Lines Matching defs:time
159 * @orig_flags: channel flags at registration time, used by regulatory
173 * @dfs_cac_ms: DFS CAC time in milliseconds, this is valid for DFS channels.
1045 * @SURVEY_INFO_TIME: active time (in ms) was filled in
1046 * @SURVEY_INFO_TIME_BUSY: busy time was filled in
1047 * @SURVEY_INFO_TIME_EXT_BUSY: extension channel busy time was filled in
1048 * @SURVEY_INFO_TIME_RX: receive time was filled in
1049 * @SURVEY_INFO_TIME_TX: transmit time was filled in
1050 * @SURVEY_INFO_TIME_SCAN: scan time was filled in
1051 * @SURVEY_INFO_TIME_BSS_RX: local BSS receive time was filled in
1076 * @time: amount of time in ms the radio was turn on (on the channel)
1077 * @time_busy: amount of time the primary channel was sensed busy
1078 * @time_ext_busy: amount of time the extension channel was sensed busy
1079 * @time_rx: amount of time the radio spent receiving data
1080 * @time_tx: amount of time the radio spent transmitting data
1081 * @time_scan: amount of time the radio spent for scanning
1082 * @time_bss_rx: amount of time the radio spent receiving data on a local BSS
1091 u64 time;
1338 * @inactivity_timeout: time in seconds to determine station's inactivity.
1799 * @BSS_PARAM_FLAGS_SHORT_SLOT_TIME: whether short slot time is enabled
1882 * @connected_time: time(in secs) since a station is last connected
1883 * @inactive_time: time since last station activity (tx/rx) in milliseconds
1906 * This number should increase every time the list of stations
2157 * @exptime: expiration time for the mesh path from now, in msecs
2162 * This number should increase every time the list of mesh paths
2193 * @use_short_slot_time: Whether the use of short slot time is allowed
2242 * @min_discovery_timeout: the minimum length of time to wait until giving up on
2244 * @dot11MeshHWMPactivePathTimeout: the time (in TUs) for which mesh STAs
2246 * root to be valid. (TU = time unit)
2247 * @dot11MeshHWMPpreqMinInterval: the minimum interval of time (in TUs) during
2250 * @dot11MeshHWMPperrMinInterval: the minimum interval of time (in TUs) during
2253 * @dot11MeshHWMPnetDiameterTraversalTime: the interval of time (in TUs) that
2256 * @dot11MeshHWMPRannInterval: the interval of time (in TUs) between root
2270 * @dot11MeshHWMPactivePathToRootTimeout: The time (in TUs) for which mesh STAs
2274 * @dot11MeshHWMProotInterval: The interval of time (in TUs) between proactive
2276 * @dot11MeshHWMPconfirmationInterval: The minimum interval of time (in TUs)
2284 * peering with for longer than this time (in seconds), then remove it
2395 * @txop: Maximum burst time in units of 32 usecs, 0 meaning disabled
2447 * @scan_start_tsf: scan start time in terms of the TSF of the BSS that the
2494 * %duration_mandatory is not set, this is the maximum dwell time and
2495 * the actual dwell time may be shorter.
2501 * @scan_start: time (in jiffies) when the scan started
2627 * @scan_start: start time of the scheduled scan
2645 * immediately (or at any other time), if this feature is not
2715 * received; should match the time when the frame was actually
2720 * @parent_tsf: the time at the start of reception of the first octet of the
2721 * timestamp field of the frame. The time is the TSF of the BSS specified
3274 * @pmk_reauth_threshold: Threshold time for reauthentication (percentage of
3618 * @ttl: time to live counter in DW.
3732 * of how much time the responder was busy
3836 * @host_time: host time (use ktime_get_boottime() adjust to the time when the
3838 * @ap_tsf: AP's TSF at measurement time
3844 * one type at a time, but you can report multiple results separately and
4213 * @mgmt_tx_cancel_wait: Cancel the wait time from transmitting a management
4318 * If the admitted time is 0 just validate the parameters to make sure
5331 * @max_remain_on_channel_duration: Maximum time a remain-on-channel operation
5950 * @cac_time_ms: CAC time in ms
7164 * function when you detect a BSS is gone. Normally BSSes will also time
7981 * time it is accessed in __cfg80211_roamed() due to delay in scheduling