1/* SPDX-License-Identifier: GPL-2.0-only */ 2/* 3 * Definitions for Compaq iPAQ H3100 and H3600 handheld computers 4 * 5 * (c) 2000 Compaq Computer Corporation. (Author: Jamey Hicks) 6 * (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru> 7 */ 8 9#ifndef _INCLUDE_H3XXX_H_ 10#define _INCLUDE_H3XXX_H_ 11 12#include "hardware.h" /* Gives GPIO_MAX */ 13 14/* Physical memory regions corresponding to chip selects */ 15#define H3600_EGPIO_PHYS (SA1100_CS5_PHYS + 0x01000000) 16#define H3600_BANK_2_PHYS SA1100_CS2_PHYS 17#define H3600_BANK_4_PHYS SA1100_CS4_PHYS 18 19/* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */ 20#define H3600_EGPIO_VIRT 0xf0000000 21#define H3600_BANK_2_VIRT 0xf1000000 22#define H3600_BANK_4_VIRT 0xf3800000 23 24/* 25 * gpiolib numbers for all iPAQs 26 */ 27#define H3XXX_GPIO_PWR_BUTTON 0 28#define H3XXX_GPIO_PCMCIA_CD1 10 29#define H3XXX_GPIO_PCMCIA_IRQ1 11 30#define H3XXX_GPIO_PCMCIA_CD0 17 31#define H3XXX_GPIO_ACTION_BUTTON 18 32#define H3XXX_GPIO_SYS_CLK 19 33#define H3XXX_GPIO_PCMCIA_IRQ0 21 34#define H3XXX_GPIO_COM_DCD 23 35#define H3XXX_GPIO_OPTION 24 36#define H3XXX_GPIO_COM_CTS 25 37#define H3XXX_GPIO_COM_RTS 26 38 39/* machine-specific gpios */ 40 41#define H3100_GPIO_BT_ON 2 42#define H3100_GPIO_QMUTE 4 43#define H3100_GPIO_LCD_3V_ON 5 44#define H3100_GPIO_AUD_ON 6 45#define H3100_GPIO_AUD_PWR_ON 7 46#define H3100_GPIO_IR_ON 8 47#define H3100_GPIO_IR_FSEL 9 48 49#define H3600_GPIO_CLK_SET0 12 /* audio sample rate clock generator */ 50#define H3600_GPIO_CLK_SET1 13 51#define H3600_GPIO_SOFT_RESET 20 /* also known as BATT_FAULT */ 52#define H3600_GPIO_OPT_LOCK 22 53#define H3600_GPIO_OPT_DET 27 54 55 56/* H3100 / 3600 EGPIO pins */ 57#define H3XXX_EGPIO_BASE (GPIO_MAX + 1) 58 59#define H3XXX_EGPIO_VPP_ON (H3XXX_EGPIO_BASE + 0) 60#define H3XXX_EGPIO_CARD_RESET (H3XXX_EGPIO_BASE + 1) /* reset the attached pcmcia/compactflash card. active high. */ 61#define H3XXX_EGPIO_OPT_RESET (H3XXX_EGPIO_BASE + 2) /* reset the attached option pack. active high. */ 62#define H3XXX_EGPIO_CODEC_NRESET (H3XXX_EGPIO_BASE + 3) /* reset the onboard UDA1341. active low. */ 63#define H3XXX_EGPIO_OPT_NVRAM_ON (H3XXX_EGPIO_BASE + 4) /* apply power to optionpack nvram, active high. */ 64#define H3XXX_EGPIO_OPT_ON (H3XXX_EGPIO_BASE + 5) /* full power to option pack. active high. */ 65#define H3XXX_EGPIO_LCD_ON (H3XXX_EGPIO_BASE + 6) /* enable 3.3V to LCD. active high. */ 66#define H3XXX_EGPIO_RS232_ON (H3XXX_EGPIO_BASE + 7) /* UART3 transceiver force on. Active high. */ 67 68/* H3600 only EGPIO pins */ 69#define H3600_EGPIO_LCD_PCI (H3XXX_EGPIO_BASE + 8) /* LCD control IC enable. active high. */ 70#define H3600_EGPIO_IR_ON (H3XXX_EGPIO_BASE + 9) /* apply power to IR module. active high. */ 71#define H3600_EGPIO_AUD_AMP_ON (H3XXX_EGPIO_BASE + 10) /* apply power to audio power amp. active high. */ 72#define H3600_EGPIO_AUD_PWR_ON (H3XXX_EGPIO_BASE + 11) /* apply power to reset of audio circuit. active high. */ 73#define H3600_EGPIO_QMUTE (H3XXX_EGPIO_BASE + 12) /* mute control for onboard UDA1341. active high. */ 74#define H3600_EGPIO_IR_FSEL (H3XXX_EGPIO_BASE + 13) /* IR speed select: 1->fast, 0->slow */ 75#define H3600_EGPIO_LCD_5V_ON (H3XXX_EGPIO_BASE + 14) /* enable 5V to LCD. active high. */ 76#define H3600_EGPIO_LVDD_ON (H3XXX_EGPIO_BASE + 15) /* enable 9V and -6.5V to LCD. */ 77 78void __init h3xxx_map_io(void); 79void __init h3xxx_mach_init(void); 80 81#endif /* _INCLUDE_H3XXX_H_ */ 82