Lines Matching refs:motor
120 dev->reg.init_reg(0x1e, 0xf0); // WDTIME, LINESEL: set during sensor and motor setup
134 dev->reg.init_reg(0x21, 0x10); // STEPNO: set during motor setup
135 dev->reg.init_reg(0x22, 0x60); // FWDSTEP: set during motor setup
136 dev->reg.init_reg(0x23, 0x60); // BWDSTEP: set during motor setup
137 dev->reg.init_reg(0x24, 0x60); // FASTNO: set during motor setup
138 dev->reg.init_reg(0x25, 0x00); // LINCNT: set during motor setup
139 dev->reg.init_reg(0x26, 0x00); // LINCNT: set during motor setup
140 dev->reg.init_reg(0x27, 0x00); // LINCNT: set during motor setup
163 dev->reg.init_reg(0x3d, 0x00); // FEEDL: set during motor setup
164 dev->reg.init_reg(0x3e, 0x00); // FEEDL: set during motor setup
165 dev->reg.init_reg(0x3f, 0x01); // FEEDL: set during motor setup
183 dev->reg.init_reg(0x5f, 0x01); // FMOVDEC: overwritten during motor setup
184 dev->reg.init_reg(0x60, 0x00); // STEPSEL, Z1MOD: overwritten during motor setup
185 dev->reg.init_reg(0x61, 0x00); // Z1MOD: overwritten during motor setup
186 dev->reg.init_reg(0x62, 0x00); // Z1MOD: overwritten during motor setup
187 dev->reg.init_reg(0x63, 0x00); // FSTPSEL, Z2MOD: overwritten during motor setup
188 dev->reg.init_reg(0x64, 0x00); // Z2MOD: overwritten during motor setup
189 dev->reg.init_reg(0x65, 0x00); // Z2MOD: overwritten during motor setup
190 dev->reg.init_reg(0x67, 0x7f); // MTRPWM: overwritten during motor setup
191 dev->reg.init_reg(0x68, 0x7f); // FASTPWM: overwritten during motor setup
192 dev->reg.init_reg(0x69, 0x01); // FSHDEC: overwritten during motor setup
193 dev->reg.init_reg(0x6a, 0x01); // FMOVNO: overwritten during motor setup
215 dev->reg.init_reg(0x80, 0x4f); // overwritten during motor setup
218 // MTRPLS: pulse width of ADF motor trigger signal
337 // @brief set up motor related register for scan
380 auto scan_table = create_slope_table(dev->model->asic_type, dev->motor, scan_yres,
392 const auto* fast_profile = get_motor_profile_ptr(dev->motor.fast_profiles, 0, session);
436 /* hi res motor speed GPIO */
645 const auto& motor_profile = get_motor_profile(dev->motor.profiles, exposure_time, session);
676 unsigned move_dpi = dev->motor.base_ydpi;
798 unsigned move_dpi = dev->motor.base_ydpi;
1021 * initialize backend and ASIC : registers, motor tables, and gamma tables