module.h>
14#include <linux/pm_runtime.h>
15#include <linux/slab.h>
16#include <linux/videodev2.h>
17
18#include <media/v4l2-ctrls.h>
19#include <media/v4l2-device.h>
20#include <media/v4l2-event.h>
21#include <media/v4l2-subdev.h>
22
23/*
24 * mt9m001 i2c address 0x5d
25 */
26
27/* mt9m001 selected register addresses */
28#define MT9M001_CHIP_VERSION		0x00
29#define MT9M001_ROW_START		0x01
30#define MT9M001_COLUMN_START		0x02
31#define MT9M001_WINDOW_HEIGHT		0x03
32#define MT9M001_WINDOW_WIDTH		0x04
33#define MT9M001_HORIZONTAL_BLANKING	0x05
34#define MT9M001_VERTICAL_BLANKING	0x06
35#define MT9M001_OUTPUT_CONTROL		0x07
36#define MT9M001_SHUTTER_WIDTH		0x09
37#define MT9M001_FRAME_RESTART		0x0b
38#define MT9M001_SHUTTER_DELAY		0x0c
39#define MT9M001_RESET			0x0d
40#define MT9M001_READ_OPTIONS1		0x1e
41#define MT9M001_READ_OPTIONS2		0x20
42#define MT9M001_GLOBAL_GAIN		0x35
43#define MT9M001_CHIP_ENABLE		0xF1
44
45#define MT9M001_MAX_WIDTH		1280
46#define MT9M001_MAX_HEIGHT		1024
47#define MT9M001_MIN_WIDTH		48
48#define MT9M001_MIN_HEIGHT		32
49#define MT9M001_COLUMN_SKIP		20
50#define MT9M001_ROW_SKIP		12
51#define MT9M001_DEFAULT_HBLANK		9
52#define MT9M001_DEFAULT_VBLANK		25
53
54/* MT9M001 has only one fixed colorspace per pixelcode */
55struct mt9m001_datafmt {
56	u32	code;
57	enum v4l2_colorspace		colorspace;
58};
59
60/* Find a data format by a pixel code in an array */
61static const struct mt9m001_datafmt *mt9m001_find_datafmt(
62	u32 code, const struct mt9m001_datafmt *fmt,
63	int n)
64{
65	int i;
66	for (i = 0; i < n; i++)
67		if (fmt[i].code == code)
68			return fmt + i;
69
70	return NULL;
71}
72
73static const struct mt9m001_datafmt mt9m001_colour_fmts[] = {
74	/*
75	 * Order important: first natively supported,
76	 * second supported with a GPIO extender
77	 */
78	{MEDIA_BUS_FMT_SBGGR10_1X10, V4L2_COLORSPACE_SRGB},
79	{MEDIA_BUS_FMT_SBGGR8_1X8, V4L2_COLORSPACE_SRGB},
80};
81
82static const struct mt9m001_datafmt mt9m001_monochrome_fmts[] = {
83	/* Order important - see above */
84	{MEDIA_BUS_FMT_Y10_1X10, V4L2_COLORSPACE_JPEG},
85	{MEDIA_BUS_FMT_Y8_1X8, V4L2_COLORSPACE_JPEG},
86};
87
88struct mt9m001 {
89	struct v4l2_subdev subdev;
90	struct v4l2_ctrl_handler hdl;
91	struct {
92		/* exposure/auto-exposure cluster */
93		struct v4l2_ctrl *autoexposure;
94		struct v4l2_ctrl *exposure;
95	};
96	bool streaming;
97	struct mutex mutex;
98	struct v4l2_rect rect;	/* Sensor window */
99	struct clk *clk;
100	struct gpio_desc *standby_gpio;
101	struct gpio_desc *reset_gpio;
102	const struct mt9m001_datafmt *fmt;
103	const struct mt9m001_datafmt *fmts;
104	int num_fmts;
105	unsigned int total_h;
106	unsigned short y_skip_top;	/* Lines to skip at the top */
107	struct media_pad pad;
108};
109
110static struct mt9m001 *to_mt9m001(const struct i2c_client *client)
111{
112	return container_of(i2c_get_clientdata(client), struct mt9m001, subdev);
113}
114
115static int reg_read(struct i2c_client *client, const u8 reg)
116{
117	return i2c_smbus_read_word_swapped(client, reg);
118}
119
120static int reg_write(struct i2c_client *client, const u8 reg,
121		     const u16 data)
122{
123	return i2c_smbus_write_word_swapped(client, reg, data);
124}
125
126static int reg_set(struct i2c_client *client, const u8 reg,
127		   const u16 data)
128{
129	int ret;
130
131	ret = reg_read(client, reg);
132	if (ret < 0)
133		return ret;
134	return reg_write(client, reg, ret | data);
135}
136
137static int reg_clear(struct i2c_client *client, const u8 reg,
