1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 A FORE Systems 200E-series driver for ATM on Linux. 4 Christophe Lizzi (lizzi@cnam.fr), October 1999-March 2003. 5 6 Based on the PCA-200E driver from Uwe Dannowski (Uwe.Dannowski@inf.tu-dresden.de). 7 8 This driver simultaneously supports PCA-200E and SBA-200E adapters 9 on i386, alpha (untested), powerpc, sparc and sparc64 architectures. 10 11*/ 12 13 14#include <linux/kernel.h> 15#include <linux/slab.h> 16#include <linux/init.h> 17#include <linux/capability.h> 18#include <linux/interrupt.h> 19#include <linux/bitops.h> 20#include <linux/pci.h> 21#include <linux/module.h> 22#include <linux/atmdev.h> 23#include <linux/sonet.h> 24#include <linux/atm_suni.h> 25#include <linux/dma-mapping.h> 26#include <linux/delay.h> 27#include <linux/firmware.h> 28#include <linux/pgtable.h> 29#include <asm/io.h> 30#include <asm/string.h> 31#include <asm/page.h> 32#include <asm/irq.h> 33#include <asm/dma.h> 34#include <asm/byteorder.h> 35#include <linux/uaccess.h> 36#include <linux/atomic.h> 37 38#ifdef CONFIG_SBUS 39#include <linux/of.h> 40#include <linux/of_device.h> 41#include <asm/idprom.h> 42#include <asm/openprom.h> 43#include <asm/oplib.h> 44#endif 45 46#if defined(CONFIG_ATM_FORE200E_USE_TASKLET) /* defer interrupt work to a tasklet */ 47#define FORE200E_USE_TASKLET 48#endif 49 50#if 0 /* enable the debugging code of the buffer supply queues */ 51#define FORE200E_BSQ_DEBUG 52#endif 53 54#if 1 /* ensure correct handling of 52-byte AAL0 SDUs expected by atmdump-like apps */ 55#define FORE200E_52BYTE_AAL0_SDU 56#endif 57 58#include "fore200e.h" 59#include "suni.h" 60 61#define FORE200E_VERSION "0.3e" 62 63#define FORE200E "fore200e: " 64 65#if 0 /* override .config */ 66#define CONFIG_ATM_FORE200E_DEBUG 1 67#endif 68#if defined(CONFIG_ATM_FORE200E_DEBUG) && (CONFIG_ATM_FORE200E_DEBUG > 0) 69#define DPRINTK(level, format, args...) do { if (CONFIG_ATM_FORE200E_DEBUG >= (level)) \ 70 printk(FORE200E format, ##args); } while (0) 71#else 72#define DPRINTK(level, format, args...) do {} while (0) 73#endif 74 75 76#define FORE200E_ALIGN(addr, alignment) \ 77 ((((unsigned long)(addr) + (alignment - 1)) & ~(alignment - 1)) - (unsigned long)(addr)) 78 79#define FORE200E_DMA_INDEX(dma_addr, type, index) ((dma_addr) + (index) * sizeof(type)) 80 81#define FORE200E_INDEX(virt_addr, type, index) (&((type *)(virt_addr))[ index ]) 82 83#define FORE200E_NEXT_ENTRY(index, modulo) (index = ((index) + 1) % (modulo)) 84 85#if 1 86#define ASSERT(expr) if (!(expr)) { \ 87 printk(FORE200E "assertion failed! %s[%d]: %s\n", \ 88 __func__, __LINE__, #expr); \ 89 panic(FORE200E "%s", __func__); \ 90 } 91#else 92#define ASSERT(expr) do {} while (0) 93#endif 94 95 96static const struct atmdev_ops fore200e_ops; 97 98static LIST_HEAD(fore200e_boards); 99 100 101MODULE_AUTHOR("Christophe Lizzi - credits to Uwe Dannowski and Heikki Vatiainen"); 102MODULE_DESCRIPTION("FORE Systems 200E-series ATM driver - version " FORE200E_VERSION); 103MODULE_SUPPORTED_DEVICE("PCA-200E, SBA-200E"); 104 105 106static const int fore200e_rx_buf_nbr[ BUFFER_SCHEME_NBR ][ BUFFER_MAGN_NBR ] = { 107 { BUFFER_S1_NBR, BUFFER_L1_NBR }, 108 { BUFFER_S2_NBR, BUFFER_L2_NBR } 109}; 110 111static const int fore200e_rx_buf_size[ BUFFER_SCHEME_NBR ][ BUFFER_MAGN_NBR ] = { 112 { BUFFER_S1_SIZE, BUFFER_L1_SIZE }, 113 { BUFFER_S2_SIZE, BUFFER_L2_SIZE } 114}; 115 116 117#if defined(CONFIG_ATM_FORE200E_DEBUG) && (CONFIG_ATM_FORE200E_DEBUG > 0) 118static const char* fore200e_traffic_class[] = { "NONE", "UBR", "CBR", "VBR", "ABR", "ANY" }; 119#endif 120 121 122#if 0 /* currently unused */ 123static int 124fore200e_fore2atm_aal(enum fore200e_aal aal) 125{ 126 switch(aal) { 127 case FORE200E_AAL0: return ATM_AAL0; 128 case FORE200E_AAL34: return ATM_AAL34; 129 case FORE200E_AAL5: return ATM_AAL5; 130 } 131 132 return -EINVAL; 133} 134#endif 135 136 137static enum fore200e_aal 138fore200e_atm2fore_aal(int aal) 139{ 140 switch(aal) { 141 case ATM_AAL0: return FORE200E_AAL0; 142 case ATM_AAL34: return FORE200E_AAL34; 143 case ATM_AAL1: 144 case ATM_AAL2: 145 case ATM_AAL5: return FORE200E_AAL5; 146 } 147 148 return -EINVAL; 149} 150 151 152static char* 153fore200e_irq_itoa(int irq) 154{ 155 static char str[8]; 156 sprintf(str, "%d", irq); 157 return str; 158} 159 160 161/* allocate and align a chunk of memory intended to hold the data behing exchanged 162 between the driver and the adapter (using streaming DVMA) */ 163 164static int 165fore200e_chunk_alloc(struct fore200e* fore200e, struct chunk* chunk, int size, int alignment, int direction) 166{ 167 unsigned long offset = 0; 168 169 if (alignment <= sizeof(int)) 170 alignment = 0; 171 172 chunk->alloc_size = size + alignment; 173 chunk->direction = direction; 174 175 chunk->alloc_addr = kzalloc(chunk->alloc_size, GFP_KERNEL); 176 if (chunk->alloc_addr == NULL) 177 return -ENOMEM; 178 179 if (alignment > 0) 180 offset = FORE200E_ALIGN(chunk->alloc_addr, alignment); 181 182 chunk->align_addr = chunk->alloc_addr + offset; 183 184 chunk->dma_addr = dma_map_single(fore200e->dev, chunk->align_addr, 185 size, direction); 186 if (dma_mapping_error(fore200e->dev, chunk->dma_addr)) { 187 kfree(chunk->alloc_addr); 188 return -ENOMEM; 189 } 190 return 0; 191} 192 193 194/* free a chunk of memory */ 195 196static void 197fore200e_chunk_free(struct fore200e* fore200e, struct chunk* chunk) 198{ 199 dma_unmap_single(fore200e->dev, chunk->dma_addr, chunk->dma_size, 200 chunk->direction); 201 kfree(chunk->alloc_addr); 202} 203 204/* 205 * Allocate a DMA consistent chunk of memory intended to act as a communication 206 * mechanism (to hold descriptors, status, queues, etc.) shared by the driver 207 * and the adapter. 208 */ 209static int 210fore200e_dma_chunk_alloc(struct fore200e *fore200e, struct chunk *chunk, 211 int size, int nbr, int alignment) 212{ 213 /* returned chunks are page-aligned */ 214 chunk->alloc_size = size * nbr; 215 chunk->alloc_addr = dma_alloc_coherent(fore200e->dev, chunk->alloc_size, 216 &chunk->dma_addr, GFP_KERNEL); 217 if (!chunk->alloc_addr) 218 return -ENOMEM; 219 chunk->align_addr = chunk->alloc_addr; 220 return 0; 221} 222 223/* 224 * Free a DMA consistent chunk of memory. 225 */ 226static void 227fore200e_dma_chunk_free(struct fore200e* fore200e, struct chunk* chunk) 228{ 229 dma_free_coherent(fore200e->dev, chunk->alloc_size, chunk->alloc_addr, 230 chunk->dma_addr); 231} 232 233static void 234fore200e_spin(int msecs) 235{ 236 unsigned long timeout = jiffies + msecs_to_jiffies(msecs); 237 while (time_before(jiffies, timeout)); 238} 239 240 241static int 242fore200e_poll(struct fore200e* fore200e, volatile u32* addr, u32 val, int msecs) 243{ 244 unsigned long timeout = jiffies + msecs_to_jiffies(msecs); 245 int ok; 246 247 mb(); 248 do { 249 if ((ok = (*addr == val)) || (*addr & STATUS_ERROR)) 250 break; 251 252 } while (time_before(jiffies, timeout)); 253 254#if 1 255 if (!ok) { 256 printk(FORE200E "cmd polling failed, got status 0x%08x, expected 0x%08x\n", 257 *addr, val); 258 } 259#endif 260 261 return ok; 262} 263 264 265static int 266fore200e_io_poll(struct fore200e* fore200e, volatile u32 __iomem *addr, u32 val, int msecs) 267{ 268 unsigned long timeout = jiffies + msecs_to_jiffies(msecs); 269 int ok; 270 271 do { 272 if ((ok = (fore200e->bus->read(addr) == val))) 273 break; 274 275 } while (time_before(jiffies, timeout)); 276 277#if 1 278 if (!ok) { 279 printk(FORE200E "I/O polling failed, got status 0x%08x, expected 0x%08x\n", 280 fore200e->bus->read(addr), val); 281 } 282#endif 283 284 return ok; 285} 286 287 288static void 289fore200e_free_rx_buf(struct fore200e* fore200e) 290{ 291 int scheme, magn, nbr; 292 struct buffer* buffer; 293 294 for (scheme = 0; scheme < BUFFER_SCHEME_NBR; scheme++) { 295 for (magn = 0; magn < BUFFER_MAGN_NBR; magn++) { 296 297 if ((buffer = fore200e->host_bsq[ scheme ][ magn ].buffer) != NULL) { 298 299 for (nbr = 0; nbr < fore200e_rx_buf_nbr[ scheme ][ magn ]; nbr++) { 300 301 struct chunk* data = &buffer[ nbr ].data; 302 303 if (data->alloc_addr != NULL) 304 fore200e_chunk_free(fore200e, data); 305 } 306 } 307 } 308 } 309} 310 311 312static void 313fore200e_uninit_bs_queue(struct fore200e* fore200e) 314{ 315 int scheme, magn; 316 317 for (scheme = 0; scheme < BUFFER_SCHEME_NBR; scheme++) { 318 for (magn = 0; magn < BUFFER_MAGN_NBR; magn++) { 319 320 struct chunk* status = &fore200e->host_bsq[ scheme ][ magn ].status; 321 struct chunk* rbd_block = &fore200e->host_bsq[ scheme ][ magn ].rbd_block; 322 323 if (status->alloc_addr) 324 fore200e_dma_chunk_free(fore200e, status); 325 326 if (rbd_block->alloc_addr) 327 fore200e_dma_chunk_free(fore200e, rbd_block); 328 } 329 } 330} 331 332 333static int 334fore200e_reset(struct fore200e* fore200e, int diag) 335{ 336 int ok; 337 338 fore200e->cp_monitor = fore200e->virt_base + FORE200E_CP_MONITOR_OFFSET; 339 340 fore200e->bus->write(BSTAT_COLD_START, &fore200e->cp_monitor->bstat); 341 342 fore200e->bus->reset(fore200e); 343 344 if (diag) { 345 ok = fore200e_io_poll(fore200e, &fore200e->cp_monitor->bstat, BSTAT_SELFTEST_OK, 1000); 346 if (ok == 0) { 347 348 printk(FORE200E "device %s self-test failed\n", fore200e->name); 349 return -ENODEV; 350 } 351 352 printk(FORE200E "device %s self-test passed\n", fore200e->name); 353 354 fore200e->state = FORE200E_STATE_RESET; 355 } 356 357 return 0; 358} 359 360 361static void 362fore200e_shutdown(struct fore200e* fore200e) 363{ 364 printk(FORE200E "removing device %s at 0x%lx, IRQ %s\n", 365 fore200e->name, fore200e->phys_base, 366 fore200e_irq_itoa(fore200e->irq)); 367 368 if (fore200e->state > FORE200E_STATE_RESET) { 369 /* first, reset the board to prevent further interrupts or data transfers */ 370 fore200e_reset(fore200e, 0); 371 } 372 373 /* then, release all allocated resources */ 374 switch(fore200e->state) { 375 376 case FORE200E_STATE_COMPLETE: 377 kfree(fore200e->stats); 378 379 fallthrough; 380 case FORE200E_STATE_IRQ: 381 free_irq(fore200e->irq, fore200e->atm_dev); 382 383 fallthrough; 384 case FORE200E_STATE_ALLOC_BUF: 385 fore200e_free_rx_buf(fore200e); 386 387 fallthrough; 388 case FORE200E_STATE_INIT_BSQ: 389 fore200e_uninit_bs_queue(fore200e); 390 391 fallthrough; 392 case FORE200E_STATE_INIT_RXQ: 393 fore200e_dma_chunk_free(fore200e, &fore200e->host_rxq.status); 394 fore200e_dma_chunk_free(fore200e, &fore200e->host_rxq.rpd); 395 396 fallthrough; 397 case FORE200E_STATE_INIT_TXQ: 398 fore200e_dma_chunk_free(fore200e, &fore200e->host_txq.status); 399 fore200e_dma_chunk_free(fore200e, &fore200e->host_txq.tpd); 400 401 fallthrough; 402 case FORE200E_STATE_INIT_CMDQ: 403 fore200e_dma_chunk_free(fore200e, &fore200e->host_cmdq.status); 404 405 fallthrough; 406 case FORE200E_STATE_INITIALIZE: 407 /* nothing to do for that state */ 408 409 case FORE200E_STATE_START_FW: 410 /* nothing to do for that state */ 411 412 case FORE200E_STATE_RESET: 413 /* nothing to do for that state */ 414 415 case FORE200E_STATE_MAP: 416 fore200e->bus->unmap(fore200e); 417 418 fallthrough; 419 case FORE200E_STATE_CONFIGURE: 