Lines Matching defs:dpi
640 /* we set up to the lowest available dpi value */
1397 SANE_Int dpi; /* dpi for scan */
1406 dpi = session->val[OPT_RESOLUTION].w;
1433 session->params.lines = ((br_y - tl_y) * dpi) / MM_PER_INCH;
1436 session->params.pixels_per_line = ((br_x - tl_x) * dpi) / MM_PER_INCH;
1466 dev->xdpi = dpi;
1467 dev->ydpi = dpi;
1469 /* handle bounds of motor's dpi range */
1473 dev->lines = (dev->lines * dev->model->max_ydpi) / dpi;
1486 dev->lines = (dev->lines * dev->model->min_ydpi) / dpi;
1586 /* 1200 and 600 dpi scans seems to have other timings that
1777 /* byte length for high dpi mode */
1995 /* we currently handle ydi=2*dpi */
2619 * ydpi list, or even allow for independent X and Y dpi (with 2 options then)
2638 /* initial value is lowest available dpi */
4604 * currently done at 75 dpi regardless of the final scan dpi.
5218 * at 75 dpi regardless of the dpi of the final scan. We loop scanning a 637
5468 /* we default to 75 dpi then override needed registers */
5558 "setup_shading_calibration: setting up SENSOR_TYPE_XPA for 150 dpi\n");
5591 "setup_shading_calibration: setting up SENSOR_TYPE_BARE for 150 dpi\n");
5620 "setup_shading_calibration: setting up SENSOR_TYPE_4400 for 150 dpi\n");
5652 "setup_shading_calibration: setting up SENSOR_TYPE_4400_BARE for 150 dpi\n");
5694 "setup_shading_calibration: setting up SENSOR_TYPE_XPA for 300 dpi\n");
5728 "setup_shading_calibration: setting up SENSOR_TYPE_BARE for 300 dpi\n");
5762 "setup_shading_calibration: setting up SENSOR_TYPE_4400 for 300 dpi\n");
5796 "setup_shading_calibration: setting up SENSOR_TYPE_4400_BARE for 300 dpi\n");
5807 "setup_shading_calibration: setting up SENSOR_TYPE_BARE for 600 dpi\n");
5848 "setup_shading_calibration: setting up SENSOR_TYPE_XPA for 600 dpi\n");
5899 "setup_shading_calibration: setting up SENSOR_TYPE_4400 for 600 dpi\n");
5950 "setup_shading_calibration: setting up SENSOR_TYPE_4400_BARE for 600 dpi\n");
5961 "setup_shading_calibration: setting up SENSOR_TYPE_BARE for 1200 dpi\n");
6003 "setup_shading_calibration: setting up SENSOR_TYPE_XPA for 1200 dpi\n");
6052 "setup_shading_calibration: setting up SENSOR_TYPE_4400 for 1200 dpi\n");
6100 "setup_shading_calibration: setting up SENSOR_TYPE_4400_BARE for 1200 dpi\n");
6293 /* 5400 pixels at max sensor 600 dpi */
6317 * 5400 max shading coefficients at 600 dpi repeated 3 times
6507 /* move at dev->model->min_ydpi dpi up to the scanning area. Which speeds
6549 /* For now, the only mode that could be done would be 300 dpi gray scan, */
6593 /* default to 75 dpi color scan */
6958 DBG (DBG_io, "setup_scan_registers: setting up SENSOR_TYPE_XPA for 150 dpi\n");
6982 DBG (DBG_io, "setup_scan_registers: setting up SENSOR_TYPE_BARE for 150 dpi\n");
7001 DBG (DBG_io, "setup_scan_registers: setting up SENSOR_TYPE_4400 for 150 dpi\n");
7052 DBG (DBG_io, "setup_scan_registers: setting up SENSOR_TYPE_XPA for 300 dpi\n");
7102 DBG (DBG_io, "setup_scan_registers: setting up SENSOR_TYPE_BARE for 300 dpi\n");
7151 DBG (DBG_io, "setup_scan_registers: setting up SENSOR_TYPE_4400 for 300 dpi\n");
7204 DBG (DBG_io, "setup_scan_registers: setting up SENSOR_TYPE_BARE for 600 dpi\n");
7259 DBG (DBG_io, "setup_scan_registers: setting up SENSOR_TYPE_XPA for 600 dpi\n");
7327 DBG (DBG_io, "setup_scan_registers: setting up SENSOR_TYPE_4400 for 600 dpi\n");
7391 DBG (DBG_io, "setup_scan_registers: setting up SENSOR_TYPE_4400_BARE for 600 dpi\n");
7401 DBG (DBG_io, "setup_scan_registers: setting up SENSOR_TYPE_BARE for 1200 dpi\n");
7414 regs[0x8d] = 0xbd; /* about twice the 600 dpi values */
7458 DBG (DBG_io, "setup_scan_registers: setting up SENSOR_TYPE_XPA for 1200 dpi\n");
7520 DBG (DBG_io, "setup_scan_registers: setting up SENSOR_TYPE_4400 for 1200 dpi\n");
7584 DBG (DBG_io, "setup_scan_registers: setting up SENSOR_TYPE_4400_BARE for 1200 dpi\n");
7614 /* For now, the only mode that could be done would be 300 dpi gray scan, */