xref: /kernel/linux/linux-5.10/Documentation/devicetree/bindings/phy/phy-mtk-ufs.txt (revision 8c2ecf20)

MediaTek Universal Flash Storage (UFS) M-PHY binding
--------------------------------------------------------

UFS M-PHY nodes are defined to describe on-chip UFS M-PHY hardware macro.
Each UFS M-PHY node should have its own node.

To bind UFS M-PHY with UFS host controller, the controller node should
contain a phandle reference to UFS M-PHY node.

Required properties for UFS M-PHY nodes:
- compatible         : Compatible list, contains the following controller:
                       "mediatek,mt8183-ufsphy" for ufs phy
                       persent on MT81xx chipsets.
- reg                : Address and length of the UFS M-PHY register set.
- #phy-cells         : This property shall be set to 0.
- clocks             : List of phandle and clock specifier pairs.
- clock-names        : List of clock input name strings sorted in the same
                       order as the clocks property. Following clocks are
                       mandatory.
                       "unipro": Unipro core control clock.
                       "mp": M-PHY core control clock.

Example:

	ufsphy: phy@11fa0000 {
		compatible = "mediatek,mt8183-ufsphy";
		reg = <0 0x11fa0000 0 0xc000>;
		#phy-cells = <0>;

		clocks = <&infracfg_ao INFRACFG_AO_UNIPRO_SCK_CG>,
			 <&infracfg_ao INFRACFG_AO_UFS_MP_SAP_BCLK_CG>;
		clock-names = "unipro", "mp";
	};

	ufshci@11270000 {
		...
		phys = <&ufsphy>;
	};