xref: /kernel/linux/linux-5.10/arch/loongarch/Kconfig (revision 8c2ecf20)

# SPDX-License-Identifier: GPL-2.0
config LOONGARCH
	bool
	default y
	select ACPI_MCFG if ACPI
	select ACPI_PPTT if ACPI
	select ACPI_SYSTEM_POWER_STATES_SUPPORT	if ACPI
	select ARCH_BINFMT_ELF_STATE
	select ARCH_HAS_ACPI_TABLE_UPGRADE	if ACPI
	select ARCH_HAS_CPU_FINALIZE_INIT
	select ARCH_HAS_FORTIFY_SOURCE
	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
	select ARCH_HAS_PTE_SPECIAL if !32BIT
	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
	select ARCH_INLINE_READ_LOCK if !PREEMPTION
	select ARCH_INLINE_READ_LOCK_BH if !PREEMPTION
	select ARCH_INLINE_READ_LOCK_IRQ if !PREEMPTION
	select ARCH_INLINE_READ_LOCK_IRQSAVE if !PREEMPTION
	select ARCH_INLINE_READ_UNLOCK if !PREEMPTION
	select ARCH_INLINE_READ_UNLOCK_BH if !PREEMPTION
	select ARCH_INLINE_READ_UNLOCK_IRQ if !PREEMPTION
	select ARCH_INLINE_READ_UNLOCK_IRQRESTORE if !PREEMPTION
	select ARCH_INLINE_WRITE_LOCK if !PREEMPTION
	select ARCH_INLINE_WRITE_LOCK_BH if !PREEMPTION
	select ARCH_INLINE_WRITE_LOCK_IRQ if !PREEMPTION
	select ARCH_INLINE_WRITE_LOCK_IRQSAVE if !PREEMPTION
	select ARCH_INLINE_WRITE_UNLOCK if !PREEMPTION
	select ARCH_INLINE_WRITE_UNLOCK_BH if !PREEMPTION
	select ARCH_INLINE_WRITE_UNLOCK_IRQ if !PREEMPTION
	select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE if !PREEMPTION
	select ARCH_INLINE_SPIN_TRYLOCK if !PREEMPTION
	select ARCH_INLINE_SPIN_TRYLOCK_BH if !PREEMPTION
	select ARCH_INLINE_SPIN_LOCK if !PREEMPTION
	select ARCH_INLINE_SPIN_LOCK_BH if !PREEMPTION
	select ARCH_INLINE_SPIN_LOCK_IRQ if !PREEMPTION
	select ARCH_INLINE_SPIN_LOCK_IRQSAVE if !PREEMPTION
	select ARCH_INLINE_SPIN_UNLOCK if !PREEMPTION
	select ARCH_INLINE_SPIN_UNLOCK_BH if !PREEMPTION
	select ARCH_INLINE_SPIN_UNLOCK_IRQ if !PREEMPTION
	select ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE if !PREEMPTION
	select ARCH_KEEP_MEMBLOCK
	select ARCH_SUPPORTS_ACPI
	select ARCH_SUPPORTS_NUMA_BALANCING
	select ARCH_SUPPORTS_UPROBES
	select ARCH_USE_BUILTIN_BSWAP
	select ARCH_USE_CMPXCHG_LOCKREF if 64BIT
	select ARCH_USE_QUEUED_RWLOCKS
	select ARCH_USE_QUEUED_SPINLOCKS
	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT
	select ARCH_WANT_LD_ORPHAN_WARN
	select BUILDTIME_TABLE_SORT
	select COMMON_CLK
	select CPU_PM
	select GENERIC_ATOMIC64 if !64BIT
	select GENERIC_CLOCKEVENTS
	select GENERIC_CMOS_UPDATE
	select GENERIC_CPU_AUTOPROBE
	select GENERIC_ENTRY
	select GENERIC_FIND_FIRST_BIT
