1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * Driver for 4 * Samsung S5H1420 and 5 * PnpNetwork PN1010 QPSK Demodulator 6 * 7 * Copyright (C) 2005 Andrew de Quincey <adq_dvb@lidskialf.net> 8 * Copyright (C) 2005-8 Patrick Boettcher <pb@linuxtv.org> 9 */ 10 11#include <linux/kernel.h> 12#include <linux/module.h> 13#include <linux/init.h> 14#include <linux/string.h> 15#include <linux/slab.h> 16#include <linux/delay.h> 17#include <linux/jiffies.h> 18#include <asm/div64.h> 19 20#include <linux/i2c.h> 21 22 23#include <media/dvb_frontend.h> 24#include "s5h1420.h" 25#include "s5h1420_priv.h" 26 27#define TONE_FREQ 22000 28 29struct s5h1420_state { 30 struct i2c_adapter* i2c; 31 const struct s5h1420_config* config; 32 33 struct dvb_frontend frontend; 34 struct i2c_adapter tuner_i2c_adapter; 35 36 u8 CON_1_val; 37 38 u8 postlocked:1; 39 u32 fclk; 40 u32 tunedfreq; 41 enum fe_code_rate fec_inner; 42 u32 symbol_rate; 43 44 /* FIXME: ugly workaround for flexcop's incapable i2c-controller 45 * it does not support repeated-start, workaround: write addr-1 46 * and then read 47 */ 48 u8 shadow[256]; 49}; 50 51static u32 s5h1420_getsymbolrate(struct s5h1420_state* state); 52static int s5h1420_get_tune_settings(struct dvb_frontend* fe, 53 struct dvb_frontend_tune_settings* fesettings); 54 55 56static int debug; 57module_param(debug, int, 0644); 58MODULE_PARM_DESC(debug, "enable debugging"); 59 60#define dprintk(x...) do { \ 61 if (debug) \ 62 printk(KERN_DEBUG "S5H1420: " x); \ 63} while (0) 64 65static u8 s5h1420_readreg(struct s5h1420_state *state, u8 reg) 66{ 67 int ret; 68 u8 b[2]; 69 struct i2c_msg msg[] = { 70 { .addr = state->config->demod_address, .flags = 0, .buf = b, .len = 2 }, 71 { .addr = state->config->demod_address, .flags = 0, .buf = ®, .len = 1 }, 72 { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b, .len = 1 }, 73 }; 74 75 b[0] = (reg - 1) & 0xff; 76 b[1] = state->shadow[(reg - 1) & 0xff]; 77 78 if (state->config->repeated_start_workaround) { 79 ret = i2c_transfer(state->i2c, msg, 3); 80 if (ret != 3) 81 return ret; 82 } else { 83 ret = i2c_transfer(state->i2c, &msg[1], 1); 84 if (ret != 1) 85 return ret; 86 ret = i2c_transfer(state->i2c, &msg[2], 1); 87 if (ret != 1) 88 return ret; 89 } 90 91 /* dprintk("rd(%02x): %02x %02x\n", state->config->demod_address, reg, b[0]); */ 92 93 return b[0]; 94} 95 96static int s5h1420_writereg (struct s5h1420_state* state, u8 reg, u8 data) 97{ 98 u8 buf[] = { reg, data }; 99 struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 }; 100 int err; 101 102 /* dprintk("wr(%02x): %02x %02x\n", state->config->demod_address, reg, data); */ 103 err = i2c_transfer(state->i2c, &msg, 1); 104 if (err != 1) { 105 dprintk("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __func__, err, reg, data); 106 return -EREMOTEIO; 107 } 108 state->shadow[reg] = data; 109 110 return 0; 111} 112 113static int s5h1420_set_voltage(struct dvb_frontend *fe, 114 enum fe_sec_voltage voltage) 115{ 116 struct s5h1420_state* state = fe->demodulator_priv; 117 118 dprintk("enter %s\n", __func__); 119 120 switch(voltage) { 121 case SEC_VOLTAGE_13: 122 s5h1420_writereg(state, 0x3c, 123 (s5h1420_readreg(state, 0x3c) & 0xfe) | 0x02); 124 break; 125 126 case SEC_VOLTAGE_18: 127 s5h1420_writereg(state, 0x3c, s5h1420_readreg(state, 0x3c) | 0x03); 128 break; 129 130 case SEC_VOLTAGE_OFF: 131 s5h1420_writereg(state, 