1/* SPDX-License-Identifier: GPL-2.0-or-later */
2/*
3	STB0899 Multistandard Frontend driver
4	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
5
6	Copyright (C) ST Microelectronics
7
8*/
9
10#ifndef __STB0899_DRV_H
11#define __STB0899_DRV_H
12
13#include <linux/kernel.h>
14#include <linux/module.h>
15
16#include <media/dvb_frontend.h>
17
18#define STB0899_TSMODE_SERIAL		1
19#define STB0899_CLKPOL_FALLING		2
20#define STB0899_CLKNULL_PARITY		3
21#define STB0899_SYNC_FORCED		4
22#define STB0899_FECMODE_DSS		5
23
24struct stb0899_s1_reg {
25	u16	address;
26	u8	data;
27};
28
29struct stb0899_s2_reg {
30	u16	offset;
31	u32	base_address;
32	u32	data;
33};
34
35enum stb0899_inversion {
36	IQ_SWAP_OFF	= +1, /* inversion affects the sign of e. g. */
37	IQ_SWAP_ON	= -1, /* the derotator frequency register    */
38};
39
40#define STB0899_GPIO00				0xf140
41#define STB0899_GPIO01				0xf141
42#define STB0899_GPIO02				0xf142
43#define STB0899_GPIO03				0xf143
44#define STB0899_GPIO04				0xf144
45#define STB0899_GPIO05				0xf145
46#define STB0899_GPIO06				0xf146
47#define STB0899_GPIO07				0xf147
48#define STB0899_GPIO08				0xf148
49#define STB0899_GPIO09				0xf149
50#define STB0899_GPIO10				0xf14a
51#define STB0899_GPIO11				0xf14b
52#define STB0899_GPIO12				0xf14c
53#define STB0899_GPIO13				0xf14d
54#define STB0899_GPIO14				0xf14e
55#define STB0899_GPIO15				0xf14f
56#define STB0899_GPIO16				0xf150
57#define STB0899_GPIO17				0xf151
58#define STB0899_GPIO18				0xf152
59#define STB0899_GPIO19				0xf153
60#define STB0899_GPIO20				0xf154
61
62#define STB0899_GPIOPULLUP			0x01 /* Output device is connected to Vdd */
63#define STB0899_GPIOPULLDN			0x00 /* Output device is connected to Vss */
64
65#define STB0899_POSTPROC_GPIO_POWER		0x00
66#define STB0899_POSTPROC_GPIO_LOCK		0x01
67
68/*
69 * Post process output configuration control
70 * 1. POWER ON/OFF		(index 0)
71 * 2. FE_HAS_LOCK/LOCK_LOSS	(index 1)
72 *
73 * @gpio	= one of the above listed GPIO's
74 * @level	= output state: pulled up or low
75 */
76struct stb0899_postproc {
77	u16	gpio;
78	u8	level;
79};
80
81struct stb0899_config {
82	const struct stb0899_s1_reg	*init_dev;
83	const struct stb0899_s2_reg	*init_s2_demod;
84	const struct stb0899_s1_reg	*init_s1_demod;
85	const struct stb0899_s2_reg	*init_s2_fec;
86	const struct stb0899_s1_reg	*init_tst;
87
88	const struct stb0899_postproc	*postproc;
89
90	enum stb0899_inversion		inversion;
91
92	u32	xtal_freq;
93
94	u8	demod_address;
95	u8	ts_output_mode;
96	u8	block_sync_mode;
97	u8	ts_pfbit_toggle;
98
99	u8	clock_polarity;
100	u8	data_clk_parity;
101	u8	fec_mode;
102	u8	data_output_ctl;
103	u8	data_fifo_mode;
104	u8	out_rate_comp;
105	u8	i2c_repeater;
106//	int	inversion;
107	int	lo_clk;
108	int	hi_clk;
109
110	u32	esno_ave;
111	u32	esno_quant;
112	u32	avframes_coarse;
113	u32	avframes_fine;
114	u32	miss_threshold;
115	u32	uwp_threshold_acq;
116	u32	uwp_threshold_track;
117	u32	uwp_threshold_sof;
118	u32	sof_search_timeout;
119
120	u32	btr_nco_bits;
121	u32	btr_gain_shift_offset;
122	u32	crl_nco_bits;
123	u32	ldpc_max_iter;
124
125	int (*tuner_set_frequency)(struct dvb_frontend *fe, u32 frequency);
126	int (*tuner_get_frequency)(struct dvb_frontend *fe, u32 *frequency);
127	int (*tuner_set_bandwidth)(struct dvb_frontend *fe, u32 bandwidth);
128	int (*tuner_get_bandwidth)(struct dvb_frontend *fe, u32 *bandwidth);
129	int (*tuner_set_rfsiggain)(struct dvb_frontend *fe, u32 rf_gain);
130};
131
132#if IS_REACHABLE(CONFIG_DVB_STB0899)
133
134extern struct dvb_frontend *stb0899_attach(struct stb0899_config *config,
135					   struct i2c_adapter *i2c);
136
137#else
138
139static inline struct dvb_frontend *stb0899_attach(struct stb0899_config *config,
140						  struct i2c_adapter *i2c)
141{
142	printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__);
143	return NULL;
144}
145
146#endif //CONFIG_DVB_STB0899
147
148
149#endif
150