# Copyright (c) 2021-2022 Huawei Device Co., Ltd.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

definitions: []
tests:
  - file-name: "sub2.64"
    isa:
      title: Two address binary operation on accumulator
      description: >
        Perform specified binary operation on accumulator and register and store result into accumulator
      exceptions:
        - x_none
    commands:
      - file-name: "op_vs_8_zero"
        isa:
          instructions:
            - sig: sub2.64 v:in:i64
              acc: inout:i64
              format: [op_v_8]
        code-template: |
          #
              ldai.64 0
              movi.64 v0, %s
              sub2.64 v0
              movi.64 v0, %s
              cmp.64 v0
        description: Check sub2.64 with zero and various values.
        cases:
          - values:
              - "0"
              - "0"
          - values:
              - "1"
              - "0xFFFFFFFFFFFFFFFF"
          - values:
              - "-1"
              - "1"
          - values:
              - "0x7FFFFFFFFFFFFFFF"
              - "0x8000000000000001"
          - values:
              - "-0x7FFFFFFFFFFFFFFF"
              - "0x7FFFFFFFFFFFFFFF"
          - values:
              - "0x8000000000000000"
              - "0x8000000000000000"
            bugid: ['966']
          - values:
              - "-0x8000000000000000"
              - "0x8000000000000000"
            bugid: ['966']
          - values:
              - "0xFFFFFFFFFFFFFFFF"
              - "1"
          - values:
              - "-0xFFFFFFFFFFFFFFFF"
              - "0xFFFFFFFFFFFFFFFF"

      - file-name: "op_vs_8_pone"
        isa:
          instructions:
            - sig: sub2.64 v:in:i64
              acc: inout:i64
              format: [op_v_8]
        code-template: |
          #
              ldai.64 1
              movi.64 v0, %s
              sub2.64 v0
              movi.64 v0, %s
              cmp.64 v0
        description: Check sub2.64 with +1 and various values.
        cases:
          - values:
              - "0"
              - "1"
          - values:
              - "1"
              - "0"
          - values:
              - "-1"
              - "2"
          - values:
              - "0x7FFFFFFFFFFFFFFF"
              - "0x8000000000000002"
          - values:
              - "-0x7FFFFFFFFFFFFFFF"
              - "0x8000000000000000"
            bugid: ['966']
          - values:
              - "0x8000000000000000"
              - "0x8000000000000001"
            bugid: ['966']
          - values:
              - "-0x8000000000000000"
              - "0x8000000000000001"
            bugid: ['966']
          - values:
              - "0xFFFFFFFFFFFFFFFF"
              - "2"
          - values:
              - "-0xFFFFFFFFFFFFFFFF"
              - "0"
      - file-name: "op_vs_8_none"
        isa:
          instructions:
            - sig: sub2.64 v:in:i64
              acc: inout:i64
              format: [op_v_8]
        code-template: |
          #
              ldai.64 -1
              movi.64 v0, %s
              sub2.64 v0
              movi.64 v0, %s
              cmp.64 v0
        description: Check sub2.64 with -1 and various values.
        cases:
          - values:
              - "0"
              - "-1"
          - values:
              - "1"
              - "-2"
          - values:
              - "-1"
              - "0"
          - values:
              - "0x7FFFFFFFFFFFFFFF"
              - "0x8000000000000000"
          - values:
              - "-0x7FFFFFFFFFFFFFFF"
              - "0x7FFFFFFFFFFFFFFE"
          - values:
              - "0x8000000000000000"
              - "0x7FFFFFFFFFFFFFFF"
          - values:
              - "-0x8000000000000000"
              - "0x7FFFFFFFFFFFFFFF"
          - values:
              - "0xFFFFFFFFFFFFFFFF"
              - "0"
          - values:
              - "-0xFFFFFFFFFFFFFFFF"
              - "0xFFFFFFFFFFFFFFFE"
      - file-name: "op_vs_8_pmax"
        isa:
          instructions:
            - sig: sub2.64 v:in:i64
              acc: inout:i64
              format: [op_v_8]
        code-template: |
          #
              ldai.64 0x7FFFFFFFFFFFFFFF
              movi.64 v0, %s
              sub2.64 v0
              movi.64 v0, %s
              cmp.64 v0
        description: Check sub2.64 with +max and various values.
        cases:
          - values:
              - "0"
              - "0x7FFFFFFFFFFFFFFF"
          - values:
              - "1"
              - "0x7FFFFFFFFFFFFFFE"
          - values:
              - "-1"
              - "0x8000000000000000"
            bugid: ['966']
          - values:
              - "0x7FFFFFFFFFFFFFFF"
              - "0"
          - values:
              - "-0x7FFFFFFFFFFFFFFF"
              - "0xFFFFFFFFFFFFFFFE"
            bugid: ['966']
          - values:
              - "0x8000000000000000"
              - "0xFFFFFFFFFFFFFFFF"
            bugid: ['966']
          - values:
              - "-0x8000000000000000"
              - "0xFFFFFFFFFFFFFFFF"
            bugid: ['966']
          - values:
              - "0xFFFFFFFFFFFFFFFF"
              - "0x8000000000000000"
            bugid: ['966']
          - values:
              - "-0xFFFFFFFFFFFFFFFF"
              - "0x7FFFFFFFFFFFFFFE"