420 /* nothing to do for that state */ 421 422 case FORE200E_STATE_REGISTER: 423 /* XXX shouldn't we *start* by deregistering the device? */ 424 atm_dev_deregister(fore200e->atm_dev); 425 426 case FORE200E_STATE_BLANK: 427 /* nothing to do for that state */ 428 break; 429 } 430} 431 432 433#ifdef CONFIG_PCI 434 435static u32 fore200e_pca_read(volatile u32 __iomem *addr) 436{ 437 /* on big-endian hosts, the board is configured to convert 438 the endianess of slave RAM accesses */ 439 return le32_to_cpu(readl(addr)); 440} 441 442 443static void fore200e_pca_write(u32 val, volatile u32 __iomem *addr) 444{ 445 /* on big-endian hosts, the board is configured to convert 446 the endianess of slave RAM accesses */ 447 writel(cpu_to_le32(val), addr); 448} 449 450static int 451fore200e_pca_irq_check(struct fore200e* fore200e) 452{ 453 /* this is a 1 bit register */ 454 int irq_posted = readl(fore200e->regs.pca.psr); 455 456#if defined(CONFIG_ATM_FORE200E_DEBUG) && (CONFIG_ATM_FORE200E_DEBUG == 2) 457 if (irq_posted && (readl(fore200e->regs.pca.hcr) & PCA200E_HCR_OUTFULL)) { 458 DPRINTK(2,"FIFO OUT full, device %d\n", fore200e->atm_dev->number); 459 } 460#endif 461 462 return irq_posted; 463} 464 465 466static void 467fore200e_pca_irq_ack(struct fore200e* fore200e) 468{ 469 writel(PCA200E_HCR_CLRINTR, fore200e->regs.pca.hcr); 470} 471 472 473static void 474fore200e_pca_reset(struct fore200e* fore200e) 475{ 476 writel(PCA200E_HCR_RESET, fore200e->regs.pca.hcr); 477 fore200e_spin(10); 478 writel(0, fore200e->regs.pca.hcr); 479} 480 481 482static int fore200e_pca_map(struct fore200e* fore200e) 483{ 484 DPRINTK(2, "device %s being mapped in memory\n", fore200e->name); 485 486 fore200e->virt_base = ioremap(fore200e->phys_base, PCA200E_IOSPACE_LENGTH); 487 488 if (fore200e->virt_base == NULL) { 489 printk(FORE200E "can't map device %s\n", fore200e->name); 490 return -EFAULT; 491 } 492 493 DPRINTK(1, "device %s mapped to 0x%p\n", fore200e->name, fore200e->virt_base); 494 495 /* gain access to the PCA specific registers */ 496 fore200e->regs.pca.hcr = fore200e->virt_base + PCA200E_HCR_OFFSET; 497 fore200e->regs.pca.imr = fore200e->virt_base + PCA200E_IMR_OFFSET; 498 fore200e->regs.pca.psr = fore200e->virt_base + PCA200E_PSR_OFFSET; 499 500 fore200e->state = FORE200E_STATE_MAP; 501 return 0; 502} 503 504 505static void 506fore200e_pca_unmap(struct fore200e* fore200e) 507{ 508 DPRINTK(2, "device %s being unmapped from memory\n", fore200e->name); 509 510 if (fore200e->virt_base != NULL) 511 iounmap(fore200e->virt_base); 512} 513 514 515static int fore200e_pca_configure(struct fore200e *fore200e) 516{ 517 struct pci_dev *pci_dev = to_pci_dev(fore200e->dev); 518 u8 master_ctrl, latency; 519 520 DPRINTK(2, "device %s being configured\n", fore200e->name); 521 522 if ((pci_dev->irq == 0) || (pci_dev->irq == 0xFF)) { 523 printk(FORE200E "incorrect IRQ setting - misconfigured PCI-PCI bridge?\n"); 524 return -EIO; 525 } 526 527 pci_read_config_byte(pci_dev, PCA200E_PCI_MASTER_CTRL, &master_ctrl); 528 529 master_ctrl = master_ctrl 530#if defined(__BIG_ENDIAN) 531 /* request the PCA board to convert the endianess of slave RAM accesses */ 532 | PCA200E_CTRL_CONVERT_ENDIAN 533#endif 534#if 0 535 | PCA200E_CTRL_DIS_CACHE_RD 536 | PCA200E_CTRL_DIS_WRT_INVAL 537 | PCA200E_CTRL_ENA_CONT_REQ_MODE 538 | PCA200E_CTRL_2_CACHE_WRT_INVAL 539#endif 540 | PCA200E_CTRL_LARGE_PCI_BURSTS; 541 542 pci_write_config_byte(pci_dev, PCA200E_PCI_MASTER_CTRL, master_ctrl); 543 544 /* raise latency from 32 (default) to 192, as this seems to prevent NIC 545 lockups (under heavy rx loads) due to continuous 'FIFO OUT full' condition. 546 this may impact the performances of other PCI devices on the same bus, though */ 547 latency = 192; 548 pci_write_config_byte(pci_dev, PCI_LATENCY_TIMER, latency); 549 550 fore200e->state = FORE200E_STATE_CONFIGURE; 551 return 0; 552} 553 554 555static int __init 556fore200e_pca_prom_read(struct fore200e* fore200e, struct prom_data* prom) 557{ 558 struct host_cmdq* cmdq = &fore200e->host_cmdq; 559 struct host_cmdq_entry* entry = &cmdq->host_entry[ cmdq->head ]; 560 struct prom_opcode opcode; 561 int ok; 562 u32 prom_dma; 563 564 FORE200E_NEXT_ENTRY(cmdq->head, QUEUE_SIZE_CMD); 565 566 opcode.opcode = OPCODE_GET_PROM; 567 opcode.pad = 0; 568 569 prom_dma = dma_map_single(fore200e->dev, prom, sizeof(struct prom_data), 570 DMA_FROM_DEVICE); 571 if (dma_mapping_error(fore200e->dev, prom_dma)) 572 return -ENOMEM; 573 574 fore200e->bus->write(prom_dma, &entry->cp_entry->cmd.prom_block.prom_haddr); 575 576 *entry->status = STATUS_PENDING; 577 578 fore200e->bus->write(*(u32*)&opcode, (u32 __iomem *)&entry->cp_entry->cmd.prom_block.opcode); 579 580 ok = fore200e_poll(fore200e, entry->status, STATUS_COMPLETE, 400); 581 582 *entry->status = STATUS_FREE; 583 584 dma_unmap_single(fore200e->dev, prom_dma, sizeof(struct prom_data), DMA_FROM_DEVICE); 585 586 if (ok == 0) { 587 printk(FORE200E "unable to get PROM data from device %s\n", fore200e->name); 588 return -EIO; 589 } 590 591#if defined(__BIG_ENDIAN) 592 593#define swap_here(addr) (*((u32*)(addr)) = swab32( *((u32*)(addr)) )) 594 595 /* MAC address is stored as little-endian */ 596 swap_here(&prom->mac_addr[0]); 597 swap_here(&prom->mac_addr[4]); 598#endif 599 600 return 0; 601} 602 603 604static int 605fore200e_pca_proc_read(struct fore200e* fore200e, char *page) 606{ 607 struct pci_dev *pci_dev = to_pci_dev(fore200e->dev); 608 609 return sprintf(page, " PCI bus/slot/function:\t%d/%d/%d\n", 610 pci_dev->bus->number, PCI_SLOT(pci_dev->devfn), PCI_FUNC(pci_dev->devfn)); 611} 612 613static const struct fore200e_bus fore200e_pci_ops = { 614 .model_name = "PCA-200E", 615 .proc_name = "pca200e", 616 .descr_alignment = 32, 617 .buffer_alignment = 4, 618 .status_alignment = 32, 619 .read = fore200e_pca_read, 620 .write = fore200e_pca_write, 621 .configure = fore200e_pca_configure, 622 .map = fore200e_pca_map, 623 .reset = fore200e_pca_reset, 624 .prom_read = fore200e_pca_prom_read, 625 .unmap = fore200e_pca_unmap, 626 .irq_check = fore200e_pca_irq_check, 627 .irq_ack = fore200e_pca_irq_ack, 628 .proc_read = fore200e_pca_proc_read, 629}; 630#endif /* CONFIG_PCI */ 631 632#ifdef CONFIG_SBUS 633 634static u32 fore200e_sba_read(volatile u32 __iomem *addr) 635{ 636 return sbus_readl(addr); 637} 638 639static void fore200e_sba_write(u32 val, volatile u32 __iomem *addr) 640{ 641 sbus_writel(val, addr); 642} 643 644static void fore200e_sba_irq_enable(struct fore200e *fore200e) 645{ 646 u32 hcr = fore200e->bus->read(fore200e->regs.sba.hcr) & SBA200E_HCR_STICKY; 647 fore200e->bus->write(hcr | SBA200E_HCR_INTR_ENA, fore200e->regs.sba.hcr); 648} 649 650static int fore200e_sba_irq_check(struct fore200e *fore200e) 651{ 652 return fore200e->bus->read(fore200e->regs.sba.hcr) & SBA200E_HCR_INTR_REQ; 653} 654 655static void fore200e_sba_irq_ack(struct fore200e *fore200e) 656{ 657 u32 hcr = fore200e->bus->read(fore200e->regs.sba.hcr) & SBA200E_HCR_STICKY; 658 fore200e->bus->write(hcr | SBA200E_HCR_INTR_CLR, fore200e->regs.sba.hcr); 659} 660 661static void fore200e_sba_reset(struct fore200e *fore200e) 662{ 663 fore200e->bus->write(SBA200E_HCR_RESET, fore200e->regs.sba.hcr); 664 fore200e_spin(10); 665 fore200e->bus->write(0, fore200e->regs.sba.hcr); 666} 667 668static int __init fore200e_sba_map(struct fore200e *fore200e) 669{ 670 struct platform_device *op = to_platform_device(fore200e->dev); 671 unsigned int bursts; 672 673 /* gain access to the SBA specific registers */ 674 fore200e->regs.sba.hcr = of_ioremap(&op->resource[0], 0, SBA200E_HCR_LENGTH, "SBA HCR"); 675 fore200e->regs.sba.bsr = of_ioremap(&op->resource[1], 0, SBA200E_BSR_LENGTH, "SBA BSR"); 676 fore200e->regs.sba.isr = of_ioremap(&op->resource[2], 0, SBA200E_ISR_LENGTH, "SBA ISR"); 677 fore200e->virt_base = of_ioremap(&op->resource[3], 0, SBA200E_RAM_LENGTH, "SBA RAM"); 678 679 if (!fore200e->virt_base) { 680 printk(FORE200E "unable to map RAM of device %s\n", fore200e->name); 681 return -EFAULT; 682 } 683 684 DPRINTK(1, "device %s mapped to 0x%p\n", fore200e->name, fore200e->virt_base); 685 686 fore200e->bus->write(0x02, fore200e->regs.sba.isr); /* XXX hardwired interrupt level */ 687 688 /* get the supported DVMA burst sizes */ 689 bursts = of_getintprop_default(op->dev.of_node->parent, "burst-sizes", 0x00); 690 691 if (sbus_can_dma_64bit()) 692 sbus_set_sbus64(&op->dev, bursts); 693 694 fore200e->state = FORE200E_STATE_MAP; 695 return 0; 696} 697 698static void fore200e_sba_unmap(struct fore200e *fore200e) 699{ 700 struct platform_device *op = to_platform_device(fore200e->dev); 701 702 of_iounmap(&op->resource[0], fore200e->regs.sba.hcr, SBA200E_HCR_LENGTH); 703 of_iounmap(&op->resource[1], fore200e->regs.sba.bsr, SBA200E_BSR_LENGTH); 704 of_iounmap(&op->resource[2], fore200e->regs.sba.isr, SBA200E_ISR_LENGTH); 705 of_iounmap(&op->resource[3], fore200e->virt_base, SBA200E_RAM_LENGTH); 706} 707 708static int __init fore200e_sba_configure(struct fore200e *fore200e) 709{ 710 fore200e->state = FORE200E_STATE_CONFIGURE; 711 return 0; 712} 713 714static int __init fore200e_sba_prom_read(struct fore200e *fore200e, struct prom_data *prom) 715{ 716 struct platform_device *op = to_platform_device(fore200e->dev); 717 const u8 *prop; 718 int len; 719 720 prop = of_get_property(op->dev.of_node, "madaddrlo2", &len); 721 if (!prop) 722 return -ENODEV; 723 memcpy(&prom->mac_addr[4], prop, 4); 724 725 prop = of_get_property(op->dev.of_node, "madaddrhi4", &len); 726 if (!prop) 727 return -ENODEV; 728 memcpy(&prom->mac_addr[2], prop, 4); 729 730 prom->serial_number = of_getintprop_default(op->dev.of_node, 731 "serialnumber", 0); 732 prom->hw_revision = of_getintprop_default(op->dev.of_node, 733 "promversion", 0); 734 735 return 0; 736} 737 738static int fore200e_sba_proc_read(struct fore200e *fore200e, char *page) 739{ 740 struct platform_device *op = to_platform_device(fore200e->dev); 741 const struct linux_prom_registers *regs; 742 743 regs = of_get_property(op->dev.of_node, "reg", NULL); 744 745 return sprintf(page, " SBUS slot/device:\t\t%d/'%pOFn'\n", 746 (regs ? regs->which_io : 0), op->dev.of_node); 747} 748 749static const struct fore200e_bus fore200e_sbus_ops = { 750 .model_name = "SBA-200E", 751 .proc_name = "sba200e", 752 .descr_alignment = 32, 753 .buffer_alignment = 64, 754 .status_alignment = 32, 755 .read = fore200e_sba_read, 756 .write = fore200e_sba_write, 757 .configure = fore200e_sba_configure, 758 .map = fore200e_sba_map, 759 .reset = fore200e_sba_reset, 760 .prom_read = fore200e_sba_prom_read, 761 .unmap = fore200e_sba_unmap, 762 .irq_enable = fore200e_sba_irq_enable, 763 .irq_check = fore200e_sba_irq_check, 764 .irq_ack = fore200e_sba_irq_ack, 765 .proc_read = fore200e_sba_proc_read, 766}; 767#endif /* CONFIG_SBUS */ 768 769static void 770fore200e_tx_irq(struct fore200e* fore200e) 771{ 772 struct host_txq* txq = &fore200e->host_txq; 773 struct host_txq_entry* entry; 774 struct atm_vcc* vcc; 775 struct fore200e_vc_map* vc_map; 776 777 if (fore200e->host_txq.txing == 0) 778 return; 779 780 for (;;) { 781 782 entry = &txq->host_entry[ txq->tail ]; 783 784 if ((*entry->status & STATUS_COMPLETE) == 0) { 785 break; 786 } 787 788 DPRINTK(3, "TX COMPLETED: entry = %p [tail = %d], vc_map = %p, skb = %p\n", 789 entry, txq->tail, entry->vc_map, entry->skb); 790 791 /* free copy of misaligned data */ 792 kfree(entry->data); 793 794 /* remove DMA mapping */ 795 dma_unmap_single(fore200e->dev, entry->tpd->tsd[ 0 ].buffer, entry->tpd->tsd[ 0 ].length, 796 DMA_TO_DEVICE); 797 798 vc_map = entry->vc_map; 799 800 /* vcc closed since the time the entry was submitted for tx? */ 801 if ((vc_map->vcc == NULL) || 802 (test_bit(ATM_VF_READY, &vc_map->vcc->flags) == 0)) { 803 804 DPRINTK(1, "no ready vcc found for PDU sent on device %d\n", 805 fore200e->atm_dev->number); 806 807 dev_kfree_skb_any(entry->skb); 808 } 809 else { 810 ASSERT(vc_map->vcc); 811 812 /* vcc closed then immediately re-opened? */ 813 if (vc_map->incarn != entry->incarn) { 814 815 /* when a vcc is closed, some PDUs may be still pending in the tx queue. 