138		     const u16 data)
139{
140	int ret;
141
142	ret = reg_read(client, reg);
143	if (ret < 0)
144		return ret;
145	return reg_write(client, reg, ret & ~data);
146}
147
148struct mt9m001_reg {
149	u8 reg;
150	u16 data;
151};
152
153static int multi_reg_write(struct i2c_client *client,
154			   const struct mt9m001_reg *regs, int num)
155{
156	int i;
157
158	for (i = 0; i < num; i++) {
159		int ret = reg_write(client, regs[i].reg, regs[i].data);
160
161		if (ret)
162			return ret;
163	}
164
165	return 0;
166}
167
168static int mt9m001_init(struct i2c_client *client)
169{
170	static const struct mt9m001_reg init_regs[] = {
171		/*
172		 * Issue a soft reset. This returns all registers to their
173		 * default values.
174		 */
175		{ MT9M001_RESET, 1 },
176		{ MT9M001_RESET, 0 },
177		/* Disable chip, synchronous option update */
178		{ MT9M001_OUTPUT_CONTROL, 0 }
179	};
180
181	dev_dbg(&client->dev, "%s\n", __func__);
182
183	return multi_reg_write(client, init_regs, ARRAY_SIZE(init_regs));
184}
185
186static int mt9m001_apply_selection(struct v4l2_subdev *sd)
187{
188	struct i2c_client *client = v4l2_get_subdevdata(sd);
189	struct mt9m001 *mt9m001 = to_mt9m001(client);
190	const struct mt9m001_reg regs[] = {
191		/* Blanking and start values - default... */
192		{ MT9M001_HORIZONTAL_BLANKING, MT9M001_DEFAULT_HBLANK },
193		{ MT9M001_VERTICAL_BLANKING, MT9M001_DEFAULT_VBLANK },
194		/*
195		 * The caller provides a supported format, as verified per
196		 * call to .set_fmt(FORMAT_TRY).
197		 */
198		{ MT9M001_COLUMN_START, mt9m001->rect.left },
199		{ MT9M001_ROW_START, mt9m001->rect.top },
200		{ MT9M001_WINDOW_WIDTH, mt9m001->rect.width - 1 },
201		{ MT9M001_WINDOW_HEIGHT,
202			mt9m001->rect.height + mt9m001->y_skip_top - 1 },
203	};
204
205	return multi_reg_write(client, regs, ARRAY_SIZE(regs));
206}
207
208static int mt9m001_s_stream(struct v4l2_subdev *sd, int enable)
209{
210	struct i2c_client *client = v4l2_get_subdevdata(sd);
211	struct mt9m001 *mt9m001 = to_mt9m001(client);
212	int ret = 0;
213
214	mutex_lock(&mt9m001->mutex);
215
216	if (mt9m001->streaming == enable)
217		goto done;
218
219	if (enable) {
220		ret = pm_runtime_get_sync(&client->dev);
221		if (ret < 0)
222			goto put_unlock;
223
224		ret = mt9m001_apply_selection(sd);
225		if (ret)
226			goto put_unlock;
227
228		ret = __v4l2_ctrl_handler_setup(&mt9m001->hdl);
229		if (ret)
230			goto put_unlock;
231
232		/* Switch to master "normal" mode */
233		ret = reg_write(client, MT9M001_OUTPUT_CONTROL, 2);
234		if (ret < 0)
235			goto put_unlock;
236	} else {
237		/* Switch to master stop sensor readout */
238		reg_write(client, MT9M001_OUTPUT_CONTROL, 0);
239		pm_runtime_put(&client->dev);
240	}
241
242	mt9m001->streaming = enable;
243done:
244	mutex_unlock(&mt9m001->mutex);
245
246	return 0;
247
248put_unlock:
249	pm_runtime_put(&client->dev);
250	mutex_unlock(&mt9m001->mutex);
251
252	return ret;
253}
254
255static int mt9m001_set_selection(struct v4l2_subdev *sd,
256		struct v4l2_subdev_pad_config *cfg,
257		struct v4l2_subdev_selection *sel)
258{
259	struct i2c_client *client = v4l2_get_subdevdata(sd);
260	struct mt9m001 *mt9m001 = to_mt9m001(client);
261	struct v4l2_rect rect = sel->r;
262
263	if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE ||
264	    sel->target != V4L2_SEL_TGT_CROP)
265		return -EINVAL;
266
267	if (mt9m001->fmts == mt9m001_colour_fmts)
268		/*
269		 * Bayer format - even number of rows for simplicity,
270		 * but let the user play with the top row.
