1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * PCI driver for the High Speed UART DMA 4 * 5 * Copyright (C) 2015 Intel Corporation 6 * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com> 7 * 8 * Partially based on the bits found in drivers/tty/serial/mfd.c. 9 */ 10 11#include <linux/bitops.h> 12#include <linux/device.h> 13#include <linux/module.h> 14#include <linux/pci.h> 15 16#include "hsu.h" 17 18#define HSU_PCI_DMASR 0x00 19#define HSU_PCI_DMAISR 0x04 20 21#define HSU_PCI_CHAN_OFFSET 0x100 22 23#define PCI_DEVICE_ID_INTEL_MFLD_HSU_DMA 0x081e 24#define PCI_DEVICE_ID_INTEL_MRFLD_HSU_DMA 0x1192 25 26static irqreturn_t hsu_pci_irq(int irq, void *dev) 27{ 28 struct hsu_dma_chip *chip = dev; 29 u32 dmaisr; 30 u32 status; 31 unsigned short i; 32 int ret = 0; 33 int err; 34 35 dmaisr = readl(chip->regs + HSU_PCI_DMAISR); 36 for (i = 0; i < chip->hsu->nr_channels; i++) { 37 if (dmaisr & 0x1) { 38 err = hsu_dma_get_status(chip, i, &status); 39 if (err > 0) 40 ret |= 1; 41 else if (err == 0) 42 ret |= hsu_dma_do_irq(chip, i, status); 43 } 44 dmaisr >>= 1; 45 } 46 47 return IRQ_RETVAL(ret); 48} 49 50static int hsu_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) 51{ 52 struct hsu_dma_chip *chip; 53 int ret; 54 55 ret = pcim_enable_device(pdev); 56 if (ret) 57 return ret; 58 59 ret = pcim_iomap_regions(pdev, BIT(0), pci_name(pdev)); 60 if (ret) { 61 dev_err(&pdev->dev, "I/O memory remapping failed\n"); 62 return ret; 63 } 64 65 pci_set_master(pdev); 66 pci_try_set_mwi(pdev); 67 68 ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); 69 if (ret) 70 return ret; 71 72 ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); 73 if (ret) 74 return ret; 75 76 chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL); 77 if (!chip) 78 return -ENOMEM; 79 80 ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES); 81 if (ret < 0) 82 return ret; 83 84 chip->dev = &pdev->dev; 85 chip->regs = pcim_iomap_table(pdev)[0]; 86 chip->length = pci_resource_len(pdev, 0); 87 chip->offset = HSU_PCI_CHAN_OFFSET; 88 chip->irq = pci_irq_vector(pdev, 0); 89 90 ret = hsu_dma_probe(chip); 91 if (ret) 92 return ret; 93 94 ret = request_irq(chip->irq, hsu_pci_irq, 0, "hsu_dma_pci", chip); 95 if (ret) 96 goto err_register_irq; 97 98 /* 99 * On Intel Tangier B0 and Anniedale the interrupt line, disregarding 100 * to have different numbers, is shared between HSU DMA and UART IPs. 101 * Thus on such SoCs we are expecting that IRQ handler is called in 102 * UART driver only. Instead of handling the spurious interrupt 103 * from HSU DMA here and waste CPU time and delay HSU UART interrupt 104 * handling, disable the interrupt entirely. 105 */ 106 if (pdev->device == PCI_DEVICE_ID_INTEL_MRFLD_HSU_DMA) 107 disable_irq_nosync(chip->irq); 108 109 pci_set_drvdata(pdev, chip); 110 111 return 0; 112 113err_register_irq: 114 hsu_dma_remove(chip); 115 return ret; 116} 117 118static void hsu_pci_remove(struct pci_dev *pdev) 119{ 120 struct hsu_dma_chip *chip = pci_get_drvdata(pdev); 121 122 free_irq(chip->irq, chip); 123 hsu_dma_remove(chip); 124} 125 126static const struct pci_device_id hsu_pci_id_table[] = { 127 { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MFLD_HSU_DMA), 0 }, 128 { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MRFLD_HSU_DMA), 0 }, 129 { } 130}; 131MODULE_DEVICE_TABLE(pci, hsu_pci_id_table); 132 133static struct pci_driver hsu_pci_driver = { 134 .name = "hsu_dma_pci", 135 .id_table = hsu_pci_id_table, 136 .probe = hsu_pci_probe, 137 .remove = hsu_pci_remove, 138}; 139 140module_pci_driver(hsu_pci_driver); 141 142MODULE_LICENSE("GPL v2"); 143MODULE_DESCRIPTION("High Speed UART DMA PCI driver"); 144MODULE_AUTHOR("Andy Shevchenko <andriy.shevchenko@linux.intel.com>"); 145