1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * Copyright 2011-2013 Freescale Semiconductor, Inc. 4 * Copyright 2011 Linaro Ltd. 5 */ 6 7#include <linux/clk.h> 8#include <linux/irqchip.h> 9#include <linux/of_platform.h> 10#include <linux/pci.h> 11#include <linux/phy.h> 12#include <linux/regmap.h> 13#include <linux/micrel_phy.h> 14#include <linux/mfd/syscon.h> 15#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> 16#include <asm/mach/arch.h> 17#include <asm/mach/map.h> 18 19#include "common.h" 20#include "cpuidle.h" 21#include "hardware.h" 22 23/* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */ 24static int ksz9021rn_phy_fixup(struct phy_device *phydev) 25{ 26 if (IS_BUILTIN(CONFIG_PHYLIB)) { 27 /* min rx data delay */ 28 phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL, 29 0x8000 | MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW); 30 phy_write(phydev, MICREL_KSZ9021_EXTREG_DATA_WRITE, 0x0000); 31 32 /* max rx/tx clock delay, min rx/tx control delay */ 33 phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL, 34 0x8000 | MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW); 35 phy_write(phydev, MICREL_KSZ9021_EXTREG_DATA_WRITE, 0xf0f0); 36 phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL, 37 MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW); 38 } 39 40 return 0; 41} 42 43static void mmd_write_reg(struct phy_device *dev, int device, int reg, int val) 44{ 45 phy_write(dev, 0x0d, device); 46 phy_write(dev, 0x0e, reg); 47 phy_write(dev, 0x0d, (1 << 14) | device); 48 phy_write(dev, 0x0e, val); 49} 50 51static int ksz9031rn_phy_fixup(struct phy_device *dev) 52{ 53 /* 54 * min rx data delay, max rx/tx clock delay, 55 * min rx/tx control delay 56 */ 57 mmd_write_reg(dev, 2, 4, 0); 58 mmd_write_reg(dev, 2, 5, 0); 59 mmd_write_reg(dev, 2, 8, 0x003ff); 60 61 return 0; 62} 63 64/* 65 * fixup for PLX PEX8909 bridge to configure GPIO1-7 as output High 66 * as they are used for slots1-7 PERST# 67 */ 68static void ventana_pciesw_early_fixup(struct pci_dev *dev) 69{ 70 u32 dw; 71 72 if (!of_machine_is_compatible("gw,ventana")) 73 return; 74 75 if (dev->devfn != 0) 76 return; 77 78 pci_read_config_dword(dev, 0x62c, &dw); 79 dw |= 0xaaa8; // GPIO1-7 outputs 80 pci_write_config_dword(dev, 0x62c, dw); 81 82 pci_read_config_dword(dev, 0x644, &dw); 83 dw |= 0xfe; // GPIO1-7 output high 84 pci_write_config_dword(dev, 0x644, dw); 85 86 msleep(100); 87} 88DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8609, ventana_pciesw_early_fixup); 89DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8606, ventana_pciesw_early_fixup); 90DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8604, ventana_pciesw_early_fixup); 91 92static int ar8031_phy_fixup(struct phy_device *dev) 93{ 94 u16 val; 95 96 /* To enable AR8031 output a 125MHz clk from CLK_25M */ 97 phy_write(dev, 0xd, 0x7); 98 phy_write(dev, 0xe, 0x8016); 99 phy_write(dev, 0xd, 0x4007); 100 101 val = phy_read(dev, 0xe); 102 val &= 0xffe3; 103 val |= 0x18; 104 phy_write(dev, 0xe, val); 105 106 /* introduce tx clock delay */ 107 phy_write(dev, 0x1d, 0x5); 108 val = phy_read(dev, 0x1e); 109 val |= 0x0100; 110 phy_write(dev, 0x1e, val); 111 112 return 0; 113} 114 115#define PHY_ID_AR8031 0x004dd074 116 117static int ar8035_phy_fixup(struct phy_device *dev) 118{ 119 u16 val; 120 121 /* Ar803x phy SmartEEE feature cause link status generates glitch, 122 * which cause ethernet link down/up issue, so disable SmartEEE 123 */ 124 phy_write(dev, 0xd, 0x3); 125 phy_write(dev, 0xe, 0x805d); 126 phy_write(dev, 0xd, 0x4003); 127 128 val = phy_read(dev, 0xe); 129 phy_write(dev, 0xe, val & ~(1 << 8)); 130 131 /* 132 * Enable 125MHz clock from CLK_25M on the AR8031. This 133 * is fed in to the IMX6 on the ENET_REF_CLK (V22) pad. 134 * Also, introduce a tx clock delay. 135 * 136 * This is the same as is the AR8031 fixup. 