271		 */
272		rect.height = ALIGN(rect.height, 2);
273
274	/* Datasheet requirement: see register description */
275	rect.width = ALIGN(rect.width, 2);
276	rect.left = ALIGN(rect.left, 2);
277
278	rect.width = clamp_t(u32, rect.width, MT9M001_MIN_WIDTH,
279			MT9M001_MAX_WIDTH);
280	rect.left = clamp_t(u32, rect.left, MT9M001_COLUMN_SKIP,
281			MT9M001_COLUMN_SKIP + MT9M001_MAX_WIDTH - rect.width);
282
283	rect.height = clamp_t(u32, rect.height, MT9M001_MIN_HEIGHT,
284			MT9M001_MAX_HEIGHT);
285	rect.top = clamp_t(u32, rect.top, MT9M001_ROW_SKIP,
286			MT9M001_ROW_SKIP + MT9M001_MAX_HEIGHT - rect.height);
287
288	mt9m001->total_h = rect.height + mt9m001->y_skip_top +
289			   MT9M001_DEFAULT_VBLANK;
290
291	mt9m001->rect = rect;
292
293	return 0;
294}
295
296static int mt9m001_get_selection(struct v4l2_subdev *sd,
297		struct v4l2_subdev_pad_config *cfg,
298		struct v4l2_subdev_selection *sel)
299{
300	struct i2c_client *client = v4l2_get_subdevdata(sd);
301	struct mt9m001 *mt9m001 = to_mt9m001(client);
302
303	if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
304		return -EINVAL;
305
306	switch (sel->target) {
307	case V4L2_SEL_TGT_CROP_BOUNDS:
308		sel->r.left = MT9M001_COLUMN_SKIP;
309		sel->r.top = MT9M001_ROW_SKIP;
310		sel->r.width = MT9M001_MAX_WIDTH;
311		sel->r.height = MT9M001_MAX_HEIGHT;
312		return 0;
313	case V4L2_SEL_TGT_CROP:
314		sel->r = mt9m001->rect;
315		return 0;
316	default:
317		return -EINVAL;
318	}
319}
320
321static int mt9m001_get_fmt(struct v4l2_subdev *sd,
322		struct v4l2_subdev_pad_config *cfg,
323		struct v4l2_subdev_format *format)
324{
325	struct i2c_client *client = v4l2_get_subdevdata(sd);
326	struct mt9m001 *mt9m001 = to_mt9m001(client);
327	struct v4l2_mbus_framefmt *mf = &format->format;
328
329	if (format->pad)
330		return -EINVAL;
331
332	if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
333		mf = v4l2_subdev_get_try_format(sd, cfg, 0);
334		format->format = *mf;
335		return 0;
336	}
337
338	mf->width	= mt9m001->rect.width;
339	mf->height	= mt9m001->rect.height;
340	mf->code	= mt9m001->fmt->code;
341	mf->colorspace	= mt9m001->fmt->colorspace;
342	mf->field	= V4L2_FIELD_NONE;
343	mf->ycbcr_enc	= V4L2_YCBCR_ENC_DEFAULT;
344	mf->quantization = V4L2_QUANTIZATION_DEFAULT;
345	mf->xfer_func	= V4L2_XFER_FUNC_DEFAULT;
346
347	return 0;
348}
349
350static int mt9m001_s_fmt(struct v4l2_subdev *sd,
351			 const struct mt9m001_datafmt *fmt,
352			 struct v4l2_mbus_framefmt *mf)
353{
354	struct i2c_client *client = v4l2_get_subdevdata(sd);
355	struct mt9m001 *mt9m001 = to_mt9m001(client);
356	struct v4l2_subdev_selection sel = {
357		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
358		.target = V4L2_SEL_TGT_CROP,
359		.r.left = mt9m001->rect.left,
360		.r.top = mt9m001->rect.top,
361		.r.width = mf->width,
362		.r.height = mf->height,
363	};
364	int ret;
365
366	/* No support for scaling so far, just crop. TODO: use skipping */
367	ret = mt9m001_set_selection(sd, NULL, &sel);
368	if (!ret) {
369		mf->width	= mt9m001->rect.width;
370		mf->height	= mt9m001->rect.height;
371		mt9m001->fmt	= fmt;