0x3c, s5h1420_readreg(state, 0x3c) & 0xfd); 132 break; 133 } 134 135 dprintk("leave %s\n", __func__); 136 return 0; 137} 138 139static int s5h1420_set_tone(struct dvb_frontend *fe, 140 enum fe_sec_tone_mode tone) 141{ 142 struct s5h1420_state* state = fe->demodulator_priv; 143 144 dprintk("enter %s\n", __func__); 145 switch(tone) { 146 case SEC_TONE_ON: 147 s5h1420_writereg(state, 0x3b, 148 (s5h1420_readreg(state, 0x3b) & 0x74) | 0x08); 149 break; 150 151 case SEC_TONE_OFF: 152 s5h1420_writereg(state, 0x3b, 153 (s5h1420_readreg(state, 0x3b) & 0x74) | 0x01); 154 break; 155 } 156 dprintk("leave %s\n", __func__); 157 158 return 0; 159} 160 161static int s5h1420_send_master_cmd (struct dvb_frontend* fe, 162 struct dvb_diseqc_master_cmd* cmd) 163{ 164 struct s5h1420_state* state = fe->demodulator_priv; 165 u8 val; 166 int i; 167 unsigned long timeout; 168 int result = 0; 169 170 dprintk("enter %s\n", __func__); 171 if (cmd->msg_len > sizeof(cmd->msg)) 172 return -EINVAL; 173 174 /* setup for DISEQC */ 175 val = s5h1420_readreg(state, 0x3b); 176 s5h1420_writereg(state, 0x3b, 0x02); 177 msleep(15); 178 179 /* write the DISEQC command bytes */ 180 for(i=0; i< cmd->msg_len; i++) { 181 s5h1420_writereg(state, 0x3d + i, cmd->msg[i]); 182 } 183 184 /* kick off transmission */ 185 s5h1420_writereg(state, 0x3b, s5h1420_readreg(state, 0x3b) | 186 ((cmd->msg_len-1) << 4) | 0x08); 187 188 /* wait for transmission to complete */ 189 timeout = jiffies + ((100*HZ) / 1000); 190 while(time_before(jiffies, timeout)) { 191 if (!(s5h1420_readreg(state, 0x3b) & 0x08)) 192 break; 193 194 msleep(5); 195 } 196 if (time_after(jiffies, timeout)) 197 result = -ETIMEDOUT; 198 199 /* restore original settings */ 200 s5h1420_writereg(state, 0x3b, val); 201 msleep(15); 202 dprintk("leave %s\n", __func__); 203 return result; 204} 205 206static int s5h1420_recv_slave_reply (struct dvb_frontend* fe, 207 struct dvb_diseqc_slave_reply* reply) 208{ 209 struct s5h1420_state* state = fe->demodulator_priv; 210 u8 val; 211 int i; 212 int length; 213 unsigned long timeout; 214 int result = 0; 215 216 /* setup for DISEQC receive */ 217 val = s5h1420_readreg(state, 0x3b); 218 s5h1420_writereg(state, 0x3b, 0x82); /* FIXME: guess - do we need to set DIS_RDY(0x08) in receive mode? */ 219 msleep(15); 220 221 /* wait for reception to complete */ 222 timeout = jiffies + ((reply->timeout*HZ) / 1000); 223 while(time_before(jiffies, timeout)) { 224 if (!(s5h1420_readreg(state, 0x3b) & 0x80)) /* FIXME: do we test DIS_RDY(0x08) or RCV_EN(0x80)? */ 225 break; 226 227 msleep(5); 228 } 229 if (time_after(jiffies, timeout)) { 230 result = -ETIMEDOUT; 231 goto exit; 232 } 233 234 /* check error flag - FIXME: not sure what this does - docs do not describe 235 * beyond "error flag for diseqc receive data :( */ 236 if (s5h1420_readreg(state, 0x49)) { 237 result = -EIO; 238 goto exit; 239 } 240 241 /* check length */ 242 length = (s5h1420_readreg(state, 0x3b) & 0x70) >> 4; 243 if (length > sizeof(reply->msg)) { 244 result = -EOVERFLOW; 245 goto exit; 246 } 247 reply->msg_len = length; 248 249 /* extract data */ 250 for(i=0; i< length; i++) { 251 reply->msg[i] = s5h1420_readreg(state, 0x3d + i); 252 } 253 254exit: 255 /* restore original settings */ 256 s5h1420_writereg(state, 0x3b, val); 257 msleep(15); 258 return result; 259} 260 261static int s5h1420_send_burst(struct dvb_frontend *fe, 262 enum fe_sec_mini_cmd minicmd) 