1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * MPC85xx setup and early boot code plus other random bits.
4 *
5 * Maintained by Kumar Gala (see MAINTAINERS for contact information)
6 *
7 * Copyright 2005, 2011-2012 Freescale Semiconductor Inc.
8 */
9
10#include <linux/stddef.h>
11#include <linux/kernel.h>
12#include <linux/init.h>
13#include <linux/errno.h>
14#include <linux/reboot.h>
15#include <linux/pci.h>
16#include <linux/kdev_t.h>
17#include <linux/major.h>
18#include <linux/console.h>
19#include <linux/delay.h>
20#include <linux/seq_file.h>
21#include <linux/initrd.h>
22#include <linux/interrupt.h>
23#include <linux/fsl_devices.h>
24#include <linux/of_platform.h>
25#include <linux/pgtable.h>
26
27#include <asm/page.h>
28#include <linux/atomic.h>
29#include <asm/time.h>
30#include <asm/io.h>
31#include <asm/machdep.h>
32#include <asm/ipic.h>
33#include <asm/pci-bridge.h>
34#include <asm/irq.h>
35#include <mm/mmu_decl.h>
36#include <asm/prom.h>
37#include <asm/udbg.h>
38#include <asm/mpic.h>
39#include <asm/i8259.h>
40
41#include <sysdev/fsl_soc.h>
42#include <sysdev/fsl_pci.h>
43
44#include "mpc85xx.h"
45
46/*
47 * The CDS board contains an FPGA/CPLD called "Cadmus", which collects
48 * various logic and performs system control functions.
49 * Here is the FPGA/CPLD register map.
50 */
51struct cadmus_reg {
52	u8 cm_ver;		/* Board version */
53	u8 cm_csr;		/* General control/status */
54	u8 cm_rst;		/* Reset control */
55	u8 cm_hsclk;	/* High speed clock */
56	u8 cm_hsxclk;	/* High speed clock extended */
57	u8 cm_led;		/* LED data */
58	u8 cm_pci;		/* PCI control/status */
59	u8 cm_dma;		/* DMA control */
60	u8 res[248];	/* Total 256 bytes */
61};
62
63static struct cadmus_reg *cadmus;
64
65#ifdef CONFIG_PCI
66
67#define ARCADIA_HOST_BRIDGE_IDSEL	17
68#define ARCADIA_2ND_BRIDGE_IDSEL	3
69
70static int mpc85xx_exclude_device(struct pci_controller *hose,
71				  u_char bus, u_char devfn)
72{
73	/* We explicitly do not go past the Tundra 320 Bridge */
74	if ((bus == 1) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL))
75		return PCIBIOS_DEVICE_NOT_FOUND;
76	if ((bus == 0) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL))
77		return PCIBIOS_DEVICE_NOT_FOUND;
78	else
79		return PCIBIOS_SUCCESSFUL;
80}
81
82static int mpc85xx_cds_restart(struct notifier_block *this,
83			       unsigned long mode, void *cmd)
84{
85	struct pci_dev *dev;
86	u_char tmp;
87
88	if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686,
89					NULL))) {
90
91		/* Use the VIA Super Southbridge to force a PCI reset */
92		pci_read_config_byte(dev, 0x47, &tmp);
93		pci_write_config_byte(dev, 0x47, tmp | 1);
94
95		/* Flush the outbound PCI write queues */
96		pci_read_config_byte(dev, 0x47, &tmp);
97
98		/*
99		 *  At this point, the hardware reset should have triggered.
100		 *  However, if it doesn't work for some mysterious reason,
101		 *  just fall through to the default reset below.
102		 */
103
104		pci_dev_put(dev);
105	}
106
107	/*
108	 *  If we can't find the VIA chip (maybe the P2P bridge is
109	 *  disabled) or the VIA chip reset didn't work, just return
110	 *  and let default reset sequence happen.
111	 */
112	return NOTIFY_DONE;
113}
114
115static int mpc85xx_cds_restart_register(void)
116{
117	static struct notifier_block restart_handler;
118
119	restart_handler.notifier_call = mpc85xx_cds_restart;
120	restart_handler.priority = 192;
121
122	return register_restart_handler(&restart_handler);
123}
124machine_arch_initcall(mpc85xx_cds, mpc85xx_cds_restart_register);
125
126
127static void __init mpc85xx_cds_pci_irq_fixup(struct pci_dev *dev)
128{
129	u_char c;
130	if (dev->vendor == PCI_VENDOR_ID_VIA) {
131		switch (dev->device) {
132		case PCI_DEVICE_ID_VIA_82C586_1:
133			/*
134			 * U-Boot does not set the enable bits
135			 * for the IDE device. Force them on here.
