1// SPDX-License-Identifier: GPL-2.0+ 2/* 3 * Copyright (c) 2015-2016, IBM Corporation. 4 */ 5 6#include <linux/atomic.h> 7#include <linux/bt-bmc.h> 8#include <linux/errno.h> 9#include <linux/interrupt.h> 10#include <linux/io.h> 11#include <linux/mfd/syscon.h> 12#include <linux/miscdevice.h> 13#include <linux/module.h> 14#include <linux/of.h> 15#include <linux/platform_device.h> 16#include <linux/poll.h> 17#include <linux/regmap.h> 18#include <linux/sched.h> 19#include <linux/timer.h> 20 21/* 22 * This is a BMC device used to communicate to the host 23 */ 24#define DEVICE_NAME "ipmi-bt-host" 25 26#define BT_IO_BASE 0xe4 27#define BT_IRQ 10 28 29#define BT_CR0 0x0 30#define BT_CR0_IO_BASE 16 31#define BT_CR0_IRQ 12 32#define BT_CR0_EN_CLR_SLV_RDP 0x8 33#define BT_CR0_EN_CLR_SLV_WRP 0x4 34#define BT_CR0_ENABLE_IBT 0x1 35#define BT_CR1 0x4 36#define BT_CR1_IRQ_H2B 0x01 37#define BT_CR1_IRQ_HBUSY 0x40 38#define BT_CR2 0x8 39#define BT_CR2_IRQ_H2B 0x01 40#define BT_CR2_IRQ_HBUSY 0x40 41#define BT_CR3 0xc 42#define BT_CTRL 0x10 43#define BT_CTRL_B_BUSY 0x80 44#define BT_CTRL_H_BUSY 0x40 45#define BT_CTRL_OEM0 0x20 46#define BT_CTRL_SMS_ATN 0x10 47#define BT_CTRL_B2H_ATN 0x08 48#define BT_CTRL_H2B_ATN 0x04 49#define BT_CTRL_CLR_RD_PTR 0x02 50#define BT_CTRL_CLR_WR_PTR 0x01 51#define BT_BMC2HOST 0x14 52#define BT_INTMASK 0x18 53#define BT_INTMASK_B2H_IRQEN 0x01 54#define BT_INTMASK_B2H_IRQ 0x02 55#define BT_INTMASK_BMC_HWRST 0x80 56 57#define BT_BMC_BUFFER_SIZE 256 58 59struct bt_bmc { 60 struct device dev; 61 struct miscdevice miscdev; 62 struct regmap *map; 63 int offset; 64 int irq; 65 wait_queue_head_t queue; 66 struct timer_list poll_timer; 67 struct mutex mutex; 68}; 69 70static atomic_t open_count = ATOMIC_INIT(0); 71 72static const struct regmap_config bt_regmap_cfg = { 73 .reg_bits = 32, 74 .val_bits = 32, 75 .reg_stride = 4, 76}; 77 78static u8 bt_inb(struct bt_bmc *bt_bmc, int reg) 79{ 80 uint32_t val = 0; 81 int rc; 82 83 rc = regmap_read(bt_bmc->map, bt_bmc->offset + reg, &val); 84 WARN(rc != 0, "regmap_read() failed: %d\n", rc); 85 86 return rc == 0 ? (u8) val : 0; 87} 88 89static void bt_outb(struct bt_bmc *bt_bmc, u8 data, int reg) 90{ 91 int rc; 92 93 rc = regmap_write(bt_bmc->map, bt_bmc->offset + reg, data); 94 WARN(rc != 0, "regmap_write() failed: %d\n", rc); 95} 96 97static void clr_rd_ptr(struct bt_bmc *bt_bmc) 98{ 99 bt_outb(bt_bmc, BT_CTRL_CLR_RD_PTR, BT_CTRL); 100} 101 102static void clr_wr_ptr(struct bt_bmc *bt_bmc) 103{ 104 bt_outb(bt_bmc, BT_CTRL_CLR_WR_PTR, BT_CTRL); 105} 106 107static void clr_h2b_atn(struct bt_bmc *bt_bmc) 108{ 109 bt_outb(bt_bmc, BT_CTRL_H2B_ATN, BT_CTRL); 110} 111 112static void set_b_busy(struct bt_bmc *bt_bmc) 113{ 114 if (!(bt_inb(bt_bmc, BT_CTRL) & BT_CTRL_B_BUSY)) 115 bt_outb(bt_bmc, BT_CTRL_B_BUSY, BT_CTRL); 116} 117 118static void clr_b_busy(struct bt_bmc *bt_bmc) 119{ 120 if (bt_inb(bt_bmc, BT_CTRL) & BT_CTRL_B_BUSY) 121 bt_outb(bt_bmc, BT_CTRL_B_BUSY, BT_CTRL); 122} 123 124static void set_b2h_atn(struct bt_bmc *bt_bmc) 125{ 126 bt_outb(bt_bmc, BT_CTRL_B2H_ATN, BT_CTRL); 127} 128 129static u8 bt_read(struct bt_bmc *bt_bmc) 130{ 131 return bt_inb(bt_bmc, BT_BMC2HOST); 132} 133 134static ssize_t