816 if the same vcc is immediately re-opened, those pending PDUs must 817 not be popped after the completion of their emission, as they refer 818 to the prior incarnation of that vcc. otherwise, sk_atm(vcc)->sk_wmem_alloc 819 would be decremented by the size of the (unrelated) skb, possibly 820 leading to a negative sk->sk_wmem_alloc count, ultimately freezing the vcc. 821 we thus bind the tx entry to the current incarnation of the vcc 822 when the entry is submitted for tx. When the tx later completes, 823 if the incarnation number of the tx entry does not match the one 824 of the vcc, then this implies that the vcc has been closed then re-opened. 825 we thus just drop the skb here. */ 826 827 DPRINTK(1, "vcc closed-then-re-opened; dropping PDU sent on device %d\n", 828 fore200e->atm_dev->number); 829 830 dev_kfree_skb_any(entry->skb); 831 } 832 else { 833 vcc = vc_map->vcc; 834 ASSERT(vcc); 835 836 /* notify tx completion */ 837 if (vcc->pop) { 838 vcc->pop(vcc, entry->skb); 839 } 840 else { 841 dev_kfree_skb_any(entry->skb); 842 } 843 844 /* check error condition */ 845 if (*entry->status & STATUS_ERROR) 846 atomic_inc(&vcc->stats->tx_err); 847 else 848 atomic_inc(&vcc->stats->tx); 849 } 850 } 851 852 *entry->status = STATUS_FREE; 853 854 fore200e->host_txq.txing--; 855 856 FORE200E_NEXT_ENTRY(txq->tail, QUEUE_SIZE_TX); 857 } 858} 859 860 861#ifdef FORE200E_BSQ_DEBUG 862int bsq_audit(int where, struct host_bsq* bsq, int scheme, int magn) 863{ 864 struct buffer* buffer; 865 int count = 0; 866 867 buffer = bsq->freebuf; 868 while (buffer) { 869 870 if (buffer->supplied) { 871 printk(FORE200E "bsq_audit(%d): queue %d.%d, buffer %ld supplied but in free list!\n", 872 where, scheme, magn, buffer->index); 873 } 874 875 if (buffer->magn != magn) { 876 printk(FORE200E "bsq_audit(%d): queue %d.%d, buffer %ld, unexpected magn = %d\n", 877 where, scheme, magn, buffer->index, buffer->magn); 878 } 879 880 if (buffer->scheme != scheme) { 881 printk(FORE200E "bsq_audit(%d): queue %d.%d, buffer %ld, unexpected scheme = %d\n", 882 where, scheme, magn, buffer->index, buffer->scheme); 883 } 884 885 if ((buffer->index < 0) || (buffer->index >= fore200e_rx_buf_nbr[ scheme ][ magn ])) { 886 printk(FORE200E "bsq_audit(%d): queue %d.%d, out of range buffer index = %ld !\n", 887 where, scheme, magn, buffer->index); 888 } 889 890 count++; 891 buffer = buffer->next; 892 } 893 894 if (count != bsq->freebuf_count) { 895 printk(FORE200E "bsq_audit(%d): queue %d.%d, %d bufs in free list, but freebuf_count = %d\n", 896 where, scheme, magn, count, bsq->freebuf_count); 897 } 898 return 0; 899} 900#endif 901 902 903static void 904fore200e_supply(struct fore200e* fore200e) 905{ 906 int scheme, magn, i; 907 908 struct host_bsq* bsq; 909 struct host_bsq_entry* entry; 910 struct buffer* buffer; 911 912 for (scheme = 0; scheme < BUFFER_SCHEME_NBR; scheme++) { 913 for (magn = 0; magn < BUFFER_MAGN_NBR; magn++) { 914 915 bsq = &fore200e->host_bsq[ scheme ][ magn ]; 916 917#ifdef FORE200E_BSQ_DEBUG 918 bsq_audit(1, bsq, scheme, magn); 919#endif 920 while (bsq->freebuf_count >= RBD_BLK_SIZE) { 921 922 DPRINTK(2, "supplying %d rx buffers to queue %d / %d, freebuf_count = %d\n", 923 RBD_BLK_SIZE, scheme, magn, bsq->freebuf_count); 924 925 entry = &bsq->host_entry[ bsq->head ]; 926 927 for (i = 0; i < RBD_BLK_SIZE; i++) { 928 929 /* take the first buffer in the free buffer list */ 930 buffer = bsq->freebuf; 931 if (!buffer) { 932 printk(FORE200E "no more free bufs in queue %d.%d, but freebuf_count = %d\n", 933 scheme, magn, bsq->freebuf_count); 934 return; 935 } 936 bsq->freebuf = buffer->next; 937 938#ifdef FORE200E_BSQ_DEBUG 939 if (buffer->supplied) 940 printk(FORE200E "queue %d.%d, buffer %lu already supplied\n", 941 scheme, magn, buffer->index); 942 buffer->supplied = 1; 943#endif 944 entry->rbd_block->rbd[ i ].buffer_haddr = buffer->data.dma_addr; 945 entry->rbd_block->rbd[ i ].handle = FORE200E_BUF2HDL(buffer); 946 } 947 948 FORE200E_NEXT_ENTRY(bsq->head, QUEUE_SIZE_BS); 949 950 /* decrease accordingly the number of free rx buffers */ 951 bsq->freebuf_count -= RBD_BLK_SIZE; 952 953 *entry->status = STATUS_PENDING; 954 fore200e->bus->write(entry->rbd_block_dma, &entry->cp_entry->rbd_block_haddr); 955 } 956 } 957 } 958} 959 960 961static int 962fore200e_push_rpd(struct fore200e* fore200e, struct atm_vcc* vcc, struct rpd* rpd) 963{ 964 struct sk_buff* skb; 965 struct buffer* buffer; 966 struct fore200e_vcc* fore200e_vcc; 967 int i, pdu_len = 0; 968#ifdef FORE200E_52BYTE_AAL0_SDU 969 u32 cell_header = 0; 970#endif 971 972 ASSERT(vcc); 973 974 fore200e_vcc = FORE200E_VCC(vcc); 975 ASSERT(fore200e_vcc); 976 977#ifdef FORE200E_52BYTE_AAL0_SDU 978 if ((vcc->qos.aal == ATM_AAL0) && (vcc->qos.rxtp.max_sdu == ATM_AAL0_SDU)) { 979 980 cell_header = (rpd->atm_header.gfc << ATM_HDR_GFC_SHIFT) | 981 (rpd->atm_header.vpi << ATM_HDR_VPI_SHIFT) | 982 (rpd->atm_header.vci << ATM_HDR_VCI_SHIFT) | 983 (rpd->atm_header.plt << ATM_HDR_PTI_SHIFT) | 984 rpd->atm_header.clp; 985 pdu_len = 4; 986 } 987#endif 988 989 /* compute total PDU length */ 990 for (i = 0; i < rpd->nseg; i++) 991 pdu_len += rpd->rsd[ i ].length; 992 993 skb = alloc_skb(pdu_len, GFP_ATOMIC); 994 if (skb == NULL) { 995 DPRINTK(2, "unable to alloc new skb, rx PDU length = %d\n", pdu_len); 996 997 atomic_inc(&vcc->stats->rx_drop); 998 return -ENOMEM; 999 } 1000 1001 __net_timestamp(skb); 1002 1003#ifdef FORE200E_52BYTE_AAL0_SDU 1004 if (cell_header) { 1005 *((u32*)skb_put(skb, 4)) = cell_header; 1006 } 1007#endif 1008 1009 /* reassemble segments */ 1010 for (i = 0; i < rpd->nseg; i++) { 1011 1012 /* rebuild rx buffer address from rsd handle */ 1013 buffer = FORE200E_HDL2BUF(rpd->rsd[ i ].handle); 1014 1015 /* Make device DMA transfer visible to CPU. */ 1016 dma_sync_single_for_cpu(fore200e->dev, buffer->data.dma_addr, 1017 rpd->rsd[i].length, DMA_FROM_DEVICE); 1018 1019 skb_put_data(skb, buffer->data.align_addr, rpd->rsd[i].length); 1020 1021 /* Now let the device get at it again. */ 1022 dma_sync_single_for_device(fore200e->dev, buffer->data.dma_addr, 1023 rpd->rsd[i].length, DMA_FROM_DEVICE); 1024 } 1025 1026 DPRINTK(3, "rx skb: len = %d, truesize = %d\n", skb->len, skb->truesize); 1027 1028 if (pdu_len < fore200e_vcc->rx_min_pdu) 1029 fore200e_vcc->rx_min_pdu = pdu_len; 1030 if (pdu_len > fore200e_vcc->rx_max_pdu) 1031 fore200e_vcc->rx_max_pdu = pdu_len; 1032 fore200e_vcc->rx_pdu++; 1033 1034 /* push PDU */ 1035 if (atm_charge(vcc, skb->truesize) == 0) { 1036 1037 DPRINTK(2, "receive buffers saturated for %d.%d.%d - PDU dropped\n", 1038 vcc->itf, vcc->vpi, vcc->vci); 1039 1040 dev_kfree_skb_any(skb); 1041 1042 atomic_inc(&vcc->stats->rx_drop); 1043 return -ENOMEM; 1044 } 1045 1046 vcc->push(vcc, skb); 1047 atomic_inc(&vcc->stats->rx); 1048 1049 return 0; 1050} 1051 1052 1053static void 1054fore200e_collect_rpd(struct fore200e* fore200e, struct rpd* rpd) 1055{ 1056 struct host_bsq* bsq; 1057 struct buffer* buffer; 1058 int i; 1059 1060 for (i = 0; i < rpd->nseg; i++) { 1061 1062 /* rebuild rx buffer address from rsd handle */ 1063 buffer = FORE200E_HDL2BUF(rpd->rsd[ i ].handle); 1064 1065 bsq = &fore200e->host_bsq[ buffer->scheme ][ buffer->magn ]; 1066 1067#ifdef FORE200E_BSQ_DEBUG 1068 bsq_audit(2, bsq, buffer->scheme, buffer->magn); 1069 1070 if (buffer->supplied == 0) 1071 printk(FORE200E "queue %d.%d, buffer %ld was not supplied\n", 1072 buffer->scheme, buffer->magn, buffer->index); 1073 buffer->supplied = 0; 1074#endif 1075 1076 /* re-insert the buffer into the free buffer list */ 1077 buffer->next = bsq->freebuf; 1078 bsq->freebuf = buffer; 1079 1080 /* then increment the number of free rx buffers */ 1081 bsq->freebuf_count++; 1082 } 1083} 1084 1085 1086static void 1087fore200e_rx_irq(struct fore200e* fore200e) 1088{ 1089 struct host_rxq* rxq = &fore200e->host_rxq; 1090 struct host_rxq_entry* entry; 1091 struct atm_vcc* vcc; 1092 struct fore200e_vc_map* vc_map; 1093 1094 for (;;) { 1095 1096 entry = &rxq->host_entry[ rxq->head ]; 1097 1098 /* no more received PDUs */ 1099 if ((*entry->status & STATUS_COMPLETE) == 0) 1100 break; 1101 1102 vc_map = FORE200E_VC_MAP(fore200e, entry->rpd->atm_header.vpi, entry->rpd->atm_header.vci); 1103 1104 if ((vc_map->vcc == NULL) || 1105 (test_bit(ATM_VF_READY, &vc_map->vcc->flags) == 0)) { 1106 1107 DPRINTK(1, "no ready VC found for PDU received on %d.%d.%d\n", 1108 fore200e->atm_dev->number, 1109 entry->rpd->atm_header.vpi, entry->rpd->atm_header.vci); 1110 } 1111 else { 1112 vcc = vc_map->vcc; 1113 ASSERT(vcc); 1114 1115 if ((*entry->status & STATUS_ERROR) == 0) { 1116 1117 fore200e_push_rpd(fore200e, vcc, entry->rpd); 1118 } 1119 else { 1120 DPRINTK(2, "damaged PDU on %d.%d.%d\n", 1121 fore200e->atm_dev->number, 1122 entry->rpd->atm_header.vpi, entry->rpd->atm_header.vci); 1123 atomic_inc(&vcc->stats->rx_err); 1124 } 1125 } 1126 1127 FORE200E_NEXT_ENTRY(rxq->head, QUEUE_SIZE_RX); 1128 1129 fore200e_collect_rpd(fore200e, entry->rpd); 1130 1131 /* rewrite the rpd address to ack the received PDU */ 1132 fore200e->bus->write(entry->rpd_dma, &entry->cp_entry->rpd_haddr); 1133 *entry->status = STATUS_FREE; 1134 1135 fore200e_supply(fore200e); 1136 } 1137} 1138 1139 1140#ifndef FORE200E_USE_TASKLET 1141static void 1142fore200e_irq(struct fore200e* fore200e) 1143{ 1144 unsigned long flags; 1145 1146 spin_lock_irqsave(&fore200e->q_lock, flags); 1147 fore200e_rx_irq(fore200e); 1148 spin_unlock_irqrestore(&fore200e->q_lock, flags); 1149 1150 spin_lock_irqsave(&fore200e->q_lock, flags); 1151 fore200e_tx_irq(fore200e); 1152 spin_unlock_irqrestore(&fore200e->q_lock, flags); 1153} 1154#endif 1155 1156 1157static irqreturn_t 1158fore200e_interrupt(int irq, void* dev) 1159{ 1160 struct fore200e* fore200e = FORE200E_DEV((struct atm_dev*)dev); 1161 1162 if (fore200e->bus->irq_check(fore200e) == 0) { 1163 1164 DPRINTK(3, "interrupt NOT triggered by device %d\n", fore200e->atm_dev->number); 1165 return IRQ_NONE; 1166 } 1167 DPRINTK(3, "interrupt triggered by device %d\n", fore200e->atm_dev->number); 1168 1169#ifdef FORE200E_USE_TASKLET 1170 tasklet_schedule(&fore200e->tx_tasklet); 1171 tasklet_schedule(&fore200e->rx_tasklet); 1172#else 1173 fore200e_irq(fore200e); 1174#endif 1175 1176 fore200e->bus->irq_ack(fore200e); 1177 return IRQ_HANDLED; 1178} 1179 1180 1181#ifdef FORE200E_USE_TASKLET 1182static void 1183fore200e_tx_tasklet(unsigned long data) 1184{ 1185 struct fore200e* fore200e = (struct fore200e*) data; 1186 unsigned long flags; 1187 1188 DPRINTK(3, "tx tasklet scheduled for device %d\n", fore200e->atm_dev->number); 1189 1190 spin_lock_irqsave(&fore200e->q_lock, flags); 1191 fore200e_tx_irq(fore200e); 1192 spin_unlock_irqrestore(&fore200e->q_lock, flags); 1193} 1194 1195 1196static void 1197fore200e_rx_tasklet(unsigned long data) 1198{ 1199 struct fore200e* fore200e = (struct fore200e*) data; 1200 unsigned long flags; 1201 1202 DPRINTK(3, "rx tasklet scheduled for device %d\n", fore200e->atm_dev->number); 1203 1204 spin_lock_irqsave(&fore200e->q_lock, flags); 1205 fore200e_rx_irq((struct fore200e*) data); 1206 spin_unlock_irqrestore(&fore200e->q_lock, flags); 1207} 1208#endif 1209 1210 1211static int 1212fore200e_select_scheme(struct atm_vcc* vcc) 1213{ 1214 /* fairly balance the VCs over (identical) buffer schemes */ 1215 int scheme = vcc->vci % 2 ? BUFFER_SCHEME_ONE : BUFFER_SCHEME_TWO; 1216 1217 DPRINTK(1, "VC %d.