	select GENERIC_GETTIMEOFDAY
	select GENERIC_IOREMAP if !ARCH_IOREMAP
	select GENERIC_IRQ_MULTI_HANDLER
	select GENERIC_IRQ_PROBE
	select GENERIC_IRQ_SHOW
	select GENERIC_LIB_ASHLDI3
	select GENERIC_LIB_ASHRDI3
	select GENERIC_LIB_CMPDI2
	select GENERIC_LIB_LSHRDI3
	select GENERIC_LIB_UCMPDI2
	select GENERIC_LIB_DEVMEM_IS_ALLOWED
	select GENERIC_PCI_IOMAP
	select GENERIC_SCHED_CLOCK
	select GENERIC_SMP_IDLE_THREAD
	select GENERIC_STRNCPY_FROM_USER
	select GENERIC_STRNLEN_USER
	select GENERIC_TIME_VSYSCALL
	select GENERIC_VDSO_TIME_NS
	select HANDLE_DOMAIN_IRQ
	select HAVE_ARCH_AUDITSYSCALL
	select HAVE_ARCH_JUMP_LABEL
	select HAVE_ARCH_JUMP_LABEL_RELATIVE
	select HAVE_ARCH_KASAN if 64BIT
	select HAVE_ARCH_KGDB
	select HAVE_ARCH_MMAP_RND_BITS if MMU
	select HAVE_ARCH_SECCOMP
	select HAVE_ARCH_SECCOMP_FILTER
	select HAVE_ARCH_TRACEHOOK
	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
	select HAVE_ASM_MODVERSIONS
	select HAVE_CONTEXT_TRACKING
	select HAVE_COPY_THREAD_TLS
	select HAVE_C_RECORDMCOUNT
	select HAVE_DEBUG_KMEMLEAK
	select HAVE_DEBUG_STACKOVERFLOW
	select HAVE_DMA_CONTIGUOUS
	select HAVE_DYNAMIC_FTRACE
	select HAVE_DYNAMIC_FTRACE_WITH_REGS
	select HAVE_EBPF_JIT if 64BIT
	select HAVE_EFFICIENT_UNALIGNED_ACCESS if !ARCH_STRICT_ALIGN
	select HAVE_EXIT_THREAD
	select HAVE_FAST_GUP
	select HAVE_FTRACE_MCOUNT_RECORD
	select HAVE_FUNCTION_GRAPH_TRACER
	select HAVE_FUNCTION_TRACER
	select HAVE_FUTEX_CMPXCHG if FUTEX
	select HAVE_GENERIC_VDSO
	select HAVE_IOREMAP_PROT
	select HAVE_IRQ_EXIT_ON_IRQ_STACK
	select HAVE_IRQ_TIME_ACCOUNTING
	select HAVE_KPROBES
	select HAVE_KPROBES_ON_FTRACE
	select HAVE_KRETPROBES
	select HAVE_LIVEPATCH
	select HAVE_MEMBLOCK
	select HAVE_MEMBLOCK_NODE_MAP
	select HAVE_MOD_ARCH_SPECIFIC
	select HAVE_NMI
	select HAVE_PERF_EVENTS
	select HAVE_PERF_REGS
	select HAVE_PERF_USER_STACK_DUMP
	select HAVE_REGS_AND_STACK_ACCESS_API
	select HAVE_RSEQ
	select HAVE_STACKPROTECTOR
	select HAVE_STACK_VALIDATION
	select HAVE_SYSCALL_TRACEPOINTS
	select HAVE_TIF_NOHZ
	select HAVE_VIRT_CPU_ACCOUNTING_GEN if 64BIT || !SMP
	select IRQ_FORCED_THREADING
	select MODULES_USE_ELF_RELA if MODULES
	select OF
	select OF_EARLY_FLATTREE
	select PCI_DOMAINS_GENERIC if PCI
	select PCI_ECAM if ACPI
	select PCI_MSI_ARCH_FALLBACKS
	select PERF_USE_VMALLOC
	select RTC_LIB
	select SYSCTL_ARCH_UNALIGN_ALLOW
	select SYSCTL_ARCH_UNALIGN_NO_WARN
	select SYSCTL_EXCEPTION_TRACE
	select USER_STACKTRACE_SUPPORT

