# Copyright (c) 2021-2022 Huawei Device Co., Ltd.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

definitions: []
tests:
  - file-name: "fmod2.64"
    isa:
      title: Two address floating-point binary operation on accumulator
      description: >
        Perform specified floating-point binary operation on accumulator and register and store result into accumulator.
        The results of instructions correspond IEEE-754 arithmetic rules.
      exceptions:
        - x_none
    commands:
      - file-name: "op_vs_8_nan"
        isa:
          instructions:
            - sig: fmod2.64 v:in:f64
              acc: inout:f64
              format: [op_v_8]
          description: Any operation with NaN results to NaN value.
        check-type: check-acc-nan-f64
        tags: ['irtoc_ignore']
        code-template: |
          #
              fldai.64 %s
              fmovi.64 v0, *s
              fmod2.64 v0
        description: >
          Check fmod2.64 results in NaN when acc or v0 is NaN
        template-cases:
          - values:
              # NaN
              - "0x7ff8000000000000"
          - values:
              # NaN representation
              - "0xFFFFFFFFFFFFFFFF"
          - values:
              - "0"
            exclude: [hasval]
          - values:
              # Negative zero
              # -0.0d
              - "0x8000000000000000"
            exclude: [hasval]
          - values:
              - "1"
            exclude: [hasval]
          - values:
              - "-1"
            exclude: [hasval]
          - values:
              # +Inf
              - "0x7ff0000000000000"
            exclude: [hasval]
          - values:
              # -Inf
              - "0xfff0000000000000"
            exclude: [hasval]
          - values:
            # +max
            - "0x7fefffffffffffff"
            exclude: [hasval]
          - values:
            # -max
            - "0xffefffffffffffff"
            exclude: [hasval]
          - values:
            # +min
            - "0x0000000000000001"
            exclude: [hasval]
          - values:
            # -min
            - "0x8000000000000001"
            exclude: [hasval]
          - values:
              - "3.14159265358979323846"
            exclude: [hasval]
          - values:
              - "1234567890987654321"
            exclude: [hasval]
        cases:
          - values:
              # NaN
              - "0x7ff8000000000000"
          - values:
              # NaN
              - "0xFFFFFFFFFFFFFFFF"
          - values:
              - "0"
            id: hasval
            bugid: ['3846']
          - values:
              # Negative zero
              # -0.0d
              - "0x8000000000000000"
            id: hasval
            bugid: ['3846']
          - values:
              - "1"
            id: hasval
          - values:
              - "-1"
            id: hasval
          - values:
              # +Inf
              - "0x7ff0000000000000"
            id: hasval
          - values:
              # -Inf
              - "0xfff0000000000000"
            id: hasval
          - values:
              # +max
              - "0x7fefffffffffffff"
            id: hasval
          - values:
              # -max
              - "0xffefffffffffffff"
            id: hasval
          - values:
              # +min
              - "0x0000000000000001"
            id: hasval
          - values:
              # -min
              - "0x8000000000000001"
            id: hasval
          - values:
              - "3.14159265358979323846"
            id: hasval
          - values:
              - "1234567890987654321"
            id: hasval

      - file-name: "op_vs_8_pinf"
        isa:
          instructions:
            - sig: fmod2.64 v:in:f64
              acc: inout:f64
              format: [op_v_8]
        check-type: check-acc-nan-f64
        tags: ['irtoc_ignore']
        code-template: |
            #
                fldai.64 0x7ff0000000000000 # +Inf
                fmovi.64 v0, %s
            # Mod of +Inf and value
                fmod2.64 v0
        description: Check fmod2.64 with positive Inf and various values (NaN, Inf, min, max, numbers).
        cases:
          - values:
              # NaN
              - "0x7ff8000000000000"
          - values:
              # NaN
              - "0xFFFFFFFFFFFFFFFF"
          - values:
              - "0"
            bugid: ['3846']
          - values:
              # -0.0
              - "0x8000000000000000"
            bugid: ['3846']
          - values:
              - "1"
          - values:
             - "-1"
          - values:
              # +Inf
              - "0x7ff0000000000000"
          - values:
              # -Inf
              - "0xfff0000000000000"
          - values:
              # +max
              - "0x7fefffffffffffff"
          - values:
              # -max
              - "0xffefffffffffffff"
          - values:
              # +min
              - "0x0000000000000001"
          - values:
              # -min
              - "0x8000000000000001"
          - values:
              - "3.14159265358979323846"
          - values:
              - "1234567890987654321"