bt_readn(struct bt_bmc *bt_bmc, u8 *buf, size_t n) 135{ 136 int i; 137 138 for (i = 0; i < n; i++) 139 buf[i] = bt_read(bt_bmc); 140 return n; 141} 142 143static void bt_write(struct bt_bmc *bt_bmc, u8 c) 144{ 145 bt_outb(bt_bmc, c, BT_BMC2HOST); 146} 147 148static ssize_t bt_writen(struct bt_bmc *bt_bmc, u8 *buf, size_t n) 149{ 150 int i; 151 152 for (i = 0; i < n; i++) 153 bt_write(bt_bmc, buf[i]); 154 return n; 155} 156 157static void set_sms_atn(struct bt_bmc *bt_bmc) 158{ 159 bt_outb(bt_bmc, BT_CTRL_SMS_ATN, BT_CTRL); 160} 161 162static struct bt_bmc *file_bt_bmc(struct file *file) 163{ 164 return container_of(file->private_data, struct bt_bmc, miscdev); 165} 166 167static int bt_bmc_open(struct inode *inode, struct file *file) 168{ 169 struct bt_bmc *bt_bmc = file_bt_bmc(file); 170 171 if (atomic_inc_return(&open_count) == 1) { 172 clr_b_busy(bt_bmc); 173 return 0; 174 } 175 176 atomic_dec(&open_count); 177 return -EBUSY; 178} 179 180/* 181 * The BT (Block Transfer) interface means that entire messages are 182 * buffered by the host before a notification is sent to the BMC that 183 * there is data to be read. The first byte is the length and the 184 * message data follows. The read operation just tries to capture the 185 * whole before returning it to userspace. 186 * 187 * BT Message format : 188 * 189 * Byte 1 Byte 2 Byte 3 Byte 4 Byte 5:N 190 * Length NetFn/LUN Seq Cmd Data 191 * 192 */ 193static ssize_t bt_bmc_read(struct file *file, char __user *buf, 194 size_t count, loff_t *ppos) 195{ 196 struct bt_bmc *bt_bmc = file_bt_bmc(file); 197 u8 len; 198 int len_byte = 1; 199 u8 kbuffer[BT_BMC_BUFFER_SIZE]; 200 ssize_t ret = 0; 201 ssize_t nread; 202 203 WARN_ON(*ppos); 204 205 if (wait_event_interruptible(bt_bmc->queue, 206 bt_inb(bt_bmc, BT_CTRL) & BT_CTRL_H2B_ATN)) 207 return -ERESTARTSYS; 208 209 mutex_lock(&bt_bmc->mutex); 210 211 if (unlikely(!(bt_inb(bt_bmc, BT_CTRL) & BT_CTRL_H2B_ATN))) { 212 ret = -EIO; 213 goto out_unlock; 214 } 215 216 set_b_busy(bt_bmc); 217 clr_h2b_atn(bt_bmc); 218 clr_rd_ptr(bt_bmc); 219 220 /* 221 * The BT frames start with the message length, which does not 222 * include the length byte. 223 */ 224 kbuffer[0] = bt_read(bt_bmc); 225 len = kbuffer[0]; 226 227 /* We pass the length back to userspace as well */ 228 if (len + 1 > count) 229 len = count - 1; 230 231 while (len) { 232 nread = min_t(ssize_t, len, sizeof(kbuffer) - len_byte); 233 234 bt_readn(bt_bmc, kbuffer + len_byte, nread); 235 236 if (copy_to_user(buf, kbuffer, nread + len_byte)) { 237 ret = -EFAULT; 238 break; 239 } 240 len -= nread; 241 buf += nread + len_byte; 242 ret += nread + len_byte; 243 len_byte = 0; 244 } 245 246 clr_b_busy(bt_bmc); 247 248out_unlock: 249 mutex_unlock(&bt_bmc->mutex); 250 return ret; 251} 252 253/* 254 * BT Message response format : 255 * 256 * Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6:N 257 * Length NetFn/LUN Seq Cmd Code Data 258 */ 259static ssize_t bt_bmc_write(struct file *file, const char __user *buf, 260 size_t count, loff_t *ppos) 261{ 262 struct bt_bmc *bt_bmc = file_bt_bmc(file); 263 u8 kbuffer[BT_BMC_BUFFER_SIZE]; 264 ssize_t ret = 0; 265 ssize_t nwritten; 266 267 /* 268 * send a minimum response size 269 */ 270 if (count < 5) 271 return -EINVAL; 272 273 WARN_ON(*ppos); 274 275 /* 276 * There's no interrupt for clearing bmc busy so we have to 277 * poll 278 */ 279 if (wait_event_interruptible(bt_bmc->queue, 280 !