1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Hardware definitions for Voipac PXA270
4 *
5 * Copyright (C) 2010
6 * Marek Vasut <marek.vasut@gmail.com>
7 */
8
9#include <linux/platform_device.h>
10#include <linux/delay.h>
11#include <linux/irq.h>
12#include <linux/gpio_keys.h>
13#include <linux/input.h>
14#include <linux/leds.h>
15#include <linux/gpio.h>
16#include <linux/gpio/machine.h>
17#include <linux/mtd/mtd.h>
18#include <linux/mtd/partitions.h>
19#include <linux/mtd/physmap.h>
20#include <linux/mtd/onenand.h>
21#include <linux/dm9000.h>
22#include <linux/ucb1400.h>
23#include <linux/ata_platform.h>
24#include <linux/regulator/machine.h>
25#include <linux/regulator/max1586.h>
26#include <linux/platform_data/i2c-pxa.h>
27
28#include <asm/mach-types.h>
29#include <asm/mach/arch.h>
30
31#include "pxa27x.h"
32#include <mach/audio.h>
33#include <mach/vpac270.h>
34#include <linux/platform_data/mmc-pxamci.h>
35#include <linux/platform_data/video-pxafb.h>
36#include <linux/platform_data/usb-ohci-pxa27x.h>
37#include "pxa27x-udc.h"
38#include "udc.h"
39#include <linux/platform_data/ata-pxa.h>
40
41#include "generic.h"
42#include "devices.h"
43
44/******************************************************************************
45 * Pin configuration
46 ******************************************************************************/
47static unsigned long vpac270_pin_config[] __initdata = {
48	/* MMC */
49	GPIO32_MMC_CLK,
50	GPIO92_MMC_DAT_0,
51	GPIO109_MMC_DAT_1,
52	GPIO110_MMC_DAT_2,
53	GPIO111_MMC_DAT_3,
54	GPIO112_MMC_CMD,
55	GPIO53_GPIO,	/* SD detect */
56	GPIO52_GPIO,	/* SD r/o switch */
57
58	/* GPIO KEYS */
59	GPIO1_GPIO,	/* USER BTN */
60
61	/* LEDs */
62	GPIO15_GPIO,	/* orange led */
63
64	/* FFUART */
65	GPIO34_FFUART_RXD,
66	GPIO39_FFUART_TXD,
67	GPIO27_FFUART_RTS,
68	GPIO100_FFUART_CTS,
69	GPIO33_FFUART_DSR,
70	GPIO40_FFUART_DTR,
71	GPIO10_FFUART_DCD,
72	GPIO38_FFUART_RI,
73
74	/* LCD */
75	GPIO58_LCD_LDD_0,
76	GPIO59_LCD_LDD_1,
77	GPIO60_LCD_LDD_2,
78	GPIO61_LCD_LDD_3,
79	GPIO62_LCD_LDD_4,
80	GPIO63_LCD_LDD_5,
81	GPIO64_LCD_LDD_6,
82	GPIO65_LCD_LDD_7,
83	GPIO66_LCD_LDD_8,
84	GPIO67_LCD_LDD_9,
85	GPIO68_LCD_LDD_10,
86	GPIO69_LCD_LDD_11,
87	GPIO70_LCD_LDD_12,
88	GPIO71_LCD_LDD_13,
89	GPIO72_LCD_LDD_14,
90	GPIO73_LCD_LDD_15,
91	GPIO86_LCD_LDD_16,
92	GPIO87_LCD_LDD_17,
93	GPIO74_LCD_FCLK,
94	GPIO75_LCD_LCLK,
95	GPIO76_LCD_PCLK,
96	GPIO77_LCD_BIAS,
97
98	/* PCMCIA */
99	GPIO48_nPOE,
100	GPIO49_nPWE,
101	GPIO50_nPIOR,
102	GPIO51_nPIOW,
103	GPIO85_nPCE_1,
104	GPIO54_nPCE_2,
105	GPIO55_nPREG,
106	GPIO57_nIOIS16,
107	GPIO56_nPWAIT,
108	GPIO104_PSKTSEL,
109	GPIO84_GPIO,	/* PCMCIA CD */
110	GPIO35_GPIO,	/* PCMCIA RDY */
111	GPIO107_GPIO,	/* PCMCIA PPEN */
112	GPIO11_GPIO,	/* PCMCIA RESET */
113	GPIO17_GPIO,	/* CF CD */
114	GPIO12_GPIO,	/* CF RDY */
115	GPIO16_GPIO,	/* CF RESET */
116
117	/* UHC */
118	GPIO88_USBH1_PWR,
119	GPIO89_USBH1_PEN,
120	GPIO119_USBH2_PWR,
121	GPIO120_USBH2_PEN,
122
123	/* UDC */
124	GPIO41_GPIO,
125
126	/* Ethernet */
127	GPIO114_GPIO,	/* IRQ */
128
129	/* AC97 */
130	GPIO28_AC97_BITCLK,
131	GPIO29_AC97_SDATA_IN_0,
132	GPIO30_AC97_SDATA_OUT,
133	GPIO31_AC97_SYNC,
134	GPIO95_AC97_nRESET,
135	GPIO98_AC97_SYSCLK,
136	GPIO113_GPIO,	/* TS IRQ */
137
138	/* I2C */
139	GPIO117_I2C_SCL,
140	GPIO118_I2C_SDA,
141
142	/* IDE */
143	GPIO36_GPIO,	/* IDE IRQ */
144	GPIO80_DREQ_1,
145};
146