      - file-name: "op_vs_8_ninf"
        isa:
          instructions:
            - sig: fmod2.64 v:in:f64
              acc: inout:f64
              format: [op_v_8]
        check-type: check-acc-nan-f64
        tags: ['irtoc_ignore']

        code-template: |
            #
                fldai.64 0xfff0000000000000 # -Inf
                fmovi.64 v0, %s
            # Mod of -Inf and value
                fmod2.64 v0
        description: Check fmod2.64 with negative Inf and various values (NaN, Inf, min, max, numbers).
        cases:
            - values:
                # NaN
                - "0x7ff8000000000000"
            - values:
                # NaN
                - "0xFFFFFFFFFFFFFFFF"
            - values:
                - "0"
              bugid: ['3846']
            - values:
                # -0.0d
                - "0x8000000000000000"
              bugid: ['3846']
            - values:
                - "1"
            - values:
                - "-1"
            - values:
                # +Inf
                - "0x7ff0000000000000"
            - values:
                # -Inf
                - "0xfff0000000000000"
            - values:
                # +max
                - "0x7fefffffffffffff"
            - values:
                # -max
                - "0xffefffffffffffff"
            - values:
                # +min
                - "0x0000000000000001"
            - values:
                # -min
                - "0x8000000000000001"
            - values:
                - "3.14159265358979323846"
            - values:
                - "1234567890987654321"

      - file-name: "op_vs_8_inf_nan"
        isa:
          instructions:
            - sig: fmod2.64 v:in:f64
              acc: inout:f64
              format: [op_v_8]
          description: >
            Division is NaN if Infinity is divided by Infinity.
        tags: ['irtoc_ignore']
        check-type: check-acc-nan-f64
        code-template: |
            #
                fldai.64 %s
                fmovi.64 v0, *s
            # Modulo of Inf by Inf
                fmod2.64 v0
        description: >
          Check fmod2.64 of Inf by Inf is NaN. (Case of Modulo)
        template-cases:
          - values: ["0x7ff0000000000000"]
          - values: ["0xfff0000000000000"]
        cases:
          - values: ["0x7ff0000000000000"]
          - values: ["0xfff0000000000000"]

      - file-name: "op_vs_8_pzero"
        isa:
          instructions:
            - sig: fmod2.64 v:in:f64
              acc: inout:f64
              format: [op_v_8]
        check-type: check-positive
        tags: ['irtoc_ignore']
        code-template: |
            #
                fldai.64 0.0 #
                fmovi.64 v0, %s
            # Mod of +0.0 and value
                fmod2.64 v0
                fmovi.64 v1, %s
                fcmpg.64 v1
        description: Check fmod2.64 with +0 and various values (NaN, Inf, min, max, numbers).
        cases:
            - values:
                # +Inf
                - "0x7ff0000000000000"
                - "0"
            - values:
                # -Inf
                - "0xfff0000000000000"
                - "0"
            - values:
                # 1d
                - "1"
                - "0"
            - values:
                - "-1"
                # -0.0
                - "0x8000000000000000"

            - values:
                # +max
                - "0x7fefffffffffffff"
                - "0"
            - values:
                # -max
                - "0xffefffffffffffff"
                # -0.0
                - "0x8000000000000000"
            - values:
                # +min
                - "0x0000000000000001"
                - "0"
            - values:
                # -min
                - "0x8000000000000001"
                # -0.0
                - "0x8000000000000000"
            - values:
                # Some FP value, 3.14159265358979323846
                - "3.14159265358979323846"
                - "0"

      - file-name: "op_vs_8_nzero"
        isa:
          instructions:
            - sig: fmod2.64 v:in:f64
              acc: inout:f64
              format: [op_v_8]
        check-type: check-positive
        tags: ['irtoc_ignore']
        code-template: |
            #
                fldai.64 -0.0 #
                fmovi.64 v0, %s
            # Mod of -0.0 and value
                fmod2.64 v0
                fmovi.64 v1, %s
                fcmpg.64 v1
        description: Check fmod2.64 with -0 and various values (NaN, Inf, min, max, numbers).
        cases:
          - values:
              # +Inf
              - "0x7ff0000000000000"
              - "0"
          - values:
              # -Inf
              - "0xfff0000000000000"
              - "0"
          - values:
              - "1"
              # -0.0d
              - "0x8000000000000000"
          - values:
              - "-1"
              - "0"
          - values:
              # +max
              - "0x7fefffffffffffff"
              # -0.0d
              - "0x8000000000000000"
          - values:
              # -max
              - "0xffefffffffffffff"
              - "0"
          - values:
              # +min
              - "0x0000000000000001"
              # -0.0d
              - "0x8000000000000000"
          - values:
              # -min
              - "0x8000000000000001"
              - "0"
          - values:
              - "3.14159265358979323846"
              # -0.0d
              - "0x8000000000000000"
          - values:
              # Some FP value,
              - "-3.14159265358979323846"
              - "0"

