1/* 2 * Copyright © 2006-2017 Intel Corporation 3 * 4 * Permission is hereby granted, free of charge, to any person obtaining a 5 * copy of this software and associated documentation files (the "Software"), 6 * to deal in the Software without restriction, including without limitation 7 * the rights to use, copy, modify, merge, publish, distribute, sublicense, 8 * and/or sell copies of the Software, and to permit persons to whom the 9 * Software is furnished to do so, subject to the following conditions: 10 * 11 * The above copyright notice and this permission notice (including the next 12 * paragraph) shall be included in all copies or substantial portions of the 13 * Software. 14 * 15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER 21 * DEALINGS IN THE SOFTWARE. 22 */ 23 24#include <linux/time.h> 25 26#include "intel_atomic.h" 27#include "intel_bw.h" 28#include "intel_cdclk.h" 29#include "intel_display_types.h" 30#include "intel_sideband.h" 31 32/** 33 * DOC: CDCLK / RAWCLK 34 * 35 * The display engine uses several different clocks to do its work. There 36 * are two main clocks involved that aren't directly related to the actual 37 * pixel clock or any symbol/bit clock of the actual output port. These 38 * are the core display clock (CDCLK) and RAWCLK. 39 * 40 * CDCLK clocks most of the display pipe logic, and thus its frequency 41 * must be high enough to support the rate at which pixels are flowing 42 * through the pipes. Downscaling must also be accounted as that increases 43 * the effective pixel rate. 44 * 45 * On several platforms the CDCLK frequency can be changed dynamically 46 * to minimize power consumption for a given display configuration. 47 * Typically changes to the CDCLK frequency require all the display pipes 48 * to be shut down while the frequency is being changed. 49 * 50 * On SKL+ the DMC will toggle the CDCLK off/on during DC5/6 entry/exit. 51 * DMC will not change the active CDCLK frequency however, so that part 52 * will still be performed by the driver directly. 53 * 54 * RAWCLK is a fixed frequency clock, often used by various auxiliary 55 * blocks such as AUX CH or backlight PWM. Hence the only thing we 56 * really need to know about RAWCLK is its frequency so that various 57 * dividers can be programmed correctly. 58 */ 59 60static void fixed_133mhz_get_cdclk(struct drm_i915_private *dev_priv, 61 struct intel_cdclk_config *cdclk_config) 62{ 63 cdclk_config->cdclk = 133333; 64} 65 66static void fixed_200mhz_get_cdclk(struct drm_i915_private *dev_priv, 67 struct intel_cdclk_config *cdclk_config) 68{ 69 cdclk_config->cdclk = 200000; 70} 71 72static void fixed_266mhz_get_cdclk(struct drm_i915_private *dev_priv, 73 struct intel_cdclk_config *cdclk_config) 74{ 75 cdclk_config->cdclk = 266667; 76} 77 78static void fixed_333mhz_get_cdclk(struct drm_i915_private *dev_priv, 79 struct intel_cdclk_config *cdclk_config) 80{ 81 cdclk_config->cdclk = 333333; 82} 83 84static void fixed_400mhz_get_cdclk(struct drm_i915_private *dev_priv, 85 struct intel_cdclk_config *cdclk_config) 86{ 87 cdclk_config->cdclk = 400000; 88} 89 90static void fixed_450mhz_get_cdclk(struct drm_i915_private *dev_priv, 91 struct intel_cdclk_config *cdclk_config) 92{ 93 cdclk_config->cdclk = 450000; 94} 95 96static void i85x_get_cdclk(struct drm_i915_private *dev_priv, 97 struct intel_cdclk_config *cdclk_config) 98{ 99 struct pci_dev *pdev = dev_priv->drm.pdev; 100 u16 hpllcc = 0; 101 102 /* 103 * 852GM/852GMV only supports 133 MHz and the HPLLCC 104 * encoding is different :( 105 * FIXME is this the right way to detect 852GM/852GMV? 106 */ 107 if (pdev->revision == 0x1) { 108 cdclk_config->cdclk = 133333; 109 return; 110 } 111 112 pci_bus_read_config_word(pdev->bus, 113 PCI_DEVFN(0, 3), HPLLCC, &hpllcc); 114 115 /* Assume that the hardware is in the high speed state. This 116 * should be the default. 117 */ 118 switch (hpllcc & GC_CLOCK_CONTROL_MASK) { 119 case GC_CLOCK_133_200: 120 case GC_CLOCK_133_200_2: 121 case GC_CLOCK_100_200: 122 cdclk_config->cdclk = 200000; 123 break; 124 case GC_CLOCK_166_250: 125 cdclk_config->cdclk = 250000; 126 break; 127 case GC_CLOCK_100_133: 128 cdclk_config->cdclk = 133333; 129 break; 130 case GC_CLOCK_133_266: 131 case GC_CLOCK_133_266_2: 132 case GC_CLOCK_166_266: 133 cdclk_config->cdclk = 266667; 134 break; 135 } 136} 137 138static void i915gm_get_cdclk(struct drm_i915_private *dev_priv, 139 struct intel_cdclk_config *cdclk_config) 140{ 141 struct pci_dev *pdev = dev_priv->drm.pdev; 142 u16 gcfgc = 0; 143 144 pci_read_config_word(pdev, GCFGC, &gcfgc); 145 146 if (gcfgc & GC_LOW_FREQUENCY_ENABLE) { 147 cdclk_config->cdclk = 133333; 148 return; 149 } 150 151 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) { 152 case GC_DISPLAY_CLOCK_333_320_MHZ: 153 cdclk_config->cdclk = 333333; 154 break; 155 default: 156 case GC_DISPLAY_CLOCK_190_200_MHZ: 157 cdclk_config->cdclk = 190000; 158 break; 159 } 160} 161 162static void i945gm_get_cdclk(struct drm_i915_private *dev_priv, 163 struct intel_cdclk_config *cdclk_config) 164{ 165 struct pci_dev *pdev = dev_priv->drm.pdev; 166 u16 gcfgc = 0; 167 168 pci_read_config_word(pdev, GCFGC, &gcfgc); 169 170 if (gcfgc & GC_LOW_FREQUENCY_ENABLE) { 171 cdclk_config->cdclk = 133333; 172 return; 173 } 174 175 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) { 176 case GC_DISPLAY_CLOCK_333_320_MHZ: 177 cdclk_config->cdclk = 320000; 178 break; 179 default: 180 case GC_DISPLAY_CLOCK_190_200_MHZ: 181 cdclk_config->cdclk = 200000; 182 break; 183 } 184} 185 186static unsigned int intel_hpll_vco(struct drm_i915_private *dev_priv) 187{ 188 static const unsigned int blb_vco[8] = { 189 [0] = 3200000, 190 [1] = 4000000, 191 [2] = 5333333, 192 [3] = 4800000, 193 [4] = 6400000, 194 }; 195 static const unsigned int pnv_vco[8] = { 196 [0] = 3200000, 197 [1] = 4000000, 198 [2] = 5333333, 199 [3] = 4800000, 200 [4] = 2666667, 201 }; 202 static const unsigned int cl_vco[8] = { 203 [0] = 3200000, 204 [1] = 4000000, 205 [2] = 5333333, 206 [3] = 6400000, 207 [4] = 3333333, 208 [5] = 3566667, 209 [6] = 4266667, 210 }; 211 static const unsigned int elk_vco[8] = { 212 [0] = 3200000, 213 [1] = 4000000, 214 [2] = 5333333, 215 [3] = 4800000, 216 }; 217 static const unsigned int ctg_vco[8] = { 218 [0] = 3200000, 219 [1] = 4000000, 220 [2] = 5333333, 221 [3] = 6400000, 222 [4] = 2666667, 223 [5] = 4266667, 224 }; 225 const unsigned int *vco_table; 226 unsigned int vco; 227 u8 tmp = 0; 228 229 /* FIXME other chipsets? */ 230 if (IS_GM45(dev_priv)) 231 vco_table = ctg_vco; 232 else if (IS_G45(dev_priv)) 233 vco_table = elk_vco; 234 else if (IS_I965GM(dev_priv)) 235 vco_table = cl_vco; 236 else if (IS_PINEVIEW(dev_priv)) 237 vco_table = pnv_vco; 238 else if (IS_G33(dev_priv)) 239 vco_table = blb_vco; 240 else 241 return 0; 242 243 tmp = intel_de_read(dev_priv, 244 IS_PINEVIEW(dev_priv) || IS_MOBILE(dev_priv) ? HPLLVCO_MOBILE : HPLLVCO); 245 246 vco = vco_table[tmp & 0x7]; 247 if (vco == 0) 248 drm_err(&dev_priv->drm, "Bad HPLL VCO (HPLLVCO=0x%02x)\n", 249 tmp); 250 else 251 drm_dbg_kms(&dev_priv->drm, "HPLL VCO %u kHz\n", vco); 252 253 return vco; 254} 255 256static void g33_get_cdclk(struct drm_i915_private *dev_priv, 257 struct intel_cdclk_config *cdclk_config) 258{ 259 struct pci_dev *pdev = dev_priv->drm.pdev; 260 static const u8 div_3200[] = { 12, 10, 8, 7, 5, 16 }; 261 static const u8 div_4000[] = { 14, 12, 10, 8, 6, 20 }; 262 static const u8 div_4800[] = { 20, 14, 12, 10, 8, 24 }; 263 static const u8 div_5333[] = { 20, 16, 12, 12, 8, 28 }; 264 const u8 *div_table; 265 unsigned int cdclk_sel; 266 u16 tmp = 0; 267 268 cdclk_config->vco = intel_hpll_vco(dev_priv); 269 270 pci_read_config_word(pdev, GCFGC, &tmp); 271 272 cdclk_sel = (tmp >> 4) & 0x7; 273 274 if (cdclk_sel >= ARRAY_SIZE(div_3200)) 275 goto fail; 276 277 switch (cdclk_config->vco) { 278 case 3200000: 279 div_table = div_3200; 280 break; 281 case 4000000: 282 div_table = div_4000; 283 break; 284 case 4800000: 285 div_table = div_4800; 286 break; 287 case 5333333: 288 div_table = div_5333; 289 break; 290 default: 291 goto fail; 292 } 293 294 cdclk_config->cdclk = DIV_ROUND_CLOSEST(cdclk_config->vco, 295 div_table[cdclk_sel]); 296 return; 297 298fail: 299 drm_err(&dev_priv->drm, 300 "Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%08x\n", 301 cdclk_config->vco, tmp); 302 cdclk_config->cdclk = 190476; 303} 304 305static void pnv_get_cdclk(struct drm_i915_private *dev_priv, 306 struct intel_cdclk_config *cdclk_config) 307{ 308 struct pci_dev *pdev = dev_priv->drm.pdev; 309 u16 gcfgc = 0; 310 311 pci_read_config_word(pdev, GCFGC, &gcfgc); 312 313 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) { 314 case GC_DISPLAY_CLOCK_267_MHZ_PNV: 315 cdclk_config->cdclk = 266667; 316 break; 317 case GC_DISPLAY_CLOCK_333_MHZ_PNV: 318 cdclk_config->cdclk = 333333; 319 break; 320 case GC_DISPLAY_CLOCK_444_MHZ_PNV: 321 cdclk_config->cdclk = 444444; 322 break; 323 case GC_DISPLAY_CLOCK_200_MHZ_PNV: 324 cdclk_config->cdclk = 200000; 325 break; 326 default: 327 drm_err(&dev_priv->drm, 328 "Unknown pnv display core clock 0x%04x\n", gcfgc); 329 fallthrough; 330 case GC_DISPLAY_CLOCK_133_MHZ_PNV: 331 cdclk_config->cdclk = 133333; 332 break; 333 case GC_DISPLAY_CLOCK_167_MHZ_PNV: 334 cdclk_config->cdclk = 166667; 335 break; 336 } 337} 338 339static void i965gm_get_cdclk(struct drm_i915_private *dev_priv, 340 struct intel_cdclk_config *cdclk_config) 341{ 342 struct pci_dev *pdev = dev_priv->drm.pdev; 343 static const u8 div_3200[] = { 16, 10, 8 }; 344 static const u8 div_4000[] = { 20, 12, 10 }; 345 static const u8 div_5333[] = { 24, 16, 14 }; 346 const u8 *div_table; 347 unsigned int cdclk_sel; 348 u16 tmp = 0; 349 350 cdclk_config->vco = intel_hpll_vco(dev_priv); 351 352 pci_read_config_word(pdev, GCFGC, &tmp); 353 354 cdclk_sel = ((tmp >> 8) & 0x1f) - 1; 355 356 if (cdclk_sel >= ARRAY_SIZE(div_3200)) 357 goto fail; 358 359 switch (cdclk_config->vco) { 360 case 3200000: 361 div_table = div_3200; 362 break; 363 case 4000000: 364 div_table = div_4000; 365 break; 366 case 5333333: 367 div_table = div_5333; 368 break; 369 default: 370 goto fail; 371 } 372 373 cdclk_config->cdclk = DIV_ROUND_CLOSEST(cdclk_config->vco, 374 div_table[cdclk_sel]); 375 return; 376 377fail: 378 drm_err(&dev_priv->drm, 379 "Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%04x\n", 380 cdclk_config->vco, tmp); 381 cdclk_config->cdclk = 200000; 382} 383 384static void gm45_get_cdclk(struct drm_i915_private *dev_priv, 385 struct intel_cdclk_config *cdclk_config) 386{ 387 struct pci_dev *pdev = dev_priv->drm.pdev; 388 unsigned int cdclk_sel; 389 u16 tmp = 0; 390 391 cdclk_config->vco = intel_hpll_vco(dev_priv); 392 393 pci_read_config_word(pdev, GCFGC, &tmp); 394 395 cdclk_sel = (tmp >> 12) & 0x1; 396 397 switch (cdclk_config->vco) { 398 case 2666667: 399 case 4000000: 400 case 5333333: 401 cdclk_config->cdclk = cdclk_sel ? 333333 : 222222; 402 break; 403 case 3200000: 404 cdclk_config->cdclk = cdclk_sel ? 