1// SPDX-License-Identifier: GPL-2.0 2#include <media/drv-intf/saa7146_vv.h> 3 4static int vbi_pixel_to_capture = 720 * 2; 5 6static int vbi_workaround(struct saa7146_dev *dev) 7{ 8 struct saa7146_vv *vv = dev->vv_data; 9 10 u32 *cpu; 11 dma_addr_t dma_addr; 12 13 int count = 0; 14 int i; 15 16 DECLARE_WAITQUEUE(wait, current); 17 18 DEB_VBI("dev:%p\n", dev); 19 20 /* once again, a bug in the saa7146: the brs acquisition 21 is buggy and especially the BXO-counter does not work 22 as specified. there is this workaround, but please 23 don't let me explain it. ;-) */ 24 25 cpu = pci_alloc_consistent(dev->pci, 4096, &dma_addr); 26 if (NULL == cpu) 27 return -ENOMEM; 28 29 /* setup some basic programming, just for the workaround */ 30 saa7146_write(dev, BASE_EVEN3, dma_addr); 31 saa7146_write(dev, BASE_ODD3, dma_addr+vbi_pixel_to_capture); 32 saa7146_write(dev, PROT_ADDR3, dma_addr+4096); 33 saa7146_write(dev, PITCH3, vbi_pixel_to_capture); 34 saa7146_write(dev, BASE_PAGE3, 0x0); 35 saa7146_write(dev, NUM_LINE_BYTE3, (2<<16)|((vbi_pixel_to_capture)<<0)); 36 saa7146_write(dev, MC2, MASK_04|MASK_20); 37 38 /* load brs-control register */ 39 WRITE_RPS1(CMD_WR_REG | (1 << 8) | (BRS_CTRL/4)); 40 /* BXO = 1h, BRS to outbound */ 41 WRITE_RPS1(0xc000008c); 42 /* wait for vbi_a or vbi_b*/ 43 if ( 0 != (SAA7146_USE_PORT_B_FOR_VBI & dev->ext_vv_data->flags)) { 44 DEB_D("...using port b\n"); 45 WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | CMD_E_FID_B); 46 WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | CMD_O_FID_B); 47/* 48 WRITE_RPS1(CMD_PAUSE | MASK_09); 49*/ 50 } else { 51 DEB_D("...using port a\n"); 52 WRITE_RPS1(CMD_PAUSE | MASK_10); 53 } 54 /* upload brs */ 55 WRITE_RPS1(CMD_UPLOAD | MASK_08); 56 /* load brs-control register */ 57 WRITE_RPS1(CMD_WR_REG | (1 << 8) | (BRS_CTRL/4)); 58 /* BYO = 1, BXO = NQBIL (=1728 for PAL, for NTSC this is 858*2) - NumByte3 (=1440) = 288 */ 59 WRITE_RPS1(((1728-(vbi_pixel_to_capture)) << 7) | MASK_19); 60 /* wait for brs_done */ 61 WRITE_RPS1(CMD_PAUSE | MASK_08); 62 /* upload brs */ 63 WRITE_RPS1(CMD_UPLOAD | MASK_08); 64 /* load video-dma3 NumLines3 and NumBytes3 */ 65 WRITE_RPS1(CMD_WR_REG | (1 << 8) | (NUM_LINE_BYTE3/4)); 66 /* dev->vbi_count*2 lines, 720 pixel (= 1440 Bytes) */ 67 WRITE_RPS1((2 << 16) | (vbi_pixel_to_capture)); 68 /* load brs-control register */ 69 WRITE_RPS1(CMD_WR_REG | (1 << 8) | (BRS_CTRL/4)); 70 /* Set BRS right: note: this is an experimental value for BXO (=> PAL!) */ 71 WRITE_RPS1((540 << 7) | (5 << 19)); // 5 == vbi_start 72 /* wait for brs_done */ 73 WRITE_RPS1(CMD_PAUSE | MASK_08); 74 /* upload brs and video-dma3*/ 75 WRITE_RPS1(CMD_UPLOAD | MASK_08 | MASK_04); 76 /* load mc2 register: enable dma3 */ 77 WRITE_RPS1(CMD_WR_REG | (1 << 8) | (MC1/4)); 78 WRITE_RPS1(MASK_20 | MASK_04); 79 /* generate interrupt */ 80 WRITE_RPS1(CMD_INTERRUPT); 81 /* stop rps1 */ 82 WRITE_RPS1(CMD_STOP); 83 84 /* we have to do the workaround twice to be sure that 85 everything is ok */ 86 for(i = 0; i < 2; i++) { 