%d.%d uses buffer scheme %d\n", 1218 vcc->itf, vcc->vpi, vcc->vci, scheme); 1219 1220 return scheme; 1221} 1222 1223 1224static int 1225fore200e_activate_vcin(struct fore200e* fore200e, int activate, struct atm_vcc* vcc, int mtu) 1226{ 1227 struct host_cmdq* cmdq = &fore200e->host_cmdq; 1228 struct host_cmdq_entry* entry = &cmdq->host_entry[ cmdq->head ]; 1229 struct activate_opcode activ_opcode; 1230 struct deactivate_opcode deactiv_opcode; 1231 struct vpvc vpvc; 1232 int ok; 1233 enum fore200e_aal aal = fore200e_atm2fore_aal(vcc->qos.aal); 1234 1235 FORE200E_NEXT_ENTRY(cmdq->head, QUEUE_SIZE_CMD); 1236 1237 if (activate) { 1238 FORE200E_VCC(vcc)->scheme = fore200e_select_scheme(vcc); 1239 1240 activ_opcode.opcode = OPCODE_ACTIVATE_VCIN; 1241 activ_opcode.aal = aal; 1242 activ_opcode.scheme = FORE200E_VCC(vcc)->scheme; 1243 activ_opcode.pad = 0; 1244 } 1245 else { 1246 deactiv_opcode.opcode = OPCODE_DEACTIVATE_VCIN; 1247 deactiv_opcode.pad = 0; 1248 } 1249 1250 vpvc.vci = vcc->vci; 1251 vpvc.vpi = vcc->vpi; 1252 1253 *entry->status = STATUS_PENDING; 1254 1255 if (activate) { 1256 1257#ifdef FORE200E_52BYTE_AAL0_SDU 1258 mtu = 48; 1259#endif 1260 /* the MTU is not used by the cp, except in the case of AAL0 */ 1261 fore200e->bus->write(mtu, &entry->cp_entry->cmd.activate_block.mtu); 1262 fore200e->bus->write(*(u32*)&vpvc, (u32 __iomem *)&entry->cp_entry->cmd.activate_block.vpvc); 1263 fore200e->bus->write(*(u32*)&activ_opcode, (u32 __iomem *)&entry->cp_entry->cmd.activate_block.opcode); 1264 } 1265 else { 1266 fore200e->bus->write(*(u32*)&vpvc, (u32 __iomem *)&entry->cp_entry->cmd.deactivate_block.vpvc); 1267 fore200e->bus->write(*(u32*)&deactiv_opcode, (u32 __iomem *)&entry->cp_entry->cmd.deactivate_block.opcode); 1268 } 1269 1270 ok = fore200e_poll(fore200e, entry->status, STATUS_COMPLETE, 400); 1271 1272 *entry->status = STATUS_FREE; 1273 1274 if (ok == 0) { 1275 printk(FORE200E "unable to %s VC %d.%d.%d\n", 1276 activate ? "open" : "close", vcc->itf, vcc->vpi, vcc->vci); 1277 return -EIO; 1278 } 1279 1280 DPRINTK(1, "VC %d.%d.%d %sed\n", vcc->itf, vcc->vpi, vcc->vci, 1281 activate ? "open" : "clos"); 1282 1283 return 0; 1284} 1285 1286 1287#define FORE200E_MAX_BACK2BACK_CELLS 255 /* XXX depends on CDVT */ 1288 1289static void 1290fore200e_rate_ctrl(struct atm_qos* qos, struct tpd_rate* rate) 1291{ 1292 if (qos->txtp.max_pcr < ATM_OC3_PCR) { 1293 1294 /* compute the data cells to idle cells ratio from the tx PCR */ 1295 rate->data_cells = qos->txtp.max_pcr * FORE200E_MAX_BACK2BACK_CELLS / ATM_OC3_PCR; 1296 rate->idle_cells = FORE200E_MAX_BACK2BACK_CELLS - rate->data_cells; 1297 } 1298 else { 1299 /* disable rate control */ 1300 rate->data_cells = rate->idle_cells = 0; 1301 } 1302} 1303 1304 1305static int 1306fore200e_open(struct atm_vcc *vcc) 1307{ 1308 struct fore200e* fore200e = FORE200E_DEV(vcc->dev); 1309 struct fore200e_vcc* fore200e_vcc; 1310 struct fore200e_vc_map* vc_map; 1311 unsigned long flags; 1312 int vci = vcc->vci; 1313 short vpi = vcc->vpi; 1314 1315 ASSERT((vpi >= 0) && (vpi < 1<<FORE200E_VPI_BITS)); 1316 ASSERT((vci >= 0) && (vci < 1<<FORE200E_VCI_BITS)); 1317 1318 spin_lock_irqsave(&fore200e->q_lock, flags); 1319 1320 vc_map = FORE200E_VC_MAP(fore200e, vpi, vci); 1321 if (vc_map->vcc) { 1322 1323 spin_unlock_irqrestore(&fore200e->q_lock, flags); 1324 1325 printk(FORE200E "VC %d.%d.%d already in use\n", 1326 fore200e->atm_dev->number, vpi, vci); 1327 1328 return -EINVAL; 1329 } 1330 1331 vc_map->vcc = vcc; 1332 1333 spin_unlock_irqrestore(&fore200e->q_lock, flags); 1334 1335 fore200e_vcc = kzalloc(sizeof(struct fore200e_vcc), GFP_ATOMIC); 1336 if (fore200e_vcc == NULL) { 1337 vc_map->vcc = NULL; 1338 return -ENOMEM; 1339 } 1340 1341 DPRINTK(2, "opening %d.%d.%d:%d QoS = (tx: cl=%s, pcr=%d-%d, cdv=%d, max_sdu=%d; " 1342 "rx: cl=%s, pcr=%d-%d, cdv=%d, max_sdu=%d)\n", 1343 vcc->itf, vcc->vpi, vcc->vci, fore200e_atm2fore_aal(vcc->qos.aal), 1344 fore200e_traffic_class[ vcc->qos.txtp.traffic_class ], 1345 vcc->qos.txtp.min_pcr, vcc->qos.txtp.max_pcr, vcc->qos.txtp.max_cdv, vcc->qos.txtp.max_sdu, 1346 fore200e_traffic_class[ vcc->qos.rxtp.traffic_class ], 1347 vcc->qos.rxtp.min_pcr, vcc->qos.rxtp.max_pcr, vcc->qos.rxtp.max_cdv, vcc->qos.rxtp.max_sdu); 1348 1349 /* pseudo-CBR bandwidth requested? */ 1350 if ((vcc->qos.txtp.traffic_class == ATM_CBR) && (vcc->qos.txtp.max_pcr > 0)) { 1351 1352 mutex_lock(&fore200e->rate_mtx); 1353 if (fore200e->available_cell_rate < vcc->qos.txtp.max_pcr) { 1354 mutex_unlock(&fore200e->rate_mtx); 1355 1356 kfree(fore200e_vcc); 1357 vc_map->vcc = NULL; 1358 return -EAGAIN; 1359 } 1360 1361 /* reserve bandwidth */ 1362 fore200e->available_cell_rate -= vcc->qos.txtp.max_pcr; 1363 mutex_unlock(&fore200e->rate_mtx); 1364 } 1365 1366 vcc->itf = vcc->dev->number; 1367 1368 set_bit(ATM_VF_PARTIAL,&vcc->flags); 1369 set_bit(ATM_VF_ADDR, &vcc->flags); 1370 1371 vcc->dev_data = fore200e_vcc; 1372 1373 if (fore200e_activate_vcin(fore200e, 1, vcc, vcc->qos.rxtp.max_sdu) < 0) { 1374 1375 vc_map->vcc = NULL; 1376 1377 clear_bit(ATM_VF_ADDR, &vcc->flags); 1378 clear_bit(ATM_VF_PARTIAL,&vcc->flags); 1379 1380 vcc->dev_data = NULL; 1381 1382 fore200e->available_cell_rate += vcc->qos.txtp.max_pcr; 1383 1384 kfree(fore200e_vcc); 1385 return -EINVAL; 1386 } 1387 1388 /* compute rate control parameters */ 1389 if ((vcc->qos.txtp.traffic_class == ATM_CBR) && (vcc->qos.txtp.max_pcr > 0)) { 1390 1391 fore200e_rate_ctrl(&vcc->qos, &fore200e_vcc->rate); 1392 set_bit(ATM_VF_HASQOS, &vcc->flags); 1393 1394 DPRINTK(3, "tx on %d.%d.%d:%d, tx PCR = %d, rx PCR = %d, data_cells = %u, idle_cells = %u\n", 1395 vcc->itf, vcc->vpi, vcc->vci, fore200e_atm2fore_aal(vcc->qos.aal), 1396 vcc->qos.txtp.max_pcr, vcc->qos.rxtp.max_pcr, 1397 fore200e_vcc->rate.data_cells, fore200e_vcc->rate.idle_cells); 1398 } 1399 1400 fore200e_vcc->tx_min_pdu = fore200e_vcc->rx_min_pdu = MAX_PDU_SIZE + 1; 1401 fore200e_vcc->tx_max_pdu = fore200e_vcc->rx_max_pdu = 0; 1402 fore200e_vcc->tx_pdu = fore200e_vcc->rx_pdu = 0; 1403 1404 /* new incarnation of the vcc */ 1405 vc_map->incarn = ++fore200e->incarn_count; 1406 1407 /* VC unusable before this flag is set */ 1408 set_bit(ATM_VF_READY, &vcc->flags); 1409 1410 return 0; 1411} 1412 1413 1414static void 1415fore200e_close(struct atm_vcc* vcc) 1416{ 1417 struct fore200e_vcc* fore200e_vcc; 1418 struct fore200e* fore200e; 1419 struct fore200e_vc_map* vc_map; 1420 unsigned long flags; 1421 1422 ASSERT(vcc); 1423 fore200e = FORE200E_DEV(vcc->dev); 1424 1425 ASSERT((vcc->vpi >= 0) && (vcc->vpi < 1<<FORE200E_VPI_BITS)); 1426 ASSERT((vcc->vci >= 0) && (vcc->vci < 1<<FORE200E_VCI_BITS)); 1427 1428 DPRINTK(2, "closing %d.%d.%d:%d\n", vcc->itf, vcc->vpi, vcc->vci, fore200e_atm2fore_aal(vcc->qos.aal)); 1429 1430 clear_bit(ATM_VF_READY, &vcc->flags); 1431 1432 fore200e_activate_vcin(fore200e, 0, vcc, 0); 1433 1434 spin_lock_irqsave(&fore200e->q_lock, flags); 1435 1436 vc_map = FORE200E_VC_MAP(fore200e, vcc->vpi, vcc->vci); 1437 1438 /* the vc is no longer considered as "in use" by fore200e_open() */ 1439 vc_map->vcc = NULL; 1440 1441 vcc->itf = vcc->vci = vcc->vpi = 0; 1442 1443 fore200e_vcc = FORE200E_VCC(vcc); 1444 vcc->dev_data = NULL; 1445 1446 spin_unlock_irqrestore(&fore200e->q_lock, flags); 1447 1448 /* release reserved bandwidth, if any */ 1449 if ((vcc->qos.txtp.traffic_class == ATM_CBR) && (vcc->qos.txtp.max_pcr > 0)) { 1450 1451 mutex_lock(&fore200e->rate_mtx); 1452 fore200e->available_cell_rate += vcc->qos.txtp.max_pcr; 1453 mutex_unlock(&fore200e->rate_mtx); 1454 1455 clear_bit(ATM_VF_HASQOS, &vcc->flags); 1456 } 1457 1458 clear_bit(ATM_VF_ADDR, &vcc->flags); 1459 clear_bit(ATM_VF_PARTIAL,&vcc->flags); 1460 1461 ASSERT(fore200e_vcc); 1462 kfree(fore200e_vcc); 1463} 1464 1465 1466static int 1467fore200e_send(struct atm_vcc *vcc, struct sk_buff *skb) 1468{ 1469 struct fore200e* fore200e; 1470 struct fore200e_vcc* fore200e_vcc; 1471 struct fore200e_vc_map* vc_map; 1472 struct host_txq* txq; 1473 struct host_txq_entry* entry; 1474 struct tpd* tpd; 1475 struct tpd_haddr tpd_haddr; 1476 int retry = CONFIG_ATM_FORE200E_TX_RETRY; 1477 int tx_copy = 0; 1478 int tx_len = skb->len; 1479 u32* cell_header = NULL; 1480 unsigned char* skb_data; 1481 int skb_len; 1482 unsigned char* data; 1483 unsigned long flags; 1484 1485 if (!vcc) 1486 return -EINVAL; 1487 1488 fore200e = FORE200E_DEV(vcc->dev); 1489 fore200e_vcc = FORE200E_VCC(vcc); 1490 1491 if (!fore200e) 1492 return -EINVAL; 1493 1494 txq = &fore200e->host_txq; 1495 if (!fore200e_vcc) 1496 return -EINVAL; 1497 1498 if (!test_bit(ATM_VF_READY, &vcc->flags)) { 1499 DPRINTK(1, "VC %d.%d.