1/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ 2#ifndef _ASM_X86_BOOTPARAM_H 3#define _ASM_X86_BOOTPARAM_H 4 5/* setup_data/setup_indirect types */ 6#define SETUP_NONE 0 7#define SETUP_E820_EXT 1 8#define SETUP_DTB 2 9#define SETUP_PCI 3 10#define SETUP_EFI 4 11#define SETUP_APPLE_PROPERTIES 5 12#define SETUP_JAILHOUSE 6 13 14#define SETUP_INDIRECT (1<<31) 15 16/* SETUP_INDIRECT | max(SETUP_*) */ 17#define SETUP_TYPE_MAX (SETUP_INDIRECT | SETUP_JAILHOUSE) 18 19/* ram_size flags */ 20#define RAMDISK_IMAGE_START_MASK 0x07FF 21#define RAMDISK_PROMPT_FLAG 0x8000 22#define RAMDISK_LOAD_FLAG 0x4000 23 24/* loadflags */ 25#define LOADED_HIGH (1<<0) 26#define KASLR_FLAG (1<<1) 27#define QUIET_FLAG (1<<5) 28#define KEEP_SEGMENTS (1<<6) 29#define CAN_USE_HEAP (1<<7) 30 31/* xloadflags */ 32#define XLF_KERNEL_64 (1<<0) 33#define XLF_CAN_BE_LOADED_ABOVE_4G (1<<1) 34#define XLF_EFI_HANDOVER_32 (1<<2) 35#define XLF_EFI_HANDOVER_64 (1<<3) 36#define XLF_EFI_KEXEC (1<<4) 37#define XLF_5LEVEL (1<<5) 38#define XLF_5LEVEL_ENABLED (1<<6) 39 40#ifndef __ASSEMBLY__ 41 42#include <linux/types.h> 43#include <linux/screen_info.h> 44#include <linux/apm_bios.h> 45#include <linux/edd.h> 46#include <asm/ist.h> 47#include <video/edid.h> 48 49/* extensible setup data list node */ 50struct setup_data { 51 __u64 next; 52 __u32 type; 53 __u32 len; 54 __u8 data[0]; 55}; 56 57/* extensible setup indirect data node */ 58struct setup_indirect { 59 __u32 type; 60 __u32 reserved; /* Reserved, must be set to zero. */ 61 __u64 len; 62 __u64 addr; 63}; 64 65struct setup_header { 66 __u8 setup_sects; 67 __u16 root_flags; 68 __u32 syssize; 69 __u16 ram_size; 70 __u16 vid_mode; 71 __u16 root_dev; 72 __u16 boot_flag; 73 __u16 jump; 74 __u32 header; 75 __u16 version; 76 __u32 realmode_swtch; 77 __u16 start_sys_seg; 78 __u16 kernel_version; 79 __u8 type_of_loader; 80 __u8 loadflags; 81 __u16 setup_move_size; 82 __u32 code32_start; 83 __u32 ramdisk_image; 84 __u32 ramdisk_size; 85 __u32 bootsect_kludge; 86 __u16 heap_end_ptr; 87 __u8 ext_loader_ver; 88 __u8 ext_loader_type; 89 __u32 cmd_line_ptr; 90 __u32 initrd_addr_max; 91 __u32 kernel_alignment; 92 __u8 relocatable_kernel; 93 __u8 min_alignment; 94 __u16 xloadflags; 95 __u32 cmdline_size; 96 __u32 hardware_subarch; 97 __u64 hardware_subarch_data; 98 __u32 payload_offset; 99 __u32 payload_length; 100 __u64 setup_data; 101 __u64 pref_address; 102 __u32 init_size; 103 __u32 handover_offset; 104 __u32 kernel_info_offset; 105} __attribute__((packed)); 106 107struct sys_desc_table { 108 __u16 length; 109 __u8 table[14]; 110}; 111 112/* Gleaned from OFW's set-parameters in cpu/x86/pc/linux.fth */ 113struct olpc_ofw_header { 114 __u32 ofw_magic; /* OFW signature */ 115 __u32 ofw_version; 116 __u32 cif_handler; /* callback into OFW */ 117 __u32 irq_desc_table; 118} __attribute__((packed)); 119 120struct efi_info { 121 __u32 efi_loader_signature; 122 __u32 efi_systab; 123 __u32 efi_memdesc_size; 124 __u32 efi_memdesc_version; 125 __u32 efi_memmap; 126 __u32 efi_memmap_size; 127 __u32 efi_systab_hi; 128 __u32 efi_memmap_hi; 129}; 130 131/* 132 * This is the maximum number of entries in struct boot_params::e820_table 133 * (the zeropage), which is part of the x86 boot protocol ABI: 134 */ 135#define E820_MAX_ENTRIES_ZEROPAGE 128 136 137/* 138 * The E820 memory region entry of the boot protocol ABI: 139 */ 140struct boot_e820_entry { 141 __u64 addr; 142 __u64 size; 143 __u32 type; 144} __attribute__((packed)); 145 146/* 147 * Smallest compatible version of jailhouse_setup_data required by this kernel. 148 */ 149#define JAILHOUSE_SETUP_REQUIRED_VERSION 1 150 151/* 152 * The boot loader is passing platform information via this Jailhouse-specific 153 * setup data structure. 154 */ 155struct jailhouse_setup_data { 156 struct { 157 __u16 version; 158 __u16 compatible_version; 159 } __attribute__((packed)) hdr; 160 struct { 161 __u16 pm_timer_address; 162 __u16 num_cpus; 163 __u64 pci_mmconfig_base; 164 __u32 tsc_khz; 165 __u32 apic_khz; 166 __u8 standard_ioapic; 167 __u8 cpu_ids[255]; 168 } __attribute__((packed)) v1; 169 struct { 170 __u32 flags; 171 } __attribute__((packed)) v2; 172} __attribute__((packed)); 173 174/* The so-called "zeropage" */ 175struct boot_params { 176 struct screen_info screen_info; /* 0x000 */ 177 struct apm_bios_info apm_bios_info; /* 0x040 */ 178 __u8 _pad2[4]; /* 0x054 */ 179 __u64 tboot_addr; /* 0x058 */ 180 struct ist_info ist_info; /* 0x060 */ 181 __u64 acpi_rsdp_addr; /* 0x070 */ 182 __u8 _pad3[8]; /* 0x078 */ 183 __u8 hd0_info[16]; /* obsolete! */ /* 0x080 */ 184 __u8 hd1_info[16]; /* obsolete! */ /* 0x090 */ 185 struct sys_desc_table sys_desc_table; /* obsolete! */ /* 0x0a0 */ 186 struct olpc_ofw_header olpc_ofw_header; /* 0x0b0 */ 187 __u32 ext_ramdisk_image; /* 0x0c0 */ 188 __u32 ext_ramdisk_size; /* 0x0c4 */ 189 __u32 ext_cmd_line_ptr; /* 0x0c8 */ 190 __u8 _pad4[116]; /* 0x0cc */ 191 struct edid_info edid_info; /* 0x140 */ 192 struct efi_info efi_info; /* 0x1c0 */ 193 __u32 alt_mem_k; /* 0x1e0 */ 194 __u32 scratch; /* Scratch field! */ /* 0x1e4 */ 195 __u8 e820_entries; /* 0x1e8 */ 196 __u8 eddbuf_entries; /* 0x1e9 */ 197 __u8 edd_mbr_sig_buf_entries; /* 0x1ea */ 198 __u8 kbd_status; /* 0x1eb */ 199 __u8 secure_boot; /* 0x1ec */ 200 __u8 _pad5[2]; /* 0x1ed */ 201 /* 202 * The sentinel is set to a nonzero value (0xff) in header.S. 203 * 204 * A bootloader is supposed to only take setup_header and put 205 * it into a clean boot_params buffer. If it turns out that 206 * it is clumsy or too generous with the buffer, it most 207 * probably will pick up the sentinel variable too. The fact 208 * that this variable then is still 0xff will let kernel 209 * know that some variables in boot_params are invalid and 210 * kernel should zero out certain portions of boot_params. 