Lines Matching refs:DBG
99 DBG (5, "mustek_scsi_pp_select_register: selecting register %d on fd %d\n",
113 DBG (5, "mustek_scsi_pp_wait_for_valid_status: entering\n");
121 DBG (2,
130 DBG (5,
137 DBG (2, "mustek_scsi_pp_wait_for_valid_status: timed out\n");
147 DBG (5, "mustek_scsi_pp_wait_for_status_bit_5_set: entering\n");
155 DBG (2, "mustek_scsi_pp_wait_for_status_bit_5_set: I/O error\n");
160 DBG (5,
167 DBG (2, "mustek_scsi_pp_wait_for_status_bit_5_set: timed out\n");
177 DBG (5, "mustek_scsi_pp_wait_for_status_bit_5_clear: entering\n");
185 DBG (2, "mustek_scsi_pp_wait_for_status_bit_5_clear: I/O error\n");
191 DBG (5,
198 DBG (2, "mustek_scsi_pp_wait_for_status_bit_5_clear: timed out\n");
208 DBG (5, "mustek_scsi_pp_wait_for_status_bit_7_set: entering\n");
215 DBG (2, "mustek_scsi_pp_wait_for_status_bit_7_set: I/O error\n");
220 DBG (5,
228 DBG (2, "mustek_scsi_pp_wait_for_status_bit_7_set: timed out\n");
238 DBG (5, "mustek_scsi_pp_wait_for_status_bit_7_clear: entering\n");
245 DBG (2, "mustek_scsi_pp_wait_for_status_bit_7_clear: I/O error\n");
250 DBG (5,
258 DBG (2, "mustek_scsi_pp_wait_for_status_bit_7_clear: timed out\n");
268 DBG (5, "mustek_scsi_pp_wait_for_status_bit_4_set: entering\n");
272 DBG (2, "mustek_scsi_pp_wait_for_status_bit_4_set: I/O error\n");
278 DBG (5,
288 DBG (2, "mustek_scsi_pp_wait_for_status_bit_4_set: I/O error\n");
293 DBG (2, "mustek_scsi_pp_wait_for_status_bit_4_set: bit 6 set\n");
298 DBG (5,
305 DBG (2, "mustek_scsi_pp_wait_for_status_bit_4_set: timed out\n");
315 DBG (5, "mustek_scsi_pp_wait_for_status_bit_4_clear: entering\n");
319 DBG (2, "mustek_scsi_pp_wait_for_status_bit_4_clear: I/O error\n");
325 DBG (5,
335 DBG (2, "mustek_scsi_pp_wait_for_status_bit_4_clear: I/O error\n");
340 DBG (2, "mustek_scsi_pp_wait_for_status_bit_4_clear: bit 6 set\n");
345 DBG (5,
352 DBG (2, "mustek_scsi_pp_wait_for_status_bit_4_clear: timed out\n");
363 DBG (5, "mustek_scsi_pp_wait_for_status_bit_4_toggle: entering\n");
368 DBG (5,
375 DBG (5,
386 DBG (5, "mustek_scsi_pp_send_command byte: sending 0x%02X\n", cmd);
411 DBG (5, "mustek_scsi_pp_send_command_byte: returning success\n");
420 DBG (5, "mustek_scsi_pp_read_response: entering\n");
448 DBG (5, "mustek_scsi_pp_read_response: returning 0x%02X\n", result);
462 DBG (2, "mustek_scsi_pp_check_response: response!=0xA5\n");
466 DBG (5, "mustek_scsi_pp_check_response: returning success\n");
476 DBG (5, "mustek_scsi_pp_send_command: sending SCSI command 0x%02X\n",
501 DBG (2,
511 DBG (2,
520 DBG (2,
534 DBG (5, "mustek_scsi_pp_send_data_block: sending block of length %d\n",
539 DBG (2,
549 DBG (2,
558 DBG (2,
572 DBG (5, "mustek_scsi_pp_read_data_block: reading block of length %d\n",
577 DBG (2,
591 DBG (2, "mustek_scsi_pp_read_data_block: checksums do not match\n");
596 DBG (2,
603 DBG (2, "mustek_scsi_pp_read_data_block: error sending final 0 byte\n");
607 DBG (5, "mustek_scsi_pp_read_data_block: returning success\n");
624 DBG (5, "mustek_scsi_pp_open: device %s opened as fd %d\n", dev, *fd);
628 DBG (2, "mustek_scsi_pp_open: error opening device %s\n", dev);
636 DBG (5, "mustek_scsi_pp_close: closing fd %d\n", fd);
643 DBG (5, "mustek_scsi_pp_exit: entering\n");
652 DBG (5, "mustek_scsi_pp_test_ready: entering with fd=%d\n", fd);
656 DBG (2, "mustek_scsi_pp_test_ready: error enabling scanner\n");
662 DBG (2, "mustek_scsi_pp_test_ready: error getting status\n");
686 DBG (2, "mustek_scsi_pp_test_ready: error disabling scanner\n");
692 DBG (5, "mustek_scsi_pp_test_ready: returning SANE_STATUS_GOOD\n");
696 DBG (5,
718 DBG (5, "mustek_scsi_pp_cmd: sending command 0x%02X to device %d\n",
723 DBG (2, "mustek_scsi_pp_cmd: error enabling scanner\n");
734 DBG (5, "mustek_scsi_pp_cmd: doing stop-specific stuff\n");
754 DBG (2, "mustek_scsi_pp_cmd: error in readbegin for stop\n");
761 DBG (2,
765 DBG (5, "mustek_scsi_pp_cmd: successfully read byte %d\n", i);
769 DBG (2, "mustek_scsi_pp_cmd: error in readend for stop\n");
776 DBG (5, "mustek_scsi_pp_cmd: doing read-specific stuff\n");
788 DBG (2, "mustek_scsi_pp_cmd: source size is only %lu (<6)\n", (u_long) src_size);
806 DBG (2, "mustek_scsi_pp_cmd: sending command failed\n");
812 DBG (5, "mustek_scsi_pp_cmd: sending data block of length %lu\n",
821 DBG (2, "mustek_scsi_pp_cmd: sending data block failed\n");
834 DBG (5, "mustek_scsi_pp_cmd: reading %d bytes\n", length);
839 DBG (2,
848 DBG (2, "mustek_scsi_pp_cmd: error reading data block\n");
856 DBG (5, "mustek_scsi_pp_cmd: doing start-specific stuff\n");
866 DBG (2,
874 DBG (2, "mustek_scsi_pp_cmd: error disabling scanner\n");
880 DBG (5, "mustek_scsi_pp_cmd: returning success\n");
891 DBG (5,
897 DBG (2, "mustek_scsi_pp_rdata: invalid number of planes (%d)\n",
904 DBG (2, "mustek_scsi_pp_rdata: error enabling scanner\n");
916 DBG (2,
925 DBG (2,
936 DBG (2,
945 DBG (2,
956 DBG (2,
965 DBG (2,
977 DBG (2,
986 DBG (2,
997 DBG (2,
1006 DBG (2,
1018 DBG (2,
1027 DBG (2,
1039 DBG (2,
1048 DBG (2, "mustek_scsi_pp_rdata: error in readbegin, line %d\n",
1059 DBG (2,
1069 DBG (2, "mustek_scsi_pp_rdata: error in readend, line %d\n", i);
1078 DBG (2, "mustek_scsi_pp_rdata: error enabling scanner\n");
1082 DBG (5, "mustek_scsi_pp_rdata: returning success\n");