Lines Matching defs:ME
55 #define ME "scsimain: "
669 snprintf(ebuff, EBUFF_SZ, ME "Error closing %s ",
671 perror(ME "close error");
692 ME "Error opening %s ", fname);
701 ME "device %s failed on scsi ioctl, skip",
709 snprintf(ebuff, EBUFF_SZ, ME "device %s failed on scsi "
719 ME "device %s failed on sg ioctl(3), skip",
743 ME "device %s ioctls(4), skip", fname);
781 snprintf(ebuff, EBUFF_SZ, ME "device %s writing, skip",
789 snprintf(ebuff, EBUFF_SZ, ME "device %s reading, skip",
845 perror(ME "Inquiry SG_IO ioctl error");
891 printf(ME "mx_resp_len too big\n");
924 snprintf(ebuff, EBUFF_SZ, ME "ppc=%d, sp=%d, "
1494 snprintf(ebuff, EBUFF_SZ, ME "error opening file: %s",
1501 printf(ME "%s doesn't seem to be a version 3 sg device\n",
1953 ME "for 6 byte commands, maximum number of "
1959 ME "for 6 byte commands, can't address blocks"
1965 ME "for 6 byte commands, neither dpo nor fua"
1982 ME "for 10 byte commands, maximum number of "
2016 ME "expected cdb size of 6, 10, 12, or 16 but got"
2034 ME "bad rd cdb build, from_block=%d, blocks=%d\n",
2100 fprintf(stderr, ME "bad wr cdb build, to_block=%d, blocks=%d\n",
2244 fprintf(stderr, ME "if=%s skip=%d of=%s seek=%d count=%d\n",
2262 ME "unable to use scsi tape device %s\n", inf);
2267 ME "could not open %s for sg reading",
2275 perror(ME "SG_SET_RESERVED_SIZE error");
2280 ME
2285 ME
2296 ME "could not open %s for reading",
2306 ME
2324 ME "unable to use scsi tape device %s\n", outf);
2329 ME "could not open %s for sg writing",
2337 perror(ME "SG_SET_RESERVED_SIZE error");
2341 ME "sg driver prior to 3.x.y\n");
2356 ME
2365 ME
2378 ME
2525 ME "reading, skip=%d ", skip);
2582 ME "writing, seek=%d ", seek);
3418 printf(ME "mx_resp_len too big\n");
3688 snprintf(ebuff, EBUFF_SZ, ME "error opening file: %s",
3695 printf(ME "%s doesn't seem to be a version 3 sg device\n",
3704 printf(ME "%s doesn't respond to a SCSI INQUIRY\n",
3860 perror(ME "open error");
3866 printf(ME "not a sg device, or driver prior to 3.x\n");
3874 printf(ME "out of memory (query)\n");
3896 perror(ME "SG_IO READ BUFFER descriptor error");
3942 perror(ME "SG_SET_RESERVED_SIZE error");
3949 printf(ME "mmap() out of memory, try a smaller "
3953 perror(ME "error using mmap()");
3959 printf(ME "out of memory (data)\n");
4009 printf(ME
4014 perror(ME "SG_IO READ BUFFER data error");
4082 perror(ME "close error");
4160 ME "lba can only be non-zero when pmi is set\n");
4165 snprintf(ebuff, EBUFF_SZ, ME "error opening file: %s",
4172 printf(ME "%s doesn't seem to be a version 3 sg device\n",
4380 printf(ME "mx_resp_len too big\n");
4440 snprintf(ebuff, EBUFF_SZ, ME "error opening file: %s",
4447 printf(ME "%s doesn't seem to be a version 3 sg device\n",
6148 ME "bad rd cdb build, from_block=%d, blocks=%d\n",
6214 fprintf(stderr, ME "bad wr cdb build, to_block=%d, blocks=%d\n",
6319 fprintf(stderr, ME "unable to use scsi tape device %s\n", inf);
6324 ME "could not open %s for sg reading", inf);
6330 fprintf(stderr, ME "sg driver prior to 3.1.22\n");
6337 perror(ME "SG_GET_RESERVED_SIZE error");
6342 perror(ME "SG_SET_RESERVED_SIZE error");
6350 ME "error using mmap() on file: %s", inf);
6357 ME "could not open %s for reading", inf);
6365 snprintf(ebuff, EBUFF_SZ, ME "couldn't skip to "
6378 ME "unable to use scsi tape device %s\n", outf);
6383 ME "could not open %s for "
6391 ME "sg driver prior to 3.1.22\n");
6395 perror(ME "SG_GET_RESERVED_SIZE error");
6403 perror(ME "SG_SET_RESERVED_SIZE error");
6414 ME
6429 ME
6438 ME "could not open %s "
6450 ME "couldn't seek to "
6618 ME "reading, skip=%d ", skip);
6663 ME "writing, seek=%d ", seek);
6768 fprintf(stderr, ME "interrupted by SIGINT\n");
7012 fprintf(stderr, ME "inputting to sg failed, blk=%d\n",
7081 ME "outputting from sg failed, blk=%d\n",
7145 fprintf(stderr, ME "bad cdb build, start_blk=%d, blocks=%d\n",
7259 fprintf(stderr, ME "sg driver prior to 3.x.y\n");
7266 perror(ME "SG_SET_RESERVED_SIZE error");
7270 perror(ME "SG_SET_FORCE_PACK_ID error");
7276 perror(ME "SG_SET_SCSI_ID error");
7321 fprintf(stderr, ME "if=%s skip=%d of=%s seek=%d count=%d\n",
7331 ME "unable to use scsi tape device %s\n", inf);
7336 ME "could not open %s for sg reading",
7347 ME "could not open %s for reading",
7358 ME
7372 ME "unable to use scsi tape device %s\n", outf);
7377 ME "could not open %s for sg writing",
7394 ME
7403 ME
7417 ME