Lines Matching defs:SANE_I18N
124 #ifndef SANE_I18N
125 #define SANE_I18N(text) text
147 SANE_I18N("Raw"), 0
155 SANE_I18N("Fine color"), 0
167 SANE_I18N("No transparency correction"),
168 SANE_I18N("Correction according to film type"),
169 SANE_I18N("Correction according to transparency ratio"),
174 SANE_I18N("Negatives"), SANE_I18N("Slides"),
184 SANE_I18N("Automatic"), SANE_I18N("Normal speed"),
185 SANE_I18N("1/2 normal speed"), SANE_I18N("1/3 normal speed"),
358 sense_str = SANE_I18N("rounded parameter");
361 sense_str = SANE_I18N("unknown");
371 sense_str = SANE_I18N("ADF jam");
374 sense_str = SANE_I18N("ADF cover open");
377 sense_str = SANE_I18N("unknown");
387 sense_str = SANE_I18N("lamp failure");
390 sense_str = SANE_I18N("scan head positioning error");
393 sense_str = SANE_I18N("CPU check error");
396 sense_str = SANE_I18N("RAM check error");
399 sense_str = SANE_I18N("ROM check error");
402 sense_str = SANE_I18N("hardware check error");
405 sense_str = SANE_I18N("transparency unit lamp failure");
408 sense_str = SANE_I18N("transparency unit scan head "
412 sense_str = SANE_I18N("unknown");
422 sense_str = SANE_I18N("parameter list length error");
426 sense_str = SANE_I18N("invalid command operation code");
430 sense_str = SANE_I18N("invalid field in CDB");
434 sense_str = SANE_I18N("unsupported LUN");
438 sense_str = SANE_I18N("invalid field in parameter list");
442 sense_str = SANE_I18N("command sequence error");
446 sense_str = SANE_I18N("too many windows specified");
450 sense_str = SANE_I18N("medium not present");
454 sense_str = SANE_I18N("invalid bit IDENTIFY message");
458 sense_str = SANE_I18N("option not correct");
462 sense_str = SANE_I18N("unknown");
472 sense_str = SANE_I18N("power on reset / bus device reset");
476 sense_str = SANE_I18N("parameter changed by another initiator");
480 sense_str = SANE_I18N("unknown");
490 sense_str = SANE_I18N("no additional sense information");
494 sense_str = SANE_I18N("reselect failure");
498 sense_str = SANE_I18N("SCSI parity error");
502 sense_str = SANE_I18N("initiator detected error message "
507 sense_str = SANE_I18N("invalid message error");
511 sense_str = SANE_I18N("timeout error");
515 sense_str = SANE_I18N("transparency unit shading error");
519 sense_str = SANE_I18N("lamp not stabilized");
523 sense_str = SANE_I18N("unknown");
844 dev->sane.type = SANE_I18N("film scanner");
860 dev->sane.type = SANE_I18N("film scanner");
876 dev->sane.type = SANE_I18N("flatbed scanner");
892 dev->sane.type = SANE_I18N("flatbed scanner");
907 dev->sane.type = SANE_I18N("flatbed scanner");
922 dev->sane.type = SANE_I18N("flatbed scanner");
1154 s->opt[OPT_MODE_GROUP].title = SANE_I18N("Scan mode");
1192 s->opt[OPT_NEGATIVE].title = SANE_I18N("Film type");
1193 s->opt[OPT_NEGATIVE].desc = SANE_I18N("Selects the film type, i.e. "
1205 s->opt[OPT_NEGATIVE_TYPE].title = SANE_I18N("Negative film type");
1206 s->opt[OPT_NEGATIVE_TYPE].desc = SANE_I18N("Selects the negative film type");
1230 s->opt[OPT_RESOLUTION_GROUP].title = SANE_I18N("Scan resolution");
