xref: /kernel/linux/linux-5.10/drivers/iio/humidity/si7005.c

// SPDX-License-Identifier: GPL-2.0-only
/*
 * si7005.c - Support for Silabs Si7005 humidity and temperature sensor
 *
 * Copyright (c) 2014 Peter Meerwald <pmeerw@pmeerw.net>
 *
 * (7-bit I2C slave address 0x40)
 *
 * TODO: heater, fast mode, processed mode (temp. / linearity compensation)
 */

#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/pm.h>

#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>

#define SI7005_STATUS 0x00
#define SI7005_DATA 0x01 /* 16-bit, MSB */
#define SI7005_CONFIG 0x03
#define SI7005_ID 0x11

#define SI7005_STATUS_NRDY BIT(0)
#define SI7005_CONFIG_TEMP BIT(4)
#define SI7005_CONFIG_START BIT(0)

#define SI7005_ID_7005 0x50
#define SI7005_ID_7015 0xf0

struct si7005_data {
	struct i2c_client *client;
	struct mutex lock;
	u8 config;
};

static int si7005_read_measurement(struct si7005_data *data, bool temp)
{
	int tries = 50;
	int ret;

	mutex_lock(&data->lock);

	ret = i2c_smbus_write_byte_data(data->client, SI7005_CONFIG,
		data->config | SI7005_CONFIG_START |
		(temp ? SI7005_CONFIG_TEMP : 0));
	if (ret < 0)
		goto done;

	while (tries-- > 0) {
		msleep(20);
		ret = i2c_smbus_read_byte_data(data->client, SI7005_STATUS);
		if (ret < 0)
			goto done;
		if (!(ret & SI7005_STATUS_NRDY))
			break;
	}
	if (tries < 0) {
		ret = -EIO;
		goto done;
	}

	ret = i2c_smbus_read_word_swapped(data->client, SI7005_DATA);

done:
	mutex_unlock(&data->lock);

	return ret;
}

static int si7005_read_raw(struct iio_dev *indio_dev,
			    struct iio_chan_spec const *chan, int *val,
			    int *val2, long mask)
{
	struct si7005_data *data = iio_priv(indio_dev);
	int ret;

	switch (mask) {
	case IIO_CHAN_INFO_RAW:
		ret = si7005_read_measurement(data, chan->type == IIO_TEMP);
		if (ret < 0)
			return ret;
		*val = ret;
		return IIO_VAL_INT;
	case IIO_CHAN_INFO_SCALE:
		if (chan->type == IIO_TEMP) {
			*val = 7;
			*val2 = 812500;
		} else {
			*val = 3;
			*val2 = 906250;
		}
		return IIO_VAL_INT_PLUS_MICRO;
	case IIO_CHAN_INFO_OFFSET:
		if (chan->type == IIO_TEMP)
			*val = -50 * 32 * 4;
		else
			*val = -24 * 16 * 16;
		return IIO_VAL_INT;
	default:
		break;
	}

	return -EINVAL;
}

static const struct iio_chan_spec si7005_channels[] = {
	{
		.type = IIO_HUMIDITYRELATIVE,
		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
			BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_OFFSET),
	},
	{
		.type = IIO_TEMP,
		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
			BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_OFFSET),
	}
};

static const struct iio_info si7005_info = {
	.read_raw = si7005_read_raw,
};

static int si7005_probe(struct i2c_client *client,
			 const struct i2c_device_id *id)
{
	struct iio_dev *indio_dev;
	struct si7005_data *data;
	int ret;

	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
		return -EOPNOTSUPP;

	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
	if (!indio_dev)
		return -ENOMEM;

	data = iio_priv(indio_dev);
	i2c_set_clientdata(client, indio_dev);
	data->client = client;
	mutex_init(&data->lock);

	indio_dev->name = dev_name(&client->dev);
	indio_dev->modes = INDIO_DIRECT_MODE;
	indio_dev->info = &si7005_info;

	indio_dev->channels = si7005_channels;
	indio_dev->num_channels = ARRAY_SIZE(si7005_channels);

	ret = i2c_smbus_read_byte_data(client, SI7005_ID);
	if (ret < 0)
		return ret;
	if (ret != SI7005_ID_7005 && ret != SI7005_ID_7015)
		return -ENODEV;

	ret = i2c_smbus_read_byte_data(client, SI7005_CONFIG);
	if (ret < 0)
		return ret;
	data->config = ret;

	return devm_iio_device_register(&client->dev, indio_dev);
}

static const struct i2c_device_id si7005_id[] = {
	{ "si7005", 0 },
	{ "th02", 0 },
	{ }
};
MODULE_DEVICE_TABLE(i2c, si7005_id);

static struct i2c_driver si7005_driver = {
	.driver = {
		.name	= "si7005",
	},
	.probe = si7005_probe,
	.id_table = si7005_id,
};
module_i2c_driver(si7005_driver);

MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
MODULE_DESCRIPTION("Silabs Si7005 humidity and temperature sensor driver");
MODULE_LICENSE("GPL");