372		mf->colorspace	= fmt->colorspace;
373	}
374
375	return ret;
376}
377
378static int mt9m001_set_fmt(struct v4l2_subdev *sd,
379		struct v4l2_subdev_pad_config *cfg,
380		struct v4l2_subdev_format *format)
381{
382	struct v4l2_mbus_framefmt *mf = &format->format;
383	struct i2c_client *client = v4l2_get_subdevdata(sd);
384	struct mt9m001 *mt9m001 = to_mt9m001(client);
385	const struct mt9m001_datafmt *fmt;
386
387	if (format->pad)
388		return -EINVAL;
389
390	v4l_bound_align_image(&mf->width, MT9M001_MIN_WIDTH,
391		MT9M001_MAX_WIDTH, 1,
392		&mf->height, MT9M001_MIN_HEIGHT + mt9m001->y_skip_top,
393		MT9M001_MAX_HEIGHT + mt9m001->y_skip_top, 0, 0);
394
395	if (mt9m001->fmts == mt9m001_colour_fmts)
396		mf->height = ALIGN(mf->height - 1, 2);
397
398	fmt = mt9m001_find_datafmt(mf->code, mt9m001->fmts,
399				   mt9m001->num_fmts);
400	if (!fmt) {
401		fmt = mt9m001->fmt;
402		mf->code = fmt->code;
403	}
404
405	mf->colorspace	= fmt->colorspace;
406	mf->field	= V4L2_FIELD_NONE;
407	mf->ycbcr_enc	= V4L2_YCBCR_ENC_DEFAULT;
408	mf->quantization = V4L2_QUANTIZATION_DEFAULT;
409	mf->xfer_func	= V4L2_XFER_FUNC_DEFAULT;
410
411	if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
412		return mt9m001_s_fmt(sd, fmt, mf);
413	cfg->try_fmt = *mf;
414	return 0;
415}
416
417#ifdef CONFIG_VIDEO_ADV_DEBUG
418static int mt9m001_g_register(struct v4l2_subdev *sd,
419			      struct v4l2_dbg_register *reg)
420{
421	struct i2c_client *client = v4l2_get_subdevdata(sd);
422
423	if (reg->reg > 0xff)
424		return -EINVAL;
425
426	reg->size = 2;
427	reg->val = reg_read(client, reg->reg);
428
429	if (reg->val > 0xffff)
430		return -EIO;
431
432	return 0;
433}
434
435static int mt9m001_s_register(struct v4l2_subdev *sd,
436			      const struct v4l2_dbg_register *reg)
437{
438	struct i2c_client *client = v4l2_get_subdevdata(sd);
439
440	if (reg->reg > 0xff)
441		return -EINVAL;
442
443	if (reg_write(client, reg->reg, reg->val) < 0)
444		return -EIO;
445
446	return 0;
447}
448#endif
449
450static int mt9m001_power_on(struct device *dev)
451{
452	struct i2c_client *client = to_i2c_client(dev);
453	struct mt9m001 *mt9m001 = to_mt9m001(client);
454	int ret;
455
456	ret = clk_prepare_enable(mt9m001->clk);
457	if (ret)
458		return ret;
459
460	if (mt9m001->standby_gpio) {
461		gpiod_set_value_cansleep(mt9m001->standby_gpio, 0);
462		usleep_range(1000, 2000);
463	}
464
465	if (mt9m001->reset_gpio) {
466		gpiod_set_value_cansleep(mt9m001->reset_gpio, 1);
467		usleep_range(1000, 2000);
468		gpiod_set_value_cansleep(mt9m001->reset_gpio, 0);
469		usleep_range(1000, 2000);
470	}
471
472	return 0;
473}
474
475static int mt9m001_power_off(struct device *dev)
476{
477	struct i2c_client *client = to_i2c_client(dev);
478	struct mt9m001 *mt9m001 = to_mt9m001(client);
479
480	gpiod_set_value_cansleep(mt9m001->standby_gpio, 1);
481	clk_disable_unprepare(mt9m001->clk);
482
483	return 0;
484}
485
486static int mt9m001_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
487{
488	struct mt9m001 *mt9m001 = container_of(ctrl->handler,
489					       struct mt9m001, hdl);