      - file-name: "op_vs_8_pone"
        isa:
          instructions:
            - sig: fmod2.64 v:in:f64
              acc: inout:f64
              format: [op_v_8]
        check-type: check-positive
        tags: ['irtoc_ignore']
        code-template: |
            #
                fldai.64 1.0 #
                fmovi.64 v0, %s
            # Mod of 1.0 and value
                fmod2.64 v0
                fmovi.64 v1, %s
                fcmpg.64 v1
        description: Check fmod2.64 with +1 and various values (NaN, Inf, min, max, numbers).
        cases:
          - values:
              - "1"
              - "0"
          - values:
              - "-1"
              - "0"
          - values:
              # +Inf
              - "0x7ff0000000000000"
              - "1"
          - values:
              # -Inf
              - "0xfff0000000000000"
              - "1"
          - values:
              # +max
              - "0x7fefffffffffffff"
              - "1"
          - values:
              # -max
              - "0xffefffffffffffff"
              - "1"
          - values:
              # +min
              - "0x0000000000000001"
              - "0"
          - values:
              # -min
              - "0x8000000000000001"
              - "0"
          - values:
              # Some FP value,
              - "3.14159265358979323846"
              - "1"
          - values:
              - "-3.14159265358979323846"
              - "1"
          - values:
              - "1234567890.987654321"
              - "1"

      - file-name: "op_vs_8_none"
        isa:
          instructions:
            - sig: fmod2.64 v:in:f64
              acc: inout:f64
              format: [op_v_8]
        check-type: check-positive
        tags: ['irtoc_ignore']
        code-template: |
            #
                fldai.64 -1.0 #
                fmovi.64 v0, %s
            # Mod of -1.0 and value
                fmod2.64 v0
                fmovi.64 v1, %s
                fcmpg.64 v1
        description: Check fmod2.64 with -1 and various values (NaN, Inf, min, max, numbers).
        cases:
          - values:
              - "1"
              - "-0.0"
          - values:
              - "-1"
              - "-0.0"
          - values:
              # +Inf
              - "0x7ff0000000000000"
              - "-1"
          - values:
              # -Inf
              - "0xFFF0000000000000"
              - "-1"
          - values:
              # +max
              - "0x7fefffffffffffff"
              - "-1"
          - values:
              # -max
              - "0xffefffffffffffff"
              - "-1"
          - values:
              # +min
              - "0x0000000000000001"
              - "-0.0"
          - values:
              # -min
              - "0x8000000000000001"
              - "-0.0"
          - values:
              # Some FP value,
              - "3.14159265358979323846"
              - "-1"
          - values:
              - "-3.14159265358979323846"
              - "-1"
          - values:
              - "1234567890.987654321"
              - "-1"

      - file-name: "op_vs_8"
        isa:
          instructions:
            - sig: fmod2.64 v:in:f64
              acc: inout:f64
              format: [op_v_8]
        check-type: check-positive
        tags: ['irtoc_ignore']
        code-template: |
            #
                fldai.64 %s #
                fmovi.64 v0, %s
            # Mod of -1.0 and value
                fmod2.64 v0
                fmovi.64 v1, %s
                fcmpg.64 v1
        description: Check fmod2.64 with various values.
        cases:
            - values:
                - "1.0"
                - "-1.0"
                - "0.0"
            - values:
                - "1.0"
                - "1.0"
                - "0.0"
            - values:
                - "-1.0"
                - "1.0"
                - "0.0"
            - values:
                - "1.0e100"
                - "1.0e100"
                - "0.0"
            - values:
                - "1.0e100"
                - "-1.0e100"
                - "-0.0"
            - values:
                - "1.0e+100"
                - "1.0e-100"
                - "9.885752855515831e-101"
            - values:
                - "-1.0e100"
                - "1.0e100"
                - "-0.0"
            - values:
                - "-1.0e-100"
                - "1.0e-100"
                - "-0.0"
            - values:
                - "-1.0e+100"
                - "-1.0e-100"
                - "-9.885752855515831e-101"
            - values:
                - "3.14159265358979323846"
                - "-3.14159265358979323846"
                - "0.0"
            - values:
                - "3.14159265358979323846e100"
                - "-3.14159265358979323846e100"
                - "-0.0"
#            - values:
#              # TODO add test cases for maximal and minimal FP value in decimal scientific literal

