Lines Matching refs:DPRINTFN
184 DPRINTFN(2, "\n");
427 DPRINTFN(6, "cannot reset root HUB\n");
446 DPRINTFN(0, "Could not unconfigure "
451 DPRINTFN(6, "cannot set port feature\n");
458 DPRINTFN(0, "Could not disable port "
560 DPRINTFN(4, "port %d, HUB looks dead, too many errors\n", portno);
581 DPRINTFN(4, "port %d, wPortStatus=0x%04x, "
707 DPRINTFN(3," %s : Nothing connected!\n", __FUNCTION__);
768 DPRINTFN(0, "port %d reset "
784 DPRINTFN(0, "giving up port %d reset - "
848 DPRINTFN(0, "port %d U1 timeout "
855 DPRINTFN(0, "port %d U2 timeout "
878 DPRINTFN(0, "could not allocate new device\n");
899 DPRINTFN(0, "device problem (%s), "
1067 DPRINTFN(11, "udev=%p addr=%d\n", udev, udev->address);
1122 DPRINTFN(0, "illegal enable change, "
1127 DPRINTFN(0, "port error, giving up "
1212 DPRINTFN(0, "getting USB 2.0 HUB descriptor failed,"
1227 DPRINTFN(0, "Getting USB 3.0 HUB descriptor failed,"
1286 DPRINTFN(2, "depth=%d selfpowered=%d, parent=%p, "
1295 DPRINTFN(0, "HUB at depth %d, "
1302 DPRINTFN(0, "Bus powered HUB connected to "
1324 DPRINTFN(2, "Getting HUB descriptor\n");
1333 DPRINTFN(0, "getting USB 2.0 HUB descriptor failed,"
1348 DPRINTFN(0, "Invalid number of USB 2.0 ports,"
1356 DPRINTFN(0, "Getting USB 2.0 HUB descriptor failed,"
1361 DPRINTFN(0, "Number of ports changed\n");
1371 DPRINTFN(0, "Setting USB 3.0 HUB depth failed,"
1378 DPRINTFN(0, "Getting USB 3.0 HUB descriptor failed,"
1393 DPRINTFN(0, "Invalid number of USB 3.0 ports,"
1401 DPRINTFN(0, "Getting USB 2.0 HUB descriptor failed,"
1406 DPRINTFN(0, "Number of ports changed\n");
1420 DPRINTFN(0, "portless HUB\n");
1464 DPRINTFN(0, "cannot setup interrupt transfer, "
1531 DPRINTFN(0, "port %d power on failed, %s\n",
2052 DPRINTFN(11, "slot=%d, mask=0x%02x\n",
2089 DPRINTFN(11, "slot=%d, mask=0x%02x\n",
2320 DPRINTFN(2, "bus %p devices[%u] = %p\n", bus, device_index, udev);
2408 DPRINTFN(3, "\n");
2412 DPRINTFN(0, "no devclass\n");
2770 DPRINTFN(0, "Resuming port failed: %s (ignored)\n",
2817 DPRINTFN(0, "Clearing device "
2869 DPRINTFN(1, "Port %u is busy on the HUB!\n", x + 1);
2883 DPRINTFN(0, "Setting device "
2913 DPRINTFN(0, "Setting device "
2929 DPRINTFN(0, "Clear Feature "
2963 DPRINTFN(0, "Suspending port failed\n");
2971 DPRINTFN(0, "Suspending port failed\n");