147/******************************************************************************
148 * NOR Flash
149 ******************************************************************************/
150#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
151static struct mtd_partition vpac270_nor_partitions[] = {
152	{
153		.name		= "Flash",
154		.offset		= 0x00000000,
155		.size		= MTDPART_SIZ_FULL,
156	}
157};
158
159static struct physmap_flash_data vpac270_flash_data[] = {
160	{
161		.width		= 2,	/* bankwidth in bytes */
162		.parts		= vpac270_nor_partitions,
163		.nr_parts	= ARRAY_SIZE(vpac270_nor_partitions)
164	}
165};
166
167static struct resource vpac270_flash_resource = {
168	.start	= PXA_CS0_PHYS,
169	.end	= PXA_CS0_PHYS + SZ_64M - 1,
170	.flags	= IORESOURCE_MEM,
171};
172
173static struct platform_device vpac270_flash = {
174	.name		= "physmap-flash",
175	.id		= 0,
176	.resource	= &vpac270_flash_resource,
177	.num_resources	= 1,
178	.dev 		= {
179		.platform_data = vpac270_flash_data,
180	},
181};
182static void __init vpac270_nor_init(void)
183{
184	platform_device_register(&vpac270_flash);
185}
186#else
187static inline void vpac270_nor_init(void) {}
188#endif
189
190/******************************************************************************
191 * OneNAND Flash
192 ******************************************************************************/
193#if defined(CONFIG_MTD_ONENAND) || defined(CONFIG_MTD_ONENAND_MODULE)
194static struct mtd_partition vpac270_onenand_partitions[] = {
195	{
196		.name		= "Flash",
197		.offset		= 0x00000000,
198		.size		= MTDPART_SIZ_FULL,
199	}
200};
201
202static struct onenand_platform_data vpac270_onenand_info = {
203	.parts		= vpac270_onenand_partitions,
204	.nr_parts	= ARRAY_SIZE(vpac270_onenand_partitions),
205};
206
207static struct resource vpac270_onenand_resources[] = {
208	[0] = {
209		.start	= PXA_CS0_PHYS,
210		.end	= PXA_CS0_PHYS + SZ_1M,
211		.flags	= IORESOURCE_MEM,
212	},
213};
214
215static struct platform_device vpac270_onenand = {
216	.name		= "onenand-flash",
217	.id		= -1,
218	.resource	= vpac270_onenand_resources,
219	.num_resources	= ARRAY_SIZE(vpac270_onenand_resources),
220	.dev		= {
221		.platform_data	= &vpac270_onenand_info,
222	},
223};
224
225static void __init vpac270_onenand_init(void)
226{
227	platform_device_register(&vpac270_onenand);
228}
229#else
230static void __init vpac270_onenand_init(void) {}
231#endif
232
233/******************************************************************************
234 * SD/MMC card controller
235 ******************************************************************************/
236#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
237static struct pxamci_platform_data vpac270_mci_platform_data = {
238	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
239	.detect_delay_ms	= 200,
240};
241
242static struct gpiod_lookup_table vpac270_mci_gpio_table = {
243	.dev_id = "pxa2xx-mci.0",
244	.table = {
245		GPIO_LOOKUP("gpio-pxa", GPIO53_VPAC270_SD_DETECT_N,
246			    "cd", GPIO_ACTIVE_LOW),
247		GPIO_LOOKUP("gpio-pxa", GPIO52_VPAC270_SD_READONLY,
248			    "wp", GPIO_ACTIVE_LOW),
249		{ },
250	},
251};
252
253static void __init vpac270_mmc_init(void)
254{
255	gpiod_add_lookup_table(&vpac270_mci_gpio_table);
256	pxa_set_mci_info(&vpac270_mci_platform_data);
257}
258#else
259static inline void vpac270_mmc_init(void) {}
260#endif
261