320000 : 228571; 405 break; 406 default: 407 drm_err(&dev_priv->drm, 408 "Unable to determine CDCLK. HPLL VCO=%u, CFGC=0x%04x\n", 409 cdclk_config->vco, tmp); 410 cdclk_config->cdclk = 222222; 411 break; 412 } 413} 414 415static void hsw_get_cdclk(struct drm_i915_private *dev_priv, 416 struct intel_cdclk_config *cdclk_config) 417{ 418 u32 lcpll = intel_de_read(dev_priv, LCPLL_CTL); 419 u32 freq = lcpll & LCPLL_CLK_FREQ_MASK; 420 421 if (lcpll & LCPLL_CD_SOURCE_FCLK) 422 cdclk_config->cdclk = 800000; 423 else if (intel_de_read(dev_priv, FUSE_STRAP) & HSW_CDCLK_LIMIT) 424 cdclk_config->cdclk = 450000; 425 else if (freq == LCPLL_CLK_FREQ_450) 426 cdclk_config->cdclk = 450000; 427 else if (IS_HSW_ULT(dev_priv)) 428 cdclk_config->cdclk = 337500; 429 else 430 cdclk_config->cdclk = 540000; 431} 432 433static int vlv_calc_cdclk(struct drm_i915_private *dev_priv, int min_cdclk) 434{ 435 int freq_320 = (dev_priv->hpll_freq << 1) % 320000 != 0 ? 436 333333 : 320000; 437 438 /* 439 * We seem to get an unstable or solid color picture at 200MHz. 440 * Not sure what's wrong. For now use 200MHz only when all pipes 441 * are off. 442 */ 443 if (IS_VALLEYVIEW(dev_priv) && min_cdclk > freq_320) 444 return 400000; 445 else if (min_cdclk > 266667) 446 return freq_320; 447 else if (min_cdclk > 0) 448 return 266667; 449 else 450 return 200000; 451} 452 453static u8 vlv_calc_voltage_level(struct drm_i915_private *dev_priv, int cdclk) 454{ 455 if (IS_VALLEYVIEW(dev_priv)) { 456 if (cdclk >= 320000) /* jump to highest voltage for 400MHz too */ 457 return 2; 458 else if (cdclk >= 266667) 459 return 1; 460 else 461 return 0; 462 } else { 463 /* 464 * Specs are full of misinformation, but testing on actual 465 * hardware has shown that we just need to write the desired 466 * CCK divider into the Punit register. 467 */ 468 return DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1; 469 } 470} 471 472static void vlv_get_cdclk(struct drm_i915_private *dev_priv, 473 struct intel_cdclk_config *cdclk_config) 474{ 475 u32 val; 476 477 vlv_iosf_sb_get(dev_priv, 478 BIT(VLV_IOSF_SB_CCK) | BIT(VLV_IOSF_SB_PUNIT)); 479 480 cdclk_config->vco = vlv_get_hpll_vco(dev_priv); 481 cdclk_config->cdclk = vlv_get_cck_clock(dev_priv, "cdclk", 482 CCK_DISPLAY_CLOCK_CONTROL, 483 cdclk_config->vco); 484 485 val = vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM); 486 487 vlv_iosf_sb_put(dev_priv, 488 BIT(VLV_IOSF_SB_CCK) | BIT(VLV_IOSF_SB_PUNIT)); 489 490 if (IS_VALLEYVIEW(dev_priv)) 491 cdclk_config->voltage_level = (val & DSPFREQGUAR_MASK) >> 492 DSPFREQGUAR_SHIFT; 493 else 494 cdclk_config->voltage_level = (val & DSPFREQGUAR_MASK_CHV) >> 495 DSPFREQGUAR_SHIFT_CHV; 496} 497 498static void vlv_program_pfi_credits(struct drm_i915_private *dev_priv) 499{ 500 unsigned int credits, default_credits; 501 502 if (IS_CHERRYVIEW(dev_priv)) 503 default_credits = PFI_CREDIT(12); 504 else 505 default_credits = PFI_CREDIT(8); 506 507 if (dev_priv->cdclk.hw.cdclk >= dev_priv->czclk_freq) { 508 /* CHV suggested value is 31 or 63 */ 509 if (IS_CHERRYVIEW(dev_priv)) 510 credits = PFI_CREDIT_63; 511 else 512 credits = PFI_CREDIT(15); 513 } else { 514 credits = default_credits; 515 } 516 517 /* 518 * WA - write default credits before re-programming 519 * FIXME: should we also set the resend bit here? 520 */ 521 intel_de_write(dev_priv, GCI_CONTROL, 522 VGA_FAST_MODE_DISABLE | default_credits); 523 524 intel_de_write(dev_priv, GCI_CONTROL, 525 VGA_FAST_MODE_DISABLE | credits | PFI_CREDIT_RESEND); 526 527 /* 528 * FIXME is this guaranteed to clear 529 * immediately or should we poll for it? 530 */ 531 drm_WARN_ON(&dev_priv->drm, 532 intel_de_read(dev_priv, GCI_CONTROL) & PFI_CREDIT_RESEND); 533} 534 535static void vlv_set_cdclk(struct drm_i915_private *dev_priv, 536 const struct intel_cdclk_config *cdclk_config, 537 enum pipe pipe) 538{ 539 int cdclk = cdclk_config->cdclk; 540 u32 val, cmd = cdclk_config->voltage_level; 541 intel_wakeref_t wakeref; 542 543 switch (cdclk) { 544 case 400000: 545 case 333333: 546 case 320000: 547 case 266667: 548 case 200000: 549 break; 550 default: 551 MISSING_CASE(cdclk); 552 return; 553 } 554 555 /* There are cases where we can end up here with power domains 556 * off and a CDCLK frequency other than the minimum, like when 557 * issuing a modeset without actually changing any display after 558 * a system suspend. So grab the display core domain, which covers 559 * the HW blocks needed for the following programming. 560 */ 561 wakeref = intel_display_power_get(dev_priv, POWER_DOMAIN_DISPLAY_CORE); 562 563 vlv_iosf_sb_get(dev_priv, 564 BIT(VLV_IOSF_SB_CCK) | 565 BIT(VLV_IOSF_SB_BUNIT) | 566 BIT(VLV_IOSF_SB_PUNIT)); 567 568 val = vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM); 569 val &= ~DSPFREQGUAR_MASK; 570 val |= (cmd << DSPFREQGUAR_SHIFT); 571 vlv_punit_write(dev_priv, PUNIT_REG_DSPSSPM, val); 572 if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM) & 573 DSPFREQSTAT_MASK) == (cmd << DSPFREQSTAT_SHIFT), 574 50)) { 575 drm_err(&dev_priv->drm, 576 "timed out waiting for CDclk change\n"); 577 } 578 579 if (cdclk == 400000) { 580 u32 divider; 581 582 divider = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, 583 cdclk) - 1; 584 585 /* adjust cdclk divider */ 586 val = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL); 587 val &= ~CCK_FREQUENCY_VALUES; 588 val |= divider; 589 vlv_cck_write(dev_priv, CCK_DISPLAY_CLOCK_CONTROL, val); 590 591 if (wait_for((vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL) & 592 CCK_FREQUENCY_STATUS) == (divider << CCK_FREQUENCY_STATUS_SHIFT), 593 50)) 594 drm_err(&dev_priv->drm, 595 "timed out waiting for CDclk change\n"); 596 } 597 598 /* adjust self-refresh exit latency value */ 599 val = vlv_bunit_read(dev_priv, BUNIT_REG_BISOC); 600 val &= ~0x7f; 601 602 /* 603 * For high bandwidth configs, we set a higher latency in the bunit 604 * so that the core display fetch happens in time to avoid underruns. 605 */ 606 if (cdclk == 400000) 607 val |= 4500 / 250; /* 4.5 usec */ 608 else 609 val |= 3000 / 250; /* 3.0 usec */ 610 vlv_bunit_write(dev_priv, BUNIT_REG_BISOC, val); 611 612 vlv_iosf_sb_put(dev_priv, 613 BIT(VLV_IOSF_SB_CCK) | 614 BIT(VLV_IOSF_SB_BUNIT) | 615 BIT(VLV_IOSF_SB_PUNIT)); 616 617 intel_update_cdclk(dev_priv); 618 619 vlv_program_pfi_credits(dev_priv); 620 621 intel_display_power_put(dev_priv, POWER_DOMAIN_DISPLAY_CORE, wakeref); 622} 623 624static void chv_set_cdclk(struct drm_i915_private *dev_priv, 625 const struct intel_cdclk_config *cdclk_config, 626 enum pipe pipe) 627{ 628 int cdclk = cdclk_config->cdclk; 629 u32 val, cmd = cdclk_config->voltage_level; 630 intel_wakeref_t wakeref; 631 632 switch (cdclk) { 633 case 333333: 634 case 320000: 635 case 266667: 636 case 200000: 637 break; 638 default: 639 MISSING_CASE(cdclk); 640 return; 641 } 642 643 /* There are cases where we can end up here with power domains 644 * off and a CDCLK frequency other than the minimum, like when 645 * issuing a modeset without actually changing any display after 646 * a system suspend. So grab the display core domain, which covers 647 * the HW blocks needed for the following programming. 648 */ 649 wakeref = intel_display_power_get(dev_priv, POWER_DOMAIN_DISPLAY_CORE); 650 651 vlv_punit_get(dev_priv); 652 val = vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM); 653 val &= ~DSPFREQGUAR_MASK_CHV; 654 val |= (cmd << DSPFREQGUAR_SHIFT_CHV); 655 vlv_punit_write(dev_priv, PUNIT_REG_DSPSSPM, val); 656 if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM) & 657 DSPFREQSTAT_MASK_CHV) == (cmd << DSPFREQSTAT_SHIFT_CHV), 658 50)) { 659 drm_err(&dev_priv->drm, 660 "timed out waiting for CDclk change\n"); 661 } 662 663 vlv_punit_put(dev_priv); 664 665 intel_update_cdclk(dev_priv); 666 667 vlv_program_pfi_credits(dev_priv); 668 669 intel_display_power_put(dev_priv, POWER_DOMAIN_DISPLAY_CORE, wakeref); 670} 671 672static int bdw_calc_cdclk(int min_cdclk) 673{ 674 if (min_cdclk > 540000) 675 return 675000; 676 else if (min_cdclk > 450000) 677 return 540000; 678 else if (min_cdclk > 337500) 679 return 450000; 680 else 681 return 337500; 682} 683 684static u8 bdw_calc_voltage_level(int cdclk) 685{ 686 switch (cdclk) { 687 default: 688 case 337500: 689 return 2; 690 case 450000: 691 return 0; 692 case 540000: 693 return 1; 694 case 675000: 695 return 3; 696 } 697} 698 699static void bdw_get_cdclk(struct drm_i915_private *dev_priv, 700 struct intel_cdclk_config *cdclk_config) 701{ 702 u32 lcpll = intel_de_read(dev_priv, LCPLL_CTL); 703 u32 freq = lcpll & LCPLL_CLK_FREQ_MASK; 704 705 if (lcpll & LCPLL_CD_SOURCE_FCLK) 706 cdclk_config->cdclk = 800000; 707 else if (intel_de_read(dev_priv, FUSE_STRAP) & HSW_CDCLK_LIMIT) 708 cdclk_config->cdclk = 450000; 709 else if (freq == LCPLL_CLK_FREQ_450) 710 cdclk_config->cdclk = 450000; 711 else if (freq == LCPLL_CLK_FREQ_54O_BDW) 712 cdclk_config->cdclk = 540000; 713 else if (freq == LCPLL_CLK_FREQ_337_5_BDW) 714 cdclk_config->cdclk = 337500; 715 else 716 cdclk_config->cdclk = 675000; 717 718 /* 719 * Can't read this out :( Let's assume it's 720 * at least what the CDCLK frequency requires. 721 */ 722 cdclk_config->voltage_level = 723 bdw_calc_voltage_level(cdclk_config->cdclk); 724} 725 726static void bdw_set_cdclk(struct drm_i915_private *dev_priv, 727 const struct intel_cdclk_config *cdclk_config, 728 enum pipe pipe) 729{ 730 int cdclk = cdclk_config->cdclk; 731 u32 val; 732 int ret; 733 734 if (drm_WARN(&dev_priv->drm, 735 (intel_de_read(dev_priv, LCPLL_CTL) & 736 (LCPLL_PLL_DISABLE | LCPLL_PLL_LOCK | 737 LCPLL_CD_CLOCK_DISABLE | LCPLL_ROOT_CD_CLOCK_DISABLE | 738 LCPLL_CD2X_CLOCK_DISABLE | LCPLL_POWER_DOWN_ALLOW | 739 LCPLL_CD_SOURCE_FCLK)) != LCPLL_PLL_LOCK, 740 "trying to change cdclk frequency with cdclk not enabled\n")) 741 return; 742 743 ret = sandybridge_pcode_write(dev_priv, 744 BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0); 745 if (ret) { 746 drm_err(&dev_priv->drm, 747 "failed to inform pcode about cdclk change\n"); 748 return; 749 } 750 751 val = intel_de_read(dev_priv, LCPLL_CTL); 752 val |= LCPLL_CD_SOURCE_FCLK; 753 intel_de_write(dev_priv, LCPLL_CTL, val); 754 755 /* 756 * According to the spec, it should be enough to poll for this 1 us. 757 * However, extensive testing shows that this can take longer. 