1// SPDX-License-Identifier: GPL-2.0 2/***************************************************************************/ 3 4/* 5 * m520x.c -- platform support for ColdFire 520x based boards 6 * 7 * Copyright (C) 2005, Freescale (www.freescale.com) 8 * Copyright (C) 2005, Intec Automation (mike@steroidmicros.com) 9 * Copyright (C) 1999-2007, Greg Ungerer (gerg@snapgear.com) 10 * Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com) 11 */ 12 13/***************************************************************************/ 14 15#include <linux/kernel.h> 16#include <linux/param.h> 17#include <linux/init.h> 18#include <linux/io.h> 19#include <asm/machdep.h> 20#include <asm/coldfire.h> 21#include <asm/mcfsim.h> 22#include <asm/mcfuart.h> 23#include <asm/mcfclk.h> 24 25/***************************************************************************/ 26 27DEFINE_CLK(0, "flexbus", 2, MCF_CLK); 28DEFINE_CLK(0, "fec.0", 12, MCF_CLK); 29DEFINE_CLK(0, "edma", 17, MCF_CLK); 30DEFINE_CLK(0, "intc.0", 18, MCF_CLK); 31DEFINE_CLK(0, "iack.0", 21, MCF_CLK); 32DEFINE_CLK(0, "imx1-i2c.0", 22, MCF_CLK); 33DEFINE_CLK(0, "mcfqspi.0", 23, MCF_CLK); 34DEFINE_CLK(0, "mcfuart.0", 24, MCF_BUSCLK); 35DEFINE_CLK(0, "mcfuart.1", 25, MCF_BUSCLK); 36DEFINE_CLK(0, "mcfuart.2", 26, MCF_BUSCLK); 37DEFINE_CLK(0, "mcftmr.0", 28, MCF_CLK); 38DEFINE_CLK(0, "mcftmr.1", 29, MCF_CLK); 39DEFINE_CLK(0, "mcftmr.2", 30, MCF_CLK); 40DEFINE_CLK(0, "mcftmr.3", 31, MCF_CLK); 41 42DEFINE_CLK(0, "mcfpit.0", 32, MCF_CLK); 43DEFINE_CLK(0, "mcfpit.1", 33, MCF_CLK); 44DEFINE_CLK(0, "mcfeport.0", 34, MCF_CLK); 45DEFINE_CLK(0, "mcfwdt.0", 35, MCF_CLK); 46DEFINE_CLK(0, "pll.0", 36, MCF_CLK); 47DEFINE_CLK(0, "sys.0", 40, MCF_BUSCLK); 48DEFINE_CLK(0, "gpio.0", 41, MCF_BUSCLK); 49DEFINE_CLK(0, "sdram.0", 42, MCF_CLK); 50 51struct clk *mcf_clks[] = { 52 &__clk_0_2, /* flexbus */ 53 &__clk_0_12, /* fec.0 */ 54 &__clk_0_17, /* edma */ 55 &__clk_0_18, /* intc.0 */ 56 &__clk_0_21, /* iack.0 */ 57 &__clk_0_22, /* imx1-i2c.0 */ 58 &__clk_0_23, /* mcfqspi.0 */ 59 &__clk_0_24, /* mcfuart.0 */ 60 &__clk_0_25, /* mcfuart.1 */ 61 &__clk_0_26, /* mcfuart.2 */ 62 &__clk_0_28, /* mcftmr.0 */ 63 &__clk_0_29, /* mcftmr.1 */ 64 &__clk_0_30, /* mcftmr.2 */ 65 &__clk_0_31, /* mcftmr.3 */ 66 67 &__clk_0_32, /* mcfpit.0 */ 68 &__clk_0_33, /* mcfpit.1 */ 69 &__clk_0_34, /* mcfeport.0 */ 70 &__clk_0_35, /* mcfwdt.0 */ 71 &__clk_0_36, /* pll.0 */ 72 &__clk_0_40, /* sys.0 */ 73 &__clk_0_41, /* gpio.0 */ 74 &__clk_0_42, /* sdram.0 */ 75 NULL, 76}; 77 78static struct clk * const enable_clks[] __initconst = { 79 &__clk_0_2, /* flexbus */ 80 &__clk_0_18, /* intc.0 */ 81 &__clk_0_21, /* iack.0 */ 82 &__clk_0_24, /* mcfuart.0 */ 83 &__clk_0_25, /* mcfuart.1 */ 84 &__clk_0_26, /* mcfuart.2 */ 85 86 &__clk_0_32, /* mcfpit.0 */ 87 &__clk_0_33, /* mcfpit.1 */ 88 &__clk_0_34, /* mcfeport.0 */ 89 &__clk_0_36, /* pll.0 */ 90 &__clk_0_40, /* sys.0 */ 91 &__clk_0_41, /* gpio.0 */ 92 &__clk_0_42, /* sdram.0 */ 93}; 94 95static struct clk * const disable_clks[] __initconst = { 96 &__clk_0_12, /* fec.0 */ 97 &__clk_0_17, /* edma */ 98 &__clk_0_22, /* imx1-i2c.0 */ 99 &__clk_0_23, /* mcfqspi.0 */ 100 &__clk_0_28, /* mcftmr.0 */ 101 &__clk_0_29, /* mcftmr.1 */ 102 &__clk_0_30, /* mcftmr.2 */ 103 &__clk_0_31, /* mcftmr.3 */ 104 &__clk_0_35, /* mcfwdt.0 */ 105}; 106 107 108static void __init m520x_clk_init(void) 109{ 110 unsigned i; 111 112 /* make sure these clocks are enabled */ 113 for (i = 0; i < ARRAY_SIZE(enable_clks); ++i) 114 __clk_init_enabled(enable_clks[i]); 115 /* make sure these clocks are disabled */ 116 for (i = 0; i < ARRAY_SIZE(disable_clks); ++i) 117 __clk_init_disabled(disable_clks[i]); 118} 119 120/***************************************************************************/ 121 122static void __init m520x_qspi_init(void) 123{ 124#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) 125 u16 par; 126 /* setup Port QS for QSPI with gpio CS control */ 127 writeb(0x3f, MCF_GPIO_PAR_QSPI); 128 /* make U1CTS and U2RTS gpio for cs_control */ 129 par = readw(MCF_GPIO_PAR_UART); 130 par &= 0x00ff; 131 writew(par, MCF_GPIO_PAR_UART); 132#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */ 133} 134 135/***************************************************************************/ 136 137static void __init m520x_i2c_init(void) 138{ 139#if IS_ENABLED(CONFIG_I2C_IMX) 140 u8 par; 141 142 /* setup Port FECI2C Pin Assignment Register for I2C */ 143 /* set PAR_SCL to SCL and PAR_SDA to SDA */ 144 par = readb(MCF_GPIO_PAR_FECI2C); 145 par |= 0x0f; 146 writeb(par, MCF_GPIO_PAR_FECI2C); 147#endif /* IS_ENABLED(CONFIG_I2C_IMX) */ 148} 149 150/***************************************************************************/ 151 152static void __init m520x_uarts_init(void) 153{ 154 u16 par; 155 u8 par2; 156 157 /* UART0 and UART1 GPIO pin setup */ 158 par = readw(MCF_GPIO_PAR_UART); 159 par |= MCF_GPIO_PAR_UART_PAR_UTXD0 | MCF_GPIO_PAR_UART_PAR_URXD0; 160 par |= MCF_GPIO_PAR_UART_PAR_UTXD1 | MCF_GPIO_PAR_UART_PAR_URXD1; 161 writew(par, MCF_GPIO_PAR_UART); 162 163 /* UART1 GPIO pin setup */ 164 par2 = readb(MCF_GPIO_PAR_FECI2C); 165 par2 &= ~0x0F; 166 par2 |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 | 167 MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2; 168 writeb(par2, MCF_GPIO_PAR_FECI2C); 169} 170 171/***************************************************************************/ 172 173static void __init m520x_fec_init(void) 174{ 175 u8 v; 176 177 /* Set multi-function pins to ethernet mode */ 178 v = readb(MCF_GPIO_PAR_FEC); 179 writeb(v | 0xf0, MCF_GPIO_PAR_FEC); 180 181 v = readb(MCF_GPIO_PAR_FECI2C); 182 writeb(v | 0x0f, MCF_GPIO_PAR_FECI2C); 183} 184 185/***************************************************************************/ 186 187void __init config_BSP(char *commandp, int size) 188{ 189 mach_sched_init = hw_timer_init; 190 m520x_clk_init(); 191 m520x_uarts_init(); 192 m520x_fec_init(); 193 m520x_qspi_init(); 194 m520x_i2c_init(); 195} 196 197/***************************************************************************/ 198