262/******************************************************************************
263 * GPIO keys
264 ******************************************************************************/
265#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
266static struct gpio_keys_button vpac270_pxa_buttons[] = {
267	{KEY_POWER, GPIO1_VPAC270_USER_BTN, 0, "USER BTN"},
268};
269
270static struct gpio_keys_platform_data vpac270_pxa_keys_data = {
271	.buttons	= vpac270_pxa_buttons,
272	.nbuttons	= ARRAY_SIZE(vpac270_pxa_buttons),
273};
274
275static struct platform_device vpac270_pxa_keys = {
276	.name	= "gpio-keys",
277	.id	= -1,
278	.dev	= {
279		.platform_data = &vpac270_pxa_keys_data,
280	},
281};
282
283static void __init vpac270_keys_init(void)
284{
285	platform_device_register(&vpac270_pxa_keys);
286}
287#else
288static inline void vpac270_keys_init(void) {}
289#endif
290
291/******************************************************************************
292 * LED
293 ******************************************************************************/
294#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
295struct gpio_led vpac270_gpio_leds[] = {
296{
297	.name			= "vpac270:orange:user",
298	.default_trigger	= "none",
299	.gpio			= GPIO15_VPAC270_LED_ORANGE,
300	.active_low		= 1,
301}
302};
303
304static struct gpio_led_platform_data vpac270_gpio_led_info = {
305	.leds		= vpac270_gpio_leds,
306	.num_leds	= ARRAY_SIZE(vpac270_gpio_leds),
307};
308
309static struct platform_device vpac270_leds = {
310	.name	= "leds-gpio",
311	.id	= -1,
312	.dev	= {
313		.platform_data	= &vpac270_gpio_led_info,
314	}
315};
316
317static void __init vpac270_leds_init(void)
318{
319	platform_device_register(&vpac270_leds);
320}
321#else
322static inline void vpac270_leds_init(void) {}
323#endif
324
325/******************************************************************************
326 * USB Host
327 ******************************************************************************/
328#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
329static int vpac270_ohci_init(struct device *dev)
330{
331	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
332	return 0;
333}
334
335static struct pxaohci_platform_data vpac270_ohci_info = {
336	.port_mode	= PMM_PERPORT_MODE,
337	.flags		= ENABLE_PORT1 | ENABLE_PORT2 |
338			POWER_CONTROL_LOW | POWER_SENSE_LOW,
339	.init		= vpac270_ohci_init,
340};
341
342static void __init vpac270_uhc_init(void)
343{
344	pxa_set_ohci_info(&vpac270_ohci_info);
345}
346#else
347static inline void vpac270_uhc_init(void) {}
348#endif
349
350/******************************************************************************
351 * USB Gadget
352 ******************************************************************************/
353#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
354static struct gpiod_lookup_table vpac270_gpio_vbus_gpiod_table = {
355	.dev_id = "gpio-vbus",
356	.table = {
357		GPIO_LOOKUP("gpio-pxa", GPIO41_VPAC270_UDC_DETECT,
358			    "vbus", GPIO_ACTIVE_HIGH),
359		{ },
360	},
361};
362
363static struct platform_device vpac270_gpio_vbus = {
364	.name	= "gpio-vbus",
365	.id	= -1,
366};
367
368static void vpac270_udc_command(int cmd)
369{
370	if (cmd == PXA2XX_UDC_CMD_CONNECT)
371		UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE;
372	else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
373		UP2OCR = UP2OCR_HXOE;