758 */ 759 if (wait_for_us(intel_de_read(dev_priv, LCPLL_CTL) & 760 LCPLL_CD_SOURCE_FCLK_DONE, 100)) 761 drm_err(&dev_priv->drm, "Switching to FCLK failed\n"); 762 763 val = intel_de_read(dev_priv, LCPLL_CTL); 764 val &= ~LCPLL_CLK_FREQ_MASK; 765 766 switch (cdclk) { 767 default: 768 MISSING_CASE(cdclk); 769 fallthrough; 770 case 337500: 771 val |= LCPLL_CLK_FREQ_337_5_BDW; 772 break; 773 case 450000: 774 val |= LCPLL_CLK_FREQ_450; 775 break; 776 case 540000: 777 val |= LCPLL_CLK_FREQ_54O_BDW; 778 break; 779 case 675000: 780 val |= LCPLL_CLK_FREQ_675_BDW; 781 break; 782 } 783 784 intel_de_write(dev_priv, LCPLL_CTL, val); 785 786 val = intel_de_read(dev_priv, LCPLL_CTL); 787 val &= ~LCPLL_CD_SOURCE_FCLK; 788 intel_de_write(dev_priv, LCPLL_CTL, val); 789 790 if (wait_for_us((intel_de_read(dev_priv, LCPLL_CTL) & 791 LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1)) 792 drm_err(&dev_priv->drm, "Switching back to LCPLL failed\n"); 793 794 sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ, 795 cdclk_config->voltage_level); 796 797 intel_de_write(dev_priv, CDCLK_FREQ, 798 DIV_ROUND_CLOSEST(cdclk, 1000) - 1); 799 800 intel_update_cdclk(dev_priv); 801} 802 803static int skl_calc_cdclk(int min_cdclk, int vco) 804{ 805 if (vco == 8640000) { 806 if (min_cdclk > 540000) 807 return 617143; 808 else if (min_cdclk > 432000) 809 return 540000; 810 else if (min_cdclk > 308571) 811 return 432000; 812 else 813 return 308571; 814 } else { 815 if (min_cdclk > 540000) 816 return 675000; 817 else if (min_cdclk > 450000) 818 return 540000; 819 else if (min_cdclk > 337500) 820 return 450000; 821 else 822 return 337500; 823 } 824} 825 826static u8 skl_calc_voltage_level(int cdclk) 827{ 828 if (cdclk > 540000) 829 return 3; 830 else if (cdclk > 450000) 831 return 2; 832 else if (cdclk > 337500) 833 return 1; 834 else 835 return 0; 836} 837 838static void skl_dpll0_update(struct drm_i915_private *dev_priv, 839 struct intel_cdclk_config *cdclk_config) 840{ 841 u32 val; 842 843 cdclk_config->ref = 24000; 844 cdclk_config->vco = 0; 845 846 val = intel_de_read(dev_priv, LCPLL1_CTL); 847 if ((val & LCPLL_PLL_ENABLE) == 0) 848 return; 849 850 if (drm_WARN_ON(&dev_priv->drm, (val & LCPLL_PLL_LOCK) == 0)) 851 return; 852 853 val = intel_de_read(dev_priv, DPLL_CTRL1); 854 855 if (drm_WARN_ON(&dev_priv->drm, 856 (val & (DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) | 857 DPLL_CTRL1_SSC(SKL_DPLL0) | 858 DPLL_CTRL1_OVERRIDE(SKL_DPLL0))) != 859 DPLL_CTRL1_OVERRIDE(SKL_DPLL0))) 860 return; 861 862 switch (val & DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0)) { 863 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810, SKL_DPLL0): 864 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1350, SKL_DPLL0): 865 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1620, SKL_DPLL0): 866 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2700, SKL_DPLL0): 867 cdclk_config->vco = 8100000; 868 break; 869 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080, SKL_DPLL0): 870 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2160, SKL_DPLL0): 871 cdclk_config->vco = 8640000; 872 break; 873 default: 874 MISSING_CASE(val & DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0)); 875 break; 876 } 877} 878 879static void skl_get_cdclk(struct drm_i915_private *dev_priv, 880 struct intel_cdclk_config *cdclk_config) 881{ 882 u32 cdctl; 883 884 skl_dpll0_update(dev_priv, cdclk_config); 885 886 cdclk_config->cdclk = cdclk_config->bypass = cdclk_config->ref; 887 888 if (cdclk_config->vco == 0) 889 goto out; 890 891 cdctl = intel_de_read(dev_priv, CDCLK_CTL); 892 893 if (cdclk_config->vco == 8640000) { 894 switch (cdctl & CDCLK_FREQ_SEL_MASK) { 895 case CDCLK_FREQ_450_432: 896 cdclk_config->cdclk = 432000; 897 break; 898 case CDCLK_FREQ_337_308: 899 cdclk_config->cdclk = 308571; 900 break; 901 case CDCLK_FREQ_540: 902 cdclk_config->cdclk = 540000; 903 break; 904 case CDCLK_FREQ_675_617: 905 cdclk_config->cdclk = 617143; 906 break; 907 default: 908 MISSING_CASE(cdctl & CDCLK_FREQ_SEL_MASK); 909 break; 910 } 911 } else { 912 switch (cdctl & CDCLK_FREQ_SEL_MASK) { 913 case CDCLK_FREQ_450_432: 914 cdclk_config->cdclk = 450000; 915 break; 916 case CDCLK_FREQ_337_308: 917 cdclk_config->cdclk = 337500; 918 break; 919 case CDCLK_FREQ_540: 920 cdclk_config->cdclk = 540000; 921 break; 922 case CDCLK_FREQ_675_617: 923 cdclk_config->cdclk = 675000; 924 break; 925 default: 926 MISSING_CASE(cdctl & CDCLK_FREQ_SEL_MASK); 927 break; 928 } 929 } 930 931 out: 932 /* 933 * Can't read this out :( Let's assume it's 934 * at least what the CDCLK frequency requires. 935 */ 936 cdclk_config->voltage_level = 937 skl_calc_voltage_level(cdclk_config->cdclk); 938} 939 940/* convert from kHz to .1 fixpoint MHz with -1MHz offset */ 941static int skl_cdclk_decimal(int cdclk) 942{ 943 return DIV_ROUND_CLOSEST(cdclk - 1000, 500); 944} 945 946static void skl_set_preferred_cdclk_vco(struct drm_i915_private *dev_priv, 947 int vco) 948{ 949 bool changed = dev_priv->skl_preferred_vco_freq != vco; 950 951 dev_priv->skl_preferred_vco_freq = vco; 952 953 if (changed) 954 intel_update_max_cdclk(dev_priv); 955} 956 957static void skl_dpll0_enable(struct drm_i915_private *dev_priv, int vco) 958{ 959 u32 val; 960 961 drm_WARN_ON(&dev_priv->drm, vco != 8100000 && vco != 8640000); 962 963 /* 964 * We always enable DPLL0 with the lowest link rate possible, but still 965 * taking into account the VCO required to operate the eDP panel at the 966 * desired frequency. The usual DP link rates operate with a VCO of 967 * 8100 while the eDP 1.4 alternate link rates need a VCO of 8640. 968 * The modeset code is responsible for the selection of the exact link 969 * rate later on, with the constraint of choosing a frequency that 970 * works with vco. 971 */ 972 val = intel_de_read(dev_priv, DPLL_CTRL1); 973 974 val &= ~(DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) | DPLL_CTRL1_SSC(SKL_DPLL0) | 975 DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0)); 976 val |= DPLL_CTRL1_OVERRIDE(SKL_DPLL0); 977 if (vco == 8640000) 978 val |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080, 979 SKL_DPLL0); 980 else 981 val |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810, 982 SKL_DPLL0); 983 984 intel_de_write(dev_priv, DPLL_CTRL1, val); 985 intel_de_posting_read(dev_priv, DPLL_CTRL1); 986 987 intel_de_write(dev_priv, LCPLL1_CTL, 988 intel_de_read(dev_priv, LCPLL1_CTL) | LCPLL_PLL_ENABLE); 989 990 if (intel_de_wait_for_set(dev_priv, LCPLL1_CTL, LCPLL_PLL_LOCK, 5)) 991 drm_err(&dev_priv->drm, "DPLL0 not locked\n"); 992 993 dev_priv->cdclk.hw.vco = vco; 994 995 /* We'll want to keep using the current vco from now on. */ 996 skl_set_preferred_cdclk_vco(dev_priv, vco); 997} 998 999static void skl_dpll0_disable(struct drm_i915_private *dev_priv) 1000{ 1001 intel_de_write(dev_priv, LCPLL1_CTL, 1002 intel_de_read(dev_priv, LCPLL1_CTL) & ~LCPLL_PLL_ENABLE); 1003 if (intel_de_wait_for_clear(dev_priv, LCPLL1_CTL, LCPLL_PLL_LOCK, 1)) 1004 drm_err(&dev_priv->drm, "Couldn't disable DPLL0\n"); 1005 1006 dev_priv->cdclk.hw.vco = 0; 1007} 1008 1009static void skl_set_cdclk(struct drm_i915_private *dev_priv, 1010 const struct intel_cdclk_config *cdclk_config, 1011 enum pipe pipe) 1012{ 1013 int cdclk = cdclk_config->cdclk; 1014 int vco = cdclk_config->vco; 1015 u32 freq_select, cdclk_ctl; 1016 int ret; 1017 1018 /* 1019 * Based on WA#1183 CDCLK rates 308 and 617MHz CDCLK rates are 1020 * unsupported on SKL. In theory this should never happen since only 1021 * the eDP1.4 2.16 and 4.32Gbps rates require it, but eDP1.4 is not 1022 * supported on SKL either, see the above WA. WARN whenever trying to 1023 * use the corresponding VCO freq as that always leads to using the 1024 * minimum 308MHz CDCLK. 1025 */ 1026 drm_WARN_ON_ONCE(&dev_priv->drm, 1027 IS_SKYLAKE(dev_priv) && vco == 8640000); 1028 1029 ret = skl_pcode_request(dev_priv, SKL_PCODE_CDCLK_CONTROL, 1030 SKL_CDCLK_PREPARE_FOR_CHANGE, 1031 SKL_CDCLK_READY_FOR_CHANGE, 1032 SKL_CDCLK_READY_FOR_CHANGE, 3); 1033 if (ret) { 1034 drm_err(&dev_priv->drm, 1035 "Failed to inform PCU about cdclk change (%d)\n", ret); 1036 return; 1037 } 1038 1039 /* Choose frequency for this cdclk */ 1040 switch (cdclk) { 1041 default: 1042 drm_WARN_ON(&dev_priv->drm, 1043 cdclk != dev_priv->cdclk.hw.bypass); 1044 drm_WARN_ON(&dev_priv->drm, vco != 0); 1045 fallthrough; 1046 case 308571: 1047 case 337500: 1048 freq_select = CDCLK_FREQ_337_308; 1049 break; 1050 case 450000: 1051 case 432000: 1052 freq_select = CDCLK_FREQ_450_432; 1053 break; 1054 case 540000: 1055 freq_select = CDCLK_FREQ_540; 1056 break; 1057 case 617143: 1058 case 675000: 1059 freq_select = CDCLK_FREQ_675_617; 1060 break; 1061 } 1062 1063 if (dev_priv->cdclk.hw.vco != 0 && 1064 dev_priv->cdclk.hw.vco != vco) 1065 skl_dpll0_disable(dev_priv); 1066 1067 cdclk_ctl = intel_de_read(dev_priv, CDCLK_CTL); 1068 1069 if (dev_priv->cdclk.hw.vco != vco) { 1070 /* Wa Display #1183: skl,kbl,cfl */ 1071 cdclk_ctl &= ~(CDCLK_FREQ_SEL_MASK | CDCLK_FREQ_DECIMAL_MASK); 1072 cdclk_ctl |= freq_select | skl_cdclk_decimal(cdclk); 1073 intel_de_write(dev_priv, CDCLK_CTL, cdclk_ctl); 1074 } 1075 1076 /* Wa Display #1183: skl,kbl,cfl */ 1077 cdclk_ctl |= CDCLK_DIVMUX_CD_OVERRIDE; 1078 intel_de_write(dev_priv, CDCLK_CTL, cdclk_ctl); 1079 intel_de_posting_read(dev_priv, CDCLK_CTL); 1080 1081 if (dev_priv->cdclk.hw.vco != vco) 1082 skl_dpll0_enable(dev_priv, vco); 1083 1084 /* Wa Display #1183: skl,kbl,cfl */ 1085 cdclk_ctl &= ~(CDCLK_FREQ_SEL_MASK | CDCLK_FREQ_DECIMAL_MASK); 1086 intel_de_write(dev_priv, CDCLK_CTL, cdclk_ctl); 1087 1088 cdclk_ctl |= freq_select | skl_cdclk_decimal(cdclk); 1089 intel_de_write(dev_priv, CDCLK_CTL, cdclk_ctl); 1090 1091 /* Wa Display #1183: skl,kbl,cfl */ 1092 cdclk_ctl &= ~CDCLK_DIVMUX_CD_OVERRIDE; 1093 intel_de_write(dev_priv, CDCLK_CTL, cdclk_ctl); 1094 intel_de_posting_read(dev_priv, CDCLK_CTL); 1095 1096 /* inform PCU of the change */ 1097 sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL, 1098 cdclk_config->voltage_level); 1099 1100 intel_update_cdclk(dev_priv); 1101} 1102 1103static void skl_sanitize_cdclk(struct drm_i915_private *dev_priv) 1104{ 1105 u32 cdctl, expected; 1106 1107 /* 1108 * check if the pre-os initialized the display 1109 * There is SWF18 scratchpad register defined which is set by the 1110 * pre-os which can be used by the OS drivers to check the status 1111 */ 1112 if ((intel_de_read(dev_priv, SWF_ILK(0x18)) & 0x00FFFFFF) == 0) 1113 goto sanitize; 1114 1115 intel_update_cdclk(dev_priv); 1116 intel_dump_cdclk_config(&dev_priv->cdclk.hw, "Current CDCLK"); 1117 1118 /* Is PLL enabled and locked ? */ 1119 if (dev_priv->cdclk.hw.vco == 0 || 1120 dev_priv->cdclk.hw.cdclk == dev_priv->cdclk.hw.bypass) 1121 goto sanitize; 1122 1123 /* DPLL okay; verify the cdclock 1124 * 1125 * Noticed in some instances that the freq selection is correct but 1126 * decimal part is programmed wrong from BIOS where pre-os does not 1127 * enable display. Verify the same as well. 1128 */ 1129 cdctl = intel_de_read(dev_priv, CDCLK_CTL); 1130 expected = (cdctl & CDCLK_FREQ_SEL_MASK) | 1131 skl_cdclk_decimal(dev_priv->cdclk.hw.cdclk); 1132 if (cdctl == expected) 1133 /* All well; nothing to sanitize */ 1134 return; 1135 1136sanitize: 1137 drm_dbg_kms(&dev_priv->drm, "Sanitizing cdclk programmed by pre-os\n"); 1138 1139 /* force cdclk programming */ 1140 dev_priv->cdclk.hw.cdclk = 0; 1141 /* force full PLL disable + enable */ 1142 dev_priv->cdclk.hw.vco = -1; 1143} 1144 1145static void skl_cdclk_init_hw(struct drm_i915_private *dev_priv) 1146{ 1147 struct intel_cdclk_config cdclk_config; 1148 1149 skl_sanitize_cdclk(dev_priv); 1150 1151 if (dev_priv->cdclk.hw.cdclk != 0 && 1152 dev_priv->cdclk.hw.vco != 0) { 1153 /* 1154 * Use the current vco as our initial 1155 * guess as to what the preferred vco is. 1156 */ 1157 if (dev_priv->skl_preferred_vco_freq == 0) 1158 skl_set_preferred_cdclk_vco(dev_priv, 1159 dev_priv->cdclk.hw.vco); 1160 return; 1161 } 1162 1163 cdclk_config = dev_priv->cdclk.hw; 1164 1165 cdclk_config.vco = dev_priv->skl_preferred_vco_freq; 1166 if (cdclk_config.vco == 0) 1167 cdclk_config.vco = 8100000; 1168 cdclk_config.cdclk = skl_calc_cdclk(0, cdclk_config.vco); 1169 cdclk_config.voltage_level = skl_calc_voltage_level(cdclk_config.cdclk); 1170 1171 