# Copyright (c) 2021-2022 Huawei Device Co., Ltd.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

definitions: []
tests:
  - file-name: "shl2.64"
    isa:
      title: Two address binary operation on accumulator
      description: >
        Perform specified binary operation on accumulator and register and store result into accumulator
      exceptions:
        - x_none
    commands:
      - file-name: "op_vs_8_zero"
        isa:
          instructions:
            - sig: shl2.64 v:in:i64
              acc: inout:i64
              prefix: bit
              format: [pref_op_v_8]
        code-template: |
          #
              ldai.64 0
              movi.64 v0, %s
              mov.64 v1, v0
              shl2.64 v0
              movi.64 v0, 0
              cmp.64 v0
        description: Check shl2.64 with zero and various values.
        cases:
          - values:
              - "0"
          - values:
              - "1"
          - values:
              - "-1"
            bugid: ['1387']
          - values:
              - "0x7FFFFFFFFFFFFFFF"
            bugid: ['1387']
          - values:
              - "0x8000000000000000"
            bugid: ['1387']
          - values:
              - "-0x7FFFFFFFFFFFFFFF"
            bugid: ['1387']
          - values:
              - "-0x8000000000000000"
            bugid: ['1387']
          - values:
              - "0xFFFFFFFFFFFFFFFF"
            bugid: ['1387']
          - values:
              - "-0xFFFFFFFFFFFFFFFF"

      - file-name: "op_vs_8_pone"
        isa:
          instructions:
            - sig: shl2.64 v:in:i64
              acc: inout:i64
              prefix: bit
              format: [pref_op_v_8]
        code-template: |
          #
              ldai.64 1
              movi.64 v0, %s
              shl2.64 v0
              movi.64 v0, %s
              cmp.64 v0
        description: Check shl2.64 with +1 and various values.
        cases:
          - values:
              - "0"
              - "1"
          - values:
              - "1"
              - "2"
          - values:
              - "-1"
              - "0x8000000000000000"
            bugid: ['1387']
          - values:
              - "0x7FFFFFFFFFFFFFFF"
              - "0x8000000000000000"
            bugid: ['1387']
          - values:
              - "0x8000000000000000"
              - "1"
            bugid: ['1387']
          - values:
              - "-0x7FFFFFFFFFFFFFFF"
              - "2"
            bugid: ['1387']
          - values:
              - "-0x8000000000000000"
              - "1"
            bugid: ['1387']
          - values:
              - "0xFFFFFFFFFFFFFFFF"
              - "0x8000000000000000"
            bugid: ['1387']
          - values:
              - "-0xFFFFFFFFFFFFFFFF"
              - "2"
      - file-name: "op_vs_8_none"
        isa:
          instructions:
            - sig: shl2.64 v:in:i64
              acc: inout:i64
              prefix: bit
              format: [pref_op_v_8]
        code-template: |
          #
              ldai.64 -1
              movi.64 v0, %s
              shl2.64 v0
              movi.64 v0, %s
              cmp.64 v0
        description: Check shl2.64 with -1 and various values.
        cases:
          - values:
              - "0"
              - "0xFFFFFFFFFFFFFFFF"
          - values:
              - "1"
              - "0xFFFFFFFFFFFFFFFE"
          - values:
              - "-1"
              - "0x8000000000000000"
            bugid: ['1387']
          - values:
              - "0x7FFFFFFFFFFFFFFF"
              - "0x8000000000000000"
            bugid: ['1387']
          - values:
              - "0x8000000000000000"
              - "0xFFFFFFFFFFFFFFFF"
            bugid: ['1387']
          - values:
              - "-0x7FFFFFFFFFFFFFFF"
              - "0xFFFFFFFFFFFFFFFE"
            bugid: ['1387']
          - values:
              - "-0x8000000000000000"
              - "0xFFFFFFFFFFFFFFFF"
            bugid: ['1387']
          - values:
              - "0xFFFFFFFFFFFFFFFF"
              - "0x8000000000000000"
            bugid: ['1387']
          - values:
              - "-0xFFFFFFFFFFFFFFFF"
              - "0xFFFFFFFFFFFFFFFE"