menu "Machine selection"

choice
	prompt "System type"
	default MACH_LOONGSON64

config MACH_LOONGSON64
	bool "Loongson 64-bit family of machines"
	select ARCH_SPARSEMEM_ENABLE
	select ARCH_MIGHT_HAVE_PC_PARPORT
	select ARCH_MIGHT_HAVE_PC_SERIO
	select HAVE_PCI
	select PCI
	select IRQ_LOONGARCH_CPU
	select NR_CPUS_DEFAULT_64
	select SPARSE_IRQ
	select SYS_HAS_CPU_LOONGSON64
	select SYS_SUPPORTS_SMP
	select SYS_SUPPORTS_ZBOOT
	select SYS_SUPPORTS_HOTPLUG_CPU
	select SYS_SUPPORTS_NUMA
	select SYS_SUPPORTS_64BIT_KERNEL
	select SYS_SUPPORTS_HIGHMEM
	select SYS_SUPPORTS_RELOCATABLE
	select ZONE_DMA32
	select USE_OF
	select BUILTIN_DTB
	help
	  This enables the support of Loongson 64-bit family of machines. These
	  machines are based on new Loongson-3 processors (Old Loongson is MIPS
	  compatible, while new Loongson is based on LoongArch ISA).

endchoice

endmenu

config GENERIC_HWEIGHT
	bool
	default y

config GENERIC_CALIBRATE_DELAY
	bool
	default y

config SCHED_OMIT_FRAME_POINTER
	bool
	default y

config AS_HAS_EXPLICIT_RELOCS
	def_bool $(as-instr,x:pcalau12i \$t0$(comma)%pc_hi20(x))

config ARCH_SUPPORTS_UPROBES
	bool

config SYS_SUPPORTS_HOTPLUG_CPU
	bool

config GENERIC_CSUM
	def_bool y

config SYS_SUPPORTS_RELOCATABLE
	bool
	help
	 Selected if the platform supports relocating the kernel.

config SYS_SUPPORTS_HUGETLBFS
	def_bool y

config L1_CACHE_SHIFT
	int
	default "6"

menu "CPU selection"

choice
	prompt "CPU type"
	default CPU_LOONGSON64

config CPU_LOONGSON64
	bool "Loongson 64-bit CPU"
	depends on SYS_HAS_CPU_LOONGSON64
	select CPU_SUPPORTS_64BIT_KERNEL
	select CPU_SUPPORTS_HIGHMEM
	select CPU_SUPPORTS_LSX
	select CPU_SUPPORTS_LASX
	select GPIOLIB
	select SWIOTLB
	select HAVE_KVM
	select ARCH_SUPPORTS_ATOMIC_RMW
	help
	  The Loongson 64-bit processor implements the LoongArch64 (the 64-bit
	  version of LoongArch) instruction set.

endchoice

config SYS_SUPPORTS_ZBOOT
	bool
	select HAVE_KERNEL_GZIP
	select HAVE_KERNEL_BZIP2
	select HAVE_KERNEL_LZ4
	select HAVE_KERNEL_LZMA
	select HAVE_KERNEL_LZO
	select HAVE_KERNEL_XZ
	select HAVE_KERNEL_ZSTD

config SYS_HAS_CPU_LOONGSON64
	bool

endmenu

config SYS_SUPPORTS_32BIT_KERNEL
	bool
config SYS_SUPPORTS_64BIT_KERNEL
	bool
config CPU_SUPPORTS_32BIT_KERNEL
	bool
config CPU_SUPPORTS_64BIT_KERNEL
	bool
config HARDWARE_WATCHPOINTS
	bool
	default y

menu "Kernel type and options"

choice
	prompt "Kernel code model"
	help
	  You should only select this option if you have a workload that
	  actually benefits from 64-bit processing or if your machine has
	  large memory.  You will only be presented a single option in this
	  menu if your system does not support both 32-bit and 64-bit kernels.

config 32BIT
	bool "32-bit kernel"
	depends on CPU_SUPPORTS_32BIT_KERNEL && SYS_SUPPORTS_32BIT_KERNEL
	help
	  Select this option if you want to build a 32-bit kernel.

config 64BIT
	bool "64-bit kernel"
	depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL
	help
	  Select this option if you want to build a 64-bit kernel.

endchoice

config FIX_EARLYCON_MEM
	def_bool y

config PAGE_SIZE_4KB
	bool

config PAGE_SIZE_16KB
	bool

config PAGE_SIZE_64KB
	bool

config PGTABLE_2LEVEL
	bool

config PGTABLE_3LEVEL
	bool

config PGTABLE_4LEVEL
	bool

config PGTABLE_LEVELS
	int
	default 2 if PGTABLE_2LEVEL
	default 3 if PGTABLE_3LEVEL
	default 4 if PGTABLE_4LEVEL

choice
	prompt "Page Table Layout"
	default 16KB_2LEVEL if 32BIT
	default 16KB_3LEVEL if 64BIT
	help
	  Allows choosing the page table layout, which is a combination
	  of page size and page table levels. The size of virtual memory
	  address space are determined by the page table layout.