374}
375
376static struct pxa2xx_udc_mach_info vpac270_udc_info __initdata = {
377	.udc_command		= vpac270_udc_command,
378	.gpio_pullup		= -1,
379};
380
381static void __init vpac270_udc_init(void)
382{
383	pxa_set_udc_info(&vpac270_udc_info);
384	gpiod_add_lookup_table(&vpac270_gpio_vbus_gpiod_table);
385	platform_device_register(&vpac270_gpio_vbus);
386}
387#else
388static inline void vpac270_udc_init(void) {}
389#endif
390
391/******************************************************************************
392 * Ethernet
393 ******************************************************************************/
394#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
395static struct resource vpac270_dm9000_resources[] = {
396	[0] = {
397		.start	= PXA_CS2_PHYS + 0x300,
398		.end	= PXA_CS2_PHYS + 0x303,
399		.flags	= IORESOURCE_MEM,
400	},
401	[1] = {
402		.start	= PXA_CS2_PHYS + 0x304,
403		.end	= PXA_CS2_PHYS + 0x343,
404		.flags	= IORESOURCE_MEM,
405	},
406	[2] = {
407		.start	= PXA_GPIO_TO_IRQ(GPIO114_VPAC270_ETH_IRQ),
408		.end	= PXA_GPIO_TO_IRQ(GPIO114_VPAC270_ETH_IRQ),
409		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
410	},
411};
412
413static struct dm9000_plat_data vpac270_dm9000_platdata = {
414	.flags		= DM9000_PLATF_32BITONLY,
415};
416
417static struct platform_device vpac270_dm9000_device = {
418	.name		= "dm9000",
419	.id		= -1,
420	.num_resources	= ARRAY_SIZE(vpac270_dm9000_resources),
421	.resource	= vpac270_dm9000_resources,
422	.dev		= {
423		.platform_data = &vpac270_dm9000_platdata,
424	}
425};
426
427static void __init vpac270_eth_init(void)
428{
429	platform_device_register(&vpac270_dm9000_device);
430}
431#else
432static inline void vpac270_eth_init(void) {}
433#endif
434
435/******************************************************************************
436 * Audio and Touchscreen
437 ******************************************************************************/
438#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
439	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
440static pxa2xx_audio_ops_t vpac270_ac97_pdata = {
441	.reset_gpio	= 95,
442};
443
444static struct ucb1400_pdata vpac270_ucb1400_pdata = {
445	.irq		= PXA_GPIO_TO_IRQ(GPIO113_VPAC270_TS_IRQ),
446};
447
448static struct platform_device vpac270_ucb1400_device = {
449	.name		= "ucb1400_core",
450	.id		= -1,
451	.dev		= {
452		.platform_data = &vpac270_ucb1400_pdata,
453	},
454};
455
456static void __init vpac270_ts_init(void)
457{
458	pxa_set_ac97_info(&vpac270_ac97_pdata);
459	platform_device_register(&vpac270_ucb1400_device);
460}
461#else
462static inline void vpac270_ts_init(void) {}
463#endif
464
465/******************************************************************************
466 * RTC
467 ******************************************************************************/
468#if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE)
469static struct i2c_board_info __initdata vpac270_i2c_devs[] = {
470	{
471		I2C_BOARD_INFO("ds1339", 0x68),
472	},
473};
474
475static void __init vpac270_rtc_init(void)
476{
477	i2c_register_board_info(0, ARRAY_AND_SIZE(vpac270_i2c_devs));
478}
479#else
480static inline void vpac270_rtc_init(void) {}
481#endif
482
483/******************************************************************************
484 * Framebuffer
485 ******************************************************************************/