%d not ready for tx\n", vcc->itf, vcc->vpi, vcc->vpi); 1500 dev_kfree_skb_any(skb); 1501 return -EINVAL; 1502 } 1503 1504#ifdef FORE200E_52BYTE_AAL0_SDU 1505 if ((vcc->qos.aal == ATM_AAL0) && (vcc->qos.txtp.max_sdu == ATM_AAL0_SDU)) { 1506 cell_header = (u32*) skb->data; 1507 skb_data = skb->data + 4; /* skip 4-byte cell header */ 1508 skb_len = tx_len = skb->len - 4; 1509 1510 DPRINTK(3, "user-supplied cell header = 0x%08x\n", *cell_header); 1511 } 1512 else 1513#endif 1514 { 1515 skb_data = skb->data; 1516 skb_len = skb->len; 1517 } 1518 1519 if (((unsigned long)skb_data) & 0x3) { 1520 1521 DPRINTK(2, "misaligned tx PDU on device %s\n", fore200e->name); 1522 tx_copy = 1; 1523 tx_len = skb_len; 1524 } 1525 1526 if ((vcc->qos.aal == ATM_AAL0) && (skb_len % ATM_CELL_PAYLOAD)) { 1527 1528 /* this simply NUKES the PCA board */ 1529 DPRINTK(2, "incomplete tx AAL0 PDU on device %s\n", fore200e->name); 1530 tx_copy = 1; 1531 tx_len = ((skb_len / ATM_CELL_PAYLOAD) + 1) * ATM_CELL_PAYLOAD; 1532 } 1533 1534 if (tx_copy) { 1535 data = kmalloc(tx_len, GFP_ATOMIC); 1536 if (data == NULL) { 1537 if (vcc->pop) { 1538 vcc->pop(vcc, skb); 1539 } 1540 else { 1541 dev_kfree_skb_any(skb); 1542 } 1543 return -ENOMEM; 1544 } 1545 1546 memcpy(data, skb_data, skb_len); 1547 if (skb_len < tx_len) 1548 memset(data + skb_len, 0x00, tx_len - skb_len); 1549 } 1550 else { 1551 data = skb_data; 1552 } 1553 1554 vc_map = FORE200E_VC_MAP(fore200e, vcc->vpi, vcc->vci); 1555 ASSERT(vc_map->vcc == vcc); 1556 1557 retry_here: 1558 1559 spin_lock_irqsave(&fore200e->q_lock, flags); 1560 1561 entry = &txq->host_entry[ txq->head ]; 1562 1563 if ((*entry->status != STATUS_FREE) || (txq->txing >= QUEUE_SIZE_TX - 2)) { 1564 1565 /* try to free completed tx queue entries */ 1566 fore200e_tx_irq(fore200e); 1567 1568 if (*entry->status != STATUS_FREE) { 1569 1570 spin_unlock_irqrestore(&fore200e->q_lock, flags); 1571 1572 /* retry once again? */ 1573 if (--retry > 0) { 1574 udelay(50); 1575 goto retry_here; 1576 } 1577 1578 atomic_inc(&vcc->stats->tx_err); 1579 1580 fore200e->tx_sat++; 1581 DPRINTK(2, "tx queue of device %s is saturated, PDU dropped - heartbeat is %08x\n", 1582 fore200e->name, fore200e->cp_queues->heartbeat); 1583 if (vcc->pop) { 1584 vcc->pop(vcc, skb); 1585 } 1586 else { 1587 dev_kfree_skb_any(skb); 1588 } 1589 1590 if (tx_copy) 1591 kfree(data); 1592 1593 return -ENOBUFS; 1594 } 1595 } 1596 1597 entry->incarn = vc_map->incarn; 1598 entry->vc_map = vc_map; 1599 entry->skb = skb; 1600 entry->data = tx_copy ? data : NULL; 1601 1602 tpd = entry->tpd; 1603 tpd->tsd[ 0 ].buffer = dma_map_single(fore200e->dev, data, tx_len, 1604 DMA_TO_DEVICE); 1605 if (dma_mapping_error(fore200e->dev, tpd->tsd[0].buffer)) { 1606 if (tx_copy) 1607 kfree(data); 1608 spin_unlock_irqrestore(&fore200e->q_lock, flags); 1609 return -ENOMEM; 1610 } 1611 tpd->tsd[ 0 ].length = tx_len; 1612 1613 FORE200E_NEXT_ENTRY(txq->head, QUEUE_SIZE_TX); 1614 txq->txing++; 1615 1616 /* The dma_map call above implies a dma_sync so the device can use it, 1617 * thus no explicit dma_sync call is necessary here. 1618 */ 1619 1620 DPRINTK(3, "tx on %d.%d.%d:%d, len = %u (%u)\n", 1621 vcc->itf, vcc->vpi, vcc->vci, fore200e_atm2fore_aal(vcc->qos.aal), 1622 tpd->tsd[0].length, skb_len); 1623 1624 if (skb_len < fore200e_vcc->tx_min_pdu) 1625 fore200e_vcc->tx_min_pdu = skb_len; 1626 if (skb_len > fore200e_vcc->tx_max_pdu) 1627 fore200e_vcc->tx_max_pdu = skb_len; 1628 fore200e_vcc->tx_pdu++; 1629 1630 /* set tx rate control information */ 1631 tpd->rate.data_cells = fore200e_vcc->rate.data_cells; 1632 tpd->rate.idle_cells = fore200e_vcc->rate.idle_cells; 1633 1634 if (cell_header) { 1635 tpd->atm_header.clp = (*cell_header & ATM_HDR_CLP); 1636 tpd->atm_header.plt = (*cell_header & ATM_HDR_PTI_MASK) >> ATM_HDR_PTI_SHIFT; 1637 tpd->atm_header.vci = (*cell_header & ATM_HDR_VCI_MASK) >> ATM_HDR_VCI_SHIFT; 1638 tpd->atm_header.vpi = (*cell_header & ATM_HDR_VPI_MASK) >> ATM_HDR_VPI_SHIFT; 1639 tpd->atm_header.gfc = (*cell_header & ATM_HDR_GFC_MASK) >> ATM_HDR_GFC_SHIFT; 1640 } 1641 else { 1642 /* set the ATM header, common to all cells conveying the PDU */ 1643 tpd->atm_header.clp = 0; 1644 tpd->atm_header.plt = 0; 1645 tpd->atm_header.vci = vcc->vci; 1646 tpd->atm_header.vpi = vcc->vpi; 1647 tpd->atm_header.gfc = 0; 1648 } 1649 1650 tpd->spec.length = tx_len; 1651 tpd->spec.nseg = 1; 1652 tpd->spec.aal = fore200e_atm2fore_aal(vcc->qos.aal); 1653 tpd->spec.intr = 1; 1654 1655 tpd_haddr.size = sizeof(struct tpd) / (1<<TPD_HADDR_SHIFT); /* size is expressed in 32 byte blocks */ 1656 tpd_haddr.pad = 0; 1657 tpd_haddr.haddr = entry->tpd_dma >> TPD_HADDR_SHIFT; /* shift the address, as we are in a bitfield */ 1658 1659 *entry->status = STATUS_PENDING; 1660 fore200e->bus->write(*(u32*)&tpd_haddr, (u32 __iomem *)&entry->cp_entry->tpd_haddr); 1661 1662 spin_unlock_irqrestore(&fore200e->q_lock, flags); 1663 1664 return 0; 1665} 1666 1667 1668static int 1669fore200e_getstats(struct fore200e* fore200e) 1670{ 1671 struct host_cmdq* cmdq = &fore200e->host_cmdq; 1672 struct host_cmdq_entry* entry = &cmdq->host_entry[ cmdq->head ]; 1673 struct stats_opcode opcode; 1674 int ok; 1675 u32 stats_dma_addr; 1676 1677 if (fore200e->stats == NULL) { 1678 fore200e->stats = kzalloc(sizeof(struct stats), GFP_KERNEL); 1679 if (fore200e->stats == NULL) 1680 return -ENOMEM; 1681 } 1682 1683 stats_dma_addr = dma_map_single(fore200e->dev, fore200e->stats, 1684 sizeof(struct stats), DMA_FROM_DEVICE); 1685 if (dma_mapping_error(fore200e->dev, stats_dma_addr)) 1686 return -ENOMEM; 1687 1688 FORE200E_NEXT_ENTRY(cmdq->head, QUEUE_SIZE_CMD); 1689 1690 opcode.opcode = OPCODE_GET_STATS; 1691 opcode.pad = 0; 1692 1693 fore200e->bus->write(stats_dma_addr, &entry->cp_entry->cmd.stats_block.stats_haddr); 1694 1695 *entry->status = STATUS_PENDING; 1696 1697 fore200e->bus->write(*(u32*)&opcode, (u32 __iomem *)&entry->cp_entry->cmd.stats_block.opcode); 1698 1699 ok = fore200e_poll(fore200e, entry->status, STATUS_COMPLETE, 400); 1700 1701 *entry->status = STATUS_FREE; 1702 1703 dma_unmap_single(fore200e->dev, stats_dma_addr, sizeof(struct stats), DMA_FROM_DEVICE); 1704 1705 if (ok == 0) { 1706 printk(FORE200E "unable to get statistics from device %s\n", fore200e->name); 1707 return -EIO; 1708 } 1709 1710 return 0; 1711} 1712 1713#if 0 /* currently unused */ 1714static int 1715fore200e_get_oc3(struct fore200e* fore200e, struct oc3_regs* regs) 1716{ 1717 struct host_cmdq* cmdq = &fore200e->host_cmdq; 1718 struct host_cmdq_entry* entry = &cmdq->host_entry[ cmdq->head ]; 1719 struct oc3_opcode opcode; 1720 int ok; 1721 u32 oc3_regs_dma_addr; 1722 1723 oc3_regs_dma_addr = fore200e->bus->dma_map(fore200e, regs, sizeof(struct oc3_regs), DMA_FROM_DEVICE); 1724 1725 FORE200E_NEXT_ENTRY(cmdq->head, QUEUE_SIZE_CMD); 1726 1727 opcode.opcode = OPCODE_GET_OC3; 1728 opcode.reg = 0; 1729 opcode.value = 0; 1730 opcode.mask = 0; 1731 1732 fore200e->bus->write(oc3_regs_dma_addr, &entry->cp_entry->cmd.oc3_block.regs_haddr); 1733 1734 *entry->status = STATUS_PENDING; 1735 1736 fore200e->bus->write(*(u32*)&opcode, (u32*)&entry->cp_entry->cmd.oc3_block.opcode); 1737 1738 ok = fore200e_poll(fore200e, entry->status, STATUS_COMPLETE, 400); 1739 1740 *entry->status = STATUS_FREE; 1741 1742 fore200e->bus->dma_unmap(fore200e, oc3_regs_dma_addr, sizeof(struct oc3_regs), DMA_FROM_DEVICE); 1743 1744 if (ok == 0) { 1745 printk(FORE200E "unable to get OC-3 regs of device %s\n", fore200e->name); 1746 return -EIO; 1747 } 1748 1749 return 0; 1750} 1751#endif 1752 1753 1754static int 1755fore200e_set_oc3(struct fore200e* fore200e, u32 reg, u32 value, u32 mask) 1756{ 1757 struct host_cmdq* cmdq = &fore200e->host_cmdq; 1758 struct host_cmdq_entry* entry = &cmdq->host_entry[ cmdq->head ]; 1759 struct oc3_opcode opcode; 1760 int ok; 1761 1762 DPRINTK(2, "set OC-3 reg = 0x%02x, value = 0x%02x, mask = 0x%02x\n", reg, value, mask); 1763 1764 FORE200E_NEXT_ENTRY(cmdq->head, QUEUE_SIZE_CMD); 1765 1766 opcode.opcode = OPCODE_SET_OC3; 1767 opcode.reg = reg; 1768 opcode.value = value; 1769 opcode.mask = mask; 1770 1771 fore200e->bus->write(0, &entry->cp_entry->cmd.oc3_block.regs_haddr); 1772 1773 *entry->status = STATUS_PENDING; 1774 1775 fore200e->bus->write(*(u32*)&opcode, (u32 __iomem *)&entry->cp_entry->cmd.oc3_block.opcode); 1776 1777 ok = fore200e_poll(fore200e, entry->status, STATUS_COMPLETE, 400); 1778 1779 *entry->status = STATUS_FREE; 1780 1781 if (ok == 0) { 1782 printk(FORE200E "unable to set OC-3 reg 0x%02x of device %s\n", reg, fore200e->name); 1783 return -EIO; 1784 } 1785 1786 return 0; 1787} 1788 1789 1790static int 1791fore200e_setloop(struct fore200e* fore200e, int loop_mode) 1792{ 1793 u32 mct_value, mct_mask; 1794 int error; 1795 1796 if (!capable(CAP_NET_ADMIN)) 1797 return -EPERM; 1798 1799 switch (loop_mode) { 1800 1801 case ATM_LM_NONE: 1802 mct_value = 0; 1803 mct_mask = SUNI_MCT_DLE | SUNI_MCT_LLE; 1804 break; 1805 1806 case ATM_LM_LOC_PHY: 1807 mct_value = mct_mask = SUNI_MCT_DLE; 1808 break; 1809 1810 case ATM_LM_RMT_PHY: 1811 mct_value = mct_mask = SUNI_MCT_LLE; 1812 break; 1813 1814 default: 1815 return -EINVAL; 1816 } 1817 1818 error = fore200e_set_oc3(fore200e, SUNI_MCT, mct_value, mct_mask); 1819 if (error == 0) 1820 fore200e->loop_mode = loop_mode; 1821 1822 return error; 1823} 1824 1825 1826static int 1827fore200e_fetch_stats(struct fore200e* fore200e, struct sonet_stats __user *arg) 1828{ 1829 struct sonet_stats tmp; 1830 1831 if (fore200e_getstats(fore200e) < 0) 1832 return -EIO; 1833 1834 tmp.section_bip = be32_to_cpu(fore200e->stats->oc3.section_bip8_errors); 1835 tmp.line_bip = be32_to_cpu(fore200e->stats->oc3.line_bip24_errors); 1836 tmp.path_bip = be32_to_cpu(fore200e->stats->oc3.path_bip8_errors); 1837 tmp.line_febe = be32_to_cpu(fore200e->stats->oc3.line_febe_errors); 1838 tmp.path_febe = be32_to_cpu(fore200e->stats->oc3.path_febe_errors); 1839 tmp.corr_hcs = be32_to_cpu(fore200e->stats->oc3.corr_hcs_errors); 1840 tmp.uncorr_hcs = be32_to_cpu(fore200e->stats->oc3.ucorr_hcs_errors); 1841 tmp.tx_cells = be32_to_cpu(fore200e->stats->aal0.cells_transmitted) + 1842 be32_to_cpu(fore200e->stats->aal34.cells_transmitted) + 1843 be32_to_cpu(fore200e->stats->aal5.cells_transmitted); 1844 tmp.rx_cells = be32_to_cpu(fore200e->stats->aal0.cells_received) + 1845 be32_to_cpu(fore200e->stats->aal34.cells_received) + 1846 be32_to_cpu(fore200e->stats->aal5.cells_received); 1847 1848 if (arg) 1849 return copy_to_user(arg, &tmp, sizeof(struct sonet_stats)) ? -EFAULT : 0; 1850 1851 return 0; 1852} 1853 1854 1855static int 1856fore200e_ioctl(struct atm_dev* dev, unsigned int cmd, void __user * arg) 1857{ 1858 struct fore200e* fore200e = FORE200E_DEV(dev); 1859 1860 DPRINTK(2, "ioctl cmd = 0x%x (%u), arg = 0x%p (%lu)\n", cmd, cmd, arg, (unsigned long)arg); 1861 1862 switch (cmd) { 1863 1864 case SONET_GETSTAT: 1865 return fore200e_fetch_stats(fore200e, (struct sonet_stats __user *)arg); 1866 1867 case SONET_GETDIAG: 1868 return put_user(0, (int __user *)arg) ? -EFAULT : 0; 1869 1870 case ATM_SETLOOP: 1871 return fore200e_setloop(fore200e, (int)(unsigned long)arg); 1872 1873 case ATM_GETLOOP: 1874 return put_user(fore200e->loop_mode, (int __user *)arg) ? -EFAULT : 0; 1875 1876 case ATM_QUERYLOOP: 1877 return put_user(ATM_LM_LOC_PHY | ATM_LM_RMT_PHY, (int __user *)arg) ? -EFAULT : 0; 1878 } 1879 1880 return -ENOSYS; /* not implemented */ 1881} 1882 1883 1884static int 1885fore200e_change_qos(struct atm_vcc* vcc,struct atm_qos* qos, int flags) 1886{ 1887 struct fore200e_vcc* fore200e_vcc = FORE200E_VCC(vcc); 1888 struct fore200e* fore200e = FORE200E_DEV(vcc->dev); 1889 1890 if (!test_bit(ATM_VF_READY, &vcc->flags)) { 1891 DPRINTK(1, "VC %d.%d.%d not ready for QoS change\n", vcc->itf, vcc->vpi, vcc->vpi); 1892 return -EINVAL; 1893 } 1894 1895 DPRINTK(2, "change_qos %d.%d.