490	s32 min, max;
491
492	switch (ctrl->id) {
493	case V4L2_CID_EXPOSURE_AUTO:
494		min = mt9m001->exposure->minimum;
495		max = mt9m001->exposure->maximum;
496		mt9m001->exposure->val =
497			(524 + (mt9m001->total_h - 1) * (max - min)) / 1048 + min;
498		break;
499	}
500	return 0;
501}
502
503static int mt9m001_s_ctrl(struct v4l2_ctrl *ctrl)
504{
505	struct mt9m001 *mt9m001 = container_of(ctrl->handler,
506					       struct mt9m001, hdl);
507	struct v4l2_subdev *sd = &mt9m001->subdev;
508	struct i2c_client *client = v4l2_get_subdevdata(sd);
509	struct v4l2_ctrl *exp = mt9m001->exposure;
510	int data;
511	int ret;
512
513	if (!pm_runtime_get_if_in_use(&client->dev))
514		return 0;
515
516	switch (ctrl->id) {
517	case V4L2_CID_VFLIP:
518		if (ctrl->val)
519			ret = reg_set(client, MT9M001_READ_OPTIONS2, 0x8000);
520		else
521			ret = reg_clear(client, MT9M001_READ_OPTIONS2, 0x8000);
522		break;
523
524	case V4L2_CID_GAIN:
525		/* See Datasheet Table 7, Gain settings. */
526		if (ctrl->val <= ctrl->default_value) {
527			/* Pack it into 0..1 step 0.125, register values 0..8 */
528			unsigned long range = ctrl->default_value - ctrl->minimum;
529			data = ((ctrl->val - (s32)ctrl->minimum) * 8 + range / 2) / range;
530
531			dev_dbg(&client->dev, "Setting gain %d\n", data);
532			ret = reg_write(client, MT9M001_GLOBAL_GAIN, data);
533		} else {
534			/* Pack it into 1.125..15 variable step, register values 9..67 */
535			/* We assume qctrl->maximum - qctrl->default_value - 1 > 0 */
536			unsigned long range = ctrl->maximum - ctrl->default_value - 1;
537			unsigned long gain = ((ctrl->val - (s32)ctrl->default_value - 1) *
538					       111 + range / 2) / range + 9;
539
540			if (gain <= 32)
541				data = gain;
542			else if (gain <= 64)
543				data = ((gain - 32) * 16 + 16) / 32 + 80;
544			else
545				data = ((gain - 64) * 7 + 28) / 56 + 96;
546
547			dev_dbg(&client->dev, "Setting gain from %d to %d\n",
548				 reg_read(client, MT9M001_GLOBAL_GAIN), data);
549			ret = reg_write(client, MT9M001_GLOBAL_GAIN, data);
550		}
551		break;
552
553	case V4L2_CID_EXPOSURE_AUTO:
554		if (ctrl->val == V4L2_EXPOSURE_MANUAL) {
555			unsigned long range = exp->maximum - exp->minimum;
556			unsigned long shutter = ((exp->val - (s32)exp->minimum) * 1048 +
557						 range / 2) / range + 1;
558
559			dev_dbg(&client->dev,
560				"Setting shutter width from %d to %lu\n",
561				reg_read(client, MT9M001_SHUTTER_WIDTH), shutter);
562			ret = reg_write(client, MT9M001_SHUTTER_WIDTH, shutter);
563		} else {
564			mt9m001->total_h = mt9m001->rect.height +
565				mt9m001->y_skip_top + MT9M001_DEFAULT_VBLANK;
566			ret = reg_write(client, MT9M001_SHUTTER_WIDTH,
567					mt9m001->total_h);
568		}
569		break;
570	default:
571		ret = -EINVAL;
572		break;
573	}
574
575	pm_runtime_put(&client->dev);
576
577	return ret;
578}
579
580/*
581 * Interface active, can use i2c. If it fails, it can indeed mean, that
582 * this wasn't our capture interface, so, we wait for the right one
583 */
584static int mt9m001_video_probe(struct i2c_client *client)
585{