137 */ 138 ar8031_phy_fixup(dev); 139 140 /*check phy power*/ 141 val = phy_read(dev, 0x0); 142 if (val & BMCR_PDOWN) 143 phy_write(dev, 0x0, val & ~BMCR_PDOWN); 144 145 return 0; 146} 147 148#define PHY_ID_AR8035 0x004dd072 149 150static void __init imx6q_enet_phy_init(void) 151{ 152 if (IS_BUILTIN(CONFIG_PHYLIB)) { 153 phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, 154 ksz9021rn_phy_fixup); 155 phy_register_fixup_for_uid(PHY_ID_KSZ9031, MICREL_PHY_ID_MASK, 156 ksz9031rn_phy_fixup); 157 phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffef, 158 ar8031_phy_fixup); 159 phy_register_fixup_for_uid(PHY_ID_AR8035, 0xffffffef, 160 ar8035_phy_fixup); 161 } 162} 163 164static void __init imx6q_1588_init(void) 165{ 166 struct device_node *np; 167 struct clk *ptp_clk; 168 struct clk *enet_ref; 169 struct regmap *gpr; 170 u32 clksel; 171 172 np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-fec"); 173 if (!np) { 174 pr_warn("%s: failed to find fec node\n", __func__); 175 return; 176 } 177 178 ptp_clk = of_clk_get(np, 2); 179 if (IS_ERR(ptp_clk)) { 180 pr_warn("%s: failed to get ptp clock\n", __func__); 181 goto put_node; 182 } 183 184 enet_ref = clk_get_sys(NULL, "enet_ref"); 185 if (IS_ERR(enet_ref)) { 186 pr_warn("%s: failed to get enet clock\n", __func__); 187 goto put_ptp_clk; 188 } 189 190 /* 191 * If enet_ref from ANATOP/CCM is the PTP clock source, we need to 192 * set bit IOMUXC_GPR1[21]. Or the PTP clock must be from pad 193 * (external OSC), and we need to clear the bit. 194 */ 195 clksel = clk_is_match(ptp_clk, enet_ref) ? 196 IMX6Q_GPR1_ENET_CLK_SEL_ANATOP : 197 IMX6Q_GPR1_ENET_CLK_SEL_PAD; 198 gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); 199 if (!IS_ERR(gpr)) 200 regmap_update_bits(gpr, IOMUXC_GPR1, 201 IMX6Q_GPR1_ENET_CLK_SEL_MASK, 202 clksel); 203 else 204 pr_err("failed to find fsl,imx6q-iomuxc-gpr regmap\n"); 205 206 clk_put(enet_ref); 207put_ptp_clk: 208 clk_put(ptp_clk); 209put_node: 210 of_node_put(np); 211} 212 213static void __init imx6q_axi_init(void) 214{ 215 struct regmap *gpr; 216 unsigned int mask; 217 218 gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); 219 if (!IS_ERR(gpr)) { 220 /* 221 * Enable the cacheable attribute of VPU and IPU 222 * AXI transactions. 223 */ 224 mask = IMX6Q_GPR4_VPU_WR_CACHE_SEL | 225 IMX6Q_GPR4_VPU_RD_CACHE_SEL | 226 IMX6Q_GPR4_VPU_P_WR_CACHE_VAL | 227 IMX6Q_GPR4_VPU_P_RD_CACHE_VAL_MASK | 228 IMX6Q_GPR4_IPU_WR_CACHE_CTL | 229 IMX6Q_GPR4_IPU_RD_CACHE_CTL; 230 regmap_update_bits(gpr, IOMUXC_GPR4, mask, mask); 231 232 /* Increase IPU read QoS priority */ 233 regmap_update_bits(gpr, IOMUXC_GPR6, 234 IMX6Q_GPR6_IPU1_ID00_RD_QOS_MASK | 235 IMX6Q_GPR6_IPU1_ID01_RD_QOS_MASK, 236 (0xf << 16) | (0x7 << 20)); 237 regmap_update_bits(gpr, IOMUXC_GPR7, 238 IMX6Q_GPR7_IPU2_ID00_RD_QOS_MASK | 239 IMX6Q_GPR7_IPU2_ID01_RD_QOS_MASK, 240 (0xf << 16) | (0x7 << 20)); 241 } else { 242 pr_warn("failed to find fsl,imx6q-iomuxc-gpr regmap\n"); 243 } 244} 245 246static void __init imx6q_init_machine(void) 247{ 248 if (cpu_is_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_2_0) 249 imx_print_silicon_rev("i.MX6QP", IMX_CHIP_REVISION_1_0); 250 else 251 imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q", 252 imx_get_soc_revision()); 253 254 imx6q_enet_phy_init(); 255 256 of_platform_default_populate(NULL, NULL, NULL); 257 258 imx_anatop_init(); 259 cpu_is_imx6q() ? imx6q_pm_init() : imx6dl_pm_init(); 260 imx6q_1588_init(); 261 imx6q_axi_init(); 262} 263 264static void __init imx6q_init_late(void) 265{ 266 /* 267 * WAIT mode is broken on imx6 Dual/Quad revision 1.0 and 1.1 so 268 * there is no point to run cpuidle on them. 269 * 270 * It does work on imx6 Solo/DualLite starting from 1.1 271 */ 272 if ((cpu_is_imx6q() && imx_get_soc_revision() > IMX_CHIP_REVISION_1_1) || 273 (cpu_is_imx6dl() && imx_get_soc_revision() > IMX_CHIP_REVISION_1_0)) 274 imx6q_cpuidle_init(); 275 276 if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) 277 platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0); 278} 279 280static void __init imx6q_map_io(void) 281{ 282 debug_ll_io_init(); 283 imx_scu_map_io(); 284} 285 286static void __init imx6q_init_irq(void) 287{ 288 imx_gpc_check_dt(); 289 imx_init_revision_from_anatop(); 290 imx_init_l2cache(); 291 imx_src_init(); 292 irqchip_init(); 293 imx6_pm_ccm_init("fsl,imx6q-ccm"); 294} 295 296static const char * const imx6q_dt_compat[] __initconst = { 297 "fsl,imx6dl", 298 "fsl,imx6q", 299 "fsl,imx6qp", 300 NULL, 301}; 302 303DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad/DualLite (Device Tree)") 304 .l2c_aux_val = 0, 305 .l2c_aux_mask = ~0, 306 .smp = smp_ops(imx_smp_ops), 307 .map_io = imx6q_map_io, 308 .init_irq = imx6q_init_irq, 309 .init_machine = imx6q_init_machine, 310 .init_late = imx6q_init_late, 311 .dt_compat = imx6q_dt_compat, 312MACHINE_END 313