263{ 264 struct s5h1420_state* state = fe->demodulator_priv; 265 u8 val; 266 int result = 0; 267 unsigned long timeout; 268 269 /* setup for tone burst */ 270 val = s5h1420_readreg(state, 0x3b); 271 s5h1420_writereg(state, 0x3b, (s5h1420_readreg(state, 0x3b) & 0x70) | 0x01); 272 273 /* set value for B position if requested */ 274 if (minicmd == SEC_MINI_B) { 275 s5h1420_writereg(state, 0x3b, s5h1420_readreg(state, 0x3b) | 0x04); 276 } 277 msleep(15); 278 279 /* start transmission */ 280 s5h1420_writereg(state, 0x3b, s5h1420_readreg(state, 0x3b) | 0x08); 281 282 /* wait for transmission to complete */ 283 timeout = jiffies + ((100*HZ) / 1000); 284 while(time_before(jiffies, timeout)) { 285 if (!(s5h1420_readreg(state, 0x3b) & 0x08)) 286 break; 287 288 msleep(5); 289 } 290 if (time_after(jiffies, timeout)) 291 result = -ETIMEDOUT; 292 293 /* restore original settings */ 294 s5h1420_writereg(state, 0x3b, val); 295 msleep(15); 296 return result; 297} 298 299static enum fe_status s5h1420_get_status_bits(struct s5h1420_state *state) 300{ 301 u8 val; 302 enum fe_status status = 0; 303 304 val = s5h1420_readreg(state, 0x14); 305 if (val & 0x02) 306 status |= FE_HAS_SIGNAL; 307 if (val & 0x01) 308 status |= FE_HAS_CARRIER; 309 val = s5h1420_readreg(state, 0x36); 310 if (val & 0x01) 311 status |= FE_HAS_VITERBI; 312 if (val & 0x20) 313 status |= FE_HAS_SYNC; 314 if (status == (FE_HAS_SIGNAL|FE_HAS_CARRIER|FE_HAS_VITERBI|FE_HAS_SYNC)) 315 status |= FE_HAS_LOCK; 316 317 return status; 318} 319 320static int s5h1420_read_status(struct dvb_frontend *fe, 321 enum fe_status *status) 322{ 323 struct s5h1420_state* state = fe->demodulator_priv; 324 u8 val; 325 326 dprintk("enter %s\n", __func__); 327 328 if (status == NULL) 329 return -EINVAL; 330 331 /* determine lock state */ 332 *status = s5h1420_get_status_bits(state); 333 334 /* fix for FEC 5/6 inversion issue - if it doesn't quite lock, invert 335 the inversion, wait a bit and check again */ 336 if (*status == (FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI)) { 337 val = s5h1420_readreg(state, Vit10); 338 if ((val & 0x07) == 0x03) { 339 if (val & 0x08) 340 s5h1420_writereg(state, Vit09, 0x13); 341 else 342 s5h1420_writereg(state, Vit09, 0x1b); 343 344 /* wait a bit then update lock status */ 345 mdelay(200); 346 *status = s5h1420_get_status_bits(state); 347 } 348 } 349 350 /* perform post lock setup */ 351 if ((*status & FE_HAS_LOCK) && !state->postlocked) { 352 353 /* calculate the data rate */ 354 u32 tmp = s5h1420_getsymbolrate(state); 355 switch (s5h1420_readreg(state, Vit10) & 0x07) { 356 case 0: tmp = (tmp * 2 * 1) / 2; break; 357 case 1: tmp = (tmp * 2 * 2) / 3; break; 358 case 2: tmp = (tmp * 2 * 3) / 4; break; 359 case 3: tmp = (tmp * 2 * 5) / 6; break; 360 case 4: tmp = (tmp * 2 * 6) / 7; break; 361 case 5: tmp = (tmp * 2 * 7) / 8; break; 362 } 363 364 if (tmp == 0) { 365 printk(KERN_ERR "s5h1420: avoided division by 0\n"); 366 tmp = 1; 367 } 368 tmp = state->fclk / tmp; 369 370 371 /* set the MPEG_CLK_INTL for the calculated data rate */ 372 if (tmp < 2) 373 val = 0x00; 374 else if (tmp < 5) 375 val = 0x01; 376 else if (tmp < 9) 377 val = 0x02; 378 else if (tmp < 13) 379 val = 0x03; 380 else if (tmp < 17) 381 val = 0x04; 382 else if (tmp < 25) 383 val = 0x05; 384 else if (tmp < 33) 385 val = 0x06; 386 else 387 val = 0x07; 388 dprintk("for MPEG_CLK_INTL %d %x\n", tmp, val); 389 