1// SPDX-License-Identifier: GPL-2.0 2// Copyright (c) 2018 MediaTek Inc. 3 4/* 5 * Bluetooth support for MediaTek serial devices 6 * 7 * Author: Sean Wang <sean.wang@mediatek.com> 8 * 9 */ 10 11#include <asm/unaligned.h> 12#include <linux/atomic.h> 13#include <linux/clk.h> 14#include <linux/firmware.h> 15#include <linux/gpio/consumer.h> 16#include <linux/iopoll.h> 17#include <linux/kernel.h> 18#include <linux/module.h> 19#include <linux/of.h> 20#include <linux/of_device.h> 21#include <linux/pinctrl/consumer.h> 22#include <linux/pm_runtime.h> 23#include <linux/regulator/consumer.h> 24#include <linux/serdev.h> 25#include <linux/skbuff.h> 26 27#include <net/bluetooth/bluetooth.h> 28#include <net/bluetooth/hci_core.h> 29 30#include "h4_recv.h" 31 32#define VERSION "0.2" 33 34#define FIRMWARE_MT7622 "mediatek/mt7622pr2h.bin" 35#define FIRMWARE_MT7663 "mediatek/mt7663pr2h.bin" 36#define FIRMWARE_MT7668 "mediatek/mt7668pr2h.bin" 37 38#define MTK_STP_TLR_SIZE 2 39 40#define BTMTKUART_TX_STATE_ACTIVE 1 41#define BTMTKUART_TX_STATE_WAKEUP 2 42#define BTMTKUART_TX_WAIT_VND_EVT 3 43#define BTMTKUART_REQUIRED_WAKEUP 4 44 45#define BTMTKUART_FLAG_STANDALONE_HW BIT(0) 46 47enum { 48 MTK_WMT_PATCH_DWNLD = 0x1, 49 MTK_WMT_TEST = 0x2, 50 MTK_WMT_WAKEUP = 0x3, 51 MTK_WMT_HIF = 0x4, 52 MTK_WMT_FUNC_CTRL = 0x6, 53 MTK_WMT_RST = 0x7, 54 MTK_WMT_SEMAPHORE = 0x17, 55}; 56 57enum { 58 BTMTK_WMT_INVALID, 59 BTMTK_WMT_PATCH_UNDONE, 60 BTMTK_WMT_PATCH_DONE, 61 BTMTK_WMT_ON_UNDONE, 62 BTMTK_WMT_ON_DONE, 63 BTMTK_WMT_ON_PROGRESS, 64}; 65 66struct mtk_stp_hdr { 67 u8 prefix; 68 __be16 dlen; 69 u8 cs; 70} __packed; 71 72struct btmtkuart_data { 73 unsigned int flags; 74 const char *fwname; 75}; 76 77struct mtk_wmt_hdr { 78 u8 dir; 79 u8 op; 80 __le16 dlen; 81 u8 flag; 82} __packed; 83 84struct mtk_hci_wmt_cmd { 85 struct mtk_wmt_hdr hdr; 86 u8 data[256]; 87} __packed; 88 89struct btmtk_hci_wmt_evt { 90 struct hci_event_hdr hhdr; 91 struct mtk_wmt_hdr whdr; 92} __packed; 93 94struct btmtk_hci_wmt_evt_funcc { 95 struct btmtk_hci_wmt_evt hwhdr; 96 __be16 status; 97} __packed; 98 99struct btmtk_tci_sleep { 100 u8 mode; 101 __le16 duration; 102 __le16 host_duration; 103 u8 host_wakeup_pin; 104 u8 time_compensation; 105} __packed; 106 107struct btmtk_hci_wmt_params { 108 u8 op; 109 u8 flag; 110 u16 dlen; 111 const void *data; 112 u32 *status; 113}; 114 115struct btmtkuart_dev { 116 struct hci_dev *hdev; 117 struct serdev_device *serdev; 118 119 struct clk *clk; 120 struct clk *osc; 121 struct regulator *vcc; 122 struct gpio_desc *reset; 123 struct gpio_desc *boot; 124 struct pinctrl *pinctrl; 125 struct pinctrl_state *pins_runtime; 126 struct pinctrl_state *pins_boot; 127 speed_t desired_speed; 128 speed_t curr_speed; 129 130 struct work_struct tx_work; 131 unsigned long tx_state; 132 struct sk_buff_head txq; 133 134 struct sk_buff *rx_skb; 135 struct sk_buff *evt_skb; 136 137 u8 stp_pad[6]; 138 u8 stp_cursor; 139 u16 stp_dlen; 140 141 const struct btmtkuart_data *data; 142}; 143 144#define btmtkuart_is_standalone(bdev) \ 145 ((bdev)->data->flags & BTMTKUART_FLAG_STANDALONE_HW) 146#define btmtkuart_is_builtin_soc(bdev) \ 147 !((bdev)->data->flags & BTMTKUART_FLAG_STANDALONE_HW) 148 149static int mtk_hci_wmt_sync(struct hci_dev *hdev, 150 struct btmtk_hci_wmt_params *wmt_params) 151{ 152 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); 153 struct btmtk_hci_wmt_evt_funcc *wmt_evt_funcc; 154 u32 hlen, status = BTMTK_WMT_INVALID; 155 struct btmtk_hci_wmt_evt *wmt_evt; 156 struct mtk_hci_wmt_cmd wc; 157 struct mtk_wmt_hdr *hdr; 158 int err; 159 160 hlen = sizeof(*hdr) + wmt_params->dlen; 161 if (hlen > 255) { 162 err = -EINVAL; 163 goto err_free_skb; 164 } 165 166 hdr = (struct mtk_wmt_hdr *)&wc; 167 hdr->dir = 1; 168 hdr->op = wmt_params->op; 169 hdr->dlen = cpu_to_le16(wmt_params->dlen + 1); 170 hdr->flag = wmt_params->flag; 171 memcpy(wc.data, wmt_params->data, wmt_params->dlen); 172 173 set_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state); 174 175 err = __hci_cmd_send(hdev, 0xfc6f, hlen, &wc); 176 if (err < 0) { 177 clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state); 178 goto err_free_skb; 179 } 180 181 /* The vendor specific WMT commands are all answered by a vendor 182 * specific event and will not have the Command Status or Command 183 * Complete as with usual HCI command flow control. 184 * 185 * After sending the command, wait for BTMTKUART_TX_WAIT_VND_EVT 186 * state to be cleared. The driver specific event receive routine 187 * will clear that state and with that indicate completion of the 188 * WMT command. 189 */ 190 err = wait_on_bit_timeout(&bdev->tx_state, BTMTKUART_TX_WAIT_VND_EVT, 191 TASK_INTERRUPTIBLE, HCI_INIT_TIMEOUT); 192 if (err == -EINTR) { 193 bt_dev_err(hdev, "Execution of wmt command interrupted"); 194 clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state); 195 goto err_free_skb; 196 } 197 198 if (err) { 199 bt_dev_err(hdev, "Execution of wmt command timed out"); 200 clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state); 201 err = -ETIMEDOUT; 202 goto err_free_skb; 203 } 204 205 /* Parse and handle the return WMT event */ 206 wmt_evt = (struct btmtk_hci_wmt_evt *)bdev->evt_skb->data; 207 if (wmt_evt->whdr.op != hdr->op) { 208 bt_dev_err(hdev, "Wrong op received %d expected %d", 209 wmt_evt->whdr.op, hdr->op); 210 err = -EIO; 211 goto err_free_skb; 212 } 213 214 switch (wmt_evt->whdr.op) { 215 case MTK_WMT_SEMAPHORE: 216 if (wmt_evt->whdr.flag == 2) 217 status = BTMTK_WMT_PATCH_UNDONE; 218 else 219 status = BTMTK_WMT_PATCH_DONE; 220 break; 221 case MTK_WMT_FUNC_CTRL: 222 wmt_evt_funcc = (struct btmtk_hci_wmt_evt_funcc *)wmt_evt; 223 if (be16_to_cpu(wmt_evt_funcc->status) == 0x404) 224 status = BTMTK_WMT_ON_DONE; 225 else if (be16_to_cpu(wmt_evt_funcc->status) == 0x420) 226 status = BTMTK_WMT_ON_PROGRESS; 227 else 228 status = BTMTK_WMT_ON_UNDONE; 229 break; 230 } 231 232 if (wmt_params->status) 233 *wmt_params->status = status; 234 235err_free_skb: 236 kfree_skb(bdev->evt_skb); 237 bdev->evt_skb = NULL; 238 239 return err; 240} 241 242static int mtk_setup_firmware(struct hci_dev *hdev, const char *fwname) 243{ 244 struct btmtk_hci_wmt_params wmt_params; 245 const struct firmware *fw; 246 const u8 *fw_ptr; 247 size_t fw_size; 248 int err, dlen; 249 u8 flag; 250 251 err = request_firmware(&fw, fwname, &hdev->dev); 252 if (err < 0) { 253 bt_dev_err(hdev, "Failed to load firmware file (%d)", err); 254 return err; 255 } 256 257 fw_ptr = fw->data; 258 fw_size = fw->size; 259 260 /* The size of patch header is 30 bytes, should be skip */ 261 if (fw_size < 30) { 262 err = -EINVAL; 263 goto free_fw; 264 } 265 266 fw_size -= 30; 267 fw_ptr += 30; 268 flag = 1; 269 270 wmt_params.op = MTK_WMT_PATCH_DWNLD; 271 wmt_params.status = NULL; 272 273 while (fw_size > 0) { 274 dlen = min_t(int, 250, fw_size); 275 276 /* Tell device the position in sequence */ 277 if (fw_size - dlen <= 0) 278 flag = 3; 279 else if (fw_size < fw->size - 30) 280 flag = 2; 281 282 wmt_params.flag = flag; 283 wmt_params.dlen = dlen; 284 wmt_params.data = fw_ptr; 285 286 err = mtk_hci_wmt_sync(hdev, &wmt_params); 287 if (err < 0) { 288 bt_dev_err(hdev, "Failed to send wmt patch dwnld (%d)", 289 err); 290 goto free_fw; 291 } 292 293 fw_size -= dlen; 294 fw_ptr += dlen; 295 } 296 297 wmt_params.op = MTK_WMT_RST; 298 wmt_params.flag = 4; 299 wmt_params.dlen = 0; 300 wmt_params.data = NULL; 301 wmt_params.status = NULL; 302 303 /* Activate funciton the