%d, " 1896 "(tx: cl=%s, pcr=%d-%d, cdv=%d, max_sdu=%d; " 1897 "rx: cl=%s, pcr=%d-%d, cdv=%d, max_sdu=%d), flags = 0x%x\n" 1898 "available_cell_rate = %u", 1899 vcc->itf, vcc->vpi, vcc->vci, 1900 fore200e_traffic_class[ qos->txtp.traffic_class ], 1901 qos->txtp.min_pcr, qos->txtp.max_pcr, qos->txtp.max_cdv, qos->txtp.max_sdu, 1902 fore200e_traffic_class[ qos->rxtp.traffic_class ], 1903 qos->rxtp.min_pcr, qos->rxtp.max_pcr, qos->rxtp.max_cdv, qos->rxtp.max_sdu, 1904 flags, fore200e->available_cell_rate); 1905 1906 if ((qos->txtp.traffic_class == ATM_CBR) && (qos->txtp.max_pcr > 0)) { 1907 1908 mutex_lock(&fore200e->rate_mtx); 1909 if (fore200e->available_cell_rate + vcc->qos.txtp.max_pcr < qos->txtp.max_pcr) { 1910 mutex_unlock(&fore200e->rate_mtx); 1911 return -EAGAIN; 1912 } 1913 1914 fore200e->available_cell_rate += vcc->qos.txtp.max_pcr; 1915 fore200e->available_cell_rate -= qos->txtp.max_pcr; 1916 1917 mutex_unlock(&fore200e->rate_mtx); 1918 1919 memcpy(&vcc->qos, qos, sizeof(struct atm_qos)); 1920 1921 /* update rate control parameters */ 1922 fore200e_rate_ctrl(qos, &fore200e_vcc->rate); 1923 1924 set_bit(ATM_VF_HASQOS, &vcc->flags); 1925 1926 return 0; 1927 } 1928 1929 return -EINVAL; 1930} 1931 1932 1933static int fore200e_irq_request(struct fore200e *fore200e) 1934{ 1935 if (request_irq(fore200e->irq, fore200e_interrupt, IRQF_SHARED, fore200e->name, fore200e->atm_dev) < 0) { 1936 1937 printk(FORE200E "unable to reserve IRQ %s for device %s\n", 1938 fore200e_irq_itoa(fore200e->irq), fore200e->name); 1939 return -EBUSY; 1940 } 1941 1942 printk(FORE200E "IRQ %s reserved for device %s\n", 1943 fore200e_irq_itoa(fore200e->irq), fore200e->name); 1944 1945#ifdef FORE200E_USE_TASKLET 1946 tasklet_init(&fore200e->tx_tasklet, fore200e_tx_tasklet, (unsigned long)fore200e); 1947 tasklet_init(&fore200e->rx_tasklet, fore200e_rx_tasklet, (unsigned long)fore200e); 1948#endif 1949 1950 fore200e->state = FORE200E_STATE_IRQ; 1951 return 0; 1952} 1953 1954 1955static int fore200e_get_esi(struct fore200e *fore200e) 1956{ 1957 struct prom_data* prom = kzalloc(sizeof(struct prom_data), GFP_KERNEL); 1958 int ok, i; 1959 1960 if (!prom) 1961 return -ENOMEM; 1962 1963 ok = fore200e->bus->prom_read(fore200e, prom); 1964 if (ok < 0) { 1965 kfree(prom); 1966 return -EBUSY; 1967 } 1968 1969 printk(FORE200E "device %s, rev. %c, S/N: %d, ESI: %pM\n", 1970 fore200e->name, 1971 (prom->hw_revision & 0xFF) + '@', /* probably meaningless with SBA boards */ 1972 prom->serial_number & 0xFFFF, &prom->mac_addr[2]); 1973 1974 for (i = 0; i < ESI_LEN; i++) { 1975 fore200e->esi[ i ] = fore200e->atm_dev->esi[ i ] = prom->mac_addr[ i + 2 ]; 1976 } 1977 1978 kfree(prom); 1979 1980 return 0; 1981} 1982 1983 1984static int fore200e_alloc_rx_buf(struct fore200e *fore200e) 1985{ 1986 int scheme, magn, nbr, size, i; 1987 1988 struct host_bsq* bsq; 1989 struct buffer* buffer; 1990 1991 for (scheme = 0; scheme < BUFFER_SCHEME_NBR; scheme++) { 1992 for (magn = 0; magn < BUFFER_MAGN_NBR; magn++) { 1993 1994 bsq = &fore200e->host_bsq[ scheme ][ magn ]; 1995 1996 nbr = fore200e_rx_buf_nbr[ scheme ][ magn ]; 1997 size = fore200e_rx_buf_size[ scheme ][ magn ]; 1998 1999 DPRINTK(2, "rx buffers %d / %d are being allocated\n", scheme, magn); 2000 2001 /* allocate the array of receive buffers */ 2002 buffer = bsq->buffer = kcalloc(nbr, sizeof(struct buffer), 2003 GFP_KERNEL); 2004 2005 if (buffer == NULL) 2006 return -ENOMEM; 2007 2008 bsq->freebuf = NULL; 2009 2010 for (i = 0; i < nbr; i++) { 2011 2012 buffer[ i ].scheme = scheme; 2013 buffer[ i ].magn = magn; 2014#ifdef FORE200E_BSQ_DEBUG 2015 buffer[ i ].index = i; 2016 buffer[ i ].supplied = 0; 2017#endif 2018 2019 /* allocate the receive buffer body */ 2020 if (fore200e_chunk_alloc(fore200e, 2021 &buffer[ i ].data, size, fore200e->bus->buffer_alignment, 2022 DMA_FROM_DEVICE) < 0) { 2023 2024 while (i > 0) 2025 fore200e_chunk_free(fore200e, &buffer[ --i ].data); 2026 kfree(buffer); 2027 2028 return -ENOMEM; 2029 } 2030 2031 /* insert the buffer into the free buffer list */ 2032 buffer[ i ].next = bsq->freebuf; 2033 bsq->freebuf = &buffer[ i ]; 2034 } 2035 /* all the buffers are free, initially */ 2036 bsq->freebuf_count = nbr; 2037 2038#ifdef FORE200E_BSQ_DEBUG 2039 bsq_audit(3, bsq, scheme, magn); 2040#endif 2041 } 2042 } 2043 2044 fore200e->state = FORE200E_STATE_ALLOC_BUF; 2045 return 0; 2046} 2047 2048 2049static int fore200e_init_bs_queue(struct fore200e *fore200e) 2050{ 2051 int scheme, magn, i; 2052 2053 struct host_bsq* bsq; 2054 struct cp_bsq_entry __iomem * cp_entry; 2055 2056 for (scheme = 0; scheme < BUFFER_SCHEME_NBR; scheme++) { 2057 for (magn = 0; magn < BUFFER_MAGN_NBR; magn++) { 2058 2059 DPRINTK(2, "buffer supply queue %d / %d is being initialized\n", scheme, magn); 2060 2061 bsq = &fore200e->host_bsq[ scheme ][ magn ]; 2062 2063 /* allocate and align the array of status words */ 2064 if (fore200e_dma_chunk_alloc(fore200e, 2065 &bsq->status, 2066 sizeof(enum status), 2067 QUEUE_SIZE_BS, 2068 fore200e->bus->status_alignment) < 0) { 2069 return -ENOMEM; 2070 } 2071 2072 /* allocate and align the array of receive buffer descriptors */ 2073 if (fore200e_dma_chunk_alloc(fore200e, 2074 &bsq->rbd_block, 2075 sizeof(struct rbd_block), 2076 QUEUE_SIZE_BS, 2077 fore200e->bus->descr_alignment) < 0) { 2078 2079 fore200e_dma_chunk_free(fore200e, &bsq->status); 2080 return -ENOMEM; 2081 } 2082 2083 /* get the base address of the cp resident buffer supply queue entries */ 2084 cp_entry = fore200e->virt_base + 2085 fore200e->bus->read(&fore200e->cp_queues->cp_bsq[ scheme ][ magn ]); 2086 2087 /* fill the host resident and cp resident buffer supply queue entries */ 2088 for (i = 0; i < QUEUE_SIZE_BS; i++) { 2089 2090 bsq->host_entry[ i ].status = 2091 FORE200E_INDEX(bsq->status.align_addr, enum status, i); 2092 bsq->host_entry[ i ].rbd_block = 2093 FORE200E_INDEX(bsq->rbd_block.align_addr, struct rbd_block, i); 2094 bsq->host_entry[ i ].rbd_block_dma = 2095 FORE200E_DMA_INDEX(bsq->rbd_block.dma_addr, struct rbd_block, i); 2096 bsq->host_entry[ i ].cp_entry = &cp_entry[ i ]; 2097 2098 *bsq->host_entry[ i ].status = STATUS_FREE; 2099 2100 fore200e->bus->write(FORE200E_DMA_INDEX(bsq->status.dma_addr, enum status, i), 2101 &cp_entry[ i ].status_haddr); 2102 } 2103 } 2104 } 2105 2106 fore200e->state = FORE200E_STATE_INIT_BSQ; 2107 return 0; 2108} 2109 2110 2111static int fore200e_init_rx_queue(struct fore200e *fore200e) 2112{ 2113 struct host_rxq* rxq = &fore200e->host_rxq; 2114 struct cp_rxq_entry __iomem * cp_entry; 2115 int i; 2116 2117 DPRINTK(2, "receive queue is being initialized\n"); 2118 2119 /* allocate and align the array of status words */ 2120 if (fore200e_dma_chunk_alloc(fore200e, 2121 &rxq->status, 2122 sizeof(enum status), 2123 QUEUE_SIZE_RX, 2124 fore200e->bus->status_alignment) < 0) { 2125 return -ENOMEM; 2126 } 2127 2128 /* allocate and align the array of receive PDU descriptors */ 2129 if (fore200e_dma_chunk_alloc(fore200e, 2130 &rxq->rpd, 2131 sizeof(struct rpd), 2132 QUEUE_SIZE_RX, 2133 fore200e->bus->descr_alignment) < 0) { 2134 2135 fore200e_dma_chunk_free(fore200e, &rxq->status); 2136 return -ENOMEM; 2137 } 2138 2139 /* get the base address of the cp resident rx queue entries */ 2140 cp_entry = fore200e->virt_base + fore200e->bus->read(&fore200e->cp_queues->cp_rxq); 2141 2142 /* fill the host resident and cp resident rx entries */ 2143 for (i=0; i < QUEUE_SIZE_RX; i++) { 2144 2145 rxq->host_entry[ i ].status = 2146 FORE200E_INDEX(rxq->status.align_addr, enum status, i); 2147 rxq->host_entry[ i ].rpd = 2148 FORE200E_INDEX(rxq->rpd.align_addr, struct rpd, i); 2149 rxq->host_entry[ i ].rpd_dma = 2150 FORE200E_DMA_INDEX(rxq->rpd.dma_addr, struct rpd, i); 2151 rxq->host_entry[ i ].cp_entry = &cp_entry[ i ]; 2152 2153 *rxq->host_entry[ i ].status = STATUS_FREE; 2154 2155 fore200e->bus->write(FORE200E_DMA_INDEX(rxq->status.dma_addr, enum status, i), 2156 &cp_entry[ i ].status_haddr); 2157 2158 fore200e->bus->write(FORE200E_DMA_INDEX(rxq->rpd.dma_addr, struct rpd, i), 2159 &cp_entry[ i ].rpd_haddr); 2160 } 2161 2162 /* set the head entry of the queue */ 2163 rxq->head = 0; 2164 2165 fore200e->state = FORE200E_STATE_INIT_RXQ; 2166 return 0; 2167} 2168 2169 2170static int fore200e_init_tx_queue(struct fore200e *fore200e) 2171{ 2172 struct host_txq* txq = &fore200e->host_txq; 2173 struct cp_txq_entry __iomem * cp_entry; 2174 int i; 2175 2176 DPRINTK(2, "transmit queue is being initialized\n"); 2177 2178 /* allocate and align the array of status words */ 2179 if (fore200e_dma_chunk_alloc(fore200e, 2180 &txq->status, 2181 sizeof(enum status), 2182 QUEUE_SIZE_TX, 2183 fore200e->bus->status_alignment) < 0) { 2184 return -ENOMEM; 2185 } 2186 2187 /* allocate and align the array of transmit PDU descriptors */ 2188 if (fore200e_dma_chunk_alloc(fore200e, 2189 &txq->tpd, 2190 sizeof(struct tpd), 2191 QUEUE_SIZE_TX, 2192 fore200e->bus->descr_alignment) < 0) { 2193 2194 fore200e_dma_chunk_free(fore200e, &txq->status); 2195 return -ENOMEM; 2196 } 2197 2198 /* get the base address of the cp resident tx queue entries */ 2199 cp_entry = fore200e->virt_base + fore200e->bus->read(&fore200e->cp_queues->cp_txq); 2200 2201 /* fill the host resident and cp resident tx entries */ 2202 for (i=0; i < QUEUE_SIZE_TX; i++) { 2203 2204 txq->host_entry[ i ].status = 2205 FORE200E_INDEX(txq->status.align_addr, enum status, i); 2206 txq->host_entry[ i ].tpd = 2207 FORE200E_INDEX(txq->tpd.align_addr, struct tpd, i); 2208 txq->host_entry[ i ].tpd_dma = 2209 FORE200E_DMA_INDEX(txq->tpd.dma_addr, struct tpd, i); 2210 txq->host_entry[ i ].cp_entry = &cp_entry[ i ]; 2211 2212 *txq->host_entry[ i ].status = STATUS_FREE; 2213 2214 fore200e->bus->write(FORE200E_DMA_INDEX(txq->status.dma_addr, enum status, i), 2215 &cp_entry[ i ].status_haddr); 2216 2217 /* although there is a one-to-one mapping of tx queue entries and tpds, 2218 we do not write here the DMA (physical) base address of each tpd into 2219 the related cp resident entry, because the cp relies on this write 2220 operation to detect that a new pdu has been submitted for tx */ 2221 } 2222 2223 /* set the head and tail entries of the queue */ 2224 txq->head = 0; 2225 txq->tail = 0; 2226 2227 fore200e->state = FORE200E_STATE_INIT_TXQ; 2228 return 0; 2229} 2230 2231 2232static int fore200e_init_cmd_queue(struct fore200e *fore200e) 2233{ 2234 struct host_cmdq* cmdq = &fore200e->host_cmdq; 2235 struct cp_cmdq_entry __iomem * cp_entry; 2236 int i; 2237 2238 DPRINTK(2, "command queue is being initialized\n"); 2239 2240 /* allocate and align the array of status words */ 2241 if (fore200e_dma_chunk_alloc(fore200e, 2242 &cmdq->status, 2243 sizeof(enum status), 2244 QUEUE_SIZE_CMD, 2245 fore200e->bus->status_alignment) < 0) { 2246 return -ENOMEM; 2247 } 2248 2249 /* get the base address of the cp resident cmd queue entries */ 2250 cp_entry = fore200e->virt_base + fore200e->bus->read(&fore200e->cp_queues->cp_cmdq); 2251 2252 /* fill the host resident and cp resident cmd entries */ 2253 for (i=0; i < QUEUE_SIZE_CMD; i++) { 2254 2255 cmdq->host_entry[ i ].status = 2256 FORE200E_INDEX(cmdq->status.align_addr, enum status, i); 2257 cmdq->host_entry[ i ].cp_entry = &cp_entry[ i ]; 2258 2259 *cmdq->host_entry[ i ].status = STATUS_FREE; 2260 2261 fore200e->bus->write(FORE200E_DMA_INDEX(cmdq->status.dma_addr, enum status, i), 2262 &cp_entry[ i ].status_haddr); 2263 } 2264 2265 /* set the head entry of the queue */ 2266 cmdq->head = 0; 2267 2268 fore200e->state = FORE200E_STATE_INIT_CMDQ; 2269 return 0; 2270} 2271 2272 2273static void fore200e_param_bs_queue(struct fore200e *fore200e, 2274 enum buffer_scheme scheme, 2275 enum buffer_magn magn, int queue_length, 2276 int pool_size, int supply_blksize) 2277{ 2278 struct bs_spec __iomem * bs_spec = &fore200e->cp_queues->init.bs_spec[ scheme ][ magn ]; 2279 2280 fore200e->bus->write(queue_length, &bs_spec->queue_length); 2281 fore200e->bus->write(fore200e_rx_buf_size[ scheme ][ magn ], &bs_spec->buffer_size); 2282 fore200e->bus->write(pool_size, &bs_spec->pool_size); 2283 fore200e->bus->write(supply_blksize, &bs_spec->supply_blksize); 2284} 2285 2286 2287static int fore200e_initialize(struct fore200e *fore200e) 2288{ 2289 struct cp_queues __iomem * cpq; 2290 int ok, scheme, magn; 2291 2292 DPRINTK(2, "device %s being initialized\n", fore200e->name); 2293 2294 mutex_init(&fore200e->rate_mtx); 2295 spin_lock_init(&fore200e->q_lock); 2296 2297 cpq = fore200e->cp_queues = fore200e->virt_base + FORE200E_CP_QUEUES_OFFSET; 2298 2299 /* enable cp to host interrupts */ 2300 fore200e->bus->write(1, &cpq->imask); 2301 2302 if (fore200e->bus->irq_enable) 2303 fore200e->bus->irq_enable(fore200e); 2304 2305 fore200e->bus->write(NBR_CONNECT, &cpq->init.num_connect); 2306 2307 fore200e->bus->write(QUEUE_SIZE_CMD, &cpq->init.cmd_queue_len); 2308 fore200e->bus->write(QUEUE_SIZE_RX, &cpq->init.rx_queue_len); 2309 fore200e->bus->write(QUEUE_SIZE_TX, &cpq->init.tx_queue_len); 2310 2311 fore200e->bus->write(RSD_EXTENSION, &cpq->init.rsd_extension); 2312 fore200e->bus->write(TSD_EXTENSION, &cpq->init.tsd_extension); 2313 2314 for (scheme = 0; scheme < BUFFER_SCHEME_NBR; scheme++) 2315 for (magn = 0; magn < BUFFER_MAGN_NBR; magn++) 2316 fore200e_param_bs_queue(fore200e, scheme, magn, 2317 QUEUE_SIZE_BS, 2318 fore200e_rx_buf_nbr[ scheme ][ magn ], 2319 RBD_BLK_SIZE); 2320 2321 /* issue the initialize command */ 2322 fore200e->bus->write(STATUS_PENDING, &cpq->init.status); 2323 fore200e->bus->write(OPCODE_INITIALIZE, &cpq->init.opcode); 2324 2325 ok = fore200e_io_poll(fore200e, &cpq->init.status, STATUS_COMPLETE, 3000); 2326 if (ok == 0) { 2327 printk(FORE200E "device %s initialization failed\n", fore200e->name); 2328 return -ENODEV; 2329 } 2330 2331 printk(FORE200E "device %s initialized\n", fore200e->name); 2332 2333 fore200e->state = FORE200E_STATE_INITIALIZE; 2334 return 0; 2335} 2336 2337 2338static void fore200e_monitor_putc(struct fore200e *fore200e, char c) 2339{ 2340 struct cp_monitor __iomem * monitor = fore200e->cp_monitor; 2341 2342#if 0 2343 printk("%c", c); 2344#endif 2345 fore200e->bus->write(((u32) c) | FORE200E_CP_MONITOR_UART_AVAIL, &monitor->soft_uart.send); 2346} 2347 2348 2349static int fore200e_monitor_getc(struct fore200e *fore200e) 2350{ 2351 struct cp_monitor __iomem * monitor = fore200e->cp_monitor; 2352 unsigned long timeout = jiffies + msecs_to_jiffies(50); 2353 int c; 2354 2355 while (time_before(jiffies, timeout)) { 2356 2357 c = (int) fore200e->bus->read(&monitor->soft_uart.recv); 2358 2359 if (c & FORE200E_CP_MONITOR_UART_AVAIL) { 2360 2361 fore200e->bus->write(FORE200E_CP_MONITOR_UART_FREE, &monitor->soft_uart.recv); 2362#if 0 2363 printk("%c", c & 0xFF); 2364#endif 2365 return c & 0xFF; 2366 } 2367 } 2368 2369 return -1; 2370} 2371 2372 2373static void fore200e_monitor_puts(struct fore200e *fore200e, char *str) 2374{ 2375 while (*str) { 2376 2377 /* the i960 monitor doesn't accept any new character if it has something to say */ 2378 while (fore200e_monitor_getc(fore200e) >= 0); 2379 2380 fore200e_monitor_putc(fore200e, *str++); 2381 } 2382 2383 while (fore200e_monitor_getc(fore200e) >= 0); 2384} 2385 2386#ifdef __LITTLE_ENDIAN 2387#define FW_EXT ".bin" 2388#else 2389#define FW_EXT "_ecd.bin2" 2390#endif 2391 2392static int fore200e_load_and_start_fw(struct fore200e *fore200e) 2393{ 2394 const struct firmware *firmware; 2395 const struct fw_header *fw_header; 2396 const __le32 *fw_data; 2397 u32 fw_size; 2398 u32 __iomem *load_addr; 2399 char buf[48]; 2400 int err; 2401 2402 sprintf(buf, "%s%s", fore200e->bus->proc_name, FW_EXT); 2403 if ((err = request_firmware(&firmware, buf, fore200e->dev)) < 0) { 2404 printk(FORE200E "problem loading firmware image %s\n", fore200e->bus->model_name); 2405 return err; 2406 } 2407 2408 fw_data = (const __le32 *)firmware->data; 2409 fw_size = firmware->size / sizeof(u32); 2410 fw_header = (const struct fw_header *)firmware->data; 2411 load_addr = fore200e->virt_base + le32_to_cpu(fw_header->load_offset); 2412 2413 DPRINTK(2, "device %s firmware being loaded at 0x%p (%d words)\n", 2414 fore200e->name, load_addr, fw_size); 2415 2416 if (le32_to_cpu(fw_header->magic) != FW_HEADER_MAGIC) { 2417 printk(FORE200E "corrupted %s firmware image\n", fore200e->bus->model_name); 2418 goto release; 2419 } 2420 2421 for (; fw_size--; fw_data++, load_addr++) 2422 fore200e->bus->write(le32_to_cpu(*fw_data), load_addr); 2423 2424 DPRINTK(2, "device %s firmware being started\n", fore200e->name); 2425 2426#if defined(__sparc_v9__) 2427 /* reported to be required by SBA cards on some sparc64 hosts */ 2428 fore200e_spin(100); 2429#endif 2430 2431 sprintf(buf, "\rgo %x\r", le32_to_cpu(fw_header->start_offset)); 2432 fore200e_monitor_puts(fore200e, buf); 2433 2434 if (fore200e_io_poll(fore200e, &fore200e->cp_monitor->bstat, BSTAT_CP_RUNNING, 1000) == 0) { 2435 printk(FORE200E "device %s firmware didn't start\n", fore200e->name); 2436 goto release; 2437 } 2438 2439 printk(FORE200E "device %s firmware started\n", fore200e->name); 2440 2441 fore200e->state = FORE200E_STATE_START_FW; 2442 err = 0; 2443 2444release: 2445 release_firmware(firmware); 2446 return err; 2447} 2448 2449 2450static int fore200e_register(struct fore200e *fore200e, struct device *parent) 2451{ 2452 struct atm_dev* atm_dev; 2453 2454 DPRINTK(2, "device %s being registered\n", fore200e->name); 2455 2456 atm_dev = atm_dev_register(fore200e->bus->proc_name, parent, &fore200e_ops, 2457 -1, NULL); 2458 if (atm_dev == NULL) { 2459 printk(FORE200E "unable to register device %s\n", fore200e->name); 2460 return -ENODEV; 2461 } 2462 2463 atm_dev->dev_data = fore200e; 2464 fore200e->atm_dev = atm_dev; 2465 2466 atm_dev->ci_range.vpi_bits = FORE200E_VPI_BITS; 2467 atm_dev->ci_range.vci_bits = FORE200E_VCI_BITS; 2468 2469 fore200e->available_cell_rate = ATM_OC3_PCR; 2470 2471 fore200e->state = FORE200E_STATE_REGISTER; 2472 return 0; 2473} 2474 2475 2476static int fore200e_init(struct fore200e *fore200e, struct device *parent) 2477{ 2478 if (fore200e_register(fore200e, parent) < 0) 2479 return -ENODEV; 2480 2481 if (fore200e->bus->configure(fore200e) < 0) 2482 return -ENODEV; 2483 2484 if (fore200e->bus->map(fore200e) < 0) 2485 return -ENODEV; 2486 2487 if (fore200e_reset(fore200e, 1) < 0) 2488 return -ENODEV; 2489 2490 if (fore200e_load_and_start_fw(fore200e) < 0) 2491 return -ENODEV; 2492 2493 if (fore200e_initialize(fore200e) < 0) 2494 return -ENODEV; 2495 2496 if (fore200e_init_cmd_queue(fore200e) < 0) 2497 return -ENOMEM; 2498 2499 if (fore200e_init_tx_queue(fore200e) < 0) 2500 return -ENOMEM; 2501 2502 if (fore200e_init_rx_queue(fore200e) < 0) 2503 return -ENOMEM; 2504 2505 if (fore200e_init_bs_queue(fore200e) < 0) 2506 return -ENOMEM; 2507 2508 if (fore200e_alloc_rx_buf(fore200e) < 0) 2509 return -ENOMEM; 2510 2511 if (fore200e_get_esi(fore200e) < 0) 2512 return -EIO; 2513 2514 if (fore200e_irq_request(fore200e) < 0) 2515 return -EBUSY; 2516 2517 fore200e_supply(fore200e); 2518 2519 /* all done, board initialization is now complete */ 2520 fore200e->state = FORE200E_STATE_COMPLETE; 2521 return 0; 2522} 2523 2524#ifdef CONFIG_SBUS 2525static const struct of_device_id fore200e_sba_match[]; 2526static int fore200e_sba_probe(struct platform_device *op) 2527{ 2528 const struct of_device_id *match; 2529 struct fore200e *fore200e; 2530 static int index = 0; 2531 int err; 2532 2533 match = of_match_device(fore200e_sba_match, &op->dev); 2534 if (!match) 2535 return -EINVAL; 2536 2537 fore200e = kzalloc(sizeof(struct fore200e), GFP_KERNEL); 2538 if (!fore200e) 2539 return -ENOMEM; 2540 2541 fore200e->bus = &fore200e_sbus_ops; 2542 fore200e->dev = &op->dev; 2543 fore200e->irq = op->archdata.irqs[0]; 2544 fore200e->phys_base = op->resource[0].start; 2545 2546 sprintf(fore200e->name, "SBA-200E-%d", index); 2547 2548 err = fore200e_init(fore200e, &op->dev); 2549 if (err < 0) { 2550 fore200e_shutdown(fore200e); 2551 kfree(fore200e); 2552 return err; 2553 } 2554 2555 index++; 2556 dev_set_drvdata(&op->dev, fore200e); 2557 2558 return 0; 2559} 2560 2561static int fore200e_sba_remove(struct platform_device *op) 2562{ 2563 struct fore200e *fore200e = dev_get_drvdata(&op->dev); 2564 2565 fore200e_shutdown(fore200e); 2566 kfree(fore200e); 2567 2568 return 0; 2569} 2570 2571static const struct of_device_id fore200e_sba_match[] = { 2572 { 2573 .name = SBA200E_PROM_NAME, 2574 }, 2575 {}, 2576}; 2577MODULE_DEVICE_TABLE(of, fore200e_sba_match); 2578 2579static struct platform_driver fore200e_sba_driver = { 2580 .driver = { 2581 .name = "fore_200e", 2582 .of_match_table = fore200e_sba_match, 2583 }, 2584 .probe = fore200e_sba_probe, 2585 .remove = fore200e_sba_remove, 2586}; 2587#endif 2588 2589#ifdef CONFIG_PCI 2590static int fore200e_pca_detect(struct pci_dev *pci_dev, 2591 const struct pci_device_id *pci_ent) 2592{ 2593 struct fore200e* fore200e; 2594 int err = 0; 2595 static int index = 0; 2596 2597 if (pci_enable_device(pci_dev)) { 2598 err = -EINVAL; 2599 goto out; 2600 } 2601 2602 if (dma_set_mask_and_coherent(&pci_dev->dev, DMA_BIT_MASK(32))) { 2603 err = -EINVAL; 2604 goto out; 2605 } 2606 2607 fore200e = kzalloc(sizeof(struct fore200e), GFP_KERNEL); 2608 if (fore200e == NULL) { 2609 err = -ENOMEM; 2610 goto out_disable; 2611 } 2612 2613 fore200e->bus = &fore200e_pci_ops; 2614 fore200e->dev = &pci_dev->dev; 2615 fore200e->irq = pci_dev->irq; 2616 fore200e->phys_base = pci_resource_start(pci_dev, 0); 2617 2618 sprintf(fore200e->name, "PCA-200E-%d", index - 1); 2619 2620 pci_set_master(pci_dev); 2621 2622 printk(FORE200E "device PCA-200E found at 0x%lx, IRQ %s\n", 2623 fore200e->phys_base, fore200e_irq_itoa(fore200e->irq)); 2624 2625 sprintf(fore200e->name, "PCA-200E-%d", index); 2626 2627 err = fore200e_init(fore200e, &pci_dev->dev); 2628 if (err < 0) { 2629 fore200e_shutdown(fore200e); 2630 goto out_free; 2631 } 2632 2633 ++index; 2634 pci_set_drvdata(pci_dev, fore200e); 2635 2636out: 2637 return err; 2638 2639out_free: 2640 kfree(fore200e); 2641out_disable: 2642 pci_disable_device(pci_dev); 2643 goto out; 2644} 2645 2646 2647static void fore200e_pca_remove_one(struct pci_dev *pci_dev) 2648{ 2649 struct fore200e *fore200e; 2650 2651 fore200e = pci_get_drvdata(pci_dev); 2652 2653 fore200e_shutdown(fore200e); 2654 kfree(fore200e); 2655 pci_disable_device(pci_dev); 2656} 2657 2658 2659static const struct pci_device_id fore200e_pca_tbl[] = { 2660 { PCI_VENDOR_ID_FORE, PCI_DEVICE_ID_FORE_PCA200E, PCI_ANY_ID, PCI_ANY_ID }, 2661 { 0, } 2662}; 2663 2664MODULE_DEVICE_TABLE(pci, fore200e_pca_tbl); 2665 2666static struct pci_driver fore200e_pca_driver = { 2667 .name = "fore_200e", 2668 .probe = fore200e_pca_detect, 2669 .remove = fore200e_pca_remove_one, 2670 .id_table = fore200e_pca_tbl, 2671}; 2672#endif 2673 2674static int __init fore200e_module_init(void) 2675{ 2676 int err = 0; 2677 2678 printk(FORE200E "FORE Systems 200E-series ATM driver - version " FORE200E_VERSION "\n"); 2679 2680#ifdef CONFIG_SBUS 2681 err = platform_driver_register(&fore200e_sba_driver); 2682 if (err) 2683 return err; 2684#endif 2685 2686#ifdef CONFIG_PCI 2687 err = pci_register_driver(&fore200e_pca_driver); 2688#endif 2689 2690#ifdef CONFIG_SBUS 2691 if (err) 2692 platform_driver_unregister(&fore200e_sba_driver); 2693#endif 2694 2695 return err; 2696} 2697 2698static void __exit fore200e_module_cleanup(void) 2699{ 2700#ifdef CONFIG_PCI 2701 pci_unregister_driver(&fore200e_pca_driver); 2702#endif 2703#ifdef CONFIG_SBUS 2704 platform_driver_unregister(&fore200e_sba_driver); 2705#endif 2706} 2707 2708static int 2709fore200e_proc_read(struct atm_dev *dev, loff_t* pos, char* page) 2710{ 2711 struct fore200e* fore200e = FORE200E_DEV(dev); 2712 struct fore200e_vcc* fore200e_vcc; 2713 struct atm_vcc* vcc; 2714 int i, len, left = *pos; 2715 unsigned long flags; 2716 2717 if (!left--) { 2718 2719 if (fore200e_getstats(fore200e) < 0) 2720 return -EIO; 2721 2722 len = sprintf(page,"\n" 2723 " device:\n" 2724 " internal name:\t\t%s\n", fore200e->name); 2725 2726 /* print bus-specific information */ 2727 if (fore200e->bus->proc_read) 2728 len += fore200e->bus->proc_read(fore200e, page + len); 2729 2730 len += sprintf(page + len, 2731 " interrupt line:\t\t%s\n" 2732 " physical base address:\t0x%p\n" 2733 " virtual base address:\t0x%p\n" 2734 " factory address (ESI):\t%pM\n" 2735 " board serial number:\t\t%d\n\n", 2736 fore200e_irq_itoa(fore200e->irq), 2737 (void*)fore200e->phys_base, 2738 fore200e->virt_base, 2739 fore200e->esi, 2740 fore200e->esi[4] * 256 + fore200e->esi[5]); 2741 2742 return len; 2743 } 2744 2745 if (!left--) 2746 return sprintf(page, 2747 " free small bufs, scheme 1:\t%d\n" 2748 " free large bufs, scheme 1:\t%d\n" 2749 " free small bufs, scheme 2:\t%d\n" 2750 " free large bufs, scheme 2:\t%d\n", 2751 fore200e->host_bsq[ BUFFER_SCHEME_ONE ][ BUFFER_MAGN_SMALL ].freebuf_count, 2752 fore200e->host_bsq[ BUFFER_SCHEME_ONE ][ BUFFER_MAGN_LARGE ].freebuf_count, 2753 fore200e->host_bsq[ BUFFER_SCHEME_TWO ][ BUFFER_MAGN_SMALL ].freebuf_count, 2754 fore200e->host_bsq[ BUFFER_SCHEME_TWO ][ BUFFER_MAGN_LARGE ].freebuf_count); 2755 2756 if (!left--) { 2757 u32 hb = fore200e->bus->read(&fore200e->cp_queues->heartbeat); 2758 2759 len = sprintf(page,"\n\n" 2760 " cell processor:\n" 2761 " heartbeat state:\t\t"); 2762 2763 if (hb >> 16 != 0xDEAD) 2764 len += sprintf(page + len, "0x%08x\n", hb); 2765 else 2766 len += sprintf(page + len, "*** FATAL ERROR %04x ***\n", hb & 0xFFFF); 2767 2768 return len; 2769 } 2770 2771 if (!left--) { 2772 static const char* media_name[] = { 2773 "unshielded twisted pair", 2774 "multimode optical fiber ST", 2775 "multimode optical fiber SC", 2776 "single-mode optical fiber ST", 2777 "single-mode optical fiber SC", 2778 "unknown" 2779 }; 2780 2781 static const char* oc3_mode[] = { 2782 "normal operation", 2783 "diagnostic loopback", 2784 "line loopback", 2785 "unknown" 2786 }; 2787 2788 u32 fw_release = fore200e->bus->read(&fore200e->cp_queues->fw_release); 2789 u32 mon960_release = fore200e->bus->read(&fore200e->cp_queues->mon960_release); 2790 u32 oc3_revision = fore200e->bus->read(&fore200e->cp_queues->oc3_revision); 2791 u32 media_index = FORE200E_MEDIA_INDEX(fore200e->bus->read(&fore200e->cp_queues->media_type)); 2792 u32 oc3_index; 2793 2794 if (media_index > 4) 2795 media_index = 5; 2796 2797 switch (fore200e->loop_mode) { 2798 case ATM_LM_NONE: oc3_index = 0; 2799 break; 2800 case ATM_LM_LOC_PHY: oc3_index = 1; 2801 break; 2802 case ATM_LM_RMT_PHY: oc3_index = 2; 2803 break; 2804 default: oc3_index = 3; 2805 } 2806 2807 return sprintf(page, 2808 " firmware release:\t\t%d.%d.%d\n" 2809 " monitor release:\t\t%d.%d\n" 2810 " media type:\t\t\t%s\n" 2811 " OC-3 revision:\t\t0x%x\n" 2812 " OC-3 mode:\t\t\t%s", 2813 fw_release >> 16, fw_release << 16 >> 24, fw_release << 24 >> 24, 2814 mon960_release >> 16, mon960_release << 16 >> 16, 2815 media_name[ media_index ], 2816 oc3_revision, 2817 oc3_mode[ oc3_index ]); 2818 } 2819 2820 if (!left--) { 2821 struct cp_monitor __iomem * cp_monitor = fore200e->cp_monitor; 2822 2823 return sprintf(page, 2824 "\n\n" 2825 " monitor:\n" 2826 " version number:\t\t%d\n" 2827 " boot status word:\t\t0x%08x\n", 2828 fore200e->bus->read(&cp_monitor->mon_version), 2829 fore200e->bus->read(&cp_monitor->bstat)); 2830 } 2831 2832 if (!left--) 2833 return sprintf(page, 2834 "\n" 2835 " device statistics:\n" 2836 " 4b5b:\n" 2837 " crc_header_errors:\t\t%10u\n" 2838 " framing_errors:\t\t%10u\n", 2839 be32_to_cpu(fore200e->stats->phy.crc_header_errors), 2840 be32_to_cpu(fore200e->stats->phy.framing_errors)); 2841 2842 if (!left--) 2843 return sprintf(page, "\n" 2844 " OC-3:\n" 2845 " section_bip8_errors:\t%10u\n" 2846 " path_bip8_errors:\t\t%10u\n" 2847 " line_bip24_errors:\t\t%10u\n" 2848 " line_febe_errors:\t\t%10u\n" 2849 " path_febe_errors:\t\t%10u\n" 2850 " corr_hcs_errors:\t\t%10u\n" 2851 " ucorr_hcs_errors:\t\t%10u\n", 2852 be32_to_cpu(fore200e->stats->oc3.section_bip8_errors), 2853 be32_to_cpu(fore200e->stats->oc3.path_bip8_errors), 2854 be32_to_cpu(fore200e->stats->oc3.line_bip24_errors), 2855 be32_to_cpu(fore200e->stats->oc3.line_febe_errors), 2856 be32_to_cpu(fore200e->stats->oc3.path_febe_errors), 2857 be32_to_cpu(fore200e->stats->oc3.corr_hcs_errors), 2858 be32_to_cpu(fore200e->stats->oc3.ucorr_hcs_errors)); 2859 2860 if (!left--) 2861 return sprintf(page,"\n" 2862 " ATM:\t\t\t\t cells\n" 2863 " TX:\t\t\t%10u\n" 2864 " RX:\t\t\t%10u\n" 2865 " vpi out of range:\t\t%10u\n" 2866 " vpi no conn:\t\t%10u\n" 2867 " vci out of range:\t\t%10u\n" 2868 " vci no conn:\t\t%10u\n", 2869 be32_to_cpu(fore200e->stats->atm.cells_transmitted), 2870 be32_to_cpu(fore200e->stats->atm.cells_received), 2871 be32_to_cpu(fore200e->stats->atm.vpi_bad_range), 2872 be32_to_cpu(fore200e->stats->atm.vpi_no_conn), 2873 be32_to_cpu(fore200e->stats->atm.vci_bad_range), 2874 be32_to_cpu(fore200e->stats->atm.vci_no_conn)); 2875 2876 if (!left--) 2877 return sprintf(page,"\n" 2878 " AAL0:\t\t\t cells\n" 2879 " TX:\t\t\t%10u\n" 2880 " RX:\t\t\t%10u\n" 2881 " dropped:\t\t\t%10u\n", 2882 be32_to_cpu(fore200e->stats->aal0.cells_transmitted), 2883 be32_to_cpu(fore200e->stats->aal0.cells_received), 2884 be32_to_cpu(fore200e->stats->aal0.cells_dropped)); 2885 2886 if (!left--) 2887 return sprintf(page,"\n" 2888 " AAL3/4:\n" 2889 " SAR sublayer:\t\t cells\n" 2890 " TX:\t\t\t%10u\n" 2891 " RX:\t\t\t%10u\n" 2892 " dropped:\t\t\t%10u\n" 2893 " CRC errors:\t\t%10u\n" 2894 " protocol errors:\t\t%10u\n\n" 2895 " CS sublayer:\t\t PDUs\n" 2896 " TX:\t\t\t%10u\n" 2897 " RX:\t\t\t%10u\n" 2898 " dropped:\t\t\t%10u\n" 2899 " protocol errors:\t\t%10u\n", 2900 be32_to_cpu(fore200e->stats->aal34.cells_transmitted), 2901 be32_to_cpu(fore200e->stats->aal34.cells_received), 2902 be32_to_cpu(fore200e->stats->aal34.cells_dropped), 2903 be32_to_cpu(fore200e->stats->aal34.cells_crc_errors), 2904 be32_to_cpu(fore200e->stats->aal34.cells_protocol_errors), 2905 be32_to_cpu(fore200e->stats->aal34.cspdus_transmitted), 2906 be32_to_cpu(fore200e->stats->aal34.cspdus_received), 2907 be32_to_cpu(fore200e->stats->aal34.cspdus_dropped), 2908 be32_to_cpu(fore200e->stats->aal34.cspdus_protocol_errors)); 2909 2910 if (!left--) 2911 return sprintf(page,"\n" 2912 " AAL5:\n" 2913 " SAR sublayer:\t\t cells\n" 2914 " TX:\t\t\t%10u\n" 2915 " RX:\t\t\t%10u\n" 2916 " dropped:\t\t\t%10u\n" 2917 " congestions:\t\t%10u\n\n" 2918 " CS sublayer:\t\t PDUs\n" 2919 " TX:\t\t\t%10u\n" 2920 " RX:\t\t\t%10u\n" 2921 " dropped:\t\t\t%10u\n" 2922 " CRC errors:\t\t%10u\n" 2923 " protocol errors:\t\t%10u\n", 2924 be32_to_cpu(fore200e->stats->aal5.cells_transmitted), 2925 be32_to_cpu(fore200e->stats->aal5.cells_received), 2926 be32_to_cpu(fore200e->stats->aal5.cells_dropped), 2927 be32_to_cpu(fore200e->stats->aal5.congestion_experienced), 2928 be32_to_cpu(fore200e->stats->aal5.cspdus_transmitted), 2929 be32_to_cpu(fore200e->stats->aal5.cspdus_received), 2930 be32_to_cpu(fore200e->stats->aal5.cspdus_dropped), 2931 be32_to_cpu(fore200e->stats->aal5.cspdus_crc_errors), 2932 be32_to_cpu(fore200e->stats->aal5.cspdus_protocol_errors)); 2933 2934 if (!left--) 2935 return sprintf(page,"\n" 2936 " AUX:\t\t allocation failures\n" 2937 " small b1:\t\t\t%10u\n" 2938 " large b1:\t\t\t%10u\n" 2939 " small b2:\t\t\t%10u\n" 2940 " large b2:\t\t\t%10u\n" 2941 " RX PDUs:\t\t\t%10u\n" 2942 " TX PDUs:\t\t\t%10lu\n", 2943 be32_to_cpu(fore200e->stats->aux.small_b1_failed), 2944 be32_to_cpu(fore200e->stats->aux.large_b1_failed), 2945 be32_to_cpu(fore200e->stats->aux.small_b2_failed), 2946 be32_to_cpu(fore200e->stats->aux.large_b2_failed), 2947 be32_to_cpu(fore200e->stats->aux.rpd_alloc_failed), 2948 fore200e->tx_sat); 2949 2950 if (!left--) 2951 return sprintf(page,"\n" 2952 " receive carrier:\t\t\t%s\n", 2953 fore200e->stats->aux.receive_carrier ? "ON" : "OFF!"); 2954 2955 if (!left--) { 2956 return sprintf(page,"\n" 2957 " VCCs:\n address VPI VCI AAL " 2958 "TX PDUs TX min/max size RX PDUs RX min/max size\n"); 2959 } 2960 2961 for (i = 0; i < NBR_CONNECT; i++) { 2962 2963 vcc = fore200e->vc_map[i].vcc; 2964 2965 if (vcc == NULL) 2966 continue; 2967 2968 spin_lock_irqsave(&fore200e->q_lock, flags); 2969 2970 if (vcc && test_bit(ATM_VF_READY, &vcc->flags) && !left--) { 2971 2972 fore200e_vcc = FORE200E_VCC(vcc); 2973 ASSERT(fore200e_vcc); 2974 2975 len = sprintf(page, 2976 " %pK %03d %05d %1d %09lu %05d/%05d %09lu %05d/%05d\n", 2977 vcc, 2978 vcc->vpi, vcc->vci, fore200e_atm2fore_aal(vcc->qos.aal), 2979 fore200e_vcc->tx_pdu, 2980 fore200e_vcc->tx_min_pdu > 0xFFFF ? 0 : fore200e_vcc->tx_min_pdu, 2981 fore200e_vcc->tx_max_pdu, 2982 fore200e_vcc->rx_pdu, 2983 fore200e_vcc->rx_min_pdu > 0xFFFF ? 0 : fore200e_vcc->rx_min_pdu, 2984 fore200e_vcc->rx_max_pdu); 2985 2986 spin_unlock_irqrestore(&fore200e->q_lock, flags); 2987 return len; 2988 } 2989 2990 spin_unlock_irqrestore(&fore200e->q_lock, flags); 2991 } 2992 2993 return 0; 2994} 2995 2996module_init(fore200e_module_init); 2997module_exit(fore200e_module_cleanup); 2998 2999 3000static const struct atmdev_ops fore200e_ops = { 3001 .open = fore200e_open, 3002 .close = fore200e_close, 3003 .ioctl = fore200e_ioctl, 3004 .send = fore200e_send, 3005 .change_qos = fore200e_change_qos, 3006 .proc_read = fore200e_proc_read, 3007 .owner = THIS_MODULE 3008}; 3009 3010MODULE_LICENSE("GPL"); 3011#ifdef CONFIG_PCI 3012#ifdef __LITTLE_ENDIAN__ 3013MODULE_FIRMWARE("pca200e.bin"); 3014#else 3015MODULE_FIRMWARE("pca200e_ecd.bin2"); 3016#endif 3017#endif /* CONFIG_PCI */ 3018#ifdef CONFIG_SBUS 3019MODULE_FIRMWARE("sba200e_ecd.bin2"); 3020#endif 3021