136			 */
137			pci_read_config_byte(dev, 0x40, &c);
138			c |= 0x03; /* IDE: Chip Enable Bits */
139			pci_write_config_byte(dev, 0x40, c);
140
141			/*
142			 * Since only primary interface works, force the
143			 * IDE function to standard primary IDE interrupt
144			 * w/ 8259 offset
145			 */
146			dev->irq = 14;
147			pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
148			break;
149		/*
150		 * Force legacy USB interrupt routing
151		 */
152		case PCI_DEVICE_ID_VIA_82C586_2:
153		/* There are two USB controllers.
154		 * Identify them by functon number
155		 */
156			if (PCI_FUNC(dev->devfn) == 3)
157				dev->irq = 11;
158			else
159				dev->irq = 10;
160			pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
161		default:
162			break;
163		}
164	}
165}
166
167static void skip_fake_bridge(struct pci_dev *dev)
168{
169	/* Make it an error to skip the fake bridge
170	 * in pci_setup_device() in probe.c */
171	dev->hdr_type = 0x7f;
172}
173DECLARE_PCI_FIXUP_EARLY(0x1957, 0x3fff, skip_fake_bridge);
174DECLARE_PCI_FIXUP_EARLY(0x3fff, 0x1957, skip_fake_bridge);
175DECLARE_PCI_FIXUP_EARLY(0xff3f, 0x5719, skip_fake_bridge);
176
177#define PCI_DEVICE_ID_IDT_TSI310	0x01a7
178
179/*
180 * Fix Tsi310 PCI-X bridge resource.
181 * Force the bridge to open a window from 0x0000-0x1fff in PCI I/O space.
182 * This allows legacy I/O(i8259, etc) on the VIA southbridge to be accessed.
183 */
184void mpc85xx_cds_fixup_bus(struct pci_bus *bus)
185{
186	struct pci_dev *dev = bus->self;
187	struct resource *res = bus->resource[0];
188
189	if (dev != NULL &&
190	    dev->vendor == PCI_VENDOR_ID_IBM &&
191	    dev->device == PCI_DEVICE_ID_IDT_TSI310) {
192		if (res) {
193			res->start = 0;
194			res->end   = 0x1fff;
195			res->flags = IORESOURCE_IO;
196			pr_info("mpc85xx_cds: PCI bridge resource fixup applied\n");
197			pr_info("mpc85xx_cds: %pR\n", res);
198		}
199	}
200
201	fsl_pcibios_fixup_bus(bus);
202}
203
204#ifdef CONFIG_PPC_I8259
205static void mpc85xx_8259_cascade_handler(struct irq_desc *desc)
206{
207	unsigned int cascade_irq = i8259_irq();
208
209	if (cascade_irq)
210		/* handle an interrupt from the 8259 */
211		generic_handle_irq(cascade_irq);
212
213	/* check for any interrupts from the shared IRQ line */
214	handle_fasteoi_irq(desc);
215}
216
217static irqreturn_t mpc85xx_8259_cascade_action(int irq, void *dev_id)
218{
219	return IRQ_HANDLED;
220}
221#endif /* PPC_I8259 */
222#endif /* CONFIG_PCI */
223
224static void __init mpc85xx_cds_pic_init(void)
225{
226	struct mpic *mpic;
227	mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN,
228			0, 256, " OpenPIC  ");
229	BUG_ON(mpic == NULL);
230	mpic_init(mpic);
231}
232
233#if defined(CONFIG_PPC_I8259) && defined(CONFIG_PCI)
234static int mpc85xx_cds_8259_attach(void)
235{
236	int ret;
237	struct device_node *np = NULL;
238	struct device_node *cascade_node = NULL;
239	int cascade_irq;
240
241	/* Initialize the i8259 controller */
242	for_each_node_by_type(np, "interrupt-controller")
243		if (of_device_is_compatible(np, "chrp,iic")) {
244			cascade_node = np;
245			break;
246		}
247
248	if (cascade_node == NULL) {
249		printk(KERN_DEBUG "Could not find i8259 PIC\n");
250		return -ENODEV;
251	}
252
253	cascade_irq = irq_of_parse_and_map(cascade_node, 0);
254	if (!cascade_irq) {
255		printk(KERN_ERR "Failed to map cascade interrupt\n");
256		return -ENXIO;
257	}
258
259	i8259_init(cascade_node, 0);
260	of_node_put(cascade_node);
261
262	/*
263	 *  Hook the interrupt to make sure desc->action is never NULL.