firmware providing to */ 304 err = mtk_hci_wmt_sync(hdev, &wmt_params); 305 if (err < 0) { 306 bt_dev_err(hdev, "Failed to send wmt rst (%d)", err); 307 goto free_fw; 308 } 309 310 /* Wait a few moments for firmware activation done */ 311 usleep_range(10000, 12000); 312 313free_fw: 314 release_firmware(fw); 315 return err; 316} 317 318static int btmtkuart_recv_event(struct hci_dev *hdev, struct sk_buff *skb) 319{ 320 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); 321 struct hci_event_hdr *hdr = (void *)skb->data; 322 int err; 323 324 /* Fix up the vendor event id with 0xff for vendor specific instead 325 * of 0xe4 so that event send via monitoring socket can be parsed 326 * properly. 327 */ 328 if (hdr->evt == 0xe4) 329 hdr->evt = HCI_EV_VENDOR; 330 331 /* When someone waits for the WMT event, the skb is being cloned 332 * and being processed the events from there then. 333 */ 334 if (test_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state)) { 335 bdev->evt_skb = skb_clone(skb, GFP_KERNEL); 336 if (!bdev->evt_skb) { 337 err = -ENOMEM; 338 goto err_out; 339 } 340 } 341 342 err = hci_recv_frame(hdev, skb); 343 if (err < 0) 344 goto err_free_skb; 345 346 if (hdr->evt == HCI_EV_VENDOR) { 347 if (test_and_clear_bit(BTMTKUART_TX_WAIT_VND_EVT, 348 &bdev->tx_state)) { 349 /* Barrier to sync with other CPUs */ 350 smp_mb__after_atomic(); 351 wake_up_bit(&bdev->tx_state, BTMTKUART_TX_WAIT_VND_EVT); 352 } 353 } 354 355 return 0; 356 357err_free_skb: 358 kfree_skb(bdev->evt_skb); 359 bdev->evt_skb = NULL; 360 361err_out: 362 return err; 363} 364 365static const struct h4_recv_pkt mtk_recv_pkts[] = { 366 { H4_RECV_ACL, .recv = hci_recv_frame }, 367 { H4_RECV_SCO, .recv = hci_recv_frame }, 368 { H4_RECV_EVENT, .recv = btmtkuart_recv_event }, 369}; 370 371static void btmtkuart_tx_work(struct work_struct *work) 372{ 373 struct btmtkuart_dev *bdev = container_of(work, struct btmtkuart_dev, 374 tx_work); 375 struct serdev_device *serdev = bdev->serdev; 376 struct hci_dev *hdev = bdev->hdev; 377 378 while (1) { 379 clear_bit(BTMTKUART_TX_STATE_WAKEUP, &bdev->tx_state); 380 381 while (1) { 382 struct sk_buff *skb = skb_dequeue(&bdev->txq); 383 int len; 384 385 if (!skb) 386 break; 387 388 len = serdev_device_write_buf(serdev, skb->data, 389 skb->len); 390 hdev->stat.byte_tx += len; 391 392 skb_pull(skb, len); 393 if (skb->len > 0) { 394 skb_queue_head(&bdev->txq, skb); 395 break; 396 } 397 398 switch (hci_skb_pkt_type(skb)) { 399 case HCI_COMMAND_PKT: 400 hdev->stat.cmd_tx++; 401 break; 402 case HCI_ACLDATA_PKT: 403 hdev->stat.acl_tx++; 404 break; 405 case HCI_SCODATA_PKT: 406 hdev->stat.sco_tx++; 407 break; 408 } 409 410 kfree_skb(skb); 411 } 412 413 if (!test_bit(BTMTKUART_TX_STATE_WAKEUP, &bdev->tx_state)) 414 break; 415 } 416 417 clear_bit(BTMTKUART_TX_STATE_ACTIVE, &bdev->tx_state); 418} 419 420static void btmtkuart_tx_wakeup(struct btmtkuart_dev *bdev) 421{ 422 if (test_and_set_bit(BTMTKUART_TX_STATE_ACTIVE, &bdev->tx_state)) 423 set_bit(BTMTKUART_TX_STATE_WAKEUP, &bdev->tx_state); 424 425 schedule_work(&bdev->tx_work); 426} 427 428static const unsigned char * 429mtk_stp_split(struct btmtkuart_dev *bdev, const unsigned char *data, int count, 430 int *sz_h4) 431{ 432 struct mtk_stp_hdr *shdr; 433 434 /* The cursor is reset when all the data of STP is consumed out */ 435 if (!bdev->stp_dlen && bdev->stp_cursor >= 6) 436 bdev->stp_cursor = 0; 437 438 /* Filling pad until all STP info is obtained */ 439 while (bdev->stp_cursor < 6 && count > 0) { 440 bdev->stp_pad[bdev->stp_cursor] = *data; 441 bdev->stp_cursor++; 442 data++; 443 count--; 444 } 445 446 /* Retrieve STP info and have a sanity check */ 447 if (!bdev->stp_dlen && bdev->stp_cursor >= 6) { 448 shdr = (struct