586	struct mt9m001 *mt9m001 = to_mt9m001(client);
587	s32 data;
588	int ret;
589
590	/* Enable the chip */
591	data = reg_write(client, MT9M001_CHIP_ENABLE, 1);
592	dev_dbg(&client->dev, "write: %d\n", data);
593
594	/* Read out the chip version register */
595	data = reg_read(client, MT9M001_CHIP_VERSION);
596
597	/* must be 0x8411 or 0x8421 for colour sensor and 8431 for bw */
598	switch (data) {
599	case 0x8411:
600	case 0x8421:
601		mt9m001->fmts = mt9m001_colour_fmts;
602		mt9m001->num_fmts = ARRAY_SIZE(mt9m001_colour_fmts);
603		break;
604	case 0x8431:
605		mt9m001->fmts = mt9m001_monochrome_fmts;
606		mt9m001->num_fmts = ARRAY_SIZE(mt9m001_monochrome_fmts);
607		break;
608	default:
609		dev_err(&client->dev,
610			"No MT9M001 chip detected, register read %x\n", data);
611		ret = -ENODEV;
612		goto done;
613	}
614
615	mt9m001->fmt = &mt9m001->fmts[0];
616
617	dev_info(&client->dev, "Detected a MT9M001 chip ID %x (%s)\n", data,
618		 data == 0x8431 ? "C12STM" : "C12ST");
619
620	ret = mt9m001_init(client);
621	if (ret < 0) {
622		dev_err(&client->dev, "Failed to initialise the camera\n");
623		goto done;
624	}
625
626	/* mt9m001_init() has reset the chip, returning registers to defaults */
627	ret = v4l2_ctrl_handler_setup(&mt9m001->hdl);
628
629done:
630	return ret;
631}
632
633static int mt9m001_g_skip_top_lines(struct v4l2_subdev *sd, u32 *lines)
634{
635	struct i2c_client *client = v4l2_get_subdevdata(sd);
636	struct mt9m001 *mt9m001 = to_mt9m001(client);
637
638	*lines = mt9m001->y_skip_top;
639
640	return 0;
641}
642
643static const struct v4l2_ctrl_ops mt9m001_ctrl_ops = {
644	.g_volatile_ctrl = mt9m001_g_volatile_ctrl,
645	.s_ctrl = mt9m001_s_ctrl,
646};
647
648static const struct v4l2_subdev_core_ops mt9m001_subdev_core_ops = {
649	.log_status = v4l2_ctrl_subdev_log_status,
650	.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
651	.unsubscribe_event = v4l2_event_subdev_unsubscribe,
652#ifdef CONFIG_VIDEO_ADV_DEBUG
653	.g_register	= mt9m001_g_register,
654	.s_register	= mt9m001_s_register,
655#endif
656};
657
658static int mt9m001_init_cfg(struct v4l2_subdev *sd,
659			    struct v4l2_subdev_pad_config *cfg)
660{
661	struct i2c_client *client = v4l2_get_subdevdata(sd);
662	struct mt9m001 *mt9m001 = to_mt9m001(client);
663	struct v4l2_mbus_framefmt *try_fmt =
664		v4l2_subdev_get_try_format(sd, cfg, 0);
665
666	try_fmt->width		= MT9M001_MAX_WIDTH;
667	try_fmt->height		= MT9M001_MAX_HEIGHT;
668	try_fmt->code		= mt9m001->fmts[0].code;
669	try_fmt->colorspace	= mt9m001->fmts[0].colorspace;
670	try_fmt->field		= V4L2_FIELD_NONE;
671	try_fmt->ycbcr_enc	= V4L2_YCBCR_ENC_DEFAULT;
672	try_fmt->quantization	= V4L2_QUANTIZATION_DEFAULT;
673	try_fmt->xfer_func	= V4L2_XFER_FUNC_DEFAULT;
674
675	return 0;
676}
677
678static int mt9m001_enum_mbus_code(struct v4l2_subdev *sd,
679		struct v4l2_subdev_pad_config *cfg,
680		struct v4l2_subdev_mbus_code_enum *code)
681{
682	struct i2c_client *client = v4l2_get_subdevdata(sd);
683	struct mt9m001 *mt9m001 = to_mt9m001(client);
684
685	if (code->pad || code->index >= mt9m001->num_fmts)