skl_set_cdclk(dev_priv, &cdclk_config, INVALID_PIPE); 1172} 1173 1174static void skl_cdclk_uninit_hw(struct drm_i915_private *dev_priv) 1175{ 1176 struct intel_cdclk_config cdclk_config = dev_priv->cdclk.hw; 1177 1178 cdclk_config.cdclk = cdclk_config.bypass; 1179 cdclk_config.vco = 0; 1180 cdclk_config.voltage_level = skl_calc_voltage_level(cdclk_config.cdclk); 1181 1182 skl_set_cdclk(dev_priv, &cdclk_config, INVALID_PIPE); 1183} 1184 1185static const struct intel_cdclk_vals bxt_cdclk_table[] = { 1186 { .refclk = 19200, .cdclk = 144000, .divider = 8, .ratio = 60 }, 1187 { .refclk = 19200, .cdclk = 288000, .divider = 4, .ratio = 60 }, 1188 { .refclk = 19200, .cdclk = 384000, .divider = 3, .ratio = 60 }, 1189 { .refclk = 19200, .cdclk = 576000, .divider = 2, .ratio = 60 }, 1190 { .refclk = 19200, .cdclk = 624000, .divider = 2, .ratio = 65 }, 1191 {} 1192}; 1193 1194static const struct intel_cdclk_vals glk_cdclk_table[] = { 1195 { .refclk = 19200, .cdclk = 79200, .divider = 8, .ratio = 33 }, 1196 { .refclk = 19200, .cdclk = 158400, .divider = 4, .ratio = 33 }, 1197 { .refclk = 19200, .cdclk = 316800, .divider = 2, .ratio = 33 }, 1198 {} 1199}; 1200 1201static const struct intel_cdclk_vals cnl_cdclk_table[] = { 1202 { .refclk = 19200, .cdclk = 168000, .divider = 4, .ratio = 35 }, 1203 { .refclk = 19200, .cdclk = 336000, .divider = 2, .ratio = 35 }, 1204 { .refclk = 19200, .cdclk = 528000, .divider = 2, .ratio = 55 }, 1205 1206 { .refclk = 24000, .cdclk = 168000, .divider = 4, .ratio = 28 }, 1207 { .refclk = 24000, .cdclk = 336000, .divider = 2, .ratio = 28 }, 1208 { .refclk = 24000, .cdclk = 528000, .divider = 2, .ratio = 44 }, 1209 {} 1210}; 1211 1212static const struct intel_cdclk_vals icl_cdclk_table[] = { 1213 { .refclk = 19200, .cdclk = 172800, .divider = 2, .ratio = 18 }, 1214 { .refclk = 19200, .cdclk = 192000, .divider = 2, .ratio = 20 }, 1215 { .refclk = 19200, .cdclk = 307200, .divider = 2, .ratio = 32 }, 1216 { .refclk = 19200, .cdclk = 326400, .divider = 4, .ratio = 68 }, 1217 { .refclk = 19200, .cdclk = 556800, .divider = 2, .ratio = 58 }, 1218 { .refclk = 19200, .cdclk = 652800, .divider = 2, .ratio = 68 }, 1219 1220 { .refclk = 24000, .cdclk = 180000, .divider = 2, .ratio = 15 }, 1221 { .refclk = 24000, .cdclk = 192000, .divider = 2, .ratio = 16 }, 1222 { .refclk = 24000, .cdclk = 312000, .divider = 2, .ratio = 26 }, 1223 { .refclk = 24000, .cdclk = 324000, .divider = 4, .ratio = 54 }, 1224 { .refclk = 24000, .cdclk = 552000, .divider = 2, .ratio = 46 }, 1225 { .refclk = 24000, .cdclk = 648000, .divider = 2, .ratio = 54 }, 1226 1227 { .refclk = 38400, .cdclk = 172800, .divider = 2, .ratio = 9 }, 1228 { .refclk = 38400, .cdclk = 192000, .divider = 2, .ratio = 10 }, 1229 { .refclk = 38400, .cdclk = 307200, .divider = 2, .ratio = 16 }, 1230 { .refclk = 38400, .cdclk = 326400, .divider = 4, .ratio = 34 }, 1231 { .refclk = 38400, .cdclk = 556800, .divider = 2, .ratio = 29 }, 1232 { .refclk = 38400, .cdclk = 652800, .divider = 2, .ratio = 34 }, 1233 {} 1234}; 1235 1236static int bxt_calc_cdclk(struct drm_i915_private *dev_priv, int min_cdclk) 1237{ 1238 const struct intel_cdclk_vals *table = dev_priv->cdclk.table; 1239 int i; 1240 1241 for (i = 0; table[i].refclk; i++) 1242 if (table[i].refclk == dev_priv->cdclk.hw.ref && 1243 table[i].cdclk >= min_cdclk) 1244 return table[i].cdclk; 1245 1246 drm_WARN(&dev_priv->drm, 1, 1247 "Cannot satisfy minimum cdclk %d with refclk %u\n", 1248 min_cdclk, dev_priv->cdclk.hw.ref); 1249 return 0; 1250} 1251 1252static int bxt_calc_cdclk_pll_vco(struct drm_i915_private *dev_priv, int cdclk) 1253{ 1254 const struct intel_cdclk_vals *table = dev_priv->cdclk.table; 1255 int i; 1256 1257 if (cdclk == dev_priv->cdclk.hw.bypass) 1258 return 0; 1259 1260 for (i = 0; table[i].refclk; i++) 1261 if (table[i].refclk == dev_priv->cdclk.hw.ref && 1262 table[i].cdclk == cdclk) 1263 return dev_priv->cdclk.hw.ref * table[i].ratio; 1264 1265 drm_WARN(&dev_priv->drm, 1, "cdclk %d not valid for refclk %u\n", 1266 cdclk, dev_priv->cdclk.hw.ref); 1267 return 0; 1268} 1269 1270static u8 bxt_calc_voltage_level(int cdclk) 1271{ 1272 return DIV_ROUND_UP(cdclk, 25000); 1273} 1274 1275static u8 cnl_calc_voltage_level(int cdclk) 1276{ 1277 if (cdclk > 336000) 1278 return 2; 1279 else if (cdclk > 168000) 1280 return 1; 1281 else 1282 return 0; 1283} 1284 1285static u8 icl_calc_voltage_level(int cdclk) 1286{ 1287 if (cdclk > 556800) 1288 return 2; 1289 else if (cdclk > 312000) 1290 return 1; 1291 else 1292 return 0; 1293} 1294 1295static u8 ehl_calc_voltage_level(int cdclk) 1296{ 1297 if (cdclk > 326400) 1298 return 3; 1299 else if (cdclk > 312000) 1300 return 2; 1301 else if (cdclk > 180000) 1302 return 1; 1303 else 1304 return 0; 1305} 1306 1307static u8 tgl_calc_voltage_level(int cdclk) 1308{ 1309 if (cdclk > 556800) 1310 return 3; 1311 else if (cdclk > 326400) 1312 return 2; 1313 else if (cdclk > 312000) 1314 return 1; 1315 else 1316 return 0; 1317} 1318 1319static void cnl_readout_refclk(struct drm_i915_private *dev_priv, 1320 struct intel_cdclk_config *cdclk_config) 1321{ 1322 if (intel_de_read(dev_priv, SKL_DSSM) & CNL_DSSM_CDCLK_PLL_REFCLK_24MHz) 1323 cdclk_config->ref = 24000; 1324 else 1325 cdclk_config->ref = 19200; 1326} 1327 1328static void icl_readout_refclk(struct drm_i915_private *dev_priv, 1329 struct intel_cdclk_config *cdclk_config) 1330{ 1331 u32 dssm = intel_de_read(dev_priv, SKL_DSSM) & ICL_DSSM_CDCLK_PLL_REFCLK_MASK; 1332 1333 switch (dssm) { 1334 default: 1335 MISSING_CASE(dssm); 1336 fallthrough; 1337 case ICL_DSSM_CDCLK_PLL_REFCLK_24MHz: 1338 cdclk_config->ref = 24000; 1339 break; 1340 case ICL_DSSM_CDCLK_PLL_REFCLK_19_2MHz: 1341 cdclk_config->ref = 19200; 1342 break; 1343 case ICL_DSSM_CDCLK_PLL_REFCLK_38_4MHz: 1344 cdclk_config->ref = 38400; 1345 break; 1346 } 1347} 1348 1349static void bxt_de_pll_readout(struct drm_i915_private *dev_priv, 1350 struct intel_cdclk_config *cdclk_config) 1351{ 1352 u32 val, ratio; 1353 1354 if (INTEL_GEN(dev_priv) >= 11) 1355 icl_readout_refclk(dev_priv, cdclk_config); 1356 else if (IS_CANNONLAKE(dev_priv)) 1357 cnl_readout_refclk(dev_priv, cdclk_config); 1358 else 1359 cdclk_config->ref = 19200; 1360 1361 val = intel_de_read(dev_priv, BXT_DE_PLL_ENABLE); 1362 if ((val & BXT_DE_PLL_PLL_ENABLE) == 0 || 1363 (val & BXT_DE_PLL_LOCK) == 0) { 1364 /* 1365 * CDCLK PLL is disabled, the VCO/ratio doesn't matter, but 1366 * setting it to zero is a way to signal that. 1367 */ 1368 cdclk_config->vco = 0; 1369 return; 1370 } 1371 1372 /* 1373 * CNL+ have the ratio directly in the PLL enable register, gen9lp had 1374 * it in a separate PLL control register. 1375 */ 1376 if (INTEL_GEN(dev_priv) >= 10) 1377 ratio = val & CNL_CDCLK_PLL_RATIO_MASK; 1378 else 1379 ratio = intel_de_read(dev_priv, BXT_DE_PLL_CTL) & BXT_DE_PLL_RATIO_MASK; 1380 1381 cdclk_config->vco = ratio * cdclk_config->ref; 1382} 1383 1384static void bxt_get_cdclk(struct drm_i915_private *dev_priv, 1385 struct intel_cdclk_config *cdclk_config) 1386{ 1387 u32 divider; 1388 int div; 1389 1390 bxt_de_pll_readout(dev_priv, cdclk_config); 1391 1392 if (INTEL_GEN(dev_priv) >= 12) 1393 cdclk_config->bypass = cdclk_config->ref / 2; 1394 else if (INTEL_GEN(dev_priv) >= 11) 1395 cdclk_config->bypass = 50000; 1396 else 1397 cdclk_config->bypass = cdclk_config->ref; 1398 1399 if (cdclk_config->vco == 0) { 1400 cdclk_config->cdclk = cdclk_config->bypass; 1401 goto out; 1402 } 1403 1404 divider = intel_de_read(dev_priv, CDCLK_CTL) & BXT_CDCLK_CD2X_DIV_SEL_MASK; 1405 1406 switch (divider) { 1407 case BXT_CDCLK_CD2X_DIV_SEL_1: 1408 div = 2; 1409 break; 1410 case BXT_CDCLK_CD2X_DIV_SEL_1_5: 1411 drm_WARN(&dev_priv->drm, 1412 IS_GEMINILAKE(dev_priv) || INTEL_GEN(dev_priv) >= 10, 1413 "Unsupported divider\n"); 1414 div = 3; 1415 break; 1416 case BXT_CDCLK_CD2X_DIV_SEL_2: 1417 div = 4; 1418 break; 1419 case BXT_CDCLK_CD2X_DIV_SEL_4: 1420 drm_WARN(&dev_priv->drm, INTEL_GEN(dev_priv) >= 10, 1421 "Unsupported divider\n"); 1422 div = 8; 1423 break; 1424 default: 1425 MISSING_CASE(divider); 1426 return; 1427 } 1428 1429 cdclk_config->cdclk = DIV_ROUND_CLOSEST(cdclk_config->vco, div); 1430 1431 out: 1432 /* 1433 * Can't read this out :( Let's assume it's 1434 * at least what the CDCLK frequency requires. 1435 */ 1436 cdclk_config->voltage_level = 1437 dev_priv->display.calc_voltage_level(cdclk_config->cdclk); 1438} 1439 1440static void bxt_de_pll_disable(struct drm_i915_private *dev_priv) 1441{ 1442 intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, 0); 1443 1444 /* Timeout 200us */ 1445 if (intel_de_wait_for_clear(dev_priv, 1446 BXT_DE_PLL_ENABLE, BXT_DE_PLL_LOCK, 1)) 1447 drm_err(&dev_priv->drm, "timeout waiting for DE PLL unlock\n"); 1448 1449 dev_priv->cdclk.hw.vco = 0; 1450} 1451 1452static void bxt_de_pll_enable(struct drm_i915_private *dev_priv, int vco) 1453{ 1454 int ratio = DIV_ROUND_CLOSEST(vco, dev_priv->cdclk.hw.ref); 1455 u32 val; 1456 1457 val = intel_de_read(dev_priv, BXT_DE_PLL_CTL); 1458 val &= ~BXT_DE_PLL_RATIO_MASK; 1459 val |= BXT_DE_PLL_RATIO(ratio); 1460 intel_de_write(dev_priv, BXT_DE_PLL_CTL, val); 1461 1462 intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, BXT_DE_PLL_PLL_ENABLE); 1463 1464 /* Timeout 200us */ 1465 if (intel_de_wait_for_set(dev_priv, 1466 BXT_DE_PLL_ENABLE, BXT_DE_PLL_LOCK, 1)) 1467 drm_err(&dev_priv->drm, "timeout waiting for DE PLL lock\n"); 1468 1469 dev_priv->cdclk.hw.vco = vco; 1470} 1471 1472static void cnl_cdclk_pll_disable(struct drm_i915_private *dev_priv) 1473{ 1474 u32 val; 1475 1476 val = intel_de_read(dev_priv, BXT_DE_PLL_ENABLE); 1477 val &= ~BXT_DE_PLL_PLL_ENABLE; 1478 intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, val); 1479 1480 /* Timeout 200us */ 1481 if (wait_for((intel_de_read(dev_priv, BXT_DE_PLL_ENABLE) & BXT_DE_PLL_LOCK) == 0, 1)) 1482 drm_err(&dev_priv->drm, 1483 "timeout waiting for CDCLK PLL unlock\n"); 1484 1485 dev_priv->cdclk.hw.vco = 0; 1486} 1487 1488static void cnl_cdclk_pll_enable(struct drm_i915_private *dev_priv, int vco) 1489{ 1490 int ratio = DIV_ROUND_CLOSEST(vco, dev_priv->cdclk.hw.ref); 1491 u32 val; 1492 1493 val = CNL_CDCLK_PLL_RATIO(ratio); 1494 intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, val); 1495 1496 val |= BXT_DE_PLL_PLL_ENABLE; 1497 intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, val); 1498 1499 /* Timeout 200us */ 1500 if (wait_for((intel_de_read(dev_priv, BXT_DE_PLL_ENABLE) & BXT_DE_PLL_LOCK) != 0, 1)) 1501 drm_err(&dev_priv->drm, 1502 "timeout waiting for CDCLK PLL lock\n"); 1503 1504 dev_priv->cdclk.hw.vco = vco; 1505} 1506 1507static u32 bxt_cdclk_cd2x_pipe(struct drm_i915_private *dev_priv, enum pipe pipe) 1508{ 1509 if (INTEL_GEN(dev_priv) >= 12) { 1510 if (pipe == INVALID_PIPE) 1511 return TGL_CDCLK_CD2X_PIPE_NONE; 1512 else 1513 return TGL_CDCLK_CD2X_PIPE(pipe); 1514 } else if (INTEL_GEN(dev_priv) >= 11) { 1515 if (pipe == INVALID_PIPE) 1516 return ICL_CDCLK_CD2X_PIPE_NONE; 1517 else 1518 return ICL_CDCLK_CD2X_PIPE(pipe); 1519 } else { 1520 if (pipe == INVALID_PIPE) 1521 return BXT_CDCLK_CD2X_PIPE_NONE; 1522 else 1523 return BXT_CDCLK_CD2X_PIPE(pipe); 1524 } 1525} 1526 1527static void bxt_set_cdclk(struct drm_i915_private *dev_priv, 1528 const struct intel_cdclk_config *cdclk_config, 1529 enum pipe pipe) 1530{ 1531 int cdclk = cdclk_config->cdclk; 1532 int vco = cdclk_config->vco; 1533 u32 val, divider; 1534 int ret; 1535 1536 /* Inform power controller of upcoming frequency change. */ 1537 if (INTEL_GEN(dev_priv) >= 10) 1538 ret = skl_pcode_request(dev_priv, SKL_PCODE_CDCLK_CONTROL, 1539 SKL_CDCLK_PREPARE_FOR_CHANGE, 1540 SKL_CDCLK_READY_FOR_CHANGE, 1541 SKL_CDCLK_READY_FOR_CHANGE, 3); 1542 else 1543 /* 1544 * BSpec requires us to wait up to 150usec, but that leads to 1545 * timeouts; the 2ms used here is based on experiment. 