      - file-name: "op_vs_8_pmax"
        isa:
          instructions:
            - sig: shl2.64 v:in:i64
              acc: inout:i64
              prefix: bit
              format: [pref_op_v_8]
        code-template: |
          #
              ldai.64 0x7FFFFFFFFFFFFFFF
              movi.64 v0, %s
              shl2.64 v0
              movi.64 v0, %s
              cmp.64 v0
        description: Check shl2.64 with +max and various values.
        cases:
          - values:
              - "0"
              - "0x7FFFFFFFFFFFFFFF"
          - values:
              - "1"
              - "0xFFFFFFFFFFFFFFFE"
          - values:
              - "-1"
              - "0x8000000000000000"
            bugid: ['1387']
          - values:
              - "0x7FFFFFFFFFFFFFFF"
              - "0x8000000000000000"
            bugid: ['1387']
          - values:
              - "0x8000000000000000"
              - "0x7FFFFFFFFFFFFFFF"
            bugid: ['1387']
          - values:
              - "-0x7FFFFFFFFFFFFFFF"
              - "0xFFFFFFFFFFFFFFFE"
            bugid: ['1387']
          - values:
              - "-0x8000000000000000"
              - "0x7FFFFFFFFFFFFFFF"
            bugid: ['1387']
          - values:
              - "0xFFFFFFFFFFFFFFFF"
              - "0x8000000000000000"
            bugid: ['1387']
          - values:
              - "-0xFFFFFFFFFFFFFFFF"
              - "0xFFFFFFFFFFFFFFFE"

      - file-name: "op_vs_8_nmax"
        isa:
          instructions:
            - sig: shl2.64 v:in:i64
              acc: inout:i64
              prefix: bit
              format: [pref_op_v_8]
        code-template: |
          #
              ldai.64 -0x8000000000000000
              movi.64 v0, %s
              shl2.64 v0
              movi.64 v0, %s
              cmp.64 v0
        description: Check shl2.64 with -max and various values.
        cases:
          - values:
              - "0"
              - "0x8000000000000000"
          - values:
              - "1"
              - "0"
          - values:
              - "-1"
              - "0"
            bugid: ['1387']
          - values:
              - "0x7FFFFFFFFFFFFFFF"
              - "0x0"
            bugid: ['1387']
          - values:
              - "0x8000000000000000"
              - "0x8000000000000000"
            bugid: ['1387']
          - values:
              - "-0x7FFFFFFFFFFFFFFF"
              - "0"
            bugid: ['1387']
          - values:
              - "-0x8000000000000000"
              - "0x8000000000000000"
            bugid: ['1387']
          - values:
              - "0xFFFFFFFFFFFFFFFF"
              - "0"
            bugid: ['1387']
          - values:
              - "-0xFFFFFFFFFFFFFFFF"
              - "0"

