xref: /device/soc/hisilicon/hi3516dv300/sdk_linux/include/aacdec.h

/*
 * Copyright (c) 2022 HiSilicon (Shanghai) Technologies CO., LIMITED.
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#ifndef __AACDEC_H__
#define __AACDEC_H__

#include "hi_type.h"

#ifdef __cplusplus
#if __cplusplus
extern "C" {
#endif /* __cpluscplus */
#endif /* __cpluscplus */

/********************************Macro Definition********************************/
/** \addtogroup      AACDEC */
/** @{ */ /** <!-- [AACDEC] */

#ifndef AAC_MAX_NCHANS
#define AAC_MAX_NCHANS 2
#endif
#define AAC_MAX_NSAMPS   1024
/*
 * according to spec (13818-7 section 8.2.2, 14496-3 section 4.5.3),
 * 6144 bits =  768 bytes per SCE or CCE-I,12288 bits = 1536 bytes per CPE
 */
#define AAC_MAINBUF_SIZE (768 * AAC_MAX_NCHANS)

#define AAC_NUM_PROFILES 3
#define AAC_PROFILE_MP   0
#define AAC_PROFILE_LC   1
#define AAC_PROFILE_SSR  2

#define AACDEC_VERSION_MAX_BYTE 64 /* version max byte size */

#ifndef HI_SUCCESS
#define HI_SUCCESS 0
#endif
/** @} */ /** <!-- ==== Macro Definition end ==== */

/*************************** Structure Definition ****************************/
/** \addtogroup      AACDEC */
/** @{ */ /** <!-- [AACDEC] */