config 4KB_3LEVEL
	bool "4KB with 3 levels"
	select PAGE_SIZE_4KB
	select PGTABLE_3LEVEL
	help
	  This option selects 4KB page size with 3 level page tables, which
	  support a maximum of 39 bits of application virtual memory.

config 4KB_4LEVEL
	bool "4KB with 4 levels"
	select PAGE_SIZE_4KB
	select PGTABLE_4LEVEL
	help
	  This option selects 4KB page size with 4 level page tables, which
	  support a maximum of 48 bits of application virtual memory.

config 16KB_2LEVEL
	bool "16KB with 2 levels"
	select PAGE_SIZE_16KB
	select PGTABLE_2LEVEL
	help
	  This option selects 16KB page size with 2 level page tables, which
	  support a maximum of 36 bits of application virtual memory.

config 16KB_3LEVEL
	bool "16KB with 3 levels"
	select PAGE_SIZE_16KB
	select PGTABLE_3LEVEL
	help
	  This option selects 16KB page size with 3 level page tables, which
	  support a maximum of 47 bits of application virtual memory.

config 64KB_2LEVEL
	bool "64KB with 2 levels"
	select PAGE_SIZE_64KB
	select PGTABLE_2LEVEL
	help
	  This option selects 64KB page size with 2 level page tables, which
	  support a maximum of 42 bits of application virtual memory.

config 64KB_3LEVEL
	bool "64KB with 3 levels"
	select PAGE_SIZE_64KB
	select PGTABLE_3LEVEL
	help
	  This option selects 64KB page size with 3 level page tables, which
	  support a maximum of 55 bits of application virtual memory.

endchoice

config FORCE_MAX_ZONEORDER
	int "Maximum zone order"
	range 14 64 if PAGE_SIZE_64KB
	default "14" if PAGE_SIZE_64KB
	range 12 64 if PAGE_SIZE_16KB
	default "12" if PAGE_SIZE_16KB
	range 11 64
	default "11"
	help
	  The kernel memory allocator divides physically contiguous memory
	  blocks into "zones", where each zone is a power of two number of
	  pages.  This option selects the largest power of two that the kernel
	  keeps in the memory allocator.  If you need to allocate very large
	  blocks of physically contiguous memory, then you may need to
	  increase this value.

	  This config option is actually maximum order plus one. For example,
	  a value of 11 means that the largest free memory block is 2^10 pages.

	  The page size is not necessarily 4KB.  Keep this in mind
	  when choosing a value for this option.

config CPU_HAS_PREFETCH
	bool
	default y

config CPU_HAS_FPU
	bool
	default y

config CPU_HAS_LSX
	bool "Support for the Loongson SIMD Extension"
	depends on CPU_SUPPORTS_LSX
	depends on 64BIT
	help
	  Loongson SIMD Extension (LSX) introduces 128 bit wide vector registers
	  and a set of SIMD instructions to operate on them. When this option
	  is enabled the kernel will support allocating & switching LSX
	  vector register contexts. If you know that your kernel will only be
	  running on CPUs which do not support LSX or that your userland will
	  not be making use of it then you may wish to say N here to reduce
	  the size & complexity of your kernel.

	  If unsure, say Y.

config CPU_HAS_LASX
	bool "Support for the Loongson Advanced SIMD Extension"
	depends on CPU_SUPPORTS_LASX
	depends on 64BIT && CPU_HAS_LSX
	help
	  Loongson Advanced SIMD Extension is 256 bit wide SIMD extension.

	  If unsure, say Y.

config CPU_HAS_LBT
	bool "Support for the Loongson Binary Tranlatition"

#
# - Highmem only makes sense for the 32-bit kernel.
# - We use SYS_SUPPORTS_HIGHMEM to offer highmem only for systems where we
#   know they might have memory configurations that could make use of highmem
#   support.
#
config HIGHMEM
	bool "High Memory Support"
	depends on 32BIT && CPU_SUPPORTS_HIGHMEM && SYS_SUPPORTS_HIGHMEM

config CPU_SUPPORTS_HIGHMEM
	bool

config SYS_SUPPORTS_HIGHMEM
	bool

config CPU_SUPPORTS_LSX
	bool

config CPU_SUPPORTS_LASX
	bool

config ARCH_SELECT_MEMORY_MODEL
	def_bool y

config ARCH_FLATMEM_ENABLE
	def_bool y
	depends on !NUMA

config ARCH_SPARSEMEM_ENABLE
	def_bool y
	select SPARSEMEM_VMEMMAP_ENABLE
	help
	  Say Y to support efficient handling of sparse physical memory,
	  for architectures which are either NUMA (Non-Uniform Memory Access)
	  or have huge holes in the physical address space for other reasons.
	  See <file:Documentation/vm/numa.rst> for more.