486#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
487static struct pxafb_mode_info vpac270_lcd_modes[] = {
488{
489	.pixclock	= 57692,
490	.xres		= 640,
491	.yres		= 480,
492	.bpp		= 32,
493	.depth		= 18,
494
495	.left_margin	= 144,
496	.right_margin	= 32,
497	.upper_margin	= 13,
498	.lower_margin	= 30,
499
500	.hsync_len	= 32,
501	.vsync_len	= 2,
502
503	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
504}, {	/* CRT 640x480 */
505	.pixclock	= 35000,
506	.xres		= 640,
507	.yres		= 480,
508	.bpp		= 16,
509	.depth		= 16,
510
511	.left_margin	= 96,
512	.right_margin	= 48,
513	.upper_margin	= 33,
514	.lower_margin	= 10,
515
516	.hsync_len	= 48,
517	.vsync_len	= 1,
518
519	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
520}, {	/* CRT 800x600 H=30kHz V=48HZ */
521	.pixclock	= 25000,
522	.xres		= 800,
523	.yres		= 600,
524	.bpp		= 16,
525	.depth		= 16,
526
527	.left_margin	= 50,
528	.right_margin	= 1,
529	.upper_margin	= 21,
530	.lower_margin	= 12,
531
532	.hsync_len	= 8,
533	.vsync_len	= 1,
534
535	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
536}, {	/* CRT 1024x768 H=40kHz V=50Hz */
537	.pixclock	= 15000,
538	.xres		= 1024,
539	.yres		= 768,
540	.bpp		= 16,
541	.depth		= 16,
542
543	.left_margin	= 220,
544	.right_margin	= 8,
545	.upper_margin	= 33,
546	.lower_margin	= 2,
547
548	.hsync_len	= 48,
549	.vsync_len	= 1,
550
551	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
552}
553};
554
555static struct pxafb_mach_info vpac270_lcd_screen = {
556	.modes		= vpac270_lcd_modes,
557	.num_modes	= ARRAY_SIZE(vpac270_lcd_modes),
558	.lcd_conn	= LCD_COLOR_TFT_18BPP,
559};
560
561static void vpac270_lcd_power(int on, struct fb_var_screeninfo *info)
562{
563	gpio_set_value(GPIO81_VPAC270_BKL_ON, on);
564}
565
566static void __init vpac270_lcd_init(void)
567{
568	int ret;
569
570	ret = gpio_request(GPIO81_VPAC270_BKL_ON, "BKL-ON");
571	if (ret) {
572		pr_err("Requesting BKL-ON GPIO failed!\n");
573		goto err;
574	}
575
576	ret = gpio_direction_output(GPIO81_VPAC270_BKL_ON, 1);
577	if (ret) {
578		pr_err("Setting BKL-ON GPIO direction failed!\n");
579		goto err2;
580	}
581
582	vpac270_lcd_screen.pxafb_lcd_power = vpac270_lcd_power;
583	pxa_set_fb_info(NULL, &vpac270_lcd_screen);
584	return;
585
586err2:
587	gpio_free(GPIO81_VPAC270_BKL_ON);
588err:
589	return;
590}
591#else
592static inline void vpac270_lcd_init(void) {}
593#endif
594
595/******************************************************************************
596 * PATA IDE
597 ******************************************************************************/
598#if defined(CONFIG_PATA_PXA) || defined(CONFIG_PATA_PXA_MODULE)
599static struct pata_pxa_pdata vpac270_pata_pdata = {
600	.reg_shift	= 1,
601	.dma_dreq	= 1,
602	.irq_flags	= IRQF_TRIGGER_RISING,
603};
604
605static struct resource vpac270_ide_resources[] = {
606	[0] = {	/* I/O Base address */
607	       .start	= PXA_CS3_PHYS + 0x120,
608	       .end	= PXA_CS3_PHYS + 0x13f,
609	       .flags	= IORESOURCE_MEM
610	},
611	[1] = {	/* CTL Base address */
612	       .start	= PXA_CS3_PHYS + 0x15c,
613	       .end	= PXA_CS3_PHYS + 0x15f,
614	       .flags	= IORESOURCE_MEM
615	},
616	[2] = {	/* DMA Base address */
617	       .start	= PXA_CS3_PHYS + 0x20,
618	       .end	= PXA_CS3_PHYS + 0x2f,
619	       .flags	= IORESOURCE_DMA
620	},
621	[3] = {	/* IDE IRQ pin */