390 s5h1420_writereg(state, FEC01, 0x18); 391 s5h1420_writereg(state, FEC01, 0x10); 392 s5h1420_writereg(state, FEC01, val); 393 394 /* Enable "MPEG_Out" */ 395 val = s5h1420_readreg(state, Mpeg02); 396 s5h1420_writereg(state, Mpeg02, val | (1 << 6)); 397 398 /* kicker disable */ 399 val = s5h1420_readreg(state, QPSK01) & 0x7f; 400 s5h1420_writereg(state, QPSK01, val); 401 402 /* DC freeze TODO it was never activated by default or it can stay activated */ 403 404 if (s5h1420_getsymbolrate(state) >= 20000000) { 405 s5h1420_writereg(state, Loop04, 0x8a); 406 s5h1420_writereg(state, Loop05, 0x6a); 407 } else { 408 s5h1420_writereg(state, Loop04, 0x58); 409 s5h1420_writereg(state, Loop05, 0x27); 410 } 411 412 /* post-lock processing has been done! */ 413 state->postlocked = 1; 414 } 415 416 dprintk("leave %s\n", __func__); 417 418 return 0; 419} 420 421static int s5h1420_read_ber(struct dvb_frontend* fe, u32* ber) 422{ 423 struct s5h1420_state* state = fe->demodulator_priv; 424 425 s5h1420_writereg(state, 0x46, 0x1d); 426 mdelay(25); 427 428 *ber = (s5h1420_readreg(state, 0x48) << 8) | s5h1420_readreg(state, 0x47); 429 430 return 0; 431} 432 433static int s5h1420_read_signal_strength(struct dvb_frontend* fe, u16* strength) 434{ 435 struct s5h1420_state* state = fe->demodulator_priv; 436 437 u8 val = s5h1420_readreg(state, 0x15); 438 439 *strength = (u16) ((val << 8) | val); 440 441 return 0; 442} 443 444static int s5h1420_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) 445{ 446 struct s5h1420_state* state = fe->demodulator_priv; 447 448 s5h1420_writereg(state, 0x46, 0x1f); 449 mdelay(25); 450 451 *ucblocks = (s5h1420_readreg(state, 0x48) << 8) | s5h1420_readreg(state, 0x47); 452 453 return 0; 454} 455 456static void s5h1420_reset(struct s5h1420_state* state) 457{ 458 dprintk("%s\n", __func__); 459 s5h1420_writereg (state, 0x01, 0x08); 460 s5h1420_writereg (state, 0x01, 0x00); 461 udelay(10); 462} 463 464static void s5h1420_setsymbolrate(struct s5h1420_state* state, 465 struct dtv_frontend_properties *p) 466{ 467 u8 v; 468 u64 val; 469 470 dprintk("enter %s\n", __func__); 471 472 val = ((u64) p->symbol_rate / 1000ULL) * (1ULL<<24); 473 if (p->symbol_rate < 29000000) 474 val *= 2; 475 do_div(val, (state->fclk / 1000)); 476 477 dprintk("symbol rate register: %06llx\n", (unsigned long long)val); 478 479 v = s5h1420_readreg(state, Loop01); 480 s5h1420_writereg(state, Loop01, v & 0x7f); 481 s5h1420_writereg(state, Tnco01, val >> 16); 482 s5h1420_writereg(state, Tnco02, val >> 8); 483 s5h1420_writereg(state, Tnco03, val & 0xff); 484 s5h1420_writereg(state, Loop01, v | 0x80); 485 dprintk("leave %s\n", __func__); 486} 487 488static u32 s5h1420_getsymbolrate(struct s5h1420_state* state) 489{ 490 return state->symbol_rate; 491} 492 493static void s5h1420_setfreqoffset(struct s5h1420_state* state, int freqoffset) 494{ 495 int val; 496 u8 v; 497 498 dprintk("enter %s\n", __func__); 499 500 /* remember freqoffset is in kHz, but the chip wants the offset in Hz, so 501 * divide fclk by 1000000 to get the correct value. */ 502 val = -(int) ((freqoffset * (1<<24)) / (state->fclk / 1000000)); 503 504 dprintk("phase rotator/freqoffset: %d %06x\n", freqoffset, val); 505 506 v = s5h1420_readreg(state, Loop01); 507 s5h1420_writereg(state, Loop01, v & 0xbf); 508 s5h1420_writereg(state, Pnco01, val >> 16); 509 s5h1420_writereg(state, Pnco02, val >> 8); 510 