mtk_stp_hdr *)&bdev->stp_pad[2]; 449 bdev->stp_dlen = be16_to_cpu(shdr->dlen) & 0x0fff; 450 451 /* Resync STP when unexpected data is being read */ 452 if (shdr->prefix != 0x80 || bdev->stp_dlen > 2048) { 453 bt_dev_err(bdev->hdev, "stp format unexpect (%d, %d)", 454 shdr->prefix, bdev->stp_dlen); 455 bdev->stp_cursor = 2; 456 bdev->stp_dlen = 0; 457 } 458 } 459 460 /* Directly quit when there's no data found for H4 can process */ 461 if (count <= 0) 462 return NULL; 463 464 /* Tranlate to how much the size of data H4 can handle so far */ 465 *sz_h4 = min_t(int, count, bdev->stp_dlen); 466 467 /* Update the remaining size of STP packet */ 468 bdev->stp_dlen -= *sz_h4; 469 470 /* Data points to STP payload which can be handled by H4 */ 471 return data; 472} 473 474static void btmtkuart_recv(struct hci_dev *hdev, const u8 *data, size_t count) 475{ 476 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); 477 const unsigned char *p_left = data, *p_h4; 478 int sz_left = count, sz_h4, adv; 479 int err; 480 481 while (sz_left > 0) { 482 /* The serial data received from MT7622 BT controller is 483 * at all time padded around with the STP header and tailer. 484 * 485 * A full STP packet is looking like 486 * ----------------------------------- 487 * | STP header | H:4 | STP tailer | 488 * ----------------------------------- 489 * but it doesn't guarantee to contain a full H:4 packet which 490 * means that it's possible for multiple STP packets forms a 491 * full H:4 packet that means extra STP header + length doesn't 492 * indicate a full H:4 frame, things can fragment. Whose length 493 * recorded in STP header just shows up the most length the 494 * H:4 engine can handle currently. 495 */ 496 497 p_h4 = mtk_stp_split(bdev, p_left, sz_left, &sz_h4); 498 if (!p_h4) 499 break; 500 501 adv = p_h4 - p_left; 502 sz_left -= adv; 503 p_left += adv; 504 505 bdev->rx_skb = h4_recv_buf(bdev->hdev, bdev->rx_skb, p_h4, 506 sz_h4, mtk_recv_pkts, 507 ARRAY_SIZE(mtk_recv_pkts)); 508 if (IS_ERR(bdev->rx_skb)) { 509 err = PTR_ERR(bdev->rx_skb); 510 bt_dev_err(bdev->hdev, 511 "Frame reassembly failed (%d)", err); 512 bdev->rx_skb = NULL; 513 return; 514 } 515 516 sz_left -= sz_h4; 517 p_left += sz_h4; 518 } 519} 520 521static int btmtkuart_receive_buf(struct serdev_device *serdev, const u8 *data, 522 size_t count) 523{ 524 struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev); 525 526 btmtkuart_recv(bdev->hdev, data, count); 527 528 bdev->hdev->stat.byte_rx += count; 529 530 return count; 531} 532 533static void btmtkuart_write_wakeup(struct serdev_device *serdev) 534{ 535 struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev); 536 537 btmtkuart_tx_wakeup(bdev); 538} 539 540static const struct serdev_device_ops btmtkuart_client_ops = { 541 .receive_buf = btmtkuart_receive_buf, 542 .write_wakeup = btmtkuart_write_wakeup, 543}; 544 545static int btmtkuart_open(struct hci_dev *hdev) 546{ 547 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); 548 struct device *dev; 549 int err; 550 551 err = serdev_device_open(bdev->serdev); 552 if (err) { 553 bt_dev_err(hdev, "Unable to open UART device %s", 554 dev_name(&bdev->serdev->dev)); 555 goto err_open; 556 } 557 558 if (btmtkuart_is_standalone(bdev)) { 559 if (bdev->curr_speed != bdev->desired_speed) 560 err = serdev_device_set_baudrate(bdev->serdev, 561 115200); 562 else 563 err = serdev_device_set_baudrate(bdev->serdev, 564 bdev->desired_speed); 565 566 if (err < 0) { 567 bt_dev_err(hdev, "Unable to set baudrate UART device %s", 568 dev_name(&bdev->serdev->dev)); 569 goto err_serdev_close; 570 } 571 572 serdev_device_set_flow_control(bdev->serdev, false); 573 } 574 575 bdev->stp_cursor = 2; 576 bdev->stp_dlen = 0; 577 578 dev = &bdev->serdev->dev; 