18c2ecf20Sopenharmony_ci*LM87 hwmon sensor.
28c2ecf20Sopenharmony_ci
38c2ecf20Sopenharmony_ciRequired properties:
48c2ecf20Sopenharmony_ci- compatible: Should be
58c2ecf20Sopenharmony_ci	"ti,lm87"
68c2ecf20Sopenharmony_ci
78c2ecf20Sopenharmony_ci- reg: I2C address
88c2ecf20Sopenharmony_ci
98c2ecf20Sopenharmony_cioptional properties:
108c2ecf20Sopenharmony_ci- has-temp3: This configures pins 18 and 19 to be used as a second
118c2ecf20Sopenharmony_ci             remote temperature sensing channel. By default the pins
128c2ecf20Sopenharmony_ci             are configured as voltage input pins in0 and in5.
138c2ecf20Sopenharmony_ci
148c2ecf20Sopenharmony_ci- has-in6: When set, pin 5 is configured to be used as voltage input
158c2ecf20Sopenharmony_ci           in6. Otherwise the pin is set as FAN1 input.
168c2ecf20Sopenharmony_ci
178c2ecf20Sopenharmony_ci- has-in7: When set, pin 6 is configured to be used as voltage input
188c2ecf20Sopenharmony_ci           in7. Otherwise the pin is set as FAN2 input.
198c2ecf20Sopenharmony_ci
208c2ecf20Sopenharmony_ci- vcc-supply: a Phandle for the regulator supplying power, can be
218c2ecf20Sopenharmony_ci              cofigured to measure 5.0V power supply. Default is 3.3V.
228c2ecf20Sopenharmony_ci
238c2ecf20Sopenharmony_ciExample:
248c2ecf20Sopenharmony_ci
258c2ecf20Sopenharmony_cilm87@2e {
268c2ecf20Sopenharmony_ci	compatible = "ti,lm87";
278c2ecf20Sopenharmony_ci	reg = <0x2e>;
288c2ecf20Sopenharmony_ci	has-temp3;
298c2ecf20Sopenharmony_ci	vcc-supply = <&reg_5v0>;
308c2ecf20Sopenharmony_ci};
31