s5h1420_writereg(state, Pnco03, val & 0xff); 511 s5h1420_writereg(state, Loop01, v | 0x40); 512 dprintk("leave %s\n", __func__); 513} 514 515static int s5h1420_getfreqoffset(struct s5h1420_state* state) 516{ 517 int val; 518 519 s5h1420_writereg(state, 0x06, s5h1420_readreg(state, 0x06) | 0x08); 520 val = s5h1420_readreg(state, 0x0e) << 16; 521 val |= s5h1420_readreg(state, 0x0f) << 8; 522 val |= s5h1420_readreg(state, 0x10); 523 s5h1420_writereg(state, 0x06, s5h1420_readreg(state, 0x06) & 0xf7); 524 525 if (val & 0x800000) 526 val |= 0xff000000; 527 528 /* remember freqoffset is in kHz, but the chip wants the offset in Hz, so 529 * divide fclk by 1000000 to get the correct value. */ 530 val = (((-val) * (state->fclk/1000000)) / (1<<24)); 531 532 return val; 533} 534 535static void s5h1420_setfec_inversion(struct s5h1420_state* state, 536 struct dtv_frontend_properties *p) 537{ 538 u8 inversion = 0; 539 u8 vit08, vit09; 540 541 dprintk("enter %s\n", __func__); 542 543 if (p->inversion == INVERSION_OFF) 544 inversion = state->config->invert ? 0x08 : 0; 545 else if (p->inversion == INVERSION_ON) 546 inversion = state->config->invert ? 0 : 0x08; 547 548 if ((p->fec_inner == FEC_AUTO) || (p->inversion == INVERSION_AUTO)) { 549 vit08 = 0x3f; 550 vit09 = 0; 551 } else { 552 switch (p->fec_inner) { 553 case FEC_1_2: 554 vit08 = 0x01; 555 vit09 = 0x10; 556 break; 557 558 case FEC_2_3: 559 vit08 = 0x02; 560 vit09 = 0x11; 561 break; 562 563 case FEC_3_4: 564 vit08 = 0x04; 565 vit09 = 0x12; 566 break; 567 568 case FEC_5_6: 569 vit08 = 0x08; 570 vit09 = 0x13; 571 break; 572 573 case FEC_6_7: 574 vit08 = 0x10; 575 vit09 = 0x14; 576 break; 577 578 case FEC_7_8: 579 vit08 = 0x20; 580 vit09 = 0x15; 581 break; 582 583 default: 584 return; 585 } 586 } 587 vit09 |= inversion; 588 dprintk("fec: %02x %02x\n", vit08, vit09); 589 s5h1420_writereg(state, Vit08, vit08); 590 s5h1420_writereg(state, Vit09, vit09); 591 dprintk("leave %s\n", __func__); 592} 593 594static enum fe_code_rate s5h1420_getfec(struct s5h1420_state *state) 595{ 596 switch(s5h1420_readreg(state, 0x32) & 0x07) { 597 case 0: 598 return FEC_1_2; 599 600 case 1: 601 return FEC_2_3; 602 603 case 2: 604 return FEC_3_4; 605 606 case 3: 607 return FEC_5_6; 608 609 case 4: 610 return FEC_6_7; 611 612 case 5: 613 return FEC_7_8; 614 } 615 616 return FEC_NONE; 617} 618 619static enum fe_spectral_inversion 620s5h1420_getinversion(struct s5h1420_state *state) 621{ 622 if (s5h1420_readreg(state, 0x32) & 0x08) 623 return INVERSION_ON; 624 625 return INVERSION_OFF; 626} 627 628static int s5h1420_set_frontend(struct dvb_frontend *fe) 629{ 630 struct dtv_frontend_properties *p = &fe->dtv_property_cache; 631 struct s5h1420_state* state = fe->demodulator_priv; 632 int frequency_delta; 633 struct dvb_frontend_tune_settings fesettings; 634 635 dprintk("enter %s\n", __func__); 636 637 /* check if we should do a fast-tune */ 638 s5h1420_get_tune_settings(fe, &fesettings); 639 frequency_delta = p->frequency - state->tunedfreq; 640 if ((frequency_delta > -fesettings.max_drift) && 641 (frequency_delta < fesettings.max_drift) && 642 (frequency_delta != 0) && 643 (state->fec_inner == p->fec_inner) && 644 (state->symbol_rate == p->symbol_rate)) { 645 646 if (fe->ops.tuner_ops.set_params) { 647 fe->ops.tuner_ops.set_params(fe); 648 if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); 649 } 650 if (fe->ops.tuner_ops.get_frequency) { 