Lines Matching refs:DPRINTF
250 DPRINTF("\n");
254 DPRINTF("Command ring running\n");
276 DPRINTF("Comand ring still running\n");
292 DPRINTF("CRCR=0x%016llx\n", (unsigned long long)addr);
316 DPRINTF("\n");
341 DPRINTF("CONFIG=0x%08x -> 0x%08x\n",
382 DPRINTF("ERSTSZ=0x%08x -> 0x%08x\n",
406 DPRINTF("ERDP(0)=0x%016llx\n", (unsigned long long)addr);
413 DPRINTF("ERSTBA(0)=0x%016llx\n", (unsigned long long)addr);
427 DPRINTF("CRCR=0x%016llx\n", (unsigned long long)addr);
469 DPRINTF("\n");
499 DPRINTF("\n");
525 DPRINTF("\n");
550 DPRINTF("CAPLENGTH=0x%x\n", sc->sc_oper_off);
551 DPRINTF("RUNTIMEOFFSET=0x%x\n", sc->sc_runt_off);
552 DPRINTF("DOOROFFSET=0x%x\n", sc->sc_door_off);
554 DPRINTF("xHCI version = 0x%04x\n", XREAD2(sc, capa, XHCI_HCIVERSION));
564 DPRINTF("HCS0 = 0x%08x\n", temp);
593 DPRINTF("Max slots: %u\n", sc->sc_noslot);
600 DPRINTF("HCS2=0x%08x\n", temp);
611 DPRINTF("Max scratch: %u\n", sc->sc_noscratch);
668 DPRINTF("Stopping the XHCI\n");
673 DPRINTF("Stopping the XHCI\n");
678 DPRINTF("Starting the XHCI\n");
718 DPRINTF("Invalid status length, "
885 DPRINTF("slot=%u epno=%u remainder=%u status=%u\n",
889 DPRINTF("Invalid slot.\n");
894 DPRINTF("Invalid endpoint.\n");
972 DPRINTF("TD is last\n");
982 DPRINTF("TD has I/O error\n");
993 DPRINTF(
998 DPRINTF("TD has short pkt\n");
1015 DPRINTF("Following next TD\n");
1027 DPRINTF("Received command event\n");
1085 DPRINTF("Unhandled event = %u\n", event);
1213 DPRINTF("Command was completed when polling\n");
1217 DPRINTF("Command timeout!\n");
1237 DPRINTF("Set address timeout\n");
1243 DPRINTF("Controller reset!\n");
1274 DPRINTF("\n");
1298 DPRINTF("\n");
1317 DPRINTF("\n");
1372 DPRINTF("Could not configure device\n");
1404 DPRINTF("Could not configure default endpoint\n");
1423 DPRINTF("Could not set address "
1447 DPRINTF("Wrong state for set address.\n");
1466 DPRINTF("\n");
1488 DPRINTF("\n");
1506 DPRINTF("\n");
1529 DPRINTF("\n");
1551 DPRINTF("\n");
1573 DPRINTF("\n");
1645 DPRINTF("xfer=%p\n", xfer);
1888 DPRINTF("NTRB=%u\n", x);
1895 DPRINTF("LINK=0x%08llx\n", (long long)td_next->td_self);
1898 DPRINTF("NOLINK\n");
2020 DPRINTF("MFINDEX=0x%08x\n", x);
2216 DPRINTF("first=%p last=%p\n", xfer->td_transfer_first, td);
2229 DPRINTF("addr[%u]=0x%016llx\n", index, (long long)dev_addr);
2511 DPRINTF("index=%u\n", index);
2547 DPRINTF("Route=0x%08x\n", route);
2559 DPRINTF("Device inherits MTT\n");
2567 DPRINTF("HUB supports MTT\n");
2576 DPRINTF("Device inherits MTT\n");
2963 DPRINTF("qh_pos = %u\n", i);
2994 DPRINTF("port %d changed\n", i);
3040 DPRINTF("\n");
3093 DPRINTF("\n");
3105 DPRINTF("\n");
3813 DPRINTF("Could not stop endpoint %u\n", epno);
3818 DPRINTF("Could not reset endpoint %u\n", epno);
3826 DPRINTF("Could not set dequeue ptr for endpoint %u\n", epno);
3841 DPRINTF("Could not configure endpoint %u\n", epno);
3981 DPRINTF("\n");
4032 DPRINTF("slot %u already allocated.\n", temp);
4104 DPRINTF("\n");
4138 DPRINTF("\n");
4153 DPRINTF("Failed to suspend endpoint "
4164 DPRINTF("\n");
4181 DPRINTF("\n");
4206 DPRINTF("Device reset failed "
4223 DPRINTF("Failed to deconfigure "
4244 DPRINTF("Could not configure device "
4250 DPRINTF("Could not evaluate device "