579 580 /* Enable the power domain and clock the device requires */ 581 pm_runtime_enable(dev); 582 err = pm_runtime_get_sync(dev); 583 if (err < 0) { 584 pm_runtime_put_noidle(dev); 585 goto err_disable_rpm; 586 } 587 588 err = clk_prepare_enable(bdev->clk); 589 if (err < 0) 590 goto err_put_rpm; 591 592 return 0; 593 594err_put_rpm: 595 pm_runtime_put_sync(dev); 596err_disable_rpm: 597 pm_runtime_disable(dev); 598err_serdev_close: 599 serdev_device_close(bdev->serdev); 600err_open: 601 return err; 602} 603 604static int btmtkuart_close(struct hci_dev *hdev) 605{ 606 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); 607 struct device *dev = &bdev->serdev->dev; 608 609 /* Shutdown the clock and power domain the device requires */ 610 clk_disable_unprepare(bdev->clk); 611 pm_runtime_put_sync(dev); 612 pm_runtime_disable(dev); 613 614 serdev_device_close(bdev->serdev); 615 616 return 0; 617} 618 619static int btmtkuart_flush(struct hci_dev *hdev) 620{ 621 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); 622 623 /* Flush any pending characters */ 624 serdev_device_write_flush(bdev->serdev); 625 skb_queue_purge(&bdev->txq); 626 627 cancel_work_sync(&bdev->tx_work); 628 629 kfree_skb(bdev->rx_skb); 630 bdev->rx_skb = NULL; 631 632 bdev->stp_cursor = 2; 633 bdev->stp_dlen = 0; 634 635 return 0; 636} 637 638static int btmtkuart_func_query(struct hci_dev *hdev) 639{ 640 struct btmtk_hci_wmt_params wmt_params; 641 int status, err; 642 u8 param = 0; 643 644 /* Query whether the function is enabled */ 645 wmt_params.op = MTK_WMT_FUNC_CTRL; 646 wmt_params.flag = 4; 647 wmt_params.dlen = sizeof(param); 648 wmt_params.data = ¶m; 649 wmt_params.status = &status; 650 651 err = mtk_hci_wmt_sync(hdev, &wmt_params); 652 if (err < 0) { 653 bt_dev_err(hdev, "Failed to query function status (%d)", err); 654 return err; 655 } 656 657 return status; 658} 659 660static int btmtkuart_change_baudrate(struct hci_dev *hdev) 661{ 662 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); 663 struct btmtk_hci_wmt_params wmt_params; 664 __le32 baudrate; 665 u8 param; 666 int err; 667 668 /* Indicate the device to enter the probe state the host is 669 * ready to change a new baudrate. 670 */ 671 baudrate = cpu_to_le32(bdev->desired_speed); 672 wmt_params.op = MTK_WMT_HIF; 673 wmt_params.flag = 1; 674 wmt_params.dlen = 4; 675 wmt_params.data = &baudrate; 676 wmt_params.status = NULL; 677 678 err = mtk_hci_wmt_sync(hdev, &wmt_params); 679 if (err < 0) { 680 bt_dev_err(hdev, "Failed to device baudrate (%d)", err); 681 return err; 682 } 683 684 err = serdev_device_set_baudrate(bdev->serdev, 685 bdev->desired_speed); 686 if (err < 0) { 687 bt_dev_err(hdev, "Failed to set up host baudrate (%d)", 688 err); 689 return err; 690 } 691 692 serdev_device_set_flow_control(bdev->serdev, false); 693 694 /* Send a dummy byte 0xff to activate the new baudrate */ 695 param = 0xff; 696 err = serdev_device_write_buf(bdev->serdev, ¶m, sizeof(param)); 697 if (err < 0 || err < sizeof(param)) 698 return err; 699 700 serdev_device_wait_until_sent(bdev->serdev, 0); 701 702 /* Wait some time for the device changing baudrate done */ 703 usleep_range(20000, 22000); 704 705 /* Test the new baudrate */ 706 wmt_params.op = MTK_WMT_TEST; 707 wmt_params.flag = 7; 708 wmt_params.dlen = 0; 709 wmt_params.data = NULL; 710 wmt_params.status = NULL; 711 712 err = mtk_hci_wmt_sync(hdev, &wmt_params); 713 if (err < 0) { 714 bt_dev_err(hdev, "Failed to test new baudrate (%d)", 715 err); 716 return err; 717 } 718 719 bdev->curr_speed = bdev->desired_speed; 720 721 return 0; 722} 723 724static int btmtkuart_setup(struct hci_dev *hdev) 725{ 726 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); 727 struct btmtk_hci_wmt_params wmt_params; 728 ktime_t calltime, delta, rettime; 729 struct btmtk_tci_sleep tci_sleep; 730 unsigned long long duration; 731 struct sk_buff *skb; 732 int err, status; 733 u8 param = 0x1; 734 735 calltime = ktime_get(); 736 737 /* Wakeup MCUSYS is required for certain devices before we start to 738 * do any setups. 