Lines Matching defs:color
91 2002-11-23 Fixed problem with dropout color.
127 Allow more than 8 bit color depth even for preview mode
151 for the "color shuffling" part.
183 2000-12-03 Fixed off-by-one error in color reordering function.
186 Add support for color depth > 8 bits per channel.
204 2000-05-28 Turned on scanner based color correction.
220 2000-05-13 Fixed the color problem with the Perfection 610. The few
240 mode (automatically deals with the order the color
284 started support for user defined color correction -
409 * | | | | set color mode
418 * | | | | | | | | | | | | | set color correction
426 * | | | | | | | | | | | | | | | | | | | | | set color correction coefficients
469 int color;
607 * and one array to mark the user defined color correction (dolor_userdefined[]).
1203 * scan area. This scan area is already corrected for "color shuffling" if
1250 * Sends the "set color correction coefficients" command with the currently selected
2241 * Check for the max. supported color depth and assign
2284 DBG (1, "Max. supported color depth = %d\n", s->hw->maxDepth);
3027 /* color correction */
3028 s->opt[OPT_COLOR_CORRECTION].name = "color-correction";
3032 ("Sets the color correction table for the selected output device.");
3079 /* color correction coefficients */
3789 AAS is available when the scan color depth is 1 and the
4033 SANE_Bool isColor = mode_params[optindex].color;
4220 * requests information aobut the scan configuration (e.g. color depth, mode,
4277 * Make sure that the number of lines is correct for color shuffling:
4305 * any color depths.
4307 * The default color depth is stored in mode_params.depth:
4323 * for gray or color - so if it's more than 8,
4327 * per color channel.
4343 if (mode_params[s->val[OPT_MODE].w].color)
4654 * value from the table (0x01), for grayscale or color mode
4852 * Modify the scan area: If the scanner requires color shuffling, then we try to
4854 * due to the color shuffling algorithm.
4899 * color mode. The D1 level requires it, we are however only testing for
4905 (!mode_params[s->val[OPT_MODE].w].color))))
5283 DBG (1, "Written %d lines after color shuffle\n", s->lines_written);
5316 * Read color data in line mode
5321 * read the first color line - the number of bytes to read
5323 * We determine where to write the line from the color information
5480 * if we have to re-order the color components (GRB->RGB) we
5501 * color channels. These scanners are identified by the problem