264	 *  This is required to ensure that the interrupt does not get
265	 *  disabled when the last user of the shared IRQ line frees their
266	 *  interrupt.
267	 */
268	ret = request_irq(cascade_irq, mpc85xx_8259_cascade_action,
269			  IRQF_SHARED | IRQF_NO_THREAD, "8259 cascade",
270			  cascade_node);
271	if (ret) {
272		printk(KERN_ERR "Failed to setup cascade interrupt\n");
273		return ret;
274	}
275
276	/* Success. Connect our low-level cascade handler. */
277	irq_set_handler(cascade_irq, mpc85xx_8259_cascade_handler);
278
279	return 0;
280}
281machine_device_initcall(mpc85xx_cds, mpc85xx_cds_8259_attach);
282
283#endif /* CONFIG_PPC_I8259 */
284
285static void mpc85xx_cds_pci_assign_primary(void)
286{
287#ifdef CONFIG_PCI
288	struct device_node *np;
289
290	if (fsl_pci_primary)
291		return;
292
293	/*
294	 * MPC85xx_CDS has ISA bridge but unfortunately there is no
295	 * isa node in device tree. We now looking for i8259 node as
296	 * a workaround for such a broken device tree. This routine
297	 * is for complying to all device trees.
298	 */
299	np = of_find_node_by_name(NULL, "i8259");
300	while ((fsl_pci_primary = of_get_parent(np))) {
301		of_node_put(np);
302		np = fsl_pci_primary;
303
304		if ((of_device_is_compatible(np, "fsl,mpc8540-pci") ||
305		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) &&
306		    of_device_is_available(np))
307			return;
308	}
309#endif
310}
311
312/*
313 * Setup the architecture
314 */
315static void __init mpc85xx_cds_setup_arch(void)
316{
317	struct device_node *np;
318	int cds_pci_slot;
319
320	if (ppc_md.progress)
321		ppc_md.progress("mpc85xx_cds_setup_arch()", 0);
322
323	np = of_find_compatible_node(NULL, NULL, "fsl,mpc8548cds-fpga");
324	if (!np) {
325		pr_err("Could not find FPGA node.\n");
326		return;
327	}
328
329	cadmus = of_iomap(np, 0);
330	of_node_put(np);
331	if (!cadmus) {
332		pr_err("Fail to map FPGA area.\n");
333		return;
334	}
335
336	if (ppc_md.progress) {
337		char buf[40];
338		cds_pci_slot = ((in_8(&cadmus->cm_csr) >> 6) & 0x3) + 1;
339		snprintf(buf, 40, "CDS Version = 0x%x in slot %d\n",
340				in_8(&cadmus->cm_ver), cds_pci_slot);
341		ppc_md.progress(buf, 0);
342	}
343
344#ifdef CONFIG_PCI
345	ppc_md.pci_irq_fixup = mpc85xx_cds_pci_irq_fixup;
346	ppc_md.pci_exclude_device = mpc85xx_exclude_device;
347#endif
348
349	mpc85xx_cds_pci_assign_primary();
350	fsl_pci_assign_primary();
351}
352
353static void mpc85xx_cds_show_cpuinfo(struct seq_file *m)
354{
355	uint pvid, svid, phid1;
356
357	pvid = mfspr(SPRN_PVR);
358	svid = mfspr(SPRN_SVR);
359
360	seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
361	seq_printf(m, "Machine\t\t: MPC85xx CDS (0x%x)\n",
362			in_8(&cadmus->cm_ver));
363	seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
364	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
365
366	/* Display cpu Pll setting */
367	phid1 = mfspr(SPRN_HID1);
368	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
369}
370
371
372/*
373 * Called very early, device-tree isn't unflattened
374 */
375static int __init mpc85xx_cds_probe(void)
376{
377	return of_machine_is_compatible("MPC85xxCDS");
378}
379
380machine_arch_initcall(mpc85xx_cds, mpc85xx_common_publish_devices);
381
382define_machine(mpc85xx_cds) {
383	.name		= "MPC85xx CDS",
384	.probe		= mpc85xx_cds_probe,
385	.setup_arch	= mpc85xx_cds_setup_arch,
386	.init_IRQ	= mpc85xx_cds_pic_init,
387	.show_cpuinfo	= mpc85xx_cds_show_cpuinfo,
388	.get_irq	= mpic_get_irq,
389#ifdef CONFIG_PCI
390	.pcibios_fixup_bus	= mpc85xx_cds_fixup_bus,
391	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
392#endif
393	.calibrate_decr = generic_calibrate_decr,
394	.progress	= udbg_progress,
395};
396