686		return -EINVAL;
687
688	code->code = mt9m001->fmts[code->index].code;
689	return 0;
690}
691
692static int mt9m001_get_mbus_config(struct v4l2_subdev *sd,
693				   unsigned int pad,
694				   struct v4l2_mbus_config *cfg)
695{
696	/* MT9M001 has all capture_format parameters fixed */
697	cfg->flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
698		V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_HIGH |
699		V4L2_MBUS_DATA_ACTIVE_HIGH | V4L2_MBUS_MASTER;
700	cfg->type = V4L2_MBUS_PARALLEL;
701
702	return 0;
703}
704
705static const struct v4l2_subdev_video_ops mt9m001_subdev_video_ops = {
706	.s_stream	= mt9m001_s_stream,
707};
708
709static const struct v4l2_subdev_sensor_ops mt9m001_subdev_sensor_ops = {
710	.g_skip_top_lines	= mt9m001_g_skip_top_lines,
711};
712
713static const struct v4l2_subdev_pad_ops mt9m001_subdev_pad_ops = {
714	.init_cfg	= mt9m001_init_cfg,
715	.enum_mbus_code = mt9m001_enum_mbus_code,
716	.get_selection	= mt9m001_get_selection,
717	.set_selection	= mt9m001_set_selection,
718	.get_fmt	= mt9m001_get_fmt,
719	.set_fmt	= mt9m001_set_fmt,
720	.get_mbus_config = mt9m001_get_mbus_config,
721};
722
723static const struct v4l2_subdev_ops mt9m001_subdev_ops = {
724	.core	= &mt9m001_subdev_core_ops,
725	.video	= &mt9m001_subdev_video_ops,
726	.sensor	= &mt9m001_subdev_sensor_ops,
727	.pad	= &mt9m001_subdev_pad_ops,
728};
729
730static int mt9m001_probe(struct i2c_client *client)
731{
732	struct mt9m001 *mt9m001;
733	struct i2c_adapter *adapter = client->adapter;
734	int ret;
735
736	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) {
737		dev_warn(&adapter->dev,
738			 "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n");
739		return -EIO;
740	}
741
742	mt9m001 = devm_kzalloc(&client->dev, sizeof(*mt9m001), GFP_KERNEL);
743	if (!mt9m001)
744		return -ENOMEM;
745
746	mt9m001->clk = devm_clk_get(&client->dev, NULL);
747	if (IS_ERR(mt9m001->clk))
748		return PTR_ERR(mt9m001->clk);
749
750	mt9m001->standby_gpio = devm_gpiod_get_optional(&client->dev, "standby",
751							GPIOD_OUT_LOW);
752	if (IS_ERR(mt9m001->standby_gpio))
753		return PTR_ERR(mt9m001->standby_gpio);
754
755	mt9m001->reset_gpio = devm_gpiod_get_optional(&client->dev, "reset",
756						      GPIOD_OUT_LOW);
757	if (IS_ERR(mt9m001->reset_gpio))
758		return PTR_ERR(mt9m001->reset_gpio);
759
760	v4l2_i2c_subdev_init(&mt9m001->subdev, client, &mt9m001_subdev_ops);
761	mt9m001->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
762				 V4L2_SUBDEV_FL_HAS_EVENTS;
763	v4l2_ctrl_handler_init(&mt9m001->hdl, 4);
764	v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops,
765			V4L2_CID_VFLIP, 0, 1, 1, 0);
766	v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops,
767			V4L2_CID_GAIN, 0, 127, 1, 64);
768	mt9m001->exposure = v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops,
769			V4L2_CID_EXPOSURE, 1, 255, 1, 255);
770	/*
771	 * Simulated autoexposure. If enabled, we calculate shutter width
772	 * ourselves in the driver based on vertical blanking and frame width
773	 */
774	mt9m001->autoexposure = v4l2_ctrl_new_std_menu(&mt9m001->hdl,