739 */ 740 if (test_bit(BTMTKUART_REQUIRED_WAKEUP, &bdev->tx_state)) { 741 wmt_params.op = MTK_WMT_WAKEUP; 742 wmt_params.flag = 3; 743 wmt_params.dlen = 0; 744 wmt_params.data = NULL; 745 wmt_params.status = NULL; 746 747 err = mtk_hci_wmt_sync(hdev, &wmt_params); 748 if (err < 0) { 749 bt_dev_err(hdev, "Failed to wakeup the chip (%d)", err); 750 return err; 751 } 752 753 clear_bit(BTMTKUART_REQUIRED_WAKEUP, &bdev->tx_state); 754 } 755 756 if (btmtkuart_is_standalone(bdev)) 757 btmtkuart_change_baudrate(hdev); 758 759 /* Query whether the firmware is already download */ 760 wmt_params.op = MTK_WMT_SEMAPHORE; 761 wmt_params.flag = 1; 762 wmt_params.dlen = 0; 763 wmt_params.data = NULL; 764 wmt_params.status = &status; 765 766 err = mtk_hci_wmt_sync(hdev, &wmt_params); 767 if (err < 0) { 768 bt_dev_err(hdev, "Failed to query firmware status (%d)", err); 769 return err; 770 } 771 772 if (status == BTMTK_WMT_PATCH_DONE) { 773 bt_dev_info(hdev, "Firmware already downloaded"); 774 goto ignore_setup_fw; 775 } 776 777 /* Setup a firmware which the device definitely requires */ 778 err = mtk_setup_firmware(hdev, bdev->data->fwname); 779 if (err < 0) 780 return err; 781 782ignore_setup_fw: 783 /* Query whether the device is already enabled */ 784 err = readx_poll_timeout(btmtkuart_func_query, hdev, status, 785 status < 0 || status != BTMTK_WMT_ON_PROGRESS, 786 2000, 5000000); 787 /* -ETIMEDOUT happens */ 788 if (err < 0) 789 return err; 790 791 /* The other errors happen in btusb_mtk_func_query */ 792 if (status < 0) 793 return status; 794 795 if (status == BTMTK_WMT_ON_DONE) { 796 bt_dev_info(hdev, "function already on"); 797 goto ignore_func_on; 798 } 799 800 /* Enable Bluetooth protocol */ 801 wmt_params.op = MTK_WMT_FUNC_CTRL; 802 wmt_params.flag = 0; 803 wmt_params.dlen = sizeof(param); 804 wmt_params.data = ¶m; 805 wmt_params.status = NULL; 806 807 err = mtk_hci_wmt_sync(hdev, &wmt_params); 808 if (err < 0) { 809 bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err); 810 return err; 811 } 812 813ignore_func_on: 814 /* Apply the low power environment setup */ 815 tci_sleep.mode = 0x5; 816 tci_sleep.duration = cpu_to_le16(0x640); 817 tci_sleep.host_duration = cpu_to_le16(0x640); 818 tci_sleep.host_wakeup_pin = 0; 819 tci_sleep.time_compensation = 0; 820 821 skb = __hci_cmd_sync(hdev, 0xfc7a, sizeof(tci_sleep), &tci_sleep, 822 HCI_INIT_TIMEOUT); 823 if (IS_ERR(skb)) { 824 err = PTR_ERR(skb); 825 bt_dev_err(hdev, "Failed to apply low power setting (%d)", err); 826 return err; 827 } 828 kfree_skb(skb); 829 830 rettime = ktime_get(); 831 delta = ktime_sub(rettime, calltime); 832 duration = (unsigned long long)ktime_to_ns(delta) >> 10; 833 834 bt_dev_info(hdev, "Device setup in %llu usecs", duration); 835 836 return 0; 837} 838 839static int btmtkuart_shutdown(struct hci_dev *hdev) 840{ 841 struct btmtk_hci_wmt_params wmt_params; 842 u8 param = 0x0; 843 int err; 844 845 /* Disable the device */ 846 wmt_params.op = MTK_WMT_FUNC_CTRL; 847 wmt_params.flag = 0; 848 wmt_params.dlen = sizeof(param); 849 wmt_params.data = ¶m; 850 wmt_params.status = NULL; 851 852 err = mtk_hci_wmt_sync(hdev, &wmt_params); 853 if (err < 0) { 854 bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err); 855 return err; 856 } 857 858 return 0; 859} 860 861static int btmtkuart_send_frame(struct hci_dev *hdev, struct sk_buff *skb) 862{ 863 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); 