1245 s->opt[OPT_HW_RESOLUTION_ONLY].title = SANE_I18N("Hardware resolution");
1246 s->opt[OPT_HW_RESOLUTION_ONLY].desc = SANE_I18N("Use only hardware "
1327 s->opt[OPT_FOCUS_GROUP].title = SANE_I18N("Focus");
1337 s->opt[OPT_AF].title = SANE_I18N("Auto focus");
1338 s->opt[OPT_AF].desc = SANE_I18N("Enable/disable auto focus");
1345 s->opt[OPT_AF_ONCE].title = SANE_I18N("Auto focus only once");
1346 s->opt[OPT_AF_ONCE].desc = SANE_I18N("Do auto focus only once between "
1354 s->opt[OPT_FOCUS].title = SANE_I18N("Manual focus position");
1355 s->opt[OPT_FOCUS].desc = SANE_I18N("Set the optical system's focus "
1365 s->opt[OPT_MARGINS_GROUP].title = SANE_I18N("Scan margins");
1412 s->opt[OPT_COLORS_GROUP].title = SANE_I18N("Extra color adjustments");
1507 s->opt[OPT_ENHANCEMENT_GROUP].title = SANE_I18N("Enhancement");
1547 s->opt[OPT_MIRROR].title = SANE_I18N("Mirror image");
1548 s->opt[OPT_MIRROR].desc = SANE_I18N("Mirror the image horizontally");
1617 s->opt[OPT_AE].title = SANE_I18N("Auto exposure");
1618 s->opt[OPT_AE].desc = SANE_I18N("Enable/disable the auto exposure feature");
1625 s->opt[OPT_CALIBRATION_GROUP].title = SANE_I18N("Calibration");
1634 s->opt[OPT_CALIBRATION_NOW].title = SANE_I18N("Calibration now");
1635 s->opt[OPT_CALIBRATION_NOW].desc = SANE_I18N("Execute calibration *now*");
1645 s->opt[OPT_SCANNER_SELF_DIAGNOSTIC].title = SANE_I18N("Self diagnosis");
1646 s->opt[OPT_SCANNER_SELF_DIAGNOSTIC].desc = SANE_I18N("Perform scanner "
1657 s->opt[OPT_RESET_SCANNER].title = SANE_I18N("Reset scanner");
1658 s->opt[OPT_RESET_SCANNER].desc = SANE_I18N("Reset the scanner");
1668 s->opt[OPT_EJECT_GROUP].title = SANE_I18N("Medium handling");
1677 s->opt[OPT_EJECT_AFTERSCAN].title = SANE_I18N("Eject film after each scan");
1678 s->opt[OPT_EJECT_AFTERSCAN].desc = SANE_I18N("Automatically eject the "
1689 s->opt[OPT_EJECT_BEFOREEXIT].title = SANE_I18N("Eject film before exit");
1690 s->opt[OPT_EJECT_BEFOREEXIT].desc = SANE_I18N("Automatically eject the "
1699 s->opt[OPT_EJECT_NOW].title = SANE_I18N("Eject film now");
1700 s->opt[OPT_EJECT_NOW].desc = SANE_I18N("Eject the film *now*");
1709 s->opt[OPT_ADF_GROUP].title = SANE_I18N("Document feeder extras");
1716 s->opt[OPT_FLATBED_ONLY].title = SANE_I18N("Flatbed only");
1717 s->opt[OPT_FLATBED_ONLY].desc = SANE_I18N("Disable auto document feeder "
1727 s->opt[OPT_TPU_GROUP].title = SANE_I18N("Transparency unit");
1737 s->opt[OPT_TPU_ON].title = SANE_I18N("Transparency unit");
1738 s->opt[OPT_TPU_ON].desc = SANE_I18N("Switch on/off the transparency unit "
1748 s->opt[OPT_TPU_PN].title = SANE_I18N("Negative film");
1749 s->opt[OPT_TPU_PN].desc = SANE_I18N("Positive or negative film");
1758 s->opt[OPT_TPU_DCM].title = SANE_I18N("Density control");
1759 s->opt[OPT_TPU_DCM].desc = SANE_I18N("Set density control mode");
1770 s->opt[OPT_TPU_TRANSPARENCY].title = SANE_I18N("Transparency ratio");
1784 s->opt[OPT_TPU_FILMTYPE].title = SANE_I18N("Select film type");
1785 s->opt[OPT_TPU_FILMTYPE].desc = SANE_I18N("Select the film type");