775			&mt9m001_ctrl_ops, V4L2_CID_EXPOSURE_AUTO, 1, 0,
776			V4L2_EXPOSURE_AUTO);
777	mt9m001->subdev.ctrl_handler = &mt9m001->hdl;
778	if (mt9m001->hdl.error)
779		return mt9m001->hdl.error;
780
781	v4l2_ctrl_auto_cluster(2, &mt9m001->autoexposure,
782					V4L2_EXPOSURE_MANUAL, true);
783
784	mutex_init(&mt9m001->mutex);
785	mt9m001->hdl.lock = &mt9m001->mutex;
786
787	/* Second stage probe - when a capture adapter is there */
788	mt9m001->y_skip_top	= 0;
789	mt9m001->rect.left	= MT9M001_COLUMN_SKIP;
790	mt9m001->rect.top	= MT9M001_ROW_SKIP;
791	mt9m001->rect.width	= MT9M001_MAX_WIDTH;
792	mt9m001->rect.height	= MT9M001_MAX_HEIGHT;
793
794	ret = mt9m001_power_on(&client->dev);
795	if (ret)
796		goto error_hdl_free;
797
798	pm_runtime_set_active(&client->dev);
799	pm_runtime_enable(&client->dev);
800
801	ret = mt9m001_video_probe(client);
802	if (ret)
803		goto error_power_off;
804
805	mt9m001->pad.flags = MEDIA_PAD_FL_SOURCE;
806	mt9m001->subdev.entity.function = MEDIA_ENT_F_CAM_SENSOR;
807	ret = media_entity_pads_init(&mt9m001->subdev.entity, 1, &mt9m001->pad);
808	if (ret)
809		goto error_power_off;
810
811	ret = v4l2_async_register_subdev(&mt9m001->subdev);
812	if (ret)
813		goto error_entity_cleanup;
814
815	pm_runtime_idle(&client->dev);
816
817	return 0;
818
819error_entity_cleanup:
820	media_entity_cleanup(&mt9m001->subdev.entity);
821error_power_off:
822	pm_runtime_disable(&client->dev);
823	pm_runtime_set_suspended(&client->dev);
824	mt9m001_power_off(&client->dev);
825
826error_hdl_free:
827	v4l2_ctrl_handler_free(&mt9m001->hdl);
828	mutex_destroy(&mt9m001->mutex);
829
830	return ret;
831}
832
833static int mt9m001_remove(struct i2c_client *client)
834{
835	struct mt9m001 *mt9m001 = to_mt9m001(client);
836
837	pm_runtime_get_sync(&client->dev);
838
839	v4l2_async_unregister_subdev(&mt9m001->subdev);
840	media_entity_cleanup(&mt9m001->subdev.entity);
841
842	pm_runtime_disable(&client->dev);
843	pm_runtime_set_suspended(&client->dev);
844	pm_runtime_put_noidle(&client->dev);
845	mt9m001_power_off(&client->dev);
846
847	v4l2_ctrl_handler_free(&mt9m001->hdl);
848	mutex_destroy(&mt9m001->mutex);
849
850	return 0;
851}
852
853static const struct i2c_device_id mt9m001_id[] = {
854	{ "mt9m001", 0 },
855	{ }
856};
857MODULE_DEVICE_TABLE(i2c, mt9m001_id);
858
859static const struct dev_pm_ops mt9m001_pm_ops = {
860	SET_RUNTIME_PM_OPS(mt9m001_power_off, mt9m001_power_on, NULL)
861};
862
863static const struct of_device_id mt9m001_of_match[] = {
864	{ .compatible = "onnn,mt9m001", },
865	{ /* sentinel */ },
866};
867MODULE_DEVICE_TABLE(of, mt9m001_of_match);
868
869static struct i2c_driver mt9m001_i2c_driver = {
870	.driver = {
871		.name = "mt9m001",
872		.pm = &mt9m001_pm_ops,
873		.of_match_table = mt9m001_of_match,
874	},
875	.probe_new	= mt9m001_probe,
876	.remove		= mt9m001_remove,
877	.id_table	= mt9m001_id,
878};
879
880module_i2c_driver(mt9m001_i2c_driver);
881
882MODULE_DESCRIPTION("Micron MT9M001 Camera driver");
883MODULE_AUTHOR("Guennadi Liakhovetski <kernel@pengutronix.de>");
884MODULE_LICENSE("GPL v2");
885