config NUMA
	bool "NUMA Support"
	depends on SYS_SUPPORTS_NUMA
	select ACPI_NUMA if ACPI
	help
	  Say Y to compile the kernel with NUMA (Non-Uniform Memory Access)
	  support.  This option improves performance on systems with more
	  than one NUMA node; on single node systems it is generally better
	  to leave it disabled.

config SYS_SUPPORTS_NUMA
	bool

config RELOCATABLE
	bool "Relocatable kernel"
	depends on SYS_SUPPORTS_RELOCATABLE
	help
	  This builds a kernel image that retains relocation information
	  so it can be loaded someplace besides the default 1MB.
	  The relocations make the kernel binary about 15% larger,
	  but are discarded at runtime

config RELOCATION_TABLE_SIZE
	hex "Relocation table size"
	depends on RELOCATABLE
	range 0x0 0x01000000
	default "0x00200000"
	help
	  A table of relocation data will be appended to the kernel binary
	  and parsed at boot to fix up the relocated kernel.

	  This option allows the amount of space reserved for the table to be
	  adjusted, although the default of 1Mb should be ok in most cases.

	  The build will fail and a valid size suggested if this is too small.

	  If unsure, leave at the default value.

config RANDOMIZE_BASE
	bool "Randomize the address of the kernel image"
	depends on RELOCATABLE
	help
	   Randomizes the physical and virtual address at which the
	   kernel image is loaded, as a security feature that
	   deters exploit attempts relying on knowledge of the location
	   of kernel internals.

	   Entropy is generated using any coprocessor 0 registers available.

	   The kernel will be offset by up to RANDOMIZE_BASE_MAX_OFFSET.

	   If unsure, say N.

config RANDOMIZE_BASE_MAX_OFFSET
	hex "Maximum kASLR offset" if EXPERT
	depends on RANDOMIZE_BASE
	range 0x0 0x40000000 if 64BIT
	range 0x0 0x08000000
	default "0x01000000"
	help
	  When kASLR is active, this provides the maximum offset that will
	  be applied to the kernel image. It should be set according to the
	  amount of physical RAM available in the target system.

	  This is limited by the size of the lower address memory, 256MB.

config NODES_SHIFT
	int
	default "6"
	depends on NEED_MULTIPLE_NODES

config USE_PERCPU_NUMA_NODE_ID
	def_bool y
	depends on NUMA

config HAVE_SETUP_PER_CPU_AREA
	def_bool y
	depends on NUMA

config NEED_PER_CPU_EMBED_FIRST_CHUNK
	def_bool y
	depends on NUMA

config NEED_PER_CPU_PAGE_FIRST_CHUNK
	def_bool y
	depends on NUMA

config CMDLINE
	string "Built-in kernel command line"
	help
	  For most platforms, the arguments for the kernel's command line
	  are provided at run-time, during boot. However, there are cases
	  where either no arguments are being provided or the provided
	  arguments are insufficient or even invalid.

	  When that occurs, it is possible to define a built-in command
	  line here and choose how the kernel should use it later on.

choice
	prompt "Kernel command line type"
	default CMDLINE_BOOTLOADER
	help
	  Choose how the kernel will handle the provided built-in command
	  line.

config CMDLINE_BOOTLOADER
	bool "Use bootloader kernel arguments if available"
	help
	  Prefer the command-line passed by the boot loader if available.
	  Use the built-in command line as fallback in case we get nothing
	  during boot. This is the default behaviour.

config CMDLINE_EXTEND
	bool "Use built-in to extend bootloader kernel arguments"
	help
	  The command-line arguments provided during boot will be
	  appended to the built-in command line. This is useful in
	  cases where the provided arguments are insufficient and
	  you don't want to or cannot modify them.

config CMDLINE_FORCE
	bool "Always use the built-in kernel command string"
	help
	  Always use the built-in command line, even if we get one during
	  boot. This is useful in case you need to override the provided
	  command line on systems where you don't have or want control
	  over it.