/** Defines AACDEC error code */
typedef enum {
    ERR_AAC_NONE                          =   0,        /* no decode error */
    ERR_AAC_INDATA_UNDERFLOW              =  -1,        /* not enough input data */
    ERR_AAC_NULL_POINTER                  =  -2,        /* null pointer */
    ERR_AAC_INVALID_ADTS_HEADER           =  -3,        /* invalid adts header */
    ERR_AAC_INVALID_ADIF_HEADER           =  -4,        /* invalid adif header */
    ERR_AAC_INVALID_FRAME                 =  -5,        /* invalid frame */
    ERR_AAC_MPEG4_UNSUPPORTED             =  -6,        /* upsupport mpeg4 format */
    ERR_AAC_CHANNEL_MAP                   =  -7,        /* channel map error */
    ERR_AAC_SYNTAX_ELEMENT                =  -8,        /* element error */
    ERR_AAC_DEQUANT                       =  -9,        /* dequant error */
    ERR_AAC_STEREO_PROCESS                = -10,        /* stereo process error */
    ERR_AAC_PNS                           = -11,        /* pns process error */
    ERR_AAC_SHORT_BLOCK_DEINT             = -12,        /* reserved */
    ERR_AAC_TNS                           = -13,        /* TNS process error */
    ERR_AAC_IMDCT                         = -14,        /* IMDCT process error */
    ERR_AAC_NCHANS_TOO_HIGH               = -15,        /* unsupport mutil channel */
    ERR_AAC_SBR_INIT                      = -16,        /* SBR init error */
    ERR_AAC_SBR_BITSTREAM                 = -17,        /* SBR bitstream error */
    ERR_AAC_SBR_DATA                      = -18,        /* SBR data error */
    ERR_AAC_SBR_PCM_FORMAT                = -19,        /* SBR pcm data error */
    ERR_AAC_SBR_NCHANS_TOO_HIGH           = -20,        /* unsupport SBR multi channel */
    ERR_AAC_SBR_SINGLERATE_UNSUPPORTED    = -21,        /* SBR invalid samplerate */
    ERR_AAC_RAWBLOCK_PARAMS               = -22,        /* invalid RawBlock params */
    ERR_AAC_PS_INIT                       = -23,        /* PS init error */
    ERR_AAC_CH_MAPPING                    = -24,
    ERR_UNKNOWN                           = -9999,      /* reserved */
    ERR_AAC_OUT_OF_MEMORY                 = 2,          /* Heap returned NULL pointer.
                                                           Output buffer is invalid. */
    ERR_AAC_UNKNOWN                       = 5,          /* Error condition is of unknown reason, or from a another
                                                           module. Output buffer is invalid. */
    ERR_AAC_TRANSPORT_SYNC_ERROR          = 4097,       /* The transport decoder had syncronisation problems.
                                                           Do not exit decoding. Just feed new bitstream data. */
    ERR_AAC_NOT_ENOUGH_BITS               = 4098,       /* The input buffer ran out of bits. */
    ERR_AAC_TRANSPORT_FATAL_ERROR         = 4099,       /* The transport decoder occut fatal error. Reset Tranport */
    ERR_AAC_INVALID_HANDLE                = 8193,       /* The handle passed to the function call
                                                           was invalid (NULL). */
    ERR_AAC_UNSUPPORTED_AOT               = 8194,       /* The AOT found in the configuration is not supported. */
    ERR_AAC_UNSUPPORTED_FORMAT            = 8195,       /* The bitstream format is not supported.  */
    ERR_AAC_UNSUPPORTED_ER_FORMAT         = 8196,       /* The error resilience tool format is not supported. */
    ERR_AAC_UNSUPPORTED_EPCONFIG          = 8197,       /* The error protection format is not supported. */
    ERR_AAC_UNSUPPORTED_MULTILAYER        = 8198,       /* More than one layer for AAC scalable is not supported. */
    ERR_AAC_UNSUPPORTED_CHANNELCONFIG     = 8199,       /* The channel configuration (either number or arrangement)
                                                           is not supported. */
    ERR_AAC_UNSUPPORTED_SAMPLINGRATE      = 8200,       /* The sample rate specified in the configuration
                                                           is not supported. */
    ERR_AAC_INVALID_SBR_CONFIG            = 8201,       /* The SBR configuration is not supported. */
    ERR_AAC_SET_PARAM_FAIL                = 8202,       /* The parameter could not be set. Either the value was out
                                                           of range or the parameter does not exist. */
    ERR_AAC_NEED_TO_RESTART               = 8203,       /* The decoder needs to be restarted, since the requiered
                                                           configuration change cannot be performed. */
    ERR_AAC_TRANSPORT_ERROR               = 16385,      /* The transport decoder encountered an unexpected error. */
    ERR_AAC_PARSE_ERROR                   = 16386,      /* Error while parsing the bitstream. Most probably it is
                                                           corrupted, or the system crashed. */
    ERR_AAC_UNSUPPORTED_EXTENSION_PAYLOAD = 16387,      /* Error while parsing the extension payload of the bitstream.
                                                           The extension payload type found is not supported. */
    ERR_AAC_DECODE_FRAME_ERROR            = 16388,      /* The parsed bitstream value is out of range. Most probably
                                                           the bitstream is corrupt, or the system crashed. */
    ERR_AAC_CRC_ERROR                     = 16389,      /* The embedded CRC did not match. */
    ERR_AAC_INVALID_CODE_BOOK             = 16390,      /* An invalid codebook was signalled. Most probably the
                                                           bitstream is corrupt, or the system crashed. */
    ERR_AAC_UNSUPPORTED_PREDICTION        = 16391,      /* Predictor found, but not supported in the AAC Low
                                                           Complexity profile. Most probably the bitstream is
                                                           corrupt, or has a wrong format. */
    ERR_AAC_UNSUPPORTED_CCE               = 16392,      /* A CCE element was found which is not supported.
                                                           Most probably the bitstream is corrupt,
                                                           or has a wrong format. */
    ERR_AAC_UNSUPPORTED_LFE               = 16393,      /* A LFE element was found which is not supported.
                                                           Most probably the bitstream is corrupt,
                                                           or has a wrong format. */
    ERR_AAC_UNSUPPORTED_GAIN_CONTROL_DATA = 16394,      /* Gain control data found but not supported.
                                                           Most probably the bitstream is corrupt,
                                                           or has a wrong format. */
    ERR_AAC_UNSUPPORTED_SBA               = 16395,      /* SBA found, but currently not supported
                                                           in the BSAC profile. */
    ERR_AAC_TNS_READ_ERROR                = 16396,      /* Error while reading TNS data. Most probably
                                                           the bitstream is corrupt or the system crashed. */
    ERR_AAC_RVLC_ERROR                    = 16397,      /* Error while decoding error resillient data. */
    ERR_AAC_ANC_DATA_ERROR                = 32769,      /* Non severe error concerning the ancillary data handling. */
    ERR_AAC_TOO_SMALL_ANC_BUFFER          = 32770,      /* The registered ancillary data buffer is too small
                                                           to receive the parsed data. */
    ERR_AAC_TOO_MANY_ANC_ELEMENTS         = 32771,      /* More than the allowed number of ancillary data elements
                                                           should be written to buffer. */
} HI_AACDEC_ERR_E;

typedef struct _AACFrameInfo {
    int bitRate;
    int nChans;        /* channels,range:1,2 */
    int sampRateCore;  /* inner sample rate */
    int sampRateOut;   /* output samplerate */
    int bitsPerSample; /* bitwidth ,range:16 */
    int outputSamps;   /* output samples */
    int profile;       /* profile */
    int tnsUsed;       /* tns tools */
    int pnsUsed;       /* pns tools */
} AACFrameInfo;

typedef enum {
    AACDEC_ADTS = 0,
    AACDEC_LOAS = 1,
    AACDEC_LATM_MCP1 = 2,
} AACDECTransportType;

typedef void *HAACDecoder;

typedef struct hiAACDEC_VERSION_S {
    HI_U8 aVersion[AACDEC_VERSION_MAX_BYTE];
} AACDEC_VERSION_S;

/** @} */ /** <!-- ==== Structure Definition End ==== */

/******************************* API declaration *****************************/
/** \addtogroup      AACDEC */
/** @{ */ /** <!--  [AACDEC] */