      - file-name: "op_vs_8_max"
        isa:
          instructions:
            - sig: fmod2.64 v:in:f64
              acc: inout:f64
              format: [op_v_8]
        check-type: check-positive
        tags: ['irtoc_ignore']
        code-template: |
            #
                fldai.64 %s
                fmovi.64 v0, %s
            # Mod of two values
                fmod2.64 v0
                fmovi.64 v1, 0
                fcmpg.64 v1
        description: Check fmod2.64 with various maximal values.
        cases:
          - values:
              # +max
              - "0x7fefffffffffffff"
              # +max
              - "0x7fefffffffffffff"
          - values:
              # -max
              - "0xffefffffffffffff"
              - "0xffefffffffffffff"
          - values:
              # +max
              - "0x7fefffffffffffff"
              # -max
              - "0xffefffffffffffff"
          - values:
              # +max
              - "0x7fefffffffffffff"
              - "1"
          - values:
              # +max
              - "0x7fefffffffffffff"
              - "-1"
          - values:
              # -max
              - "0xffefffffffffffff"
              - "1"
          - values:
              # -max
              - "0xffefffffffffffff"
              - "-1"

      - file-name: "op_vs_8_zeroes_nan"
        isa:
          instructions:
            - sig: fmod2.64 v:in:f64
              acc: inout:f64
              format: [op_v_8]
        check-type: check-acc-nan-f64
        tags: ['irtoc_ignore']
        code-template: |
            #
                fldai.64 %s #
                fmovi.64 v0, %s
            # Mod of -1.0 and value
                fmod2.64 v0
        description: Check fmod2.64 with zeroes.
        bugid: ['3846']
        cases:
            - values:
                - "0.0"
                - "0.0"
            - values:
                - "0.0"
                - "-0.0"
            - values:
                - "-0.0"
                - "0.0"
            - values:
                - "-0.0"
                - "-0.0"

      - file-name: "incorrect_reg"
        isa:
          instructions:
            - sig: fmod2.64 v:in:f64
              acc: inout:f64
              format: [op_v_8]
        check-type: none
        runner-options: [compile-failure]
        description: Check fmod2.64 with incorrect register numbers.
        code-template: |
          #
              fmod2.64 %s
        cases:
          - values: [v256]
          - values: [v65535]
          - values: [a0]
          - values: [a255]
          - values: ['null']
          - values: [0]
          - values: [1.1]
          - values: ['2.2']

      - file-name: "reg_number"
        isa:
          instructions:
            - sig: fmod2.64 v:in:f64
              acc: inout:f64
              format: [op_v_8]
        check-type: none
        runner-options: [compile-only]
        description: Check fmod2.64 with correct register numbers.
        code-template: |
          #
              fmod2.64 %s
        cases:
          - values: [v0]
          - values: [v16]
          - values: [v128]
          - values: [v255]