864 struct mtk_stp_hdr *shdr; 865 int err, dlen, type = 0; 866 867 /* Prepend skb with frame type */ 868 memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1); 869 870 /* Make sure that there is enough rooms for STP header and trailer */ 871 if (unlikely(skb_headroom(skb) < sizeof(*shdr)) || 872 (skb_tailroom(skb) < MTK_STP_TLR_SIZE)) { 873 err = pskb_expand_head(skb, sizeof(*shdr), MTK_STP_TLR_SIZE, 874 GFP_ATOMIC); 875 if (err < 0) 876 return err; 877 } 878 879 /* Add the STP header */ 880 dlen = skb->len; 881 shdr = skb_push(skb, sizeof(*shdr)); 882 shdr->prefix = 0x80; 883 shdr->dlen = cpu_to_be16((dlen & 0x0fff) | (type << 12)); 884 shdr->cs = 0; /* MT7622 doesn't care about checksum value */ 885 886 /* Add the STP trailer */ 887 skb_put_zero(skb, MTK_STP_TLR_SIZE); 888 889 skb_queue_tail(&bdev->txq, skb); 890 891 btmtkuart_tx_wakeup(bdev); 892 return 0; 893} 894 895static int btmtkuart_parse_dt(struct serdev_device *serdev) 896{ 897 struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev); 898 struct device_node *node = serdev->dev.of_node; 899 u32 speed = 921600; 900 int err; 901 902 if (btmtkuart_is_standalone(bdev)) { 903 of_property_read_u32(node, "current-speed", &speed); 904 905 bdev->desired_speed = speed; 906 907 bdev->vcc = devm_regulator_get(&serdev->dev, "vcc"); 908 if (IS_ERR(bdev->vcc)) { 909 err = PTR_ERR(bdev->vcc); 910 return err; 911 } 912 913 bdev->osc = devm_clk_get_optional(&serdev->dev, "osc"); 914 if (IS_ERR(bdev->osc)) { 915 err = PTR_ERR(bdev->osc); 916 return err; 917 } 918 919 bdev->boot = devm_gpiod_get_optional(&serdev->dev, "boot", 920 GPIOD_OUT_LOW); 921 if (IS_ERR(bdev->boot)) { 922 err = PTR_ERR(bdev->boot); 923 return err; 924 } 925 926 bdev->pinctrl = devm_pinctrl_get(&serdev->dev); 927 if (IS_ERR(bdev->pinctrl)) { 928 err = PTR_ERR(bdev->pinctrl); 929 return err; 930 } 931 932 bdev->pins_boot = pinctrl_lookup_state(bdev->pinctrl, 933 "default"); 934 if (IS_ERR(bdev->pins_boot) && !bdev->boot) { 935 err = PTR_ERR(bdev->pins_boot); 936 dev_err(&serdev->dev, 937 "Should assign RXD to LOW at boot stage\n"); 938 return err; 939 } 940 941 bdev->pins_runtime = pinctrl_lookup_state(bdev->pinctrl, 942 "runtime"); 943 if (IS_ERR(bdev->pins_runtime)) { 944 err = PTR_ERR(bdev->pins_runtime); 945 return err; 946 } 947 948 bdev->reset = devm_gpiod_get_optional(&serdev->dev, "reset", 949 GPIOD_OUT_LOW); 950 if (IS_ERR(bdev->reset)) { 951 err = PTR_ERR(bdev->reset); 952 return err; 953 } 954 } else if (btmtkuart_is_builtin_soc(bdev)) { 955 bdev->clk = devm_clk_get(&serdev->dev, "ref"); 956 if (IS_ERR(bdev->clk)) 957 return PTR_ERR(bdev->clk); 958 } 959 960 return 0; 961} 962 963static int btmtkuart_probe(struct serdev_device *serdev) 964{ 965 struct btmtkuart_dev *bdev; 966 struct hci_dev *hdev; 967 int err; 968 969 bdev = devm_kzalloc(&serdev->dev, sizeof(*bdev), GFP_KERNEL); 970 if (!bdev) 971 return -ENOMEM; 972 973 bdev->data = of_device_get_match_data(&serdev->dev); 974 if (!bdev->data) 975 return -ENODEV; 976 977 bdev->serdev = serdev; 978 serdev_device_set_drvdata(serdev, bdev); 979 980 serdev_device_set_client_ops(serdev, &btmtkuart_client_ops); 981 982 err = btmtkuart_parse_dt(serdev); 983 if (err < 0) 984 return err; 985 986 INIT_WORK(&bdev->tx_work, btmtkuart_tx_work); 987 skb_queue_head_init(&bdev->txq); 988 989 /* Initialize and register HCI device */ 990 hdev = hci_alloc_dev(); 991 if (!hdev) { 992 dev_err(&serdev->dev, "Can't allocate HCI device\n"); 993 return -ENOMEM; 994 } 995 996 bdev->hdev = hdev; 997 998 hdev->bus = HCI_UART; 999 hci_set_drvdata(hdev, bdev); 1000 1001 hdev->open = btmtkuart_open; 1002 hdev->close = btmtkuart_close; 1003 hdev->flush = btmtkuart_flush; 1004 hdev->setup = btmtkuart_setup; 1005 hdev->shutdown = btmtkuart_shutdown; 1006 hdev->send = btmtkuart_send_frame; 1007 SET_HCIDEV_DEV(hdev, &serdev->dev); 1008 1009 hdev->manufacturer = 70; 1010 set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks); 1011 1012 if (btmtkuart_is_standalone(bdev)) { 1013 err = clk_prepare_enable(bdev->osc); 1014 if (err < 0) 1015 goto err_hci_free_dev; 1016 1017 if (bdev->boot) { 1018 gpiod_set_value_cansleep(bdev->boot, 1); 1019 } else { 1020 /* Switch to the specific pin state for the booting 1021 * requires. 