/**
\brief Get version information.
\attention \n
N/A
\param[in] pVersion    :   version describe struct
\retval ::HI_SUCCESS   :   Success
\retval ::HI_FAILURE   :   pVersion is NULL, return HI_FAILURE
\see \n
N/A
*/
HI_S32 HI_AACDEC_GetVersion(AACDEC_VERSION_S *pVersion);

/**
\brief create and initial decoder device.
\attention \n
N/A
\param[in] enTranType   : transport type
\retval ::HAACDecoder   : init success, return non-NULL handle.
\retval ::NULL          : init failure, return NULL
\see \n
N/A
*/
HAACDecoder AACInitDecoder(AACDECTransportType enTranType);

/**
\brief destroy AAC-Decoder, free the memory.
\attention \n
N/A
\param[in] hAACDecoder  : AAC-Decoder handle
\see \n
N/A
*/
HI_VOID AACFreeDecoder(HAACDecoder hAACDecoder);

/**
\brief set RawMode before decode Raw Format aac bitstream(Reserved API, unused now.)
\attention \n
N/A
\param[in] hAACDecoder  : AAC-Decoder handle
\param[in] nChans       : inout channels
\param[in] sampRate     : input sampelrate
\retval ::HI_FAILURE    : RESERVED API, always return HI_FAILURE.
\see \n
N/A
*/
HI_S32 AACSetRawMode(HAACDecoder hAACDecoder, HI_S32 nChans, HI_S32 sampRate);

/**
\brief look for valid AAC sync header
\attention \n
N/A
\param[in] hAACDecoder      : AAC-Decoder handle
\param[in/out] ppInbufPtr   : address of the pointer of start-point of the bitstream
\param[in/out] pBytesLeft   : pointer to BytesLeft that indicates bitstream numbers at input buffer
\retval ::<0                : err, always return ERR_AAC_INDATA_UNDERFLOW
\retval ::other             : Success, return number bytes of current frame
\see \n
N/A
*/
HI_S32 AACDecodeFindSyncHeader(HAACDecoder hAACDecoder, HI_U8 **ppInbufPtr, HI_S32 *pBytesLeft);

/**
\brief decoding AAC frame and output 1024(LC) OR 2048(HEAAC/eAAC/eAAC+) 16bit PCM samples per channel.
\attention \n
\param[in] hAACDecoder       : AAC-Decoder handle
\param[in] ppInbufPtr        : address of the pointer of start-point of the bitstream
\param[in/out] pBytesLeft    : pointer to BytesLeft that indicates bitstream numbers at input buffer,
                               indicates the left bytes
\param[in] pOutPcm           : the address of the out pcm buffer,pcm data in noninterlaced fotmat: L/L/L/... R/R/R/...
\retval :: SUCCESS           : Success
\retval :: ERROR_CODE        : FAILURE, return error_code.
\see \n
N/A
*/
HI_S32 AACDecodeFrame(HAACDecoder hAACDecoder, HI_U8 **ppInbufPtr, HI_S32 *pBytesLeft, HI_S16 *pOutPcm);

/**
\brief get the frame information.
\attention \n
\param[in] hAACDecoder       : AAC-Decoder handle
\param[out] aacFrameInfo     : frame information
\retval :: HI_SUCCESS        : Success
\retval :: ERROR_CODE        : FAILURE, return error_code.
\see \n
N/A
*/
HI_S32 AACGetLastFrameInfo(HAACDecoder hAACDecoder, AACFrameInfo *aacFrameInfo);

/**
\brief set eosflag.
\attention \n
\param[in] hAACDecoder       : AAC-Decoder handle
\param[in] s32Eosflag        : end flag
\retval :: HI_SUCCESS        : Success
\retval :: ERROR_CODE        : FAILURE, return error_code.
\see \n
N/A
*/
HI_S32 AACDecoderSetEosFlag(HAACDecoder hAACDecoder, HI_S32 s32Eosflag);

/**
\brief flush internal codec state (after seeking, for example)
\attention \n
\param[in] hAACDecoder       : AAC-Decoder handle
\retval :: HI_SUCCESS        : Success
\retval :: ERROR_CODE        : FAILURE, return error_code.
\see \n
N/A
*/
HI_S32 AACFlushCodec(HAACDecoder hAACDecoder);

/**
\brief register sbrdec module
\attention \n
N/A
\param[in] pModuleHandle     : pointer to WorkHandle of sbrdec module
\retval :: HI_SUCCESS        : Success
\retval :: ERROR_CODE        : FAILURE, return error_code.
\see \n
N/A
*/
HI_S32 AACDecoderRegisterModule(HI_VOID *pModuleHandle);

/**
\brief Get WorkHandle of sbrdec module
\attention \n
N/A
\retval :: HI_VOID *          : pointer to WorkHandle of sbrdec module
\see \n
N/A
*/
HI_VOID *HI_AAC_SBRDEC_GetHandle(HI_VOID);

/** @} */ /** <!-- ==== API declaration end ==== */

#ifdef __cplusplus
#if __cplusplus
}
#endif /* __cpluscplus */
#endif /* __cpluscplus */

#endif /* __AACDEC_H__ */