1546 */ 1547 ret = sandybridge_pcode_write_timeout(dev_priv, 1548 HSW_PCODE_DE_WRITE_FREQ_REQ, 1549 0x80000000, 150, 2); 1550 1551 if (ret) { 1552 drm_err(&dev_priv->drm, 1553 "Failed to inform PCU about cdclk change (err %d, freq %d)\n", 1554 ret, cdclk); 1555 return; 1556 } 1557 1558 /* cdclk = vco / 2 / div{1,1.5,2,4} */ 1559 switch (DIV_ROUND_CLOSEST(vco, cdclk)) { 1560 default: 1561 drm_WARN_ON(&dev_priv->drm, 1562 cdclk != dev_priv->cdclk.hw.bypass); 1563 drm_WARN_ON(&dev_priv->drm, vco != 0); 1564 fallthrough; 1565 case 2: 1566 divider = BXT_CDCLK_CD2X_DIV_SEL_1; 1567 break; 1568 case 3: 1569 drm_WARN(&dev_priv->drm, 1570 IS_GEMINILAKE(dev_priv) || INTEL_GEN(dev_priv) >= 10, 1571 "Unsupported divider\n"); 1572 divider = BXT_CDCLK_CD2X_DIV_SEL_1_5; 1573 break; 1574 case 4: 1575 divider = BXT_CDCLK_CD2X_DIV_SEL_2; 1576 break; 1577 case 8: 1578 drm_WARN(&dev_priv->drm, INTEL_GEN(dev_priv) >= 10, 1579 "Unsupported divider\n"); 1580 divider = BXT_CDCLK_CD2X_DIV_SEL_4; 1581 break; 1582 } 1583 1584 if (INTEL_GEN(dev_priv) >= 10) { 1585 if (dev_priv->cdclk.hw.vco != 0 && 1586 dev_priv->cdclk.hw.vco != vco) 1587 cnl_cdclk_pll_disable(dev_priv); 1588 1589 if (dev_priv->cdclk.hw.vco != vco) 1590 cnl_cdclk_pll_enable(dev_priv, vco); 1591 1592 } else { 1593 if (dev_priv->cdclk.hw.vco != 0 && 1594 dev_priv->cdclk.hw.vco != vco) 1595 bxt_de_pll_disable(dev_priv); 1596 1597 if (dev_priv->cdclk.hw.vco != vco) 1598 bxt_de_pll_enable(dev_priv, vco); 1599 } 1600 1601 val = divider | skl_cdclk_decimal(cdclk) | 1602 bxt_cdclk_cd2x_pipe(dev_priv, pipe); 1603 1604 /* 1605 * Disable SSA Precharge when CD clock frequency < 500 MHz, 1606 * enable otherwise. 1607 */ 1608 if (IS_GEN9_LP(dev_priv) && cdclk >= 500000) 1609 val |= BXT_CDCLK_SSA_PRECHARGE_ENABLE; 1610 intel_de_write(dev_priv, CDCLK_CTL, val); 1611 1612 if (pipe != INVALID_PIPE) 1613 intel_wait_for_vblank(dev_priv, pipe); 1614 1615 if (INTEL_GEN(dev_priv) >= 10) { 1616 ret = sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL, 1617 cdclk_config->voltage_level); 1618 } else { 1619 /* 1620 * The timeout isn't specified, the 2ms used here is based on 1621 * experiment. 1622 * FIXME: Waiting for the request completion could be delayed 1623 * until the next PCODE request based on BSpec. 1624 */ 1625 ret = sandybridge_pcode_write_timeout(dev_priv, 1626 HSW_PCODE_DE_WRITE_FREQ_REQ, 1627 cdclk_config->voltage_level, 1628 150, 2); 1629 } 1630 1631 if (ret) { 1632 drm_err(&dev_priv->drm, 1633 "PCode CDCLK freq set failed, (err %d, freq %d)\n", 1634 ret, cdclk); 1635 return; 1636 } 1637 1638 intel_update_cdclk(dev_priv); 1639 1640 if (INTEL_GEN(dev_priv) >= 10) 1641 /* 1642 * Can't read out the voltage level :( 1643 * Let's just assume everything is as expected. 1644 */ 1645 dev_priv->cdclk.hw.voltage_level = cdclk_config->voltage_level; 1646} 1647 1648static void bxt_sanitize_cdclk(struct drm_i915_private *dev_priv) 1649{ 1650 u32 cdctl, expected; 1651 int cdclk, vco; 1652 1653 intel_update_cdclk(dev_priv); 1654 intel_dump_cdclk_config(&dev_priv->cdclk.hw, "Current CDCLK"); 1655 1656 if (dev_priv->cdclk.hw.vco == 0 || 1657 dev_priv->cdclk.hw.cdclk == dev_priv->cdclk.hw.bypass) 1658 goto sanitize; 1659 1660 /* DPLL okay; verify the cdclock 1661 * 1662 * Some BIOS versions leave an incorrect decimal frequency value and 1663 * set reserved MBZ bits in CDCLK_CTL at least during exiting from S4, 1664 * so sanitize this register. 1665 */ 1666 cdctl = intel_de_read(dev_priv, CDCLK_CTL); 1667 /* 1668 * Let's ignore the pipe field, since BIOS could have configured the 1669 * dividers both synching to an active pipe, or asynchronously 1670 * (PIPE_NONE). 1671 */ 1672 cdctl &= ~bxt_cdclk_cd2x_pipe(dev_priv, INVALID_PIPE); 1673 1674 /* Make sure this is a legal cdclk value for the platform */ 1675 cdclk = bxt_calc_cdclk(dev_priv, dev_priv->cdclk.hw.cdclk); 1676 if (cdclk != dev_priv->cdclk.hw.cdclk) 1677 goto sanitize; 1678 1679 /* Make sure the VCO is correct for the cdclk */ 1680 vco = bxt_calc_cdclk_pll_vco(dev_priv, cdclk); 1681 if (vco != dev_priv->cdclk.hw.vco) 1682 goto sanitize; 1683 1684 expected = skl_cdclk_decimal(cdclk); 1685 1686 /* Figure out what CD2X divider we should be using for this cdclk */ 1687 switch (DIV_ROUND_CLOSEST(dev_priv->cdclk.hw.vco, 1688 dev_priv->cdclk.hw.cdclk)) { 1689 case 2: 1690 expected |= BXT_CDCLK_CD2X_DIV_SEL_1; 1691 break; 1692 case 3: 1693 expected |= BXT_CDCLK_CD2X_DIV_SEL_1_5; 1694 break; 1695 case 4: 1696 expected |= BXT_CDCLK_CD2X_DIV_SEL_2; 1697 break; 1698 case 8: 1699 expected |= BXT_CDCLK_CD2X_DIV_SEL_4; 1700 break; 1701 default: 1702 goto sanitize; 1703 } 1704 1705 /* 1706 * Disable SSA Precharge when CD clock frequency < 500 MHz, 1707 * enable otherwise. 1708 */ 1709 if (IS_GEN9_LP(dev_priv) && dev_priv->cdclk.hw.cdclk >= 500000) 1710 expected |= BXT_CDCLK_SSA_PRECHARGE_ENABLE; 1711 1712 if (cdctl == expected) 1713 /* All well; nothing to sanitize */ 1714 return; 1715 1716sanitize: 1717 drm_dbg_kms(&dev_priv->drm, "Sanitizing cdclk programmed by pre-os\n"); 1718 1719 /* force cdclk programming */ 1720 dev_priv->cdclk.hw.cdclk = 0; 1721 1722 /* force full PLL disable + enable */ 1723 dev_priv->cdclk.hw.vco = -1; 1724} 1725 1726static void bxt_cdclk_init_hw(struct drm_i915_private *dev_priv) 1727{ 1728 struct intel_cdclk_config cdclk_config; 1729 1730 bxt_sanitize_cdclk(dev_priv); 1731 1732 if (dev_priv->cdclk.hw.cdclk != 0 && 1733 dev_priv->cdclk.hw.vco != 0) 1734 return; 1735 1736 cdclk_config = dev_priv->cdclk.hw; 1737 1738 /* 1739 * FIXME: 1740 * - The initial CDCLK needs to be read from VBT. 1741 * Need to make this change after VBT has changes for BXT. 1742 */ 1743 cdclk_config.cdclk = bxt_calc_cdclk(dev_priv, 0); 1744 cdclk_config.vco = bxt_calc_cdclk_pll_vco(dev_priv, cdclk_config.cdclk); 1745 cdclk_config.voltage_level = 1746 dev_priv->display.calc_voltage_level(cdclk_config.cdclk); 1747 1748 bxt_set_cdclk(dev_priv, &cdclk_config, INVALID_PIPE); 1749} 1750 1751static void bxt_cdclk_uninit_hw(struct drm_i915_private *dev_priv) 1752{ 1753 struct intel_cdclk_config cdclk_config = dev_priv->cdclk.hw; 1754 1755 cdclk_config.cdclk = cdclk_config.bypass; 1756 cdclk_config.vco = 0; 1757 cdclk_config.voltage_level = 1758 dev_priv->display.calc_voltage_level(cdclk_config.cdclk); 1759 1760 bxt_set_cdclk(dev_priv, &cdclk_config, INVALID_PIPE); 1761} 1762 1763/** 1764 * intel_cdclk_init_hw - Initialize CDCLK hardware 1765 * @i915: i915 device 1766 * 1767 * Initialize CDCLK. This consists mainly of initializing dev_priv->cdclk.hw and 1768 * sanitizing the state of the hardware if needed. This is generally done only 1769 * during the display core initialization sequence, after which the DMC will 1770 * take care of turning CDCLK off/on as needed. 1771 */ 1772void intel_cdclk_init_hw(struct drm_i915_private *i915) 1773{ 1774 if (IS_GEN9_LP(i915) || INTEL_GEN(i915) >= 10) 1775 bxt_cdclk_init_hw(i915); 1776 else if (IS_GEN9_BC(i915)) 1777 skl_cdclk_init_hw(i915); 1778} 1779 1780/** 1781 * intel_cdclk_uninit_hw - Uninitialize CDCLK hardware 1782 * @i915: i915 device 1783 * 1784 * Uninitialize CDCLK. This is done only during the display core 1785 * uninitialization sequence. 1786 */ 1787void intel_cdclk_uninit_hw(struct drm_i915_private *i915) 1788{ 1789 if (INTEL_GEN(i915) >= 10 || IS_GEN9_LP(i915)) 1790 bxt_cdclk_uninit_hw(i915); 1791 else if (IS_GEN9_BC(i915)) 1792 skl_cdclk_uninit_hw(i915); 1793} 1794 1795/** 1796 * intel_cdclk_needs_modeset - Determine if changong between the CDCLK 1797 * configurations requires a modeset on all pipes 1798 * @a: first CDCLK configuration 1799 * @b: second CDCLK configuration 1800 * 1801 * Returns: 1802 * True if changing between the two CDCLK configurations 1803 * requires all pipes to be off, false if not. 1804 */ 1805bool intel_cdclk_needs_modeset(const struct intel_cdclk_config *a, 1806 const struct intel_cdclk_config *b) 1807{ 1808 return a->cdclk != b->cdclk || 1809 a->vco != b->vco || 1810 a->ref != b->ref; 1811} 1812 1813/** 1814 * intel_cdclk_can_cd2x_update - Determine if changing between the two CDCLK 1815 * configurations requires only a cd2x divider update 1816 * @dev_priv: i915 device 1817 * @a: first CDCLK configuration 1818 * @b: second CDCLK configuration 1819 * 1820 * Returns: 1821 * True if changing between the two CDCLK configurations 1822 * can be done with just a cd2x divider update, false if not. 1823 */ 1824static bool intel_cdclk_can_cd2x_update(struct drm_i915_private *dev_priv, 1825 const struct intel_cdclk_config *a, 1826 const struct intel_cdclk_config *b) 1827{ 1828 /* Older hw doesn't have the capability */ 1829 if (INTEL_GEN(dev_priv) < 10 && !IS_GEN9_LP(dev_priv)) 1830 return false; 1831 1832 return a->cdclk != b->cdclk && 1833 a->vco == b->vco && 1834 a->ref == b->ref; 1835} 1836 1837/** 1838 * intel_cdclk_changed - Determine if two CDCLK configurations are different 1839 * @a: first CDCLK configuration 1840 * @b: second CDCLK configuration 1841 * 1842 * Returns: 1843 * True if the CDCLK configurations don't match, false if they do. 1844 */ 1845static bool intel_cdclk_changed(const struct intel_cdclk_config *a, 1846 const struct intel_cdclk_config *b) 1847{ 1848 return intel_cdclk_needs_modeset(a, b) || 1849 a->voltage_level != b->voltage_level; 1850} 1851 1852void intel_dump_cdclk_config(const struct intel_cdclk_config *cdclk_config, 1853 const char *context) 1854{ 1855 DRM_DEBUG_DRIVER("%s %d kHz, VCO %d kHz, ref %d kHz, bypass %d kHz, voltage level %d\n", 1856 context, cdclk_config->cdclk, cdclk_config->vco, 1857 cdclk_config->ref, cdclk_config->bypass, 1858 cdclk_config->voltage_level); 1859} 1860 1861/** 1862 * intel_set_cdclk - Push the CDCLK configuration to the hardware 1863 * @dev_priv: i915 device 1864 * @cdclk_config: new CDCLK configuration 1865 * @pipe: pipe with which to synchronize the update 1866 * 1867 * Program the hardware based on the passed in CDCLK state, 1868 * if necessary. 1869 */ 1870static void intel_set_cdclk(struct drm_i915_private *dev_priv, 1871 const struct intel_cdclk_config *cdclk_config, 1872 enum pipe pipe) 1873{ 1874 struct intel_encoder *encoder; 1875 1876 if (!intel_cdclk_changed(&dev_priv->cdclk.hw, cdclk_config)) 1877 return; 1878 1879 if (drm_WARN_ON_ONCE(&dev_priv->drm, !dev_priv->display.set_cdclk)) 1880 return; 1881 1882 intel_dump_cdclk_config(cdclk_config, "Changing CDCLK to"); 1883 1884 /* 1885 * Lock aux/gmbus while we change cdclk in case those 1886 * functions use cdclk. Not all platforms/ports do, 1887 * but we'll lock them all for simplicity. 