651 u32 tmp; 652 fe->ops.tuner_ops.get_frequency(fe, &tmp); 653 if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); 654 s5h1420_setfreqoffset(state, p->frequency - tmp); 655 } else { 656 s5h1420_setfreqoffset(state, 0); 657 } 658 dprintk("simple tune\n"); 659 return 0; 660 } 661 dprintk("tuning demod\n"); 662 663 /* first of all, software reset */ 664 s5h1420_reset(state); 665 666 /* set s5h1420 fclk PLL according to desired symbol rate */ 667 if (p->symbol_rate > 33000000) 668 state->fclk = 80000000; 669 else if (p->symbol_rate > 28500000) 670 state->fclk = 59000000; 671 else if (p->symbol_rate > 25000000) 672 state->fclk = 86000000; 673 else if (p->symbol_rate > 1900000) 674 state->fclk = 88000000; 675 else 676 state->fclk = 44000000; 677 678 dprintk("pll01: %d, ToneFreq: %d\n", state->fclk/1000000 - 8, (state->fclk + (TONE_FREQ * 32) - 1) / (TONE_FREQ * 32)); 679 s5h1420_writereg(state, PLL01, state->fclk/1000000 - 8); 680 s5h1420_writereg(state, PLL02, 0x40); 681 s5h1420_writereg(state, DiS01, (state->fclk + (TONE_FREQ * 32) - 1) / (TONE_FREQ * 32)); 682 683 /* TODO DC offset removal, config parameter ? */ 684 if (p->symbol_rate > 29000000) 685 s5h1420_writereg(state, QPSK01, 0xae | 0x10); 686 else 687 s5h1420_writereg(state, QPSK01, 0xac | 0x10); 688 689 /* set misc registers */ 690 s5h1420_writereg(state, CON_1, 0x00); 691 s5h1420_writereg(state, QPSK02, 0x00); 692 s5h1420_writereg(state, Pre01, 0xb0); 693 694 s5h1420_writereg(state, Loop01, 0xF0); 695 s5h1420_writereg(state, Loop02, 0x2a); /* e7 for s5h1420 */ 696 s5h1420_writereg(state, Loop03, 0x79); /* 78 for s5h1420 */ 697 if (p->symbol_rate > 20000000) 698 s5h1420_writereg(state, Loop04, 0x79); 699 else 700 s5h1420_writereg(state, Loop04, 0x58); 701 s5h1420_writereg(state, Loop05, 0x6b); 702 703 if (p->symbol_rate >= 8000000) 704 s5h1420_writereg(state, Post01, (0 << 6) | 0x10); 705 else if (p->symbol_rate >= 4000000) 706 s5h1420_writereg(state, Post01, (1 << 6) | 0x10); 707 else 708 s5h1420_writereg(state, Post01, (3 << 6) | 0x10); 709 710 s5h1420_writereg(state, Monitor12, 0x00); /* unfreeze DC compensation */ 711 712 s5h1420_writereg(state, Sync01, 0x33); 713 s5h1420_writereg(state, Mpeg01, state->config->cdclk_polarity); 714 s5h1420_writereg(state, Mpeg02, 0x3d); /* Parallel output more, disabled -> enabled later */ 715 s5h1420_writereg(state, Err01, 0x03); /* 0x1d for s5h1420 */ 716 717 s5h1420_writereg(state, Vit06, 0x6e); /* 0x8e for s5h1420 */ 718 s5h1420_writereg(state, DiS03, 0x00); 719 s5h1420_writereg(state, Rf01, 0x61); /* Tuner i2c address - for the gate controller */ 720 721 /* set tuner PLL */ 722 if (fe->ops.tuner_ops.set_params) { 723 fe->ops.tuner_ops.set_params(fe); 724 if (fe->ops.i2c_gate_ctrl) 725 fe->ops.i2c_gate_ctrl(fe, 0); 726 s5h1420_setfreqoffset(state, 0); 727 } 728 729 /* set the reset of the parameters */ 730 s5h1420_setsymbolrate(state, p); 731 s5h1420_setfec_inversion(state, p); 732 733 /* start QPSK */ 734 s5h1420_writereg(state, QPSK01, s5h1420_readreg(state, QPSK01) | 1); 735 736 state->fec_inner = p->fec_inner; 737 state->symbol_rate = p->symbol_rate; 738 state->postlocked = 0; 739 state->tunedfreq = p->frequency; 740 741 dprintk("leave %s\n", __func__); 742 return 0; 743} 744 745static int s5h1420_get_frontend(struct dvb_frontend* fe, 746 struct dtv_frontend_properties *p) 747{ 748 struct s5h1420_state* state = fe->demodulator_priv; 