      - file-name: "op_vs_8_nmax"
        isa:
          instructions:
            - sig: sub2.64 v:in:i64
              acc: inout:i64
              format: [op_v_8]
        code-template: |
          #
              ldai.64 -0x8000000000000000
              movi.64 v0, %s
              sub2.64 v0
              movi.64 v0, %s
              cmp.64 v0
        description: Check sub2.64 with -max and various values.
        cases:
          - values:
              - "0"
              - "0x8000000000000000"
          - values:
              - "1"
              - "0x7FFFFFFFFFFFFFFF"
            bugid: ['966']
          - values:
              - "-1"
              - "0x8000000000000001"
          - values:
              - "0x7FFFFFFFFFFFFFFF"
              - "1"
            bugid: ['966']
          - values:
              - "-0x7FFFFFFFFFFFFFFF"
              - "0xFFFFFFFFFFFFFFFF"
          - values:
              - "0x8000000000000000"
              - "0"
          - values:
              - "-0x8000000000000000"
              - "0"
          - values:
              - "0xFFFFFFFFFFFFFFFF"
              - "0x8000000000000001"
          - values:
              - "-0xFFFFFFFFFFFFFFFF"
              - "0x7FFFFFFFFFFFFFFF"
            bugid: ['966']

      - file-name: "vals"
        isa:
          instructions:
            - sig: sub2.64 v:in:i64
              acc: inout:i64
              format: [op_v_8]
        code-template: |
          #
              ldai.64 %s
              movi.64 v0, %s
              sub2.64 v0
              movi.64 v0, %s
              cmp.64 v0
        description: Check sub2.64 with various values.
        tags: ['tsan']
        cases:
          - values:
              - "0xCCF3DD187138D07E"
              - "0x35AC263B7B8703C4"
              - "0x9747B6DCF5B1CCBA"
          - values:
              - "0xD5F9EA52A84399E4"
              - "0x6883F597ADDC08E1"
              - "0x6D75F4BAFA679103"
            bugid: ['966']
          - values:
              - "0x2A79F082FFB71130"
              - "0x6DEE3B3E2F2DEAAE"
              - "0xBC8BB544D0892682"
          - values:
              - "0x74502029EFFFAB7E"
              - "0x233BE3208D8CCF83"
              - "0x51143D096272DBFB"
          - values:
              - "0xF7D7013B0725FBC0"
              - "0x3FD5EB0EB9786326"
              - "0xB801162C4DAD989A"
          - values:
              - "0xB779A757B3FD4653"
              - "0xD691F722BC859450"
              - "0xE0E7B034F777B203"
          - values:
              - "0xA6F57DD074EAAC42"
              - "0xB4725C193D93AB85"
              - "0xF28321B7375700BD"
          - values:
              - "0x1C870CC1E446CF6D"
              - "0xED7F524E5F2991DE"
              - "0x2F07BA73851D3D8F"
          - values:
              - "0x38118AA197B1FAB9"
              - "0xC7147EFF6911DD63"
              - "0x70FD0BA22EA01D56"
          - values:
              - "0x24DDD5A31111F41C"
              - "0x8CCCF02B129681BE"
              - "0x9810E577FE7B725E"
            bugid: ['966']

      - file-name: "regs"
        isa:
          instructions:
            - sig: sub2.64 v:in:i64
              acc: inout:i64
              format: [op_v_8]
        runner-options: ['compile-only']
        code-template: |
          #
              sub2.64 %s
        check-type: none
        description: Check sub2.64 with various register numbers.
        cases:
          - values:
            - "v255"
          - values:
              - "v256"
            runner-options: ['compile-failure']

      - file-name: "type"
        bugid: ["964", "966"]
        tags: ["verifier"]
        isa:
          verification:
            - acc_type
            - v1_type
        runner-options: ['verifier-failure', 'verifier-config']
        header-template: []
        code-template: |
          .record T {}
          .function i32 main() {
              %s
              *s
              sub2.64 v0
              ldai 0
        check-type: no-check
        description: Check 'sub2.64' with incorrect accumulator and/or register types.
        cases:
          - values:
            - ldai 0
          - values:
            - ldai.64 0
            id: acc_ok
          - values:
            - fldai 0
            bugid: ['7315']
          - values:
            - fldai.64 0
            bugid: ['7315']
          - values:
            - lda.null
          - values:
            - |
              #
                  movi v1, 0
                  newarr v1, v1, i32[]
                  lda.obj v1
          - values:
            - lda.str "0"
          - values:
            - lda.type T
          - values:
            - |
              #
                  newobj v1, T
                  lda.obj v1
        template-cases:
          - values:
            - movi v0, 0
          - values:
            - movi.64 v0, 0
            exclude: [acc_ok]
          - values:
            - fmovi v0, 0
            bugid: ['7315']
          - values:
            - fmovi.64 v0, 0
            bugid: ['7315']
          - values:
            - mov.null v0
          - values:
            - |
              #
                  movi v0, 0
                  newarr v0, v0, i32[]
          - values:
            - |
              #
                  lda.str "0"
                  sta.obj v0
          - values:
            - |
              #
                  lda.type T
                  sta.obj v0
          - values:
            - newobj v0, T


      - file-name: uninitialized_regs
        isa:
          instructions:
            - sig: sub2.64 v:in:i64
              acc: inout:i64
              format: [op_v_8]
        description: Check 'sub2.64' with uninitialized registers.
        tags: ['verifier']
        runner-options: ['verifier-failure', 'verifier-config']
        code-template: |
          #
              %s
              *s
              sub2.64 *s
        check-type: exit-positive
        template-cases:
          - values:
              - ''
          - values:
              - ldai.64 0
            exclude: [init]
        cases:
          - values:
              - ''
              - v0
          - values:
              - movi.64 v1, 0
              - v1
            id: init
          - values:
              - ''
              - v8
          - values:
              - ''
              - v15
          - values:
              - movi.64 v15, 0
              - v15
            id: init