Lines Matching refs:start
262 rts88xx_write_regs (SANE_Int devnum, SANE_Int start, SANE_Byte * source,
269 if ((start + length > 0xb3) && (length > 1))
271 size = 0xb3 - start;
280 start = 0xb4;
341 DBG (2, "rts88xx_commit: start\n");
353 /* effective start */
467 DBG (2, "low_init: start\n");
944 DBG (2, "low_cancel: start\n");
960 DBG (2, "low_start_scan: start\n");
977 /* then start */
1043 DBG (2, "low_simple_scan: start\n");
1077 /* start scan */
1320 of the buffer and check a region from bytes 5 to 2495. We start assuming
1321 we are in a white region and look for the start of a black region. We save
1363 DBG (15, "low_is_home_line: start\n");
1535 /* set vertical start/end positions */
1540 /* set horizontal start position */
1640 /* this is needed to find the start line properly */
1824 /* set vertical start/end positions */
1833 /* set horizontal start position */
2092 /* set vertical start/end positions */
2099 /* set horizontal start position */
2374 /* Calculate vertical start distance at 600dpi */
2430 /* set vertical start position registers */
2471 It assumes we are in the start dot, or just before it. We are reading
2633 /* set vertical start/end positions */
2640 /* set horizontal start position */
4870 /* We start with 0 bytes remaining to be read */
5112 /* first move to start of scanning area */
5540 DBG (2, "sanei_lexmark_low_offset_calibration: start\n");
5556 we start with the highest one and decrease until
5680 DBG (2, "sanei_lexmark_low_gain_calibration: start\n");
5758 * start position.
5777 DBG (2, "sanei_lexmark_low_shading_calibration: start\n");
5883 bottom of "home position" dot and the start of the scanner's window
5932 /* do the scan backward to go back to start position */
5966 DBG (2, "sanei_lexmark_low_calibration: start.\n");
6062 DBG (2, "sanei_lexmark_low_assign_model: start\n");