749 750 p->frequency = state->tunedfreq + s5h1420_getfreqoffset(state); 751 p->inversion = s5h1420_getinversion(state); 752 p->symbol_rate = s5h1420_getsymbolrate(state); 753 p->fec_inner = s5h1420_getfec(state); 754 755 return 0; 756} 757 758static int s5h1420_get_tune_settings(struct dvb_frontend* fe, 759 struct dvb_frontend_tune_settings* fesettings) 760{ 761 struct dtv_frontend_properties *p = &fe->dtv_property_cache; 762 if (p->symbol_rate > 20000000) { 763 fesettings->min_delay_ms = 50; 764 fesettings->step_size = 2000; 765 fesettings->max_drift = 8000; 766 } else if (p->symbol_rate > 12000000) { 767 fesettings->min_delay_ms = 100; 768 fesettings->step_size = 1500; 769 fesettings->max_drift = 9000; 770 } else if (p->symbol_rate > 8000000) { 771 fesettings->min_delay_ms = 100; 772 fesettings->step_size = 1000; 773 fesettings->max_drift = 8000; 774 } else if (p->symbol_rate > 4000000) { 775 fesettings->min_delay_ms = 100; 776 fesettings->step_size = 500; 777 fesettings->max_drift = 7000; 778 } else if (p->symbol_rate > 2000000) { 779 fesettings->min_delay_ms = 200; 780 fesettings->step_size = (p->symbol_rate / 8000); 781 fesettings->max_drift = 14 * fesettings->step_size; 782 } else { 783 fesettings->min_delay_ms = 200; 784 fesettings->step_size = (p->symbol_rate / 8000); 785 fesettings->max_drift = 18 * fesettings->step_size; 786 } 787 788 return 0; 789} 790 791static int s5h1420_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) 792{ 793 struct s5h1420_state* state = fe->demodulator_priv; 794 795 if (enable) 796 return s5h1420_writereg(state, 0x02, state->CON_1_val | 1); 797 else 798 return s5h1420_writereg(state, 0x02, state->CON_1_val & 0xfe); 799} 800 801static int s5h1420_init (struct dvb_frontend* fe) 802{ 803 struct s5h1420_state* state = fe->demodulator_priv; 804 805 /* disable power down and do reset */ 806 state->CON_1_val = state->config->serial_mpeg << 4; 807 s5h1420_writereg(state, 0x02, state->CON_1_val); 808 msleep(10); 809 s5h1420_reset(state); 810 811 return 0; 812} 813 814static int s5h1420_sleep(struct dvb_frontend* fe) 815{ 816 struct s5h1420_state* state = fe->demodulator_priv; 817 state->CON_1_val = 0x12; 818 return s5h1420_writereg(state, 0x02, state->CON_1_val); 819} 820 821static void s5h1420_release(struct dvb_frontend* fe) 822{ 823 struct s5h1420_state* state = fe->demodulator_priv; 824 i2c_del_adapter(&state->tuner_i2c_adapter); 825 kfree(state); 826} 827 828static u32 s5h1420_tuner_i2c_func(struct i2c_adapter *adapter) 829{ 830 return I2C_FUNC_I2C; 831} 832 833static int s5h1420_tuner_i2c_tuner_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msg[], int num) 834{ 835 struct s5h1420_state *state = i2c_get_adapdata(i2c_adap); 836 struct i2c_msg m[3]; 837 u8 tx_open[2] = { CON_1, state->CON_1_val | 1 }; /* repeater stops once there was a stop condition */ 838 839 if (1 + num > ARRAY_SIZE(m)) { 840 printk(KERN_WARNING 841 "%s: i2c xfer: num=%d is too big!