1888 */ 1889 mutex_lock(&dev_priv->gmbus_mutex); 1890 for_each_intel_dp(&dev_priv->drm, encoder) { 1891 struct intel_dp *intel_dp = enc_to_intel_dp(encoder); 1892 1893 mutex_lock_nest_lock(&intel_dp->aux.hw_mutex, 1894 &dev_priv->gmbus_mutex); 1895 } 1896 1897 dev_priv->display.set_cdclk(dev_priv, cdclk_config, pipe); 1898 1899 for_each_intel_dp(&dev_priv->drm, encoder) { 1900 struct intel_dp *intel_dp = enc_to_intel_dp(encoder); 1901 1902 mutex_unlock(&intel_dp->aux.hw_mutex); 1903 } 1904 mutex_unlock(&dev_priv->gmbus_mutex); 1905 1906 if (drm_WARN(&dev_priv->drm, 1907 intel_cdclk_changed(&dev_priv->cdclk.hw, cdclk_config), 1908 "cdclk state doesn't match!\n")) { 1909 intel_dump_cdclk_config(&dev_priv->cdclk.hw, "[hw state]"); 1910 intel_dump_cdclk_config(cdclk_config, "[sw state]"); 1911 } 1912} 1913 1914/** 1915 * intel_set_cdclk_pre_plane_update - Push the CDCLK state to the hardware 1916 * @state: intel atomic state 1917 * 1918 * Program the hardware before updating the HW plane state based on the 1919 * new CDCLK state, if necessary. 1920 */ 1921void 1922intel_set_cdclk_pre_plane_update(struct intel_atomic_state *state) 1923{ 1924 struct drm_i915_private *dev_priv = to_i915(state->base.dev); 1925 const struct intel_cdclk_state *old_cdclk_state = 1926 intel_atomic_get_old_cdclk_state(state); 1927 const struct intel_cdclk_state *new_cdclk_state = 1928 intel_atomic_get_new_cdclk_state(state); 1929 enum pipe pipe = new_cdclk_state->pipe; 1930 1931 if (!intel_cdclk_changed(&old_cdclk_state->actual, 1932 &new_cdclk_state->actual)) 1933 return; 1934 1935 if (pipe == INVALID_PIPE || 1936 old_cdclk_state->actual.cdclk <= new_cdclk_state->actual.cdclk) { 1937 drm_WARN_ON(&dev_priv->drm, !new_cdclk_state->base.changed); 1938 1939 intel_set_cdclk(dev_priv, &new_cdclk_state->actual, pipe); 1940 } 1941} 1942 1943/** 1944 * intel_set_cdclk_post_plane_update - Push the CDCLK state to the hardware 1945 * @state: intel atomic state 1946 * 1947 * Program the hardware after updating the HW plane state based on the 1948 * new CDCLK state, if necessary. 1949 */ 1950void 1951intel_set_cdclk_post_plane_update(struct intel_atomic_state *state) 1952{ 1953 struct drm_i915_private *dev_priv = to_i915(state->base.dev); 1954 const struct intel_cdclk_state *old_cdclk_state = 1955 intel_atomic_get_old_cdclk_state(state); 1956 const struct intel_cdclk_state *new_cdclk_state = 1957 intel_atomic_get_new_cdclk_state(state); 1958 enum pipe pipe = new_cdclk_state->pipe; 1959 1960 if (!intel_cdclk_changed(&old_cdclk_state->actual, 1961 &new_cdclk_state->actual)) 1962 return; 1963 1964 if (pipe != INVALID_PIPE && 1965 old_cdclk_state->actual.cdclk > new_cdclk_state->actual.cdclk) { 1966 drm_WARN_ON(&dev_priv->drm, !new_cdclk_state->base.changed); 1967 1968 intel_set_cdclk(dev_priv, &new_cdclk_state->actual, pipe); 1969 } 1970} 1971 1972static int intel_pixel_rate_to_cdclk(const struct intel_crtc_state *crtc_state) 1973{ 1974 struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev); 1975 int pixel_rate = crtc_state->pixel_rate; 1976 1977 if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) 1978 return DIV_ROUND_UP(pixel_rate, 2); 1979 else if (IS_GEN(dev_priv, 9) || 1980 IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) 1981 return pixel_rate; 1982 else if (IS_CHERRYVIEW(dev_priv)) 1983 return DIV_ROUND_UP(pixel_rate * 100, 95); 1984 else if (crtc_state->double_wide) 1985 return DIV_ROUND_UP(pixel_rate * 100, 90 * 2); 1986 else 1987 return DIV_ROUND_UP(pixel_rate * 100, 90); 1988} 1989 1990static int intel_planes_min_cdclk(const struct intel_crtc_state *crtc_state) 1991{ 1992 struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); 1993 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); 1994 struct intel_plane *plane; 1995 int min_cdclk = 0; 1996 1997 for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, plane) 1998 min_cdclk = max(crtc_state->min_cdclk[plane->id], min_cdclk); 1999 2000 return min_cdclk; 2001} 2002 2003int intel_crtc_compute_min_cdclk(const struct intel_crtc_state *crtc_state) 2004{ 2005 struct drm_i915_private *dev_priv = 2006 to_i915(crtc_state->uapi.crtc->dev); 2007 int min_cdclk; 2008 2009 if (!crtc_state->hw.enable) 2010 return 0; 2011 2012 min_cdclk = intel_pixel_rate_to_cdclk(crtc_state); 2013 2014 /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */ 2015 if (IS_BROADWELL(dev_priv) && hsw_crtc_state_ips_capable(crtc_state)) 2016 min_cdclk = DIV_ROUND_UP(min_cdclk * 100, 95); 2017 2018 /* BSpec says "Do not use DisplayPort with CDCLK less than 432 MHz, 2019 * audio enabled, port width x4, and link rate HBR2 (5.4 GHz), or else 2020 * there may be audio corruption or screen corruption." This cdclk 2021 * restriction for GLK is 316.8 MHz. 2022 */ 2023 if (intel_crtc_has_dp_encoder(crtc_state) && 2024 crtc_state->has_audio && 2025 crtc_state->port_clock >= 540000 && 2026 crtc_state->lane_count == 4) { 2027 if (IS_CANNONLAKE(dev_priv) || IS_GEMINILAKE(dev_priv)) { 2028 /* Display WA #1145: glk,cnl */ 2029 min_cdclk = max(316800, min_cdclk); 2030 } else if (IS_GEN(dev_priv, 9) || IS_BROADWELL(dev_priv)) { 2031 /* Display WA #1144: skl,bxt */ 2032 min_cdclk = max(432000, min_cdclk); 2033 } 2034 } 2035 2036 /* 2037 * According to BSpec, "The CD clock frequency must be at least twice 2038 * the frequency of the Azalia BCLK." and BCLK is 96 MHz by default. 2039 */ 2040 if (crtc_state->has_audio && INTEL_GEN(dev_priv) >= 9) 2041 min_cdclk = max(2 * 96000, min_cdclk); 2042 2043 /* 2044 * "For DP audio configuration, cdclk frequency shall be set to 2045 * meet the following requirements: 2046 * DP Link Frequency(MHz) | Cdclk frequency(MHz) 2047 * 270 | 320 or higher 2048 * 162 | 200 or higher" 2049 */ 2050 if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) && 2051 intel_crtc_has_dp_encoder(crtc_state) && crtc_state->has_audio) 2052 min_cdclk = max(crtc_state->port_clock, min_cdclk); 2053 2054 /* 2055 * On Valleyview some DSI panels lose (v|h)sync when the clock is lower 2056 * than 320000KHz. 2057 */ 2058 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI) && 2059 IS_VALLEYVIEW(dev_priv)) 2060 min_cdclk = max(320000, min_cdclk); 2061 2062 /* 2063 * On Geminilake once the CDCLK gets as low as 79200 2064 * picture gets unstable, despite that values are 2065 * correct for DSI PLL and DE PLL. 2066 */ 2067 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI) && 2068 IS_GEMINILAKE(dev_priv)) 2069 min_cdclk = max(158400, min_cdclk); 2070 2071 /* Account for additional needs from the planes */ 2072 min_cdclk = max(intel_planes_min_cdclk(crtc_state), min_cdclk); 2073 2074 /* 2075 * HACK. Currently for TGL platforms we calculate 2076 * min_cdclk initially based on pixel_rate divided 2077 * by 2, accounting for also plane requirements, 2078 * however in some cases the lowest possible CDCLK 2079 * doesn't work and causing the underruns. 2080 * Explicitly stating here that this seems to be currently 2081 * rather a Hack, than final solution. 2082 */ 2083 if (IS_TIGERLAKE(dev_priv)) { 2084 /* 2085 * Clamp to max_cdclk_freq in case pixel rate is higher, 2086 * in order not to break an 8K, but still leave W/A at place. 2087 */ 2088 min_cdclk = max_t(int, min_cdclk, 2089 min_t(int, crtc_state->pixel_rate, 2090 dev_priv->max_cdclk_freq)); 2091 } 2092 2093 if (min_cdclk > dev_priv->max_cdclk_freq) { 2094 drm_dbg_kms(&dev_priv->drm, 2095 "required cdclk (%d kHz) exceeds max (%d kHz)\n", 2096 min_cdclk, dev_priv->max_cdclk_freq); 2097 return -EINVAL; 2098 } 2099 2100 return min_cdclk; 2101} 2102 2103static int intel_compute_min_cdclk(struct intel_cdclk_state *cdclk_state) 2104{ 2105 struct intel_atomic_state *state = cdclk_state->base.state; 2106 struct drm_i915_private *dev_priv = to_i915(state->base.dev); 2107 struct intel_bw_state *bw_state = NULL; 2108 struct intel_crtc *crtc; 2109 struct intel_crtc_state *crtc_state; 2110 int min_cdclk, i; 2111 enum pipe pipe; 2112 2113 for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) { 2114 int ret; 2115 2116 min_cdclk = intel_crtc_compute_min_cdclk(crtc_state); 2117 if (min_cdclk < 0) 2118 return min_cdclk; 2119 2120 bw_state = intel_atomic_get_bw_state(state); 2121 if (IS_ERR(bw_state)) 2122 return PTR_ERR(bw_state); 2123 2124 if (cdclk_state->min_cdclk[i] == min_cdclk) 2125 continue; 2126 2127 cdclk_state->min_cdclk[i] = min_cdclk; 2128 2129 ret = intel_atomic_lock_global_state(&cdclk_state->base); 2130 if (ret) 2131 return ret; 2132 } 2133 2134 min_cdclk = cdclk_state->force_min_cdclk; 2135 for_each_pipe(dev_priv, pipe) { 2136 min_cdclk = max(cdclk_state->min_cdclk[pipe], min_cdclk); 2137 2138 if (!bw_state) 2139 continue; 2140 2141 min_cdclk = max(bw_state->min_cdclk, min_cdclk); 2142 } 2143 2144 return min_cdclk; 2145} 2146 2147/* 2148 * Account for port clock min voltage level requirements. 2149 * This only really does something on CNL+ but can be 2150 * called on earlier platforms as well. 2151 * 2152 * Note that this functions assumes that 0 is 2153 * the lowest voltage value, and higher values 2154 * correspond to increasingly higher voltages. 2155 * 2156 * Should that relationship no longer hold on 2157 * future platforms this code will need to be 2158 * adjusted. 2159 */ 2160static int bxt_compute_min_voltage_level(struct intel_cdclk_state *cdclk_state) 2161{ 2162 struct intel_atomic_state *state = cdclk_state->base.state; 2163 struct drm_i915_private *dev_priv = to_i915(state->base.dev); 2164 struct intel_crtc *crtc; 2165 struct intel_crtc_state *crtc_state; 2166 u8 min_voltage_level; 2167 int i; 2168 enum pipe pipe; 2169 2170 for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) { 2171 int ret; 2172 2173 if (crtc_state->hw.enable) 2174 min_voltage_level = crtc_state->min_voltage_level; 2175 else 2176 min_voltage_level = 0; 2177 2178 if (cdclk_state->min_voltage_level[i] == min_voltage_level) 2179 continue; 2180 2181 cdclk_state->min_voltage_level[i] = min_voltage_level; 2182 2183 ret = intel_atomic_lock_global_state(&cdclk_state->base); 2184 if (ret) 2185 return ret; 2186 } 2187 2188 min_voltage_level = 0; 2189 for_each_pipe(dev_priv, pipe) 2190 min_voltage_level = max(cdclk_state->min_voltage_level[pipe], 2191 min_voltage_level); 2192 2193 return min_voltage_level; 2194} 2195 2196static int vlv_modeset_calc_cdclk(struct intel_cdclk_state *cdclk_state) 2197{ 2198 struct intel_atomic_state *state = cdclk_state->base.state; 2199 struct drm_i915_private *dev_priv = to_i915(state->base.dev); 2200 int min_cdclk, cdclk; 2201 2202 min_cdclk = intel_compute_min_cdclk(cdclk_state); 2203 if (min_cdclk < 0) 2204 return min_cdclk; 2205 2206 cdclk = vlv_calc_cdclk(dev_priv, min_cdclk); 2207 2208 cdclk_state->logical.cdclk = cdclk; 2209 cdclk_state->logical.voltage_level = 2210 vlv_calc_voltage_level(dev_priv, cdclk); 2211 2212 if (!cdclk_state->active_pipes) { 2213 cdclk = vlv_calc_cdclk(dev_priv, cdclk_state->force_min_cdclk); 2214 2215 cdclk_state->actual.cdclk = cdclk; 2216 cdclk_state->actual.voltage_level = 2217 vlv_calc_voltage_level(dev_priv, cdclk); 2218 } else { 2219 cdclk_state->actual = cdclk_state->logical; 2220 } 2221 2222 return 0; 2223} 2224 2225static int bdw_modeset_calc_cdclk(struct intel_cdclk_state *cdclk_state) 2226{ 2227 int min_cdclk, cdclk; 2228 2229 min_cdclk = intel_compute_min_cdclk(cdclk_state); 2230 if (min_cdclk < 0) 2231 return min_cdclk; 2232 2233 /* 2234 * FIXME should also account for plane ratio 2235 * once 64bpp pixel formats are supported. 