87 88 /* indicate to the irq handler that we do the workaround */ 89 saa7146_write(dev, MC2, MASK_31|MASK_15); 90 91 saa7146_write(dev, NUM_LINE_BYTE3, (1<<16)|(2<<0)); 92 saa7146_write(dev, MC2, MASK_04|MASK_20); 93 94 /* enable rps1 irqs */ 95 SAA7146_IER_ENABLE(dev,MASK_28); 96 97 /* prepare to wait to be woken up by the irq-handler */ 98 add_wait_queue(&vv->vbi_wq, &wait); 99 set_current_state(TASK_INTERRUPTIBLE); 100 101 /* start rps1 to enable workaround */ 102 saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle); 103 saa7146_write(dev, MC1, (MASK_13 | MASK_29)); 104 105 schedule(); 106 107 DEB_VBI("brs bug workaround %d/1\n", i); 108 109 remove_wait_queue(&vv->vbi_wq, &wait); 110 __set_current_state(TASK_RUNNING); 111 112 /* disable rps1 irqs */ 113 SAA7146_IER_DISABLE(dev,MASK_28); 114 115 /* stop video-dma3 */ 116 saa7146_write(dev, MC1, MASK_20); 117 118 if(signal_pending(current)) { 119 120 DEB_VBI("aborted (rps:0x%08x)\n", 121 saa7146_read(dev, RPS_ADDR1)); 122 123 /* stop rps1 for sure */ 124 saa7146_write(dev, MC1, MASK_29); 125 126 pci_free_consistent(dev->pci, 4096, cpu, dma_addr); 127 return -EINTR; 128 } 129 } 130 131 pci_free_consistent(dev->pci, 4096, cpu, dma_addr); 132 return 0; 133} 134 135static void saa7146_set_vbi_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next) 136{ 137 struct saa7146_vv *vv = dev->vv_data; 138 139 struct saa7146_video_dma vdma3; 140 141 int count = 0; 142 unsigned long e_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_E_FID_A : CMD_E_FID_B; 143 unsigned long o_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_O_FID_A : CMD_O_FID_B; 144 145/* 146 vdma3.base_even = 0xc8000000+2560*70; 147 vdma3.base_odd = 0xc8000000; 148 vdma3.prot_addr = 0xc8000000+2560*164; 149 vdma3.pitch = 2560; 150 vdma3.base_page = 0; 151 vdma3.num_line_byte = (64<<16)|((vbi_pixel_to_capture)<<0); // set above! 152*/ 153 vdma3.base_even = buf->pt[2].offset; 154 vdma3.base_odd = buf->pt[2].offset + 16 * vbi_pixel_to_capture; 155 vdma3.prot_addr = buf->pt[2].offset + 16 * 2 * vbi_pixel_to_capture; 156 vdma3.pitch = vbi_pixel_to_capture; 157 vdma3.base_page = buf->pt[2].dma | ME1; 158 vdma3.num_line_byte = (16 << 16) | vbi_pixel_to_capture; 159 160 saa7146_write_out_dma(dev, 3, &vdma3); 161 162 /* write beginning of rps-program */ 163 count = 0; 164 165 /* wait for o_fid_a/b / e_fid_a/b toggle only if bit 1 is not set */ 166 167 /* we don't wait here for the first field anymore. this is different from the video 168 capture and might cause that the first buffer is only half filled (with only 169 one field). but since this is some sort of streaming data, this is not that negative. 