endchoice

config DMI
	bool "Enable DMI scanning"
	select DMI_SCAN_MACHINE_NON_EFI_FALLBACK
	default y
	help
	  This enables SMBIOS/DMI feature for systems, and scanning of
	  DMI to identify machine quirks.

config EFI
	bool "EFI runtime service support"
	select UCS2_STRING
	select EFI_RUNTIME_WRAPPERS
	help
	  This enables the kernel to use EFI runtime services that are
	  available (such as the EFI variable services).

config EFI_STUB
	bool "EFI stub support"
	default y
	depends on EFI
	select EFI_GENERIC_STUB
	help
	  This kernel feature allows a vmlinuz.efi to be loaded directly
	  by EFI firmware without the use of a bootloader.

config SCHED_SMT
	bool "SMT scheduler support"
	default y
	help
	  Improves scheduler's performance when there are multiple
	  threads in one physical core.

config SMP
	bool "Multi-Processing support"
	depends on SYS_SUPPORTS_SMP
	help
	  This enables support for systems with more than one CPU. If you have
	  a system with only one CPU, say N. If you have a system with more
	  than one CPU, say Y.

	  If you say N here, the kernel will run on uni- and multiprocessor
	  machines, but will use only one CPU of a multiprocessor machine. If
	  you say Y here, the kernel will run on many, but not all,
	  uniprocessor machines. On a uniprocessor machine, the kernel
	  will run faster if you say N here.

	  See also the SMP-HOWTO available at <http://www.tldp.org/docs.html#howto>.

	  If you don't know what to do here, say N.

config HOTPLUG_CPU
	bool "Support for hot-pluggable CPUs"
	select GENERIC_IRQ_MIGRATION
	depends on SMP && SYS_SUPPORTS_HOTPLUG_CPU
	help
	  Say Y here to allow turning CPUs off and on. CPUs can be
	  controlled through /sys/devices/system/cpu.
	  (Note: power management support will enable this option
	    automatically on SMP systems. )
	  Say N if you want to disable CPU hotplug.

config SYS_SUPPORTS_SMP
	bool

config NR_CPUS_DEFAULT_4
	bool

config NR_CPUS_DEFAULT_8
	bool

config NR_CPUS_DEFAULT_16
	bool

config NR_CPUS_DEFAULT_32
	bool

config NR_CPUS_DEFAULT_64
	bool

config NR_CPUS
	int "Maximum number of CPUs (2-256)"
	range 2 256
	depends on SMP
	default "4" if NR_CPUS_DEFAULT_4
	default "8" if NR_CPUS_DEFAULT_8
	default "16" if NR_CPUS_DEFAULT_16
	default "32" if NR_CPUS_DEFAULT_32
	default "64" if NR_CPUS_DEFAULT_64
	help
	  This allows you to specify the maximum number of CPUs which this
	  kernel will support.  The maximum supported value is 32 for 32-bit
	  kernel and 64 for 64-bit kernels; the minimum value which makes
	  sense is 1 for Qemu (useful only for kernel debugging purposes)
	  and 2 for all others.

	  This is purely to save memory - each supported CPU adds
	  approximately eight kilobytes to the kernel image.  For best
	  performance should round up your number of processors to the next
	  power of two.

source "kernel/Kconfig.hz"

config KEXEC
	bool "Kexec system call"
	select KEXEC_CORE
	help
	  kexec is a system call that implements the ability to shutdown your
	  current kernel, and to start another kernel.  It is like a reboot
	  but it is independent of the system firmware.   And like a reboot
	  you can start any kernel with it, not just Linux.

	  The name comes from the similarity to the exec system call.

config CRASH_DUMP
	bool "Build kdump crash kernel"
	select RELOCATABLE
	help
	  Generate crash dump after being started by kexec. This should
	  be normally only set in special crash dump kernels which are
	  loaded in the main kernel with kexec-tools into a specially
	  reserved region and then later executed after a crash by
	  kdump/kexec.

	  For more details see Documentation/admin-guide/kdump/kdump.rst

config ARCH_IOREMAP
	bool "Enable LoongArch DMW-based ioremap()"
	help
	  We use generic TLB-based ioremap() by default since it has page
	  protection support. However, you can enable LoongArch DMW-based
	  ioremap() for better performance.

config ARCH_WRITECOMBINE
	bool "Enable WriteCombine (WUC) for ioremap()"
	help
	  LoongArch maintains cache coherency in hardware, but when paired
	  with LS7A chipsets the WUC attribute (Weak-ordered UnCached, which
	  is similar to WriteCombine) is out of the scope of cache coherency
	  machanism for PCIe devices (this is a PCIe protocol violation, which
	  may be fixed in newer chipsets).