1022 */ 1023 pinctrl_select_state(bdev->pinctrl, bdev->pins_boot); 1024 } 1025 1026 /* Power on */ 1027 err = regulator_enable(bdev->vcc); 1028 if (err < 0) 1029 goto err_clk_disable_unprepare; 1030 1031 /* Reset if the reset-gpios is available otherwise the board 1032 * -level design should be guaranteed. 1033 */ 1034 if (bdev->reset) { 1035 gpiod_set_value_cansleep(bdev->reset, 1); 1036 usleep_range(1000, 2000); 1037 gpiod_set_value_cansleep(bdev->reset, 0); 1038 } 1039 1040 /* Wait some time until device got ready and switch to the pin 1041 * mode the device requires for UART transfers. 1042 */ 1043 msleep(50); 1044 1045 if (bdev->boot) 1046 devm_gpiod_put(&serdev->dev, bdev->boot); 1047 1048 pinctrl_select_state(bdev->pinctrl, bdev->pins_runtime); 1049 1050 /* A standalone device doesn't depends on power domain on SoC, 1051 * so mark it as no callbacks. 1052 */ 1053 pm_runtime_no_callbacks(&serdev->dev); 1054 1055 set_bit(BTMTKUART_REQUIRED_WAKEUP, &bdev->tx_state); 1056 } 1057 1058 err = hci_register_dev(hdev); 1059 if (err < 0) { 1060 dev_err(&serdev->dev, "Can't register HCI device\n"); 1061 goto err_regulator_disable; 1062 } 1063 1064 return 0; 1065 1066err_regulator_disable: 1067 if (btmtkuart_is_standalone(bdev)) 1068 regulator_disable(bdev->vcc); 1069err_clk_disable_unprepare: 1070 if (btmtkuart_is_standalone(bdev)) 1071 clk_disable_unprepare(bdev->osc); 1072err_hci_free_dev: 1073 hci_free_dev(hdev); 1074 1075 return err; 1076} 1077 1078static void btmtkuart_remove(struct serdev_device *serdev) 1079{ 1080 struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev); 1081 struct hci_dev *hdev = bdev->hdev; 1082 1083 if (btmtkuart_is_standalone(bdev)) { 1084 regulator_disable(bdev->vcc); 1085 clk_disable_unprepare(bdev->osc); 1086 } 1087 1088 hci_unregister_dev(hdev); 1089 hci_free_dev(hdev); 1090} 1091 1092static const struct btmtkuart_data mt7622_data = { 1093 .fwname = FIRMWARE_MT7622, 1094}; 1095 1096static const struct btmtkuart_data mt7663_data = { 1097 .flags = BTMTKUART_FLAG_STANDALONE_HW, 1098 .fwname = FIRMWARE_MT7663, 1099}; 1100 1101static const struct btmtkuart_data mt7668_data = { 1102 .flags = BTMTKUART_FLAG_STANDALONE_HW, 1103 .fwname = FIRMWARE_MT7668, 1104}; 1105 1106#ifdef CONFIG_OF 1107static const struct of_device_id mtk_of_match_table[] = { 1108 { .compatible = "mediatek,mt7622-bluetooth", .data = &mt7622_data}, 1109 { .compatible = "mediatek,mt7663u-bluetooth", .data = &mt7663_data}, 1110 { .compatible = "mediatek,mt7668u-bluetooth", .data = &mt7668_data}, 1111 { } 1112}; 1113MODULE_DEVICE_TABLE(of, mtk_of_match_table); 1114#endif 1115 1116static struct serdev_device_driver btmtkuart_driver = { 1117 .probe = btmtkuart_probe, 1118 .remove = btmtkuart_remove, 1119 .driver = { 1120 .name = "btmtkuart", 1121 .of_match_table = of_match_ptr(mtk_of_match_table), 1122 }, 1123}; 1124 1125module_serdev_device_driver(btmtkuart_driver); 1126 1127MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>"); 1128MODULE_DESCRIPTION("MediaTek Bluetooth Serial driver ver " VERSION); 1129MODULE_VERSION(VERSION); 1130MODULE_LICENSE("GPL"); 1131MODULE_FIRMWARE(FIRMWARE_MT7622); 1132MODULE_FIRMWARE(FIRMWARE_MT7663); 1133MODULE_FIRMWARE(FIRMWARE_MT7668); 1134