170 but by doing this, we can use the whole engine from videobuf-dma-sg.c... */ 171 172/* 173 WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | e_wait); 174 WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | o_wait); 175*/ 176 /* set bit 1 */ 177 WRITE_RPS1(CMD_WR_REG | (1 << 8) | (MC2/4)); 178 WRITE_RPS1(MASK_28 | MASK_12); 179 180 /* turn on video-dma3 */ 181 WRITE_RPS1(CMD_WR_REG_MASK | (MC1/4)); 182 WRITE_RPS1(MASK_04 | MASK_20); /* => mask */ 183 WRITE_RPS1(MASK_04 | MASK_20); /* => values */ 184 185 /* wait for o_fid_a/b / e_fid_a/b toggle */ 186 WRITE_RPS1(CMD_PAUSE | o_wait); 187 WRITE_RPS1(CMD_PAUSE | e_wait); 188 189 /* generate interrupt */ 190 WRITE_RPS1(CMD_INTERRUPT); 191 192 /* stop */ 193 WRITE_RPS1(CMD_STOP); 194 195 /* enable rps1 irqs */ 196 SAA7146_IER_ENABLE(dev, MASK_28); 197 198 /* write the address of the rps-program */ 199 saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle); 200 201 /* turn on rps */ 202 saa7146_write(dev, MC1, (MASK_13 | MASK_29)); 203} 204 205static int buffer_activate(struct saa7146_dev *dev, 206 struct saa7146_buf *buf, 207 struct saa7146_buf *next) 208{ 209 struct saa7146_vv *vv = dev->vv_data; 210 buf->vb.state = VIDEOBUF_ACTIVE; 211 212 DEB_VBI("dev:%p, buf:%p, next:%p\n", dev, buf, next); 213 saa7146_set_vbi_capture(dev,buf,next); 214 215 mod_timer(&vv->vbi_dmaq.timeout, jiffies+BUFFER_TIMEOUT); 216 return 0; 217} 218 219static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,enum v4l2_field field) 220{ 221 struct file *file = q->priv_data; 222 struct saa7146_fh *fh = file->private_data; 223 struct saa7146_dev *dev = fh->dev; 224 struct saa7146_buf *buf = (struct saa7146_buf *)vb; 225 226 int err = 0; 227 int lines, llength, size; 228 229 lines = 16 * 2 ; /* 2 fields */ 230 llength = vbi_pixel_to_capture; 231 size = lines * llength; 232 233 DEB_VBI("vb:%p\n", vb); 234 235 if (0 != buf->vb.baddr && buf->vb.bsize < size) { 236 DEB_VBI("size mismatch\n"); 237 return -EINVAL; 238 } 239 240 if (buf->vb.size != size) 241 saa7146_dma_free(dev,q,buf); 242 243 if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { 244 struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb); 245 246 buf->vb.width = llength; 247 buf->vb.height = lines; 248 buf->vb.size = size; 249 buf->vb.field = field; // FIXME: check this 250 251 saa7146_pgtable_free(dev->pci, &buf->pt[2]); 252 saa7146_pgtable_alloc(dev->pci, &buf->pt[2]); 253 254 err = videobuf_iolock(q,&buf->vb, NULL); 255 if (err) 256 goto oops; 257 err = saa7146_pgtable_build_single(dev->pci, &buf->pt[2], 258 dma->sglist, dma->sglen); 259 if (0 != err) 260 return err; 261 } 262 buf->vb.state = VIDEOBUF_PREPARED; 263 buf->activate = buffer_activate; 264 265 return 0; 266 267 oops: 268 DEB_VBI("error out\n"); 269 saa7146_dma_free(dev,q,buf); 270 271 return err; 272} 273 274static int buffer_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size) 275{ 276 int llength,lines; 277 278 lines = 16 * 2 ; /* 2 fields */ 279 llength = vbi_pixel_to_capture; 280 281 *size = lines * llength; 282 *count = 2; 283 284 DEB_VBI("count:%d, size:%d\n", *count, *size); 285 286 return 0; 287} 288 289static void buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb) 290{ 291 struct file *file = q->priv_data; 292 struct saa7146_fh *fh = file->private_data; 293 struct saa7146_dev *dev = fh->dev; 294 struct