622	       .start	= PXA_GPIO_TO_IRQ(GPIO36_VPAC270_IDE_IRQ),
623	       .end	= PXA_GPIO_TO_IRQ(GPIO36_VPAC270_IDE_IRQ),
624	       .flags	= IORESOURCE_IRQ
625	}
626};
627
628static struct platform_device vpac270_ide_device = {
629	.name		= "pata_pxa",
630	.num_resources	= ARRAY_SIZE(vpac270_ide_resources),
631	.resource	= vpac270_ide_resources,
632	.dev		= {
633		.platform_data	= &vpac270_pata_pdata,
634		.coherent_dma_mask	= 0xffffffff,
635	}
636};
637
638static void __init vpac270_ide_init(void)
639{
640	platform_device_register(&vpac270_ide_device);
641}
642#else
643static inline void vpac270_ide_init(void) {}
644#endif
645
646/******************************************************************************
647 * Core power regulator
648 ******************************************************************************/
649#if defined(CONFIG_REGULATOR_MAX1586) || \
650    defined(CONFIG_REGULATOR_MAX1586_MODULE)
651static struct regulator_consumer_supply vpac270_max1587a_consumers[] = {
652	REGULATOR_SUPPLY("vcc_core", NULL),
653};
654
655static struct regulator_init_data vpac270_max1587a_v3_info = {
656	.constraints = {
657		.name		= "vcc_core range",
658		.min_uV		= 900000,
659		.max_uV		= 1705000,
660		.always_on	= 1,
661		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
662	},
663	.consumer_supplies	= vpac270_max1587a_consumers,
664	.num_consumer_supplies	= ARRAY_SIZE(vpac270_max1587a_consumers),
665};
666
667static struct max1586_subdev_data vpac270_max1587a_subdevs[] = {
668	{
669		.name		= "vcc_core",
670		.id		= MAX1586_V3,
671		.platform_data	= &vpac270_max1587a_v3_info,
672	}
673};
674
675static struct max1586_platform_data vpac270_max1587a_info = {
676	.subdevs     = vpac270_max1587a_subdevs,
677	.num_subdevs = ARRAY_SIZE(vpac270_max1587a_subdevs),
678	.v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
679};
680
681static struct i2c_board_info __initdata vpac270_pi2c_board_info[] = {
682	{
683		I2C_BOARD_INFO("max1586", 0x14),
684		.platform_data	= &vpac270_max1587a_info,
685	},
686};
687
688static void __init vpac270_pmic_init(void)
689{
690	i2c_register_board_info(1, ARRAY_AND_SIZE(vpac270_pi2c_board_info));
691}
692#else
693static inline void vpac270_pmic_init(void) {}
694#endif
695
696
697/******************************************************************************
698 * Machine init
699 ******************************************************************************/
700static void __init vpac270_init(void)
701{
702	pxa2xx_mfp_config(ARRAY_AND_SIZE(vpac270_pin_config));
703
704	pxa_set_ffuart_info(NULL);
705	pxa_set_btuart_info(NULL);
706	pxa_set_stuart_info(NULL);
707	pxa_set_i2c_info(NULL);
708	pxa27x_set_i2c_power_info(NULL);
709
710	vpac270_pmic_init();
711	vpac270_lcd_init();
712	vpac270_mmc_init();
713	vpac270_nor_init();
714	vpac270_onenand_init();
715	vpac270_leds_init();
716	vpac270_keys_init();
717	vpac270_uhc_init();
718	vpac270_udc_init();
719	vpac270_eth_init();
720	vpac270_ts_init();
721	vpac270_rtc_init();
722	vpac270_ide_init();
723
724	regulator_has_full_constraints();
725}
726
727MACHINE_START(VPAC270, "Voipac PXA270")
728	.atag_offset	= 0x100,
729	.map_io		= pxa27x_map_io,
730	.nr_irqs	= PXA_NR_IRQS,
731	.init_irq	= pxa27x_init_irq,
732	.handle_irq	= pxa27x_handle_irq,
733	.init_time	= pxa_timer_init,
734	.init_machine	= vpac270_init,
735	.restart	= pxa_restart,
736MACHINE_END
737