xref: /kernel/linux/linux-5.10/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml

# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/mmc/cdns,sdhci.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Cadence SD/SDIO/eMMC Host Controller (SD4HC)

maintainers:
  - Masahiro Yamada <yamada.masahiro@socionext.com>
  - Piotr Sroka <piotrs@cadence.com>

allOf:
  - $ref: mmc-controller.yaml

properties:
  compatible:
    items:
      - enum:
          - socionext,uniphier-sd4hc
      - const: cdns,sd4hc

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  clocks:
    maxItems: 1

  # PHY DLL input delays:
  # They are used to delay the data valid window, and align the window to
  # sampling clock. The delay starts from 5ns (for delay parameter equal to 0)
  # and it is increased by 2.5ns in each step.

  cdns,phy-input-delay-sd-highspeed:
    description: Value of the delay in the input path for SD high-speed timing
    $ref: "/schemas/types.yaml#/definitions/uint32"
    minimum: 0
    maximum: 0x1f

  cdns,phy-input-delay-legacy:
    description: Value of the delay in the input path for legacy timing
    $ref: "/schemas/types.yaml#/definitions/uint32"
    minimum: 0
    maximum: 0x1f

  cdns,phy-input-delay-sd-uhs-sdr12:
    description: Value of the delay in the input path for SD UHS SDR12 timing
    $ref: "/schemas/types.yaml#/definitions/uint32"
    minimum: 0
    maximum: 0x1f

  cdns,phy-input-delay-sd-uhs-sdr25:
    description: Value of the delay in the input path for SD UHS SDR25 timing
    $ref: "/schemas/types.yaml#/definitions/uint32"
    minimum: 0
    maximum: 0x1f

  cdns,phy-input-delay-sd-uhs-sdr50:
    description: Value of the delay in the input path for SD UHS SDR50 timing
    $ref: "/schemas/types.yaml#/definitions/uint32"
    minimum: 0
    maximum: 0x1f

  cdns,phy-input-delay-sd-uhs-ddr50:
    description: Value of the delay in the input path for SD UHS DDR50 timing
    $ref: "/schemas/types.yaml#/definitions/uint32"
    minimum: 0
    maximum: 0x1f

  cdns,phy-input-delay-mmc-highspeed:
    description: Value of the delay in the input path for MMC high-speed timing
    $ref: "/schemas/types.yaml#/definitions/uint32"
    minimum: 0
    maximum: 0x1f

  cdns,phy-input-delay-mmc-ddr:
    description: Value of the delay in the input path for eMMC high-speed DDR timing

  # PHY DLL clock delays:
  # Each delay property represents the fraction of the clock period.
  # The approximate delay value will be
  # (<delay property value>/128)*sdmclk_clock_period.
    $ref: "/schemas/types.yaml#/definitions/uint32"
    minimum: 0
    maximum: 0x1f

  cdns,phy-dll-delay-sdclk:
    description: |
      Value of the delay introduced on the sdclk output for all modes except
      HS200, HS400 and HS400_ES.
    $ref: "/schemas/types.yaml#/definitions/uint32"
    minimum: 0
    maximum: 0x7f

  cdns,phy-dll-delay-sdclk-hsmmc:
    description: |
      Value of the delay introduced on the sdclk output for HS200, HS400 and
      HS400_ES speed modes.
    $ref: "/schemas/types.yaml#/definitions/uint32"
    minimum: 0
    maximum: 0x7f

  cdns,phy-dll-delay-strobe:
    description: |
      Value of the delay introduced on the dat_strobe input used in
      HS400 / HS400_ES speed modes.
    $ref: "/schemas/types.yaml#/definitions/uint32"
    minimum: 0
    maximum: 0x7f

required:
  - compatible
  - reg
  - interrupts
  - clocks

unevaluatedProperties: false

examples:
  - |
    emmc: mmc@5a000000 {
        compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
        reg = <0x5a000000 0x400>;
        interrupts = <0 78 4>;
        clocks = <&clk 4>;
        bus-width = <8>;
        mmc-ddr-1_8v;
        mmc-hs200-1_8v;
        mmc-hs400-1_8v;
        cdns,phy-dll-delay-sdclk = <0>;
    };