saa7146_vv *vv = dev->vv_data; 295 struct saa7146_buf *buf = (struct saa7146_buf *)vb; 296 297 DEB_VBI("vb:%p\n", vb); 298 saa7146_buffer_queue(dev, &vv->vbi_dmaq, buf); 299} 300 301static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb) 302{ 303 struct file *file = q->priv_data; 304 struct saa7146_fh *fh = file->private_data; 305 struct saa7146_dev *dev = fh->dev; 306 struct saa7146_buf *buf = (struct saa7146_buf *)vb; 307 308 DEB_VBI("vb:%p\n", vb); 309 saa7146_dma_free(dev,q,buf); 310} 311 312static const struct videobuf_queue_ops vbi_qops = { 313 .buf_setup = buffer_setup, 314 .buf_prepare = buffer_prepare, 315 .buf_queue = buffer_queue, 316 .buf_release = buffer_release, 317}; 318 319/* ------------------------------------------------------------------ */ 320 321static void vbi_stop(struct saa7146_fh *fh, struct file *file) 322{ 323 struct saa7146_dev *dev = fh->dev; 324 struct saa7146_vv *vv = dev->vv_data; 325 unsigned long flags; 326 DEB_VBI("dev:%p, fh:%p\n", dev, fh); 327 328 spin_lock_irqsave(&dev->slock,flags); 329 330 /* disable rps1 */ 331 saa7146_write(dev, MC1, MASK_29); 332 333 /* disable rps1 irqs */ 334 SAA7146_IER_DISABLE(dev, MASK_28); 335 336 /* shut down dma 3 transfers */ 337 saa7146_write(dev, MC1, MASK_20); 338 339 if (vv->vbi_dmaq.curr) 340 saa7146_buffer_finish(dev, &vv->vbi_dmaq, VIDEOBUF_DONE); 341 342 videobuf_queue_cancel(&fh->vbi_q); 343 344 vv->vbi_streaming = NULL; 345 346 del_timer(&vv->vbi_dmaq.timeout); 347 del_timer(&vv->vbi_read_timeout); 348 349 spin_unlock_irqrestore(&dev->slock, flags); 350} 351 352static void vbi_read_timeout(struct timer_list *t) 353{ 354 struct saa7146_vv *vv = from_timer(vv, t, vbi_read_timeout); 355 struct file *file = vv->vbi_read_timeout_file; 356 struct saa7146_fh *fh = file->private_data; 357 struct saa7146_dev *dev = fh->dev; 358 359 DEB_VBI("dev:%p, fh:%p\n", dev, fh); 360 361 vbi_stop(fh, file); 362} 363 364static void vbi_init(struct saa7146_dev *dev, struct saa7146_vv *vv) 365{ 366 DEB_VBI("dev:%p\n", dev); 367 368 INIT_LIST_HEAD(&vv->vbi_dmaq.queue); 369 370 timer_setup(&vv->vbi_dmaq.timeout, saa7146_buffer_timeout, 0); 371 vv->vbi_dmaq.dev = dev; 372 373 init_waitqueue_head(&vv->vbi_wq); 374} 375 376static int vbi_open(struct saa7146_dev *dev, struct file *file) 377{ 378 struct saa7146_fh *fh = file->private_data; 379 struct saa7146_vv *vv = fh->dev->vv_data; 380 381 u32 arbtr_ctrl = saa7146_read(dev, PCI_BT_V1); 382 int ret = 0; 383 384 DEB_VBI("dev:%p, fh:%p\n", dev, fh); 385 386 ret = saa7146_res_get(fh, RESOURCE_DMA3_BRS); 387 if (0 == ret) { 388 DEB_S("cannot get vbi RESOURCE_DMA3_BRS resource\n"); 389 return -EBUSY; 390 } 391 392 /* adjust arbitrition control for video dma 3 */ 393 arbtr_ctrl &= ~0x1f0000; 394 arbtr_ctrl |= 0x1d0000; 395 saa7146_write(dev, PCI_BT_V1, arbtr_ctrl); 396 saa7146_write(dev, MC2, (MASK_04|MASK_20)); 397 398 videobuf_queue_sg_init(&fh->vbi_q, &vbi_qops, 399 &dev->pci->dev, &dev->slock, 400 V4L2_BUF_TYPE_VBI_CAPTURE, 401 V4L2_FIELD_SEQ_TB, // FIXME: does this really work? 402 sizeof(struct saa7146_buf), 403 file, &dev->v4l2_lock); 404 405 vv->vbi_read_timeout.function = vbi_read_timeout; 406 vv->vbi_read_timeout_file = file; 407 408 /* initialize the brs */ 409 if ( 0 != (SAA7146_USE_PORT_B_FOR_VBI & dev->ext_vv_data->flags)) { 410 saa7146_write(dev, BRS_CTRL, MASK_30|MASK_29 | (7 << 19)); 411 } else { 412 saa7146_write(dev, BRS_CTRL, 0x00000001); 413 414 if (0 != (ret = vbi_workaround(dev))) { 415 DEB_VBI("vbi workaround failed!\n"); 416 /* return ret;*/ 417 } 418 } 419 420 /* upload brs register */ 421 saa7146_write(dev, MC2, (MASK_08|MASK_24)); 422 return 0; 423} 424 425static void vbi_close(struct saa7146_dev *dev, struct file *file) 426{ 427 struct saa7146_fh *fh = file->private_data; 428 struct saa7146_vv *vv = dev->vv_data; 429 DEB_VBI("dev:%p, fh:%p\n", dev, fh); 430 431 if( fh == vv->vbi_streaming ) { 432 vbi_stop(fh, file); 433 } 434 saa7146_res_free(fh, RESOURCE_DMA3_BRS); 435} 436 437static void vbi_irq_done(struct saa7146_dev *dev, unsigned long status) 438{ 439 struct saa7146_vv *vv = dev->vv_data; 440 spin_lock(&dev->slock); 441 442 if (vv->vbi_dmaq.curr) { 443 DEB_VBI("dev:%p, curr:%p\n", dev, vv->vbi_dmaq.curr); 444 /* this must be += 2, one count for each field */ 445 vv->vbi_fieldcount+=2; 446 vv->vbi_dmaq.curr->vb.field_count = vv->vbi_fieldcount; 447 saa7146_buffer_finish(dev, &vv->vbi_dmaq, VIDEOBUF_DONE); 448 } else { 449 DEB_VBI("dev:%p\n", dev); 450 } 451 saa7146_buffer_next(dev, &vv->vbi_dmaq, 1); 452 453 spin_unlock(&dev->slock); 454} 455 456static ssize_t vbi_read(struct file *file, char __user *data, size_t count, loff_t *ppos) 457{ 458 struct saa7146_fh *fh = file->private_data; 459 struct saa7146_dev *dev = fh->dev; 460 struct saa7146_vv *vv = dev->vv_data; 461 ssize_t ret = 0; 462 463 DEB_VBI("dev:%p, fh:%p\n", dev, fh); 464 465 if( NULL == vv->vbi_streaming ) { 466 // fixme: check if dma3 is available 467 // fixme: activate vbi engine here if necessary. (really?) 468 vv->vbi_streaming = fh; 469 } 470 471 if( fh != vv->vbi_streaming ) { 472 DEB_VBI("open %p is already using vbi capture\n", 473 vv->vbi_streaming); 474 return -EBUSY; 475 } 476 477 mod_timer(&vv->vbi_read_timeout, jiffies+BUFFER_TIMEOUT); 478 ret = videobuf_read_stream(&fh->vbi_q, data, count, ppos, 1, 479 file->f_flags & O_NONBLOCK); 480/* 481 printk("BASE_ODD3: 0x%08x\n", saa7146_read(dev, BASE_ODD3)); 482 printk("BASE_EVEN3: 0x%08x\n", saa7146_read(dev, BASE_EVEN3)); 483 printk("PROT_ADDR3: 0x%08x\n", saa7146_read(dev, PROT_ADDR3)); 484 printk("PITCH3: 0x%08x\n", saa7146_read(dev, PITCH3)); 485 printk("BASE_PAGE3: 0x%08x\n", saa7146_read(dev, BASE_PAGE3)); 486 printk("NUM_LINE_BYTE3: 0x%08x\n", saa7146_read(dev, NUM_LINE_BYTE3)); 487 printk("BRS_CTRL: 0x%08x\n", saa7146_read(dev, BRS_CTRL)); 488*/ 489 return ret; 490} 491 492const struct saa7146_use_ops saa7146_vbi_uops = { 493 .init = vbi_init, 494 .open = vbi_open, 495 .release = vbi_close, 496 .irq_done = vbi_irq_done, 497 .read = vbi_read, 498}; 499