	  This means WUC can only used for write-only memory regions now, so
	  this option is disabled by default, making WUC silently fallback to
	  SUC for ioremap(). You can enable this option if the kernel is ensured
	  to run on hardware without this bug.

	  You can override this setting via writecombine=on/off boot parameter.

config ARCH_STRICT_ALIGN
	bool "Enable -mstrict-align to prevent unaligned accesses" if EXPERT
	default y
	help
	  Not all LoongArch cores support h/w unaligned access, we can use
	  -mstrict-align build parameter to prevent unaligned accesses.

	  CPUs with h/w unaligned access support:
	  Loongson-2K2000/2K3000/3A5000/3C5000/3D5000.

	  CPUs without h/w unaligned access support:
	  Loongson-2K500/2K1000.

	  This option is enabled by default to make the kernel be able to run
	  on all LoongArch systems. But you can disable it manually if you want
	  to run kernel only on systems with h/w unaligned access support in
	  order to optimise for performance.

config USE_OF
	bool
	select OF
	select OF_EARLY_FLATTREE
	select IRQ_DOMAIN

config BUILTIN_DTB
	bool

source "kernel/livepatch/Kconfig"

endmenu

config ARCH_ENABLE_MEMORY_HOTPLUG
	def_bool y
	depends on LOONGARCH

config ARCH_ENABLE_MEMORY_HOTREMOVE
	def_bool y
	depends on MEMORY_HOTPLUG

config ARCH_ENABLE_THP_MIGRATION
	def_bool y
	depends on TRANSPARENT_HUGEPAGE

config ARCH_MEMORY_PROBE
	def_bool y
	depends on MEMORY_HOTPLUG

config GENERIC_BUG
	def_bool y
	depends on BUG

config GENERIC_BUG_RELATIVE_POINTERS
	def_bool y
	depends on GENERIC_BUG

config LOCKDEP_SUPPORT
	bool
	default y

config STACKTRACE_SUPPORT
	bool
	default y

config TRACE_IRQFLAGS_SUPPORT
	bool
	default y

config MMU
	bool
	default y

config ARCH_MMAP_RND_BITS_MIN
	default 12 if 64BIT
	default 8

config ARCH_MMAP_RND_BITS_MAX
	default 18 if 64BIT
	default 15

config ZONE_DMA
	bool

config ZONE_DMA32
	bool

config KASAN_SHADOW_OFFSET
	hex
	default 0x0
	depends on KASAN

menu "Power management options"

config ARCH_SUSPEND_POSSIBLE
	def_bool y
	depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP

config ARCH_HIBERNATION_POSSIBLE
	def_bool y
	depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP

source "kernel/power/Kconfig"
source "drivers/acpi/Kconfig"
source "drivers/cpufreq/Kconfig"

endmenu

source "drivers/firmware/Kconfig"
source "arch/loongarch/kvm/Kconfig"

config PARAVIRT
    bool "Enable paravirtualization code"
    help
      This changes the kernel so it can modify itself when it is run
      under a hypervisor, potentially improving performance significantly
      over full virtualization.

config PARAVIRT_SPINLOCKS
        bool "Paravirtualization layer for spinlocks"
        depends on PARAVIRT && SMP
        help
          Paravirtualized spinlocks allow a pvops backend to replace the
          spinlock implementation with something virtualization-friendly
          (for example, block the virtual CPU rather than spinning).

          It has a minimal impact on native kernels and gives a nice performance
          benefit on paravirtualized KVM kernels.

          If you are unsure how to answer this question, answer Y.

config QUEUED_LOCK_STAT
        bool "Paravirt queued spinlock statistics"
        depends on PARAVIRT_SPINLOCKS && DEBUG_FS
        help
          Enable the collection of statistical data on the slowpath
          behavior of paravirtualized queued spinlocks and report
          them on debugfs.

config PARAVIRT_TIME_ACCOUNTING
    bool "Paravirtual steal time accounting"
    select PARAVIRT
    default n
    help
      Select this option to enable fine granularity task steal time
      accounting. Time spent executing other tasks in parallel with
      the current vCPU is discounted from the vCPU power. To account for
      that, there can be a small performance impact.

      If in doubt, say N here.