Lines Matching defs:LOGNAME
61 # define LOGNAME "msnd_classic"
65 # define LOGNAME "snd_msnd_pinnacle"
124 snd_printd(KERN_WARNING LOGNAME ": Play underflow %i\n",
131 snd_printd(KERN_WARNING LOGNAME ": Record overflow\n");
136 snd_printd(KERN_WARNING LOGNAME
149 snd_printd(KERN_WARNING LOGNAME ": HIMT message %d 0x%02x\n",
200 snd_printk(KERN_ERR LOGNAME ": Cannot reset DSP\n");
216 snd_printk(KERN_ERR LOGNAME ": I/O port conflict\n");
228 printk(KERN_INFO LOGNAME ": %s, "
288 printk(KERN_INFO LOGNAME ": %s revision %s, Xilinx version %s, "
380 printk(KERN_ERR LOGNAME ": Error loading " INITCODEFILE);
385 printk(KERN_ERR LOGNAME ": Error loading " PERMCODEFILE);
391 printk(KERN_WARNING LOGNAME ": Error uploading to DSP\n");
395 printk(KERN_INFO LOGNAME ": DSP firmware uploaded\n");
428 printk(KERN_WARNING LOGNAME ": Cannot initialize SMA\n");
438 printk(KERN_WARNING LOGNAME ": Cannot upload DSP code\n");
447 snd_printd(KERN_ERR LOGNAME ": DSP reset timeout\n");
469 printk(KERN_WARNING LOGNAME ": DSP reset failed\n");
499 printk(KERN_WARNING LOGNAME ": ADC calibration failed\n");
530 printk(KERN_ERR LOGNAME ": Couldn't grab IRQ %d\n", chip->irq);
540 printk(KERN_ERR LOGNAME
547 printk(KERN_ERR LOGNAME
559 printk(KERN_ERR LOGNAME ": error creating new PCM device\n");
565 printk(KERN_ERR LOGNAME ": error creating new Mixer device\n");
580 printk(KERN_ERR LOGNAME
612 printk(KERN_ERR LOGNAME ": snd_msnd_write_cfg: I/O error\n");
701 printk(KERN_INFO LOGNAME ": Resetting all devices\n");
782 printk(KERN_WARNING LOGNAME ": io, irq and mem must be set\n");
795 printk(KERN_ERR LOGNAME ": \"io\" - DSP I/O base must be set "
802 printk(KERN_ERR LOGNAME
815 printk(KERN_ERR LOGNAME
826 printk(KERN_ERR LOGNAME ": \"mem\" - must be set to "
834 printk(KERN_INFO LOGNAME ": Assuming PnP mode\n");
836 printk(KERN_INFO LOGNAME
857 printk(KERN_INFO LOGNAME ": Assuming PnP mode\n");
900 printk(KERN_INFO LOGNAME ": Non-PnP mode: configuring at port 0x%lx\n",
905 printk(KERN_ERR LOGNAME ": Config port 0x%lx conflict\n",
926 printk(KERN_INFO LOGNAME
941 printk(KERN_INFO LOGNAME
954 printk(KERN_INFO LOGNAME
992 printk(KERN_ERR LOGNAME ": Probe failed\n");
998 printk(KERN_ERR LOGNAME ": Attach failed\n");
1101 printk(KERN_ERR LOGNAME ": Probe failed\n");
1107 printk(KERN_ERR LOGNAME ": Attach failed\n");