\n", 842 KBUILD_MODNAME, num); 843 return -EOPNOTSUPP; 844 } 845 846 memset(m, 0, sizeof(struct i2c_msg) * (1 + num)); 847 848 m[0].addr = state->config->demod_address; 849 m[0].buf = tx_open; 850 m[0].len = 2; 851 852 memcpy(&m[1], msg, sizeof(struct i2c_msg) * num); 853 854 return i2c_transfer(state->i2c, m, 1 + num) == 1 + num ? num : -EIO; 855} 856 857static const struct i2c_algorithm s5h1420_tuner_i2c_algo = { 858 .master_xfer = s5h1420_tuner_i2c_tuner_xfer, 859 .functionality = s5h1420_tuner_i2c_func, 860}; 861 862struct i2c_adapter *s5h1420_get_tuner_i2c_adapter(struct dvb_frontend *fe) 863{ 864 struct s5h1420_state *state = fe->demodulator_priv; 865 return &state->tuner_i2c_adapter; 866} 867EXPORT_SYMBOL(s5h1420_get_tuner_i2c_adapter); 868 869static const struct dvb_frontend_ops s5h1420_ops; 870 871struct dvb_frontend *s5h1420_attach(const struct s5h1420_config *config, 872 struct i2c_adapter *i2c) 873{ 874 /* allocate memory for the internal state */ 875 struct s5h1420_state *state = kzalloc(sizeof(struct s5h1420_state), GFP_KERNEL); 876 u8 i; 877 878 if (state == NULL) 879 goto error; 880 881 /* setup the state */ 882 state->config = config; 883 state->i2c = i2c; 884 state->postlocked = 0; 885 state->fclk = 88000000; 886 state->tunedfreq = 0; 887 state->fec_inner = FEC_NONE; 888 state->symbol_rate = 0; 889 890 /* check if the demod is there + identify it */ 891 i = s5h1420_readreg(state, ID01); 892 if (i != 0x03) 893 goto error; 894 895 memset(state->shadow, 0xff, sizeof(state->shadow)); 896 897 for (i = 0; i < 0x50; i++) 898 state->shadow[i] = s5h1420_readreg(state, i); 899 900 /* create dvb_frontend */ 901 memcpy(&state->frontend.ops, &s5h1420_ops, sizeof(struct dvb_frontend_ops)); 902 state->frontend.demodulator_priv = state; 903 904 /* create tuner i2c adapter */ 905 strscpy(state->tuner_i2c_adapter.name, "S5H1420-PN1010 tuner I2C bus", 906 sizeof(state->tuner_i2c_adapter.name)); 907 state->tuner_i2c_adapter.algo = &s5h1420_tuner_i2c_algo; 908 state->tuner_i2c_adapter.algo_data = NULL; 909 i2c_set_adapdata(&state->tuner_i2c_adapter, state); 910 if (i2c_add_adapter(&state->tuner_i2c_adapter) < 0) { 911 printk(KERN_ERR "S5H1420/PN1010: tuner i2c bus could not be initialized\n"); 912 goto error; 913 } 914 915 return &state->frontend; 916 917error: 918 kfree(state); 919 return NULL; 920} 921EXPORT_SYMBOL_GPL(s5h1420_attach); 922 923static const struct dvb_frontend_ops s5h1420_ops = { 924 .delsys = { SYS_DVBS }, 925 .info = { 926 .name = "Samsung S5H1420/PnpNetwork PN1010 DVB-S", 927 .frequency_min_hz = 950 * MHz, 928 .frequency_max_hz = 2150 * MHz, 929 .frequency_stepsize_hz = 125 * kHz, 930 .frequency_tolerance_hz = 29500 * kHz, 931 .symbol_rate_min = 1000000, 932 .symbol_rate_max = 45000000, 933 /* .symbol_rate_tolerance = ???,*/ 934 .caps = FE_CAN_INVERSION_AUTO | 935 FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | 936 FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | 937 FE_CAN_QPSK 938 }, 939 940 .release = s5h1420_release, 941 942 .init = s5h1420_init, 943 .sleep = s5h1420_sleep, 944 .i2c_gate_ctrl = s5h1420_i2c_gate_ctrl, 945 946 .set_frontend = s5h1420_set_frontend, 947 .get_frontend = s5h1420_get_frontend, 948 .get_tune_settings = s5h1420_get_tune_settings, 949 950 .read_status = s5h1420_read_status, 951 .read_ber = s5h1420_read_ber, 952 .read_signal_strength = s5h1420_read_signal_strength, 953 .read_ucblocks = s5h1420_read_ucblocks, 954 955 .diseqc_send_master_cmd = s5h1420_send_master_cmd, 956 .diseqc_recv_slave_reply = s5h1420_recv_slave_reply, 957 .diseqc_send_burst = s5h1420_send_burst, 958 .set_tone = s5h1420_set_tone, 959 .set_voltage = s5h1420_set_voltage, 960}; 961 962MODULE_DESCRIPTION("Samsung S5H1420/PnpNetwork PN1010 DVB-S Demodulator driver"); 963MODULE_AUTHOR("Andrew de Quincey, Patrick Boettcher"); 964MODULE_LICENSE("GPL"); 965