2236 */ 2237 cdclk = bdw_calc_cdclk(min_cdclk); 2238 2239 cdclk_state->logical.cdclk = cdclk; 2240 cdclk_state->logical.voltage_level = 2241 bdw_calc_voltage_level(cdclk); 2242 2243 if (!cdclk_state->active_pipes) { 2244 cdclk = bdw_calc_cdclk(cdclk_state->force_min_cdclk); 2245 2246 cdclk_state->actual.cdclk = cdclk; 2247 cdclk_state->actual.voltage_level = 2248 bdw_calc_voltage_level(cdclk); 2249 } else { 2250 cdclk_state->actual = cdclk_state->logical; 2251 } 2252 2253 return 0; 2254} 2255 2256static int skl_dpll0_vco(struct intel_cdclk_state *cdclk_state) 2257{ 2258 struct intel_atomic_state *state = cdclk_state->base.state; 2259 struct drm_i915_private *dev_priv = to_i915(state->base.dev); 2260 struct intel_crtc *crtc; 2261 struct intel_crtc_state *crtc_state; 2262 int vco, i; 2263 2264 vco = cdclk_state->logical.vco; 2265 if (!vco) 2266 vco = dev_priv->skl_preferred_vco_freq; 2267 2268 for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) { 2269 if (!crtc_state->hw.enable) 2270 continue; 2271 2272 if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_EDP)) 2273 continue; 2274 2275 /* 2276 * DPLL0 VCO may need to be adjusted to get the correct 2277 * clock for eDP. This will affect cdclk as well. 2278 */ 2279 switch (crtc_state->port_clock / 2) { 2280 case 108000: 2281 case 216000: 2282 vco = 8640000; 2283 break; 2284 default: 2285 vco = 8100000; 2286 break; 2287 } 2288 } 2289 2290 return vco; 2291} 2292 2293static int skl_modeset_calc_cdclk(struct intel_cdclk_state *cdclk_state) 2294{ 2295 int min_cdclk, cdclk, vco; 2296 2297 min_cdclk = intel_compute_min_cdclk(cdclk_state); 2298 if (min_cdclk < 0) 2299 return min_cdclk; 2300 2301 vco = skl_dpll0_vco(cdclk_state); 2302 2303 /* 2304 * FIXME should also account for plane ratio 2305 * once 64bpp pixel formats are supported. 2306 */ 2307 cdclk = skl_calc_cdclk(min_cdclk, vco); 2308 2309 cdclk_state->logical.vco = vco; 2310 cdclk_state->logical.cdclk = cdclk; 2311 cdclk_state->logical.voltage_level = 2312 skl_calc_voltage_level(cdclk); 2313 2314 if (!cdclk_state->active_pipes) { 2315 cdclk = skl_calc_cdclk(cdclk_state->force_min_cdclk, vco); 2316 2317 cdclk_state->actual.vco = vco; 2318 cdclk_state->actual.cdclk = cdclk; 2319 cdclk_state->actual.voltage_level = 2320 skl_calc_voltage_level(cdclk); 2321 } else { 2322 cdclk_state->actual = cdclk_state->logical; 2323 } 2324 2325 return 0; 2326} 2327 2328static int bxt_modeset_calc_cdclk(struct intel_cdclk_state *cdclk_state) 2329{ 2330 struct intel_atomic_state *state = cdclk_state->base.state; 2331 struct drm_i915_private *dev_priv = to_i915(state->base.dev); 2332 int min_cdclk, min_voltage_level, cdclk, vco; 2333 2334 min_cdclk = intel_compute_min_cdclk(cdclk_state); 2335 if (min_cdclk < 0) 2336 return min_cdclk; 2337 2338 min_voltage_level = bxt_compute_min_voltage_level(cdclk_state); 2339 if (min_voltage_level < 0) 2340 return min_voltage_level; 2341 2342 cdclk = bxt_calc_cdclk(dev_priv, min_cdclk); 2343 vco = bxt_calc_cdclk_pll_vco(dev_priv, cdclk); 2344 2345 cdclk_state->logical.vco = vco; 2346 cdclk_state->logical.cdclk = cdclk; 2347 cdclk_state->logical.voltage_level = 2348 max_t(int, min_voltage_level, 2349 dev_priv->display.calc_voltage_level(cdclk)); 2350 2351 if (!cdclk_state->active_pipes) { 2352 cdclk = bxt_calc_cdclk(dev_priv, cdclk_state->force_min_cdclk); 2353 vco = bxt_calc_cdclk_pll_vco(dev_priv, cdclk); 2354 2355 cdclk_state->actual.vco = vco; 2356 cdclk_state->actual.cdclk = cdclk; 2357 cdclk_state->actual.voltage_level = 2358 dev_priv->display.calc_voltage_level(cdclk); 2359 } else { 2360 cdclk_state->actual = cdclk_state->logical; 2361 } 2362 2363 return 0; 2364} 2365 2366static int intel_modeset_all_pipes(struct intel_atomic_state *state) 2367{ 2368 struct drm_i915_private *dev_priv = to_i915(state->base.dev); 2369 struct intel_crtc *crtc; 2370 2371 /* 2372 * Add all pipes to the state, and force 2373 * a modeset on all the active ones. 2374 */ 2375 for_each_intel_crtc(&dev_priv->drm, crtc) { 2376 struct intel_crtc_state *crtc_state; 2377 int ret; 2378 2379 crtc_state = intel_atomic_get_crtc_state(&state->base, crtc); 2380 if (IS_ERR(crtc_state)) 2381 return PTR_ERR(crtc_state); 2382 2383 if (!crtc_state->hw.active || 2384 drm_atomic_crtc_needs_modeset(&crtc_state->uapi)) 2385 continue; 2386 2387 crtc_state->uapi.mode_changed = true; 2388 2389 ret = drm_atomic_add_affected_connectors(&state->base, 2390 &crtc->base); 2391 if (ret) 2392 return ret; 2393 2394 ret = drm_atomic_add_affected_planes(&state->base, 2395 &crtc->base); 2396 if (ret) 2397 return ret; 2398 2399 crtc_state->update_planes |= crtc_state->active_planes; 2400 } 2401 2402 return 0; 2403} 2404 2405static int fixed_modeset_calc_cdclk(struct intel_cdclk_state *cdclk_state) 2406{ 2407 int min_cdclk; 2408 2409 /* 2410 * We can't change the cdclk frequency, but we still want to 2411 * check that the required minimum frequency doesn't exceed 2412 * the actual cdclk frequency. 2413 */ 2414 min_cdclk = intel_compute_min_cdclk(cdclk_state); 2415 if (min_cdclk < 0) 2416 return min_cdclk; 2417 2418 return 0; 2419} 2420 2421static struct intel_global_state *intel_cdclk_duplicate_state(struct intel_global_obj *obj) 2422{ 2423 struct intel_cdclk_state *cdclk_state; 2424 2425 cdclk_state = kmemdup(obj->state, sizeof(*cdclk_state), GFP_KERNEL); 2426 if (!cdclk_state) 2427 return NULL; 2428 2429 cdclk_state->pipe = INVALID_PIPE; 2430 2431 return &cdclk_state->base; 2432} 2433 2434static void intel_cdclk_destroy_state(struct intel_global_obj *obj, 2435 struct intel_global_state *state) 2436{ 2437 kfree(state); 2438} 2439 2440static const struct intel_global_state_funcs intel_cdclk_funcs = { 2441 .atomic_duplicate_state = intel_cdclk_duplicate_state, 2442 .atomic_destroy_state = intel_cdclk_destroy_state, 2443}; 2444 2445struct intel_cdclk_state * 2446intel_atomic_get_cdclk_state(struct intel_atomic_state *state) 2447{ 2448 struct drm_i915_private *dev_priv = to_i915(state->base.dev); 2449 struct intel_global_state *cdclk_state; 2450 2451 cdclk_state = intel_atomic_get_global_obj_state(state, &dev_priv->cdclk.obj); 2452 if (IS_ERR(cdclk_state)) 2453 return ERR_CAST(cdclk_state); 2454 2455 return to_intel_cdclk_state(cdclk_state); 2456} 2457 2458int intel_cdclk_init(struct drm_i915_private *dev_priv) 2459{ 2460 struct intel_cdclk_state *cdclk_state; 2461 2462 cdclk_state = kzalloc(sizeof(*cdclk_state), GFP_KERNEL); 2463 if (!cdclk_state) 2464 return -ENOMEM; 2465 2466 intel_atomic_global_obj_init(dev_priv, &dev_priv->cdclk.obj, 2467 &cdclk_state->base, &intel_cdclk_funcs); 2468 2469 return 0; 2470} 2471 2472int intel_modeset_calc_cdclk(struct intel_atomic_state *state) 2473{ 2474 struct drm_i915_private *dev_priv = to_i915(state->base.dev); 2475 const struct intel_cdclk_state *old_cdclk_state; 2476 struct intel_cdclk_state *new_cdclk_state; 2477 enum pipe pipe; 2478 int ret; 2479 2480 new_cdclk_state = intel_atomic_get_cdclk_state(state); 2481 if (IS_ERR(new_cdclk_state)) 2482 return PTR_ERR(new_cdclk_state); 2483 2484 old_cdclk_state = intel_atomic_get_old_cdclk_state(state); 2485 2486 new_cdclk_state->active_pipes = 2487 intel_calc_active_pipes(state, old_cdclk_state->active_pipes); 2488 2489 ret = dev_priv->display.modeset_calc_cdclk(new_cdclk_state); 2490 if (ret) 2491 return ret; 2492 2493 if (intel_cdclk_changed(&old_cdclk_state->actual, 2494 &new_cdclk_state->actual)) { 2495 /* 2496 * Also serialize commits across all crtcs 2497 * if the actual hw needs to be poked. 2498 */ 2499 ret = intel_atomic_serialize_global_state(&new_cdclk_state->base); 2500 if (ret) 2501 return ret; 2502 } else if (old_cdclk_state->active_pipes != new_cdclk_state->active_pipes || 2503 old_cdclk_state->force_min_cdclk != new_cdclk_state->force_min_cdclk || 2504 intel_cdclk_changed(&old_cdclk_state->logical, 2505 &new_cdclk_state->logical)) { 2506 ret = intel_atomic_lock_global_state(&new_cdclk_state->base); 2507 if (ret) 2508 return ret; 2509 } else { 2510 return 0; 2511 } 2512 2513 if (is_power_of_2(new_cdclk_state->active_pipes) && 2514 intel_cdclk_can_cd2x_update(dev_priv, 2515 &old_cdclk_state->actual, 2516 &new_cdclk_state->actual)) { 2517 struct intel_crtc *crtc; 2518 struct intel_crtc_state *crtc_state; 2519 2520 pipe = ilog2(new_cdclk_state->active_pipes); 2521 crtc = intel_get_crtc_for_pipe(dev_priv, pipe); 2522 2523 crtc_state = intel_atomic_get_crtc_state(&state->base, crtc); 2524 if (IS_ERR(crtc_state)) 2525 return PTR_ERR(crtc_state); 2526 2527 if (drm_atomic_crtc_needs_modeset(&crtc_state->uapi)) 2528 pipe = INVALID_PIPE; 2529 } else { 2530 pipe = INVALID_PIPE; 2531 } 2532 2533 if (pipe != INVALID_PIPE) { 2534 new_cdclk_state->pipe = pipe; 2535 2536 drm_dbg_kms(&dev_priv->drm, 2537 "Can change cdclk with pipe %c active\n", 2538 pipe_name(pipe)); 2539 } else if (intel_cdclk_needs_modeset(&old_cdclk_state->actual, 2540 &new_cdclk_state->actual)) { 2541 /* All pipes must be switched off while we change the cdclk. */ 2542 ret = intel_modeset_all_pipes(state); 2543 if (ret) 2544 return ret; 2545 2546 new_cdclk_state->pipe = INVALID_PIPE; 2547 2548 drm_dbg_kms(&dev_priv->drm, 2549 "Modeset required for cdclk change\n"); 2550 } 2551 2552 drm_dbg_kms(&dev_priv->drm, 2553 "New cdclk calculated to be logical %u kHz, actual %u kHz\n", 2554 new_cdclk_state->logical.cdclk, 2555 new_cdclk_state->actual.cdclk); 2556 drm_dbg_kms(&dev_priv->drm, 2557 "New voltage level calculated to be logical %u, actual %u\n", 2558 new_cdclk_state->logical.voltage_level, 2559 new_cdclk_state->actual.voltage_level); 2560 2561 return 0; 2562} 2563 2564static int intel_compute_max_dotclk(struct drm_i915_private *dev_priv) 2565{ 2566 int max_cdclk_freq = dev_priv->max_cdclk_freq; 2567 2568 if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) 2569 return 2 * max_cdclk_freq; 2570 else if (IS_GEN(dev_priv, 9) || 2571 IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) 2572 return max_cdclk_freq; 2573 else if (IS_CHERRYVIEW(dev_priv)) 2574 return max_cdclk_freq*95/100; 2575 else if (INTEL_GEN(dev_priv) < 4) 2576 return 2*max_cdclk_freq*90/100; 2577 else 2578 return max_cdclk_freq*90/100; 2579} 2580 2581/** 2582 * intel_update_max_cdclk - Determine the maximum support CDCLK frequency 2583 * @dev_priv: i915 device 2584 * 2585 * Determine the maximum CDCLK frequency the platform supports, and also 2586 * derive the maximum dot clock frequency the maximum CDCLK frequency 2587 * allows. 2588 */ 2589void intel_update_max_cdclk(struct drm_i915_private *dev_priv) 2590{ 2591 if (IS_ELKHARTLAKE(dev_priv)) { 2592 if (dev_priv->cdclk.hw.ref == 24000) 2593 dev_priv->max_cdclk_freq = 552000; 2594 else 2595 dev_priv->max_cdclk_freq = 556800; 2596 } else if (INTEL_GEN(dev_priv) >= 11) { 2597 if (dev_priv->cdclk.hw.ref == 24000) 2598 dev_priv->max_cdclk_freq = 648000; 2599 else 2600 dev_priv->max_cdclk_freq = 652800; 2601 } else if (IS_CANNONLAKE(dev_priv)) { 2602 dev_priv->max_cdclk_freq = 528000; 2603 } else if (IS_GEN9_BC(dev_priv)) { 2604 u32 limit = intel_de_read(dev_priv, SKL_DFSM) & SKL_DFSM_CDCLK_LIMIT_MASK; 2605 int max_cdclk, vco; 2606 2607 vco = dev_priv->skl_preferred_vco_freq; 2608 drm_WARN_ON(&dev_priv->drm, vco != 8100000 && vco != 8640000); 2609 2610 /* 2611 * Use the lower (vco 8640) cdclk values as a 2612 * first guess. skl_calc_cdclk() will correct it 2613 * if the preferred vco is 8100 instead. 