(bt_inb(bt_bmc, BT_CTRL) & 281 (BT_CTRL_H_BUSY | BT_CTRL_B2H_ATN)))) 282 return -ERESTARTSYS; 283 284 mutex_lock(&bt_bmc->mutex); 285 286 if (unlikely(bt_inb(bt_bmc, BT_CTRL) & 287 (BT_CTRL_H_BUSY | BT_CTRL_B2H_ATN))) { 288 ret = -EIO; 289 goto out_unlock; 290 } 291 292 clr_wr_ptr(bt_bmc); 293 294 while (count) { 295 nwritten = min_t(ssize_t, count, sizeof(kbuffer)); 296 if (copy_from_user(&kbuffer, buf, nwritten)) { 297 ret = -EFAULT; 298 break; 299 } 300 301 bt_writen(bt_bmc, kbuffer, nwritten); 302 303 count -= nwritten; 304 buf += nwritten; 305 ret += nwritten; 306 } 307 308 set_b2h_atn(bt_bmc); 309 310out_unlock: 311 mutex_unlock(&bt_bmc->mutex); 312 return ret; 313} 314 315static long bt_bmc_ioctl(struct file *file, unsigned int cmd, 316 unsigned long param) 317{ 318 struct bt_bmc *bt_bmc = file_bt_bmc(file); 319 320 switch (cmd) { 321 case BT_BMC_IOCTL_SMS_ATN: 322 set_sms_atn(bt_bmc); 323 return 0; 324 } 325 return -EINVAL; 326} 327 328static int bt_bmc_release(struct inode *inode, struct file *file) 329{ 330 struct bt_bmc *bt_bmc = file_bt_bmc(file); 331 332 atomic_dec(&open_count); 333 set_b_busy(bt_bmc); 334 return 0; 335} 336 337static __poll_t bt_bmc_poll(struct file *file, poll_table *wait) 338{ 339 struct bt_bmc *bt_bmc = file_bt_bmc(file); 340 __poll_t mask = 0; 341 u8 ctrl; 342 343 poll_wait(file, &bt_bmc->queue, wait); 344 345 ctrl = bt_inb(bt_bmc, BT_CTRL); 346 347 if (ctrl & BT_CTRL_H2B_ATN) 348 mask |= EPOLLIN; 349 350 if (!(ctrl & (BT_CTRL_H_BUSY | BT_CTRL_B2H_ATN))) 351 mask |= EPOLLOUT; 352 353 return mask; 354} 355 356static const struct file_operations bt_bmc_fops = { 357 .owner = THIS_MODULE, 358 .open = bt_bmc_open, 359 .read = bt_bmc_read, 360 .write = bt_bmc_write, 361 .release = bt_bmc_release, 362 .poll = bt_bmc_poll, 363 .unlocked_ioctl = bt_bmc_ioctl, 364}; 365 366static void poll_timer(struct timer_list *t) 367{ 368 struct bt_bmc *bt_bmc = from_timer(bt_bmc, t, poll_timer); 369 370 bt_bmc->poll_timer.expires += msecs_to_jiffies(500); 371 wake_up(&bt_bmc->queue); 372 add_timer(&bt_bmc->poll_timer); 373} 374 375static irqreturn_t bt_bmc_irq(int irq, void *arg) 376{ 377 struct bt_bmc *bt_bmc = arg; 378 u32 reg; 379 int rc; 380 381 rc = regmap_read(bt_bmc->map, bt_bmc->offset + BT_CR2, ®); 382 if (rc) 383 return IRQ_NONE; 384 385 reg &= BT_CR2_IRQ_H2B | BT_CR2_IRQ_HBUSY; 386 if (!reg) 387 return IRQ_NONE; 388 389 /* ack pending IRQs */ 390 regmap_write(bt_bmc->map, bt_bmc->offset + BT_CR2, reg); 391 392 wake_up(&bt_bmc->queue); 393 return IRQ_HANDLED; 394} 395 396static int bt_bmc_config_irq(struct bt_bmc *bt_bmc, 397 struct platform_device *pdev) 398{ 399 struct device *dev = &pdev->dev; 400 int rc; 401 402 bt_bmc->irq = platform_get_irq_optional(pdev, 0); 403 if (bt_bmc->irq < 0) 404 return bt_bmc->irq; 405 406 rc = devm_request_irq(dev, bt_bmc->irq, bt_bmc_irq, IRQF_SHARED, 407 DEVICE_NAME, bt_bmc); 408 if (rc < 0) { 409 dev_warn(dev, "Unable to request IRQ %d\n", bt_bmc->irq); 410 bt_bmc->irq = rc; 411 return rc; 412 } 413 414 /* 415 * Configure IRQs on the bmc clearing the H2B and HBUSY bits; 416 * H2B will be asserted when the bmc has data for us; HBUSY 417 * will be cleared (along with B2H) when we can write the next 418 * message to the BT buffer 419 */ 420 rc = regmap_update_bits(bt_bmc->map, bt_bmc->offset + BT_CR1, 421 (BT_CR1_IRQ_H2B | BT_CR1_IRQ_HBUSY), 422 (BT_CR1_IRQ_H2B | BT_CR1_IRQ_HBUSY)); 423 424 return rc; 425} 426 427static int bt_bmc_probe(struct platform_device *pdev) 428{ 429 struct bt_bmc *bt_bmc; 430 struct device *dev; 431 int rc; 432 433 dev = &pdev->dev; 434 dev_info(dev, "Found bt bmc device\n"); 435 436 bt_bmc = devm_kzalloc(dev, sizeof(*bt_bmc), GFP_KERNEL); 437 if (!bt_bmc) 438 return -ENOMEM; 439 440 dev_set_drvdata(&pdev->dev, bt_bmc); 441 442 bt_bmc->map = syscon_node_to_regmap(pdev->dev.parent->of_node); 443 if (IS_ERR(bt_bmc->map)) { 444 void __iomem *base; 445 446 /* 447 * Assume it's not the MFD-based devicetree description, in 448 * which case generate a regmap ourselves 449 */ 450 base = devm_platform_ioremap_resource(pdev, 0); 451 if (IS_ERR(base)) 452 return PTR_ERR(base); 453 454 bt_bmc->map = devm_regmap_init_mmio(dev, base, &bt_regmap_cfg); 455 bt_bmc->offset = 0; 456 } else { 457 rc = of_property_read_u32(dev->of_node, "reg", &bt_bmc->offset); 458 if (rc) 459 return rc; 460 } 461 462 mutex_init(&bt_bmc->mutex); 463 init_waitqueue_head(&bt_bmc->queue); 464 465 bt_bmc->miscdev.minor = MISC_DYNAMIC_MINOR, 466 bt_bmc->miscdev.name = DEVICE_NAME, 467 bt_bmc->miscdev.fops = &bt_bmc_fops, 468 bt_bmc->miscdev.parent = dev; 469 rc = misc_register(&bt_bmc->miscdev); 470 if (rc) { 471 dev_err(dev, "Unable to register misc device\n"); 472 return rc; 473 } 474 475 bt_bmc_config_irq(bt_bmc, pdev); 476 477 if (bt_bmc->irq >= 0) { 478 dev_info(dev, "Using IRQ %d\n", bt_bmc->irq); 479 } else { 480 dev_info(dev, "No IRQ; using timer\n"); 481 timer_setup(&bt_bmc->poll_timer, poll_timer, 0); 482 bt_bmc->poll_timer.expires = jiffies + msecs_to_jiffies(10); 483 add_timer(&bt_bmc->poll_timer); 484 } 485 486 regmap_write(bt_bmc->map, bt_bmc->offset + BT_CR0, 487 (BT_IO_BASE << BT_CR0_IO_BASE) | 488 (BT_IRQ << BT_CR0_IRQ) | 489 BT_CR0_EN_CLR_SLV_RDP | 490 BT_CR0_EN_CLR_SLV_WRP | 491 BT_CR0_ENABLE_IBT); 492 493 clr_b_busy(bt_bmc); 494 495 return 0; 496} 497 498static int bt_bmc_remove(struct platform_device *pdev) 499{ 500 struct bt_bmc *bt_bmc = dev_get_drvdata(&pdev->dev); 501 502 misc_deregister(&bt_bmc->miscdev); 503 if (bt_bmc->irq < 0) 504 del_timer_sync(&bt_bmc->poll_timer); 505 return 0; 506} 507 508static const struct of_device_id bt_bmc_match[] = { 509 { .compatible = "aspeed,ast2400-ibt-bmc" }, 510 { .compatible = "aspeed,ast2500-ibt-bmc" }, 511 { }, 512}; 513 514static struct platform_driver bt_bmc_driver = { 515 .driver = { 516 .name = DEVICE_NAME, 517 .of_match_table = bt_bmc_match, 518 }, 519 .probe = bt_bmc_probe, 520 .remove = bt_bmc_remove, 521}; 522 523module_platform_driver(bt_bmc_driver); 524 525MODULE_DEVICE_TABLE(of, bt_bmc_match); 526MODULE_LICENSE("GPL"); 527MODULE_AUTHOR("Alistair Popple <alistair@popple.id.au>"); 528MODULE_DESCRIPTION("Linux device interface to the IPMI BT interface"); 529