211 */ 212 __u8 sentinel; /* 0x1ef */ 213 __u8 _pad6[1]; /* 0x1f0 */ 214 struct setup_header hdr; /* setup header */ /* 0x1f1 */ 215 __u8 _pad7[0x290-0x1f1-sizeof(struct setup_header)]; 216 __u32 edd_mbr_sig_buffer[EDD_MBR_SIG_MAX]; /* 0x290 */ 217 struct boot_e820_entry e820_table[E820_MAX_ENTRIES_ZEROPAGE]; /* 0x2d0 */ 218 __u8 _pad8[48]; /* 0xcd0 */ 219 struct edd_info eddbuf[EDDMAXNR]; /* 0xd00 */ 220 __u8 _pad9[276]; /* 0xeec */ 221} __attribute__((packed)); 222 223/** 224 * enum x86_hardware_subarch - x86 hardware subarchitecture 225 * 226 * The x86 hardware_subarch and hardware_subarch_data were added as of the x86 227 * boot protocol 2.07 to help distinguish and support custom x86 boot 228 * sequences. This enum represents accepted values for the x86 229 * hardware_subarch. Custom x86 boot sequences (not X86_SUBARCH_PC) do not 230 * have or simply *cannot* make use of natural stubs like BIOS or EFI, the 231 * hardware_subarch can be used on the Linux entry path to revector to a 232 * subarchitecture stub when needed. This subarchitecture stub can be used to 233 * set up Linux boot parameters or for special care to account for nonstandard 234 * handling of page tables. 235 * 236 * These enums should only ever be used by x86 code, and the code that uses 237 * it should be well contained and compartamentalized. 238 * 239 * KVM and Xen HVM do not have a subarch as these are expected to follow 240 * standard x86 boot entries. If there is a genuine need for "hypervisor" type 241 * that should be considered separately in the future. Future guest types 242 * should seriously consider working with standard x86 boot stubs such as 243 * the BIOS or EFI boot stubs. 244 * 245 * WARNING: this enum is only used for legacy hacks, for platform features that 246 * are not easily enumerated or discoverable. You should not ever use 247 * this for new features. 248 * 249 * @X86_SUBARCH_PC: Should be used if the hardware is enumerable using standard 250 * PC mechanisms (PCI, ACPI) and doesn't need a special boot flow. 251 * @X86_SUBARCH_LGUEST: Used for x86 hypervisor demo, lguest, deprecated 252 * @X86_SUBARCH_XEN: Used for Xen guest types which follow the PV boot path, 253 * which start at asm startup_xen() entry point and later jump to the C 254 * xen_start_kernel() entry point. Both domU and dom0 type of guests are 255 * currently supportd through this PV boot path. 256 * @X86_SUBARCH_INTEL_MID: Used for Intel MID (Mobile Internet Device) platform 257 * systems which do not have the PCI legacy interfaces. 258 * @X86_SUBARCH_CE4100: Used for Intel CE media processor (CE4100) SoC 259 * for settop boxes and media devices, the use of a subarch for CE4100 260 * is more of a hack... 261 */ 262enum x86_hardware_subarch { 263 X86_SUBARCH_PC = 0, 264 X86_SUBARCH_LGUEST, 265 X86_SUBARCH_XEN, 266 X86_SUBARCH_INTEL_MID, 267 X86_SUBARCH_CE4100, 268 X86_NR_SUBARCHS, 269}; 270 271#endif /* __ASSEMBLY__ */ 272 273#endif /* _ASM_X86_BOOTPARAM_H */ 274