2614 */ 2615 if (limit == SKL_DFSM_CDCLK_LIMIT_675) 2616 max_cdclk = 617143; 2617 else if (limit == SKL_DFSM_CDCLK_LIMIT_540) 2618 max_cdclk = 540000; 2619 else if (limit == SKL_DFSM_CDCLK_LIMIT_450) 2620 max_cdclk = 432000; 2621 else 2622 max_cdclk = 308571; 2623 2624 dev_priv->max_cdclk_freq = skl_calc_cdclk(max_cdclk, vco); 2625 } else if (IS_GEMINILAKE(dev_priv)) { 2626 dev_priv->max_cdclk_freq = 316800; 2627 } else if (IS_BROXTON(dev_priv)) { 2628 dev_priv->max_cdclk_freq = 624000; 2629 } else if (IS_BROADWELL(dev_priv)) { 2630 /* 2631 * FIXME with extra cooling we can allow 2632 * 540 MHz for ULX and 675 Mhz for ULT. 2633 * How can we know if extra cooling is 2634 * available? PCI ID, VTB, something else? 2635 */ 2636 if (intel_de_read(dev_priv, FUSE_STRAP) & HSW_CDCLK_LIMIT) 2637 dev_priv->max_cdclk_freq = 450000; 2638 else if (IS_BDW_ULX(dev_priv)) 2639 dev_priv->max_cdclk_freq = 450000; 2640 else if (IS_BDW_ULT(dev_priv)) 2641 dev_priv->max_cdclk_freq = 540000; 2642 else 2643 dev_priv->max_cdclk_freq = 675000; 2644 } else if (IS_CHERRYVIEW(dev_priv)) { 2645 dev_priv->max_cdclk_freq = 320000; 2646 } else if (IS_VALLEYVIEW(dev_priv)) { 2647 dev_priv->max_cdclk_freq = 400000; 2648 } else { 2649 /* otherwise assume cdclk is fixed */ 2650 dev_priv->max_cdclk_freq = dev_priv->cdclk.hw.cdclk; 2651 } 2652 2653 dev_priv->max_dotclk_freq = intel_compute_max_dotclk(dev_priv); 2654 2655 drm_dbg(&dev_priv->drm, "Max CD clock rate: %d kHz\n", 2656 dev_priv->max_cdclk_freq); 2657 2658 drm_dbg(&dev_priv->drm, "Max dotclock rate: %d kHz\n", 2659 dev_priv->max_dotclk_freq); 2660} 2661 2662/** 2663 * intel_update_cdclk - Determine the current CDCLK frequency 2664 * @dev_priv: i915 device 2665 * 2666 * Determine the current CDCLK frequency. 2667 */ 2668void intel_update_cdclk(struct drm_i915_private *dev_priv) 2669{ 2670 dev_priv->display.get_cdclk(dev_priv, &dev_priv->cdclk.hw); 2671 2672 /* 2673 * 9:0 CMBUS [sic] CDCLK frequency (cdfreq): 2674 * Programmng [sic] note: bit[9:2] should be programmed to the number 2675 * of cdclk that generates 4MHz reference clock freq which is used to 2676 * generate GMBus clock. This will vary with the cdclk freq. 2677 */ 2678 if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) 2679 intel_de_write(dev_priv, GMBUSFREQ_VLV, 2680 DIV_ROUND_UP(dev_priv->cdclk.hw.cdclk, 1000)); 2681} 2682 2683static int cnp_rawclk(struct drm_i915_private *dev_priv) 2684{ 2685 u32 rawclk; 2686 int divider, fraction; 2687 2688 if (intel_de_read(dev_priv, SFUSE_STRAP) & SFUSE_STRAP_RAW_FREQUENCY) { 2689 /* 24 MHz */ 2690 divider = 24000; 2691 fraction = 0; 2692 } else { 2693 /* 19.2 MHz */ 2694 divider = 19000; 2695 fraction = 200; 2696 } 2697 2698 rawclk = CNP_RAWCLK_DIV(divider / 1000); 2699 if (fraction) { 2700 int numerator = 1; 2701 2702 rawclk |= CNP_RAWCLK_DEN(DIV_ROUND_CLOSEST(numerator * 1000, 2703 fraction) - 1); 2704 if (INTEL_PCH_TYPE(dev_priv) >= PCH_ICP) 2705 rawclk |= ICP_RAWCLK_NUM(numerator); 2706 } 2707 2708 intel_de_write(dev_priv, PCH_RAWCLK_FREQ, rawclk); 2709 return divider + fraction; 2710} 2711 2712static int pch_rawclk(struct drm_i915_private *dev_priv) 2713{ 2714 return (intel_de_read(dev_priv, PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK) * 1000; 2715} 2716 2717static int vlv_hrawclk(struct drm_i915_private *dev_priv) 2718{ 2719 /* RAWCLK_FREQ_VLV register updated from power well code */ 2720 return vlv_get_cck_clock_hpll(dev_priv, "hrawclk", 2721 CCK_DISPLAY_REF_CLOCK_CONTROL); 2722} 2723 2724static int i9xx_hrawclk(struct drm_i915_private *dev_priv) 2725{ 2726 u32 clkcfg; 2727 2728 /* 2729 * hrawclock is 1/4 the FSB frequency 2730 * 2731 * Note that this only reads the state of the FSB 2732 * straps, not the actual FSB frequency. Some BIOSen 2733 * let you configure each independently. Ideally we'd 2734 * read out the actual FSB frequency but sadly we 2735 * don't know which registers have that information, 2736 * and all the relevant docs have gone to bit heaven :( 2737 */ 2738 clkcfg = intel_de_read(dev_priv, CLKCFG) & CLKCFG_FSB_MASK; 2739 2740 if (IS_MOBILE(dev_priv)) { 2741 switch (clkcfg) { 2742 case CLKCFG_FSB_400: 2743 return 100000; 2744 case CLKCFG_FSB_533: 2745 return 133333; 2746 case CLKCFG_FSB_667: 2747 return 166667; 2748 case CLKCFG_FSB_800: 2749 return 200000; 2750 case CLKCFG_FSB_1067: 2751 return 266667; 2752 case CLKCFG_FSB_1333: 2753 return 333333; 2754 default: 2755 MISSING_CASE(clkcfg); 2756 return 133333; 2757 } 2758 } else { 2759 switch (clkcfg) { 2760 case CLKCFG_FSB_400_ALT: 2761 return 100000; 2762 case CLKCFG_FSB_533: 2763 return 133333; 2764 case CLKCFG_FSB_667: 2765 return 166667; 2766 case CLKCFG_FSB_800: 2767 return 200000; 2768 case CLKCFG_FSB_1067_ALT: 2769 return 266667; 2770 case CLKCFG_FSB_1333_ALT: 2771 return 333333; 2772 case CLKCFG_FSB_1600_ALT: 2773 return 400000; 2774 default: 2775 return 133333; 2776 } 2777 } 2778} 2779 2780/** 2781 * intel_read_rawclk - Determine the current RAWCLK frequency 2782 * @dev_priv: i915 device 2783 * 2784 * Determine the current RAWCLK frequency. RAWCLK is a fixed 2785 * frequency clock so this needs to done only once. 2786 */ 2787u32 intel_read_rawclk(struct drm_i915_private *dev_priv) 2788{ 2789 u32 freq; 2790 2791 if (INTEL_PCH_TYPE(dev_priv) >= PCH_CNP) 2792 freq = cnp_rawclk(dev_priv); 2793 else if (HAS_PCH_SPLIT(dev_priv)) 2794 freq = pch_rawclk(dev_priv); 2795 else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) 2796 freq = vlv_hrawclk(dev_priv); 2797 else if (INTEL_GEN(dev_priv) >= 3) 2798 freq = i9xx_hrawclk(dev_priv); 2799 else 2800 /* no rawclk on other platforms, or no need to know it */ 2801 return 0; 2802 2803 return freq; 2804} 2805 2806/** 2807 * intel_init_cdclk_hooks - Initialize CDCLK related modesetting hooks 2808 * @dev_priv: i915 device 2809 */ 2810void intel_init_cdclk_hooks(struct drm_i915_private *dev_priv) 2811{ 2812 if (INTEL_GEN(dev_priv) >= 12) { 2813 dev_priv->display.set_cdclk = bxt_set_cdclk; 2814 dev_priv->display.bw_calc_min_cdclk = skl_bw_calc_min_cdclk; 2815 dev_priv->display.modeset_calc_cdclk = bxt_modeset_calc_cdclk; 2816 dev_priv->display.calc_voltage_level = tgl_calc_voltage_level; 2817 dev_priv->cdclk.table = icl_cdclk_table; 2818 } else if (IS_ELKHARTLAKE(dev_priv)) { 2819 dev_priv->display.set_cdclk = bxt_set_cdclk; 2820 dev_priv->display.bw_calc_min_cdclk = skl_bw_calc_min_cdclk; 2821 dev_priv->display.modeset_calc_cdclk = bxt_modeset_calc_cdclk; 2822 dev_priv->display.calc_voltage_level = ehl_calc_voltage_level; 2823 dev_priv->cdclk.table = icl_cdclk_table; 2824 } else if (INTEL_GEN(dev_priv) >= 11) { 2825 dev_priv->display.set_cdclk = bxt_set_cdclk; 2826 dev_priv->display.bw_calc_min_cdclk = skl_bw_calc_min_cdclk; 2827 dev_priv->display.modeset_calc_cdclk = bxt_modeset_calc_cdclk; 2828 dev_priv->display.calc_voltage_level = icl_calc_voltage_level; 2829 dev_priv->cdclk.table = icl_cdclk_table; 2830 } else if (IS_CANNONLAKE(dev_priv)) { 2831 dev_priv->display.bw_calc_min_cdclk = skl_bw_calc_min_cdclk; 2832 dev_priv->display.set_cdclk = bxt_set_cdclk; 2833 dev_priv->display.modeset_calc_cdclk = bxt_modeset_calc_cdclk; 2834 dev_priv->display.calc_voltage_level = cnl_calc_voltage_level; 2835 dev_priv->cdclk.table = cnl_cdclk_table; 2836 } else if (IS_GEN9_LP(dev_priv)) { 2837 dev_priv->display.bw_calc_min_cdclk = skl_bw_calc_min_cdclk; 2838 dev_priv->display.set_cdclk = bxt_set_cdclk; 2839 dev_priv->display.modeset_calc_cdclk = bxt_modeset_calc_cdclk; 2840 dev_priv->display.calc_voltage_level = bxt_calc_voltage_level; 2841 if (IS_GEMINILAKE(dev_priv)) 2842 dev_priv->cdclk.table = glk_cdclk_table; 2843 else 2844 dev_priv->cdclk.table = bxt_cdclk_table; 2845 } else if (IS_GEN9_BC(dev_priv)) { 2846 dev_priv->display.bw_calc_min_cdclk = skl_bw_calc_min_cdclk; 2847 dev_priv->display.set_cdclk = skl_set_cdclk; 2848 dev_priv->display.modeset_calc_cdclk = skl_modeset_calc_cdclk; 2849 } else if (IS_BROADWELL(dev_priv)) { 2850 dev_priv->display.bw_calc_min_cdclk = intel_bw_calc_min_cdclk; 2851 dev_priv->display.set_cdclk = bdw_set_cdclk; 2852 dev_priv->display.modeset_calc_cdclk = bdw_modeset_calc_cdclk; 2853 } else if (IS_CHERRYVIEW(dev_priv)) { 2854 dev_priv->display.bw_calc_min_cdclk = intel_bw_calc_min_cdclk; 2855 dev_priv->display.set_cdclk = chv_set_cdclk; 2856 dev_priv->display.modeset_calc_cdclk = vlv_modeset_calc_cdclk; 2857 } else if (IS_VALLEYVIEW(dev_priv)) { 2858 dev_priv->display.bw_calc_min_cdclk = intel_bw_calc_min_cdclk; 2859 dev_priv->display.set_cdclk = vlv_set_cdclk; 2860 dev_priv->display.modeset_calc_cdclk = vlv_modeset_calc_cdclk; 2861 } else { 2862 dev_priv->display.bw_calc_min_cdclk = intel_bw_calc_min_cdclk; 2863 dev_priv->display.modeset_calc_cdclk = fixed_modeset_calc_cdclk; 2864 } 2865 2866 if (INTEL_GEN(dev_priv) >= 10 || IS_GEN9_LP(dev_priv)) 2867 dev_priv->display.get_cdclk = bxt_get_cdclk; 2868 else if (IS_GEN9_BC(dev_priv)) 2869 dev_priv->display.get_cdclk = skl_get_cdclk; 2870 else if (IS_BROADWELL(dev_priv)) 2871 dev_priv->display.get_cdclk = bdw_get_cdclk; 2872 else if (IS_HASWELL(dev_priv)) 2873 dev_priv->display.get_cdclk = hsw_get_cdclk; 2874 else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) 2875 dev_priv->display.get_cdclk = vlv_get_cdclk; 2876 else if (IS_GEN(dev_priv, 6) || IS_IVYBRIDGE(dev_priv)) 2877 dev_priv->display.get_cdclk = fixed_400mhz_get_cdclk; 2878 else if (IS_GEN(dev_priv, 5)) 2879 dev_priv->display.get_cdclk = fixed_450mhz_get_cdclk; 2880 else if (IS_GM45(dev_priv)) 2881 dev_priv->display.get_cdclk = gm45_get_cdclk; 2882 else if (IS_G45(dev_priv)) 2883 dev_priv->display.get_cdclk = g33_get_cdclk; 2884 else if (IS_I965GM(dev_priv)) 2885 dev_priv->display.get_cdclk = i965gm_get_cdclk; 2886 else if (IS_I965G(dev_priv)) 2887 dev_priv->display.get_cdclk = fixed_400mhz_get_cdclk; 2888 else if (IS_PINEVIEW(dev_priv)) 2889 dev_priv->display.get_cdclk = pnv_get_cdclk; 2890 else if (IS_G33(dev_priv)) 2891 dev_priv->display.get_cdclk = g33_get_cdclk; 2892 else if (IS_I945GM(dev_priv)) 2893 dev_priv->display.get_cdclk = i945gm_get_cdclk; 2894 else if (IS_I945G(dev_priv)) 2895 dev_priv->display.get_cdclk = fixed_400mhz_get_cdclk; 2896 else if (IS_I915GM(dev_priv)) 2897 dev_priv->display.get_cdclk = i915gm_get_cdclk; 2898 else if (IS_I915G(dev_priv)) 2899 dev_priv->display.get_cdclk = fixed_333mhz_get_cdclk; 2900 else if (IS_I865G(dev_priv)) 2901 dev_priv->display.get_cdclk = fixed_266mhz_get_cdclk; 2902 else if (IS_I85X(dev_priv)) 2903 dev_priv->display.get_cdclk = i85x_get_cdclk; 2904 else if (IS_I845G(dev_priv)) 2905 dev_priv->display.get_cdclk = fixed_200mhz_get_cdclk; 2906 else if (IS_I830(dev_priv)) 2907 dev_priv->display.get_cdclk = fixed_133mhz_get_cdclk; 2908 2909 if (drm_WARN(&dev_priv->drm, !dev_priv->display.get_cdclk, 2910 "Unknown platform. Assuming 133 MHz CDCLK\n")) 2911 dev_priv->display.get_cdclk = fixed_133mhz_get_cdclk; 2912} 2913