      - file-name: "vals"
        bugid: ['1387']
        tags: ['tsan']
        isa:
          instructions:
            - sig: shl2.64 v:in:i64
              acc: inout:i64
              prefix: bit
              format: [pref_op_v_8]
        code-template: |
          #
              ldai.64 %s
              movi.64 v0, %s
              shl2.64 v0
              movi.64 v0, %s
              cmp.64 v0
        description: Check shl2.64 with various values.
        cases:
          - values:
              - "0x909D078BC1802D11"
              - "0x3CF069C089440376"
              - "0x4440000000000000"
          - values:
              - "0x56FD0D313D987D81"
              - "0xC4ED2DCC568C4D51"
              - "0x1A627B30FB020000"
          - values:
              - "0x921DB78A744A870A"
              - "0x5D1BCD75637D2D0"
              - "0xB78A744A870A0000"
          - values:
              - "0xC81A9CDAB313C62E"
              - "0xCBF1E38A69AE2485"
              - "0x3539B566278C5C0"
          - values:
              - "0x6E6B999C47399E98"
              - "0xBE4E18F98146253B"
              - "0xC000000000000000"
          - values:
              - "0xD9020CE500F6672E"
              - "0x10025C5183770ED3"
              - "0x672807B339700000"
          - values:
              - "0x272F55E050FE5DA9"
              - "0xAC62C2429BD9D1B4"
              - "0xDA90000000000000"
          - values:
              - "0x26D9934D469195C2"
              - "0x89594AFB8577CA66"
              - "0xA465708000000000"
          - values:
              - "0x7465153CF3023766"
              - "0x7FF6D7F89184F0AF"
              - "0x1BB3000000000000"
          - values:
              - "0x9179FC5269D19418"
              - "0x7F3DE6693C80EC85"
              - "0x2F3F8A4D3A328300"

      - file-name: "regs"
        isa:
          instructions:
            - sig: shl2.64 v:in:i64
              acc: inout:i64
              prefix: bit
              format: [pref_op_v_8]
        runner-options: ['compile-only']
        code-template: |
          #
              shl2.64 %s
        check-type: none
        description: Check shl2.64 with various register numbers.
        cases:
          - values:
              - "v255"
          - values:
              - "v256"
            runner-options: ['compile-failure']

      - file-name: "type"
        bugid: ["964", "966"]
        tags: ["verifier"]
        isa:
          verification:
            - acc_type
            - v1_type
        runner-options: ['verifier-failure', 'verifier-config']
        header-template: []
        code-template: |
          .record T {}
          .function i32 main() {
              %s
              *s
              shl2.64 v0
              ldai 0
        check-type: no-check
        description: Check 'shl2.64' with incorrect accumulator and/or register types.
        cases:
          - values:
            - ldai 0
          - values:
            - ldai.64 0
            id: acc_ok
          - values:
            - fldai 0
            bugid: ['7315']
          - values:
            - fldai.64 0
            bugid: ['7315']
          - values:
            - lda.null
          - values:
            - |
              #
                  movi v1, 0
                  newarr v1, v1, i32[]
                  lda.obj v1
          - values:
            - lda.str "0"
          - values:
            - lda.type T
          - values:
            - |
              #
                  newobj v1, T
                  lda.obj v1
        template-cases:
          - values:
            - movi v0, 0
          - values:
            - movi.64 v0, 0
            exclude: [acc_ok]
          - values:
            - fmovi v0, 0
            bugid: ['7315']
          - values:
            - fmovi.64 v0, 0
            bugid: ['7315']
          - values:
            - mov.null v0
          - values:
            - |
              #
                  movi v0, 0
                  newarr v0, v0, i32[]
          - values:
            - |
              #
                  lda.str "0"
                  sta.obj v0
          - values:
            - |
              #
                  lda.type T
                  sta.obj v0
          - values:
            - newobj v0, T


      - file-name: uninitialized_regs
        isa:
          instructions:
            - sig: shl2.64 v:in:i64
              acc: inout:i64
              prefix: bit
              format: [pref_op_v_8]
        description: Check 'shl2.64' with uninitialized registers.
        tags: ['verifier']
        runner-options: ['verifier-failure', 'verifier-config']
        code-template: |
          #
              %s
              *s
              shl2.64 *s
        check-type: exit-positive
        template-cases:
          - values:
              - ''
          - values:
              - ldai.64 0
            exclude: [init]
        cases:
          - values:
              - ''
              - v0
          - values:
              - movi.64 v1, 0
              - v1
            id: init
          - values:
              - ''
              - v8
          - values:
              - ''
              - v15
          - values:
              - movi.64 v15, 0
              - v15
            id: init