      - file-name: "calc"
        isa:
          instructions:
            - sig: fmod2.64 v:in:f64
              acc: inout:f64
              format: [op_v_8]
        check-type: check-positive
        code-template: |
            #
                fldai.64 %s #
                fmovi.64 v0, %s
                fmod2.64 v0
                fmovi.64 v1, %s
                fcmpg.64 v1
        description: Check fmod2.64 with various values.
        tags: ['tsan', 'irtoc_ignore']
        cases:
          - values:
              - "0.12018311893073663"
              - "-0.025131139878436515"
              - "0.019658559416990573"
          - values:
              - "0.22440258667093504"
              - "0.29473667141886917"
              - "0.22440258667093504"
          - values:
              - "0.3033862126622541"
              - "-0.3756010672721948"
              - "0.3033862126622541"
          - values:
              - "0.2936997127243267"
              - "-0.1764426330424449"
              - "0.11725707968188182"
          - values:
              - "-0.09956939773023954"
              - "-0.3877892950497467"
              - "-0.09956939773023954"
          - values:
              - "0.3314930901944054"
              - "-0.13506203672501027"
              - "0.061369016744384886"
          - values:
              - "0.12451977351331212"
              - "-0.39010722580021084"
              - "0.12451977351331212"
          - values:
              - "0.22556927027597906"
              - "-0.3969391565251753"
              - "0.22556927027597906"
          - values:
              - "-0.35731514337836257"
              - "0.3968803690491226"
              - "-0.35731514337836257"
          - values:
              - "0.16934379656892917"
              - "0.40037033331415206"
              - "0.16934379656892917"
          - values:
              - "2.764634450793475e-72"
              - "2.0593829964602962e61"
              - "2.764634450793475e-72"
          - values:
              - "4.290222845632546e-94"
              - "-5.310600113825947e93"
              - "4.290222845632546e-94"
          - values:
              - "2.814056900722342e-31"
              - "2.4791336743619776e78"
              - "2.814056900722342e-31"
          - values:
              - "-4.372802884913136e-54"
              - "-1.61600705349081e30"
              - "-4.372802884913136e-54"
          - values:
              - "-1.4731713675366709e13"
              - "-3.3542106259826996e91"
              - "-1.4731713675366709e13"
          - values:
              - "-1.88388347188423"
              - "-1.999969914515257e-71"
              - "-1.833137632695426e-71"
          - values:
              - "3.938475013167094e-93"
              - "1.7543416973210034e72"
              - "3.938475013167094e-93"
          - values:
              - "2.2405919845682808e21"
              - "-3.4260926065796194e48"
              - "2.2405919845682808e21"
          - values:
              - "-6.920653318603553e47"
              - "-1.3028837314073981e-65"
              - "-1.200852789951636e-65"
          - values:
              - "-4.407583571028892e-90"
              - "-0.0031674185526174184"
              - "-4.407583571028892e-90"

      - file-name: "type"
        isa:
            instructions:
              - sig: fmod2.64 v:in:f64
                acc: inout:f64
                format: [op_v_8]
            verification:
              - acc_type
              - v1_type
        tags: ['verifier']
        runner-options: ['verifier-failure', 'verifier-config']
        header-template: []
        code-template: |
          #
          .record A {}
          .record B {}
          .record panda.String <external>
          .record panda.Object <external>
          .function i32 main() {
              %s
              *s
              fmod2.64 v0
        check-type: exit-positive
        description: Check 'fmod2.64' with incorrect register and accumulator type.
        template-cases:
          - values:
              - movi v0, 0
          - values:
              - movi.64 v0, 0
          - values:
              - fmovi v0, 0
            bugid: ['7315']
          - values:
              - fmovi.64 v0, 0
            exclude: [val]
          - values:
              - |
                #
                    lda.type B
                    sta.obj v0
          - values:
              - |
                #
                    lda.type B[]
                    sta.obj v0
          - values:
              - |
                #
                    lda.type panda.String
                    sta.obj v0
          - values:
              - |
                #
                    lda.str "string"
                    sta.obj v0
          - values:
              - |
                #
                    movi v0, 10
                    newarr v0, v0, i32[]
          - values:
              - mov.null v0

        cases:
          - values:
              - ldai 0
          - values:
              - ldai.64 0
          - values:
              - fldai 0
            bugid: ['7315']
          - values:
              - fldai.64 0
            id: val
          - values:
              - |
                #
                    lda.type A
          - values:
              - |
                #
                    lda.type A[]
          - values:
              - |
                #
                    lda.type panda.String
          - values:
              - |
                #
                    lda.str "string"
          - values:
              - |
                #
                    movi v1, 10
                    newarr v1, v1, f64[]
                    lda.obj v1
          - values:
              - lda.null

      - file-name: uninitialized_regs
        isa:
          instructions:
            - sig: fmod2.64 v:in:f64
              acc: inout:f64
              format: [op_v_8]
        description: Check 'fmod2.64' with uninitialized register and accumulator.
        tags: ['verifier']
        runner-options: ['verifier-failure', 'verifier-config']
        code-template: |
            #
                %s
                *s
                fmod2.64 %s
        check-type: exit-positive
        template-cases:
          - values:
              - ''
              - v0
          - values:
              - fmovi.64 v0, 0
              - v0
            exclude: [init]
          - values:
              - ''
              - v7
          - values:
              - ''
              - v15
          - values:
              - fmovi.64 v15, 0
              - v15
            exclude: [init]
          - values:
              - ''
              - v128
          - values:
              - fmovi.64 v128, 0
              - v128
            exclude: [init]
          - values:
              - ''
              - v255
          - values:
              - fmovi.64 v255, 0
              - v255
            exclude: [init]
        cases:
          - values:
              - ''
          - values:
              - fldai.64 0
            id: init